(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.
Brand |
|
---|---|
CAD |
|
Days to Ship |
|
253 itemsMặt hàng
You can add up to 6 items per a category to the compare list.
Parallel Tap for Pipes Spiral Tap SFT-SPT
OSG
A spiral hole is available for the blind hole according to the workpiece shape.
From: 596,390 VND |
---|
Days to Ship: Số ngày giao hàng: 20 Day(s) |
You can add up to 6 items per a category to the compare list.
ONISHI MANUFACTURING
[Features]· Impact drill compatible hexagonal shaft drilling tool for simultaneous pilot hole drilling and thread cutting work.[Applications]· For formation and modification of through-hole threads.· Work materials: Iron, aluminum, brass.[Features]· 1 unit enables pilot hole machining and thread cutting at the same time.· 6.35 mm hex shaft finish that supports impact drivers.· Drill cutting edge with good bite due to X-type thinning and outstanding sharpness
From: 797,501 VND |
---|
Days to Ship: Số ngày giao hàng: 9 Day(s) |
You can add up to 6 items per a category to the compare list.
TANOI MFG
Cold-forming tap with correct chamfer without pitch and angle errors.
From: 1,240,885 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Screw Thread Die For Gas Pipes, Taper NPT
SKC
[Features]Screw thread (die) used for machining male threads for American pipes in gas pipes.
From: 1,219,166 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Hand Taps for American Taper Pipe Threads_NPT
YAMAWA MFG
Tap for machining American taper pipe "NPT" female threads.[Features]· The groove is a straight hand tap type. Comes with three biting teeth at the tip.· General-purpose tap for general steel materials.[Applications]· To be used when machining American tapered pipe thread for pipes "NPT" female thread.* American standard pipe threads, available in many types, can be complicated.* Check carefully when purchasing taps, as there are various kinds available such as "NPT", "NPTF", "NPS", and "NPSF".
From: 609,510 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Spiral Pointed Taps for Left Hand Threads_PO-V
YAMAWA MFG
Coated point tap suitable for low carbon steel to high carbon steel machining.[Features]· Since it has a coating, stable processing is possible at medium cutting speeds, and the tool life is improved.[Applications]· Can process both synchronously and asynchronously.· Recommended for machining speeds of 10 to 20 m/min (completely synchronous feeding recommended for speeds of 15 m/min or higher).
From: 436,914 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Spiral Fluted Taps, Coated, Through Hole Use(with LH Spiral Flutes)_AU+SL
YAMAWA MFG
A coated spiral tap for through holes that provides sufficient performance for synchronous/asynchronous machining and enables stable threading in the mid-speed range (10 to 25 m/min).
From: 452,258 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Spiral Pointed Taps for Left Hand Threads_PO-LH
YAMAWA MFG
Point tap suitable for machining through holes.[Features]· The grooves on the cutting edge side of the biting part are cut obliquely to push the chips forward.· Causes less trouble due to chips.· The cutting torque is low.[Applications]· Can process both synchronously and asynchronously.· Suitable for drilling through holes.
From: 309,680 VND |
---|
Days to Ship: Số ngày giao hàng: 7 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Hand Taps for Parallel Pipe Threads_G
YAMAWA MFG
The parallel thread type is used for machining parallel threads used for ordinary mechanical connection when connecting pipes and piping parts.
From: 461,985 VND |
---|
Days to Ship: Số ngày giao hàng: 8 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Hand Taps for Parallel Pipe Threads, for LH Threads_PS-LH
YAMAWA MFG
■ The PS LH is a hand tap for left hand parrallelpipe threads and is used for products whosemain purpose is the tightness of threaded partsin connecting piping parts. The PS internalthread is used for fitting with PT external thread.
From: 806,943 VND |
---|
Days to Ship: Số ngày giao hàng: 9 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Spiral Fluted Taps for High Carbon Steels, Oxidized_HC+SP-OX
YAMAWA MFG
It is suitable for tapping high carbon steel such as S55C. Has undergone oxidation treatment.
From: 160,050 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Round Die For Whitworth Screws
TRUSCO NAKAYAMA
Dimensional adjustments can be made with the adjustment screw provided. · Can also be used to modify screw threads. · Iron and light metal. · For male threading.
From: 546,683 VND |
---|
Days to Ship: Số ngày giao hàng: Same day or more |
You can add up to 6 items per a category to the compare list.
TPT General Purpose (NPT) / SFT-TPT Spiral Tap
OSG KOREA CORP
From: 1,959,318 VND |
---|
Days to Ship: Số ngày giao hàng: 4 Day(s) |
You can add up to 6 items per a category to the compare list.
From: 193,781 VND |
---|
Days to Ship: Số ngày giao hàng: 4 Day(s) or more |
You can add up to 6 items per a category to the compare list.
OSG KOREA CORP
From: 234,072 VND |
---|
Days to Ship: Số ngày giao hàng: 4 Day(s) |
You can add up to 6 items per a category to the compare list.
OSG KOREA CORP
From: 585,563 VND |
---|
Days to Ship: Số ngày giao hàng: 4 Day(s) or more |
You can add up to 6 items per a category to the compare list.
OSG KOREA CORP
From: 926,376 VND |
---|
Days to Ship: Số ngày giao hàng: 4 Day(s) or more |
You can add up to 6 items per a category to the compare list.
From: 640,676 VND |
---|
Days to Ship: Số ngày giao hàng: 4 Day(s) |
You can add up to 6 items per a category to the compare list.
Tap For Tapered Pipe Thread (PT Screw)
TRUSCO NAKAYAMA
[Features]· Tap for tapered pipe thread. [Applications]· Work materials: cast iron, light metals.
From: 388,521 VND |
---|
Days to Ship: Số ngày giao hàng: Same day or more |
You can add up to 6 items per a category to the compare list.
NACHI(FUJIKOSHI)
Carbide tap with a TiCN coating treatment applied to the carbide base metal.[Features]· Excellent abrasion resistance and adhesion resistance.· Improved chip discharge performance and service life.[Applications]· Ideal for mass tapping of aluminum and cast iron, etc.
From: 2,906,728 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
G Spiral Flute Tap, GSP5M/GSP8M
NACHI(FUJIKOSHI)
From general steel to difficult-to-cut materials, this coated tap allows high-speed, high-efficiency threading of blind holes.[Features]· A tap that adopts powdered high-speed steel with excellent wear resistance and has a TiN coated surface.· It has a stable life using high-speed, high-precision threading.· Special relief prevents over-cutting due to excessive advancement of the tap.[Applications]· High-speed, high-efficiency threading of through holes on materials ranging from general steel to difficult-to-cut materials.
From: 696,891 VND |
---|
Days to Ship: Số ngày giao hàng: Same day or more |
You can add up to 6 items per a category to the compare list.
G Spiral Flute Tap, Stainless Steel, GSPS8M/-12M/-16M
NACHI(FUJIKOSHI)
Coating tap suitable for stainless steel and places prone to chip clogging.[Features]· Adopts powdered high-speed steel with excellent wear resistance.· Tap with TiN coating on the surface and stable service life due to high-speed and high-efficiency threading.· A thick neck, which eliminates chipping and wrapping of chips, has been adopted.[Applications]· Coating tap suitable for stainless steel and places prone to chip clogging.
From: 642,486 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
NACHI(FUJIKOSHI)
A roll type tap that does not expel chips.[Features]· The TAFLET series uses workpiece plastic fluidity to raise screw threads and create female threads.· It does not produce chips and provides stable screw accuracy.· The fiber flow of the material is not interrupted and therefore the strength of the female threads is strong.[Applications]· Ideal for rolled threading of non-ferrous metals such as aluminum.
From: 355,865 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Planet Cutter Series Small Diameter Planet Cutter WH-VM-PNC
OSG
Planet cutter that can be used to make small female threaded M1 to M5 holes by milling. Ideal for preventing defects in workpieces with high added value and for tapping without pilot holes
From: 2,083,136 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Straight Flutes Insert Screw Thread Tap_HL-HT
OSG
Used for tapping the female thread into which the helical coil is inserted. The pitch is the same as a normal tap with the same nominal size, but the outer diameter is made larger by the size of the insert.
From: 360,800 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
OSG
With a weak twist groove, cutting chips are cut into small pieces and discharged backwards, enabling stable tapping. It also has excellent chipping resistance.
From: 289,085 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Spiral Tap High-Speed Synchronizing Tap HS-SFT
OSG
Exclusively for machines with a full-lead feed mechanism, it is capable of high-speed, high-precision blind-hole tapping.
From: 748,333 VND |
---|
Days to Ship: Số ngày giao hàng: 20 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Spiral SYNCHRO Tap with Long Shank_HS-LT-SFT
OSG
Dedicated to machines with a complete lead feed mechanism, suitable for high-speed and high-precision set thread machining.
From: 998,260 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Straight Flutes Tap TiN coated_TIN-HT
OSG
It has excellent cutting edge strength and is suitable for high hardness materials that do not connect cutting chips.
From: 499,175 VND |
---|
Days to Ship: Số ngày giao hàng: Same day or more |
You can add up to 6 items per a category to the compare list.
Tungsten Carbide Straight Flutes Tap_OTT
OSG
Ideal for tapping large amounts of ordinary cast iron, high-rigidity cast iron, thermosetting resin, brass cast iron, etc., using a high-precision automatic machine.
From: 1,842,672 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Pointed Tap V coated with Long Shank_V-LT-POT
OSG
Can be widely applied from flexible materials to rigid materials. Especially, it shows excellent performance under high speed and high dilution (water-soluble cutting oil) tapping conditions. Also effective for dry tapping.
From: 711,530 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
LH Spiral SYNCHRO Tap with Long Shank_HS-LT-RFT
OSG
Dedicated to machines with a complete lead feed mechanism, suitable for high-speed, high-precision thread machining.
From: 843,803 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Taper Tap for Pipes TiN Coating, Short Screw TIN-S-TPT
OSG
A TiN coating with excellent chip-weld resistance and abrasion resistance is applied.
From: 963,200 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Taper Tap for Pipes General Use (Left-hand thread) TPT
OSG
Used to machine female tapered pipe threads. Long screw type mainly used for connecting pipe-shaped products
From: 1,773,333 VND |
---|
Days to Ship: Số ngày giao hàng: 21 Day(s) |
You can add up to 6 items per a category to the compare list.
Tungsten Carbide Taper Pipe Thread Tap with Long Shank_OT-LT-TPT
OSG
Suitable for tapping large amounts of ordinary cast iron, high-rigidity cast iron, thermosetting resin, brass cast iron, aluminum alloy casting, etc., using a high-precision automatic machine.
From: 5,820,250 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Taper Tap for Pipes Taper Tap Short Screws for Carbide Pipes OT-S-TPT
OSG
It is suitable for tapping a large amount of ordinary cast iron, high-strength cast iron, thermosetting resin, brass cast iron, aluminum alloy casting, etc. with a high-precision automatic machine.
From: 5,146,135 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Oversize Parallel Pipe Thread Tap_EX-SPT
OSG
Used to machine female threads of parallel pipe threads.
From: 783,333 VND |
---|
Days to Ship: Số ngày giao hàng: 20 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Parallel Tap for Pipes Spiral Tap, Long Shank LT-SFT-SPT
OSG
A point type is available for through holes and a spiral type is provided for blind holes according to the workpiece shape.
From: 1,501,363 VND |
---|
Days to Ship: Số ngày giao hàng: 20 Day(s) |
You can add up to 6 items per a category to the compare list.
CPM Fluteless (Nu-Roll) Tap V Coated_IT-NRT
OSG
With powder metal high-speed steel and special thread specifications, long-lifespan machining is possible with a wide range of work materials
From: 651,666 VND |
---|
Days to Ship: Số ngày giao hàng: Quote |
You can add up to 6 items per a category to the compare list.
Grooveless Tap Series V Coating, Long Shank for Deep Holes V-LT-DH-NRT
OSG
V (composite multi-layer coating) achieves high durability.Work material: General steel / stainless steel / aluminum / copperCoating: Surface treatment for steel
From: 966,785 VND |
---|
Days to Ship: Số ngày giao hàng: 20 Day(s) |
You can add up to 6 items per a category to the compare list.
MACHINING CENTER Tap (Normal Length)_EX-S-MCT
OSG
Stable performance can be obtained by suppressing the cutting chips from getting caught that tends to occur in the horizontal machining center.
From: 394,265 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
CPM Fluteless (Nu-Roll) Tap V coated Short Chamfer Type with long Shank_VP-LT-SC-NRT
OSG
With powder metal high-speed steel and special thread specifications, long-lifespan machining is possible with a wide range of work materials.
From: 830,655 VND |
---|
Days to Ship: Số ngày giao hàng: 20 Day(s) |
You can add up to 6 items per a category to the compare list.
Hexagonal Shaft Tap (for Through Hole)【1-3 Pieces Per Package】
ONISHI MANUFACTURING
From: 228,784 VND |
---|
Days to Ship: Số ngày giao hàng: 9 Day(s) |
You can add up to 6 items per a category to the compare list.
From: 597,018 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Pg Conduit Thread Tap (German Standard)
SKC
It can be easily used by anyone, reduces precious production time to the minimum and improves work efficiency
From: 2,264,998 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
BrandNhãn hiệu |
---|
Product SeriesDòng sản phẩm |
From |
Days to ShipSố ngày giao hàng |
Screw size (Nominal) |
Screw Types |
work material |
Pitch (P), Number of Threading(mm) |
Tool Material Type |
Tap Type |
Hole type |
Chamfer threads (Lcf) |
Coating Type |
Coating Y/N |
Overall Length (L)(mm) |
You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | |
BrandNhãn hiệu | OSG | ONISHI MANUFACTURING | TANOI MFG | SKC | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | TRUSCO NAKAYAMA | OSG KOREA CORP | OSG KOREA CORP | OSG KOREA CORP | OSG KOREA CORP | OSG KOREA CORP | YG 1 | TRUSCO NAKAYAMA | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | ONISHI MANUFACTURING | TANOI MFG | SKC |
Product SeriesDòng sản phẩm | Spiral Fluted Taps, Coated, Through Hole Use(with LH Spiral Flutes)_AU+SL | Spiral Fluted Taps for High Carbon Steels, Oxidized_HC+SP-OX | EX-POT for General Purpose / EX-H-POT Coating Treatment for General Purpose | Tungsten Carbide Taper Pipe Thread Tap with Long Shank_OT-LT-TPT | Taper Tap for Pipes Taper Tap Short Screws for Carbide Pipes OT-S-TPT | Grooveless Tap Series V Coating, Long Shank for Deep Holes V-LT-DH-NRT | CPM Fluteless (Nu-Roll) Tap V coated Short Chamfer Type with long Shank_VP-LT-SC-NRT | Hexagonal Shaft Tap (for Through Hole)【1-3 Pieces Per Package】 | |||||||||||||||||||||||||||||||||||||
From | 596,390 VND | 797,501 VND | 1,240,885 VND | 1,219,166 VND | 609,510 VND | 436,914 VND | 452,258 VND | 309,680 VND | 461,985 VND | 806,943 VND | 160,050 VND | 546,683 VND | 1,959,318 VND | 193,781 VND | 234,072 VND | 585,563 VND | 926,376 VND | 640,676 VND | 388,521 VND | 2,906,728 VND | 696,891 VND | 642,486 VND | 355,865 VND | 2,083,136 VND | 360,800 VND | 289,085 VND | 748,333 VND | 998,260 VND | 499,175 VND | 1,842,672 VND | 711,530 VND | 843,803 VND | 963,200 VND | 1,773,333 VND | 5,820,250 VND | 5,146,135 VND | 783,333 VND | 1,501,363 VND | 651,666 VND | 966,785 VND | 394,265 VND | 830,655 VND | 228,784 VND | 597,018 VND | 2,264,998 VND |
Days to ShipSố ngày giao hàng | 20 Day(s) | 9 Day(s) | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 7 Day(s) or more | 8 Day(s) or more | 9 Day(s) or more | 6 Day(s) or more | Same day or more | 4 Day(s) | 4 Day(s) or more | 4 Day(s) | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) | Same day or more | 6 Day(s) or more | Same day or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 20 Day(s) or more | 6 Day(s) or more | Same day or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 21 Day(s) | 6 Day(s) or more | 6 Day(s) or more | 20 Day(s) or more | 20 Day(s) | Quote | 20 Day(s) | 6 Day(s) or more | 20 Day(s) | 9 Day(s) | 6 Day(s) or more | 6 Day(s) or more |
Screw size (Nominal) | G1/4 ~ G3/8 | M3 ~ M6 | M4 ~ M6 | NPT3/8 | 1'-11.5 ~ 3/8-18 | M3 ~ M12 | M3 ~ M12 | 1/2-20UNF ~ M30 | 1'1/4-11 ~ 3/8-19 | 1/2-14 ~ 1/8-28 | M3 ~ M16 | W1 ~ W7/8 | NPT1/2 | M1.4 ~ M24 | M 3 ~ M14 | PT 1 ~ PT 3/4 | PF1 ~ PF3/8 | 3/8 | 1 ~ 3/8 | M3 ~ M12 | M8 ~ M10 | M8 ~ M16 | M1.4 ~ M10 | - | No.10UN ~ M12 | M6 | M5 ~ M10 | M3 ~ M10 | M2 ~ M12 | M1.4 ~ M20 | M4 ~ M6 | M3 ~ M30 | R1 ~ R3/8 | R1/4 | R1/2 ~ R3/8 | R1/2 ~ R3/8 | PF1 ~ PF3/8 | PF1/4 | No.2UN ~ M3 | M4 ~ M5 | M8 ~ M22 | M3 | M3 ~ M4 | M1 ~ M10 | PG7 ~ PG42 |
Screw Types | Parallel for Pipes | Meter | Meter | - | Taper for Pipe | Meter | Meter | Meter / unified / Whitworth | Parallel for Pipes | Parallel for Pipes | Meter | Whitworth | Taper for Pipe | Meter | Meter | Taper for Pipe | Parallel for Pipes | unified | Taper for Pipe | Meter | Meter | Meter | Meter | Meter / unified | Meter / unified | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Taper for Pipe | Taper for Pipe | Taper for Pipe | Taper for Pipe | Parallel for Pipes | Parallel for Pipes | Meter / unified | Meter | Meter | Meter | Meter | Meter | Other |
work material | Aluminum Alloy Casting (AC, ADC)[○] | Aluminum Alloy Casting (AC, ADC)[○] | Aluminum Alloy Casting (AC, ADC)[◎] | Aluminum Alloy Casting (AC, ADC)[○] | Aluminum Alloy Casting (AC, ADC)[○] | Aluminum Alloy Casting (AC, ADC)[○] | Aluminum Alloy Casting (AC, ADC)[○] | Aluminum Alloy Casting (AC, ADC)[○] | Aluminum Alloy Casting (AC, ADC)[○] | Aluminum Alloy Casting (AC, ADC)[○] | Aluminum Alloy Casting (AC, ADC)[○] | Aluminum Alloy Casting (AC, ADC)[○] | Aluminum Alloy Casting (AC, ADC)[○] | Aluminum Alloy Casting (AC, ADC)[○] | Aluminum Alloy Casting (AC, ADC)[○] | Aluminum Alloy Casting (AC, ADC)[○] | Aluminum Alloy Casting (AC, ADC)[○] | Aluminum Alloy Casting (AC, ADC)[◎] | Aluminum Alloy Casting (AC, ADC)[○] | Aluminum Alloy Casting (AC, ADC)[◎] | Aluminum Alloy Casting (AC, ADC)[○] | Aluminum Alloy Casting (AC, ADC)[○] | Aluminum Alloy Casting (AC, ADC)[◎] | Aluminum Alloy Casting (AC, ADC)[○/◎] | Aluminum Alloy Casting (AC, ADC)[○] | Aluminum Alloy Casting (AC, ADC)[○] | Aluminum Alloy Casting (AC, ADC)[○] | Aluminum Alloy Casting (AC, ADC)[○] | Aluminum Alloy Casting (AC, ADC)[○] | Aluminum Alloy Casting (AC, ADC)[○] | Aluminum Alloy Casting (AC, ADC)[○] | Aluminum Alloy Casting (AC, ADC)[◎] | Aluminum Alloy Casting (AC, ADC)[○] | Aluminum Alloy Casting (AC, ADC)[○] | Aluminum Alloy Casting (AC, ADC)[◎] | Aluminum Alloy Casting (AC, ADC)[◎] | Aluminum Alloy Casting (AC, ADC)[○] | Aluminum Alloy Casting (AC, ADC)[○] | Aluminum Alloy Casting (AC, ADC)[◎] | Aluminum Alloy Casting (AC, ADC)[◎] | Aluminum Alloy Casting (AC, ADC)[○] | Aluminum Alloy Casting (AC, ADC)[◎] | Aluminum Alloy Casting (AC, ADC)[○] | Aluminum Alloy Casting (AC, ADC)[○] | Aluminum Alloy Casting (AC, ADC)[○] |
Pitch (P), Number of Threading(mm) | 19 ~ 28 | 0.5 ~ 1 | 0.7 ~ 1 | 18 | - | 0.5 ~ 1.75 | 0.5 ~ 1.75 | 0.5 ~ 3 | - | - | 0.5 ~ 2 | 12 ~ 40 | 14 | 0.3 ~ 3 | 0.5 ~ 2 | 11 ~ 28 | 1 ~ 28 | 16UNC | - | 0.5 ~ 1.75 | 1.25 ~ 1.5 | 1.25 ~ 2 | 0.3 ~ 1.5 | 0.25 ~ 32 | 1.75 ~ 32 | 1 | 0.8 ~ 1.5 | 0.5 ~ 1.5 | 0.4 ~ 1.75 | 0.3 ~ 2.5 | 0.7 ~ 1 | 0.5 ~ 3.5 | 11 ~ 28 | 19 | 14 ~ 28 | 14 ~ 28 | 11 ~ 19 | 19 | 0.25 ~ 56 | 0.7 ~ 0.8 | 1.25 ~ 2.5 | 0.5 | 0.5 ~ 0.7 | 0.2 ~ 1.5 | 16 ~ 20 |
Tool Material Type | High-speed steel | High-speed steel | High-speed steel | - | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | Alloy HSS | High-speed steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | High-speed steel | High-speed steel | Powder high-speed steel | SKS | Carbide | Alloy HSS | Alloy HSS | High-speed steel | Carbide | High-speed steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Carbide | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | High-speed steel | Carbide | Carbide | Vanadium High-Speed Steel | High-speed steel | Powder high-speed steel | High-speed steel | Vanadium High-Speed Steel | Powder high-speed steel | High-speed steel | High-speed steel | High-speed steel |
Tap Type | Tap for pipes | Thread-cutting-related tool | Roll tap | Die | Tap for pipes | Point tap | Spiral Tap | Point tap | Tap for pipes | Tap for pipes | Spiral Tap | Die | Tap for pipes | Point tap | Point tap | Tap for pipes | Tap for pipes | Spiral Tap | Tap for pipes | Hand Tap | Spiral Tap | Spiral Tap | Roll tap | Thread cutter | Hand Tap | Spiral Tap | Spiral Tap | Spiral Tap | Hand Tap | Hand Tap | Point tap | Point tap | Tap for pipes | Tap for pipes | Tap for pipes | Tap for pipes | Tap for pipes | Tap for pipes | Roll tap | Roll tap | Thread-cutting-related tool | Roll tap | Thread-cutting-related tool | Roll tap | Tap for pipes |
Hole type | - | For through hole | - | - | For through hole / For blind hole | For through hole | For through hole | For through hole | For through hole / For blind hole | - | For blind hole | - | For blind hole | For through hole | For through hole | For blind hole | - | For blind hole | For through hole | For through hole / For blind hole | For blind hole | For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For blind hole | For blind hole | For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole | For through hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For blind hole | For blind hole | For blind hole | For through hole / For blind hole | For blind hole | For through hole | - | - |
Chamfer threads (Lcf) | 2.5P | - | 1P ~ 2P | - | 3P | 5P | 5P | 5P | 3.5P | 3.5P | 2.5P | - | 2.5P | 5 | 5P | 2.5P | 2.5P | 2.5 | 1.5P | 1.5P ~ 3P | 2.5P | 2.5P | 2P ~ 4P | - | 1.5P ~ 5P | 2.5P | 3P | 3P | 1.5P ~ 5P | 1.5P ~ 3P | 5P | 6P | 2.5P | 2.5P | 2.5P | 2.5P | 4P | 2.5P | 2P | 2P | 3P | 1P | - | 1P ~ 4P | - |
Coating Type | Non-Coated | Non-Coated | TiCN | - | - | TiN | TiN | - | - | - | - | - | - | Homo | TiN | - | - | Homo | - | TiCN | TiN | TiN | - | For High Hardness (Silicon Group) / Other | Non-Coated | Non-Coated | TiN | TiN | TiN | Non-Coated | TiCN | TiN | TiN | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | TiCN | TiCN | Non-Coated | TiCN | Non-Coated | TiCN | - |
Coating Y/N | NA | NA | Available | - | NA | Available | Available | NA | NA | NA | NA | - | NA | NA | Available | NA | NA | Available | NA | Available | Available | Available | NA | Available | NA | NA | Available | Available | Available | NA | Available | Available | Available | NA | NA | NA | NA | NA | Available | Available | NA | Available | NA | Available | - |
Overall Length (L)(mm) | 55 ~ 65 | 66 ~ 69 | 70 ~ 120 | - | 54 ~ 120 | 46 ~ 82 | 46 ~ 82 | 46 ~ 135 | 59 ~ 140 | 55 ~ 80 | 46 ~ 95 | - | 80 | 34 ~ 120 | 46 ~ 88 | 62 ~ 95 | 55 ~ 95 | 75.5 | 55 ~ 120 | 46 ~ 82 | 70 ~ 75 | 70 ~ 95 | 34 ~ 75 | 40 | 60 ~ 90 | 62 | 60 ~ 75 | 100 ~ 150 | 40 ~ 82 | 34 ~ 105 | 100 | 100 ~ 200 | 55 ~ 95 | 62 | 100 ~ 150 | 55 ~ 80 | 62 ~ 95 | 150 | 30 ~ 46 | 120 | 70 ~ 115 | 80 | 70 ~ 70/70/70 | 30 ~ 75 | 85 ~ 135 |
Loading...Tải…
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy