(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.
Brand |
|
---|---|
CAD |
|
Days to Ship |
|
184 itemsMặt hàng
You can add up to 6 items per a category to the compare list.
Hand Taps for American Parallel Pipe Threads_NPS
YAMAWA MFG
■ The NPS tap is a hand tap for American parallelpipe threads and is used for products whosemain purpose is the tightness of the threadedpart in connecting pipe parts and the like.
From: 888,573 VND |
---|
Days to Ship: Số ngày giao hàng: Same day or more |
You can add up to 6 items per a category to the compare list.
Hand Taps for Left Hand Threads_HT-LH
YAMAWA MFG
It is suitable for threading for simple installation used for thin steel plates such as SPC and SPH and mild steel of SS400, S20 or less.
From: 180,180 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
YAMAWA MFG
It is suitable for threading for simple installation used for thin steel plates such as SPC and SPH and mild steel of SS400, S20 or less.
From: 455,100 VND |
---|
Days to Ship: Số ngày giao hàng: 9 Day(s) or more |
You can add up to 6 items per a category to the compare list.
From: 172,676 VND |
---|
Days to Ship: Số ngày giao hàng: 4 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Spiral Tap for General Application (with OX)_EX-H-SFT
OSG
Used for drilling blind holes. For carbon steel, steel alloy, and nonferrous metal, this is suitable for cutting materials where the metal waste forms a continuous coil.
From: 211,666 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Pointed Tap Series TiN Coating TIN-POT
OSG
Features a wide range of uses, but especially suitable for high-speed tapping of stainless steel, tempered material, etc.
From: 473,307 VND |
---|
Days to Ship: Số ngày giao hàng: Same day or more |
You can add up to 6 items per a category to the compare list.
Pointed Tap Series V Coating V-POT
OSG
Can be used with a wide range of soft and hard materials. Exhibits superb performance when used for high-speed / high-dilution (water-soluble cutting fluid) tapping conditions. Also effective for dry tapping
From: 546,666 VND |
---|
Days to Ship: Số ngày giao hàng: 14 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Tapered Tap for American Piping General Use (NPTF) TPT
OSG
Used to machine female tapered pipe threads. Mainly used for connecting pipe-shaped objects
From: 1,031,725 VND |
---|
Days to Ship: Số ngày giao hàng: 20 Day(s) |
You can add up to 6 items per a category to the compare list.
Hand Tap Set (for Metric Screws/HSS-E)
TRUSCO NAKAYAMA
[Features]· Can be used for both through holes and blind holes.· It is a high-speed steel (HSS-E) tap set.[Applications]· Work materials: General steel, low/medium carbon steel, alloy steel.
From: 591,988 VND |
---|
Days to Ship: Số ngày giao hàng: Same day |
You can add up to 6 items per a category to the compare list.
Grooveless Tap Series, X Performer Long Shank LT-S-XPF
OSG
Compared to cutting taps, carbon steel and steel alloys have less cutting chipping troubles and can be machined for a longer lifespan. It is especially effective for processing steel forged parts related to automobiles.[Specifications]・ Shape: Forming tap・ Screw type: Metric・ Work Material: Low carbon steel (C content less than 0.25%): most suitable / medium carbon steel (C content 0.25 to 0.45%): most suitable / high carbon steel (C content over 0.45%): most suitable / steel alloy (SCM): most suitable / stainless steel (SUS): most suitable / heat-treated steel (25 to 35 HRC): most suitable / cast steel (SC): suitable / copper (Cu): most suitable / brass (Bs): most suitable / brass cast iron (BsC): most suitable / rolled aluminum (AL): most suitable / aluminum alloy castings (AC, ADC): most suitable / zinc alloy casting (ZDC) [◎]
From: 704,256 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
OSG KOREA CORP
From: 926,376 VND |
---|
Days to Ship: Số ngày giao hàng: 8 Day(s) or more |
You can add up to 6 items per a category to the compare list.
TS Coated Carbide Threading Cutter, for Internal Metric Threads
MISUMI
[Features]··Carbide thread mill cutter capable of high-speed stable machining·Can be used for both blind holes and through holes··It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
From: 5,701,428 VND |
---|
Days to Ship: Số ngày giao hàng: 4 Day(s) or more |
You can add up to 6 items per a category to the compare list.
MISUMI
[Features]·Carbide uncoated spiral flute tap·Can be used for blind hole machining·Suitable for mass production tapping of aluminum alloys and copper alloys
From: 781,751 VND |
---|
Days to Ship: Số ngày giao hàng: 4 Day(s) or more |
You can add up to 6 items per a category to the compare list.
High-Speed Steel Point Tap【10 Pieces Per Package】
MISUMI
[Features]·High-speed steel uncoated spiral point tap·Can be used for through hole machining·Effective for work materials with continuous cutting chip such as carbon steel and steel alloy
From: 1,209,973 VND |
---|
Days to Ship: Số ngày giao hàng: Same day or more |
You can add up to 6 items per a category to the compare list.
MISUMI
[Features]·Carbide uncoated type hand tap·Can be used for both blind holes and through holes·Suitable for mass production tapping of various cast iron
From: 781,751 VND |
---|
Days to Ship: Số ngày giao hàng: 4 Day(s) or more |
You can add up to 6 items per a category to the compare list.
From: 1,418,585 VND |
---|
Days to Ship: Số ngày giao hàng: 20 Day(s) |
You can add up to 6 items per a category to the compare list.
Spiral Tap TiN Coating TIN-SFT
OSG
Machined with a tapped thread length of 2D or less, it is well suited for tapping low and medium carbon steel and stainless steel using a water-soluble cutting agent.
From: 488,333 VND |
---|
Days to Ship: Số ngày giao hàng: Same day or more |
You can add up to 6 items per a category to the compare list.
Spiral Tap for High-Carbon Steel EX-HC-SFT
OSG
Suitable for machining blind holes in medium carbon steel and higher carbon materials, die steel, steel alloy, etc.
From: 237,637 VND |
---|
Days to Ship: Số ngày giao hàng: 20 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Hand Tap for General Use Long Shank EX-LT
OSG
Long shank type.Tool Material: Vanadium high-speed steelWork material: general steel / cast iron / aluminum / copper
From: 344,999 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Planet Cutter Series NC Planet Cutter WX-PNC
OSG
If the pitch is the same, it can process threads with different nominals. Additionally, both right-handed and left-handed screws can be machined.
From: 5,378,313 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Parallel Pipe Thread Tap Long Shank General Application_LT-SPT
OSG
It is used to machine the parallel female threads of the tapered pipe threads and the parallel pipe threads.
From: 1,204,999 VND |
---|
Days to Ship: Số ngày giao hàng: Quote |
You can add up to 6 items per a category to the compare list.
Parallel Tap for Pipes General Use Long Shank LT-SPT
OSG
It is used to machine the parallel female threads of the tapered pipe threads and the parallel pipe threads.
From: 1,204,999 VND |
---|
Days to Ship: Số ngày giao hàng: Quote |
You can add up to 6 items per a category to the compare list.
Parallel Tap for Pipes Spiral Tap SFT-SPT
OSG
A spiral hole is available for the blind hole according to the workpiece shape.
From: 596,390 VND |
---|
Days to Ship: Số ngày giao hàng: 20 Day(s) |
You can add up to 6 items per a category to the compare list.
ONISHI MANUFACTURING
[Features]· Impact drill compatible hexagonal shaft drilling tool for simultaneous pilot hole drilling and thread cutting work.[Applications]· For formation and modification of through-hole threads.· Work materials: Iron, aluminum, brass.[Features]· 1 unit enables pilot hole machining and thread cutting at the same time.· 6.35 mm hex shaft finish that supports impact drivers.· Drill cutting edge with good bite due to X-type thinning and outstanding sharpness
From: 797,501 VND |
---|
Days to Ship: Số ngày giao hàng: 9 Day(s) |
You can add up to 6 items per a category to the compare list.
Screw Thread Die For Gas Pipes, Taper NPT
SKC
[Features]Screw thread (die) used for machining male threads for American pipes in gas pipes.
From: 1,219,166 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Hand Taps for American Taper Pipe Threads_NPT
YAMAWA MFG
Tap for machining American taper pipe "NPT" female threads.[Features]· The groove is a straight hand tap type. Comes with three biting teeth at the tip.· General-purpose tap for general steel materials.[Applications]· To be used when machining American tapered pipe thread for pipes "NPT" female thread.* American standard pipe threads, available in many types, can be complicated.* Check carefully when purchasing taps, as there are various kinds available such as "NPT", "NPTF", "NPS", and "NPSF".
From: 609,510 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Spiral Pointed Taps for Left Hand Threads_PO-V
YAMAWA MFG
Coated point tap suitable for low carbon steel to high carbon steel machining.[Features]· Since it has a coating, stable processing is possible at medium cutting speeds, and the tool life is improved.[Applications]· Can process both synchronously and asynchronously.· Recommended for machining speeds of 10 to 20 m/min (completely synchronous feeding recommended for speeds of 15 m/min or higher).
From: 436,914 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Spiral Fluted Taps, Coated, Through Hole Use(with LH Spiral Flutes)_AU+SL
YAMAWA MFG
A coated spiral tap for through holes that provides sufficient performance for synchronous/asynchronous machining and enables stable threading in the mid-speed range (10 to 25 m/min).
From: 452,258 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Spiral Fluted Taps for Titanium Alloys_ZET-B
YAMAWA MFG
A tap for processing high strength, lightweight, and heat-resistant titanium alloys, where the main component is titanium.
From: 407,291 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Spiral Pointed Taps for Left Hand Threads_PO-LH
YAMAWA MFG
Point tap suitable for machining through holes.[Features]· The grooves on the cutting edge side of the biting part are cut obliquely to push the chips forward.· Causes less trouble due to chips.· The cutting torque is low.[Applications]· Can process both synchronously and asynchronously.· Suitable for drilling through holes.
From: 309,680 VND |
---|
Days to Ship: Số ngày giao hàng: 7 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Hand Taps for Parallel Pipe Threads_G
YAMAWA MFG
The parallel thread type is used for machining parallel threads used for ordinary mechanical connection when connecting pipes and piping parts.
From: 461,985 VND |
---|
Days to Ship: Số ngày giao hàng: 8 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Hand Taps for Parallel Pipe Threads, for LH Threads_PS-LH
YAMAWA MFG
■ The PS LH is a hand tap for left hand parrallelpipe threads and is used for products whosemain purpose is the tightness of threaded partsin connecting piping parts. The PS internalthread is used for fitting with PT external thread.
From: 806,943 VND |
---|
Days to Ship: Số ngày giao hàng: 9 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Spiral Fluted Taps for High Carbon Steels, Oxidized_HC+SP-OX
YAMAWA MFG
It is suitable for tapping high carbon steel such as S55C. Has undergone oxidation treatment.
From: 160,050 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Short Spiral Fluted Taps, Deep Hole Use_S-SP
YAMAWA MFG
Spiral tap with short thread length effective for deep screw tapping of 2.5 times nominal diameter or more.[Features]· Low frictional resistance and good supply of cutting oil are effective for deep thread machining to 2.5 times the nominal diameter or more.· Oxide treatment (OX treatment) applied to prevent welding.[Applications]· Optimal for deep thread machining to 2.5 times the nominal diameter or more.
From: 227,014 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
TPT General Purpose (NPT) / SFT-TPT Spiral Tap
OSG KOREA CORP
From: 1,293,622 VND |
---|
Days to Ship: Số ngày giao hàng: 4 Day(s) or more |
You can add up to 6 items per a category to the compare list.
From: 174,594 VND |
---|
Days to Ship: Số ngày giao hàng: 4 Day(s) or more |
You can add up to 6 items per a category to the compare list.
OSG KOREA CORP
From: 234,072 VND |
---|
Days to Ship: Số ngày giao hàng: 4 Day(s) |
You can add up to 6 items per a category to the compare list.
OSG KOREA CORP
From: 585,563 VND |
---|
Days to Ship: Số ngày giao hàng: 4 Day(s) or more |
You can add up to 6 items per a category to the compare list.
OSG KOREA CORP
From: 926,376 VND |
---|
Days to Ship: Số ngày giao hàng: 4 Day(s) or more |
You can add up to 6 items per a category to the compare list.
From: 640,676 VND |
---|
Days to Ship: Số ngày giao hàng: 4 Day(s) |
You can add up to 6 items per a category to the compare list.
TiAlN Coated Carbide Threading Cutter, for High-Hardness Steel / for Internal Metric Threads
MISUMI
The left-flute left-rotary cutting that's achieved by the original geometry and coating allow the milling threading of high hardness steel of up to HRC62.
From: 7,894,879 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
TiAlN Coated Carbide Threading Cutter for Inner Diameter Metric Threads (manufactured by Carmex)
MISUMI
[Features]·Small diameter thread cutting from M1.4 × 0.3 (Pilot hole diameter ø1.1 mm) is possible·Reduced cutting load due to short flute length (3 ridges)·Enables effective thread cutting to corners of blind holes
From: 6,588,067 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Stainless Steel Machining Tap, Point Tap / Spiral Tap
MISUMI
in order to allow the small diameter tapping of stainless steel that's most prone to breakage, it is given the special surface treatment.
From: 1,806,128 VND |
---|
Days to Ship: Số ngày giao hàng: Same day |
You can add up to 6 items per a category to the compare list.
Planet Cutter Series Small Diameter Planet Cutter WH-VM-PNC
OSG
Planet cutter that can be used to make small female threaded M1 to M5 holes by milling. Ideal for preventing defects in workpieces with high added value and for tapping without pilot holes
From: 2,083,136 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Spiral Tap High-Speed Synchronizing Tap HS-SFT
OSG
Exclusively for machines with a full-lead feed mechanism, it is capable of high-speed, high-precision blind-hole tapping.
From: 748,333 VND |
---|
Days to Ship: Số ngày giao hàng: 20 Day(s) or more |
BrandNhãn hiệu |
---|
Product SeriesDòng sản phẩm |
From |
Days to ShipSố ngày giao hàng |
Screw size (Nominal) |
Screw Types |
work material |
Pitch (P), Number of Threading(mm) |
Tool Material Type |
Tap Type |
Hole type |
Chamfer threads (Lcf) |
Coating Type |
Coating Y/N |
Overall Length (L)(mm) |
You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | |
BrandNhãn hiệu | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | OSG KOREA CORP | OSG | OSG | OSG | OSG | TRUSCO NAKAYAMA | OSG | OSG KOREA CORP | MISUMI | MISUMI | MISUMI | MISUMI | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | ONISHI MANUFACTURING | SKC | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | OSG KOREA CORP | OSG KOREA CORP | OSG KOREA CORP | OSG KOREA CORP | OSG KOREA CORP | YG 1 | MISUMI | MISUMI | MISUMI | OSG | OSG |
Product SeriesDòng sản phẩm | EX-SFT for General Purpose/ EX-H-SFT Coating Treatment for General Purpose / TIN-SFT Tin Coated | TS Coated Carbide Threading Cutter, for Internal Metric Threads | Parallel Pipe Thread Tap Long Shank General Application_LT-SPT | Spiral Fluted Taps, Coated, Through Hole Use(with LH Spiral Flutes)_AU+SL | Spiral Fluted Taps for High Carbon Steels, Oxidized_HC+SP-OX | EX-POT for General Purpose / EX-H-POT Coating Treatment for General Purpose | TiAlN Coated Carbide Threading Cutter, for High-Hardness Steel / for Internal Metric Threads | TiAlN Coated Carbide Threading Cutter for Inner Diameter Metric Threads (manufactured by Carmex) | |||||||||||||||||||||||||||||||||||||
From | 888,573 VND | 180,180 VND | 455,100 VND | 172,676 VND | 211,666 VND | 473,307 VND | 546,666 VND | 1,031,725 VND | 591,988 VND | 704,256 VND | 926,376 VND | 5,701,428 VND | 781,751 VND | 1,209,973 VND | 781,751 VND | 1,418,585 VND | 488,333 VND | 237,637 VND | 344,999 VND | 5,378,313 VND | 1,204,999 VND | 1,204,999 VND | 596,390 VND | 797,501 VND | 1,219,166 VND | 609,510 VND | 436,914 VND | 452,258 VND | 407,291 VND | 309,680 VND | 461,985 VND | 806,943 VND | 160,050 VND | 227,014 VND | 1,293,622 VND | 174,594 VND | 234,072 VND | 585,563 VND | 926,376 VND | 640,676 VND | 7,894,879 VND | 6,588,067 VND | 1,806,128 VND | 2,083,136 VND | 748,333 VND |
Days to ShipSố ngày giao hàng | Same day or more | 6 Day(s) or more | 9 Day(s) or more | 4 Day(s) or more | 6 Day(s) or more | Same day or more | 14 Day(s) or more | 20 Day(s) | Same day | 6 Day(s) or more | 8 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | Same day or more | 4 Day(s) or more | 20 Day(s) | Same day or more | 20 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | Quote | Quote | 20 Day(s) | 9 Day(s) | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 7 Day(s) or more | 8 Day(s) or more | 9 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) | 6 Day(s) or more | 6 Day(s) or more | Same day | 6 Day(s) or more | 20 Day(s) or more |
Screw size (Nominal) | 1/2-14 ~ 1/8-27 | M1.4 ~ M30 | 1 ~ M48 | M2 ~ M36 | M2 ~ M33 | M1.4 ~ M42 | M3 ~ M12 | NPT1/4 ~ NPT1/8 | M3 ~ M16 | M3 ~ M12 | PS1-1/2 ~ PS3/8 | M3 ~ M12 | M3 ~ M10 | M2 ~ M12 | M3 ~ M10 | M6 ~ M12 | M1.4 ~ M24 | M3 ~ M16 | M3 ~ M18 | - | Rp1 ~ Rp3/8 | G1 ~ G3/8 | G1/4 ~ G3/8 | M3 ~ M6 | NPT3/8 | 1'-11.5 ~ 3/8-18 | M3 ~ M12 | M3 ~ M6 | M3 ~ M20 | 1/2-20UNF ~ M30 | 1'1/4-11 ~ 3/8-19 | 1/2-14 ~ 1/8-28 | M3 ~ M16 | M2 ~ M45 | NPT1/2 ~ NPT1/16 | M1.7 ~ M24 | M 3 ~ M14 | PT 1 ~ PT 3/4 | PF1 ~ PF3/8 | 3/8 | M2 ~ M12 | M1.4 ~ M20 | M4 ~ M5 | - | M5 ~ M10 |
Screw Types | Parallel for Pipes | Meter | Meter / unified | Meter | Meter | Meter | Meter | Taper for Pipe | Meter | Meter | Parallel for Pipes | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter / unified | Meter / unified / Taper for Pipe | Parallel for Pipes | Parallel for Pipes | Parallel for Pipes | Meter | - | Taper for Pipe | Meter | Meter | Meter | Meter / unified / Whitworth | Parallel for Pipes | Parallel for Pipes | Meter | Meter | Taper for Pipe | Meter | Meter | Taper for Pipe | Parallel for Pipes | unified | Meter | Meter | Meter | Meter / unified | Meter |
work material | Steel casting (SC)[○] | Steel casting (SC)[○] | Steel casting (SC)[○] | Steel casting (SC)[○] | Steel casting (SC)[○] | Steel casting (SC)[○] | Steel casting (SC)[◎] | Steel casting (SC)[○] | Steel casting (SC)[○] | Steel casting (SC)[○] | Steel casting (SC)[◎] | Steel casting (SC)[○] | Steel casting (SC)[○] | Steel casting (SC)[○] | Steel casting (SC)[○] | Steel casting (SC)[○] | Steel casting (SC)[○] | Steel casting (SC)[○] | Steel casting (SC)[○] | Steel casting (SC)[○] | Steel casting (SC)[○] | Steel casting (SC)[○] | Steel casting (SC)[◎] | Steel casting (SC)[○] | Steel casting (SC)[○] | Steel casting (SC)[○] | Steel casting (SC)[○] | Steel casting (SC)[○] | Steel casting (SC)[○] | Steel casting (SC)[○] | Steel casting (SC)[○] | Steel casting (SC)[○] | Steel casting (SC)[○] | Steel casting (SC)[○] | Steel casting (SC)[○] | Steel casting (SC)[○] | Steel casting (SC)[○] | Steel casting (SC)[○] | Steel casting (SC)[◎] | Steel casting (SC)[◎] | Steel casting (SC)[○] | Steel casting (SC)[○] | Steel casting (SC)[○] | Steel casting (SC)[○] | Steel casting (SC)[○] |
Pitch (P), Number of Threading(mm) | - | 0.3 ~ 3.5 | 0.5 ~ 24 | 0.4 ~ 4 | 0.4 ~ 3 | 0.3 ~ 4.5 | 0.5 ~ 1.75 | 18 ~ 27 | 0.5 ~ 2 | 0.5 ~ 1.75 | 11 ~ 28 | 0.5 ~ 1.75 | 0.5 ~ 1.5 | 0.4 ~ 1.75 | 0.5 ~ 1.5 | 1 ~ 1.75 | 0.3 ~ 3 | 0.5 ~ 2 | 0.5 ~ 16 | 1 ~ 28 | 11 ~ 28 | 11 ~ 28 | 19 ~ 28 | 0.5 ~ 1 | 18 | - | 0.5 ~ 1.75 | 0.5 ~ 1 | 0.5 ~ 2.5 | 0.5 ~ 3 | - | - | 0.5 ~ 2 | 0.4 ~ 4.5 | 14 ~ 27 | 0.35 ~ 2.5 | 0.5 ~ 2 | 11 ~ 28 | 1 ~ 28 | 16UNC | 0.4 ~ 1.75 | 0.3 ~ 2.5 | 0.7 ~ 0.8 | 0.25 ~ 32 | 0.8 ~ 1.5 |
Tool Material Type | High-speed steel | High-speed steel | High-speed steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | High-speed steel | High-speed steel | Vanadium High-Speed Steel | High-speed steel | Carbide | Carbide | Vanadium High-Speed Steel | Carbide | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Carbide | High-speed steel | High-speed steel | High-speed steel | High-speed steel | - | High-speed steel | High-speed steel | High-speed steel | Powder high-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | High-speed steel | High-speed steel | Powder high-speed steel | Carbide | Carbide | Vanadium High-Speed Steel | Carbide | Vanadium High-Speed Steel |
Tap Type | Tap for pipes | Hand Tap | Hand Tap | Spiral Tap | Spiral Tap | Point tap | Point tap | Tap for pipes | Hand Tap | Roll tap | Tap for pipes | Thread cutter | Spiral Tap | Point tap | Hand Tap | Spiral Tap | Spiral Tap | Spiral Tap | Hand Tap | Thread cutter | Tap for pipes | Tap for pipes | Tap for pipes | Thread-cutting-related tool | Die | Tap for pipes | Point tap | Spiral Tap | Spiral Tap | Point tap | Tap for pipes | Tap for pipes | Spiral Tap | Spiral Tap | Tap for pipes | Point tap | Point tap | Tap for pipes | Tap for pipes | Spiral Tap | Thread cutter | Thread cutter | Spiral Tap | Thread cutter | Spiral Tap |
Hole type | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For blind hole | For through hole | For through hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | - | For through hole / For blind hole | For blind hole | For through hole | For through hole / For blind hole | - | For blind hole | For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | - | For through hole | - | For through hole / For blind hole | For through hole | For through hole | For blind hole | For through hole | For through hole / For blind hole | - | For blind hole | For blind hole | For blind hole | For through hole | For through hole | For blind hole | - | For blind hole | For through hole / For blind hole | For through hole / For blind hole | For blind hole | For through hole / For blind hole | For blind hole |
Chamfer threads (Lcf) | 5P | 1.5P ~ 5P | 1.5P ~ 5P | 2.5 | 2.5P | 5P | 5P | 2.5P | - | - | 2.5P | - | 1.5P ~ 2.5P | 5P | 1.5P ~ 3P | 2.5P | 2.5P | 3P | 1.5P ~ 5P | - | 4P | 4P | 2.5P | - | - | 3P | 5P | 5P | 3P | 5P | 3.5P | 3.5P | 2.5P | 2.5P | 2.5P | 5 | 5P | 2.5P | 2.5P | 2.5 | - | - | - | - | 3P |
Coating Type | - | - | - | TiN / Homo | Non-Coated | TiN | TiCN | Non-Coated | Non-Coated | Other | - | For High Hardness (Silicon Group) | - | - | - | TiCN | TiN | Non-Coated | Non-Coated | TiAlN | Non-Coated | Non-Coated | Non-Coated | Non-Coated | - | - | TiN | TiN | - | - | - | - | - | - | - | Homo | TiN | - | - | Homo | TiAlN | TiAlN | - | For High Hardness (Silicon Group) / Other | TiN |
Coating Y/N | NA | NA | NA | Available | NA | Available | Available | NA | NA | Available | NA | Available | NA | NA | NA | NA | Available | NA | NA | Available | NA | NA | NA | NA | - | NA | Available | Available | NA | NA | NA | NA | NA | NA | NA | Available | Available | NA | NA | Available | Available | Available | NA | Available | Available |
Overall Length (L)(mm) | 55 ~ 80 | 36 ~ 135 | 70 ~ 300 | 40 ~ 155 | 40 ~ 120 | 34 ~ 175 | 46 ~ 82 | 55 ~ 62 | 46 ~ 95 | 80 ~ 150 | 55 ~ 110 | 48 ~ 74 | 46 ~ 75 | 40 ~ 82 | 46 ~ 75 | 81 ~ 111 | 34 ~ 120 | 46 ~ 95 | 100 ~ 300 | 60 ~ 120 | 120 ~ 150 | 120 ~ 150 | 55 ~ 65 | 66 ~ 69 | - | 54 ~ 120 | 46 ~ 82 | 46 ~ 62 | 46 ~ 105 | 46 ~ 135 | 59 ~ 140 | 55 ~ 80 | 46 ~ 95 | 42 ~ 180 | 55 ~ 80 | 36 ~ 120 | 46 ~ 88 | 62 ~ 95 | 55 ~ 95 | 75.5 | 58 ~ 73 | 39 ~ 105 | 52 ~ 60 | 40 | 60 ~ 75 |
Loading...Tải…
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy