(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.
Tel: 0222-361-1555
Email: cs@misumi.com.vn
8:00 - 17:00 (Mon - Sat)
Search by Category / Brand Tìm theo danh mục, nhãn hiệu
Search by Category Tìm theo danh mục
- MISUMI Việt Nam đồng hành cùng Kỹ sư tương lai trong cuộc thi SMAE Award 2024. Xem chi tiết.
MISUMI Vietnam accompanies Future Engineers in the SMAE Award 2024 competition. See more.
Screw-Hole-Related Tools（Tool Material Type：Carbide）
Search by specifying the lower class categoryTìm kiếm bằng cách chỉ định danh mục lớp thấp hơn
Hand Taps
Spiral Taps
Point Taps
Roll Taps
Taps for Pipes
Thread Cutters
Thread-Cutting-Related Tools
Dies
Tap Wrenches
Modification/Removal Tools
Brand |
|
|---|---|
| CAD |
|
| Days to Ship |
|
84 itemsMặt hàng
- Sort By
-
You can add up to 6 items per a category to the compare list.
Tungsten Carbide Straight Flutes Tap for Hardened Steels (50 HRC〜)_VX-OT
OSG
Ideal for tapping hardened steel (alloy steel, die steel, tool steel, etc.) of 50 HRC or higher
From: 2,670,000 VND Days to Ship: Số ngày giao hàng: Same day or more 
Same day or more
-
You can add up to 6 items per a category to the compare list.
Tungsten Carbide Straight Flutes Tap for Hardened Steels (〜 55 HRC)_WH55-OT
OSG
Suitable for tapping hardening steel up to 55 HRC.Work material: High hardness steel to 55 HRCFor coating / surface treatment / steelAccuracy (class) OH3
From: 2,577,296 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
MISUMI
[Features]·Carbide uncoated type hand tap·Can be used for both blind holes and through holes·Suitable for mass production tapping of various cast iron
- Volume Discount
From: 781,751 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
From: 6,953,155 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
NS TOOL
[Features]・ Female threads with a nominal diameter of 0.1 mm can be machined.・ Helical thread-machining is performed, and the tool diameter is smaller than the pilot hole diameter, so it can be taken out and reworked when broken.・ A long lifespan is achieved by using MUGEN coating.
From: 1,842,278 VND Days to Ship: Số ngày giao hàng: 12 Day(s)
12 Day(s)
-
You can add up to 6 items per a category to the compare list.
From: 13,805,315 VND Days to Ship: Số ngày giao hàng: 23 Day(s)
23 Day(s)
-
You can add up to 6 items per a category to the compare list.
TiAlN Coated Carbide Threading Cutter, for High-Hardness Steel / for Internal Metric Threads
MISUMI
The left-flute left-rotary cutting that's achieved by the original geometry and coating allow the milling threading of high hardness steel of up to HRC62.
- Volume Discount
From: 7,894,879 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
NACHI(FUJIKOSHI)
Carbide tap with a TiCN coating treatment applied to the carbide base metal.[Features]· Excellent abrasion resistance and adhesion resistance.· Improved chip discharge performance and service life.[Applications]· Ideal for mass tapping of aluminum and cast iron, etc.
From: 2,906,728 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Carbide Taps for Light Alloys_N-CT-FC
YAMAWA MFG
A carbide tap suitable for thread machining of hard and brittle material such as cast iron.
From: 1,870,873 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Carbide taps for ultra hard materials_UH-CT
YAMAWA MFG
[SKD material] [Prehardened] Ideal for tapping 55 to 60 HRC (Max: 63 HRC). The machined length of the screw is 1.5 D or less, and the biting length is 5 threads for long life. We recommend using the maximum value 6H female thread bore for the pilot hole diameter.
From: 2,107,063 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
From: 6,952,849 VND Days to Ship: Số ngày giao hàng: 23 Day(s)
23 Day(s)
-
You can add up to 6 items per a category to the compare list.
TiAlN Coated Carbide Threading Cutter for Inner Diameter Metric Threads (manufactured by Carmex)
MISUMI
[Features]·Small diameter thread cutting from M1.4 × 0.3 (Pilot hole diameter ø1.1 mm) is possible·Reduced cutting load due to short flute length (3 ridges)·Enables effective thread cutting to corners of blind holes
- Volume Discount
From: 6,588,067 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Planet Cutter Series Small Diameter Planet Cutter WH-VM-PNC
OSG
Planet cutter that can be used to make small female threaded M1 to M5 holes by milling. Ideal for preventing defects in workpieces with high added value and for tapping without pilot holes
From: 2,083,136 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Tungsten Carbide Straight Flutes Tap_OTT
OSG
Ideal for tapping large amounts of ordinary cast iron, high-rigidity cast iron, thermosetting resin, brass cast iron, etc., using a high-precision automatic machine.
From: 1,842,672 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
From: 6,953,155 VND Days to Ship: Số ngày giao hàng: 23 Day(s)
23 Day(s)
-
You can add up to 6 items per a category to the compare list.
From: 7,023,079 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
DLC Coated Carbide Threading Cutter for Aluminum Machining, for Internal Metric Threads / 2D Model
MISUMI
[Features]·Carbide thread mill cutter capable of high-speed stable machining·Can be used for both blind holes and through holes·DLC coating with excellent abrasion resistance and chip-weld resistance makes it ideal for Non steel metals such as Aluminum and Copper
- Volume Discount
From: 3,376,609 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
MISUMI
[Features]·Carbide uncoated spiral flute tap·Can be used for blind hole machining·Suitable for mass production tapping of aluminum alloys and copper alloys
- Volume Discount
From: 781,751 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Planet Cutter Series NC Planet Cutter WX-PNC
OSG
If the pitch is the same, it can process threads with different nominals. Additionally, both right-handed and left-handed screws can be machined.
From: 5,378,313 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Taper Tap for Pipes TiN Coating, Interlapped Type TIN-IRT
OSG
A TiN coating with excellent chip-weld resistance and abrasion resistance is applied.
From: 1,199,060 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Tungsten Carbide Taper Pipe Thread Tap for Hardened Steels_VX-TPT
OSG
It exhibits excellent power for cutting hardened steels (steel alloy, die steel, tool steel, etc.) of 50 HRC to 60 HRC or more.
From: 6,456,913 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Grooveless Tap Series Carbide New Roll Tap OT-NRT
OSG
Suitable for tapping a large amount of aluminum alloy, magnesium alloy, copper alloy, etc. with a high-precision automatic machine. Since the thread is formed by plastic deformation, no cutting chips are generated and stable continuous machining is possible.
From: 2,462,338 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Tap remover Plus (regular size)
EIKOSHA
Repair/removal tool: Drill for removing broken HSS taps.[Features]· A recovery drill that sharpens the center of a broken HSS tap.· As it does not damage the screw threads, re-tapping can be performed after removal.[Applications]· Used as a recovery tool when HSS taps are broken.
From: 2,375,830 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Thread Cutter for Blind Hole/Through Hole TM SP for 2×D 3737
GUHRING
[Features]· Threading is performed with helical cutting.· If the pitch is the same, one unit can process threads with different diameters.· Both right-handed and left-handed female threads can be machined.
From: 6,510,975 VND Days to Ship: Số ngày giao hàng: 25 Day(s) or more
25 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
From: 1,537,966 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
From: 1,738,037 VND Days to Ship: Số ngày giao hàng: 8 Day(s)
8 Day(s)
-
You can add up to 6 items per a category to the compare list.
From: 10,931,874 VND Days to Ship: Số ngày giao hàng: 23 Day(s)
23 Day(s)
-
You can add up to 6 items per a category to the compare list.
From: 5,267,542 VND Days to Ship: Số ngày giao hàng: 23 Day(s)
23 Day(s)
-
You can add up to 6 items per a category to the compare list.
From: 5,267,542 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
From: 8,261,002 VND Days to Ship: Số ngày giao hàng: 23 Day(s)
23 Day(s)
-
You can add up to 6 items per a category to the compare list.
NACHI(FUJIKOSHI)
[Features]· Suitable for long life thread processing of aluminum and cast iron.
From: 4,150,393 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Thread Cutting Tool (for Unified Threads) MMTU
NS TOOL
[Features]· It adopts a flute shape with an emphasis on sharpness, improving machining accuracy.· It adopts MUGEN Coating Premium for the realization of a long lifespan.· For Unify standard threads
From: 2,026,665 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
TiAlN Coated Carbide Threading Cutter for Inner Diameter Metric Threads
MISUMI
Threading cutters that enable the high-speed stable processing are available at special prices
- Volume Discount
From: 2,989,799 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
TS Coated Carbide Threading Cutter, for Internal Metric Threads
MISUMI
[Features]··Carbide thread mill cutter capable of high-speed stable machining·Can be used for both blind holes and through holes··It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
- Volume Discount
From: 5,701,428 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Tungsten Carbide Spiral Tap_OT-SFT
OSG
Suitable for tapping blind holes of aluminum alloy / magnesium alloy / copper alloy / thermoplastic, etc., in large quantities with high precision automatic machines.
From: 2,438,333 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Tungsten Carbide Straight Flutes Tap with Long Shank_LT-OTT
OSG
It is ideal for tapping a large amount of ordinary cast iron, high-dust cast iron, thermosetting resin, brass casting, etc. with a high-precision automatic machine.
From: 3,442,123 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Planet Cutter Series Super Planet DR-PNAC
OSG
A composite tool capable of pilot drilling + chamfering + female threading, that eliminates the need for tool exchange, reduces time between machining, and improves productivity
From: 11,690,060 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Planet Cutter Series Super Planet With Oil Hole DR-O-PNAC
OSG
A composite tool capable of pilot drilling + chamfering + female threading, that eliminates the need for tool exchange, reduces time between machining, and improves productivity
From: 11,099,508 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Planet Cutter Series Planet Cutter For Steel With Oil Hole WXO-ST-PNC
OSG
Enables efficient chip discharge by discharging cutting fluid from the oil holes.
From: 5,876,603 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Taper Pipe Thread Tap TiN coated with Interrupted Threads (Short Thread)_TIN-S-IRT
OSG
A TiN coating with excellent chip-weld resistance and abrasion resistance is applied.
From: 1,262,806 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Long Shank・with Interrupted Threads_EX-LT-IRT
OSG
It is suitable for difficult-to-cut materials such as stainless steel and heat-resistant alloys that have a work hardened layer on the surface and are susceptible to welding.
From: 1,548,866 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Taper Pipe Thread Tap with Interrupted Threads (Short Threads)_EX-S-IRT
OSG
It is suitable for difficult-to-cut materials such as stainless steel and heat-resistant alloys that have a work hardened layer on the surface and are susceptible to welding.
From: 895,371 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Long Shank・with Interrupted Threads(Shot Thread)_EX-LT-S-IRT
OSG
It is suitable for difficult-to-cut materials such as stainless steel and heat-resistant alloys that have a work hardened layer on the surface and are susceptible to welding.
From: 1,615,800 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Taper Pipe Thread Tap for Stainless Steels with Long Shank_LT-SUS-TPT
OSG
This is a long shank type used for machining female tapered pipe threads. It is suitable for difficult-to-cut materials such as stainless steel.
From: 1,240,895 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Taper Pipe Thread Tap for Stainless Steels (Short Thread)_EX-SUS-S-TPT
OSG
This is a short thread type used for machining female tapered pipe threads. It is suitable for difficult-to-cut materials such as stainless steel.
From: 778,465 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
| BrandNhãn hiệu |
|---|
| Product SeriesDòng sản phẩm |
| From |
| Days to ShipSố ngày giao hàng |
| Screw size (Nominal) |
| Screw Types |
| work material |
| Pitch (P), Number of Threading(mm) |
| Tool Material Type |
| Tap Type |
| Hole type |
| Chamfer threads (Lcf) |
| Coating Type |
| Coating Y/N |
| Overall Length (L)(mm) |
You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | |
| BrandNhãn hiệu | OSG | OSG | MISUMI | CARMEX | NS TOOL | CARMEX | MISUMI | NACHI(FUJIKOSHI) | YAMAWA MFG | YAMAWA MFG | CARMEX | MISUMI | OSG | OSG | CARMEX | CARMEX | MISUMI | MISUMI | OSG | OSG | OSG | OSG | EIKOSHA | GUHRING | YG 1 | YG 1 | CARMEX | CARMEX | CARMEX | CARMEX | NACHI(FUJIKOSHI) | NS TOOL | MISUMI | MISUMI | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG |
| Product SeriesDòng sản phẩm | Tungsten Carbide Straight Flutes Tap for Hardened Steels (50 HRC〜)_VX-OT | Tungsten Carbide Straight Flutes Tap for Hardened Steels (〜 55 HRC)_WH55-OT | TiAlN Coated Carbide Threading Cutter, for High-Hardness Steel / for Internal Metric Threads | TiAlN Coated Carbide Threading Cutter for Inner Diameter Metric Threads (manufactured by Carmex) | DLC Coated Carbide Threading Cutter for Aluminum Machining, for Internal Metric Threads / 2D Model | Tungsten Carbide Taper Pipe Thread Tap for Hardened Steels_VX-TPT | Thread Cutter for Blind Hole/Through Hole TM SP for 2×D 3737 | Mill-Thread Solid Carbidewith Coolant Through The Flute-G55°, flutes | TiAlN Coated Carbide Threading Cutter for Inner Diameter Metric Threads | TS Coated Carbide Threading Cutter, for Internal Metric Threads | Planet Cutter Series Planet Cutter For Steel With Oil Hole WXO-ST-PNC | Taper Pipe Thread Tap TiN coated with Interrupted Threads (Short Thread)_TIN-S-IRT | Taper Pipe Thread Tap with Interrupted Threads (Short Threads)_EX-S-IRT | Long Shank・with Interrupted Threads(Shot Thread)_EX-LT-S-IRT | Taper Pipe Thread Tap for Stainless Steels with Long Shank_LT-SUS-TPT | Taper Pipe Thread Tap for Stainless Steels (Short Thread)_EX-SUS-S-TPT | |||||||||||||||||||||||||||||
| From | 2,670,000 VND | 2,577,296 VND | 781,751 VND | 6,953,155 VND | 1,842,278 VND | 13,805,315 VND | 7,894,879 VND | 2,906,728 VND | 1,870,873 VND | 2,107,063 VND | 6,952,849 VND | 6,588,067 VND | 2,083,136 VND | 1,842,672 VND | 6,953,155 VND | 7,023,079 VND | 3,376,609 VND | 781,751 VND | 5,378,313 VND | 1,199,060 VND | 6,456,913 VND | 2,462,338 VND | 2,375,830 VND | 6,510,975 VND | 1,537,966 VND | 1,738,037 VND | 10,931,874 VND | 5,267,542 VND | 5,267,542 VND | 8,261,002 VND | 4,150,393 VND | 2,026,665 VND | 2,989,799 VND | 5,701,428 VND | 2,438,333 VND | 3,442,123 VND | 11,690,060 VND | 11,099,508 VND | 5,876,603 VND | 1,262,806 VND | 1,548,866 VND | 895,371 VND | 1,615,800 VND | 1,240,895 VND | 778,465 VND |
| Days to ShipSố ngày giao hàng | Same day or more | 6 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 12 Day(s) | 23 Day(s) | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 4 Day(s) or more | 23 Day(s) | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 23 Day(s) | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 25 Day(s) or more | 4 Day(s) or more | 8 Day(s) | 23 Day(s) | 23 Day(s) | 4 Day(s) or more | 23 Day(s) | 6 Day(s) or more | 6 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more |
| Screw size (Nominal) | M2 ～ M20 | M3 ～ M12 | M3 ～ M10 | - | S0.1 ～ S1.4 | - | M2 ～ M12 | M3 ～ M12 | No.10-32UNF ～ M24 | M2 ～ M20 | - | M1.4 ～ M20 | - | M1.4 ～ M20 | - | - | M3 ～ M16 | M3 ～ M10 | - | R1 ～ R3/8 | R1/2 ～ R3/8 | M3 ～ M12 | M3 ～ M24 | M6 ～ M20 | M3 ～ M12 | M5 ～ M8 | - | - | - | - | M4 ～ M12 | NO.0-80UNF ～ 1/4-20UNC | M3 ～ M20 | M3 ～ M12 | M3 ～ M12 | M3 ～ M20 | M6 ～ M12 | M6 ～ M12 | - | R1 ～ R3/8 | R1 ～ R3/8 | R1 ～ R3/8 | R1 ～ R3/8 | R1/2 ～ R3/8 | R1 ～ R3/8 |
| Screw Types | Meter | Meter | Meter | - | Other | - | Meter | Meter | Meter / unified | Meter | - | Meter | Meter / unified | Meter | - | - | Meter | Meter | Meter / unified / Taper for Pipe | Taper for Pipe | Taper for Pipe | Meter | - | Meter | Meter | Meter | - | - | - | - | Meter | unified | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Taper for Pipe | Taper for Pipe | Taper for Pipe | Taper for Pipe | Taper for Pipe | Taper for Pipe |
| work material | High Hardness Steel (50-60 HRC)[◎] | Quenched and tempered steel (45 to 55 HRC)[◎] | Steel casting (SC)[○] / Cast Iron (FC)[○] / Aluminum Rolled Material (AL)[○] | - | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Quenched and tempered steel (45 to 55 HRC)[◎] / High Hardness Steel (50-60 HRC)[○] / Tool Steel (Before SKD Hardening)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Titanium Alloy (Ti-6Al-4V, etc)[◎] / Thermosetting plastic (bakelite, phenol, etc.)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎] | - | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Quenched and tempered steel (45 to 55 HRC)[◎] / High Hardness Steel (50-60 HRC)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] | Cast Iron (FC)[◎] / Copper (Cu)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] | Quenched and tempered steel (45 to 55 HRC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] | High Hardness Steel (50-60 HRC)[○] | - | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○/◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Quenched and tempered steel (45 to 55 HRC)[◎] / High Hardness Steel (50-60 HRC)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass cast iron (BsC)[○/◎] / Aluminum Rolled Material (AL)[○/◎] / Aluminum Alloy Casting (AC, ADC)[○/◎] / Magnesium Alloy (MC)[○/◎] / Zinc Alloy Casting (ZDC)[○/◎] / Titanium Alloy (Ti-6Al-4V, etc)[○/◎] / Nickel-based alloy (Inconel, etc.)[◎] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[◎] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermosetting plastic (bakelite, phenol, etc.)[◎] | - | - | Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[◎] / Aluminum Rolled Material (AL)[◎] | Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[◎] / Aluminum Rolled Material (AL)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[◎] / Nickel-based alloy (Inconel, etc.)[◎] / Thermosetting plastic (bakelite, phenol, etc.)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Stainless steel (SUS)[◎] | High Hardness Steel (50-60 HRC)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎] | - | - | Cast Iron (FC)[◎] / Copper (Cu)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Copper (Cu)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] | - | - | - | - | Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Quenched and tempered steel (45 to 55 HRC)[◎] / Tool Steel (Before SKD Hardening)[◎] / Copper (Cu)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Titanium Alloy (Ti-6Al-4V, etc)[◎] / Nickel-based alloy (Inconel, etc.)[◎] / Thermosetting plastic (bakelite, phenol, etc.)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / High Hardness Steel (50-60 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] | Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermosetting plastic (bakelite, phenol, etc.)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[◎] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermosetting plastic (bakelite, phenol, etc.)[◎] | Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[◎] / Zinc Alloy Casting (ZDC)[◎] | Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[○] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[◎] / Zinc Alloy Casting (ZDC)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Stainless steel (SUS)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Stainless steel (SUS)[◎] / Cast Iron (FC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Stainless steel (SUS)[◎] / Cast Iron (FC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Stainless steel (SUS)[◎] / Cast Iron (FC)[○] | Stainless steel (SUS)[◎] / Copper (Cu)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Stainless steel (SUS)[◎] / Copper (Cu)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] |
| Pitch (P), Number of Threading(mm) | 0.4 ～ 2.5 | 0.5 ～ 1.75 | 0.5 ～ 1.5 | - | 0.025 ～ 0.3 | - | 0.4 ～ 1.75 | 0.5 ～ 1.75 | 0.3 ～ 3 | 0.4 ～ 2.5 | - | 0.3 ～ 2.5 | 0.25 ～ 32 | 0.3 ～ 2.5 | - | - | 0.5 ～ 2 | 0.5 ～ 1.5 | 1 ～ 28 | 11 ～ 28 | 14 ～ 28 | 0.5 ～ 1.75 | - | 1 ～ 2.5 | 0.5 ～ 1.75 | 0.8 ～ 1.25 | - | - | - | - | 0.7 ～ 1.75 | - | 0.5 ～ 2.5 | 0.5 ～ 1.75 | 0.5 ～ 1.75 | 0.5 ～ 2.5 | 1 ～ 1.75 | 1 ～ 1.75 | 0.5 ～ 3 | 11 ～ 28 | 11 ～ 28 | 11 ～ 28 | 11 ～ 28 | 14 ～ 28 | 11 ～ 28 |
| Tool Material Type | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide |
| Tap Type | Hand Tap | Hand Tap | Hand Tap | - | Thread cutter | - | Thread cutter | Hand Tap | Hand Tap | Point tap | - | Thread cutter | Thread cutter | Hand Tap | - | - | Thread cutter | Spiral Tap | Thread cutter | Tap for pipes | Tap for pipes | Roll tap | Modification/removal Tool | Thread cutter | Hand Tap | Spiral Tap | - | - | - | - | Spiral Tap | Thread cutter | Thread cutter | Thread cutter | Spiral Tap | Hand Tap | Thread cutter | Thread cutter | Thread cutter | Tap for pipes | Tap for pipes | Tap for pipes | Tap for pipes | Tap for pipes | Tap for pipes |
| Hole type | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | - | - | - | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | - | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | - | - | For through hole / For blind hole | For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | - | For through hole / For blind hole | For blind hole | For blind hole | - | - | - | - | For through hole / For blind hole | For blind hole | For through hole / For blind hole | For through hole / For blind hole | For blind hole | For through hole / For blind hole | For through hole / For blind hole | For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole |
| Chamfer threads (Lcf) | 3P | 2.5P ～ 5P | 1.5P ～ 3P | - | - | - | - | 1.5P ～ 3P | 1.5P ～ 3P | 5P | - | - | - | 1.5P ～ 3P | - | - | - | 1.5P ～ 2.5P | - | 2.5P | 3P | 2P | - | - | 1.5 | 1.5 | - | - | - | - | 2.5 | - | - | - | 1.5P ～ 2.5P | 1.5P ～ 3P | - | - | - | 2.5P | 2.5P | 2.5P | 2.5P | 2.5P | 2.5P |
| Coating Type | TiCN / Other | TiCN | - | - | TiAlN | - | TiAlN | TiCN | - | TiAlN | - | TiAlN | For High Hardness (Silicon Group) / Other | Non-Coated | - | - | DLC | - | TiAlN | TiN | TiCN | Non-Coated | Other | TiCN | - | Non-Coated | - | - | - | - | TiCN | TiAlN | TiAlN | For High Hardness (Silicon Group) | Non-Coated | Non-Coated | TiAlN | TiAlN | TiAlN | TiN | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated |
| Coating Y/N | Available | Available | NA | - | Available | - | Available | Available | NA | Available | - | Available | Available | NA | - | - | Available | NA | Available | Available | Available | NA | Available | Available | NA | NA | - | - | - | - | Available | Available | Available | Available | NA | NA | Available | Available | Available | Available | NA | NA | NA | NA | NA |
| Overall Length (L)(mm) | 40 ～ 105 | 46 ～ 82 | 46 ～ 75 | 58 ～ 120 | 45 | 110 ～ 200 | 58 ～ 73 | 46 ～ 82 | 34 ～ 120 | 40 ～ 105 | 58 ～ 105 | 39 ～ 105 | 40 | 34 ～ 105 | 58 ～ 105 | 64 ～ 105 | 57 ～ 92 | 46 ～ 75 | 60 ～ 120 | 55 ～ 95 | 59 ～ 87 | 46 ～ 82 | 40 ～ 120 | 54 ～ 102 | 46 ～ 82 | 60 ～ 70 | 73 ～ 84 | 58 ～ 105 | 58 ～ 105 | 58 ～ 101 | 52 ～ 82 | 45 | 57 ～ 115 | 48 ～ 74 | 46 ～ 82 | 100 ～ 150 | 62 ～ 89 | 62 ～ 89 | 60 ～ 120 | 55 ～ 95 | 120 ～ 150 | 55 ～ 95 | 120 ～ 150 | 100 ～ 150 | 55 ～ 95 |
Loading...Tải…
ConfigureTạo
Specification/DimensionsĐặc điểm kỹ thuật / Kích thướcĐặc điểm kỹ thuật / Kích thước
-
Screw size (Nominal)
- CTG-54
- CTG-42
- CTG-36
- CTG-28
- CTG-22
- CTG-16
- PT-1-11
- NPT-1-11-1-2
- PT-1-1-2-11
- No.0
- No.0UN
- NO.0-80UNF
- No.10
- No.1
- No.1UN
- No.10UN
- S0.1
- NO.1-72UNF
- NO.1-64UNC
- NO.10-32UNF
- No.10-32UNF
- NO.10-24UNC
- No.10-24UNC
- No.12
- No.12UN
- NO.12-28UNF
- No.12-28UNF
- NO.12-24UNC
- No.12-24UNC
- No.2
- No.2UN
- S0.2
- NO.2-64UNF
- No.2-64UNF
- NO.2-56UNC
- No.2-56UNC
- No.3
- No.3UN
- S0.3
- NO.3-56UNF
- No.3-56UNF
- NO.3-48UNC
- No.3-48UNC
- No.4
- No.4UN
- S0.4
- NO.4-48UNF
- No.4-48UNF
- NO.4-40UNC
- No.4-40UNC
- No.5
- No.5UN
- S0.5
- NO.5-44UNF
- No.5-44UNF
- NO.5-40UNC
- No.5-40UNC
- 0.6
- No.6
- No.6UN
- S0.6
- NO.6-40UNF
- No.6-32UNC
- S0.7
- No.8
- No.8UN
- S0.8
- NO.8-36UNF
- No.8-36UNF
- NO.8-32UNC
- No.8-32UNC
- S0.9
- 1
- 1"
- 1UN
- 1UNS
- G1
- M1
- NPS1
- NPT1
- NPT 1"
- NPTF1
- PF1
- PF 1
- PF 1"
- PS 1
- PS 1"
- PT1
- PT1"
- PT 1
- PT 1"
- R1
- Rp1
- S1
- UNC1
- UNF1
- W1
- 1"-12
- 1'-11.5
- 1'-11
- PF1-11
- PT1-11
- 1-8UNC
- 1"-8
- 1"-8UNC
- PS1-1/2
- PS1-1/4
- 1 1/2
- 1"1/2UN
- G1"1/2
- NPS1"1/2
- NPT1"1/2
- NPT 1"1/2
- PF 1"1/2
- PT1"1/2
- PT 1 1/2
- R1"1/2
- W1"1/2
- 1'1/2-11
- 1 1/2-8UN
- 1 1/4
- 1"1/4UN
- G1"1/4
- NPS1"1/4
- NPT1"1/4
- PF 1"1/4
- PT1"1/4
- PT 1 1/4
- PT 1"1/4
- R1"1/4
- W1"1/4
- 1'1/4-11.5
- 1'1/4-11
- 1 1/4-8UN
- 1 1/8
- 1"1/8UN
- G1"1/8
- R1"1/8
- W1"1/8
- 1'1/8-11
- 1 1/8-8UN
- 1 1/16
- 1"1/16UN
- 1/2
- 1/2UN
- G1/2
- NPS1/2
- NPT1/2
- NPT 1/2
- NPTF1/2
- PF1/2
- PF 1/2
- PS1/2
- PS 1/2
- PT1/2
- PT 1/2
- R1/2
- Rc1/2
- Rp1/2
- UNC1/2
- UNF1/2
- W1/2
- 1/2-20
- 1/2-20UNF
- 1/2-14
- PF1/2-14
- PT1/2-14
- 1/2-13
- 1/2-13UNC
- 1/2-12
- 1/2-12W
- 1/2(1/16'-1/2)
- 1/2W12
- 1/2 - 13
- 1/2 - 20
- 1 3/4
- 1"3/4UN
- G1"3/4
- R1"3/4
- W1"3/4
- 1'3/4-11
- 1 3/4-8UN
- 1"3/4-5UNC
- 1 3/8
- 1"3/8UN
- G1"3/8
- R1"3/8
- W1"3/8
- 1 3/8-8UN
- 1/4
- 1/4UN
- 1/4UNJ
- G1/4
- NPS1/4
- NPT1/4
- NPT 1/4
- NPTF1/4
- PF1/4
- PF 1/4
- PS1/4
- PS 1/4
- PT1/4
- PT 1/4
- R1/4
- Rc1/4
- Rp1/4
- SM1/4
- UNC1/4
- UNF1/4
- W1/4
- 1/4-28
- 1/4-28UNF
- 1/4-20
- 1/4-20UNC
- 1/4-19
- PF1/4-19
- PT1/4-19
- 1/4-18
- 1/4(1/16'-1/4)
- 1/4 - 20
- 1/4W20
- 1 5/8
- W1"5/8
- 1 5/8-8UN
- M1 to 6
- W1"7/8
- 1 7/8-8UN
- 1" - 8
- 1'W8
- 1/8
- G1/8
- NPS1/8
- NPT1/8
- NPT 1/8
- NPTF1/8
- PF1/8
- PF 1/8
- PS1/8
- PS 1/8
- PT1/8
- PT 1/8
- R1/8
- Rc1/8
- Rp1/8
- SM1/8
- W1/8
- 1/8-40W
- 1/8-28
- PF1/8-28
- PT1/8-28
- 1/8-27
- 1/8-18
- M1 to 10
- 1 12
- 1" - 12
- 1" - 14
- 1/16
- G1/16
- NPS1/16
- NPT1/16
- NPT 1/16
- PT1/16
- PT 1/16
- R1/16
- 1/16-28
- 1/16-27
- 1 20
- M1.1
- M1.2
- S1.2
- 1.25
- M1.4
- S1.4
- 1.5
- M1.6
- M1.7
- M1.8
- 2
- 2UN
- G2
- M2
- M2.0
- NPS2
- NPT2
- NPT 2"
- PF 2"
- PS 2
- PS 2"
- PT2"
- PT 2
- PT 2"
- R2
- W2
- NO 2-56
- 2'-11.5
- 2'-11
- 2-8UN
- W2"1/4
- 2'1/4-11
- 2~2.5
- 2 4.5
- M2 to 4.5
- M2.2
- M 2.2
- M2.3
- M2.5
- M2.6
- 3
- 3M
- M3
- M3.0
- M 3
- M 3.0
- STI M3
- PS3-8-19
- NPT3-8-18
- 3/4
- 3/4UN
- G3/4
- NPS3/4
- NPT3/4
- NPT 3/4
- NPTF3/4
- PF3/4
- PF 3/4
- PS 3/4
- PT3/4
- PT 3/4
- R3/4
- Rp3/4
- UNC3/4
- UNF3/4
- W3/4
- 3/4-16
- 3/4-16UNF
- 3/4-14
- PF3/4-14
- PT3/4-14
- 3/4-10
- 3/4-10UNC
- 3/4 - 10
- 3/4W10
- 3/4 - 16
- 3/8
- 3/8-UNJ
- 3/8UN
- G3/8
- NPS3/8
- NPT3/8
- NPT 3/8
- NPTF3/8
- PF3/8
- PF 3/8
- PS3/8
- PS 3/8
- PT3/8
- PT 3/8
- R3/8
- Rc3/8
- Rp3/8
- UNC3/8
- UNF3/8
- W3/8
- 3/8-24
- 3/8-24UNF
- 3/8-19
- PF3/8-19
- PT3/8-19
- 3/8-18
- 3/8-16
- 3/8-16UNC
- 3/8 - 16
- 3/8W16
- 3/8 - 24
- 3~10
- M3 to 10
- 3/16
- SM3/16
- W3/16
- 3/16-32SM
- 3/16-24W
- 3/32
- SM3/32
- # 3 - 48
- # 3 - 56
- 3.5
- M3.5
- M3.5
- 4
- 4M
- M4
- M4.0
- M 4
- M 4.0
- STI M4
- NO 4-40
- M4 to 6
- M4 to 13
- # 4 - 40
- # 4 - 48
- M4.5
- M4.5
- 5
- 5M
- M5
- M5.0
- M5
- M 5
- M 5.0
- STI M5
- 5/8
- 5/8UN
- G5/8
- NPS5/8
- PT5/8
- R5/8
- UNC5/8
- UNF5/8
- W5/8
- 5/8-18
- 5/8-18UNF
- 5/8-14
- 5/8-11
- 5/8-11UNC
- 5/8 - 11
- 5/8W11
- 5/8 - 18
- M5 to 10
- M5-M12
- M5 to 13
- 5/16
- 5/16UN
- 5/16UNJ
- UNC5/16
- UNF5/16
- W5/16
- 5/16-24
- 5/16-24UNF
- 5/16-18
- 5/16-18UNC
- 5/16 - 18
- 5/16W18
- 5/16 - 24
- 5/32
- W5/32
- 5/32-36 UNC
- 5/32-32W
- # 5 - 40
- 5.5M
- M5.5
- M5.5
- 6
- M6
- M6.0
- M 6
- M 6.0
- STI M6
- No6-40UNF
- 6-32UNC
- NO 6-32
- M6 to 20
- # 6 - 32
- # 6 - 40
- M7
- M7.0
- M7
- M 7.0
- PG7
- 7/8
- 7/8UN
- G7/8
- NPS7/8
- PT7/8
- R7/8
- UNC7/8
- UNF7/8
- W7/8
- 7/8-14
- 7/8-14UNF
- 7/8-9
- 7/8-9UNC
- 7/8- 9
- 7/8W9
- 7/8- 14
- 7/16
- 7/16UN
- UNC7/16
- UNF7/16
- W7/16
- 7/16-20
- 7/16-20UNF
- 7/16-14UNC
- 7/16 - 14
- 7/16W14
- 7/16 - 20
- 7/32
- SM7/32
- 7/32-24W
- 7/64
- 7.5
- 8
- #8
- M8
- M8.0
- M 8.0
- STI M8
- TV8
- 8-32UNC
- NO 8-32
- # 8 - 32
- # 8 - 36
- 9
- M9
- M9
- PG9
- 9/16
- 9/16UN
- UNF9/16
- W9/16
- 9/16-18
- 9/16-18UNF
- 9/16-12
- 9/16-12UNC
- 9/16 - 12
- 9/16 - 18
- SM9/32
- 9/64
- SM9/64
- 10
- M10
- M10.0
- M10
- STI M10
- Tr 10
- 10-32UNF
- NO 10-32
- NO 10-24
- M10 to 13
- #10 - 24
- M10 to 25
- #10 - 32
- M11
- M11
- PG11
- 11/2
- NPT 11/2
- PF 11/2
- PS 11/2
- PT 11/2
- 11/4
- NPT 11/4
- PF 11/4
- PS 11/4
- PT 11/4
- 11/8
- 11/16
- 11~24
- SM11/32
- 11/64
- SM11/64
- 12
- M12
- M12.0
- M12
- STI M12
- Tr 12
- 12-1.0-2
- #12 - 24
- M13
- 13/4
- 13/8
- 13/16
- 13/32
- PG13.5
- 14
- M14
- M14.0
- M14
- Tr 14
- M15
- 15/8
- 15/64
- SM15/64
- 16
- M16
- M16.0
- M16
- PG16
- Tr 16
- M17
- 17/8
- 17/16
- 17/32
- 17/64
- 18
- M18
- M18.0
- M18
- Tr 18
- M19
- M19 to 32
- M19 to 38
- 20
- M20
- M20.0
- M20
- Tr 20
- M21
- PG21
- 22
- M22
- M22.0
- M22
- M22X
- Tr 22
- 22-1.0
- M23
- 24
- M24
- M24.0
- M24
- M24X
- Tr 24
- 24-2.0-2
- 25
- M25
- M25X
- Tr 25
- M25 to 50
- M25 to 70
- M26
- Tr 26
- 27
- M27
- M27.0
- 27~36
- M28
- Tr 28
- PG29
- 30
- M30
- M30.0
- Tr 30
- M32
- 33
- M33
- M34
- M35
- 36
- M36
- PG36
- M38
- 39
- M39
- M40
- 42
- M42
- PG42
- M44
- 45
- M45
- M48
- M50
- M56
- M64
- 1015
- 1020N100M
- 1020N150M
- 06510X28R
- 10154
- 12204
- 12254N100M
- 12254N150M
- 12254N200M
- 16304N100M
- 16304N150M
- 16304N200M
- 16304N250M
- 20305
- 20505N100M
- 20505N150M
- 20505N200M
- 20505N300M
- 20505N350M
- 25506N100M
- 25506N150M
- 25506N200M
- 25506N300M
- 25506N350M
- 32506
- 32506N150M
- 32506N200M
- 32506N300M
- 035083N075M
- 035083N080M
- 040123N100M
- 060163N050M
- 060163N100M
- 060163N125M
- 065103X28G
- 075203N125M
- 075203N150M
- 080153X19G
- 080153X19R
- 080203N050M
- 080203N100M
- 090244N125M
- 090244N175M
- 100254N050M
- 100254N100M
- 100254N150M
- 100254N200M
- 120204X14G
- 120204X14R
- 120304N100M
- 120304N150M
- 120304N200M
- 160264X11G
- 160264X11R
- 160404N150M
- 160404N200M
- 160404N250M
- 200305X11G
- 200305X11R
- 200505N150M
- 200505N200M
- 200505N300M
-
Screw Types
- Meter
- unified
- Whitworth
- Sewing Machine
- Taper for Pipe
- Parallel for Pipes
- Trapezoid
- Miniature
- Other
-
work material
- Low-Carbon Steel (carbon alloy less than 0.25%)
- Medium carbon steel (carbon content 0.25 to 0.45%)
- High Carbon Steel (C with a content over 0.45%)
- Alloy Steel (SCM)
- Stainless steel (SUS)
- Quenched and tempered steel (25 to 35 HRC)
- Quenched and tempered steel (35 to 45 HRC)
- Quenched and tempered steel (45 to 55 HRC)
- High Hardness Steel (50-60 HRC)
- Tool Steel (Before SKD Hardening)
- Steel casting (SC)
- Cast Iron (FC)
- Ductile Cast Iron (FCD)
- Copper (Cu)
- Brass (Bs)
- Brass cast iron (BsC)
- Bronze (Pb)
- Aluminum Rolled Material (AL)
- Aluminum Alloy Casting (AC, ADC)
- Magnesium Alloy (MC)
- Zinc Alloy Casting (ZDC)
- Titanium Alloy (Ti-6Al-4V, etc)
- Nickel-based alloy (Inconel, etc.)
- Thermosetting plastic (bakelite, phenol, etc.)
- Thermoplastic plastic (vinyl chloride, nylon, etc.)
-
Pitch (P), Number of Threading(mm)
- .02
- 0.025
- 0.05
- 0.08
- 0.1
- 0.125
- 0.15
- 0.175
- 0.2
- 0.225
- 0.25
- 0.3
- 0.35
- 0.4
- 0.45
- 0.5
- 0.6
- 0.7
- 0.75
- 0.75、1.00、1.25、1.50、1.75、2.00、2.50、3.00
- 0.8
- 0.9
- 1
- 1-1/8-7~1-1/26
- 1.2
- 1.25
- 1.5
- 1.7
- 1.75
- 2
- 2-56~8-32
- 2.5
- 3
- 3/8-16~1-8
- 3.5
- 4
- 4 1/2 UNC
- 4.5
- 5
- 5 UNC
- 5.5
- 6
- 6 UNC
- 7
- 7 UNC
- 8
- 8 UNC
- 8 UNS
- 8DØ
- 8J UNS
- 9
- 9 UNC
- 10
- 10 UNC
- 10-24~5/16-18
- 10、11、12、14、16、18、20、24F
- 11
- 11 UNC
- 11 1/2
- 11 1/2DØ
- 11.5
- 12
- 12 UNF
- 12 UNS
- 13
- 13 UNC
- 14
- 14 UNC
- 14 UNF
- 14 UNS
- 14DØ
- 16
- 16 UNC
- 16 UNF
- 16UNC
- 18
- 18 UNC
- 18 UNF
- 18DØ
- 19
- 20
- 20 UNC
- 20 UNF
- 20UNC
- 24
- 24 UNF
- 27
- 27DØ
- 28
- 28 UNF
- 32
- 32UNC
- 36
- 40
- 44
- 48
- 56
- 64
- 72
- 80
- 150
-
Tool Material Type
- High-speed steel
- Cobalt HSS
- Powder high-speed steel
- Carbide
- Alloy HSS
- Vanadium High-Speed Steel
- SKS
-
Tap Type
-
Hole type
-
Chamfer threads (Lcf)
-
Coating Type
-
Coating Y/N
-
Overall Length (L)(mm)
Related Categories to Screw-Hole-Related ToolsDanh mục liên quan đến Screw-Hole-Related Tools
-
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
MISUMI Contact
TALK ID : Misumi_vn
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy