(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.
Tel: 0222-361-1555
Email: cs@misumi.com.vn
8:00 - 17:00 (Mon - Sat)
Search by Category / Brand Tìm theo danh mục, nhãn hiệu
Search by Category Tìm theo danh mục
- Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 8:00 to 20:00 (ICT) 16/6/2024. We apologize for the inconvenience.
- MISUMI Việt Nam đẩy mạnh hợp tác với cơ sở đào tạo nhằm nâng cao chất lượng nguồn nhân lực kỹ sư tương lai. Xem chi tiết.
MISUMI Vietnam cooperates with Training Institutions to enhance the quality of future engineering workforce. See more.
Screw-Hole-Related Tools（Tool Material Type：High-speed steel Page3）
Search by specifying the lower class categoryTìm kiếm bằng cách chỉ định danh mục lớp thấp hơn
Hand Taps
Spiral Taps
Point Taps
Roll Taps
Taps for Pipes
Thread Cutters
Thread-Cutting-Related Tools
Dies
Tap Wrenches
Modification/Removal Tools
Brand |
|
|---|---|
| CAD |
|
| Days to Ship |
|
221 itemsMặt hàng
- Sort By
-
You can add up to 6 items per a category to the compare list.
NACHI(FUJIKOSHI)
A roll type tap that does not expel chips.[Features]· The TAFLET series uses workpiece plastic fluidity to raise screw threads and create female threads.· It does not produce chips and provides stable screw accuracy.· The fiber flow of the material is not interrupted and therefore the strength of the female threads is strong.[Applications]· Ideal for rolled threading of non-ferrous metals such as aluminum.
From: 355,865 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more 
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Straight Flutes Insert Screw Thread Tap_HL-HT
OSG
Used for tapping the female thread into which the helical coil is inserted. The pitch is the same as a normal tap with the same nominal size, but the outer diameter is made larger by the size of the insert.
From: 360,800 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Taper Tap for Pipes Spiral Tap, Long Shank Short Screw LT-SFT-S-TPT
OSG
It is used to machine female tapered pipe threads, and it is suitable for blind holes and machining conditions where cutting chip clogging is likely to occur.
From: 1,303,463 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Taper Tap for Pipes General Use (Left-hand thread) TPT
OSG
Used to machine female tapered pipe threads. Long screw type mainly used for connecting pipe-shaped products
From: 1,773,333 VND Days to Ship: Số ngày giao hàng: 21 Day(s)
21 Day(s)
-
You can add up to 6 items per a category to the compare list.
Taper Pipe Thread Tap for General Application (with OX)_H-TPT
OSG
Used to machine female tapered pipe threads. Long screw type mainly used for connecting pipe-shaped products
From: 605,306 VND Days to Ship: Số ngày giao hàng: 20 Day(s)
20 Day(s)
-
You can add up to 6 items per a category to the compare list.
Parallel Tap for Pipes Spiral Tap, Long Shank LT-SFT-SPT
OSG
A point type is available for through holes and a spiral type is provided for blind holes according to the workpiece shape.
From: 1,501,363 VND Days to Ship: Số ngày giao hàng: 20 Day(s)
20 Day(s)
-
You can add up to 6 items per a category to the compare list.
Grooveless Tap Series V Coating, Long Shank for Deep Holes V-LT-DH-NRT
OSG
V (composite multi-layer coating) achieves high durability.Work material: General steel / stainless steel / aluminum / copperCoating: Surface treatment for steel
From: 966,785 VND Days to Ship: Số ngày giao hàng: 20 Day(s)
20 Day(s)
-
You can add up to 6 items per a category to the compare list.
Hexagonal Shaft Tap (for Through Hole)【1-3 Pieces Per Package】
ONISHI MANUFACTURING
From: 228,784 VND Days to Ship: Số ngày giao hàng: 9 Day(s)
9 Day(s)
-
You can add up to 6 items per a category to the compare list.
From: 597,018 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Pg Conduit Thread Tap (German Standard)
SKC
It can be easily used by anyone, reduces precious production time to the minimum and improves work efficiency
From: 2,264,998 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Spiral Fluted Taps for Stainless Steels, Through Hole Use（with LH Spiral Flutes）_SU+SL
YAMAWA MFG
A tap suitable for machining through holes, including viscous materials that have a high machining hardness such as stainless steel, chrome steel, and molybdenum steel.[Features]· Achieves a tool life triple or more that of SU-PO for SUS304.· Provides excellent finish and thread shape to female thread flanks even after 2,000 drilling.· By adopting inverse twisted spiral groove, the discharge of chips is improved and tool life is improved compared to SU-PO.[Applications]· Can process both synchronously and asynchronously.· Recommended for machining speeds of 5 to 15 m/min (completely synchronous feeding recommended for speeds of 15 m/min or higher).
From: 233,112 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
From: 717,358 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Long Shank Spiral Pointed Taps, Coated_LS-PO-V
YAMAWA MFG
* LS-N-PO-V will switch to LS-PO-V as soon as the stock runs out.
From: 693,748 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Hand Taps for Taper Pipe Threads Short (ℓg) Type_S-PT
YAMAWA MFG
A cutting tap used for screw tapping in connecting pipes and pipe parts where the main purpose is mechanical connection. Can be used for machining tapered threads requiring durability such as water pipes and gas pipes
From: 502,618 VND Days to Ship: Số ngày giao hàng: 9 Day(s)
9 Day(s)
-
You can add up to 6 items per a category to the compare list.
Hand Taps for Taper Pipe Threads, Short (ℓg) Type, for Cast Irons_FC-S-PT
YAMAWA MFG
A tap suitable for thread machining of hard and brittle material such as cast iron.
From: 796,143 VND Days to Ship: Số ngày giao hàng: 9 Day(s) or more
9 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Long Shank Hand Taps for Taper Pipe Threads Long (ℓg) Type_LS-PT
YAMAWA MFG
For standard pipe taps, it is used when the protruding length of the screw is insufficient.
From: 831,600 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Spiral Fluted Taps for Tough Stainless Steels_SU2-SP
YAMAWA MFG
Ideal for pilot hole drilling of difficult-to-cut stainless steel such as SUS316 and SUS317.
From: 199,650 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
HOZAN
A reliable tap wrench for stable tapping.[Features]· A standard tap handle.[Applications]· Convenient for drilling work.
From: 375,340 VND Days to Ship: Số ngày giao hàng: 9 Day(s)
9 Day(s)
-
You can add up to 6 items per a category to the compare list.
From: 1,033,614 VND Days to Ship: Số ngày giao hàng: 6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
OSG KOREA CORP
From: 392,550 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
OSG KOREA CORP
From: 1,051,879 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
RUKO
[Features]· Hexagonal shaft shank design enables mounting to cordless screwdriver.· Enables hole punching and thread cutting work in iron plate, etc., without having to replace the drill.[Applications]· For drilling and creating/repairing screw threads.· Work materials: Iron, aluminum, copper.
From: 685,440 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Hexagonal Shank Tapping Drill (TiN Coating)
RUKO
[Features]· Hexagonal shaft shank design enables mounting to cordless screwdriver.· Enables hole punching and thread cutting work in iron plate, etc., without having to replace the drill.[Applications]· For drilling and creating/repairing screw threads.· Work materials: Iron, aluminum, copper, stainless steel.
From: 1,025,888 VND Days to Ship: Số ngày giao hàng: 9 Day(s)
9 Day(s)
-
You can add up to 6 items per a category to the compare list.
YAMAWA MFG
[Features]· Solid die with improved die runout precision. · High-speed tool steel (HSS) is adopted, realizing stable machining.[Applications]· Work material: Iron, light metals.· For male thread machining.
From: 1,216,068 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
NACHI(FUJIKOSHI)
[Features]・ A tap for through-holes, supporting various cutting speeds, machinery, and work materials.
From: 504,001 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
From: 170,834 VND Days to Ship: Số ngày giao hàng: 10 Day(s)
10 Day(s)
-
You can add up to 6 items per a category to the compare list.
TAEHWA TOOLS
From: 1,007,122 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Hand Taps for Cast Irons_FC-HT
YAMAWA MFG
[Features]· Suitable for thread machining with brittle and hard materials such as cast iron, designed appropriately oversized to handle rapid wear.
From: 148,170 VND Days to Ship: Số ngày giao hàng: 9 Day(s) or more
9 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Spiral Pointed Taps for General Purpose_IPO
YAMAWA MFG
[Features]· Through-hole tap for low speed machining with a drilling machine.· Use for machining iron products (SPC, SS400, etc.) that are commonly available.· Has a surface treatment (oxide treated) that is ideal for machining iron.· Machines small amounts of female threads for product prototypes.· The biting part has a twisted groove to discharge scrap in the same direction as bit movement, for use with through holes.
From: 196,210 VND Days to Ship: Số ngày giao hàng: 9 Day(s)
9 Day(s)
-
You can add up to 6 items per a category to the compare list.
Hand Taps for Automobile Tire Valve Threads_HT-TV
YAMAWA MFG
[Features]· Tap for vehicle tire valve screw threading.
From: 730,480 VND Days to Ship: Số ngày giao hàng: 30 Day(s)
30 Day(s)
-
You can add up to 6 items per a category to the compare list.
Check Pins for Bored Hole in Thread Form Tapping (Straight Type)_CPR-S
YAMAWA MFG
[Features]· (Straight type) Roll tap check pin that can be used to check several types of pilot hole diameters and pilot hole depth.· High-speed tool steel is used out of consideration for abrasion resistance.· Can be used for blind holes.
From: 538,088 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Z-PRO Coated Spiral Fluted Taps for Taper Pipe Threads_AUSP-Rc
YAMAWA MFG
[Features]· Secures an appropriate tool projection length and achieves good scrap discharging.· Adopts a unique blade shape and special coating that achieves good female thread touch and a long tool life.
From: 774,840 VND Days to Ship: Số ngày giao hàng: 9 Day(s)
9 Day(s)
-
You can add up to 6 items per a category to the compare list.
A Spiral Flute Left Hand Trapezoidal Thread Tap Spiral Tap_SL-LH-Tr
YAMAWA MFG
[Features]· The angle of the thread crest is 30°.· The symbol used for the thread is represented by "Tr."
From: 11,002,378 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Hyper Z Spiral Tap For Stainless Steel
NACHI(FUJIKOSHI)
[Features] · High performance tap for stainless steel. Boasts a long tool life and minimized inconsistencies.
From: 315,500 VND Days to Ship: Số ngày giao hàng: 10 Day(s)
10 Day(s)
-
You can add up to 6 items per a category to the compare list.
Long Shank for Taflet Steel TFSTL
NACHI(FUJIKOSHI)
A roll type tap that does not expel chips.[Features]· The TAFLET series uses workpiece plastic fluidity to raise screw threads and create female threads.[Applications]· Ideal for roll threaded screw machining of mild steel and stainless steel with hardness of 20 HRC or less.· For standard dimensions, it is convenient when the protrusion length is insufficient.
From: 455,602 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Fluteless (Nu-Roll) Insert Screw Thread Tap for Non-Ferrous Metals with Long Shank_HL-LT-B-NRT
OSG
Aluminum (casting, rolling, forged alloy) and other light alloys suitable for countermeasures against cutting chip damage or for extending the lifespan of taps.
From: 1,296,273 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Spiral Tap with Oil Holes OIL-SFT
OSG
Effective for horizontal blind holes and deep hole machining. The lubrication holes allow the cutting oil to act on the cutting edge, enabling high-speed, high-precision tapping.
From: 1,144,121 VND Days to Ship: Số ngày giao hàng: 20 Day(s)
20 Day(s)
-
You can add up to 6 items per a category to the compare list.
Pointed Tap Series With Oil Hole OIL-POT
OSG
Effective for sideways machining of through holes and deep holes. The cutting oil acts on the cutting edge through the oil hole, enabling high-speed and high-precision tapping
From: 3,617,026 VND Days to Ship: Số ngày giao hàng: 20 Day(s)
20 Day(s)
-
You can add up to 6 items per a category to the compare list.
Taper Tap for Pipes Spiral Tap, Long Shank LT-SFT-TPT
OSG
It is used to machine female tapered pipe threads, and it is suitable for blind holes and machining conditions where cutting chip clogging is likely to occur.
From: 1,255,365 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Spiral Taper Pipe Thread Tap (Short Thread)_SFT-S-TPT
OSG
It is used to machine female tapered pipe threads, and it is suitable for blind holes and machining conditions where cutting chip clogging is likely to occur.
From: 810,336 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Taper Tap for Pipes General Use Short Screw, Long Shank LT-S-TPT
OSG
Used to machine female tapered pipe threads. Long screw type mainly used for connecting pipe-shaped products
From: 1,443,333 VND Days to Ship: Số ngày giao hàng: Quote
Quote
-
You can add up to 6 items per a category to the compare list.
Taper Pipe Thread Tap for General Application (with OX, Short Thread)_H-S-TPT
OSG
Used to machine female tapered pipe threads. Short screw type used for tapping of short thread section such as elbows and teeth
From: 734,111 VND Days to Ship: Số ngày giao hàng: 20 Day(s)
20 Day(s)
-
You can add up to 6 items per a category to the compare list.
Parallel Taper Tap for Pipes Spiral Tap SFT-SPT
OSG
A spiral shape type is available for the blind hole according to the workpiece shape.
From: 726,288 VND Days to Ship: Số ngày giao hàng: 20 Day(s)
20 Day(s)
| BrandNhãn hiệu |
|---|
| Product SeriesDòng sản phẩm |
| From |
| Days to ShipSố ngày giao hàng |
| Screw size (Nominal) |
| Screw Types |
| work material |
| Pitch (P), Number of Threading(mm) |
| Tool Material Type |
| Tap Type |
| Hole type |
| Chamfer threads (Lcf) |
| Coating Type |
| Coating Y/N |
| Overall Length (L)(mm) |
You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | |
| BrandNhãn hiệu | NACHI(FUJIKOSHI) | OSG | OSG | OSG | OSG | OSG | OSG | ONISHI MANUFACTURING | TANOI MFG | SKC | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | HOZAN | YG 1 | OSG KOREA CORP | ＳＵＰＥＲＴＯＯＬ | OSG KOREA CORP | ＳＵＰＥＲＴＯＯＬ | RUKO | RUKO | YAMAWA MFG | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | TAEHWA TOOLS | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG |
| Product SeriesDòng sản phẩm | Taper Tap for Pipes Spiral Tap, Long Shank Short Screw LT-SFT-S-TPT | Taper Pipe Thread Tap for General Application (with OX)_H-TPT | Grooveless Tap Series V Coating, Long Shank for Deep Holes V-LT-DH-NRT | Hexagonal Shaft Tap (for Through Hole)【1-3 Pieces Per Package】 | Spiral Fluted Taps for Stainless Steels, Through Hole Use（with LH Spiral Flutes）_SU+SL | Hand Taps for Taper Pipe Threads, Short (ℓg) Type, for Cast Irons_FC-S-PT | Long Shank Hand Taps for Taper Pipe Threads Long (ℓg) Type_LS-PT | Check Pins for Bored Hole in Thread Form Tapping (Straight Type)_CPR-S | Z-PRO Coated Spiral Fluted Taps for Taper Pipe Threads_AUSP-Rc | A Spiral Flute Left Hand Trapezoidal Thread Tap Spiral Tap_SL-LH-Tr | Fluteless (Nu-Roll) Insert Screw Thread Tap for Non-Ferrous Metals with Long Shank_HL-LT-B-NRT | Taper Tap for Pipes General Use Short Screw, Long Shank LT-S-TPT | Taper Pipe Thread Tap for General Application (with OX, Short Thread)_H-S-TPT | ||||||||||||||||||||||||||||||||
| From | 355,865 VND | 360,800 VND | 1,303,463 VND | 1,773,333 VND | 605,306 VND | 1,501,363 VND | 966,785 VND | 228,784 VND | 597,018 VND | 2,264,998 VND | 233,112 VND | 717,358 VND | 693,748 VND | 502,618 VND | 796,143 VND | 831,600 VND | 199,650 VND | 375,340 VND | 1,033,614 VND | 392,550 VND | 1,051,879 VND | 685,440 VND | 1,025,888 VND | 1,216,068 VND | 504,001 VND | 170,834 VND | 1,007,122 VND | 148,170 VND | 196,210 VND | 730,480 VND | 538,088 VND | 774,840 VND | 11,002,378 VND | 315,500 VND | 455,602 VND | 1,296,273 VND | 1,144,121 VND | 3,617,026 VND | 1,255,365 VND | 810,336 VND | 1,443,333 VND | 734,111 VND | 726,288 VND | ||
| Days to ShipSố ngày giao hàng | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 21 Day(s) | 20 Day(s) | 20 Day(s) | 20 Day(s) | 9 Day(s) | 6 Day(s) or more | 6 Day(s) or more | 4 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 9 Day(s) | 9 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 9 Day(s) | 6 Day(s) | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 6 Day(s) or more | 9 Day(s) | 6 Day(s) or more | 6 Day(s) or more | 10 Day(s) | 4 Day(s) or more | 9 Day(s) or more | 9 Day(s) | 30 Day(s) | 6 Day(s) or more | 9 Day(s) | 6 Day(s) or more | 10 Day(s) | 6 Day(s) or more | 6 Day(s) or more | 20 Day(s) | 20 Day(s) | 6 Day(s) or more | 6 Day(s) or more | Quote | 20 Day(s) | 20 Day(s) |
| Screw size (Nominal) | M1.4 ～ M10 | No.10UN ～ M12 | R1/2 ～ R3/8 | R1/4 | R1/8 ～ R1/16 | PF1/4 | M4 ～ M5 | M3 ～ M4 | M1 ～ M10 | PG7 ～ PG42 | M3 ～ M6 | M2.3 ～ M30 | M3 ～ M12 | 1/2-14 ～ 3/8-19 | 1/2-14 ～ 3/8-19 | 1 ～ 3/8 | M3 ～ M24 | - | PF 3/4 ～ PF 3/8 | PF1 ～ PF3/8 | PT 1" ～ PT 3/8 | PT1 ～ PT3/8 | M4 ～ M48 | M3 ～ M10 | M3 ～ M10 | No.6 ～ UNC1/4 | M1.4 ～ M24 | M2 ～ M12 | 1 ～ 27 | M3 ～ M18 | M3 ～ M10 | 9 | No.10 ～ M12 | 1/8 | Tr 10 ～ Tr 30 | M6 ～ M12 | M3 ～ M10 | M8 | M10 | M20 | R1/2 ～ R3/8 | R1 ～ R3/8 | R1 ～ R3/8 | R1/4 ～ R1/16 | R1/4 |
| Screw Types | Meter | Meter / unified | Taper for Pipe | Taper for Pipe | Taper for Pipe | Parallel for Pipes | Meter | Meter | Meter | Other | Meter | Meter | Meter | Taper for Pipe | Taper for Pipe | Taper for Pipe | Meter | Meter | Parallel for Pipes | Parallel for Pipes | Taper for Pipe | Taper for Pipe | Meter | Meter | Meter | unified | Meter | Meter | - | Meter | Meter | Other | Meter / unified | Other | Trapezoid | Meter | Meter | Meter | Meter | Meter | Taper for Pipe | Taper for Pipe | Taper for Pipe | Taper for Pipe | Parallel for Pipes |
| work material | Copper (Cu)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] | Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[◎] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Magnesium Alloy (MC)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Steel casting (SC)[○] / Copper (Cu)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / Alloy Steel (SCM)[◎] / Steel casting (SC)[◎] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎] | Steel casting (SC)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Steel casting (SC)[○] | - | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Nickel-based alloy (Inconel, etc.)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | - | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Magnesium Alloy (MC)[○] | - | Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] | Stainless steel (SUS)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] | - | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Copper (Cu)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] | - | Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] | - | - | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[◎] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[○] | Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[◎] / Steel casting (SC)[◎] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[◎] / Steel casting (SC)[◎] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Magnesium Alloy (MC)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Magnesium Alloy (MC)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Steel casting (SC)[○] / Copper (Cu)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / Alloy Steel (SCM)[◎] / Steel casting (SC)[◎] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] |
| Pitch (P), Number of Threading(mm) | 0.3 ～ 1.5 | 1.75 ～ 32 | 14 ～ 28 | 19 | 28 | 19 | 0.7 ～ 0.8 | 0.5 ～ 0.7 | 0.2 ～ 1.5 | 16 ～ 20 | 0.5 ～ 1 | 0.4 ～ 3.5 | 0.5 ～ 1.75 | - | - | 11 ～ 28 | 0.5 ～ 3 | - | 14 ～ 19 | 11 ～ 28 | 11 ～ 28 | 11 ～ 28 | 0.5 ～ 5 | 0.5 ～ 1.5 | 0.5 ～ 1.5 | 20 ～ 32 | 0.25 ～ 3 | 0.4 ～ 1.75 | 1 ～ 13 | 0.5 ～ 2 | 0.5 ～ 1.5 | 1 | 0.4 ～ 64 | 28 | 2 ～ 6 | 1 ～ 1.75 | 0.5 ～ 1.5 | 1.25 | 1.5 | 2.5 | 14 ～ 28 | 11 ～ 28 | 11 ～ 28 | 19 ～ 28 | 19 |
| Tool Material Type | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel |
| Tap Type | Roll tap | Hand Tap | Tap for pipes | Tap for pipes | Tap for pipes | Tap for pipes | Roll tap | Thread-cutting-related tool | Roll tap | Tap for pipes | Spiral Tap | Point tap | Point tap | Tap for pipes | Tap for pipes | Tap for pipes | Spiral Tap | Tap wrench | Tap for pipes | Tap for pipes | Spiral Tap | Tap for pipes | Spiral Tap | Hand Tap | Hand Tap | Die | Point tap | Point tap | Hand Tap | Hand Tap | Point tap | Hand Tap | Thread-cutting-related tool | Spiral Tap | Spiral Tap | Spiral Tap | Roll tap | Roll tap | Spiral Tap | Point tap | Tap for pipes | Tap for pipes | Tap for pipes | Tap for pipes | Tap for pipes |
| Hole type | For through hole / For blind hole | For through hole / For blind hole | For blind hole | For through hole / For blind hole | For through hole / For blind hole | For blind hole | For blind hole | For through hole | - | - | For through hole | For through hole | For through hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For blind hole | For through hole / For blind hole | For blind hole | - | - | - | - | For through hole / For blind hole | For through hole / For blind hole | - | For through hole | For through hole | - | For through hole / For blind hole | For through hole | - | For blind hole | - | For through hole | For through hole / For blind hole | For blind hole | For through hole / For blind hole | For blind hole | For through hole | For blind hole | For blind hole | For through hole / For blind hole | For through hole / For blind hole | - |
| Chamfer threads (Lcf) | 2P ～ 4P | 1.5P ～ 5P | 2.5P | 2.5P | 2.5P | 2.5P | 2P | - | 1P ～ 4P | - | 5P | 24P ～ 31P | 5P | 2.5P | 2.5P | 2.5P | 3P | - | 3.5 | 4 | - | 2.5P | - | - | - | - | 5 | 5 | - | 1.5P ～ 5P | 5P | 1.5P | - | 2.5P | 22P ～ 30P | 2.5 | 2P | 2P | 2.5P | 4P | 2.5P | 2.5P | 2.5P | 2.5P | 2.5P |
| Coating Type | - | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | TiCN | Non-Coated | TiCN | - | - | - | TiN | - | - | - | - | - | - | - | Homo | - | Homo | Non-Coated | TiN | - | TiCN | Non-Coated | - | Nitriding Treatment | Other | Non-Coated | Non-Coated | Other | - | Non-Coated | - | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated |
| Coating Y/N | NA | NA | NA | NA | NA | NA | Available | NA | Available | - | NA | NA | Available | NA | NA | NA | NA | NA | NA | NA | Available | NA | Available | NA | Available | NA | Available | NA | - | Available | Available | NA | NA | Available | NA | NA | NA | Available | NA | NA | NA | NA | NA | NA | NA |
| Overall Length (L)(mm) | 34 ～ 75 | 60 ～ 90 | 100 ～ 150 | 62 | 55 | 150 | 120 | 70 ～ 70/70/70 | 30 ～ 75 | 85 ～ 135 | 46 ～ 62 | 80 ～ 300 | 100 ～ 150 | 55 ～ 85 | 55 ～ 85 | 100 ～ 200 | 46 ～ 120 | 210 | 65 ～ 85 | 55 ～ 95 | 55 ～ 105 | 55 ～ 95 | 52 ～ 185 | 51 ～ 75 | 51 ～ 75 | - | 34 ～ 120 | 40 ～ 82 | - | 46 ～ 100 | 46 ～ 75 | 75 | 41.5 ～ 121 | 90 | 160 ～ 300 | 62 ～ 82 | 70 ～ 150 | 150 | 120 | 150 | 100 ～ 150 | 55 ～ 95 | 100 ～ 150 | 55 ～ 62 | 62 |
Loading...Tải…
ConfigureTạo
Specification/DimensionsĐặc điểm kỹ thuật / Kích thướcĐặc điểm kỹ thuật / Kích thước
-
Screw size (Nominal)
- CTG-54
- CTG-42
- CTG-36
- CTG-28
- CTG-22
- CTG-16
- PT-1-11
- NPT-1-11-1-2
- PT-1-1-2-11
- No.0
- No.0UN
- NO.0-80UNF
- No.10
- No.1
- No.1UN
- No.10UN
- S0.1
- NO.1-72UNF
- NO.1-64UNC
- NO.10-32UNF
- No.10-32UNF
- NO.10-24UNC
- No.10-24UNC
- No.12
- No.12UN
- NO.12-28UNF
- No.12-28UNF
- NO.12-24UNC
- No.12-24UNC
- No.2
- No.2UN
- S0.2
- NO.2-64UNF
- No.2-64UNF
- NO.2-56UNC
- No.2-56UNC
- No.3
- No.3UN
- S0.3
- NO.3-56UNF
- No.3-56UNF
- NO.3-48UNC
- No.3-48UNC
- No.4
- No.4UN
- S0.4
- NO.4-48UNF
- No.4-48UNF
- NO.4-40UNC
- No.4-40UNC
- No.5
- No.5UN
- S0.5
- NO.5-44UNF
- No.5-44UNF
- NO.5-40UNC
- No.5-40UNC
- 0.6
- No.6
- No.6UN
- S0.6
- NO.6-40UNF
- No.6-32UNC
- S0.7
- No.8
- No.8UN
- S0.8
- NO.8-36UNF
- No.8-36UNF
- NO.8-32UNC
- No.8-32UNC
- S0.9
- 1
- 1"
- 1UN
- 1UNS
- G1
- M1
- NPS1
- NPT1
- NPT 1"
- NPTF1
- PF1
- PF 1
- PF 1"
- PS 1
- PS 1"
- PT1
- PT1"
- PT 1
- PT 1"
- R1
- Rp1
- S1
- UNC1
- UNF1
- W1
- 1"-12
- 1'-11.5
- 1'-11
- PF1-11
- PT1-11
- 1-8UNC
- 1"-8
- 1"-8UNC
- PS1-1/2
- PS1-1/4
- 1 1/2
- 1"1/2UN
- G1"1/2
- NPS1"1/2
- NPT1"1/2
- NPT 1"1/2
- PF 1"1/2
- PT1"1/2
- PT 1 1/2
- R1"1/2
- W1"1/2
- 1'1/2-11
- 1 1/2-8UN
- 1 1/4
- 1"1/4UN
- G1"1/4
- NPS1"1/4
- NPT1"1/4
- PF 1"1/4
- PT1"1/4
- PT 1 1/4
- PT 1"1/4
- R1"1/4
- W1"1/4
- 1'1/4-11.5
- 1'1/4-11
- 1 1/4-8UN
- 1 1/8
- 1"1/8UN
- G1"1/8
- R1"1/8
- W1"1/8
- 1'1/8-11
- 1 1/8-8UN
- 1 1/16
- 1"1/16UN
- 1/2
- 1/2UN
- G1/2
- NPS1/2
- NPT1/2
- NPT 1/2
- NPTF1/2
- PF1/2
- PF 1/2
- PS1/2
- PS 1/2
- PT1/2
- PT 1/2
- R1/2
- Rc1/2
- Rp1/2
- UNC1/2
- UNF1/2
- W1/2
- 1/2-20
- 1/2-20UNF
- 1/2-14
- PF1/2-14
- PT1/2-14
- 1/2-13
- 1/2-13UNC
- 1/2-12
- 1/2-12W
- 1/2(1/16'-1/2)
- 1/2W12
- 1/2 - 13
- 1/2 - 20
- 1 3/4
- 1"3/4UN
- G1"3/4
- R1"3/4
- W1"3/4
- 1'3/4-11
- 1 3/4-8UN
- 1"3/4-5UNC
- 1 3/8
- 1"3/8UN
- G1"3/8
- R1"3/8
- W1"3/8
- 1 3/8-8UN
- 1/4
- 1/4UN
- 1/4UNJ
- G1/4
- NPS1/4
- NPT1/4
- NPT 1/4
- NPTF1/4
- PF1/4
- PF 1/4
- PS1/4
- PS 1/4
- PT1/4
- PT 1/4
- R1/4
- Rc1/4
- Rp1/4
- SM1/4
- UNC1/4
- UNF1/4
- W1/4
- 1/4-28
- 1/4-28UNF
- 1/4-20
- 1/4-20UNC
- 1/4-19
- PF1/4-19
- PT1/4-19
- 1/4-18
- 1/4(1/16'-1/4)
- 1/4 - 20
- 1/4W20
- 1 5/8
- W1"5/8
- 1 5/8-8UN
- M1 to 6
- W1"7/8
- 1 7/8-8UN
- 1" - 8
- 1'W8
- 1/8
- G1/8
- NPS1/8
- NPT1/8
- NPT 1/8
- NPTF1/8
- PF1/8
- PF 1/8
- PS1/8
- PS 1/8
- PT1/8
- PT 1/8
- R1/8
- Rc1/8
- Rp1/8
- SM1/8
- W1/8
- 1/8-40W
- 1/8-28
- PF1/8-28
- PT1/8-28
- 1/8-27
- 1/8-18
- M1 to 10
- 1 12
- 1" - 12
- 1" - 14
- 1/16
- G1/16
- NPS1/16
- NPT1/16
- NPT 1/16
- PT1/16
- PT 1/16
- R1/16
- 1/16-28
- 1/16-27
- 1 20
- M1.1
- M1.2
- S1.2
- 1.25
- M1.4
- S1.4
- 1.5
- M1.6
- M1.7
- M1.8
- 2
- 2UN
- G2
- M2
- M2.0
- NPS2
- NPT2
- NPT 2"
- PF 2"
- PS 2
- PS 2"
- PT2"
- PT 2
- PT 2"
- R2
- W2
- NO 2-56
- 2'-11.5
- 2'-11
- 2-8UN
- W2"1/4
- 2'1/4-11
- 2~2.5
- 2 4.5
- M2 to 4.5
- M2.2
- M 2.2
- M2.3
- M2.5
- M2.6
- 3
- 3M
- M3
- M3.0
- M 3
- M 3.0
- STI M3
- PS3-8-19
- NPT3-8-18
- 3/4
- 3/4UN
- G3/4
- NPS3/4
- NPT3/4
- NPT 3/4
- NPTF3/4
- PF3/4
- PF 3/4
- PS 3/4
- PT3/4
- PT 3/4
- R3/4
- Rp3/4
- UNC3/4
- UNF3/4
- W3/4
- 3/4-16
- 3/4-16UNF
- 3/4-14
- PF3/4-14
- PT3/4-14
- 3/4-10
- 3/4-10UNC
- 3/4 - 10
- 3/4W10
- 3/4 - 16
- 3/8
- 3/8-UNJ
- 3/8UN
- G3/8
- NPS3/8
- NPT3/8
- NPT 3/8
- NPTF3/8
- PF3/8
- PF 3/8
- PS3/8
- PS 3/8
- PT3/8
- PT 3/8
- R3/8
- Rc3/8
- Rp3/8
- UNC3/8
- UNF3/8
- W3/8
- 3/8-24
- 3/8-24UNF
- 3/8-19
- PF3/8-19
- PT3/8-19
- 3/8-18
- 3/8-16
- 3/8-16UNC
- 3/8 - 16
- 3/8W16
- 3/8 - 24
- 3~10
- M3 to 10
- 3/16
- SM3/16
- W3/16
- 3/16-32SM
- 3/16-24W
- 3/32
- SM3/32
- # 3 - 48
- # 3 - 56
- 3.5
- M3.5
- M3.5
- 4
- 4M
- M4
- M4.0
- M 4
- M 4.0
- STI M4
- NO 4-40
- M4 to 6
- M4 to 13
- # 4 - 40
- # 4 - 48
- M4.5
- M4.5
- 5
- 5M
- M5
- M5.0
- M5
- M 5
- M 5.0
- STI M5
- 5/8
- 5/8UN
- G5/8
- NPS5/8
- PT5/8
- R5/8
- UNC5/8
- UNF5/8
- W5/8
- 5/8-18
- 5/8-18UNF
- 5/8-14
- 5/8-11
- 5/8-11UNC
- 5/8 - 11
- 5/8W11
- 5/8 - 18
- M5 to 10
- M5-M12
- M5 to 13
- 5/16
- 5/16UN
- 5/16UNJ
- UNC5/16
- UNF5/16
- W5/16
- 5/16-24
- 5/16-24UNF
- 5/16-18
- 5/16-18UNC
- 5/16 - 18
- 5/16W18
- 5/16 - 24
- 5/32
- W5/32
- 5/32-36 UNC
- 5/32-32W
- # 5 - 40
- 5.5M
- M5.5
- M5.5
- 6
- M6
- M6.0
- M 6
- M 6.0
- STI M6
- No6-40UNF
- 6-32UNC
- NO 6-32
- M6 to 20
- # 6 - 32
- # 6 - 40
- M7
- M7.0
- M7
- M 7.0
- PG7
- 7/8
- 7/8UN
- G7/8
- NPS7/8
- PT7/8
- R7/8
- UNC7/8
- UNF7/8
- W7/8
- 7/8-14
- 7/8-14UNF
- 7/8-9
- 7/8-9UNC
- 7/8- 9
- 7/8W9
- 7/8- 14
- 7/16
- 7/16UN
- UNC7/16
- UNF7/16
- W7/16
- 7/16-20
- 7/16-20UNF
- 7/16-14UNC
- 7/16 - 14
- 7/16W14
- 7/16 - 20
- 7/32
- SM7/32
- 7/32-24W
- 7/64
- 7.5
- 8
- #8
- M8
- M8.0
- M 8.0
- STI M8
- TV8
- 8-32UNC
- NO 8-32
- # 8 - 32
- # 8 - 36
- 9
- M9
- M9
- PG9
- 9/16
- 9/16UN
- UNF9/16
- W9/16
- 9/16-18
- 9/16-18UNF
- 9/16-12
- 9/16-12UNC
- 9/16 - 12
- 9/16 - 18
- SM9/32
- 9/64
- SM9/64
- 10
- M10
- M10.0
- M10
- STI M10
- Tr 10
- 10-32UNF
- NO 10-32
- NO 10-24
- M10 to 13
- #10 - 24
- M10 to 25
- #10 - 32
- M11
- M11
- PG11
- 11/2
- NPT 11/2
- PF 11/2
- PS 11/2
- PT 11/2
- 11/4
- NPT 11/4
- PF 11/4
- PS 11/4
- PT 11/4
- 11/8
- 11/16
- 11~24
- SM11/32
- 11/64
- SM11/64
- 12
- M12
- M12.0
- M12
- STI M12
- Tr 12
- 12-1.0-2
- #12 - 24
- M13
- 13/4
- 13/8
- 13/16
- 13/32
- PG13.5
- 14
- M14
- M14.0
- M14
- Tr 14
- M15
- 15/8
- 15/64
- SM15/64
- 16
- M16
- M16.0
- M16
- PG16
- Tr 16
- M17
- 17/8
- 17/16
- 17/32
- 17/64
- 18
- M18
- M18.0
- M18
- Tr 18
- M19
- M19 to 32
- M19 to 38
- 20
- M20
- M20.0
- M20
- Tr 20
- M21
- PG21
- 22
- M22
- M22.0
- M22
- M22X
- Tr 22
- 22-1.0
- M23
- 24
- M24
- M24.0
- M24
- M24X
- Tr 24
- 24-2.0-2
- 25
- M25
- M25X
- Tr 25
- M25 to 50
- M25 to 70
- M26
- Tr 26
- 27
- M27
- M27.0
- 27~36
- M28
- Tr 28
- PG29
- 30
- M30
- M30.0
- Tr 30
- M32
- 33
- M33
- M34
- M35
- 36
- M36
- PG36
- M38
- 39
- M39
- M40
- 42
- M42
- PG42
- M44
- 45
- M45
- M48
- M50
- M56
- M64
- 1015
- 1020N100M
- 1020N150M
- 06510X28R
- 10154
- 12204
- 12254N100M
- 12254N150M
- 12254N200M
- 16304N100M
- 16304N150M
- 16304N200M
- 16304N250M
- 20305
- 20505N100M
- 20505N150M
- 20505N200M
- 20505N300M
- 20505N350M
- 25506N100M
- 25506N150M
- 25506N200M
- 25506N300M
- 25506N350M
- 32506
- 32506N150M
- 32506N200M
- 32506N300M
- 035083N075M
- 035083N080M
- 040123N100M
- 060163N050M
- 060163N100M
- 060163N125M
- 065103X28G
- 075203N125M
- 075203N150M
- 080153X19G
- 080153X19R
- 080203N050M
- 080203N100M
- 090244N125M
- 090244N175M
- 100254N050M
- 100254N100M
- 100254N150M
- 100254N200M
- 120204X14G
- 120204X14R
- 120304N100M
- 120304N150M
- 120304N200M
- 160264X11G
- 160264X11R
- 160404N150M
- 160404N200M
- 160404N250M
- 200305X11G
- 200305X11R
- 200505N150M
- 200505N200M
- 200505N300M
-
Screw Types
- Meter
- unified
- Whitworth
- Sewing Machine
- Taper for Pipe
- Parallel for Pipes
- Trapezoid
- Miniature
- Other
-
work material
- Low-Carbon Steel (carbon alloy less than 0.25%)
- Medium carbon steel (carbon content 0.25 to 0.45%)
- High Carbon Steel (C with a content over 0.45%)
- Alloy Steel (SCM)
- Stainless steel (SUS)
- Quenched and tempered steel (25 to 35 HRC)
- Quenched and tempered steel (35 to 45 HRC)
- Quenched and tempered steel (45 to 55 HRC)
- High Hardness Steel (50-60 HRC)
- Tool Steel (Before SKD Hardening)
- Steel casting (SC)
- Cast Iron (FC)
- Ductile Cast Iron (FCD)
- Copper (Cu)
- Brass (Bs)
- Brass cast iron (BsC)
- Bronze (Pb)
- Aluminum Rolled Material (AL)
- Aluminum Alloy Casting (AC, ADC)
- Magnesium Alloy (MC)
- Zinc Alloy Casting (ZDC)
- Titanium Alloy (Ti-6Al-4V, etc)
- Nickel-based alloy (Inconel, etc.)
- Thermosetting plastic (bakelite, phenol, etc.)
- Thermoplastic plastic (vinyl chloride, nylon, etc.)
-
Pitch (P), Number of Threading(mm)
- .02
- 0.025
- 0.05
- 0.08
- 0.1
- 0.125
- 0.15
- 0.175
- 0.2
- 0.225
- 0.25
- 0.3
- 0.35
- 0.4
- 0.45
- 0.5
- 0.6
- 0.7
- 0.75
- 0.75、1.00、1.25、1.50、1.75、2.00、2.50、3.00
- 0.8
- 0.9
- 1
- 1-1/8-7~1-1/26
- 1.2
- 1.25
- 1.5
- 1.7
- 1.75
- 2
- 2-56~8-32
- 2.5
- 3
- 3/8-16~1-8
- 3.5
- 4
- 4 1/2 UNC
- 4.5
- 5
- 5 UNC
- 5.5
- 6
- 6 UNC
- 7
- 7 UNC
- 8
- 8 UNC
- 8 UNS
- 8DØ
- 8J UNS
- 9
- 9 UNC
- 10
- 10 UNC
- 10-24~5/16-18
- 10、11、12、14、16、18、20、24F
- 11
- 11 UNC
- 11 1/2
- 11 1/2DØ
- 11.5
- 12
- 12 UNF
- 12 UNS
- 13
- 13 UNC
- 14
- 14 UNC
- 14 UNF
- 14 UNS
- 14DØ
- 16
- 16 UNC
- 16 UNF
- 16UNC
- 18
- 18 UNC
- 18 UNF
- 18DØ
- 19
- 20
- 20 UNC
- 20 UNF
- 20UNC
- 24
- 24 UNF
- 27
- 27DØ
- 28
- 28 UNF
- 32
- 32UNC
- 36
- 40
- 44
- 48
- 56
- 64
- 72
- 80
- 150
-
Tool Material Type
- High-speed steel
- Cobalt HSS
- Powder high-speed steel
- Carbide
- Alloy HSS
- Vanadium High-Speed Steel
- SKS
-
Tap Type
-
Hole type
-
Chamfer threads (Lcf)
-
Coating Type
-
Coating Y/N
-
Overall Length (L)(mm)
Related Categories to Screw-Hole-Related ToolsDanh mục liên quan đến Screw-Hole-Related Tools
-
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
MISUMI Contact
TALK ID : Misumi_vn
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy