(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.
Tel: 0222-361-1555
Email: cs@misumi.com.vn
8:00 - 17:00 (Mon - Sat)
Search by Category / Brand Tìm theo danh mục, nhãn hiệu
Search by Category Tìm theo danh mục
- MISUMI Việt Nam đồng hành cùng Kỹ sư tương lai trong cuộc thi SMAE Award 2024. Xem chi tiết.
MISUMI Vietnam accompanies Future Engineers in the SMAE Award 2024 competition. See more.
Screw-Hole-Related Tools（Screw size (Nominal)：M10）
Search by specifying the lower class categoryTìm kiếm bằng cách chỉ định danh mục lớp thấp hơn
Hand Taps
Spiral Taps
Point Taps
Roll Taps
Taps for Pipes
Thread Cutters
Thread-Cutting-Related Tools
Dies
Tap Wrenches
Modification/Removal Tools
Brand |
|
|---|---|
| CAD |
|
| Days to Ship |
|
254 itemsMặt hàng
- Sort By
-
You can add up to 6 items per a category to the compare list.
Model A Tap Series, Spiral Tap A-SFT
OSG
Thanks to its stable chip ejection capability, it can be used with various materials, as well as a wide range of cutting regions and devices. A spiral tap with a spiral groove mainly used for blind holes.
- Volume Discount
From: 743,796 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more 
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Spiral Tap for General Application_EX-SFT
OSG
It is used for blind holes, and is suitable for work materials with continuous cutting chips in a coil shape in carbon steel, steel alloy, and non-ferrous metals.
From: 224,706 VND Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
Pointed Tap Series, General Purpose EX-POT
OSG
It is used for general purposes and is suitable for work materials in which cutting chips are continuously coiled in carbon steel, steel alloy and non-ferrous metals. The cutting chips are pushed forward reliably, so there is no risk of cutting chip damage.
From: 401,667 VND Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
YAMAWA MFG
The spiral flute tap is ideal for machining blind holes as cutting chip is discharged from the grooves twisted in the same direction as the threads.[Features]・ The grooves are twisted in the same direction as the threads for not only good scrap discharging performance but also great cutting performance.・ Intermittent cutting of female threads with keyway is also possible.・ Capable of machining both synchronously and asynchronously.・ Ideal for machining blind holds as the groove is twisted, continuous small coiled scraps are discharged to the rear, and it does not cause cutting chip clogging.・ Ideal for tapping especially sticky work materials, plastics, etc. due to its sharpness.・ The tap can easily cut.・ Intermittent cutting of pilot holes with keyway is also possible.・ Since the blade strength is inferior to HT, the HT shape is more suitable for hard materials.[Applications]・ Ideal for machining blind holes.
From: 284,460 VND Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
YAMAWA MFG
Hand tap used for general tapping work.[Features]・ High blade tip strength makes it easy for regrinding.・ More suitable for manual work compared to taps of other shapes.・ 2 types are available, with 5P or 1.5P chamfered threads.・ When machining a blind hole manually, finish machining with 1.5P is recommended after first machining with 5P.・ Machining with mechanical machinery is also possible.・ Has straight grooves out of consideration for cutting chip stow.・ Suitable for work materials whose cutting chips are powder or small coiled close to the powder.[Applications]・ Ideal for threading SPC/SPH and other thin plates or SS400/S20 or below mild steel.
From: 250,800 VND Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
OSG
High-speed steel hand tap.Work material: Magnesium alloy casting (MC) compatible / zinc alloy casting (ZDC) compatible
- Volume Discount
From: 348,333 VND Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
Fluteless (Nu-Roll) Tap TiN coated_TIN-NRT
OSG
Suitable for steel and non-ferrous alloys. High-speed cutting is possible, durability is greatly improved, and highly efficient tapping is possible.
From: 827,992 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
From: 400,608 VND Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
High-Speed Steel Hand Tap【10 Pieces Per Package】
MISUMI
[Features]·General-purpose uncoated type high-speed steel hand tap·High versatility, suitable for a variety of applications and work materials such as aluminum and general steel
- Volume Discount
From: 1,249,259 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
YAMAWA MFG
Solid die with improved die runout precision.[Features]· High-speed tool steel (HSS) is adopted, realizing stable machining.· The front surface is the surface with a marking on the chamfering.· The machining reference surface at the rear is set so that the end face makes close contact when the holder is attached.· Screw adjustments are not required and die outer diameter precision is improved compared to adjustable dies as this is a solid die.· Solves problems particular to adjustable type dies, realizing high precision screw machining.[Applications]· Convenient for cutting male threads on various work materials, whether hand turned or used with machinery.· Combining with NC tooling enables machining with a MC.
From: 1,111,795 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
From: 402,909 VND Days to Ship: Số ngày giao hàng: 5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
HSS Round Dies for Auto Lathe, for Stainless Steel_HS-D
YAMAWA MFG
Solid die for difficult-to-cut materials, such as stainless steel, etc.[Features]· Adopts high-speed tool steel (HSS).· Can be used only from the surface as oxide treatment (OX treatment) is applied as the surface treatment.· The outer diameter of the die is made smaller and thinner for less rotational vibration during high speed cutting with automatic lathes.· Stable male threading can be performed.· Solid type with minimal variation even under harsh cutting condition specifications.[Applications]· Optimal for machining stainless steel and other difficult-to-cut materials.
From: 1,406,511 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
CPM Fluteless (Nu-Roll) Tap V coated_VP-NRT
OSG
With powder metal high-speed steel and special thread specifications, long-lifespan machining is possible with a wide range of work materials.
From: 1,136,666 VND Days to Ship: Số ngày giao hàng: Quote
Quote
-
You can add up to 6 items per a category to the compare list.
YAMAWA MFG
[Features]· A long-shank spiral tap for through holes. For use in high-speed machining between 15 m/min and 25 m/min.
From: 1,497,843 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Spiral Tap for Stainless Steels_EX-SUS-SFT
OSG
Suitable for blind hole stainless steel, copper, and thermoplastic plastics. Also suitable for materials such as carbon steel and steel alloy.
From: 459,999 VND Days to Ship: Số ngày giao hàng: Quote
Quote
-
You can add up to 6 items per a category to the compare list.
Model A Tap Series, Pointed Tap A-POT
OSG
Thanks to its stable chip ejection capability, it can be used with various materials, as well as a wide range of cutting regions and devices. Point tap with point grooves used for through holes.
From: 776,666 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
From: 384,500 VND Days to Ship: Số ngày giao hàng: 45 Day(s)
45 Day(s)
-
You can add up to 6 items per a category to the compare list.
Fluteless Tap (X Performer)_S-XPF
OSG
There are no chipping problems compared to cutting taps for carbon steel and alloy steel, enabling long life machining. Especially useful for processing automotive forged steel parts.* M2.6 or below can be changed to powder HSS (CPM) at any time. We ask for your understanding in advance.
From: 1,142,485 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
MT Series High-Speed Steel Spiral Tap
MISUMI
[New Item] A universal tap that can accommodate a wide range of work materials from general steel to aluminum and stainless steel. The unique edge shape suppresses the collapse of the internal thread and eliminates the trouble of tapping. [Slide Discount] Great deals are available on the purchase of more than 5 pieces.
- Volume Discount
From: 371,378 VND Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
SBK
Days to Ship: Số ngày giao hàng: 5 Day(s) or more
5 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
OSG
Work material ideal for forging high carbon steel, tool steel, steel alloy, or blind hole drilling with a hardness of 20 to 35 HRC for tempering
From: 596,666 VND Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
Spiral Fluted Taps for Stainless Steels_SU+SP
YAMAWA MFG
Spiral tap for blind hole machining with extremely viscous or work-hardened work material.[Features]· For blind hole machining with extremely viscous or work-hardened work materials such as chrome steel, molybdenum steel, and stainless steel.· Optimal design of the screw part reduces the machining burden on each blade bite, reducing the cutting resistance and increasing tool life.· Stable scrap is ejected and a good finish is realized.· Capable of machining both synchronously and asynchronously.· Machining speed of 10 m/min or less is recommended.[Applications]Optimal for machining extremely viscous or work-hardened work material.
From: 389,150 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
YAMAWA MFG
A point tap convenient for through-hole machining as scraps are ejected forward.[Features]· Slanting the groove on the cutting edge of the biting part pushes the scraps forward.· Minimal scrap issues.· Low cutting torque.· Capable of machining both synchronously and asynchronously.[Applications]· Ideal for machining through-holes.* N-PO models will transition to PO as soon as stock runs out.
From: 302,213 VND Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
Spiral Fluted Taps, Coated, Through Hole Use（with LH Spiral Flutes）_AU+SL
YAMAWA MFG
A coated spiral tap for through holes that provides sufficient performance for synchronous/asynchronous machining and enables stable threading in the mid-speed range (10 to 25 m/min).
From: 694,223 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
From: 912,631 VND Days to Ship: Số ngày giao hàng: 6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
From: 993,806 VND Days to Ship: Số ngày giao hàng: 5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
Plus Series Spiral Fluted Taps,Optimum Coating for the Tapping_AU+SP
YAMAWA MFG
Coated spiral tap that can machine at medium to high speed for a wide range of work materials.[Features]· A special shape (BLF shape) is adopted for the thread component. Several threads are totally left untouched while the remaining half of the threads are chamfered.· Completely threaded to prevent the blade from chipping.· Reduction of friction resistance and tapping torque.· Maintains screw guidance (stable machining).· Maintains excellent chip discharge performance (smooth discharge).[Applications]· Supports machining of a wide range of work materials such as alloy steel, high carbon steel, medium carbon steel, low carbon steel, etc.· Ideal for water soluble cutting fluids.
From: 694,223 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
TiN Coated High-Speed Steel Point Tap【1-5 Pieces Per Package】
MISUMI
[Features]·Can be used for through hole machining·It can handle a wide range of work materials, but is especially effective for tapping steel alloy and stainless steel, etc.·Excellent abrasion resistance and chip-weld resistance due to TiN coating·Long shank type ideal for drilling deep thread holes (G-LS-POT)
- Volume Discount
From: 733,049 VND Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
Tungsten Carbide Straight Flutes Tap for Hardened Steels (50 HRC〜)_VX-OT
OSG
Ideal for tapping hardened steel (alloy steel, die steel, tool steel, etc.) of 50 HRC or higher
From: 5,235,000 VND Days to Ship: Số ngày giao hàng: Quote
Quote
-
You can add up to 6 items per a category to the compare list.
TRUSCO NAKAYAMA
[Features]· A spiral tap for general steel.[Applications]· For blind hole machining.· Work materials: General steel, low/medium carbon steel, alloy steel.
From: 469,743 VND Days to Ship: Số ngày giao hàng: Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Long Shank Spiral Fluted Taps_LS-SP
YAMAWA MFG
* LS-N-SP will switch to LS-SP as soon as the stock runs out.
From: 582,289 VND Days to Ship: Số ngày giao hàng: 8 Day(s) or more
8 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Spiral Tap with Long Shank_A-LT-SFT
OSG
It has stable cutting chip evacuation and can be used in various work materials and a wide range of cutting areas and machines. A spiral flute tap with a spiral groove that is mainly used for blind holes.
From: 1,106,667 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Pointed Tap for Stainless Steel use EX-SUS-POT
OSG
Used in the through hole of poorly machinable stainless steel, it shows excellent cutting performance and durability. In addition to stainless steel, it is also suitable for various heat resistant steels and strong nickel-chromium-manganese steel.
From: 444,999 VND Days to Ship: Số ngày giao hàng: 20 Day(s) or more
20 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Hand Taps for Stainless Steels_SU-HT
YAMAWA MFG
Hand tap suitable for machining extremely viscous or work-hardened work material.[Features]Optimal blade design is suitable for machining chrome steel, molybdenum steel, and stainless steel.· 2 types are available, with 4P or 1.5P biting threads, to suit the application used.· Capable of machining both synchronously and asynchronously.· Machining speed of 5 m/min or less is recommended.[Applications]Ideal for machining with extremely viscous or work-hardened work materials such as chrome steel, molybdenum steel, and stainless steel.
From: 412,075 VND Days to Ship: Số ngày giao hàng: 9 Day(s) or more
9 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Spiral Fluted Taps for Soft Structural Steels_E-SP
YAMAWA MFG
A revolutionary spiral tap that has completely eliminated the female screw enlargement problems typical of spiral taps, especially in tapping of mild steel (SS41, S25C, etc.).
From: 423,226 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Tungsten Carbide Straight Flutes Tap for Hardened Steels (〜 55 HRC)_WH55-OT
OSG
Suitable for tapping hardening steel up to 55 HRC.Work material: High hardness steel to 55 HRCFor coating / surface treatment / steelAccuracy (class) OH3
From: 4,973,225 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Point Tap for Through Holes 1015
GUHRING
[Features]· JIS standard compliant tap for through holes.· Supports a wide range of work materials from general steel to stainless steel.
From: 704,108 VND Days to Ship: Số ngày giao hàng: 8 Day(s) or more
8 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Pointed Tap Series TiN Coating TIN-POT
OSG
Features a wide range of uses, but especially suitable for high-speed tapping of stainless steel, tempered material, etc.
From: 776,666 VND Days to Ship: Số ngày giao hàng: 15 Day(s) or more
15 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
OSG
Exclusively for machines with a full-lead feed mechanism, it is capable of high-speed, high-precision through-hole tapping.
From: 1,427,350 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
TRUSCO NAKAYAMA
[Features]· Dimensional adjustments can be made with the adjustment screw provided. · Can also be used to modify screw threads. · For round dies. [Applications]· Work materials: iron, light metals. · For male threading. · Correction of coarse screw threads.
From: 578,945 VND Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
From: 1,477,510 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
From: 493,242 VND Days to Ship: Số ngày giao hàng: 4 Day(s)
4 Day(s)
-
You can add up to 6 items per a category to the compare list.
NACHI(FUJIKOSHI)
[Features]·Demonstrates excellent performance in various work materials, processing machines, and wide range of cutting conditions
From: 831,030 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
SMATO
From: 500,313 VND Days to Ship: Số ngày giao hàng: 4 Day(s)
4 Day(s)
-
You can add up to 6 items per a category to the compare list.
TiN Coated High-Speed Steel Roll Tap【5 Pieces Per Package】
MISUMI
[Features]·Used for thread forming that does not generate cutting chip·Supports a wide range of work materials from general steel to non-ferrous alloys·Excellent abrasion resistance and chip-weld resistance due to TiN coating
- Volume Discount
From: 2,253,921 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
| BrandNhãn hiệu |
|---|
| Product SeriesDòng sản phẩm |
| From |
| Days to ShipSố ngày giao hàng |
| Screw size (Nominal) |
| Screw Types |
| work material |
| Pitch (P), Number of Threading(mm) |
| Tool Material Type |
| Tap Type |
| Hole type |
| Chamfer threads (Lcf) |
| Coating Type |
| Coating Y/N |
| Overall Length (L)(mm) |
You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.      | |
| BrandNhãn hiệu | OSG | OSG | OSG | YAMAWA MFG | YAMAWA MFG | OSG | OSG | YG 1 | MISUMI | YAMAWA MFG | YG 1 | YAMAWA MFG | OSG | YAMAWA MFG | OSG | OSG | NACHI(FUJIKOSHI) | OSG | MISUMI | SBK | OSG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YG 1 | YG 1 | YAMAWA MFG | MISUMI | OSG | TRUSCO NAKAYAMA | YAMAWA MFG | OSG | OSG | YAMAWA MFG | YAMAWA MFG | OSG | GUHRING | OSG | OSG | TRUSCO NAKAYAMA | TANOI MFG | YG 1 | NACHI(FUJIKOSHI) | SMATO | MISUMI |
| Product SeriesDòng sản phẩm | Combo Spiral Tap Coating / Non-coating / Tin (T1809 / T2809 / 2819) | Spiral Fluted Taps, Coated, Through Hole Use（with LH Spiral Flutes）_AU+SL | Combo Spiral Long Tap General (T18 Series / T28 Series / TS721 Series) | Plus Series Spiral Fluted Taps,Optimum Coating for the Tapping_AU+SP | TiN Coated High-Speed Steel Point Tap【1-5 Pieces Per Package】 | Tungsten Carbide Straight Flutes Tap for Hardened Steels (50 HRC〜)_VX-OT | Tungsten Carbide Straight Flutes Tap for Hardened Steels (〜 55 HRC)_WH55-OT | ||||||||||||||||||||||||||||||||||||||
| From | 743,796 VND | 224,706 VND | 401,667 VND | 284,460 VND | 250,800 VND | 348,333 VND | 827,992 VND | 400,608 VND | 1,249,259 VND | 1,111,795 VND | 402,909 VND | 1,406,511 VND | 1,136,666 VND | 1,497,843 VND | 459,999 VND | 776,666 VND | 384,500 VND | 1,142,485 VND | 371,378 VND | 596,666 VND | 389,150 VND | 302,213 VND | 694,223 VND | 912,631 VND | 993,806 VND | 694,223 VND | 733,049 VND | 5,235,000 VND | 469,743 VND | 582,289 VND | 1,106,667 VND | 444,999 VND | 412,075 VND | 423,226 VND | 4,973,225 VND | 704,108 VND | 776,666 VND | 1,427,350 VND | 578,945 VND | 1,477,510 VND | 493,242 VND | 831,030 VND | 500,313 VND | 2,253,921 VND | |
| Days to ShipSố ngày giao hàng | 6 Day(s) or more | Same day or more | Same day or more | Same day or more | Same day or more | Same day or more | 6 Day(s) or more | Same day or more | 4 Day(s) or more | 6 Day(s) or more | 5 Day(s) | 6 Day(s) or more | Quote | 6 Day(s) or more | Quote | 6 Day(s) or more | 45 Day(s) | 6 Day(s) or more | Same day or more | 5 Day(s) or more | Same day or more | 6 Day(s) or more | Same day or more | 6 Day(s) or more | 6 Day(s) | 5 Day(s) | 6 Day(s) or more | Same day or more | Quote | Same day | 8 Day(s) or more | 6 Day(s) or more | 20 Day(s) or more | 9 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 8 Day(s) or more | 15 Day(s) or more | 6 Day(s) or more | Same day or more | 6 Day(s) or more | 4 Day(s) | 6 Day(s) or more | 4 Day(s) | 4 Day(s) or more |
| Screw size (Nominal) | M10 | M10 | M10 | M10 | M10 | M10 | M10 | M10 | M10 | M10 | M10 | M10 | M10 | M10 | M10 | M10 | M10 | M10 | M10 | M10 | M10 | M10 | M10 | M10 | M10 | M10 | M10 | M10 | M10 | M10 | M10 | M10 | M10 | M10 | M10 | M10 | M10 | M10 | M10 | M10 | M10 | M10 | M10 | M10 | M10 |
| Screw Types | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | - | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter |
| work material | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[◎] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Tool Steel (Before SKD Hardening)[◎] / Cast Iron (FC)[◎] / Copper (Cu)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Titanium Alloy (Ti-6Al-4V, etc)[◎] / Nickel-based alloy (Inconel, etc.)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] | - | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Tool Steel (Before SKD Hardening)[◎] / Cast Iron (FC)[◎] / Copper (Cu)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Titanium Alloy (Ti-6Al-4V, etc)[◎] / Nickel-based alloy (Inconel, etc.)[◎] | - | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] | Stainless steel (SUS)[◎] / Copper (Cu)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[◎] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Aluminum Alloy Casting (AC, ADC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Steel casting (SC)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[◎] / Steel casting (SC)[◎] / Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[◎] / Zinc Alloy Casting (ZDC)[◎] | - | High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[○] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Tool Steel (Before SKD Hardening)[◎] / Ductile Cast Iron (FCD)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] | High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Tool Steel (Before SKD Hardening)[◎] / Cast Iron (FC)[◎] / Copper (Cu)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Titanium Alloy (Ti-6Al-4V, etc)[◎] / Nickel-based alloy (Inconel, etc.)[◎] | - | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] | High Hardness Steel (50-60 HRC)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Stainless steel (SUS)[◎] / Copper (Cu)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Stainless steel (SUS)[○] | Quenched and tempered steel (45 to 55 HRC)[◎] | - | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Cast Iron (FC)[○] / Aluminum Alloy Casting (AC, ADC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Stainless steel (SUS)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎] | - | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] | - | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[◎] / Aluminum Rolled Material (AL)[◎] |
| Pitch (P), Number of Threading(mm) | 0.75 ～ 1.5 | 0.75 ～ 1.5 | 0.5 ～ 1.5 | 0.5 ～ 1.5 | 0.75 ～ 1.5 | 0.5 ～ 1.5 | 1 ～ 1.5 | 0.75 ～ 1.5 | 1.5 | 0.5 ～ 1.5 | 1.5 | 1 ～ 1.5 | 1 ～ 1.5 | 1.25 ～ 1.5 | 1.25 ～ 1.5 | 0.75 ～ 1.5 | 1 | 1 ～ 1.5 | 1.25 ～ 1.5 | 1 ～ 1.5 | 1.25 ～ 1.5 | 1 ～ 1.5 | 0.75 ～ 1.5 | 1 ～ 1.5 | 1.25 ～ 1.5 | 1.5 | 1 ～ 1.5 | 1.5 | 1 ～ 1.5 | 1.5 | 1 ～ 1.5 | 0.75 ～ 1.5 | 1 ～ 1.5 | 1 ～ 1.5 | 1.25 ～ 1.5 | 1.5 | 1.5 | 1.25 ～ 1.5 | 1.25 ～ 1.5 | 1.25 ～ 1.5 | 1 ～ 1.5 | 1.5 | 1.25 ～ 1.5 | 1.5 | 1.5 |
| Tool Material Type | Powder high-speed steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | High-speed steel | High-speed steel | High-speed steel | Vanadium High-Speed Steel | Cobalt HSS | Vanadium High-Speed Steel | High-speed steel | Vanadium High-Speed Steel | High-speed steel | Powder high-speed steel | High-speed steel | Vanadium High-Speed Steel | Powder high-speed steel | High-speed steel | Powder high-speed steel | Cobalt HSS | - | Powder high-speed steel | High-speed steel | High-speed steel | High-speed steel | Vanadium High-Speed Steel | High-speed steel | High-speed steel | Vanadium High-Speed Steel | Carbide | Vanadium High-Speed Steel | High-speed steel | Powder high-speed steel | Vanadium High-Speed Steel | High-speed steel | High-speed steel | Carbide | High-speed steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Alloy HSS | High-speed steel | Powder high-speed steel | Alloy HSS | SKS | Vanadium High-Speed Steel |
| Tap Type | Spiral Tap | Spiral Tap | Point tap | Spiral Tap | Hand Tap | Hand Tap | Roll tap | Spiral Tap | Hand Tap | Die | Point tap | Die | Roll tap | Spiral Tap | Spiral Tap | Point tap | Hand Tap | Roll tap | Spiral Tap | - | Spiral Tap | Spiral Tap | Point tap | Spiral Tap | Spiral Tap | Hand Tap | Spiral Tap | Point tap | Hand Tap | Spiral Tap | Spiral Tap | Spiral Tap | Point tap | Hand Tap | Spiral Tap | Hand Tap | Point tap | Point tap | Point tap | Die | Roll tap | Spiral Tap | Spiral Tap | Die | Roll tap |
| Hole type | For blind hole | For blind hole | For through hole | For blind hole | For through hole / For blind hole | For through hole / For blind hole | For blind hole | For blind hole | For through hole / For blind hole | - | For through hole | - | For blind hole | For through hole | For blind hole | For through hole | For through hole / For blind hole | For through hole / For blind hole | For blind hole | - | For blind hole | For blind hole | For through hole | For through hole | For blind hole | For blind hole | For blind hole | For through hole | For through hole / For blind hole | For blind hole | For blind hole | For blind hole | For through hole | For through hole / For blind hole | For blind hole | For through hole / For blind hole | For through hole | For through hole | For through hole | - | - | For through hole / For blind hole | For through hole / For blind hole | - | For through hole / For blind hole |
| Chamfer threads (Lcf) | 1.5P ～ 2.5P | 2.5P | 5P | 2.5P | 1.5P ～ 5P | 1.5P ～ 5P | 2P ～ 4P | 2.5 | 1.5P ～ 9P | - | 5 | - | 2P ～ 4P | 5.5P | 2.5P | 5P | 5P | 2P ～ 4P | 2.5P | - | 3P | 2.5P | 5P | 5P | 2.5 | - | 2.5P | 5P | 3P | 2.5P | 2.5P | 2.5P | 4P | 1.5P ～ 4P | 2.5P | 2.5P ～ 5P | - | 5P | 6P | - | 1P ～ 2P | 2.5 | 2.5 | - | 2P ～ 4P |
| Coating Type | Other | Non-Coated | Non-Coated | - | - | Non-Coated | TiN | Homo | - | - | Homo | - | TiCN | - | Non-Coated | Other | - | TiCN | Non-Coated | Homo / Non-homo | Non-Coated | - | - | TiN | Non-Coated / Homo | - | TiN | TiN | TiCN | - | - | Other | Non-Coated | - | - | TiCN | TiN | TiN | TiN | - | TiCN | Homo / Non-homo | TiCN | - | TiN |
| Coating Y/N | Available | NA | NA | NA | NA | NA | Available | Available / NA | NA | NA | Available | NA | Available | Available | NA | Available | NA | Available | NA | - | NA | NA | NA | Available | Available / NA | NA | Available | Available | Available | - | NA | Available | NA | NA | NA | Available | Available | Available | Available | - | Available | Available / NA | Available | - | Available |
| Overall Length (L)(mm) | 75 | 75 | 75 | 75 | 75 | 70 ～ 75 | 75 | 75 | 75 | - | 75 | - | 75 | 100 ～ 150 | 75 | 75 | 70 | 75 | 75 | 75 | 75 | 75 | 75 | 75 | 100 ～ 150 | 75 | 75 | 75 ～ 150 | 75 | 75 | 100 ～ 200 | 100 ～ 200 | 75 | 75 | 75 | 75 | 75 | 75 | 75 | - | 70 ～ 75 | 75 | 75 | - | 75 |
Loading...Tải…
ConfigureTạo
Specification/DimensionsĐặc điểm kỹ thuật / Kích thướcĐặc điểm kỹ thuật / Kích thước
-
Screw size (Nominal)
- CTG-54
- CTG-42
- CTG-36
- CTG-28
- CTG-22
- CTG-16
- PT-1-11
- NPT-1-11-1-2
- PT-1-1-2-11
- No.0
- No.0UN
- NO.0-80UNF
- No.10
- No.1
- No.1UN
- No.10UN
- S0.1
- NO.1-72UNF
- NO.1-64UNC
- NO.10-32UNF
- No.10-32UNF
- NO.10-24UNC
- No.10-24UNC
- No.12
- No.12UN
- NO.12-28UNF
- No.12-28UNF
- NO.12-24UNC
- No.12-24UNC
- No.2
- No.2UN
- S0.2
- NO.2-64UNF
- No.2-64UNF
- NO.2-56UNC
- No.2-56UNC
- No.3
- No.3UN
- S0.3
- NO.3-56UNF
- No.3-56UNF
- NO.3-48UNC
- No.3-48UNC
- No.4
- No.4UN
- S0.4
- NO.4-48UNF
- No.4-48UNF
- NO.4-40UNC
- No.4-40UNC
- No.5
- No.5UN
- S0.5
- NO.5-44UNF
- No.5-44UNF
- NO.5-40UNC
- No.5-40UNC
- 0.6
- No.6
- No.6UN
- S0.6
- NO.6-40UNF
- No.6-32UNC
- S0.7
- No.8
- No.8UN
- S0.8
- NO.8-36UNF
- No.8-36UNF
- NO.8-32UNC
- No.8-32UNC
- S0.9
- 1
- 1"
- 1UN
- 1UNS
- G1
- M1
- NPS1
- NPT1
- NPT 1"
- NPTF1
- PF1
- PF 1
- PF 1"
- PS 1
- PS 1"
- PT1
- PT1"
- PT 1
- PT 1"
- R1
- Rp1
- S1
- UNC1
- UNF1
- W1
- 1"-12
- 1'-11.5
- 1'-11
- PF1-11
- PT1-11
- 1-8UNC
- 1"-8
- 1"-8UNC
- PS1-1/2
- PS1-1/4
- 1 1/2
- 1"1/2UN
- G1"1/2
- NPS1"1/2
- NPT1"1/2
- NPT 1"1/2
- PF 1"1/2
- PT1"1/2
- PT 1 1/2
- R1"1/2
- W1"1/2
- 1'1/2-11
- 1 1/2-8UN
- 1 1/4
- 1"1/4UN
- G1"1/4
- NPS1"1/4
- NPT1"1/4
- PF 1"1/4
- PT1"1/4
- PT 1 1/4
- PT 1"1/4
- R1"1/4
- W1"1/4
- 1'1/4-11.5
- 1'1/4-11
- 1 1/4-8UN
- 1 1/8
- 1"1/8UN
- G1"1/8
- R1"1/8
- W1"1/8
- 1'1/8-11
- 1 1/8-8UN
- 1 1/16
- 1"1/16UN
- 1/2
- 1/2UN
- G1/2
- NPS1/2
- NPT1/2
- NPT 1/2
- NPTF1/2
- PF1/2
- PF 1/2
- PS1/2
- PS 1/2
- PT1/2
- PT 1/2
- R1/2
- Rc1/2
- Rp1/2
- UNC1/2
- UNF1/2
- W1/2
- 1/2-20
- 1/2-20UNF
- 1/2-14
- PF1/2-14
- PT1/2-14
- 1/2-13
- 1/2-13UNC
- 1/2-12
- 1/2-12W
- 1/2(1/16'-1/2)
- 1/2W12
- 1/2 - 13
- 1/2 - 20
- 1 3/4
- 1"3/4UN
- G1"3/4
- R1"3/4
- W1"3/4
- 1'3/4-11
- 1 3/4-8UN
- 1"3/4-5UNC
- 1 3/8
- 1"3/8UN
- G1"3/8
- R1"3/8
- W1"3/8
- 1 3/8-8UN
- 1/4
- 1/4UN
- 1/4UNJ
- G1/4
- NPS1/4
- NPT1/4
- NPT 1/4
- NPTF1/4
- PF1/4
- PF 1/4
- PS1/4
- PS 1/4
- PT1/4
- PT 1/4
- R1/4
- Rc1/4
- Rp1/4
- SM1/4
- UNC1/4
- UNF1/4
- W1/4
- 1/4-28
- 1/4-28UNF
- 1/4-20
- 1/4-20UNC
- 1/4-19
- PF1/4-19
- PT1/4-19
- 1/4-18
- 1/4(1/16'-1/4)
- 1/4 - 20
- 1/4W20
- 1 5/8
- W1"5/8
- 1 5/8-8UN
- M1 to 6
- W1"7/8
- 1 7/8-8UN
- 1" - 8
- 1'W8
- 1/8
- G1/8
- NPS1/8
- NPT1/8
- NPT 1/8
- NPTF1/8
- PF1/8
- PF 1/8
- PS1/8
- PS 1/8
- PT1/8
- PT 1/8
- R1/8
- Rc1/8
- Rp1/8
- SM1/8
- W1/8
- 1/8-40W
- 1/8-28
- PF1/8-28
- PT1/8-28
- 1/8-27
- 1/8-18
- M1 to 10
- 1 12
- 1" - 12
- 1" - 14
- 1/16
- G1/16
- NPS1/16
- NPT1/16
- NPT 1/16
- PT1/16
- PT 1/16
- R1/16
- 1/16-28
- 1/16-27
- 1 20
- M1.1
- M1.2
- S1.2
- 1.25
- M1.4
- S1.4
- 1.5
- M1.6
- M1.7
- M1.8
- 2
- 2UN
- G2
- M2
- M2.0
- NPS2
- NPT2
- NPT 2"
- PF 2"
- PS 2
- PS 2"
- PT2"
- PT 2
- PT 2"
- R2
- W2
- NO 2-56
- 2'-11.5
- 2'-11
- 2-8UN
- W2"1/4
- 2'1/4-11
- 2~2.5
- 2 4.5
- M2 to 4.5
- M2.2
- M 2.2
- M2.3
- M2.5
- M2.6
- 3
- 3M
- M3
- M3.0
- M 3
- M 3.0
- STI M3
- PS3-8-19
- NPT3-8-18
- 3/4
- 3/4UN
- G3/4
- NPS3/4
- NPT3/4
- NPT 3/4
- NPTF3/4
- PF3/4
- PF 3/4
- PS 3/4
- PT3/4
- PT 3/4
- R3/4
- Rp3/4
- UNC3/4
- UNF3/4
- W3/4
- 3/4-16
- 3/4-16UNF
- 3/4-14
- PF3/4-14
- PT3/4-14
- 3/4-10
- 3/4-10UNC
- 3/4 - 10
- 3/4W10
- 3/4 - 16
- 3/8
- 3/8-UNJ
- 3/8UN
- G3/8
- NPS3/8
- NPT3/8
- NPT 3/8
- NPTF3/8
- PF3/8
- PF 3/8
- PS3/8
- PS 3/8
- PT3/8
- PT 3/8
- R3/8
- Rc3/8
- Rp3/8
- UNC3/8
- UNF3/8
- W3/8
- 3/8-24
- 3/8-24UNF
- 3/8-19
- PF3/8-19
- PT3/8-19
- 3/8-18
- 3/8-16
- 3/8-16UNC
- 3/8 - 16
- 3/8W16
- 3/8 - 24
- 3~10
- M3 to 10
- 3/16
- SM3/16
- W3/16
- 3/16-32SM
- 3/16-24W
- 3/32
- SM3/32
- # 3 - 48
- # 3 - 56
- 3.5
- M3.5
- M3.5
- 4
- 4M
- M4
- M4.0
- M 4
- M 4.0
- STI M4
- NO 4-40
- M4 to 6
- M4 to 13
- # 4 - 40
- # 4 - 48
- M4.5
- M4.5
- 5
- 5M
- M5
- M5.0
- M5
- M 5
- M 5.0
- STI M5
- 5/8
- 5/8UN
- G5/8
- NPS5/8
- PT5/8
- R5/8
- UNC5/8
- UNF5/8
- W5/8
- 5/8-18
- 5/8-18UNF
- 5/8-14
- 5/8-11
- 5/8-11UNC
- 5/8 - 11
- 5/8W11
- 5/8 - 18
- M5 to 10
- M5-M12
- M5 to 13
- 5/16
- 5/16UN
- 5/16UNJ
- UNC5/16
- UNF5/16
- W5/16
- 5/16-24
- 5/16-24UNF
- 5/16-18
- 5/16-18UNC
- 5/16 - 18
- 5/16W18
- 5/16 - 24
- 5/32
- W5/32
- 5/32-36 UNC
- 5/32-32W
- # 5 - 40
- 5.5M
- M5.5
- M5.5
- 6
- M6
- M6.0
- M 6
- M 6.0
- STI M6
- No6-40UNF
- 6-32UNC
- NO 6-32
- M6 to 20
- # 6 - 32
- # 6 - 40
- M7
- M7.0
- M7
- M 7.0
- PG7
- 7/8
- 7/8UN
- G7/8
- NPS7/8
- PT7/8
- R7/8
- UNC7/8
- UNF7/8
- W7/8
- 7/8-14
- 7/8-14UNF
- 7/8-9
- 7/8-9UNC
- 7/8- 9
- 7/8W9
- 7/8- 14
- 7/16
- 7/16UN
- UNC7/16
- UNF7/16
- W7/16
- 7/16-20
- 7/16-20UNF
- 7/16-14UNC
- 7/16 - 14
- 7/16W14
- 7/16 - 20
- 7/32
- SM7/32
- 7/32-24W
- 7/64
- 7.5
- 8
- #8
- M8
- M8.0
- M 8.0
- STI M8
- TV8
- 8-32UNC
- NO 8-32
- # 8 - 32
- # 8 - 36
- 9
- M9
- M9
- PG9
- 9/16
- 9/16UN
- UNF9/16
- W9/16
- 9/16-18
- 9/16-18UNF
- 9/16-12
- 9/16-12UNC
- 9/16 - 12
- 9/16 - 18
- SM9/32
- 9/64
- SM9/64
- 10
- M10
- M10.0
- M10
- STI M10
- Tr 10
- 10-32UNF
- NO 10-32
- NO 10-24
- M10 to 13
- #10 - 24
- M10 to 25
- #10 - 32
- M11
- M11
- PG11
- 11/2
- NPT 11/2
- PF 11/2
- PS 11/2
- PT 11/2
- 11/4
- NPT 11/4
- PF 11/4
- PS 11/4
- PT 11/4
- 11/8
- 11/16
- 11~24
- SM11/32
- 11/64
- SM11/64
- 12
- M12
- M12.0
- M12
- STI M12
- Tr 12
- 12-1.0-2
- #12 - 24
- M13
- 13/4
- 13/8
- 13/16
- 13/32
- PG13.5
- 14
- M14
- M14.0
- M14
- Tr 14
- M15
- 15/8
- 15/64
- SM15/64
- 16
- M16
- M16.0
- M16
- PG16
- Tr 16
- M17
- 17/8
- 17/16
- 17/32
- 17/64
- 18
- M18
- M18.0
- M18
- Tr 18
- M19
- M19 to 32
- M19 to 38
- 20
- M20
- M20.0
- M20
- Tr 20
- M21
- PG21
- 22
- M22
- M22.0
- M22
- M22X
- Tr 22
- 22-1.0
- M23
- 24
- M24
- M24.0
- M24
- M24X
- Tr 24
- 24-2.0-2
- 25
- M25
- M25X
- Tr 25
- M25 to 50
- M25 to 70
- M26
- Tr 26
- 27
- M27
- M27.0
- 27~36
- M28
- Tr 28
- PG29
- 30
- M30
- M30.0
- Tr 30
- M32
- 33
- M33
- M34
- M35
- 36
- M36
- PG36
- M38
- 39
- M39
- M40
- 42
- M42
- PG42
- M44
- 45
- M45
- M48
- M50
- M56
- M64
- 1015
- 1020N100M
- 1020N150M
- 06510X28R
- 10154
- 12204
- 12254N100M
- 12254N150M
- 12254N200M
- 16304N100M
- 16304N150M
- 16304N200M
- 16304N250M
- 20305
- 20505N100M
- 20505N150M
- 20505N200M
- 20505N300M
- 20505N350M
- 25506N100M
- 25506N150M
- 25506N200M
- 25506N300M
- 25506N350M
- 32506
- 32506N150M
- 32506N200M
- 32506N300M
- 035083N075M
- 035083N080M
- 040123N100M
- 060163N050M
- 060163N100M
- 060163N125M
- 065103X28G
- 075203N125M
- 075203N150M
- 080153X19G
- 080153X19R
- 080203N050M
- 080203N100M
- 090244N125M
- 090244N175M
- 100254N050M
- 100254N100M
- 100254N150M
- 100254N200M
- 120204X14G
- 120204X14R
- 120304N100M
- 120304N150M
- 120304N200M
- 160264X11G
- 160264X11R
- 160404N150M
- 160404N200M
- 160404N250M
- 200305X11G
- 200305X11R
- 200505N150M
- 200505N200M
- 200505N300M
-
Screw Types
- Meter
- unified
- Whitworth
- Sewing Machine
- Taper for Pipe
- Parallel for Pipes
- Trapezoid
- Miniature
- Other
-
work material
- Low-Carbon Steel (carbon alloy less than 0.25%)
- Medium carbon steel (carbon content 0.25 to 0.45%)
- High Carbon Steel (C with a content over 0.45%)
- Alloy Steel (SCM)
- Stainless steel (SUS)
- Quenched and tempered steel (25 to 35 HRC)
- Quenched and tempered steel (35 to 45 HRC)
- Quenched and tempered steel (45 to 55 HRC)
- High Hardness Steel (50-60 HRC)
- Tool Steel (Before SKD Hardening)
- Steel casting (SC)
- Cast Iron (FC)
- Ductile Cast Iron (FCD)
- Copper (Cu)
- Brass (Bs)
- Brass cast iron (BsC)
- Bronze (Pb)
- Aluminum Rolled Material (AL)
- Aluminum Alloy Casting (AC, ADC)
- Magnesium Alloy (MC)
- Zinc Alloy Casting (ZDC)
- Titanium Alloy (Ti-6Al-4V, etc)
- Nickel-based alloy (Inconel, etc.)
- Thermosetting plastic (bakelite, phenol, etc.)
- Thermoplastic plastic (vinyl chloride, nylon, etc.)
-
Pitch (P), Number of Threading(mm)
- .02
- 0.025
- 0.05
- 0.08
- 0.1
- 0.125
- 0.15
- 0.175
- 0.2
- 0.225
- 0.25
- 0.3
- 0.35
- 0.4
- 0.45
- 0.5
- 0.6
- 0.7
- 0.75
- 0.75、1.00、1.25、1.50、1.75、2.00、2.50、3.00
- 0.8
- 0.9
- 1
- 1-1/8-7~1-1/26
- 1.2
- 1.25
- 1.5
- 1.7
- 1.75
- 2
- 2-56~8-32
- 2.5
- 3
- 3/8-16~1-8
- 3.5
- 4
- 4 1/2 UNC
- 4.5
- 5
- 5 UNC
- 5.5
- 6
- 6 UNC
- 7
- 7 UNC
- 8
- 8 UNC
- 8 UNS
- 8DØ
- 8J UNS
- 9
- 9 UNC
- 10
- 10 UNC
- 10-24~5/16-18
- 10、11、12、14、16、18、20、24F
- 11
- 11 UNC
- 11 1/2
- 11 1/2DØ
- 11.5
- 12
- 12 UNF
- 12 UNS
- 13
- 13 UNC
- 14
- 14 UNC
- 14 UNF
- 14 UNS
- 14DØ
- 16
- 16 UNC
- 16 UNF
- 16UNC
- 18
- 18 UNC
- 18 UNF
- 18DØ
- 19
- 20
- 20 UNC
- 20 UNF
- 20UNC
- 24
- 24 UNF
- 27
- 27DØ
- 28
- 28 UNF
- 32
- 32UNC
- 36
- 40
- 44
- 48
- 56
- 64
- 72
- 80
- 150
-
Tool Material Type
- High-speed steel
- Cobalt HSS
- Powder high-speed steel
- Carbide
- Alloy HSS
- Vanadium High-Speed Steel
- SKS
-
Tap Type
-
Hole type
-
Chamfer threads (Lcf)
-
Coating Type
-
Coating Y/N
-
Overall Length (L)(mm)
Related Categories to Screw-Hole-Related ToolsDanh mục liên quan đến Screw-Hole-Related Tools
-
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
MISUMI Contact
TALK ID : Misumi_vn
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy