(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.
Brand |
|
---|---|
CAD |
|
Days to Ship |
|
29 itemsMặt hàng
You can add up to 6 items per a category to the compare list.
Hand Tap / Drill Set【21 Pieces Per Package】
ISHIHASHI
[Features]・ A set of hand taps and prepared hole drills for general steel[Applications]・ Work material: General steel
From: 4,661,073 VND |
---|
Days to Ship: Số ngày giao hàng: Same day |
You can add up to 6 items per a category to the compare list.
Spiral Tap / Drill Set【21 Pieces Per Package】
ISHIHASHI
[Features]・ A set of spiral flute tap and pilot hole drill for general steel[Applications]・ Work material: General steel
From: 7,666,752 VND |
---|
Days to Ship: Số ngày giao hàng: 9 Day(s) |
You can add up to 6 items per a category to the compare list.
Check Pins for Bored Holes in Thread Cut Tapping (Taper Type)_CPC-T
YAMAWA MFG
Provides simple check of pilot hole diameter. Uses high speed tool steel out of consideration for wear resistance. Can be used for either through holes or blind holes with margin.
From: 354,303 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
HOZAN
A tap set with T-type handle and 3 sizes of tap.[Features]· Tap size is (M3 x 0.5/M4 x 0.7/M5 x 0.8).· All taps are medium tap types.· Threading tool set consisting of a T handle and 3 tap sizes.[Applications]· Ideal for threading.
From: 515,995 VND |
---|
Days to Ship: Số ngày giao hàng: Same day |
You can add up to 6 items per a category to the compare list.
ONISHI MANUFACTURING
[Features]· Impact drill compatible hexagonal shaft drilling tool for simultaneous pilot hole drilling and thread cutting work.[Applications]· For formation and modification of through-hole threads.· Work materials: Iron, aluminum, brass.[Features]· 1 unit enables pilot hole machining and thread cutting at the same time.· 6.35 mm hex shaft finish that supports impact drivers.· Drill cutting edge with good bite due to X-type thinning and outstanding sharpness
From: 797,501 VND |
---|
Days to Ship: Số ngày giao hàng: 9 Day(s) |
You can add up to 6 items per a category to the compare list.
Check Pins for Bored Hole in Thread Cut Tapping (Straight Type)_CPC-S
YAMAWA MFG
5-piece set that can be used to check several types of pilot holes and pilot hole depth. High-speed tool steel is used out of consideration for abrasion resistance. Can be used for both through-holes and blind-holes.
From: 526,815 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
OSG
Mainly used for tapping nuts. Considering the workability of the nut, the length of the thread section and shank part are long, and continuous machining is possible until the nut is fully filled in the shank part.
From: 660,190 VND |
---|
Days to Ship: Số ngày giao hàng: 20 Day(s) |
You can add up to 6 items per a category to the compare list.
Cobalt spiral type/drill set【21 Pieces Per Package】
ISHIHASHI
[Features]・ A set of spiral flute tap and pilot hole drill for stainless steel and difficult-to-cut materials[Applications]・ Work material: Stainless steel, difficult-to-cut materials
From: 8,692,644 VND |
---|
Days to Ship: Số ngày giao hàng: 9 Day(s) |
You can add up to 6 items per a category to the compare list.
YAMAWA MFG
[Features]· Tap holder used to extend the tap length for use.· Can be used to make I series taps (ISP/IPO/IHT) longer.· Alloy steel.
From: 3,508,737 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
MACHINING CENTER Tap (Normal Length)_EX-S-MCT
OSG
Stable performance can be obtained by suppressing the cutting chips from getting caught that tends to occur in the horizontal machining center.
From: 394,265 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Jet/spiral tap/drill set【21 Pieces Per Package】
ISHIHASHI
[Features]・ A set of jet taps, spiral flute taps and prepared hole drills for general steel[Applications]・ Work material: General steel
From: 7,214,690 VND |
---|
Days to Ship: Số ngày giao hàng: 9 Day(s) |
You can add up to 6 items per a category to the compare list.
ENGINEER
From: 461,672 VND |
---|
Days to Ship: Số ngày giao hàng: 9 Day(s) |
You can add up to 6 items per a category to the compare list.
Check Pins for Bored Holes in Thread Form Tapping (Taper Type)_CPR-T
YAMAWA MFG
[Features]· (Taper type) Roll tap pilot hole check pin that can be used to easily check pilot hole diameters with the 1 tool.· High-speed tool steel is used out of consideration for abrasion resistance.· Can be used for both through-holes and blind-holes if the latter has ample room.
From: 376,635 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Straight Flutes Tap Combined with Drill_DRT
OSG
It is very effective for improving productivity because the drill part at the tip makes a pilot hole for the tap and tapping can be done continuously at the tap part.
From: 1,470,378 VND |
---|
Days to Ship: Số ngày giao hàng: 20 Day(s) |
You can add up to 6 items per a category to the compare list.
MACHINING CENTER Tap with Long Shank_EX-MCT
OSG
Stable performance can be obtained by suppressing the cutting chips from getting caught that tends to occur in the horizontal machining center.
From: 1,031,725 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Hexagonal Shaft Point Tap for Stainless Steel (for Through Hole)
ONISHI MANUFACTURING
[Features]· Can be attached to impact screwdriver models capable of forward and reverse rotation to easily drill screw holes.· Chips inside the work material are discharged forward.· Stable machining, unlikely to break.· Due to titanium coating, durability is enhanced, and it can be used on stainless steel as well
From: 469,674 VND |
---|
Days to Ship: Số ngày giao hàng: Same day or more |
You can add up to 6 items per a category to the compare list.
Hexagonal Shaft Spiral Tap (for Through Hole / Blind Hole)
ONISHI MANUFACTURING
[Features]· Uses HSS that features excellent abrasion resistance.· Can be attached to impact screwdriver models capable of forward and reverse rotation to easily drill screw holes.· Cutting chips are discharged upwards due to the spiral groove
From: 407,033 VND |
---|
Days to Ship: Số ngày giao hàng: 9 Day(s) |
You can add up to 6 items per a category to the compare list.
Hexagonal Shaft Tap (for Through Hole)【1-3 Pieces Per Package】
ONISHI MANUFACTURING
From: 228,784 VND |
---|
Days to Ship: Số ngày giao hàng: 9 Day(s) |
You can add up to 6 items per a category to the compare list.
Electro plated Diamond Tap for Ceramics_ED-PNT
OSG
[Features]·With no lead like a regular power strip in this product, the tool attached to the shaft of the pilot hole performs a self-rotating and orbital motion to grind a thread with a lead.·The X, Y, and Z axes are fed simultaneously, so the prerequisite for use is that the machine is equipped with a 3-axis simultaneous control mechanism.
From: 5,130,196 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Cobalt jet/spiral type/drill set【21 Pieces Per Package】
ISHIHASHI
[Features]・ A set of stainless steel, jet tap, spiral flute tap and prepared hole drill for difficult-to-cut materials[Applications]・ Work material: Stainless steel, difficult-to-cut materials
From: 8,519,924 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Spiral Tap / Drill Set for Electric Construction【26 Pieces Per Package】
ISHIHASHI
[Features]・ A set of spiral flute tap and pilot hole drill for general steel[Applications]・ Work material: General steel
From: 5,508,000 VND |
---|
Days to Ship: Số ngày giao hàng: 9 Day(s) |
You can add up to 6 items per a category to the compare list.
Mid Tap / Drill Set for Electric Construction【26 Pieces Per Package】
ISHIHASHI
[Features]・ A set of hand taps and prepared hole drills for general steel[Applications]・ Work material: General steel
From: 3,780,753 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Jet tap/drill set【21 Pieces Per Package】
ISHIHASHI
Set in steel case including jet taps, pilot hole drills, and tap wrenches
From: 7,420,459 VND |
---|
Days to Ship: Số ngày giao hàng: 16 Day(s) |
You can add up to 6 items per a category to the compare list.
RUKO
【特長】・六角軸シャンク仕様で、コードレスドライバーに装着可能です。・鉄板等の下穴開け作業とネジ切り作業をドリルを交換せずに行うことができます。【用途】・穴あけ、ネジ山の形成・修正に。・被削材:鉄、アルミ、銅。
From: 617,400 VND |
---|
Days to Ship: Số ngày giao hàng: 9 Day(s) |
You can add up to 6 items per a category to the compare list.
RUKO
【特長】・六角軸シャンク仕様で、コードレスドライバーに装着可能です。・鉄板等の下穴開け作業とネジ切り作業をドリルを交換せずに行うことができます。【用途】・穴あけ、ネジ山の形成・修正に。・被削材:鉄、アルミ、銅、ステンレス。
From: 980,280 VND |
---|
Days to Ship: Số ngày giao hàng: 9 Day(s) |
You can add up to 6 items per a category to the compare list.
六角軸タッピングドリルセット(TiNコーティング)【6 Pieces Per Package】
RUKO
【特長】・六角軸シャンク仕様で、コードレスドライバーに装着可能です。・鉄板等の下穴開け作業とネジ切り作業をドリルを交換せずに行うことができます。【用途】・穴あけ、ネジ山の形成・修正に。・被削材:鉄、アルミ、銅、ステンレス。
From: 8,446,680 VND |
---|
Days to Ship: Số ngày giao hàng: 9 Day(s) |
You can add up to 6 items per a category to the compare list.
UNION TOOL
[Features]· Thread cutting tool for machining carbide alloys and hard brittle materials. (Thread mill type)· Enables direct engraving, dramatically improving efficiency and precision of discharge and grinding.· Uses a newly developed diamond coating with ultra high hardness for toughness and adhesive strength.
From: 10,007,911 VND |
---|
Days to Ship: Số ngày giao hàng: 7 Day(s) or more |
You can add up to 6 items per a category to the compare list.
KANETEC
[Features]· Small, lightweight, and easy to carry around.· Tap guide holder that can easily perform accurate tapping operation on plane and side surface.[Applications]· For threading work.· A tool that simplifies work by facilitating tapping of pilot holes in iron plate and steel, etc., with a work stand installed with a powerful magnet.
From: 10,340,223 VND |
---|
Days to Ship: Số ngày giao hàng: 9 Day(s) |
You can add up to 6 items per a category to the compare list.
Check Pins for Bored Hole in Thread Form Tapping (Straight Type)_CPR-S
YAMAWA MFG
[Features]· (Straight type) Roll tap check pin that can be used to check several types of pilot hole diameters and pilot hole depth.· High-speed tool steel is used out of consideration for abrasion resistance.· Can be used for blind holes.
From: 538,088 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
BrandNhãn hiệu |
---|
Product SeriesDòng sản phẩm |
From |
Days to ShipSố ngày giao hàng |
Screw size (Nominal) |
Screw Types |
work material |
Pitch (P), Number of Threading(mm) |
Tool Material Type |
Tap Type |
Hole type |
Chamfer threads (Lcf) |
Coating Type |
Coating Y/N |
Overall Length (L)(mm) |
You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | |
BrandNhãn hiệu | ISHIHASHI | ISHIHASHI | YAMAWA MFG | HOZAN | ONISHI MANUFACTURING | YAMAWA MFG | OSG | ISHIHASHI | YAMAWA MFG | OSG | ISHIHASHI | ENGINEER | YAMAWA MFG | OSG | OSG | ONISHI MANUFACTURING | ONISHI MANUFACTURING | ONISHI MANUFACTURING | OSG | ISHIHASHI | ISHIHASHI | ISHIHASHI | ISHIHASHI | RUKO | RUKO | RUKO | UNION TOOL | KANETEC | YAMAWA MFG |
Product SeriesDòng sản phẩm | Check Pins for Bored Holes in Thread Cut Tapping (Taper Type)_CPC-T | Check Pins for Bored Hole in Thread Cut Tapping (Straight Type)_CPC-S | Check Pins for Bored Holes in Thread Form Tapping (Taper Type)_CPR-T | Hexagonal Shaft Point Tap for Stainless Steel (for Through Hole) | Hexagonal Shaft Tap (for Through Hole)【1-3 Pieces Per Package】 | Spiral Tap / Drill Set for Electric Construction【26 Pieces Per Package】 | Mid Tap / Drill Set for Electric Construction【26 Pieces Per Package】 | Check Pins for Bored Hole in Thread Form Tapping (Straight Type)_CPR-S | |||||||||||||||||||||
From | 4,661,073 VND | 7,666,752 VND | 354,303 VND | 515,995 VND | 797,501 VND | 526,815 VND | 660,190 VND | 8,692,644 VND | 3,508,737 VND | 394,265 VND | 7,214,690 VND | 461,672 VND | 376,635 VND | 1,470,378 VND | 1,031,725 VND | 469,674 VND | 407,033 VND | 228,784 VND | 5,130,196 VND | 8,519,924 VND | 5,508,000 VND | 3,780,753 VND | 7,420,459 VND | 617,400 VND | 980,280 VND | 8,446,680 VND | 10,007,911 VND | 10,340,223 VND | 538,088 VND |
Days to ShipSố ngày giao hàng | Same day | 9 Day(s) | 6 Day(s) or more | Same day | 9 Day(s) | 6 Day(s) or more | 20 Day(s) | 9 Day(s) | 6 Day(s) or more | 6 Day(s) or more | 9 Day(s) | 9 Day(s) | 6 Day(s) or more | 20 Day(s) | 6 Day(s) or more | Same day or more | 9 Day(s) | 9 Day(s) | 6 Day(s) or more | 6 Day(s) or more | 9 Day(s) | 6 Day(s) or more | 16 Day(s) | 9 Day(s) | 9 Day(s) | 9 Day(s) | 7 Day(s) or more | 9 Day(s) | 6 Day(s) or more |
Screw size (Nominal) | - | - | M2 ~ M12 | - | M3 ~ M6 | No.10 ~ M12 | M4 ~ M12 | - | M3 ~ M10 | M8 ~ M22 | - | - | No.10 ~ M12 | M8 ~ M16 | M10 ~ M12 | M3 ~ M6 | M6 ~ M10 | M3 ~ M4 | - | - | - | - | - | M3 ~ M10 | M3 ~ M10 | - | M2 ~ M8 | - | No.10 ~ M12 |
Screw Types | - | - | Meter | Meter | Meter | Meter / unified | Meter | Meter | Meter | Meter | - | - | Meter / unified | Meter | Meter | Meter | Meter | Meter | Other | Meter | - | - | - | Meter | Meter | - | - | - | Meter / unified |
work material | - | - | - | Low-Carbon Steel (carbon alloy less than 0.25%)[○] | Steel casting (SC)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] | - | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[◎] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[◎] / Zinc Alloy Casting (ZDC)[◎] | - | - | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[◎] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | - | - | - | Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[◎] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[◎] / Zinc Alloy Casting (ZDC)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / Alloy Steel (SCM)[○] / Steel casting (SC)[◎] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | Stainless steel (SUS)[○] / Steel casting (SC)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] | Steel casting (SC)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] | Steel casting (SC)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] | - | - | - | - | - | - | - | - | - | - | - |
Pitch (P), Number of Threading(mm) | - | - | 0.4 ~ 1.75 | - | 0.5 ~ 1 | 0.35 ~ 64 | 0.5 ~ 1.75 | - | 150 | 1.25 ~ 2.5 | - | - | 0.4 ~ 64 | 1.25 ~ 2 | 1.5 | 0.5 ~ 1 | 1 ~ 1.5 | 0.5 ~ 0.7 | 0.5 ~ 2 | - | - | - | - | 0.5 ~ 1.5 | 0.5 ~ 1.5 | - | 0.4 ~ 1.25 | - | 0.4 ~ 64 |
Tool Material Type | - | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | Cobalt HSS | - | Vanadium High-Speed Steel | High-speed steel | - | High-speed steel | High-speed steel | Vanadium High-Speed Steel | High-speed steel | High-speed steel | High-speed steel | - | Cobalt HSS | - | - | - | - | - | - | - | - | High-speed steel |
Tap Type | Thread-cutting-related tool | Thread-cutting-related tool | Thread-cutting-related tool | Thread-cutting-related tool | Thread-cutting-related tool | Thread-cutting-related tool | Thread-cutting-related tool | Thread-cutting-related tool | Thread-cutting-related tool | Thread-cutting-related tool | Thread-cutting-related tool | Thread-cutting-related tool | Thread-cutting-related tool | Thread-cutting-related tool | Thread-cutting-related tool | Thread-cutting-related tool | Thread-cutting-related tool | Thread-cutting-related tool | Thread-cutting-related tool | Thread-cutting-related tool | Thread-cutting-related tool | Thread-cutting-related tool | Thread-cutting-related tool | Thread-cutting-related tool | Thread-cutting-related tool | Thread-cutting-related tool | Thread-cutting-related tool | Thread-cutting-related tool | Thread-cutting-related tool |
Hole type | - | - | - | For through hole / For blind hole | For through hole | For through hole / For blind hole | - | - | - | For through hole / For blind hole | - | - | For through hole / For blind hole | - | For through hole / For blind hole | For through hole | For through hole / For blind hole | For through hole | - | - | - | - | - | - | - | - | - | - | For blind hole |
Chamfer threads (Lcf) | - | - | - | - | - | - | - | - | - | 3P | - | - | - | 5P | 3P | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Coating Type | Non-Coated | Non-Coated | - | - | Non-Coated | - | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | - | Non-Coated | Non-Coated | Non-Coated | TiN | Non-Coated | Non-Coated | - | Non-Coated | Non-Coated | Non-Coated | Non-Coated | - | - | - | Other | - | Non-Coated |
Coating Y/N | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | - | NA | NA | NA | Available | NA | NA | - | NA | NA | NA | NA | - | - | - | Available | - | NA |
Overall Length (L)(mm) | - | - | 42 ~ 110 | - | 66 ~ 69 | 41.5 ~ 121 | 100 ~ 170 | - | 103 ~ 127 | 70 ~ 115 | - | 85 x 60 ~ 170 | 59.5 ~ 61.5 | 102 ~ 159 | 150 | 70 | 70 | 70 ~ 70/70/70 | 50 ~ 80 | - | - | - | - | 36 ~ 59 | 36 ~ 59 | - | 50 ~ 60 | - | 41.5 ~ 121 |
Loading...Tải…
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy