Cutters / Indexable End Mills

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroMill 590 Cutter

  SANDVIK

  A light-cutting face milling cuter suitable for high-speed finishing[Features]The tool is designed with a serrated-tip interface for increased stability and reduced run-out

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Side	63mm ～ 160mm	Quenched and tempered steel / high hardness steel / Cast Iron / Aluminum / Copper	Finishing	40 ～ 63	5 ～ 10	Arbor	22 ～ 40	-	-	Carbide Coat

  From: 30,615,236 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MEC Type End Mill

  KYOCERA

  Shoulder grinding, groove cutting, and plane surface grinding are all possible.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Side / Groove	10 ～ 50	-	-	80 ～ 250	1 ～ 5	-	10 ～ 32	-	-	-

  From: 4,130,914 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MFH Type High Feed Cutter MFH Mini End Mill

  KYOCERA

  [Features]· Economical with double-sided 4 corners.· With a small diameter / multi-flute specification, machining can be realized with high efficiency/feed even when using small machining centers.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  -	16 ～ 32	general steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Titanium	-	79 ～ 200	2 ～ 6	With handle	16 ～ 32	20 ～ 120	-	-

  From: 5,572,296 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MFWN90 Type Face Mill Holder

  KYOCERA

  MFWN90 type face mill[Features]·Good sharpness with low resistance·Resistant to chatter·Thick wall design with excellent chipping resistance, neutral insert·Long life with new technology MEGACOAT NANO·A lineup of 5 chipbreakers for different machining applications

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Side / Groove / Vertical	-	-	-	-	3 ～ 18	-	-	-	-	-

  From: 10,839,052 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Mirror Radius End Mill (Ultra Hard Shank), RNM-S-C Shape

  DIJET

  [Specifications]· Mounting Method: Type with Handle· Work materials: General steel, tempered steel, high hardness steel, stainless steel, cast iron[Applications] Flat Surfaces / Side Surfaces / Grooves / Vertical

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Side / Groove / Vertical	6 ～ 25	general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron	-	80 ～ 250	-	With handle	6 ～ 25	30 ～ 170	-	-

  From: 6,992,594 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MCSE Type Chamfering End Mill

  KYOCERA

  [Applications]Can be used for chamfering, back chamfering, V-groove machining, and hole chamfering during metal machining.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Groove / Chamfer	-	-	-	85 ～ 120	1 ～ 3	-	16 ～ 32	30 ～ 40	-	-

  From: 2,622,468 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-Wave Mill for WGX Type, WGX-R(S)

  SUMITOMO ELECTRIC HARDMETAL

  Achieves low resistance with a dedicated chip breaker. For general cutting of steel and cast iron.[Features]・ The high rake chip breaker designed for the WGX type achieves low resistance.・ Achieves an excellent finished surface with improved blade runout accuracy and a unique sweeping blade shape.・ Addition of chamfer suppresses burrs and edge chips.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Groove / Chamfer	40 ～ 250	general steel / Quenched and tempered steel / Stainless Steel / Cast Iron	Rough and medium rough processing	-	3 ～ 10	Arbor	-	-	6	-

  From: 7,227,280 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Phoenix Face Milling Cutter, 4-Corner Shoulder Mill Cutting Bore Type

  OSG

  [Features]· OSG Phoenix Series· A straight shank type.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Side / Groove	50 ～ 80	-	-	40 ～ 50	3 ～ 9	Arbor	-	-	-	-

  From: 13,359,813 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroMill 390 End Mill Threaded-Type Coupling R390-T

  SANDVIK

  [Features]Rivals the performance of solid end millsHigh precisionNo miss-matchesShoulder cuttingGroovingProfilingHelical machiningLappingCan be used for all types of machiningThreaded-type coupling

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Side / Groove	16 ～ 42	general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron / Aluminum / Titanium / Copper	Rough and medium rough processing / Finishing	-	2 ～ 4	Centering Plug	8 ～ 16	25 ～ 45	10	Carbide Coat

  From: 10,338,223 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MULTI CHAMFER TOOL

  EXPOWER

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  -	-	-	-	-	-	-	-	-	-	-

  From: 1,624,395 VND
  Days to Ship: Số ngày giao hàng: 5 Day(s)

  5 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Holder for internal machining C-STLB-AN type

  KYOCERA

  【特長】・C-STLB-AN型：優れた切りくず排出性を実現するダイナミックバーです。【用途】・ボーリングバー・内径・奥端面加工用【商品仕様】・適合チップ：TB○○0601・スクリュークランプ方式・超硬バー：最大突出し量L/D=？7・JANコード：4960664766079・トラスココード：820-4987

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  -	-	-	-	-	-	-	-	-	-	-

  From: 7,202,044 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  METS Type T-Slot Mill

  KYOCERA

  [Features]·This product is capable of T-grooving and backside machining.Rake angle (°) A.R.: +9Rake angle (°) RR: -10, -12

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Groove	-	-	-	109 ～ 140	2 ～ 4	-	25 ～ 32	29 ～ 60	-	-

  From: 6,277,518 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MECH Type End Mill (With Coolant Holes at Tip Blade)

  KYOCERA

  [Applications]Can be used for shoulder milling and face milling. [Features]This product has a coolant hole to the tip blade.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Side / Groove	25 ～ 50	-	-	120 ～ 185	8 ～ 42	-	25 ～ 42	-	-	-

  From: 13,301,784 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Milling holder SPK PEK type

  KYOCERA

  【特長】・PEK型【用途】・SPKセラミック工具用ホルダ・フェースミル・荒/仕上げ用【商品仕様】・適合チップ：SN○○1204・コーナ角：88°・簡易刃先調整機能付き・インロー部：ミリ仕様・JANコード：4960664671397・トラスココード：825-0153

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane	63 ～ 100	Cast Iron	Finishing	40 ～ 50	6 ～ 10	Arbor	-	-	-	Ceramic / CBN

  From: 19,848,255 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  PSE SS Phoenix Series Shoulder Milling Cutter Straight Shank Type

  OSG

  The employment of this high-precision insert achieves excellent bottom surface roughness. Due to the effect of the bottom notch, cutting chips are split into 2 during ramping and helical milling, which suppresses chip biting and entanglement, enabling smooth milling.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Side / Groove	16 ～ 63	general steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum / Titanium	-	90 ～ 190	2 ～ 6	With handle	16 ～ 32	25 ～ 90	-	Carbide Coat / No Carbide Coat

  From: 6,288,141 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  PHC BORE Phoenix Series High Feed Radius Cutter Bore Type

  OSG

  PHC bore type radius cutter. Machining applications: planes, sides, grooves, carving, shape shaving

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Side / Groove / Vertical	23.4 ～ 83.4	general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron / Titanium	-	40 ～ 63	3 ～ 8	Arbor	-	-	-	Carbide Coat

  From: 9,704,373 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Full Cut Mill (FCM type Long)

  BIG DAISHOWA SEIKI

  [Features]· It is comparable to a sharp and tough solid end mill. Throw-away end mill cutter. Low resistance and high efficiency cutter dedicated for lateral feed processing.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Side / Groove	16 ～ 32	-	-	-	2	With handle	-	45 ～ 90	-	-

  From: 6,849,906 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Full Cut Mill FCM Type Straight Shank Type

  BIG DAISHOWA SEIKI

  [Features]· A highly versatile straight shank type. Combination with the MEGA Double Power Chuck enables comfortable work.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Side / Groove	12 ～ 50	-	-	90 ～ 180	1 ～ 5	With handle	16 ～ 32	15 ～ 48	-	-

  From: 4,494,058 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MEW Type End Mill Holder

  KYOCERA

  Be aware that chips or parts may scatter due to centrifugal force if accidentally rotating at the maximum rotation speed or higher.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Side / Groove / Vertical	16 ～ 50	-	-	100 ～ 170	2 ～ 5	-	12 ～ 32	-	-	-

  From: 5,387,165 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  CoroMill 245 Cutter

  SANDVIK

  Suitable for high-efficiency machining.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane	62.5mm ～ 268.8mm	general steel / Stainless Steel / Cast Iron	Finishing	-	4 ～ 12	Arbor	22 ～ 50.8	-	6 ～ 10	Carbide Coat

  From: 17,328,952 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  京セラ ミーリング用ホルダ SPK

  KYOCERA

  【特長】・PFK型【用途】・SPKセラミック工具用ホルダ・フェースミル・荒加工用【商品仕様】・適合チップ：SN○○1204・コーナ角：88°・インロー部：ミリ仕様・JANコード：4960664671328・トラスココード：825-0162

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  -	-	-	-	-	-	-	-	-	-	-

  From: 18,422,992 VND
  Days to Ship: Số ngày giao hàng: 12 Day(s)

  12 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  MEF Type Counterbore End Mill

  KYOCERA

  [Features]·This product allows the machining diameter to be set arbitrarily in 0.1 mm increments.·It can also handle narrow machining diameters that are not in the standard repertoire.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Side	-	-	-	103 ～ 176	1 ～ 4	-	10 ～ 32	23 ～ 96	-	-

  From: 3,786,458 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-Wave Mill WEX2000F Type

  SUMITOMO ELECTRIC HARDMETAL

  [Features]・ Improved cutting edge strength and reduced cutting force by adopting a uniquely curved cutting edge. Achieves a high-quality machined surface that approaches the finishing area with a high-precision cutting edge. Smooth machining even with deep groove machining and low-rigidity machines.・ Improved cutting chip discharge with air and coolant.・ Special surface treatment improves corrosion and scratch resistance, and the increase in thread size improves clamping force and durability.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Side / Groove	40 ～ 63	general steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum / Titanium	Rough and medium rough processing	-	-	Arbor	-	-	10	-

  From: 12,273,924 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-Wave Multifunctional, Standard Type WMM2000E

  SUMITOMO ELECTRIC HARDMETAL

  [Features]・ Enables shoulder milling, grooving, and drilling with a single WMM type.・ Ideal for high efficiency ramping, helical drilling, and pocket machining.・ Use of a wave mill insert achieves both cutting performance and cutting edge strength.・ Reduced cutting force realizes the same cutting chip discharge amount as conventional products with a lower required power.・ One type of insert enables easy tool management.・ Ideal for cutting stainless steel, etc.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Side / Groove / Vertical	20 ～ 30	general steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum / Titanium	Rough and medium rough processing	130 ～ 150	3 ～ 5	With handle	20 ～ 25	35 ～ 50	17～35	-

  From: 5,573,262 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  RF4000 Type High-Speed Cutter for Aluminum

  SUMITOMO ELECTRIC HARDMETAL

  A high-performance lightweight cutter capable of roughing to finish machining of non-ferrous metals including aluminum alloys.[Features]・ From roughing to finishing: Cost effective rough machining with carbide inserts / high-precision finish machining with SUMIDIA.・ Robust lightweight body: Special aluminum alloy increases strength / weight reduction to approx. 40% of steel body / rigid-anodized surface / improved efficiency in higher rotational speeds, lower spindle loads and shorter tool change time.・ Safe design: It prevents scattering of parts and inserts due to centrifugal force / It is designed to prevent deformation without the use of wedge structure.・ Easy blade runout adjustment: External setting structure enables easy presetting / high-precision design secures blade runout within 10 μm simply by mounting the unit.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane	80 ～ 200	Aluminum	Rough and medium rough processing	-	6 ～ 12	Arbor	-	-	3 (When using Sumidia Indexable Inserts), 10 (When using super hard tip)	-

  From: 33,308,755 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-Wave Repeater for WRX Type, WRX-R (S)

  SUMITOMO ELECTRIC HARDMETAL

  Optimizes cutting edge placement to realize low resistance and low vibration machining. Smooth chip discharge and high body rigidity are made possible by the lead and special pocket shape.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Side / Groove	50 ～ 100	general steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum / Titanium	Rough and medium rough processing	-	8 ～ 24	Arbor	-	-	27 ～ 53	-

  From: 15,921,105 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Full Cut Mill FCR Type Straight Shank Type

  BIG DAISHOWA SEIKI

  [Features]· A highly versatile straight shank type. Combination with the MEGA Double Power Chuck enables comfortable work.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Side / Groove / Plunging (Z feed)	17 ～ 33	-	-	120 ～ 180	2 ～ 3	With handle	16 ～ 32	25 ～ 48	-	-

  From: 6,088,274 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  PSE BORE Phoenix Series Shoulder Milling Cutter Bore Type

  OSG

  The employment of this high-precision insert achieves excellent bottom surface roughness. Due to the effect of the bottom notch, cutting chips are split into 2 during ramping and helical milling, which suppresses chip biting and entanglement, enabling smooth milling.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Side / Groove / Vertical	-	-	-	-	3 ～ 11	-	-	-	-	-

  From: 8,192,583 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CERATIZIT MaxiMill 274 Milling Cutter

  OSG

  [Specifications]・ Shape: Cutter・ Indexable end mill[Applications]Plane, groove, chamfer

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Groove / Chamfer	18.9 ～ 123.7	general steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum / Titanium	Rough to Finish Processing	40$40.7 ～ 98.7	3 ～ 12	With handle / Arbor	20 ～ 25	25.7 ～ 40.7	-	Carbide Coat

  From: 9,116,718 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  ALUMINIUM FACE MILL CUTTER

  EXPOWER

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  -	-	-	-	-	-	-	-	-	-	-

  From: 4,325,112 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s)

  4 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  京セラ 溝入れ用ホルダ

  KYOCERA

  【特長】・KGDF-Z型：Wグリップ(チップ横ずれ防止を防止機構)の採用で安定加工を実現。一体型ホルダで高剛性。【用途】・端面溝入れホルダ【商品仕様】・幅(mm)：50・適合チップ：GDFM/GDFMS・奥行(mm)：360・溝幅(mm)：4.0・高さ(mm)：50・一体型・JANコード：4960664696147・トラスココード：825-0071

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  -	-	-	-	-	-	-	-	-	-	-

  From: 6,023,209 VND
  Days to Ship: Số ngày giao hàng: 12 Day(s)

  12 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Milling holder SPK PFK type

  KYOCERA

  【特長】・PFK型【用途】・SPKセラミック工具用ホルダ・フェースミル・荒加工用【商品仕様】・適合チップ：SN○○1204・コーナ角：88°・インロー部：ミリ仕様・JANコード：4960664671359・トラスココード：825-0166

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane	50 ～ 125	Cast Iron	Rough and medium rough processing	40 ～ 63	5 ～ 12	Arbor	-	-	-	Ceramic / CBN

  From: 16,285,099 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Chamfer Cutter

  MIREAPO

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  -	-	-	-	150	-	-	-	-	-	-

  From: 1,011,846 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Body For HPC Series Cutter For Aluminum Parts Machining

  NGK SPARK PLUG

  [Features]· A wide selection - ø20 to 100 are available as standard· Common inserts - the same inserts can be used between the HPC series and the ALWC series· High rigidity - a high level of reliability is achieved by utilizing a steel body

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  -	-	-	-	100 ～ 125	-	-	ø20 ～ ø32	-	-	-

  From: 15,577,008 VND
  Days to Ship: Số ngày giao hàng: 14 Day(s) or more

  14 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Phoenix Series Face Milling Cutter, Square, Bore Type

  OSG

  [Features]・ OSG Phoenix Series・ Suitable for milling machine.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane	50 ～ 125	general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron	-	45 ～ 63	4 ～ 8	Arbor	-	-	-	Carbide Coat

  From: 13,434,766 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  NEW Nice Cut (NS Type)

  FUJIGEN

  [Features]· It has undergone innovative evolution. 2 types, a 3-flute type and a 6-flute type, also support high speed cutting.· Machining diameter can be changed by exchanging the base; machining type can be changed by exchanging the arm.· Multi-structure supports 3 types: NS (negative S type), PS (positive S type), NT (negative T type)

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Side	100 ～ 150	general steel / Stainless Steel / Aluminum / Resin	Finishing	120 ～ 123.5	3 ～ 6	With handle	-	-	-	Carbide Coat / No Carbide Coat / Cermet / Diamond (PCD)

  From: 17,862,137 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Shuririn

  FUJIGEN

  With multiple blades, high feed and high-speed cutting are possible.[Features]· The tip can be selected from three types of nose radius (R0.2, R0.4, R0.8) and has 4 usable corners to reduce cost.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Side	20 ～ 50	general steel / Stainless Steel / Aluminum / Resin	Finishing	100 ～ 105	2 ～ 5	With handle	-	-	-	Carbide Coat / No Carbide Coat / Cermet

  From: 3,964,489 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-Wave Bore (rough machining long blade type), WBMR2000L Type

  SUMITOMO ELECTRIC HARDMETAL

  A sharp, low-resistance, wave blade type with a high rake angle. Strong anti-rotation mechanism suppresses tip movement while cutting.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Groove	20 ～ 50	general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron / Titanium	Rough and medium rough processing	140 ～ 350	-	With handle	25 ～ 50.8	60 ～ 250	30～69	-

  From: 10,004,960 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Aluminum Small Diameter Cutter, SRF Type

  SUMITOMO ELECTRIC HARDMETAL

  [Features]・ The small diameter cutter for aluminum alloys SRF type is a high performance small-sized cutter that is ideal for machining aluminum alloy parts on small-sized machines.・ The simple design of the insert direct-mount method and the simple fine adjustment mechanism ensure the accuracy of flute runout.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Side	30 ～ 63	Aluminum	Rough and medium rough processing	-	3 ～ 6	Arbor	-	-	5	-

  From: 13,779,419 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-DNH 12000 Type, Cast Iron, Cast Steel for High Efficiency Machining

  SUMITOMO ELECTRIC HARDMETAL

  [Features]·A high efficiency cutter for flat surface machining of cast iron and cast steel (general steel, carbon steel, steel alloy).Maximum cutting depth (Ad) (mm): 3cutting diameter D (⌀): 80, 100, 125, 160

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane	80 ～ 160	general steel / Cast Iron	Rough and medium rough processing	-	6 ～ 10	Arbor	-	-	3	-

  From: 13,213,654 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Used for SEC-Ace Mill, FPG Model FPG-R/L

  SUMITOMO ELECTRIC HARDMETAL

  [Features]·Right-handed or left-handed can be selected.·An ace mill for general purposes, slab milling, grooving, and chamfering of difficult-to-cut materials.Maximum cutting depth (Ad) (mm): 5.5

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Groove / Chamfer	80 ～ 315	general steel / Quenched and tempered steel / Stainless Steel / Cast Iron	Rough and medium rough processing	-	4 ～ 14	Arbor	-	-	5.5	-

  From: 11,903,304 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Used for SEC-Wave Mill, WGX Model WGX-EW

  SUMITOMO ELECTRIC HARDMETAL

  [Features]·This product provides an excellent finished surface by improving the runout accuracy of the cutting edge and by using a unique wiper edge shape.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Groove / Chamfer	32 ～ 63	general steel / Quenched and tempered steel / Stainless Steel / Cast Iron	Rough and medium rough processing	125	3 ～ 5	With handle	32	40	6	-

  From: 8,075,535 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Used for SEC-Wave Mill, WGC Model WGC(F)-RS

  SUMITOMO ELECTRIC HARDMETAL

  [Features]·The high precision of the body and inserts allows for high-quality machining.·This product has high sharpness and strength, and a wide variety of insert items can meet a wide range of needs.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Groove / Chamfer	32 ～ 63	general steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum / Titanium	Rough and medium rough processing	-	3 ～ 6	Arbor	-	-	4 ～ 6	-

  From: 5,870,112 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-Wave Mill for WGX Type, WGXF-R(S)

  SUMITOMO ELECTRIC HARDMETAL

  Achieves low resistance with a dedicated chip breaker. For general cutting of steel and cast iron.[Features]・ The high rake chip breaker designed for the WGX type achieves low resistance.・ Achieves an excellent finished surface with improved blade runout accuracy and a unique sweeping blade shape.・ Addition of chamfer suppresses burrs and edge chips.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Groove / Chamfer	50 ～ 250	general steel / Quenched and tempered steel / Stainless Steel / Cast Iron	Rough and medium rough processing	-	5 ～ 24	Arbor	-	-	6	-

  From: 9,983,912 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-Wave Mill for WGX Type, WGXM-R(S)

  SUMITOMO ELECTRIC HARDMETAL

  Achieves low resistance with a dedicated chip breaker. For general cutting of steel and cast iron.[Features]・ The high rake chip breaker designed for the WGX type achieves low resistance.・ Achieves an excellent finished surface with improved blade runout accuracy and a unique sweeping blade shape.・ Addition of chamfer suppresses burrs and edge chips.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Groove / Chamfer	50 ～ 250	general steel / Quenched and tempered steel / Stainless Steel / Cast Iron	Rough and medium rough processing	-	4 ～ 14	Arbor	-	-	6	-

  From: 8,817,561 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

BrandNhãn hiệu
Product SeriesDòng sản phẩm
From
Days to ShipSố ngày giao hàng
Machining Application
blade diameter D(φ)
work material
Finish category
Overall length (L)(mm)
Number of flutes(sheet)
Mounting Method
Shank diameter (d)(mm)
Underneck length (ℓ1)(mm)
Maximum Cutting Depth (Ad)(mm)
Compatible Tip Material

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
BrandNhãn hiệu	SANDVIK	KYOCERA	KYOCERA	KYOCERA	DIJET	KYOCERA	SUMITOMO ELECTRIC HARDMETAL	OSG	SANDVIK	EXPOWER	KYOCERA	KYOCERA	KYOCERA	KYOCERA	OSG	OSG	BIG DAISHOWA SEIKI	BIG DAISHOWA SEIKI	KYOCERA	SANDVIK	KYOCERA	KYOCERA	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	BIG DAISHOWA SEIKI	OSG	OSG	EXPOWER	KYOCERA	KYOCERA	MIREAPO	NGK SPARK PLUG	OSG	FUJIGEN	FUJIGEN	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL
Product SeriesDòng sản phẩm	CoroMill 590 Cutter	MEC Type End Mill	MFH Type High Feed Cutter MFH Mini End Mill	MFWN90 Type Face Mill Holder	Mirror Radius End Mill (Ultra Hard Shank), RNM-S-C Shape	MCSE Type Chamfering End Mill	SEC-Wave Mill for WGX Type, WGX-R(S)	Phoenix Face Milling Cutter, 4-Corner Shoulder Mill Cutting Bore Type	CoroMill 390 End Mill Threaded-Type Coupling R390-T	MULTI CHAMFER TOOL	Holder for internal machining C-STLB-AN type	METS Type T-Slot Mill	MECH Type End Mill (With Coolant Holes at Tip Blade)	Milling holder SPK PEK type	PSE SS Phoenix Series Shoulder Milling Cutter Straight Shank Type	PHC BORE Phoenix Series High Feed Radius Cutter Bore Type	Full Cut Mill (FCM type Long)	Full Cut Mill FCM Type Straight Shank Type	MEW Type End Mill Holder	CoroMill 245 Cutter	京セラ ミーリング用ホルダ SPK	MEF Type Counterbore End Mill	SEC-Wave Mill WEX2000F Type	SEC-Wave Multifunctional, Standard Type WMM2000E	RF4000 Type High-Speed Cutter for Aluminum	SEC-Wave Repeater for WRX Type, WRX-R (S)	Full Cut Mill FCR Type Straight Shank Type	PSE BORE Phoenix Series Shoulder Milling Cutter Bore Type	CERATIZIT MaxiMill 274 Milling Cutter	ALUMINIUM FACE MILL CUTTER	京セラ 溝入れ用ホルダ	Milling holder SPK PFK type	Chamfer Cutter	Body For HPC Series Cutter For Aluminum Parts Machining	Phoenix Series Face Milling Cutter, Square, Bore Type	NEW Nice Cut (NS Type)	Shuririn	SEC-Wave Bore (rough machining long blade type), WBMR2000L Type	Aluminum Small Diameter Cutter, SRF Type	SEC-DNH 12000 Type, Cast Iron, Cast Steel for High Efficiency Machining	Used for SEC-Ace Mill, FPG Model FPG-R/L	Used for SEC-Wave Mill, WGX Model WGX-EW	Used for SEC-Wave Mill, WGC Model WGC(F)-RS	SEC-Wave Mill for WGX Type, WGXF-R(S)	SEC-Wave Mill for WGX Type, WGXM-R(S)
From	30,615,236 VND	4,130,914 VND	5,572,296 VND	10,839,052 VND	6,992,594 VND	2,622,468 VND	7,227,280 VND	13,359,813 VND	10,338,223 VND	1,624,395 VND	7,202,044 VND	6,277,518 VND	13,301,784 VND	19,848,255 VND	6,288,141 VND	9,704,373 VND	6,849,906 VND	4,494,058 VND	5,387,165 VND	17,328,952 VND	18,422,992 VND	3,786,458 VND	12,273,924 VND	5,573,262 VND	33,308,755 VND	15,921,105 VND	6,088,274 VND	8,192,583 VND	9,116,718 VND	4,325,112 VND	6,023,209 VND	16,285,099 VND	1,011,846 VND	15,577,008 VND	13,434,766 VND	17,862,137 VND	3,964,489 VND	10,004,960 VND	13,779,419 VND	13,213,654 VND	11,903,304 VND	8,075,535 VND	5,870,112 VND	9,983,912 VND	8,817,561 VND
Days to ShipSố ngày giao hàng	8 Day(s) or more	6 Day(s) or more	6 Day(s) or more	7 Day(s) or more	6 Day(s) or more	8 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	5 Day(s)	9 Day(s) or more	8 Day(s) or more	8 Day(s) or more	9 Day(s) or more	6 Day(s) or more	6 Day(s) or more	8 Day(s) or more	6 Day(s) or more	7 Day(s) or more	6 Day(s) or more	12 Day(s)	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	8 Day(s) or more	6 Day(s) or more	6 Day(s) or more	4 Day(s)	12 Day(s)	9 Day(s) or more	4 Day(s) or more	14 Day(s) or more	6 Day(s) or more	6 Day(s) or more	9 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	9 Day(s)	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more
Machining Application	Plane / Side	Plane / Side / Groove	-	Plane / Side / Groove / Vertical	Plane / Side / Groove / Vertical	Groove / Chamfer	Plane / Groove / Chamfer	Plane / Side / Groove	Plane / Side / Groove	-	-	Groove	Plane / Side / Groove	Plane	Plane / Side / Groove	Plane / Side / Groove / Vertical	Side / Groove	Plane / Side / Groove	Plane / Side / Groove / Vertical	Plane	-	Plane / Side	Plane / Side / Groove	Plane / Side / Groove / Vertical	Plane	Plane / Side / Groove	Plane / Side / Groove / Plunging (Z feed)	Plane / Side / Groove / Vertical	Plane / Groove / Chamfer	-	-	Plane	-	-	Plane	Plane / Side	Plane / Side	Groove	Plane / Side	Plane	Plane / Groove / Chamfer	Plane / Groove / Chamfer	Plane / Groove / Chamfer	Plane / Groove / Chamfer	Plane / Groove / Chamfer
blade diameter D(φ)	63mm ～ 160mm	10 ～ 50	16 ～ 32	-	6 ～ 25	-	40 ～ 250	50 ～ 80	16 ～ 42	-	-	-	25 ～ 50	63 ～ 100	16 ～ 63	23.4 ～ 83.4	16 ～ 32	12 ～ 50	16 ～ 50	62.5mm ～ 268.8mm	-	-	40 ～ 63	20 ～ 30	80 ～ 200	50 ～ 100	17 ～ 33	-	18.9 ～ 123.7	-	-	50 ～ 125	-	-	50 ～ 125	100 ～ 150	20 ～ 50	20 ～ 50	30 ～ 63	80 ～ 160	80 ～ 315	32 ～ 63	32 ～ 63	50 ～ 250	50 ～ 250
work material	Quenched and tempered steel / high hardness steel / Cast Iron / Aluminum / Copper	-	general steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Titanium	-	general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron	-	general steel / Quenched and tempered steel / Stainless Steel / Cast Iron	-	general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron / Aluminum / Titanium / Copper	-	-	-	-	Cast Iron	general steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum / Titanium	general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron / Titanium	-	-	-	general steel / Stainless Steel / Cast Iron	-	-	general steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum / Titanium	general steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum / Titanium	Aluminum	general steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum / Titanium	-	-	general steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum / Titanium	-	-	Cast Iron	-	-	general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron	general steel / Stainless Steel / Aluminum / Resin	general steel / Stainless Steel / Aluminum / Resin	general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron / Titanium	Aluminum	general steel / Cast Iron	general steel / Quenched and tempered steel / Stainless Steel / Cast Iron	general steel / Quenched and tempered steel / Stainless Steel / Cast Iron	general steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum / Titanium	general steel / Quenched and tempered steel / Stainless Steel / Cast Iron	general steel / Quenched and tempered steel / Stainless Steel / Cast Iron
Finish category	Finishing	-	-	-	-	-	Rough and medium rough processing	-	Rough and medium rough processing / Finishing	-	-	-	-	Finishing	-	-	-	-	-	Finishing	-	-	Rough and medium rough processing	Rough and medium rough processing	Rough and medium rough processing	Rough and medium rough processing	-	-	Rough to Finish Processing	-	-	Rough and medium rough processing	-	-	-	Finishing	Finishing	Rough and medium rough processing	Rough and medium rough processing	Rough and medium rough processing	Rough and medium rough processing	Rough and medium rough processing	Rough and medium rough processing	Rough and medium rough processing	Rough and medium rough processing
Overall length (L)(mm)	40 ～ 63	80 ～ 250	79 ～ 200	-	80 ～ 250	85 ～ 120	-	40 ～ 50	-	-	-	109 ～ 140	120 ～ 185	40 ～ 50	90 ～ 190	40 ～ 63	-	90 ～ 180	100 ～ 170	-	-	103 ～ 176	-	130 ～ 150	-	-	120 ～ 180	-	40$40.7 ～ 98.7	-	-	40 ～ 63	150	100 ～ 125	45 ～ 63	120 ～ 123.5	100 ～ 105	140 ～ 350	-	-	-	125	-	-	-
Number of flutes(sheet)	5 ～ 10	1 ～ 5	2 ～ 6	3 ～ 18	-	1 ～ 3	3 ～ 10	3 ～ 9	2 ～ 4	-	-	2 ～ 4	8 ～ 42	6 ～ 10	2 ～ 6	3 ～ 8	2	1 ～ 5	2 ～ 5	4 ～ 12	-	1 ～ 4	-	3 ～ 5	6 ～ 12	8 ～ 24	2 ～ 3	3 ～ 11	3 ～ 12	-	-	5 ～ 12	-	-	4 ～ 8	3 ～ 6	2 ～ 5	-	3 ～ 6	6 ～ 10	4 ～ 14	3 ～ 5	3 ～ 6	5 ～ 24	4 ～ 14
Mounting Method	Arbor	-	With handle	-	With handle	-	Arbor	Arbor	Centering Plug	-	-	-	-	Arbor	With handle	Arbor	With handle	With handle	-	Arbor	-	-	Arbor	With handle	Arbor	Arbor	With handle	-	With handle / Arbor	-	-	Arbor	-	-	Arbor	With handle	With handle	With handle	Arbor	Arbor	Arbor	With handle	Arbor	Arbor	Arbor
Shank diameter (d)(mm)	22 ～ 40	10 ～ 32	16 ～ 32	-	6 ～ 25	16 ～ 32	-	-	8 ～ 16	-	-	25 ～ 32	25 ～ 42	-	16 ～ 32	-	-	16 ～ 32	12 ～ 32	22 ～ 50.8	-	10 ～ 32	-	20 ～ 25	-	-	16 ～ 32	-	20 ～ 25	-	-	-	-	ø20 ～ ø32	-	-	-	25 ～ 50.8	-	-	-	32	-	-	-
Underneck length (ℓ1)(mm)	-	-	20 ～ 120	-	30 ～ 170	30 ～ 40	-	-	25 ～ 45	-	-	29 ～ 60	-	-	25 ～ 90	-	45 ～ 90	15 ～ 48	-	-	-	23 ～ 96	-	35 ～ 50	-	-	25 ～ 48	-	25.7 ～ 40.7	-	-	-	-	-	-	-	-	60 ～ 250	-	-	-	40	-	-	-
Maximum Cutting Depth (Ad)(mm)	-	-	-	-	-	-	6	-	10	-	-	-	-	-	-	-	-	-	-	6 ～ 10	-	-	10	17～35	3 (When using Sumidia Indexable Inserts), 10 (When using super hard tip)	27 ～ 53	-	-	-	-	-	-	-	-	-	-	-	30～69	5	3	5.5	6	4 ～ 6	6	6
Compatible Tip Material	Carbide Coat	-	-	-	-	-	-	-	Carbide Coat	-	-	-	-	Ceramic / CBN	Carbide Coat / No Carbide Coat	Carbide Coat	-	-	-	Carbide Coat	-	-	-	-	-	-	-	-	Carbide Coat	-	-	Ceramic / CBN	-	-	Carbide Coat	Carbide Coat / No Carbide Coat / Cermet / Diamond (PCD)	Carbide Coat / No Carbide Coat / Cermet	-	-	-	-	-	-	-	-

Loading...Tải…