Cutters / Indexable End Mills（Machining Application：Side Page3）

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-Wave Multifunctional, Long Type / Air Hole Specification WMM2000ELH

  SUMITOMO ELECTRIC HARDMETAL

  Enables shoulder cutting and groove cutting with a single unit, as well as plunging. Ideal for high efficiency slope milling, helical drilling, and pocket machining.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Side	20 ～ 30	general steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum / Titanium	Rough and medium rough processing	185 ～ 230	3 ～ 5	With handle	20 ～ 25	35 ～ 75	17 ～ 35	-

  From: 8,096,584 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-Wave Multifunctional, Long Type WMM3000EL

  SUMITOMO ELECTRIC HARDMETAL

  [Features]・ Enables shoulder milling, grooving, and drilling with a single WMM type.・ Ideal for high efficiency ramping, helical drilling, and pocket machining.・ Use of a wave mill insert achieves both cutting performance and cutting edge strength.・ Reduced cutting force realizes the same cutting chip discharge amount as conventional products with a lower required power.・ One type of insert enables easy tool management.・ Ideal for cutting stainless steel, etc.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Side	32 ～ 40	general steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum / Titanium	Rough and medium rough processing	230 ～ 240	4	With handle	32	50 ～ 90	39	-

  From: 7,036,462 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-Wave Multifunctional, Long Type / Air Hole Specification WMM3000ELH

  SUMITOMO ELECTRIC HARDMETAL

  Enables shoulder cutting and groove cutting with a single unit, as well as plunging. Ideal for high efficiency slope milling, helical drilling, and pocket machining.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Side	32 ～ 40	general steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum / Titanium	Rough and medium rough processing	230 ～ 240	4	With handle	32	50 ～ 90	39	-

  From: 9,156,902 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Full Cut Mill (FCM type Long)

  BIG DAISHOWA SEIKI

  [Features]· It is comparable to a sharp and tough solid end mill. Throw-away end mill cutter. Low resistance and high efficiency cutter dedicated for lateral feed processing.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Side	16 ～ 32	-	-	-	2	With handle	-	45 ～ 90	-	-

  From: 6,849,906 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Full Cut Mill (FCR type Long)

  BIG DAISHOWA SEIKI

  [Features]· Dual face contact integrated type provides even higher rigidity. Tip with enhanced rigidity, allowing tough and stable ramping

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Side	16 ～ 32	-	-	-	2	With handle	-	45 ～ 90	-	-

  From: 6,849,906 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Full Cut Mill FCR Type Straight Shank Type

  BIG DAISHOWA SEIKI

  [Features]· A highly versatile straight shank type. Combination with the MEGA Double Power Chuck enables comfortable work.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Side	17 ～ 33	-	-	120 ～ 180	2 ～ 3	With handle	16 ～ 32	25 ～ 48	-	-

  From: 6,088,274 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MWH Wonder Ball End Mill MX30 Holder

  ASAHI TOOLS

  Twin head insert. * Using minimal insert material and a multilayer AX coating, cost reductions per corner are achieved, enabling a long working life and high precision machining.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Side	10 ～ 30	general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron / Aluminum / Copper	-	130 ～ 240	-	With handle	16 ～ 32	-	-	-

  From: 4,398,453 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SHE Shell End Mill G2

  ASAHI TOOLS

  Used by attaching an EM body (blade part) with a large diameter of φ50-125 onto the arbor

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Side	50 ～ 100	general steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum / Copper / Resin	-	-	6 ～ 10	Arbor	-	-	-	-

  From: 9,977,326 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Shell End Mill for MCS, MC G2

  ASAHI TOOLS

  Used by attaching an EM body (blade part) with a large diameter of φ50-100 onto the arbor

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Side	50 ～ 100	general steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum / Copper / Resin	-	60 ～ 110	6 ～ 10	Arbor	-	-	-	-

  From: 12,957,455 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  PSE BORE Phoenix Series Shoulder Milling Cutter Bore Type

  OSG

  The employment of this high-precision insert achieves excellent bottom surface roughness. Due to the effect of the bottom notch, cutting chips are split into 2 during ramping and helical milling, which suppresses chip biting and entanglement, enabling smooth milling.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Side	-	-	-	-	3 ～ 11	-	-	-	-	-

  From: 8,192,583 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Aero Chipper ALX Model Bore Type Milling Cutter

  DIJET

  [Features]· It is a tool with excellent abrasion resistance.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Side	50 ～ 63	general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron / Titanium / Copper	-	-	4 ～ 5	Arbor	-	-	-	-

  From: 19,264,758 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Side Chipper (Shank Type Mill) SIC Type - Medium Type

  DIJET

  [Features]· It is a tool with excellent abrasion resistance.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Side	20 ～ 50	general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron / Titanium / Copper	-	110 ～ 150	-	With handle	20 ～ 32	25 ～ 40	-	-

  From: 7,782,900 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Swing Ball SWB Type G-Body Series

  DIJET

  [Features]· Tool with excellent wear-resistance

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Side	40 ～ 50	-	-	200 ～ 250	-	With handle	50.8	100 ～ 150	-	-

  From: 19,440,458 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Swing Mill DSM-EC-BT Type

  DIJET

  [Features]· BT50 Shank· End cap replaceable type· Long Blade for Deep Cutting[Applications]· For Shoulder Milling

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Side	50 ～ 63	general steel / Cast Iron	-	266.8 ～ 331.8	20 ～ 26	With handle	-	-	66 ～ 127	-

  From: 46,926,664 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Super End Chipper SEC Type - Standard Type, Medium-Long Type

  DIJET

  Multifunctional tool capable of three-dimensional cutting, including hole drilling and end milling, all performed with a single tool.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Side	16 ～ 40	general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron / Titanium / Copper	-	130 ～ 160	-	With handle	16 ～ 32	50 ～ 70	-	-

  From: 7,814,375 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  New Back-and-Forth Cutter PFC Type

  DIJET

  [Features]· With Coolant Hole[Applications]· For finishing, reciprocation and vertical wall processing

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Side	50 ～ 63	general steel / Cast Iron	Finishing	-	4 ～ 6	Arbor	22	-	-	Carbide Coat

  From: 17,372,791 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MEW Type Head

  KYOCERA

  Be aware that chips or parts may scatter due to centrifugal force if accidentally rotating at the maximum rotation speed or higher.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Side	-	-	-	43 ～ 63	2 ～ 4	-	-	-	-	-

  From: 5,387,165 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  BT Arbor for Modular End Mills (Head Replacement / Two-face Clamping Spindle Compatible)

  KYOCERA

  [Features]·Right-handed.·This product is capable of face milling.·The notched insert reduces and disperses cutting force during compression, and suppresses chattering, enabling high feed.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Side	-	-	-	-	-	-	-	-	-	-

  From: 10,491,841 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MFWN90 Type Face Mill Holder

  KYOCERA

  MFWN90 type face mill[Features]·Good sharpness with low resistance·Resistant to chatter·Thick wall design with excellent chipping resistance, neutral insert·Long life with new technology MEGACOAT NANO·A lineup of 5 chipbreakers for different machining applications

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Side	-	-	-	-	3 ～ 18	-	-	-	-	-

  From: 10,839,052 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MFWN90 Type End Mill (With Coolant Holes at Tip Blade)

  KYOCERA

  The seizing prevention agent (MP-1) should be applied in a thin layer to the taper and threading of the clamp screw when fixing an insert.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Side	50 ～ 80	-	-	110	3 ～ 5	-	32	-	-	-

  From: 7,817,045 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MEC Type Head

  KYOCERA

  [Features]·This product has a smooth machined surface with low cutting force and supports even more diverse machining with by adding a insert material and holder repertoire.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Side	16 ～ 32	-	-	43 ～ 63	2 ～ 4	-	-	-	-	-

  From: 5,387,165 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MECX Type End Mill

  KYOCERA

  [Features]·The low cutting force and high strength are suitable for compact machines.·The general-purpose JT chip breaker and low-cutting force JS chip breaker cover a wide range of cutting areas.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Side	8 ～ 33	-	-	80 ～ 160	1 ～ 8	-	10 ～ 32	-	-	-

  From: 4,130,914 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MECX Type Face Mill

  KYOCERA

  Shoulder grinding, groove cutting, and plane surface grinding are all possible.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Side	-	-	-	-	8 ～ 10	-	-	-	-	-

  From: 12,872,935 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MEWH Type End Mill (With Coolant Holes at Tip Blade)

  KYOCERA

  Holder design makes use of the MEW type characteristics to achieve a good machining surface and stable machining.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Side	25 ～ 50	-	-	120 ～ 160	6 ～ 15	-	25 ～ 42	-	-	-

  From: 13,309,653 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Cutter for Heavy Cutting, Model MSR

  KYOCERA

  The seizing prevention agent (MP-1) should be applied in a thin layer to the taper and threading of the clamp screw when fixing an insert.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Side	-	-	-	-	4 ～ 32	-	-	-	-	-

  From: 22,674,291 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Slot Mill Horizontal Installation Specification without Boss

  KYOCERA

  This slot mill has two keyways to allow use with 2 or more combined.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Side	-	-	-	-	6 ～ 10	-	-	-	-	-

  From: 43,603,877 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Slot Mill Horizontal Installation Specification with Boss

  KYOCERA

  This slot mill has two keyways to allow use with 2 or more combined.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Side	-	-	-	-	6 ～ 10	-	-	-	-	-

  From: 45,135,339 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Half Side Slot Mill without Hub Right-Hand

  KYOCERA

  [Features]·A right-handed groove width adjustable type.·A screw clamp system (horizontal)

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Side	-	-	-	-	6 ～ 10	-	-	-	-	-

  From: 43,603,877 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Half Side Slot Mill with Hub Right Hand

  KYOCERA

  Half-Side Slot Mill for Shoulder Grinding

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Side	-	-	-	-	6 ～ 10	-	-	-	-	-

  From: 45,135,339 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroMill 365 Cutter

  SANDVIK

  Suitable for high-efficiency machining.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Side	69.7mm ～ 166.7mm	general steel / Quenched and tempered steel / high hardness steel / Cast Iron	Rough and medium rough processing	-	6 ～ 18	Arbor	22 ～ 50.8	-	6	Carbide Coat

  From: 19,078,384 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroMill 490 Cutter

  SANDVIK

  Suitable for high-efficiency machining.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Side	40mm ～ 250mm	general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron / Aluminum / Titanium / Copper / Graphite / Resin	Rough and medium rough processing / Finishing	-	4 ～ 16	Arbor	16 ～ 60	-	5.5 ～ 10	Carbide Coat

  From: 15,916,196 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MRW Type Face Mill

  KYOCERA

  Be aware that chips or parts may scatter due to centrifugal force if accidentally rotating at the maximum rotation speed or higher.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Side	-	-	-	-	5 ～ 10	-	-	-	-	-

  From: 10,920,690 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  PSEL SS Phoenix Series Roughing End Mill Straight Shank Type

  OSG

  [Specifications]・ Shape: Cutter・ Indexable end mill[Applications]Plane, side, groove

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Side	25 ～ 50	-	-	125 ～ 144	2 ～ 4	With handle	25 ～ 42	50 ～ 64	-	-

  From: 21,766,321 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  PSEL BORE Phoenix Series Roughing End Mill Bore Type

  OSG

  [Specifications]· Shape: Cutter· Blade Tip Replacement Type End Mill[Applications] Flat surfaces, side surfaces, grooves

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Side	50 ～ 80	-	-	74 ～ 88	3 ～ 4	Arbor	-	-	-	-

  From: 32,722,673 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Phoenix Face Milling Cutter, 4-Corner Shoulder Mill Cutting Bore Type

  OSG

  [Features]· OSG Phoenix Series· A straight shank type.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Side	50 ～ 80	-	-	40 ～ 50	3 ～ 9	Arbor	-	-	-	-

  From: 13,359,813 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  コロミル３９０カッター/エンドミルおよび肩削りカッター

  SANDVIK

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Side	36 mm	general steel / Stainless Steel / Cast Iron / Aluminum / Titanium / Copper / Graphite	Rough and medium rough processing	-	3	Centering Plug	-	75	10	Carbide Coat / No Carbide Coat / Cermet

  From: 16,344,180 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Long-Edge Cutter Arbor Mounting HSK

  SANDVIK

  Long edge cutter for titanium alloy machining[Features]Is the chip iLock?Reliable fixation thanks to technology

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Side	50 ～ 80	Titanium	Finishing	75 ～ 98	12/2 ～ 18/3	Arbor	22 ～ 32	55 ～ 68	46 ～ 61	No Carbide Coat

  From: 36,808,148 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Swing Ball SWB Type Long Shank Type / Combination Type

  DIJET

  [Specifications]· Mounting Method: Type with Handle· Type: Combination Shank[Applications] Curved-surface Machining

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Side	40 ～ 50	-	-	220 ～ 350	-	With handle	50.8	170	-	-

  From: 14,806,112 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Aero Chipper ALX Model Shank Type Milling Cutter

  DIJET

  [Specifications]· Mounting Method: Type with Handle· Compatible Tip: XOGT1605○○PD○R· Work materials: General steel, tempered steel, high hardness steel, stainless steel, cast iron[Applications] Side Surfaces / Grooves / Vertical

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Side	20 ～ 40	general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron	-	110 ～ 170	1 ～ 3	With handle	20 ～ 32	35 ～ 80	-	-

  From: 9,559,425 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Super End Chipper SEC Type - Long, Extra Long, MT Shank, Weldon Shank Type

  DIJET

  [Features]· One unit accomplishes all kinds of tasks incredibly well.· Multifunctional tool capable of three-dimensional cutting, including hole drilling and end milling, all performed with a single tool.· Uses a 3D tip for excellent cutting performance and chip disposal, allowing high efficiency machining to be performed.· Highly reliable cutter geometry and new JC5015 and JC5040 material combination makes it difficult to break, providing a long life

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Side	16 ～ 50	general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron / Titanium / Copper	-	180 ～ 350	-	With handle	16 ～ 42	40 ～ 90	-	-

  From: 8,579,326 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Side Chipper (Shank Type Mill) SIC Type - Long Type

  DIJET

  [Specifications]· Mounting Method: Type with Handle· Work materials: General steel, tempered steel, high hardness steel, stainless steel, cast iron, titanium, copper[Applications] Flat Surfaces / Side Surfaces / Grooves

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Side	16 ～ 50	general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron / Titanium / Copper	-	150 ～ 250	-	With handle	16 ～ 42	25 ～ 65	-	-

  From: 9,439,501 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Throw-Away End Mill, Diameter 12 to 40 mm, R216.2

  SANDVIK

  Shoulder milling cutter for a highly productive, efficient and reliable machining solution

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Side	12 ～ 32	general steel / Stainless Steel	Finishing	73 ～ 100	1 ～ 2	With handle	16 ～ 32	20 ～ 40.3	8 ～ 15	-

  From: 9,550,163 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  U-Max Drill End Mill Diameter 12 To 40 mm Coarse Pitch (Few Blades) R216.2

  SANDVIK

  Shoulder milling cutter for a highly productive, efficient and reliable machining solution

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Side	20 ～ 32	general steel / Stainless Steel	Finishing	115 ～ 130	1 ～ 2	With handle	20 ～ 32	39.7 ～ 39.9	15	-

  From: 10,166,906 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  End Mill & Shoulder Cutter, Diameter: 20-84 mm Coromant Capto 490-C

  SANDVIK

  Shoulder face milling cutter with amazing performance● Wide range of applicationsCapable of face milling, shoulder milling, grooving and contouringImproved proximity with the introduction of an oversized cutter● Amazing productivityAchieves high cutting conditions with a highly rigid bodyHigh insert mounting rigidity due to flat insert seat● Outstanding machining accuracyLow resistance and high accuracy due to sharp tipBoth the bottom and sides are processed with high precision●GC4330, GC4340CVD grade for steel milling, ideal for versatile CoroMill® 490The Inveio coating provides excellent abrasion resistance and long tool lifespan

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Side	20 ～ 100	general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron / Aluminum / Titanium / Copper / Graphite / Resin	Rough and medium rough processing / Finishing	-	2 ～ 10	Centering Plug	-	23 ～ 70	5.5 ～ 10	-

  From: 12,409,955 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  End Mill And Shoulder Cutter Diameter 40 To 84 mm Coromant Capto R390-C-18

  SANDVIK

  ● When in doubt, use this tool. Wide range of compatible applications and high performanceTool diameter: ø9.7 to 200 mm, Maximum cutting depth: Up to 71 mmCylindrical shank, arbor mounting, anti-vibration type, lightweight type with additive manufacturingSupports all types of machining processes and work materials with 17 long edge grades and 24 breakers● 20% lower power than conventional productsThe energy saving cutter contributes to power savingEasy to use even on compact machines● Supports face milling machine, shoulder milling, helical machining, and plunge machiningA versatile cutter that can do everything with just one unit, for which tailor-made (semi-standard product) is also available with short delivery times●GC4330, GC4340The steel-machining CVD grade is ideal for the versatile CoroMill 390The Inveio coating provides excellent abrasion resistance and long tool lifespan

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Side	40 ～ 84	general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron / Aluminum / Titanium / Copper	Rough and medium rough processing	-	3 ～ 6	Centering Plug	-	38 ～ 100	15.4	Carbide Coat

  From: 14,117,848 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

BrandNhãn hiệu
Product SeriesDòng sản phẩm
From
Days to ShipSố ngày giao hàng
Machining Application
blade diameter D(φ)
work material
Finish category
Overall length (L)(mm)
Number of flutes(sheet)
Mounting Method
Shank diameter (d)(mm)
Underneck length (ℓ1)(mm)
Maximum Cutting Depth (Ad)(mm)
Compatible Tip Material

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
BrandNhãn hiệu	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	BIG DAISHOWA SEIKI	BIG DAISHOWA SEIKI	BIG DAISHOWA SEIKI	ASAHI TOOLS	ASAHI TOOLS	ASAHI TOOLS	OSG	DIJET	DIJET	DIJET	DIJET	DIJET	DIJET	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	SANDVIK	SANDVIK	KYOCERA	OSG	OSG	OSG	SANDVIK	SANDVIK	DIJET	DIJET	DIJET	DIJET	SANDVIK	SANDVIK	SANDVIK	SANDVIK
Product SeriesDòng sản phẩm	SEC-Wave Multifunctional, Long Type / Air Hole Specification WMM2000ELH	SEC-Wave Multifunctional, Long Type WMM3000EL	SEC-Wave Multifunctional, Long Type / Air Hole Specification WMM3000ELH	Full Cut Mill (FCM type Long)	Full Cut Mill (FCR type Long)	Full Cut Mill FCR Type Straight Shank Type	MWH Wonder Ball End Mill MX30 Holder	SHE Shell End Mill G2	Shell End Mill for MCS, MC G2	PSE BORE Phoenix Series Shoulder Milling Cutter Bore Type	Aero Chipper ALX Model Bore Type Milling Cutter	Side Chipper (Shank Type Mill) SIC Type - Medium Type	Swing Ball SWB Type G-Body Series	Swing Mill DSM-EC-BT Type	Super End Chipper SEC Type - Standard Type, Medium-Long Type	New Back-and-Forth Cutter PFC Type	MEW Type Head	BT Arbor for Modular End Mills (Head Replacement / Two-face Clamping Spindle Compatible)	MFWN90 Type Face Mill Holder	MFWN90 Type End Mill (With Coolant Holes at Tip Blade)	MEC Type Head	MECX Type End Mill	MECX Type Face Mill	MEWH Type End Mill (With Coolant Holes at Tip Blade)	Cutter for Heavy Cutting, Model MSR	Slot Mill Horizontal Installation Specification without Boss	Slot Mill Horizontal Installation Specification with Boss	Half Side Slot Mill without Hub Right-Hand	Half Side Slot Mill with Hub Right Hand	CoroMill 365 Cutter	CoroMill 490 Cutter	MRW Type Face Mill	PSEL SS Phoenix Series Roughing End Mill Straight Shank Type	PSEL BORE Phoenix Series Roughing End Mill Bore Type	Phoenix Face Milling Cutter, 4-Corner Shoulder Mill Cutting Bore Type	コロミル３９０カッター/エンドミルおよび肩削りカッター	Long-Edge Cutter Arbor Mounting HSK	Swing Ball SWB Type Long Shank Type / Combination Type	Aero Chipper ALX Model Shank Type Milling Cutter	Super End Chipper SEC Type - Long, Extra Long, MT Shank, Weldon Shank Type	Side Chipper (Shank Type Mill) SIC Type - Long Type	Throw-Away End Mill, Diameter 12 to 40 mm, R216.2	U-Max Drill End Mill Diameter 12 To 40 mm Coarse Pitch (Few Blades) R216.2	End Mill & Shoulder Cutter, Diameter: 20-84 mm Coromant Capto 490-C	End Mill And Shoulder Cutter Diameter 40 To 84 mm Coromant Capto R390-C-18
From	8,096,584 VND	7,036,462 VND	9,156,902 VND	6,849,906 VND	6,849,906 VND	6,088,274 VND	4,398,453 VND	9,977,326 VND	12,957,455 VND	8,192,583 VND	19,264,758 VND	7,782,900 VND	19,440,458 VND	46,926,664 VND	7,814,375 VND	17,372,791 VND	5,387,165 VND	10,491,841 VND	10,839,052 VND	7,817,045 VND	5,387,165 VND	4,130,914 VND	12,872,935 VND	13,309,653 VND	22,674,291 VND	43,603,877 VND	45,135,339 VND	43,603,877 VND	45,135,339 VND	19,078,384 VND	15,916,196 VND	10,920,690 VND	21,766,321 VND	32,722,673 VND	13,359,813 VND	16,344,180 VND	36,808,148 VND	14,806,112 VND	9,559,425 VND	8,579,326 VND	9,439,501 VND	9,550,163 VND	10,166,906 VND	12,409,955 VND	14,117,848 VND
Days to ShipSố ngày giao hàng	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	9 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	7 Day(s) or more	8 Day(s) or more	8 Day(s) or more	7 Day(s) or more	8 Day(s) or more	6 Day(s) or more	7 Day(s) or more	9 Day(s) or more	7 Day(s) or more	8 Day(s) or more	9 Day(s) or more	6 Day(s) or more	9 Day(s) or more	9 Day(s) or more	8 Day(s) or more	9 Day(s) or more	9 Day(s) or more	9 Day(s) or more	9 Day(s) or more	6 Day(s) or more	6 Day(s) or more	9 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	9 Day(s)	6 Day(s) or more	8 Day(s) or more	8 Day(s) or more	6 Day(s) or more	8 Day(s) or more	6 Day(s) or more	8 Day(s) or more	6 Day(s) or more	6 Day(s) or more
Machining Application	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side
blade diameter D(φ)	20 ～ 30	32 ～ 40	32 ～ 40	16 ～ 32	16 ～ 32	17 ～ 33	10 ～ 30	50 ～ 100	50 ～ 100	-	50 ～ 63	20 ～ 50	40 ～ 50	50 ～ 63	16 ～ 40	50 ～ 63	-	-	-	50 ～ 80	16 ～ 32	8 ～ 33	-	25 ～ 50	-	-	-	-	-	69.7mm ～ 166.7mm	40mm ～ 250mm	-	25 ～ 50	50 ～ 80	50 ～ 80	36 mm	50 ～ 80	40 ～ 50	20 ～ 40	16 ～ 50	16 ～ 50	12 ～ 32	20 ～ 32	20 ～ 100	40 ～ 84
work material	general steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum / Titanium	general steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum / Titanium	general steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum / Titanium	-	-	-	general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron / Aluminum / Copper	general steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum / Copper / Resin	general steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum / Copper / Resin	-	general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron / Titanium / Copper	general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron / Titanium / Copper	-	general steel / Cast Iron	general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron / Titanium / Copper	general steel / Cast Iron	-	-	-	-	-	-	-	-	-	-	-	-	-	general steel / Quenched and tempered steel / high hardness steel / Cast Iron	general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron / Aluminum / Titanium / Copper / Graphite / Resin	-	-	-	-	general steel / Stainless Steel / Cast Iron / Aluminum / Titanium / Copper / Graphite	Titanium	-	general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron	general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron / Titanium / Copper	general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron / Titanium / Copper	general steel / Stainless Steel	general steel / Stainless Steel	general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron / Aluminum / Titanium / Copper / Graphite / Resin	general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron / Aluminum / Titanium / Copper
Finish category	Rough and medium rough processing	Rough and medium rough processing	Rough and medium rough processing	-	-	-	-	-	-	-	-	-	-	-	-	Finishing	-	-	-	-	-	-	-	-	-	-	-	-	-	Rough and medium rough processing	Rough and medium rough processing / Finishing	-	-	-	-	Rough and medium rough processing	Finishing	-	-	-	-	Finishing	Finishing	Rough and medium rough processing / Finishing	Rough and medium rough processing
Overall length (L)(mm)	185 ～ 230	230 ～ 240	230 ～ 240	-	-	120 ～ 180	130 ～ 240	-	60 ～ 110	-	-	110 ～ 150	200 ～ 250	266.8 ～ 331.8	130 ～ 160	-	43 ～ 63	-	-	110	43 ～ 63	80 ～ 160	-	120 ～ 160	-	-	-	-	-	-	-	-	125 ～ 144	74 ～ 88	40 ～ 50	-	75 ～ 98	220 ～ 350	110 ～ 170	180 ～ 350	150 ～ 250	73 ～ 100	115 ～ 130	-	-
Number of flutes(sheet)	3 ～ 5	4	4	2	2	2 ～ 3	-	6 ～ 10	6 ～ 10	3 ～ 11	4 ～ 5	-	-	20 ～ 26	-	4 ～ 6	2 ～ 4	-	3 ～ 18	3 ～ 5	2 ～ 4	1 ～ 8	8 ～ 10	6 ～ 15	4 ～ 32	6 ～ 10	6 ～ 10	6 ～ 10	6 ～ 10	6 ～ 18	4 ～ 16	5 ～ 10	2 ～ 4	3 ～ 4	3 ～ 9	3	12/2 ～ 18/3	-	1 ～ 3	-	-	1 ～ 2	1 ～ 2	2 ～ 10	3 ～ 6
Mounting Method	With handle	With handle	With handle	With handle	With handle	With handle	With handle	Arbor	Arbor	-	Arbor	With handle	With handle	With handle	With handle	Arbor	-	-	-	-	-	-	-	-	-	-	-	-	-	Arbor	Arbor	-	With handle	Arbor	Arbor	Centering Plug	Arbor	With handle	With handle	With handle	With handle	With handle	With handle	Centering Plug	Centering Plug
Shank diameter (d)(mm)	20 ～ 25	32	32	-	-	16 ～ 32	16 ～ 32	-	-	-	-	20 ～ 32	50.8	-	16 ～ 32	22	-	-	-	32	-	10 ～ 32	-	25 ～ 42	-	-	-	-	-	22 ～ 50.8	16 ～ 60	-	25 ～ 42	-	-	-	22 ～ 32	50.8	20 ～ 32	16 ～ 42	16 ～ 42	16 ～ 32	20 ～ 32	-	-
Underneck length (ℓ1)(mm)	35 ～ 75	50 ～ 90	50 ～ 90	45 ～ 90	45 ～ 90	25 ～ 48	-	-	-	-	-	25 ～ 40	100 ～ 150	-	50 ～ 70	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	50 ～ 64	-	-	75	55 ～ 68	170	35 ～ 80	40 ～ 90	25 ～ 65	20 ～ 40.3	39.7 ～ 39.9	23 ～ 70	38 ～ 100
Maximum Cutting Depth (Ad)(mm)	17 ～ 35	39	39	-	-	-	-	-	-	-	-	-	-	66 ～ 127	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	6	5.5 ～ 10	-	-	-	-	10	46 ～ 61	-	-	-	-	8 ～ 15	15	5.5 ～ 10	15.4
Compatible Tip Material	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	Carbide Coat	-	-	-	-	-	-	-	-	-	-	-	-	-	Carbide Coat	Carbide Coat	-	-	-	-	Carbide Coat / No Carbide Coat / Cermet	No Carbide Coat	-	-	-	-	-	-	-	Carbide Coat

Loading...Tải…