(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.
Tel: 0222-361-1555
Email: cs@misumi.com.vn
8:00 - 17:00 (Mon - Sat)
Search by Category / Brand Tìm theo danh mục, nhãn hiệu
Search by Category Tìm theo danh mục
- MISUMI Việt Nam đẩy mạnh hợp tác với cơ sở đào tạo nhằm nâng cao chất lượng nguồn nhân lực kỹ sư tương lai. Xem chi tiết.
MISUMI Vietnam cooperates with Training Institutions to enhance the quality of future engineering workforce. See more.
Square HSS End Mills（Base Blade Y/N：Available Page3）
[Misumi's High Speed Steel End Mill]
In addition to the difference in blade length from short size to long size, non-coated items from minimum φ1 to maximum φ50 are available in extensive sizes.
Search by specifying the lower class categoryTìm kiếm bằng cách chỉ định danh mục lớp thấp hơn
Brand |
|
|---|---|
| CAD |
|
| Days to Ship |
|
159 itemsMặt hàng
- Sort By
-
You can add up to 6 items per a category to the compare list.
High-Speed Steel Blade Relief End Mill, 2-Flute / Short Model
MISUMI
[Features]·High-speed steel 2-flute relief shape end mill that can custom dimensions to avoid unwanted tool interference
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 8 ～ 25 - 10 ～ 25 2 60 ～ 120 general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] Plane / Side / Groove / Countersinking TiCN / Non-Coated Square Standard torsion (30-40°) Available Cobalt HSS - - Days to Ship: Số ngày giao hàng: 6 Day(s) or more 
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
High-Speed Steel Blade Relief End Mill, 2-Flute / Regular Model
MISUMI
[Features]·High-speed steel 2-flute relief shape end mill that can custom dimensions to avoid unwanted tool interference
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 8 ～ 25 - 10 ～ 25 2 60 ～ 130 general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] Plane / Side / Groove / Countersinking TiCN / Non-Coated Square Standard torsion (30-40°) Available Cobalt HSS - - Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
High-Speed Steel Blade Relief End Mill, 4-Flute / Short Model
MISUMI
[Features]·High-speed steel 4-flute relief shape end mill that can custom dimensions to avoid unwanted tool interference
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 8 ～ 25 - 10 ～ 25 4 69 ～ 121 general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] Plane / Side / Groove / Countersinking TiCN / Non-Coated Square Standard torsion (30-40°) Available Cobalt HSS - - Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
High-Speed Steel Blade Relief End Mill, 4-Flute / Regular Model
MISUMI
[Features]·High-speed steel 4-flute relief shape end mill that can custom dimensions to avoid unwanted tool interference
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 8 ～ 25 - 10 ～ 25 4 78 ～ 144 general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] Plane / Side / Groove / Countersinking TiCN / Non-Coated Square Standard torsion (30-40°) Available Cobalt HSS - - Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
High-Speed Steel 0.01 mm Unit Outer Diameter Designated End Mill, 2-Flute / Short
MISUMI
[Features]·High-speed steel 2-flute square end mill short flute length type that allows cutting diameter to be specified in 0.01 mm increments·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 2.7 ～ 25 8 ～ 50 6 ～ 25 2 50 ～ 120 general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] Plane / Side / Groove / Countersinking TiCN / Non-Coated Square Standard torsion (30-40°) Available Cobalt HSS - - Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
High-Speed Steel 0.01 mm Unit Outer Diameter Designated End Mill, 2-Flute / Regular
MISUMI
[Features]·High-speed steel 2-flute square end mill regular flute length type that allows cutting diameter to be specified in 0.01 mm increments·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 2.7 ～ 24.99 10 ～ 60 6 ～ 25 2 50 ～ 130 general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] Plane / Side / Groove / Countersinking TiCN / Non-Coated Square Standard torsion (30-40°) Available Cobalt HSS - - Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
3S End Mill, 2-Flute Long Blade
FUKUDA
Long blade for deep grooving such as die engraving and wide carving Abundant variety of sizes
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 3 ～ 50 15 ～ 120 6 ～ 42 2 53 ～ 215 Cast Iron[○] / Aluminum[○] / Resin[○] / Other[○] / Other 2[○] / Other 3[○] / Other 4[○] Plane / Side / Groove / Plunging (Z feed) Non-Coated Square Standard torsion (30-40°) Available Alloy HSS - - From: 598,814 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
3S End Mill, 2-Flute Extra Long Blade
FUKUDA
Long blade for deep grooving such as die engraving and wide carving Abundant variety of sizes
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 0.8 ～ 60 2.5 ～ 300 6 ～ 42 2 42 ～ 400 Cast Iron[○] / Aluminum[○] / Resin[○] / Other[○] / Other 2[○] / Other 3[○] / Other 4[○] Plane / Side / Groove / Plunging (Z feed) Non-Coated Square Standard torsion (30-40°) Available Alloy HSS - - From: 598,814 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
FUKUDA
An end mill with a long shank for deep engraving.[Features]·The length of the blade is the same as that of a long blade, providing excellent workability.·A wide range of blade diameters from 3 to 50 mm is available.·Materials: HSS-Co (SKH56).·Lead angle: Right twist 30°.·Blade diameter tolerance: 0 to -0.03.[Applications]·Optimal for processing deep holes and deep engraving.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 3 ～ 50 30 ～ 120 6 ～ 42 2 100 ～ 300 Cast Iron[○] / Aluminum[○] / Resin[○] / Other[○] / Other 2[○] / Other 3[○] / Other 4[○] Plane / Side / Groove / Plunging (Z feed) Non-Coated Square Standard torsion (30-40°) Available Alloy HSS - - From: 843,730 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Special Long Shank End Mill, 2-Flute
FUKUDA
The shank has been made especially long for deep engraving. Designed with a thin shank.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 8 ～ 50 20 ～ 75 6 ～ 42 2 100 ～ 350 Cast Iron[○] / Aluminum[○] / Resin[○] / Other[○] / Other 2[○] / Other 3[○] / Other 4[○] Plane / Side / Groove / Plunging (Z feed) Non-Coated Square Standard torsion (30-40°) Available Alloy HSS - - From: 1,035,335 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
3S End Mill, 4-Flute (Standard Blade)
FUKUDA
Side cutting and groove re-polishing are easy
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 3 ～ 100 13 ～ 80 6 ～ 42 4 51 ～ 180 Cast Iron[○] / Aluminum[○] / Resin[○] / Other[○] / Other 2[○] / Other 3[○] / Other 4[○] Plane / Side / Groove Non-Coated Square Standard torsion (30-40°) Available Alloy HSS - - From: 523,274 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
3S End Mill, 6-Flute (Standard Blade)
FUKUDA
Side cutting and groove re-polishing are easy
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 50 ～ 100 75 ～ 80 32 ～ 42 6 160 ～ 180 Cast Iron[○] / Aluminum[○] / Resin[○] / Other[○] / Other 2[○] / Other 3[○] / Other 4[○] Plane / Side / Groove Non-Coated Square Standard torsion (30-40°) Available Alloy HSS - - From: 13,044,671 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
3S End Mill, 4-Flute Long Blade
FUKUDA
Long blade for cutting such as deep grooving and wide widths Repolishing is easy
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 3 ～ 50 20 ～ 125 6 ～ 42 4 58 ～ 220 Cast Iron[○] / Aluminum[○] / Resin[○] / Other[○] / Other 2[○] / Other 3[○] / Other 4[○] Plane / Side / Groove Non-Coated Square Standard torsion (30-40°) Available Alloy HSS - - From: 655,272 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
3S End Mill, 6-Flute Extra Long Blade
FUKUDA
Long blade for cutting such as deep grooving and wide widths Repolishing is easy
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 50 ～ 60 150 ～ 300 42 6 245 ～ 400 Cast Iron[○] / Aluminum[○] / Resin[○] / Other[○] / Other 2[○] / Other 3[○] / Other 4[○] Plane / Side / Groove Non-Coated Square Standard torsion (30-40°) Available Alloy HSS - - From: 22,038,100 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
FUKUDA
Long shank / center-cut for deep engraving and blind holes
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 3 ～ 50 30 ～ 120 6 ～ 42 4 100 ～ 300 Cast Iron[○] / Aluminum[○] / Resin[○] / Other[○] / Other 2[○] / Other 3[○] / Other 4[○] Plane / Side / Groove / Plunging (Z feed) Non-Coated Square Standard torsion (30-40°) Available Alloy HSS - - From: 881,500 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Special Long Shank End Mill, 4-Flute
FUKUDA
The shank has been made especially long for deep engraving. Designed with a thin shank.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 8 ～ 50 20 ～ 75 6 ～ 42 4 100 ～ 350 Cast Iron[○] / Aluminum[○] / Resin[○] / Other[○] / Other 2[○] / Other 3[○] / Other 4[○] Plane / Side / Groove Non-Coated Square Standard torsion (30-40°) Available Alloy HSS - - From: 1,033,171 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
End Mill For Keyway (Negative Tolerance)
FUKUDA
Endmill dedicated for key groove machining. Negative blade diameter tolerance. A straight shank.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 3 ～ 30 5 ～ 30 6 ～ 25 2 50 ～ 100 Cast Iron[○] / Aluminum[○] / Resin[○] / Other[○] / Other 2[○] / Other 3[○] / Other 4[○] Other Non-Coated Square Other Available Alloy HSS - - From: 655,272 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
End Mill For Keyway / BS Shank (Negative Tolerance)
FUKUDA
Endmill dedicated for key groove machining. Negative blade diameter tolerance. BS shank.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 3 ～ 12 4.5 ～ 18 BS5 2 62 ～ 76 Cast Iron[○] / Aluminum[○] / Resin[○] / Other[○] / Other 2[○] / Other 3[○] / Other 4[○] Other Non-Coated Square Other Available High-speed steel - - From: 773,304 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
KHB2TS Hybrid Short 2-Flute Blade
SANKO MFG
A 2-flute end mill for finish machining. Abrasion resistance is excellent and high efficiency machining is possible.[Features]· A next-generation end mill that combines the characteristics of HSS (toughness, etc.) and carbide (high efficiency, etc.).· Can be used from raw materials to high hardness materials, hard to chip, and usable without worries for long hours.· Furthermore, machining speed is equivalent to carbide, providing "high efficiency and safety".· Processing of high-speed steel substrate creates a cost difference from carbide substrates, reducing costs.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 5 ～ 30 10 ～ 55 8 ～ 25 2 60 ～ 135 general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[◎] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] Plane / Side / Groove / Inclined Cuts For High Hardness (Silicon Group) Square Standard torsion (30-40°) Available Cobalt HSS - - From: 763,862 VND Days to Ship: Số ngày giao hàng: 7 Day(s) or more
7 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
P-VS2T, P Coating 2-Flute Short Flute
SANKO MFG
[Features]· P coating provides excellent surface flatness and abrasion resistance.· A 2-flute end mill for finish machining.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 3 ～ 30 8 ～ 55 6 ～ 25 2 50 ～ 135 general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] Plane / Side / Groove / Inclined Cuts For General Steels (AlCrN, etc.) Square Standard torsion (30-40°) Available Cobalt HSS - - From: 526,028 VND Days to Ship: Số ngày giao hàng: 7 Day(s) or more
7 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
SS2T S Coating S-TEC 2-Flute Short Flute
SANKO MFG
2-flute endmill with TiCN coating. Can be used widely for milling of grooves, sides, holes, etc.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 1 ～ 40 2 ～ 65 6 ～ 32 2 50 ～ 150 general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[○] Plane / Side / Groove / Inclined Cuts TiCN Square Standard torsion (30-40°) Available Powder high-speed steel - - From: 697,174 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
SS2TL S Coated Estech 2-Flute Long
SANKO MFG
[Features]· 2-flute finishing endmill with TiCN coating.· Can be used widely for milling of grooves, sides, holes, etc.· Enables a wide range of side machining and deep engraving, due to the long flute length.· High grade powder metallurgy HSS with S-coating.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 3 ～ 40 15 ～ 105 6 ～ 32 2 55 ～ 190 general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[○] Plane / Side TiCN Square Standard torsion (30-40°) Available Powder high-speed steel - - From: 847,861 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
STEC2T ESTECH 2-Flute Short Blade
SANKO MFG
[Features]· A 2-flute end mill for finish machining.· Can be used widely for milling of grooves, sides, holes, etc.· Uses high grade powder metallurgy HSS.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 1 ～ 40 2 ～ 65 6 ～ 32 2 50 ～ 150 general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[○] / Titanium[○] Plane / Side / Groove / Inclined Cuts Non-Coated Square Standard torsion (30-40°) Available Powder high-speed steel - - From: 712,596 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
STEC2TM ESTECH 2-Flute Regular Blade
SANKO MFG
[Features]· A 2-flute end mill for finish machining.· Can be used widely for milling of grooves, sides, holes, etc.· Uses high grade powder metallurgy HSS.· Enables a wide range of machining applications, due to the regular flute length.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 3 ～ 20 10 ～ 55 6 ～ 20 2 60 ～ 130 general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[○] / Titanium[○] Plane / Side / Groove / Inclined Cuts Non-Coated Square Standard torsion (30-40°) Available Powder high-speed steel - - From: 679,469 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
STEC2TL ESTECH 2-Flute Long Blade
SANKO MFG
[Features]· A 2-flute end mill for finish machining.· Can be used widely for milling of grooves, sides, holes, etc.· Uses high grade powder metallurgy HSS.· Enables a wide range of side machining and deep engraving, due to the long flute length.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 3 ～ 30 15 ～ 105 6 ～ 25 2 55 ～ 185 general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[○] / Titanium[○] Plane / Side Non-Coated Square Standard torsion (30-40°) Available Powder high-speed steel - - From: 826,418 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
SANKO MFG
A 2-flute end mill for finish machining. Enables a wide range of machining applications, due to the regular flute length.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 3 ～ 14 10 ～ 35 6 ～ 12 2 50 ～ 90 general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] Plane / Side / Groove / Inclined Cuts Non-Coated Square Standard torsion (30-40°) Available Cobalt HSS - - From: 444,678 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
KHB4TS Hybrid Short 4-Flute Blade
SANKO MFG
[Features]· A 4-flute end mill for finish machining.· Abrasion resistance is excellent and high efficiency machining is possible.· A next-generation end mill that combines the characteristics of HSS (toughness, etc.) and carbide (high efficiency, etc.).· Can be used from raw materials to high hardness materials, hard to chip, and usable without worries for long hours.· Furthermore, machining speed is equivalent to carbide, providing "high functionality and safety".· Processing of high-speed steel substrate creates a cost difference from carbide substrates, reducing costs.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 5 ～ 30 15 ～ 55 8 ～ 25 4 60 ～ 135 general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[◎] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] Plane / Side / Groove / Inclined Cuts For High Hardness (Silicon Group) Square Standard torsion (30-40°) Available Cobalt HSS - - From: 838,222 VND Days to Ship: Số ngày giao hàng: 7 Day(s) or more
7 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
P-VS3T P Coated 3-Flute Short Blade
SANKO MFG
[Features]· A 3-flute end mill for finish machining.· P coating provides excellent surface flatness and abrasion resistance
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 3 ～ 30 10 ～ 55 6 ～ 25 3 50 ～ 135 general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] Plane / Side / Groove / Inclined Cuts For General Steels (AlCrN, etc.) Square Standard torsion (30-40°) Available Cobalt HSS - - From: 575,011 VND Days to Ship: Số ngày giao hàng: 7 Day(s) or more
7 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
P-VS4T, P Coating 4-Flute Short Flute
SANKO MFG
[Features]· A 4-flute end mill for finish machining.· P coating provides excellent surface flatness and abrasion resistance.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 3 ～ 30 10 ～ 55 6 ～ 25 4 50 ～ 135 general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] Plane / Side / Groove / Inclined Cuts For General Steels (AlCrN, etc.) Square Standard torsion (30-40°) Available Cobalt HSS - - From: 575,011 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
SS4T S Coating STEC 4-Flute Short
SANKO MFG
[Features]· 4-flute finishing endmill with TiCN coating.· High grade powder metallurgy HSS with S-coating.· Ideal for Finish Machining
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 3 ～ 40 10 ～ 65 6 ～ 32 4 50 ～ 150 general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[○] Plane / Side / Groove / Inclined Cuts TiCN Square Standard torsion (30-40°) Available Powder high-speed steel - - From: 911,006 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
STEC4T ESTECH 4-Flute Short Blade
SANKO MFG
[Features]· Uses high grade powder metallurgy HSS.· Ideal for finish machining.· A 4-flute end mill for finish machining.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 3 ～ 40 10 ～ 65 6 ～ 32 4 50 ～ 150 general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[○] / Titanium[○] Plane / Side / Groove / Inclined Cuts Non-Coated Square Standard torsion (30-40°) Available Powder high-speed steel - - From: 652,322 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
STEC4TL S TECH 4-Flute Long Flute
SANKO MFG
A 4-flute end mill for finish machining. Enables a wide range of side machining and deep engraving, due to the long flute length.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 3 ～ 40 15 ～ 105 6 ～ 32 4 55 ～ 190 general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[○] / Titanium[○] Plane / Side Non-Coated Square Standard torsion (30-40°) Available Powder high-speed steel - - From: 904,123 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
SANKO MFG
A 4-flute end mill for finish machining. The outer diameter tolerance is positive.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 3 ～ 40 10 ～ 65 6 ～ 32 4 50 ～ 150 general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] Plane / Side / Groove / Inclined Cuts Non-Coated Square Standard torsion (30-40°) Available Cobalt HSS - - From: 412,127 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
P-XαS P Coating Xα Nick Short Flute
SANKO MFG
A semi-fine pitch type roughing end mill. Excellent chip discharge.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 5 ～ 50 10 ～ 80 6 ～ 42 4 ～ 6 70 ～ 200 general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] Plane / Side / Groove / Inclined Cuts For General Steels (AlCrN, etc.) Roughing Standard torsion (30-40°) Available Cobalt HSS - - From: 1,057,564 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
P-XαM P Coating Xα Nick Regular Flute
SANKO MFG
[Features]· A semi-fine pitch type P-XαS roughing end mill.· Excellent chip discharge.· Enables a wide range of machining applications, due to the regular flute.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 5 ～ 40 15 ～ 100 6 ～ 32 4 ～ 6 80 ～ 220 general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] Plane / Side / Groove / Inclined Cuts For General Steels (AlCrN, etc.) Roughing Standard torsion (30-40°) Available Cobalt HSS - - From: 1,336,512 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
SSαM S Coating Estech α Nick Regular Flute
SANKO MFG
[Features]· Semi-fine pitch type roughing endmill with TiCN coating.· Extended periods of machining with hard-to-cut materials are possible.· Enables a wide range of machining applications, due to the regular flute length.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 5 ～ 50 15 ～ 120 6 ～ 42 4 ～ 6 80 ～ 220 general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[○] Plane / Side / Groove / Inclined Cuts TiCN Roughing Standard torsion (30-40°) Available Powder high-speed steel - - From: 1,625,760 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
SSα L S Coated Estech α Nick Long Blade
SANKO MFG
[Features]· Semi-fine pitch type roughing endmill with TiCN coating.· Extended periods of machining with hard-to-cut materials are possible.· Enables deep engraving, due to the long flute length.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 6 ～ 50 30 ～ 150 6 ～ 42 4 ～ 6 80 ～ 250 general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[○] Plane / Side / Groove TiCN Roughing Standard torsion (30-40°) Available Powder high-speed steel - - From: 1,833,730 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
SSαLS S Coated Estech α Nick Long Shank
SANKO MFG
Semi-fine pitch type roughing endmill with TiCN coating. Extended periods of machining with hard-to-cut materials are possible. The long shank allows for machining in deep sections.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 16 ～ 50 40 ～ 75 16 ～ 42 4 ～ 6 180 ～ 320 general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[○] Plane / Side / Groove / Inclined Cuts TiCN Roughing Standard torsion (30-40°) Available Powder high-speed steel - - From: 2,871,712 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
S-FPαS, S Coating Fine Pitch Short Flute
SANKO MFG
Fine pitch type roughing endmill with TiCN coating. Machining allowance can be reduced when performing finish machining.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 5 ～ 50 10 ～ 80 6 ～ 42 4 ～ 6 70 ～ 200 general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] Plane / Side / Groove / Inclined Cuts TiCN Roughing Standard torsion (30-40°) Available Cobalt HSS - - From: 1,189,563 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
S-FPαM S Coating Fine Pitch Regular Flute (Roughing End Mill)
SANKO MFG
[Features]· Fine pitch type roughing endmill with S coating.· Machining allowance can be reduced when performing finish machining.· Enables a wide range of machining applications, due to the regular flute length.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 5 ～ 50 15 ～ 120 6 ～ 42 4 ～ 6 80 ～ 240 general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] Plane / Side / Groove / Inclined Cuts TiCN Roughing Standard torsion (30-40°) Available Cobalt HSS - - From: 1,488,380 VND Days to Ship: Số ngày giao hàng: 7 Day(s) or more
7 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
S-FPαL S-Coating Fine Pitch Long Flute
SANKO MFG
[Features]· Fine pitch type roughing endmill with S coating.· Machining allowance can be reduced when performing finish machining.· Enables a wide range of machining and deep engraving, due to the long flute length.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 10 ～ 50 45 ～ 150 10 ～ 42 4 ～ 6 100 ～ 270 general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] Plane / Side / Groove TiCN Roughing Standard torsion (30-40°) Available Cobalt HSS - - From: 2,445,814 VND Days to Ship: Số ngày giao hàng: 7 Day(s) or more
7 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
S-αS S-Coating α Nick Short Flute
SANKO MFG
[Features]· Standard pitch type roughing endmill with TiCN coating.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 5 ～ 50 10 ～ 80 6 ～ 42 4 ～ 6 70 ～ 200 general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] Plane / Side / Groove / Inclined Cuts TiCN Roughing Standard torsion (30-40°) Available Cobalt HSS - - From: 1,189,563 VND Days to Ship: Số ngày giao hàng: 7 Day(s) or more
7 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
S-αM S-Coated Alpha Nick Regular Blade
SANKO MFG
Standard pitch type roughing endmill with TiCN coating. Enables a wide range of machining applications, due to the regular flute length.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 10 ～ 50 35 ～ 120 10 ～ 42 4 ～ 6 100 ～ 240 general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] Plane / Side / Groove / Inclined Cuts TiCN Roughing Standard torsion (30-40°) Available Cobalt HSS - - From: 1,826,147 VND Days to Ship: Số ngày giao hàng: 7 Day(s) or more
7 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
S-αL S-Coated Alpha Nick Long Blade
SANKO MFG
Standard pitch type roughing endmill with TiCN coating. Enables a wide range of machining and deep engraving, due to the long flute length.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 14 ～ 50 65 ～ 200 16 ～ 42 4 ～ 6 145 ～ 320 general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] Plane / Side / Groove TiCN Roughing Standard torsion (30-40°) Available Cobalt HSS - - From: 4,034,521 VND Days to Ship: Số ngày giao hàng: 7 Day(s) or more
7 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
S-αH S Coating α Nick Hard Type
SANKO MFG
Hard pitch type roughing endmill with TiCN coating. Ideal for heavy duty groove cutting.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 5 ～ 50 8 ～ 75 6 ～ 42 4 ～ 6 55 ～ 165 general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] Plane / Side / Groove / Inclined Cuts TiCN Roughing Standard torsion (30-40°) Available Cobalt HSS - - From: 1,137,432 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
| BrandNhãn hiệu |
|---|
| Product SeriesDòng sản phẩm |
| From |
| Days to ShipSố ngày giao hàng |
| SpecificationsĐặc điểm kĩ thuật |
| Blade diameter (D)(φ) |
| Blade length (ℓ)(mm) |
| Shank diameter (d)(mm) |
| Number of flutes(sheet) |
| Overall Length (L)(mm) |
| work material |
| Machining Application |
| Coating |
| Blade shape type |
| Torsion Angle (θ) |
| Base Blade Y/N |
| Tool Material Type |
| Underneck length (ℓ1)(mm) |
| shank |
You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | |
| BrandNhãn hiệu | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | FUKUDA | FUKUDA | FUKUDA | FUKUDA | FUKUDA | FUKUDA | FUKUDA | FUKUDA | FUKUDA | FUKUDA | FUKUDA | FUKUDA | SANKO MFG | SANKO MFG | SANKO MFG | SANKO MFG | SANKO MFG | SANKO MFG | SANKO MFG | SANKO MFG | SANKO MFG | SANKO MFG | SANKO MFG | SANKO MFG | SANKO MFG | SANKO MFG | SANKO MFG | SANKO MFG | SANKO MFG | SANKO MFG | SANKO MFG | SANKO MFG | SANKO MFG | SANKO MFG | SANKO MFG | SANKO MFG | SANKO MFG | SANKO MFG | SANKO MFG |
| Product SeriesDòng sản phẩm | High-Speed Steel Blade Relief End Mill, 2-Flute / Short Model | High-Speed Steel Blade Relief End Mill, 2-Flute / Regular Model | High-Speed Steel Blade Relief End Mill, 4-Flute / Short Model | High-Speed Steel Blade Relief End Mill, 4-Flute / Regular Model | High-Speed Steel 0.01 mm Unit Outer Diameter Designated End Mill, 2-Flute / Short | High-Speed Steel 0.01 mm Unit Outer Diameter Designated End Mill, 2-Flute / Regular | S-FPαM S Coating Fine Pitch Regular Flute (Roughing End Mill) | ||||||||||||||||||||||||||||||||||||||
| From | 598,814 VND | 598,814 VND | 843,730 VND | 1,035,335 VND | 523,274 VND | 13,044,671 VND | 655,272 VND | 22,038,100 VND | 881,500 VND | 1,033,171 VND | 655,272 VND | 773,304 VND | 763,862 VND | 526,028 VND | 697,174 VND | 847,861 VND | 712,596 VND | 679,469 VND | 826,418 VND | 444,678 VND | 838,222 VND | 575,011 VND | 575,011 VND | 911,006 VND | 652,322 VND | 904,123 VND | 412,127 VND | 1,057,564 VND | 1,336,512 VND | 1,625,760 VND | 1,833,730 VND | 2,871,712 VND | 1,189,563 VND | 1,488,380 VND | 2,445,814 VND | 1,189,563 VND | 1,826,147 VND | 4,034,521 VND | 1,137,432 VND | ||||||
| Days to ShipSố ngày giao hàng | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 6 Day(s) or more |
| SpecificationsĐặc điểm kĩ thuật | |||||||||||||||||||||||||||||||||||||||||||||
| Blade diameter (D)(φ) | 8 ～ 25 | 8 ～ 25 | 8 ～ 25 | 8 ～ 25 | 2.7 ～ 25 | 2.7 ～ 24.99 | 3 ～ 50 | 0.8 ～ 60 | 3 ～ 50 | 8 ～ 50 | 3 ～ 100 | 50 ～ 100 | 3 ～ 50 | 50 ～ 60 | 3 ～ 50 | 8 ～ 50 | 3 ～ 30 | 3 ～ 12 | 5 ～ 30 | 3 ～ 30 | 1 ～ 40 | 3 ～ 40 | 1 ～ 40 | 3 ～ 20 | 3 ～ 30 | 3 ～ 14 | 5 ～ 30 | 3 ～ 30 | 3 ～ 30 | 3 ～ 40 | 3 ～ 40 | 3 ～ 40 | 3 ～ 40 | 5 ～ 50 | 5 ～ 40 | 5 ～ 50 | 6 ～ 50 | 16 ～ 50 | 5 ～ 50 | 5 ～ 50 | 10 ～ 50 | 5 ～ 50 | 10 ～ 50 | 14 ～ 50 | 5 ～ 50 |
| Blade length (ℓ)(mm) | - | - | - | - | 8 ～ 50 | 10 ～ 60 | 15 ～ 120 | 2.5 ～ 300 | 30 ～ 120 | 20 ～ 75 | 13 ～ 80 | 75 ～ 80 | 20 ～ 125 | 150 ～ 300 | 30 ～ 120 | 20 ～ 75 | 5 ～ 30 | 4.5 ～ 18 | 10 ～ 55 | 8 ～ 55 | 2 ～ 65 | 15 ～ 105 | 2 ～ 65 | 10 ～ 55 | 15 ～ 105 | 10 ～ 35 | 15 ～ 55 | 10 ～ 55 | 10 ～ 55 | 10 ～ 65 | 10 ～ 65 | 15 ～ 105 | 10 ～ 65 | 10 ～ 80 | 15 ～ 100 | 15 ～ 120 | 30 ～ 150 | 40 ～ 75 | 10 ～ 80 | 15 ～ 120 | 45 ～ 150 | 10 ～ 80 | 35 ～ 120 | 65 ～ 200 | 8 ～ 75 |
| Shank diameter (d)(mm) | 10 ～ 25 | 10 ～ 25 | 10 ～ 25 | 10 ～ 25 | 6 ～ 25 | 6 ～ 25 | 6 ～ 42 | 6 ～ 42 | 6 ～ 42 | 6 ～ 42 | 6 ～ 42 | 32 ～ 42 | 6 ～ 42 | 42 | 6 ～ 42 | 6 ～ 42 | 6 ～ 25 | BS5 | 8 ～ 25 | 6 ～ 25 | 6 ～ 32 | 6 ～ 32 | 6 ～ 32 | 6 ～ 20 | 6 ～ 25 | 6 ～ 12 | 8 ～ 25 | 6 ～ 25 | 6 ～ 25 | 6 ～ 32 | 6 ～ 32 | 6 ～ 32 | 6 ～ 32 | 6 ～ 42 | 6 ～ 32 | 6 ～ 42 | 6 ～ 42 | 16 ～ 42 | 6 ～ 42 | 6 ～ 42 | 10 ～ 42 | 6 ～ 42 | 10 ～ 42 | 16 ～ 42 | 6 ～ 42 |
| Number of flutes(sheet) | 2 | 2 | 4 | 4 | 2 | 2 | 2 | 2 | 2 | 2 | 4 | 6 | 4 | 6 | 4 | 4 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 4 | 3 | 4 | 4 | 4 | 4 | 4 | 4 ～ 6 | 4 ～ 6 | 4 ～ 6 | 4 ～ 6 | 4 ～ 6 | 4 ～ 6 | 4 ～ 6 | 4 ～ 6 | 4 ～ 6 | 4 ～ 6 | 4 ～ 6 | 4 ～ 6 |
| Overall Length (L)(mm) | 60 ～ 120 | 60 ～ 130 | 69 ～ 121 | 78 ～ 144 | 50 ～ 120 | 50 ～ 130 | 53 ～ 215 | 42 ～ 400 | 100 ～ 300 | 100 ～ 350 | 51 ～ 180 | 160 ～ 180 | 58 ～ 220 | 245 ～ 400 | 100 ～ 300 | 100 ～ 350 | 50 ～ 100 | 62 ～ 76 | 60 ～ 135 | 50 ～ 135 | 50 ～ 150 | 55 ～ 190 | 50 ～ 150 | 60 ～ 130 | 55 ～ 185 | 50 ～ 90 | 60 ～ 135 | 50 ～ 135 | 50 ～ 135 | 50 ～ 150 | 50 ～ 150 | 55 ～ 190 | 50 ～ 150 | 70 ～ 200 | 80 ～ 220 | 80 ～ 220 | 80 ～ 250 | 180 ～ 320 | 70 ～ 200 | 80 ～ 240 | 100 ～ 270 | 70 ～ 200 | 100 ～ 240 | 145 ～ 320 | 55 ～ 165 |
| work material | general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | Cast Iron[○] / Aluminum[○] / Resin[○] / Other[○] / Other 2[○] / Other 3[○] / Other 4[○] | Cast Iron[○] / Aluminum[○] / Resin[○] / Other[○] / Other 2[○] / Other 3[○] / Other 4[○] | Cast Iron[○] / Aluminum[○] / Resin[○] / Other[○] / Other 2[○] / Other 3[○] / Other 4[○] | Cast Iron[○] / Aluminum[○] / Resin[○] / Other[○] / Other 2[○] / Other 3[○] / Other 4[○] | Cast Iron[○] / Aluminum[○] / Resin[○] / Other[○] / Other 2[○] / Other 3[○] / Other 4[○] | Cast Iron[○] / Aluminum[○] / Resin[○] / Other[○] / Other 2[○] / Other 3[○] / Other 4[○] | Cast Iron[○] / Aluminum[○] / Resin[○] / Other[○] / Other 2[○] / Other 3[○] / Other 4[○] | Cast Iron[○] / Aluminum[○] / Resin[○] / Other[○] / Other 2[○] / Other 3[○] / Other 4[○] | Cast Iron[○] / Aluminum[○] / Resin[○] / Other[○] / Other 2[○] / Other 3[○] / Other 4[○] | Cast Iron[○] / Aluminum[○] / Resin[○] / Other[○] / Other 2[○] / Other 3[○] / Other 4[○] | Cast Iron[○] / Aluminum[○] / Resin[○] / Other[○] / Other 2[○] / Other 3[○] / Other 4[○] | Cast Iron[○] / Aluminum[○] / Resin[○] / Other[○] / Other 2[○] / Other 3[○] / Other 4[○] | general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[◎] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[○] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[○] / Titanium[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[○] / Titanium[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[○] / Titanium[○] | general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] | general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[◎] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[○] / Titanium[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[○] / Titanium[○] | general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[○] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[○] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[○] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] |
| Machining Application | Plane / Side / Groove / Countersinking | Plane / Side / Groove / Countersinking | Plane / Side / Groove / Countersinking | Plane / Side / Groove / Countersinking | Plane / Side / Groove / Countersinking | Plane / Side / Groove / Countersinking | Plane / Side / Groove / Plunging (Z feed) | Plane / Side / Groove / Plunging (Z feed) | Plane / Side / Groove / Plunging (Z feed) | Plane / Side / Groove / Plunging (Z feed) | Plane / Side / Groove | Plane / Side / Groove | Plane / Side / Groove | Plane / Side / Groove | Plane / Side / Groove / Plunging (Z feed) | Plane / Side / Groove | Other | Other | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove | Plane / Side / Groove / Inclined Cuts |
| Coating | TiCN / Non-Coated | TiCN / Non-Coated | TiCN / Non-Coated | TiCN / Non-Coated | TiCN / Non-Coated | TiCN / Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | For High Hardness (Silicon Group) | For General Steels (AlCrN, etc.) | TiCN | TiCN | Non-Coated | Non-Coated | Non-Coated | Non-Coated | For High Hardness (Silicon Group) | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | TiCN | Non-Coated | Non-Coated | Non-Coated | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | TiCN | TiCN | TiCN | TiCN | TiCN | TiCN | TiCN | TiCN | TiCN | TiCN |
| Blade shape type | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Roughing | Roughing | Roughing | Roughing | Roughing | Roughing | Roughing | Roughing | Roughing | Roughing | Roughing | Roughing |
| Torsion Angle (θ) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Other | Other | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) |
| Base Blade Y/N | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available |
| Tool Material Type | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Alloy HSS | Alloy HSS | Alloy HSS | Alloy HSS | Alloy HSS | Alloy HSS | Alloy HSS | Alloy HSS | Alloy HSS | Alloy HSS | Alloy HSS | High-speed steel | Cobalt HSS | Cobalt HSS | Powder high-speed steel | Powder high-speed steel | Powder high-speed steel | Powder high-speed steel | Powder high-speed steel | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Powder high-speed steel | Powder high-speed steel | Powder high-speed steel | Cobalt HSS | Cobalt HSS | Cobalt HSS | Powder high-speed steel | Powder high-speed steel | Powder high-speed steel | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS |
| Underneck length (ℓ1)(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| shank | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...Tải…
ConfigureTạo
Specification/DimensionsĐặc điểm kỹ thuật / Kích thướcĐặc điểm kỹ thuật / Kích thước
-
Blade diameter (D)(φ)
-
0.45～0.95
- 0.45
- 0.8
- 0.9
- 0.95
-
1～1.9
- 1
- 1/2
- 1/4
- 1/8
- 1.05
- 1.1
- 1.2
- 1.3
- 1.4
- 1.5
- 1.59
- 1.6
- 1.7
- 1.8
- 1.9
-
2～2.9
- 2
- 2.1
- 2.2
- 2.3
- 2.38
- 2.4
- 2.5
- 2.6
- 2.7
- 2.8
- 2.9
-
3～3.97
- 3
- 3/4
- 3/16
- 3.1
- 3.18
- 3.2
- 3.3
- 3.4
- 3.5
- 3.6
- 3.7
- 3.8
- 3.9
- 3.97
-
4～4.9
- 4
- 4.1
- 4.2
- 4.3
- 4.4
- 4.5
- 4.6
- 4.7
- 4.76
- 4.8
- 4.9
-
5～5.9
- 5
- 5/8
- 5.1
- 5.2
- 5.3
- 5.4
- 5.5
- 5.56
- 5.6
- 5.7
- 5.8
- 5.9
-
6～6.9
- 6
- 6.05
- 6.1
- 6.2
- 6.3
- 6.35
- 6.4
- 6.5
- 6.6
- 6.7
- 6.8
- 6.9
-
7～7.94
- 7
- 7/8
- 7.1
- 7.2
- 7.3
- 7.4
- 7.5
- 7.6
- 7.7
- 7.8
- 7.9
- 7.94
-
8～8.9
- 8
- 8.1
- 8.2
- 8.3
- 8.4
- 8.5
- 8.6
- 8.7
- 8.8
- 8.9
-
9～9.9
- 9
- 9.1
- 9.2
- 9.3
- 9.4
- 9.5
- 9.53
- 9.6
- 9.7
- 9.8
- 9.9
-
10～10.9
- 10
- 10.1
- 10.2
- 10.3
- 10.4
- 10.5
- 10.6
- 10.7
- 10.8
- 10.9
-
11～11.9
- 11
- 11.1
- 11.11
- 11.2
- 11.3
- 11.4
- 11.5
- 11.6
- 11.7
- 11.8
- 11.9
-
12～12.9
- 12
- 12.1
- 12.2
- 12.3
- 12.4
- 12.5
- 12.6
- 12.7
- 12.8
- 12.9
-
13～13.9
- 13
- 13.1
- 13.2
- 13.3
- 13.4
- 13.5
- 13.6
- 13.7
- 13.8
- 13.9
-
14～14.9
- 14
- 14.1
- 14.2
- 14.29
- 14.3
- 14.4
- 14.5
- 14.6
- 14.7
- 14.8
- 14.9
-
15～15.9
- 15
- 15.1
- 15.2
- 15.3
- 15.4
- 15.5
- 15.6
- 15.7
- 15.8
- 15.88
- 15.9
-
16～16.9
- 16
- 16.1
- 16.2
- 16.3
- 16.4
- 16.5
- 16.6
- 16.7
- 16.8
- 16.9
-
17～17.9
- 17
- 17.1
- 17.2
- 17.3
- 17.4
- 17.46
- 17.5
- 17.6
- 17.7
- 17.8
- 17.9
-
18～18.9
- 18
- 18.1
- 18.2
- 18.3
- 18.4
- 18.5
- 18.6
- 18.7
- 18.8
- 18.9
-
19～19.9
- 19
- 19.05
- 19.1
- 19.2
- 19.3
- 19.4
- 19.5
- 19.6
- 19.7
- 19.8
- 19.9
-
20～20.9
- 20
- 20.1
- 20.2
- 20.3
- 20.4
- 20.5
- 20.6
- 20.64
- 20.7
- 20.8
- 20.9
-
21～21.9
- 21
- 21.1
- 21.2
- 21.3
- 21.4
- 21.5
- 21.6
- 21.7
- 21.8
- 21.9
-
22～22.9
- 22
- 22.1
- 22.2
- 22.23
- 22.3
- 22.4
- 22.5
- 22.6
- 22.7
- 22.8
- 22.9
-
23～23.9
- 23
- 23.1
- 23.2
- 23.3
- 23.4
- 23.5
- 23.6
- 23.7
- 23.8
- 23.81
- 23.9
-
24～24.9
- 24
- 24.1
- 24.2
- 24.3
- 24.4
- 24.5
- 24.6
- 24.7
- 24.8
- 24.9
-
25～25.9
- 25
- 25.1
- 25.2
- 25.3
- 25.4
- 25.5
- 25.6
- 25.7
- 25.8
- 25.9
-
26～26.9
- 26
- 26.1
- 26.2
- 26.3
- 26.4
- 26.5
- 26.6
- 26.7
- 26.8
- 26.9
-
27～27.9
- 27
- 27.1
- 27.2
- 27.3
- 27.4
- 27.5
- 27.6
- 27.7
- 27.8
- 27.9
-
28～28.9
- 28
- 28.1
- 28.2
- 28.3
- 28.4
- 28.5
- 28.6
- 28.7
- 28.8
- 28.9
-
29～29.9
- 29
- 29.1
- 29.2
- 29.3
- 29.4
- 29.5
- 29.6
- 29.7
- 29.8
- 29.9
-
30～30.9
- 30
- 30.1
- 30.2
- 30.3
- 30.4
- 30.5
- 30.6
- 30.7
- 30.8
- 30.9
-
31～31.9
- 31
- 31.1
- 31.2
- 31.3
- 31.4
- 31.5
- 31.6
- 31.7
- 31.75
- 31.8
- 31.9
-
32～32.9
- 32
- 32.1
- 32.2
- 32.3
- 32.4
- 32.5
- 32.6
- 32.7
- 32.8
- 32.9
-
33～33.9
- 33
- 33.1
- 33.2
- 33.3
- 33.4
- 33.5
- 33.6
- 33.7
- 33.8
- 33.9
-
34～34.9
- 34
- 34.1
- 34.2
- 34.3
- 34.4
- 34.5
- 34.6
- 34.7
- 34.8
- 34.9
-
35～35.9
- 35
- 35.1
- 35.2
- 35.3
- 35.4
- 35.5
- 35.6
- 35.7
- 35.8
- 35.9
-
36～36.9
- 36
- 36.1
- 36.2
- 36.3
- 36.4
- 36.5
- 36.6
- 36.7
- 36.8
- 36.9
-
37～37.9
- 37
- 37.1
- 37.2
- 37.3
- 37.4
- 37.5
- 37.6
- 37.7
- 37.8
- 37.9
-
38～38.9
- 38
- 38.1
- 38.2
- 38.3
- 38.4
- 38.5
- 38.6
- 38.7
- 38.8
- 38.9
-
39～39.9
- 39
- 39.1
- 39.2
- 39.3
- 39.4
- 39.5
- 39.6
- 39.7
- 39.8
- 39.9
-
40～40.9
- 40
- 40.1
- 40.2
- 40.3
- 40.4
- 40.5
- 40.6
- 40.7
- 40.8
- 40.9
-
41～41.9
- 41
- 41.1
- 41.2
- 41.3
- 41.4
- 41.5
- 41.6
- 41.7
- 41.8
- 41.9
-
42～42.9
- 42
- 42.1
- 42.2
- 42.3
- 42.4
- 42.5
- 42.6
- 42.7
- 42.8
- 42.9
-
43～43.9
- 43
- 43.1
- 43.2
- 43.3
- 43.4
- 43.5
- 43.6
- 43.7
- 43.8
- 43.9
-
44～44.9
- 44
- 44.1
- 44.2
- 44.3
- 44.4
- 44.5
- 44.6
- 44.7
- 44.8
- 44.9
-
45～45.5
- 45
- 45.5
-
46～46.5
- 46
- 46.5
-
47～47.5
- 47
- 47.5
-
48～48.5
- 48
- 48.5
-
49～49.5
- 49
- 49.5
-
50～50.8
- 50
- 50.5
- 50.8
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
-
80
-
85
-
90
-
95
-
100
[2.7-3/0.01φ Unit(s)][3.15-3.5/0.01φ Unit(s)][3.6-4/0.01φ Unit(s)][4.05-16/0.01φ Unit(s)][17-19.99/0.01φ Unit(s)][20.01-22.99/0.01φ Unit(s)][24-25/0.01φ Unit(s)]
-
-
Blade length (ℓ)(mm)
-
Shank diameter (d)(mm)
-
Number of flutes(sheet)
-
Overall Length (L)(mm)
-
work material
- general steel
- Quenched and tempered steel
- high hardness steel
- Stainless Steel
- Cast Iron
- Aluminum
- Titanium
- Copper
- Resin
- Other
- Other 2
- Other 3
- Other 4
-
Machining Application
-
Coating
-
Blade shape type
- Square
- Roughing
- For Keyway
-
Torsion Angle (θ)
-
Base Blade Y/N
-
Tool Material Type
- Cobalt HSS
- Powder high-speed steel
- High-speed steel
- Alloy HSS
-
Underneck length (ℓ1)(mm)
-
shank
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy