(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.
Brand |
|
---|---|
Filter By |
|
CAD |
|
Days to Ship |
|
100 itemsMặt hàng
You can add up to 6 items per a category to the compare list.
HM Coated 2-flute, Long Neck Ball HSLB
UNION TOOL
[Features]· Compared to conventional products, this model achieves higher machining efficiency, longer service life and higher quality machining of hard mold materials at 40 HRC or more.· New HARDMAX coating adopted to maintain film hardness while improving oxidation resistance· Provides stable processing for water-soluble/oil-based cutting oil, oil mist, and air blow· The machining dimension has been improved by improving the wear resistance and setting the rake angle of the ball tip to negative· The rake angle on the outer circumference side of the ball has been set to weak negative, securing sharpness, providing an excellent processed surface and preventing deflection
From: 520,716 VND |
---|
Special Price |
Days to Ship: Số ngày giao hàng: Same day or more |
You can add up to 6 items per a category to the compare list.
From: 842,338 VND |
---|
Days to Ship: Số ngày giao hàng: 4 Day(s) or more |
You can add up to 6 items per a category to the compare list.
From: 1,456,957 VND |
---|
Days to Ship: Số ngày giao hàng: 4 Day(s) or more |
You can add up to 6 items per a category to the compare list.
MRB230 MUGEN-COATING Long Neck Ball End Mill (for Deep Ribbing)
NS TOOL
[Features]・ Neck relief type suitable for narrow deep machining. Supports deep cutting precision 3D machining from low speed to high speed.・ Available in a total of 282 sizes.
From: 589,345 VND |
---|
Days to Ship: Số ngày giao hàng: 8 Day(s) or more |
You can add up to 6 items per a category to the compare list.
MRBH230 Long-Neck Ball, Hard (for High Hardness)
NS TOOL
[Features]・ The MUGEN Coating Premium for high hardness and the unique new shape give the tool excellent chipping resistance, and reduced chattering improves the finished surface.・ Achieves stable and long lifespan with long-time machining in high hardness range (48 to 65 HRC). In pursuit of the cutting diameter shape, the manufacturer improved the amount of tilt and machining precision.・ Supports high hardness materials up to 68 HRC.
From: 607,275 VND |
---|
Days to Ship: Số ngày giao hàng: Same day or more |
You can add up to 6 items per a category to the compare list.
SMB120 CBN Ball End Mill CBN Micro Ball for Ultra-Fine Machining
NS TOOL
The world's first. Micro ball end mill made of CBN material. Achieves sharp edges by making the best use of the CBN material characteristics
From: 6,538,762 VND |
---|
Days to Ship: Số ngày giao hàng: 12 Day(s) |
You can add up to 6 items per a category to the compare list.
SHC Series Carbide Ball End Mill, for High-Hardness Steel Machining, 2-Flute / Regular Model
MISUMI
[Features]·Realizes high durability by processing mold material of 60HRC or more·Machining of high hardness steel up to 65HRC is possible·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.
From: 715,386 VND |
---|
Special Price |
Days to Ship: Số ngày giao hàng: Same day |
You can add up to 6 items per a category to the compare list.
Single Cut Ball 70 End Mill DH-OCHB Type
DIJET
[Features]· One mill for roughing to finishing high-hardness material.· 4-blade solid ball end mill, capable of machining even 70 HRC hardness.· Reduces chattering by using high tool rigidity and unequal divisions.· Implements good cutting performance with low resistance, with a torsion angle of 45°.
From: 2,361,137 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
MISUMI
· A highly versatile series that's ideal for machining work materials from tempered steel (up to 45 HRC) to high hardness steel (up to 65 HRC).· Coating with excellent hardness and heat resistance makes it suitable for high speed machining. Popular ball end mill for high-hardness machining
From: 437,250 VND |
---|
Days to Ship: Số ngày giao hàng: 4 Day(s) or more |
You can add up to 6 items per a category to the compare list.
UNION TOOL
[Features]· Compared to conventional products, this model achieves higher machining efficiency, longer service life and higher quality machining of hard mold materials at 40 HRC or more.· New HARDMAX coating adopted to maintain film hardness while improving oxidation resistance· Provides stable processing for water-soluble/oil-based cutting oil, oil mist, and air blow· The machining dimension has been improved by improving the wear resistance and setting the rake angle of the ball tip to negative· The rake angle on the outer circumference side of the ball has been set to weak negative, securing sharpness, providing an excellent processed surface and preventing deflection
From: 513,634 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
MRB230SF MUGEN-COATING Long Neck Ball End Mill with Short Shank (for Shrink Fitting)
NS TOOL
Short shank type (shrink fit) long neck ball end mill
From: 686,354 VND |
---|
Days to Ship: Số ngày giao hàng: 12 Day(s) |
You can add up to 6 items per a category to the compare list.
MISUMI
CBN ball end mill that's ideal for precision finishing is available at a value price
From: 3,921,372 VND |
---|
Days to Ship: Số ngày giao hàng: 4 Day(s) or more |
You can add up to 6 items per a category to the compare list.
MRC Series Carbide Long Neck Ball End Mill, 2-Flute / Long Neck Model
MISUMI
High-performance MRC series is available in the industry's largest number of sizes
From: 494,588 VND |
---|
Days to Ship: Số ngày giao hàng: 4 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Ball End Type, 2-Flute FX-MG-EBD
OSG
[Notice] Alterations can now be specified. Please select from "Standard/Alterations Category" of narrowing conditions.[Features]・ A wide range of machining from general materials to hardened steel is possible. The manufacturer can also support high-speed machining centers.
From: 2,561,288 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Long Neck Ball Type, 2-Flute for High Hardness WXS-LN-EBD
OSG
Ultra-heat-resistant, ultra-hard WX super coated long neck ball. The effective length can be selected to suit the machining shape.
From: 443,333 VND |
---|
Days to Ship: Số ngày giao hàng: Quote |
You can add up to 6 items per a category to the compare list.
SSPBL220 CBN Super Spiral Long Neck Ball End Mill
NS TOOL
[Features]· Supports deeper milling by utilizing the features of SSPB220 and through the use of a spiral ball shape and strong back taper shape to improve both sharpness and the chipping resistance of cutting edges.
From: 5,178,906 VND |
---|
Days to Ship: Số ngày giao hàng: 12 Day(s) |
You can add up to 6 items per a category to the compare list.
MRC Series Carbide Ball End Mill, for Heat-Treated Steel Machining, 2-Flute / Regular Model
MISUMI
The user friendly regular flute length type is released simultaneously
From: 463,676 VND |
---|
Days to Ship: Số ngày giao hàng: 4 Day(s) or more |
You can add up to 6 items per a category to the compare list.
HLB, HM Coat, 2-Flute Long Neck Ball End Mill
UNION TOOL
[Features]· Can even be used to cut 65 HRC high speed steel material, with outstanding heat resistance temperature and lubricity· Provides unprecedented long life and can be used for both dry and wet applications
From: 546,486 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
HTNB HM coat 2-flute taper neck ball end mill
UNION TOOL
[Features]· High rigidity realized through an improved taper neck shape.· Adopts the HARDMAX coating that realizes outstanding heat resistance and lubricity· 65 HRC high hardness materials can also be cut
From: 1,074,285 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
MRC Series Carbide Ball End Mill, for Heat-Treated Steel Machining, 2-Flute / Short Model
MISUMI
High-performance products with emphasis on the machined surface accuracy are available in the deferred prices of the conventional products!
From: 461,043 VND |
---|
Days to Ship: Số ngày giao hàng: 4 Day(s) or more |
You can add up to 6 items per a category to the compare list.
GS MILL Long Neck Hard Ball GSBNH2
NACHI(FUJIKOSHI)
[Features]· Ideal for fine machining of molds.· Available in various sizes and can be used for all kinds of machining.· Cutting blades with a tapered back make contact with a workpiece with a shorter length.· Tapered back for reduction of cutting resistance and achievement of good roughness of the finished surface
From: 813,042 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
NACHI(FUJIKOSHI)
Supports a wide range of materials from raw materials to hardened materials. Suitable for processing of curved surfaces.
From: 2,050,211 VND |
---|
Days to Ship: Số ngày giao hàng: 10 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Ball End Type, 3-Flute FXS-EBT
OSG
The ball shape is composed of 3 flutes to the center to enable high efficiency machining with a 50% increase in table feed.
From: 2,624,435 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
OSG
The spherical cutting edge prevents chattering even when processing vertical walls. Also allows undercut machining.
From: 2,447,781 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
NS TOOL
[Features]・ Short shank type. (Shrink fit)・ You can set many depths of cut and it is effective at high speed feed.・ Ball end mill designed for high speed and high hardness machining.
From: 866,943 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
MACH225 MUGEN-COATING High Speed Ball End Mill for Hardened Steels
NS TOOL
[Features]・ Ball end mill designed for high speed and high hardness machining.・ Many cuts can be set, and it is effective at high speed feed.
From: 975,335 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
CoroMill Plura, Center Cut, R216.42-AC-G-1610 (Hardness 43HRc to 63HRc)
SANDVIK
High quality carbide end mill tools for a highly productive, efficient and reliable milling solution
From: 3,178,183 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
CoroMill Plura, Center Cut, R216.42-AK-G-16 (Hardness 43HRc to 63HRc)
SANDVIK
High quality carbide end mill tools for a highly productive, efficient and reliable milling solution
From: 3,339,521 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Ball End Mill, Center Cut, R216.4 (Hardness 43 HRC to 63 HRC), Cylindrical Shank
SANDVIK
High-quality carbide end mill CoroMill® for a highly productive, efficient and reliable milling solutionPlura profiling carbide ball end mill
From: 2,840,457 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Special Coat Solid Carbide End Mills For High Hardness (2 Flutes) IC2RBV
THE CUT
[Features]· The special coating and the abrasion-resistant ultra-fine particle alloy delivers effortless machining of high-hardness materials.· The use of an eccentric blade type helps improve surface roughness and blade tip strength.· Suitable for use with high speed machinery.
From: 590,311 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
MISUMI
[Features]·Ultra-fine particle cemented carbide base material suitable for machining high hardness steel is used (according to the manufacturer cutting test results).·MISUMI original shape with cutting edge rigid treatment and no side cutting edge. High rigid tool and cutting edge strength, achieving stable cutting edge shape and long tool lifespan in high-speed milling·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.
From: 2,514,992 VND |
---|
Days to Ship: Số ngày giao hàng: 4 Day(s) or more |
You can add up to 6 items per a category to the compare list.
MISUMI
The high precision ball end mill for shrink fit holder is ideal for the high-precision 3D machining of high-hardness steel
From: 1,363,947 VND |
---|
Days to Ship: Số ngày giao hàng: 4 Day(s) or more |
You can add up to 6 items per a category to the compare list.
MISUMI
The high precision ball end mill for shrink fit holder is ideal for the high-precision 3D machining of high-hardness steel
From: 544,661 VND |
---|
Special Price |
Days to Ship: Số ngày giao hàng: Same day |
You can add up to 6 items per a category to the compare list.
TSC Series Carbide Tapered Neck Ball End Mill, for High-Hardness Steel, 3-Flute / Tapered Neck Model
MISUMI
[Features]·3-flute, short-flute length shape is used to resist chattering and enable high-feed machining·Taper neck is effective in suppressing chattering·Machining of high hardness steel up to 65HRC is possible·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.
From: 1,172,523 VND |
---|
Days to Ship: Số ngày giao hàng: 4 Day(s) or more |
You can add up to 6 items per a category to the compare list.
X's Mill Geo Ball Long Shank 2GEOLSR
NACHI(FUJIKOSHI)
[Features]A carbide end mill with 2 flutes.The high cutting speed and high production efficiency lead to overall production cost reduction.The long shank allows contouring at deep positions and can be lengthened to suit the application.[Applications]Suitable for side milling, curved surface milling, engraving, and R-grooving.
From: 1,962,867 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
NACHI(FUJIKOSHI)
·CBN ball end mill.·Suitable for high-speed finishing of high-hardness material dies.
From: 7,987,208 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
From: 1,855,065 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
NACHI(FUJIKOSHI)
Ideal for precision mold polish-free machining. Rounding accuracy: ±3 μm, rounding accuracy range: 180°
From: 4,454,124 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
NACHI(FUJIKOSHI)
Supports a wide range of applications from mold steel to high-hardness steel. Ideal for finishing molds.
From: 1,680,968 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Ball End Type, 2-Flute FX-SS-EBD
OSG
Slim shank type with a shank diameter that is set to the blade diameter minus 1 mm. The protruding length can be freely adjusted.
From: 2,783,385 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Short Pencil-neck Type, 2-Flute FX-PCS-EBD-6
OSG
Super ultra-fine particle carbide alloy and high rigidity pencil neck achieves high speeds, high precision, and a super long life. Also eliminates chattering problems inherent in fine shape processing and carving.
From: 2,798,335 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Ball End Type, 2-Flute FX-MG-EBD-3
OSG
A wide range of machining is possible with the adoption of FX coating and high-toughness carbide material.Coated for steelStandard/Alteration category: Manufacturer's standard productNumber of flutes (pcs.) 2Shank diameter (mm) 3, overall length (mm) 40, helix angle: standard helix (30 to 44°)R Accuracy (µm) ±10
From: 2,320,897 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Ball End Type, 2-Flute CBN-EBD
OSG
2-Flute Ball End Type CBN-EBD·Demonstrates high performance in machining high-rigid materials and cast iron·With a wide variety of lineup of CBN tools, you can select one of the best tool for your application.
From: 8,565,563 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Ball End Type, 2-Flute CBN-SXB
OSG
Spiral ball blade with unique torsion that provides a sharp cutting edge and deep cutting at a small diameter. CBN end mill which can be used for cutting with the feel of carbide
From: 4,580,025 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
OSG
A general-purpose ball end mill that can be used for a wide range of work materials and machining. Enables stable continuous processing for many hours thanks to high toughness carbide being used as its base material.
From: 900,582 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
BrandNhãn hiệu |
---|
Product SeriesDòng sản phẩm |
From |
Days to ShipSố ngày giao hàng |
SpecificationsĐặc điểm kĩ thuật |
R Size(mm) |
Blade length (ℓ)(mm) |
Underneck length (ℓ1)(mm) |
Shank diameter (d)(mm) |
Number of flutes(sheet) |
Overall Length (L)(mm) |
work material |
R Precision(μm) |
Machining Application |
Coating |
Type |
You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | |
BrandNhãn hiệu | UNION TOOL | YG 1 | YG 1 | NS TOOL | NS TOOL | NS TOOL | MISUMI | DIJET | MISUMI | UNION TOOL | NS TOOL | MISUMI | MISUMI | OSG | OSG | NS TOOL | MISUMI | UNION TOOL | UNION TOOL | MISUMI | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | OSG | OSG | NS TOOL | NS TOOL | SANDVIK | SANDVIK | SANDVIK | THE CUT | MISUMI | MISUMI | MISUMI | MISUMI | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | OSG | OSG | OSG | OSG | OSG | OSG |
Product SeriesDòng sản phẩm | MRB230 MUGEN-COATING Long Neck Ball End Mill (for Deep Ribbing) | SMB120 CBN Ball End Mill CBN Micro Ball for Ultra-Fine Machining | SHC Series Carbide Ball End Mill, for High-Hardness Steel Machining, 2-Flute / Regular Model | MRB230SF MUGEN-COATING Long Neck Ball End Mill with Short Shank (for Shrink Fitting) | MRC Series Carbide Long Neck Ball End Mill, 2-Flute / Long Neck Model | MRC Series Carbide Ball End Mill, for Heat-Treated Steel Machining, 2-Flute / Regular Model | MRC Series Carbide Ball End Mill, for Heat-Treated Steel Machining, 2-Flute / Short Model | MACH225 MUGEN-COATING High Speed Ball End Mill for Hardened Steels | CoroMill Plura, Center Cut, R216.42-AC-G-1610 (Hardness 43HRc to 63HRc) | CoroMill Plura, Center Cut, R216.42-AK-G-16 (Hardness 43HRc to 63HRc) | Ball End Mill, Center Cut, R216.4 (Hardness 43 HRC to 63 HRC), Cylindrical Shank | Special Coat Solid Carbide End Mills For High Hardness (2 Flutes) IC2RBV | TSC Series Carbide Tapered Neck Ball End Mill, for High-Hardness Steel, 3-Flute / Tapered Neck Model | ||||||||||||||||||||||||||||||||
From | 520,716 VND Special Price On Sale Till 31/05/2024 | 842,338 VND | 1,456,957 VND | 589,345 VND | 607,275 VND | 6,538,762 VND | 715,386 VND Special Price On Sale Till 31/05/2024 | 2,361,137 VND | 437,250 VND | 513,634 VND | 686,354 VND | 3,921,372 VND | 494,588 VND | 2,561,288 VND | 443,333 VND | 5,178,906 VND | 463,676 VND | 546,486 VND | 1,074,285 VND | 461,043 VND | 813,042 VND | 2,050,211 VND | 2,624,435 VND | 2,447,781 VND | 866,943 VND | 975,335 VND | 3,178,183 VND | 3,339,521 VND | 2,840,457 VND | 590,311 VND | 2,514,992 VND | 1,363,947 VND | 544,661 VND Special Price On Sale Till 31/05/2024 | 1,172,523 VND | 1,962,867 VND | 7,987,208 VND | 1,855,065 VND | 4,454,124 VND | 1,680,968 VND | 2,783,385 VND | 2,798,335 VND | 2,320,897 VND | 8,565,563 VND | 4,580,025 VND | 900,582 VND |
Days to ShipSố ngày giao hàng | Same day or more | 4 Day(s) or more | 4 Day(s) or more | 8 Day(s) or more | Same day or more | 12 Day(s) | Same day | 6 Day(s) or more | 4 Day(s) or more | 6 Day(s) or more | 12 Day(s) | 4 Day(s) or more | 4 Day(s) or more | 6 Day(s) or more | Quote | 12 Day(s) | 4 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 4 Day(s) or more | 6 Day(s) or more | 10 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | Same day | 4 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more |
SpecificationsĐặc điểm kĩ thuật | |||||||||||||||||||||||||||||||||||||||||||||
R Size(mm) | 0.05 ~ 3 | 0.01 ~ 12.5 | 0.5 ~ 6 | 0.05 ~ 3 | 0.05 ~ 3 | 0.01 ~ 0.05 | 1 ~ 6 | - | 0.5 ~ 12.5 | 0.03 ~ 6 | 0.1 ~ 1.5 | 0.3 ~ 1 | 0.05 ~ 3 | 0.5 ~ 15 | 0.05 ~ 3 | 0.1 ~ 1 | 0.2 ~ 8 | 0.4 ~ 3 | 0.1 ~ 2 | 0.1 ~ 10 | 0.1 ~ 3 | 5 | 1 ~ 10 | 0.5 ~ 6 | 0.1 ~ 3 | 0.1 ~ 3 | 0.5 ~ 6 | 0.5 ~ 8 | 0.5 ~ 8 | 0.5 ~ 10 | 1 ~ 5 | 0.3 ~ 3 | 0.5 | 0.5 ~ 3 | 0.5 ~ 15 | 0.2 ~ 1 | 0.2 ~ 6 | 0.5 ~ 6 | 0.5 ~ 15 | 3 ~ 6 | 0.1 ~ 2 | 0.2 ~ 1.5 | 3 ~ 6 | 0.2 ~ 1.5 | 0.6 |
Blade length (ℓ)(mm) | 0.08 ~ 4.8 | 0.2 ~ 50 | 2.5 ~ 22 | 0.07 ~ 6 | 0.07 ~ 6 | 0.02 ~ 0.1 | 6 ~ 22 | 7.5 ~ 9 | 1 ~ 25 | 0.06 ~ 22 | 0.15 ~ 2.5 | 0.5 ~ 1.2 | 0.07 ~ 6 | 2.5 ~ 55 | 0.08 ~ 4.8 | 0.15 ~ 1.2 | 1.5 ~ 30 | 0.64 ~ 4.8 | 0.16 ~ 50 | 0.4 ~ 25 | 0.2 ~ 6 | 15 | 5 ~ 38 | 0.7 ~ 8.1 | 0.2 ~ 6 | 0.2 ~ 6 | 1.5 ~ 22 | 1.5 ~ 32 | 1 ~ 16 | 2 ~ 40 | 1 ~ 5 | 0.6 ~ 6 | 1 | 0.8 ~ 4.8 | 1.5 ~ 45 | 0.3 ~ 1.4 | 0.4 ~ 12 | 1.5 ~ 18 | 1.5 ~ 45 | 12 ~ 22 | 0.16 ~ 3.2 | 0.8 ~ 8 | 4 ~ 7 | 0.3 ~ 1.8 | 3 |
Underneck length (ℓ1)(mm) | 0.3 ~ 60 | - | - | 0.3 ~ 50 | 0.2 ~ 50 | - | - | 24 ~ 36 | 2.2 ~ 50 | - | 0.5 ~ 20 | 1.5 ~ 5 | 0.2 ~ 60 | - | 0.3 ~ 50 | 0.9 ~ 20 | - | 3 ~ 30 | 1.5 ~ 62 | - | - | - | - | 5 ~ 60 | 0.5 ~ 15 | 0.5 ~ 15 | 4.5 ~ 15 | 3 ~ 8 | 20 | - | 5 ~ 10 | - | - | 15 ~ 50 | 10 ~ 100 | 1.2 ~ 5.5 | 0.6 ~ 7.5 | - | 3 ~ 80 | - | 1 ~ 30 | - | 20 | 1.2 ~ 6 | - |
Shank diameter (d)(mm) | 3 ~ 6 | 4 ~ 25 | 6 ~ 12 | 4 ~ 6 | 4 ~ 6 | 4 | 6 ~ 12 | - | 4 ~ 25 | 4 ~ 12 | 4 | 4 | 4 ~ 6 | 4 ~ 25 | 4 ~ 6 | - | 4 ~ 16 | 4 ~ 6 | 4 ~ 6 | 4 ~ 20 | 4 ~ 6 | 10 | 4 ~ 20 | 6 ~ 12 | 4 ~ 6 | 4 ~ 6 | 6 ~ 12 | 6 ~ 16 | 4 ~ 16 | 4 ~ 20 | 6 ~ 10 | 6 | 4 | 4 ~ 8 | 4 ~ 32 | 4 ~ 6 | 4 ~ 12 | 4 ~ 12 | 4 ~ 32 | 5 ~ 11 | 6 | 3 | 6 ~ 12 | 4 ~ 6 | 4 |
Number of flutes(sheet) | 2 | 2 | 2 | 2 | 2 | 1 | 2 | 4 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 3 | 2 | 2 | 2 | 2 | 2 | 2 ~ 4 | 2 | 2 | 2 | 2 | 3 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 |
Overall Length (L)(mm) | 45 ~ 120 | 40 ~ 180 | 50 ~ 110 | 45 ~ 120 | 45 ~ 120 | 50 | 50 ~ 110 | - | 40 ~ 180 | 50 ~ 110 | 35 ~ 50 | 50 | 50 ~ 110 | 50 ~ 180 | 45 ~ 120 | 51 ~ 53 | 50 ~ 140 | 45 ~ 80 | 4 ~ 120 | 50 ~ 150 | 45 ~ 120 | 100 | 50 ~ 160 | 60 ~ 110 | 35 ~ 45 | 50 ~ 60 | 57 ~ 83 | 57 ~ 125 | 57 ~ 140 | 50 ~ 150 | 50 ~ 90 | 40 | 40 | 50 ~ 110 | 80 ~ 230 | 50 | 50 ~ 110 | 50 ~ 120 | 50 ~ 200 | 120 ~ 160 | 50 ~ 100 | 40 | 90 ~ 110 | 45 ~ 50 | 50 |
work material | High Hardness Steel-HRC60[◎] | High Hardness Steel-HRC60[○] | High Hardness Steel-HRC60[◎] | High Hardness Steel-HRC60[◎] | High Hardness Steel-HRC60[◎] | High Hardness Steel-HRC60[◎] | High Hardness Steel-HRC60[◎] | High Hardness Steel-HRC60[○] | High Hardness Steel-HRC60[◎] | High Hardness Steel-HRC60[◎] | High Hardness Steel-HRC60[◎] | High Hardness Steel-HRC60[◎] | High Hardness Steel-HRC60[○] | High Hardness Steel-HRC60[○] | High Hardness Steel-HRC60[◎] | High Hardness Steel-HRC60[◎] | High Hardness Steel-HRC60[○] | High Hardness Steel-HRC60[○] | High Hardness Steel-HRC60[○/◎] | High Hardness Steel-HRC60[○] | High Hardness Steel-HRC60[◎] | High Hardness Steel-HRC60[◎] | High Hardness Steel-HRC60[◎] | High Hardness Steel-HRC60[○] | High Hardness Steel-HRC60[◎] | High Hardness Steel-HRC60[◎] | High Hardness Steel-HRC60[○] | High Hardness Steel-HRC60[○] | High Hardness Steel-HRC60[○] | High Hardness Steel-HRC60[○] | High Hardness Steel-HRC60[◎] | High Hardness Steel-HRC60[◎] | High Hardness Steel-HRC60[◎] | High Hardness Steel-HRC60[◎] | High Hardness Steel-HRC60[◎] | High Hardness Steel-HRC60[◎] | High Hardness Steel-HRC60[◎] | High Hardness Steel-HRC60[◎] | High Hardness Steel-HRC60[◎] | High Hardness Steel-HRC60[○] | High Hardness Steel-HRC60[○] | High Hardness Steel-HRC60[○] | High Hardness Steel-HRC60[◎] | High Hardness Steel-HRC60[◎] | High Hardness Steel-HRC60[○] |
R Precision(μm) | -0.005~0.005 ~ -0.002~0.002 | - | - | 0.005~-0.005 ~ 0.01~-0.01 | 0.005~-0.005 | - | ±0.005 | ±8 | ±5 ~ ±10 | -0.007~0.007 ~ -0.002~0.002 | 0.005~-0.005 | ±0.005 | ±0.005 | -0.01~+0.01 | -0.005~+0.005 | -0.003 to 0.003 | ±0.005 ~ ±0.01 | -0.002~0.002 | -0.005~0.005 | ±0.005 ~ ±0.01 | - | -0.01~+0.01 | -0.015~+0.015 | - | 0.005~-0.005 ~ 0.01~-0.01 | 0.005~-0.005 ~ 0.01~-0.01 | - | - | - | - | ±0.01 | -0.005 ~ +0.001 ~ ±0.003 | ±0.005 | -0.007 ~ +0.003 ~ ±0.005 | 0~-0.04 ~ 0~-0.03 | - | - | -0.003~+0.003 | 0~-0.04 ~ 0~-0.03 | -0.01~+0.01 | -0.005~+0.005 | -0.01~+0.01 | -0.01~+0.01 | -0.005~+0.005 | -0.01~+0.01 |
Machining Application | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface | Curved surface | Curved surface | Curved surface / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove |
Coating | For High Hardness (Silicon Group) | AlTiN | BLUE | TiAlN | For High Hardness (Silicon Group) | Non-Coated | For High Hardness (Silicon Group) | Other | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | TiAlN | Non-Coated | MRC | TiAlN | For High Hardness (Silicon Group) | Non-Coated | MRC | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) / For General Steels (AlCrN, etc.) | MRC | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | Other | Other | Other | Other | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | TiAlN | - | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | Non-Coated | Non-Coated | TiAlN |
Type | Long-Neck Ball | Ball | Ball | Long-Neck Ball | Long-Neck Ball | Ball | Ball | Ball | Ball | Ball | Long-Neck Ball | Ball | Long-Neck Ball | Ball | Long-Neck Ball | Long-Neck Ball | Ball | Long-Neck Ball | Tapered neck ball | Ball | Ball | Ball | Ball | Spherical Ball | Ball | Ball | Tapered neck ball | Tapered neck ball | Tapered neck ball | Ball | Ball | Ball | Ball | Tapered neck ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball |
Loading...Tải…
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy