Square Connectors（Applicable pin/contact：Male (plug)）

D-Sub, D02, D02-M15 Series

JAPANAVIATION

A small, lightweight, highly reliable connector for making every type of electronic device smaller and more dense to support advanced features.[Features]・The D-sub connector is becoming the standard with its combination of pin and socket connector types.・Interchangeable with different connector types and commonly used accessories.・The shell joint shape has polarity, fully preventing accidental reverse insertion.・The DO2 series is a high-density mounting connector with approximately twice as many contacts inside the same shell size as the D-sub.・The outer appearance is short and compact. The contact and insulation material is contained in a hard, steel shell.・There are 5 shell sizes (E, A, B, C, and D), which come with 9, 15, 25, 37, and 50 cores. Special arrays with coaxial and high-current contacts are also available.

HIF3B Series MIL Standard-Compliant Ribbon Cable Connector

HIROSE ELECTRIC

MIL standard-compliant rectangular ribbon cable connector.[Features]· HIF3B series products are developed to comply with the MIL standard and can be used in a wide range of applications.· Compatible with HIF3 series.· HIF3B series products are UL-listed connectors.· Features a mechanism to prevent mis-insertion.· A form in which inserting the guide key (polarity key) on the pin header side creates a convex section that fits into the concave section (polarity keyway) of the socket. (MIL standard)· A form in which the mis-insertion prevention guide (polarity guide) on the socket side fits into the slot (polarity slot) on the pin header side.· A system that embeds the polarizing key in the socket hole and guides it.· A guide system in which the convex section on the socket side (HIF3A type) combines with the slot located in the center of the pin header side.· The compatible wire (UL2651) is an AWG#28 ribbon cable (7-core/0.127 mm, jacket diameter of 0.9 ± 0.2 mm).[Applications]· A wide variety of models are available, enabling use with a wide range of equipment.

DF11 Series 2‑mm Grid Double-Row Connector (UL/CSA Standard Certified Product)【1-500 Pieces Per Package】

HIROSE ELECTRIC

[Features]· The contact configuration has been condensed into 2 rows with a 2-mm pitch and 5-mm width.· Allows for twice the number of signals with the same amount of space as a conventional 2‑mm pitch single-row connector.· Available with either crimped or IDC contacts. Board-to-cable, in-line and board-to-board connector types are also available, enhancing board design flexibility.· Choose from gold or tin plating to match application. SMT-compatible products are also available.· Accommodates 22 AWG to 30 AWG wires even with a compact 2‑mm double-row design.· Reduce man-hours and eliminate manual work processes for easy wiring by using a fully-automatic IDC machine, even for tedious multi-harnessing (branch wire connections).[Applications]· For all types of OA equipment, including copy machines and printers.

• Volume Discount

Solder/Press Contact (Low Cost) D-Sub Connector

MISUMI

D-sub connector. Same product quality as Japanese products with dimple processing and plated pin finishing

• Volume Discount

CAD ：

2D

D-Sub Connectors - XM2/XM3

OMRON

These D-sub connectors are ideal for use with OA equipment interfaces. [Features]· Shielded connector for use in EMI countermeasures.· The metalized plastic hood (Model XM2S) provides excellent noise protection.· Multi-hole ferrite core equipped types (Model XM3B-F) are also available.· Offers a space-saving design and superior noise protection at high frequencies.· A wide variety of mounting brackets and grounding fixtures are available.· Conforms to UL standards (File No. E103202) as standard (excluding the Model XM2S and some other products.) [Applications]· Small and tough-wearing structure with a metal shell

Discrete Wire Connector for Connection, DF1B Series (2.5 mm Pitch)【1-10,000 Pieces Per Package】

HIROSE ELECTRIC

[Features]· A new type of connector in which IDC terminals are inserted into the case.· By using both crimp terminals and IDC terminals, wires with different current capacities can be used in the same case.· Terminals can be replaced after connection, providing excellent maintainability.· IDC part is protected by the case to provide a high level of reliability.· No need for an expensive IDC machine as IDC work can be performed by simply replacing the applicator on a conventional crimping machine.· High-profile headers are also available for supporting board potting (filling with resin) performed as a waterproofing measure.· Single-row and double-row contact configurations with standard tin or gold plating for each of the “board-to-cable” and “in-line” series products.[Applications]· Convenient for various types of wiring.· For all types of OA equipment, including copy machines and printers.

Half Pitch Interface Connector, DX Series

HIROSE ELECTRIC

I/O Connector with a 1.27-mm pitch (Hirose Electric Original Type). A selection of two types of lock methods and abundant variations for wire connection and implementation methods are available.

57 Series Soldering/DIP-Type Connector

DDK

A 2.159-mm pitch ribbon-type connector for soldering. These are the core of the 57 family of connectors, which are available in 5 types.[Features]■ This 57 Series forms the core of the 57 family of DIP connectors. The following 5 types are available.· 57-10 type (unit connection plug).· 57-20 type (unit connection receptacle).· 57-30 type (plug with straight hood for cables).· 57-40 type (panel receptacle with locking spring).· 57-60 type (cable relay receptacle).

IEEE1284, Half-Pitch Connector, EMI-Countermeasure Solder Male Connector

MISUMI

High-speed Transfer Supporting Solder Model Half-pitch I/O Connector

• Volume Discount

CAD ：

2D

Half-Pitch Multi-Function 2-Piece Connector, FX2 Series

HIROSE ELECTRIC

Combination offers various connections for board-to-board (stacking, horizontal, vertical) and ribbon cable connections.

Discrete Wire Connector for Connection, DF3 Series (2 mm Pitch)【1-100 Pieces Per Package】

HIROSE ELECTRIC

Connector for board-to-cable, cable-to-cable, and board-to-board connections with 2-mm pitch 1 terminal row. Can use for a wide range of equipment.In-stock items are custom products, therefore returns and cancellations are not possible. Thank you.

D-Sub Connector (Solder Termination Type), HD Series

HIROSE ELECTRIC

A solder connection type D-sub connector. Terminal connection portion has a solder cup for the easy attachment of every cable type.[Features]· Small and lightweight connector due to metal shell.· The solder attachment side has a solder cup construction for easy soldering. It is also optimal for wires up to a maximum size of AWG#20.· The insulation material is heat/chemical resistant and uses the excellent PBT resin (UL94V-O) containing glass.· CTF, CTH, and other plug case types can be used. Straight dip (SD type), right angle dip (RD type), and ribbon pressure (FD type) connections can be used.

Solder and Press Contact PLC D-Sub Connector

MISUMI

Used with Mitsubishi Electric Q series which is highly trusted in Japan

• Volume Discount

CAD ：

2D

MIXO Modular Insert & Contact

ILME

[Features]· MIXO.· MIXO modular inserts and contacts.· Supports large currents up to 200 A, high voltage up to 5, 000 V, high density, air piping, LANs, and USBs.· Supports optical fiber, coaxial, and Dsub9Pin connectors.

Interface Connector / D-Sub D-Sub Connector

HARTING

HARTING, rectangular connector, interface connector; D-Sub D-Sub connection

Centronics Solder Spring-lock Connector (Male)

MISUMI

[Features]A Centronics male connector with a lineup of low-priced products. This is a connector that is used for connecting to a panel by attaching cable with solder.

• Volume Discount

CAD ：

2D

EMI Countermeasure Solder/Machine Contact D-Sub Connector

MISUMI

Has a machine contact for plug-in and removal durability, and bead processing ensures a firm contact with the partner

• Volume Discount

CAD ：

2D

SUMICON 1600 Series Multi-Contact Rectangular Connector【1-100 Pieces Per Package】

HIROSE ELECTRIC

A rectangular multi-contact connector manufactured using a unique HIROSE design.[Features]· Nine contact configurations (8, 12, 16, 20, 24, 28, 34, 45, 60) are available. Solder type, wrapping type and crimp type connector units are available.· Accessories include C case, CA case, CBA case, ST stopper, STA stopper, STB stopper, etc. that can be combined for use in a wide range of applications.· The connector unit and accessories (cases, stoppers) are completely separate in the SUMICON 1600 series. This means that they can be combined for a variety of uses as well as enabling easier wiring connections.· These connectors are specified in the NTT specifications, “Spec. No. 1931.”

SMW250-NN【100 Pieces Per Package】

YEONHO ELECTRONICS

[Ilme Insert]CQ 6.5-40 A/50-400 V Crimp Type

ILME

Single-action, ultra-high density connector CQ Series.[Features]・ High reliability and operability are important for information wiring such as teach pendants and operation panels, which are frequently accessed by users.・ The CQ Series, which uses the proven Ilme rectangular connector technology, improves usability and reliability.

2.5‑mm Pitch Connector For Discrete Wire Connection, HNC Series

HIROSE ELECTRIC

A connector for 2.5-mm pitch discrete wire connections. Thin type for right-angle mounting at a height of 4.8 mm. Includes mechanism for total locking and mis-insertion prevention.[Features]・Including total lock mechanism: total lock mechanism refers to the process of first releasing the lock on both sides before being able to remove the connector. This is effective in preventing accidental disconnection due cable pulling and other mistakes.・Thin type: mount height when used at a right angle: 4.8 mm.・Construction that prevents mis-insertion: Mis-insertion is prevented by the thin-type mechanism.・Tin and gold plating variations: With the 2 options of tin and gold, the ideal metal may be selected depending on intended use.・Further, there are settings available to provide a light feel even if tin plating is used.

D-sub Connector, Crimped Housing

MISUMI

Crimp connection model that makes consistent workmanship quality possible

CAD ：

2D

Solder/Machine Contact (Low Cost) D-Sub Connector

MISUMI

D-sub connector. Same product quality as Japanese products with adoption of machine contacts, dimple processing and plated pin finishing

• Volume Discount

CAD ：

2D

PCR Series

HONDA TSUSHIN KOGYO

1.27 mm pitch high density rectangular connector.[Features]·Robust and ideal for interfaces due to the metal shell and metal case.·There is a wide range of contact numbers, 20 to 96 contacts for board-to-cable connection and 20 to 128 contacts for board-to-board connection.·The housing guide mechanism allows parallel mating and prevents short circuits between adjacent contacts.·For FCC and other EMI countermeasures.·Live line connection (3 steps) is also available.·Ideal for horizontal, parallel and vertical connections.·Rated Voltage: 250 V AC (r.m.s.), rated current: 1 A / pin, contact resistance: 35 mΩ or less.[Applications]·Can be used for office equipment, factory automation equipment, measuring instruments, communication equipment, and various compact equipment.

Discrete Wire for Connection, DF1E Series (2.5 mm Pitch)【1-100 Pieces Per Package】

HIROSE ELECTRIC

A board-to-cable, cable-to-cable connector with a lock (2.5-mm pitch). The inner locking type mechanism prevents the connector from disconnecting due to impact.In-stock items are custom products, therefore returns and cancellations are not possible. Thank you.

CNE / CSE / CCE Common Use Screw Type, Spring Type, Pressure Bonding Type 16A / 500V Insert

ILME

CNE / CSE / CCE, general purpose screw type / spring type / crimped type, 16A / 500V, insert[Features]・CNE/CSE/CCE.・General purpose screw type / spring type / crimped type.▪ 16A / 500V.▪ Insert

Misumi, Waterproof, E-Model Connector (Screw Wire Connection)

MISUMI

[Features]MISUMI's original, low-cost, environment-resistant, and waterproof E-type connector. Due to cable connection by screws, it can be easily connected with just a slotted screwdriver without the need for dedicated tools. The screw connection is equipped with a contact. Please confirm the type and male or female before ordering.

• Volume Discount

CAD ：

2D

MR Male Connector

MISUMI

High-density MR Male Connector

• Volume Discount

CAD ：

2D

Han, Industrial Connector Inserts, Accessory Q Series

HARTING

Han, Industrial Connector Inserts, Accessory Q Series

Centronics Press-fit Spring-lock Connector (Male)

MISUMI

Labor-saving Pressure Welding Spring-lock Male Connector

• Volume Discount

CAD ：

2D

1.78‑mm Pitch Rectangular Interface Connector QM Series

HIROSE ELECTRIC

Terminal opening and connection portion both possess a 1.78-mm pitch grid array, small size, and high density. Terminals are constructed with a ribbon shape, making them strong against prying and ensured for 1,000 insertions and extractions.[Features]· Terminal opening and connection portion both possess a 1.78-mm pitch grid array for use with small electric devices.· Terminals are constructed with a ribbon shape, making them strong against prying and ensured frequent insertions and extractions.· Able to be press welded when bunched with 0.89-mm (.35°) pitch cable (No.30 AWG) in an attempt to reduce work effort.· The dip connector, along with a construction that allows the grounding of electrical interference waves arising from the cable and connector on the circuit board surface, includes a circuit board snap stop.· The cover case is made of a die cast zinc amalgam effective in blocking electromagnetic waves, and a receptacle side bracket is included for effective noise reduction.· There are two types of cover case: hood type and lock (bevel opening) type. The lock type allows for single-action operation.

2.54-mm Pitch Low Profile Connector, HIF3FB and HIF3FC Series

HIROSE ELECTRIC

A 2.54-mm pitch RoPro file board-to-board (stacking or perpendicular) and board-to-cable connector.[Features]・Prevents flux oozing: HIF3FC series straight type connectors have methods in place to prevent flux oozing.・Low profile: pin heads are at a low height of 9.2 mm.・The space between circuit boards when stacking is 12.2 mm.

Han D / DD Series Connector (Crimp Connection)

HARTING

Available in a wide range of variations in the number of pins. Ideal power source connector for use in harsh environments. Crimp connection for reliable connection (Models are separated using "-" rather than spaces).

2.00-mm Pitch Serial I/O Connector

MOLEX

A Molex 2.0 mm pitch connector for external relay connection.

Han Waterproof E-Model Connector (Screw Connection)

MISUMI

E Model Connector

• Volume Discount

CAD ：

2D

HE Series, Universal Connector

WEIDMULLER

A 6-pole connector with multiple connection methods (500 V, 24 A, number of poles: 6 (+ PE), screw / spring / crimp / push-in)

1.25-mm Pitch Miniature Crimp Connector (UL Standard Certified Product), DF13 Series【1-100 Pieces Per Package】

HIROSE ELECTRIC

Connector for board-to-cable connection with 1.25-mm pitch. Choose from a number of variations from 2–40 pin, straight-mount, right-angle mount, DIP, and SMT.[Features]· Small.· A low-profile design with a mounting height of 5.8 mm. (The SMT mounting is a straight type, the DIP type is a straight 5.3-mm, and the right-angle type is 3.6-mm.)· Multipole· The dual-row type is a multipole connector with up to 40 pins. It is a high-density connector with a surface area of 30% compared to the single-row type.· Supports automatic mounting.· The header is available with a suction surface that supports vacuum suction . Therefore, automatic mounting using embossed packing is possible.· Complete basic functionality despite compact form factor.· The header includes a box structure to prevent twisting and ensure incorrect insertion is completely prevented.· Additionally, the Surface Mount (SMT) header is fitted with a reinforcement bracket to prevent solder from peeling.In-stock made-to-order products cannot be returned or canceled. Thank you for your understanding.

CD Type, Crimp Type Connector, CD Series【1-100 Pieces Per Package】

HIROSE ELECTRIC

A crimped wire connection type D-sub connector. The cable can be connected to #20–28 AWG (using two types of terminal pins).[Features]· Has a metal shell and so is small and lightweight.· Connector mounting can be performed on the chassis, front or back, or one of the sides.· The attaching and detaching of the terminals is done by pressing the retainer sideways. Therefore, no special extraction tool is required.· The insulator uses a UL material synthetic resin with excellent heat-resistant, chemical-resistant properties.In-stock items are custom products, therefore returns and cancellations are not possible. Thank you. Returns and cancellations are not possible. Thank you for your understanding.

17JE Series Soldering Type Connector

DDK

17 Series (Dsub type) soldering connection type square connector for cable equipment. [Features]· Square connector for solder wire connections, with solder cup type contact.· Ni plating is used for the metal shell surface treatment, and the pin connector is bead treated.· The hood is metalized plastic, which provides weight reduction and a high shielding effect.· Either the pin connector or the socket connector can be selected.· There are 4 shell sizes: 9, 15, 25, and 37. The core counts are 9 cores, 15 cores, 25 cores, and 37 cores.· The cable and plug wire connection can be shielded with a metalized hood, which is effective as an EMI measure. [Applications]· Can be used as an interface for equipment and devices. Optimal for use on twisted wire of AWG22 or less.

CAD ：

2D

Han Q Series Connector (Crimp Connection)

HARTING

This series is even smaller than the Han A series. Saves space, as the connector outer diameter is the same size even if the number of wires increases (Models are separated using "-" rather than spaces).

[Ilme Insert]CDD 10 A/250 V High Density Crimp Type

ILME

[Features]・ This is a standard Series of general-purpose Ilme’s connectors.・ It can be used with higher density and space-saving wiring.・ Normally, it can be used up to 250 V, but it can be used at higher voltage (500 V) by reducing the number of contact pins used and arranging it properly.

EMI Countermeasure Solder/Press Contact D-sub Connector

MISUMI

Entire shell has been nickel-plated as an EMI countermeasure, and dimple processed to ensure a firm contact with the partner

• Volume Discount

CAD ：

2D

MR Series

HONDA TSUSHIN KOGYO

Small-type/multi-pin connector developed for use with data devices which uses wide-type terminals with exceptional reliability.[Features]· Dual screw and a spring lock mechanism that can withstand any shock.· Dust-proof mechanism with excellent environmental resistance.· Optimal for device miniaturization via improvement of robustness, compactness, weight and density.· A relay type case is also provided

1.27‑mm Pitch Two-Piece Connectors, HIF6 Series

HIROSE ELECTRIC

Board-to-board and board-to-cable connection variations available. Uses a flat-type cable with 1.27-mm pitch, so it can be used with each type of connector.[Features]・Product variation: connection methods include board-to-board model and cable pressure connection.・Wide range of use: using flat-type cable with 1.27-mm pitch, it can be used with HIF2E, HIF3B, HIF5, etc.・Compatible cables: AWG#28 flat cable (7/0.127 mm, outer diameter 0.8 - 1.0 mm).・Construction that prevents mis-insertion: mis-insertion prevention guide prevents accidental insertion.

MX31 Series

JAPANAVIATION

The number of pins in these connectors has increased along with the greater role of electronic control in automobiles. In addition, this non-waterproof, high-density type connector fulfills the need for a small and lightweight product.[Features][High-density implementation achieved with a large number of pins]· These composite-type connectors include both signal (2.2 A) and power (5.7 A) internal circuits in the same connectors. These four-row type connectors are small, highly dense, and include a large number of pins with a 2.2 mm contact pitch (for signals), 3.2 mm contact pitch (for power), and up to a maximum of 135-pin connectors. Multiple socket connectors are combined together on the wire side for each single pin header on the circuit board side.[Mechanical lock structure ensures secure fitting]· The mechanical lock structure protects against vibrations and pulling. A distinct click sound helps confirm that secure fitting has occurred.[Double locking structure reliably prevents loss of contact]· Contact with the socket housing is maintained via a housing lance and an internal retainer contained in the housing. This double locking structure, which locks at two locations, reliably prevents loss of contact due to vibration or pulling.· The retainer's structure ensures that a contact cannot be set into the locking position unless it is completely inserted. This makes it possible to detect partial insertion of contacts.[Low insertion force structure with easy insertion and extraction]· A low insertion force type structure requiring 70 N or less of force per socket housing to achieve insertion makes insertion and extraction easy.[Tin and gold plating are available for the contact finish]· The standard finish for contacts is tin plating. Gold plating is also available for 135-pin pin headers, offering a higher level of contact reliability.[Misconfiguration-prevention ...