Stainless Steel Threaded Pipe Fitting, Pipe Nipple

:
YODOSHI

  • The image is a representative image of the double nipple (model: NI-) type. Please refer to the product information for images of the single nipple (model: KNI) type.
  • MISUMI does not support alteration, custom order, or similar requests.

Threaded fitting that is prefabricated by the manufacturer in lengths that are often used in piping.
[Features]
·Prefabrication in lengths that are often used for piping reduces the labor of on-site workers.
·With a large line-up of lengths, it is possible to support a variety of designs.
·Stainless steel threaded pipe fitting pipe nipple manufactured by YODOSHI Corporation, a company with a top-class quality and a proven track record in Japan.
·Operating fluid: Water, Air, Steam, Chemicals, Oil.
[Applications]
·Threaded fitting used to connect pipes.
·With a lineup of commonly used lengths, it is suitable for fine piping.

Product image

Product image Double nipple

Double nipple Model: NI
Material: SUS304

Product image Single nipple

Single nipple model: KNI
Material: SUS304

Drawing

Double nipple Model: NI

Single nipple Model: KNI

Specifications Table

Common to double nipple and single nipple
*1 The dimensions may vary slightly.
[ ! ]MISUMI does not support alteration, custom order, or similar requests.

Usage Example

(Reference value)
Stainless Steel Threaded Pipe Fitting, Pipe Nipple, Tightening torque

Note
1 Number of threads tightened up to the position of the gauge diameter.
2 Number of threads tightened from the position of the gauge diameter.
3 Nominal dimensions of 3B or less are for pipe wrenches, and 4B is for a chain pipe wrench.

Cautions and Prohibitions

* Be sure to use a liquid sealant for stainless steel.
* Forcibly screwing it in may cause galling or seizure at the joints, resulting in leaks.
*Once screwed in, adjusting the pipe angle in the direction of loosening will cause leakage, so avoid doing so.
If it is unavoidable to unscrew it, do so within 45°.
In addition, never unscrew the screw after the liquid sealant has hardened.
*For re-installation, please remove the sealant and apply a new sealant.
* After completing the piping, be sure to perform a leak testing to confirm that there are no leaks.