(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.

Tel: 0222-361-1555 Email: cs@misumi.com.vn 8:00 - 17:00 (Mon - Sat)

ものづくりの、明日を支える。MISUMI-VONA 生産材コマース ものづくりの、明日を支える。MISUMI-VONA 生産材コマース

Webcode Seach | Series: #CODE

Keyword suggestionsTừ khóa gợi ý

Part number suggestionsGợi ý mã sản phẩm

Discontinued Products

Search by Category / Brand Tìm theo danh mục, nhãn hiệu

Search by Category Tìm theo danh mục

MISUMI Việt Nam đẩy mạnh hợp tác với cơ sở đào tạo nhằm nâng cao chất lượng nguồn nhân lực kỹ sư tương lai. Xem chi tiết.
MISUMI Vietnam cooperates with Training Institutions to enhance the quality of future engineering workforce. See more.

How can we improve?

How can we improve?

Comments

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy

Thank you for your cooperation.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.

Customer Privacy Policy

ConfigureTạo

Part number has not been determine

(319 Part Numbers Available)

Configure Remaining SpecificationsĐịnh cấu hình các thông số còn lại

Part Number CompleteĐã hoàn thành

XAL-PEM2LB2-30

Outer Diameter (D) Flute Length (ℓ) Shank Diameter (d) Overall Length (L) Length Under Neck (ℓ1) Geometry type Days to Ship

Specification/DimensionsĐặc điểm kỹ thuật / Kích thướcĐặc điểm kỹ thuật / Kích thước

Outer Diameter (D)(φ)
0.1

0.2

0.3

0.4

0.5

0.6

0.7

0.8

0.9

1

1.2

1.4

1.5

1.6

1.8

2

2.5

3

4

5

6
ClearTrống
Flute Length (ℓ)(mm)
0.2

0.3

0.45

0.6

0.7

0.9

1.05

1.2

1.35

1.5

1.8

2.1

2.3

2.4

2.7

3

3.8

4.5

6

7.5

9
ClearTrống
Shank Diameter (d)(mm)
4

6
ClearTrống
Overall Length (L)(mm)
50

70

100
ClearTrống
Length Under Neck (ℓ1)(mm)
0.3

0.5

1

1.5

2

2.5

3

3.5

4

5

6

7

8

9

10

12

14

15

16

18

20

22

24

25

26

30

35

40

45

50

60
ClearTrống
Geometry
- Sharp Corner
- With Lead
ClearTrống
type
- XAL-EM2LB
- XAL-PEM2LB
ClearTrống

Days to ShipSố ngày giao hàng

Alltất cả các

Same day

4 Day(s) or Less

8 Day(s) or Less
ClearTrống

Specify AlterationsChỉ định thay đổi

(Economy series) XAL Coated Carbide Long Neck Square End Mill, 2-Flute / Long Neck Model (Part Number)

Volume Discount

Brand :

MISUMI

Part Number :

XAL-PEM2LB2-30

XAL-PEM2LB2-35

XAL-PEM2LB2-40

XAL-PEM2LB2-50

XAL-PEM2LB2-60

XAL-PEM2LB2.5-8

XAL-PEM2LB2.5-10

XAL-PEM2LB2.5-12

XAL-PEM2LB2.5-14

XAL-PEM2LB2.5-16

XAL-PEM2LB2.5-18

XAL-PEM2LB2.5-20

XAL-PEM2LB2.5-25

XAL-PEM2LB2.5-30

XAL-PEM2LB2.5-40

XAL-PEM2LB2.5-50

XAL-PEM2LB3-8

XAL-PEM2LB3-10

XAL-PEM2LB3-12

XAL-PEM2LB3-14

XAL-PEM2LB2-30

Order Qty :
Price :

---
Total Price :

---
Days to ship :

---

Select part number to Order Now/ Add to Cart

Product Description

The long-awaited long-neck type joins the popular XAL Series

XAL Coated Carbide Long Neck Square End Mill, 2-Flute / Long Neck Model:Related Image

: 30; 60; 90

Part Number
XAL-PEM2LB2-30
XAL-PEM2LB2-35
XAL-PEM2LB2-40
XAL-PEM2LB2-50
XAL-PEM2LB2-60
XAL-PEM2LB2.5-8
XAL-PEM2LB2.5-10
XAL-PEM2LB2.5-12
XAL-PEM2LB2.5-14
XAL-PEM2LB2.5-16
XAL-PEM2LB2.5-18
XAL-PEM2LB2.5-20
XAL-PEM2LB2.5-25
XAL-PEM2LB2.5-30
XAL-PEM2LB2.5-40
XAL-PEM2LB2.5-50
XAL-PEM2LB3-8
XAL-PEM2LB3-10
XAL-PEM2LB3-12
XAL-PEM2LB3-14
XAL-PEM2LB3-16
XAL-PEM2LB3-18
XAL-PEM2LB3-20
XAL-PEM2LB3-25
XAL-PEM2LB3-30
XAL-PEM2LB3-40
XAL-PEM2LB3-45
XAL-PEM2LB3-50
XAL-PEM2LB4-12
XAL-PEM2LB4-16
XAL-PEM2LB4-20
XAL-PEM2LB4-25
XAL-PEM2LB4-30
XAL-PEM2LB4-35
XAL-PEM2LB4-40
XAL-PEM2LB4-45
XAL-PEM2LB4-50
XAL-PEM2LB5-16
XAL-PEM2LB5-20
XAL-PEM2LB5-25
XAL-PEM2LB5-30
XAL-PEM2LB5-35
XAL-PEM2LB5-40
XAL-PEM2LB5-50
XAL-PEM2LB6-20
XAL-PEM2LB6-30
XAL-PEM2LB6-40
XAL-PEM2LB6-50
XAL-PEM2LB6-60

Price	Minimum Order Qty.	Volume Discount	Days to ShipSố ngày giao hàng	Outer Diameter (D) (φ)	Flute Length (ℓ) (mm)	Shank Diameter (d) (mm)	Overall Length (L) (mm)	Length Under Neck (ℓ1) (mm)	Geometry	Figure	Under Neck Diameter d1 (mm)	Actual Effective Length Depends on Work Inclination Angle 30' (mm)	Actual Effective Length Depends on Work Inclination Angle 1° (mm)	Actual Effective Length Depends on Work Inclination Angle 2° (mm)	Actual Effective Length Depends on Work Inclination Angle 3° (mm)	Length Under Neck (θ)
420,590 VND	1 Piece(s)	Available	4 Day(s) or more	2	3	4	70	30	Sharp Corner	1	1.95	31.41	32.97	Without Interference	Without Interference	10°
485,857 VND	1 Piece(s)	Available	4 Day(s) or more	2	3	4	100	35	Sharp Corner	1	1.95	36.65	38.46	Without Interference	Without Interference	10°
594,914 VND	1 Piece(s)	Available	4 Day(s) or more	2	3	4	100	40	Sharp Corner	1	1.95	41.88	43.96	Without Interference	Without Interference	10°
704,598 VND	1 Piece(s)	Available	4 Day(s) or more	2	3	4	100	50	Sharp Corner	1	1.95	52.35	54.95	Without Interference	Without Interference	10°
943,565 VND	1 Piece(s)	Available	4 Day(s) or more	2	3	4	100	60	Sharp Corner	1	1.95	62.83	Without Interference	Without Interference	Without Interference	10°
344,062 VND	1 Piece(s)	Available	4 Day(s) or more	2.5	3.8	4	50	8	Sharp Corner	1	2.4	8.38	8.79	9.76	10.98	10°
347,607 VND	1 Piece(s)	Available	4 Day(s) or more	2.5	3.8	4	50	10	Sharp Corner	1	2.4	10.47	10.99	12.21	13.73	10°
344,062 VND	1 Piece(s)	Available	4 Day(s) or more	2.5	3.8	4	50	12	Sharp Corner	1	2.4	12.57	13.19	14.65	Without Interference	10°
347,607 VND	1 Piece(s)	Available	4 Day(s) or more	2.5	3.8	4	50	14	Sharp Corner	1	2.4	14.66	15.39	17.09	Without Interference	10°
344,062 VND	1 Piece(s)	Available	4 Day(s) or more	2.5	3.8	4	50	16	Sharp Corner	1	2.4	16.75	17.58	19.53	Without Interference	10°
348,232 VND	1 Piece(s)	Available	4 Day(s) or more	2.5	3.8	4	70	18	Sharp Corner	1	2.4	18.85	19.78	Without Interference	Without Interference	10°
344,688 VND	1 Piece(s)	Available	4 Day(s) or more	2.5	3.8	4	70	20	Sharp Corner	1	2.4	20.94	21.98	Without Interference	Without Interference	10°
398,695 VND	1 Piece(s)	Available	4 Day(s) or more	2.5	3.8	4	70	25	Sharp Corner	1	2.4	26.18	27.47	Without Interference	Without Interference	10°
398,695 VND	1 Piece(s)	Available	4 Day(s) or more	2.5	3.8	4	70	30	Sharp Corner	1	2.4	31.41	32.97	Without Interference	Without Interference	10°
497,743 VND	1 Piece(s)	Available	4 Day(s) or more	2.5	3.8	4	100	40	Sharp Corner	1	2.4	41.88	Without Interference	Without Interference	Without Interference	10°
701,053 VND	1 Piece(s)	Available	4 Day(s) or more	2.5	3.8	4	100	50	Sharp Corner	1	2.4	52.35	Without Interference	Without Interference	Without Interference	10°
486,275 VND	1 Piece(s)	Available	4 Day(s) or more	3	4.5	6	50	8	Sharp Corner	1	2.9	8.38	8.79	9.76	10.98	10°
492,113 VND	1 Piece(s)	Available	4 Day(s) or more	3	4.5	6	50	10	Sharp Corner	1	2.9	10.47	10.99	12.21	13.73	10°
486,275 VND	1 Piece(s)	Available	4 Day(s) or more	3	4.5	6	50	12	Sharp Corner	1	2.9	12.57	13.19	14.65	16.48	10°
493,573 VND	1 Piece(s)	Available	4 Day(s) or more	3	4.5	6	70	14	Sharp Corner	1	2.9	14.66	15.39	17.09	19.22	10°
487,526 VND	1 Piece(s)	Available	4 Day(s) or more	3	4.5	6	70	16	Sharp Corner	1	2.9	16.75	17.58	19.53	21.97	10°
493,573 VND	1 Piece(s)	Available	4 Day(s) or more	3	4.5	6	70	18	Sharp Corner	1	2.9	18.85	19.78	21.97	24.71	10°
487,526 VND	1 Piece(s)	Available	4 Day(s) or more	3	4.5	6	70	20	Sharp Corner	1	2.9	20.94	21.98	24.41	27.46	10°
491,070 VND	1 Piece(s)	Available	4 Day(s) or more	3	4.5	6	70	25	Sharp Corner	1	2.9	26.18	27.47	30.51	Without Interference	10°
509,004 VND	1 Piece(s)	Available	4 Day(s) or more	3	4.5	6	70	30	Sharp Corner	1	2.9	31.41	32.97	36.62	Without Interference	10°
576,565 VND	1 Piece(s)	Available	4 Day(s) or more	3	4.5	6	100	40	Sharp Corner	1	2.9	41.88	43.96	Without Interference	Without Interference	10°
662,477 VND	1 Piece(s)	Available	4 Day(s) or more	3	4.5	6	100	45	Sharp Corner	1	2.9	47.12	49.45	Without Interference	Without Interference	10°
765,695 VND	1 Piece(s)	Available	4 Day(s) or more	3	4.5	6	100	50	Sharp Corner	1	2.9	52.35	54.95	Without Interference	Without Interference	10°
467,299 VND	1 Piece(s)	Available	4 Day(s) or more	4	6	6	50	12	Sharp Corner	1	3.8	12.57	13.19	14.65	16.48	10°
467,299 VND	1 Piece(s)	Available	4 Day(s) or more	4	6	6	50	16	Sharp Corner	1	3.8	16.75	17.58	19.53	Without Interference	10°
468,550 VND	1 Piece(s)	Available	4 Day(s) or more	4	6	6	70	20	Sharp Corner	1	3.8	20.94	21.98	24.41	Without Interference	10°
478,768 VND	1 Piece(s)	Available	4 Day(s) or more	4	6	6	70	25	Sharp Corner	1	3.8	26.18	27.47	Without Interference	Without Interference	10°
468,550 VND	1 Piece(s)	Available	4 Day(s) or more	4	6	6	70	30	Sharp Corner	1	3.8	31.41	32.97	Without Interference	Without Interference	10°
480,435 VND	1 Piece(s)	Available	4 Day(s) or more	4	6	6	100	35	Sharp Corner	1	3.8	36.65	38.46	Without Interference	Without Interference	10°
583,029 VND	1 Piece(s)	Available	4 Day(s) or more	4	6	6	100	40	Sharp Corner	1	3.8	41.88	43.96	Without Interference	Without Interference	10°
721,697 VND	1 Piece(s)	Available	4 Day(s) or more	4	6	6	100	45	Sharp Corner	1	3.8	47.12	49.45	Without Interference	Without Interference	10°
859,322 VND	1 Piece(s)	Available	4 Day(s) or more	4	6	6	100	50	Sharp Corner	1	3.8	52.35	54.95	Without Interference	Without Interference	10°
618,686 VND	1 Piece(s)	Available	4 Day(s) or more	5	7.5	6	70	16	Sharp Corner	1	4.8	16.75	17.58	Without Interference	Without Interference	10°
599,711 VND	1 Piece(s)	Available	4 Day(s) or more	5	7.5	6	70	20	Sharp Corner	1	4.8	20.94	21.98	Without Interference	Without Interference	10°
581,361 VND	1 Piece(s)	Available	4 Day(s) or more	5	7.5	6	70	25	Sharp Corner	1	4.8	26.18	27.47	Without Interference	Without Interference	10°
599,711 VND	1 Piece(s)	Available	4 Day(s) or more	5	7.5	6	70	30	Sharp Corner	1	4.8	31.41	Without Interference	Without Interference	Without Interference	10°
583,029 VND	1 Piece(s)	Available	4 Day(s) or more	5	7.5	6	100	35	Sharp Corner	1	4.8	36.65	Without Interference	Without Interference	Without Interference	10°
496,492 VND	1 Piece(s)	Available	4 Day(s) or more	5	7.5	6	100	40	Sharp Corner	1	4.8	41.88	Without Interference	Without Interference	Without Interference	10°
951,698 VND	1 Piece(s)	Available	4 Day(s) or more	5	7.5	6	100	50	Sharp Corner	1	4.8	52.35	Without Interference	Without Interference	Without Interference	10°
591,995 VND	1 Piece(s)	Available	4 Day(s) or more	6	9	6	70	20	Sharp Corner	1	5.8	Without Interference	Without Interference	Without Interference	Without Interference	-
622,648 VND	1 Piece(s)	Available	4 Day(s) or more	6	9	6	70	30	Sharp Corner	1	5.8	Without Interference	Without Interference	Without Interference	Without Interference	-
704,598 VND	1 Piece(s)	Available	4 Day(s) or more	6	9	6	100	40	Sharp Corner	1	5.8	Without Interference	Without Interference	Without Interference	Without Interference	-
873,501 VND	1 Piece(s)	Available	4 Day(s) or more	6	9	6	100	50	Sharp Corner	1	5.8	Without Interference	Without Interference	Without Interference	Without Interference	-
1,165,642 VND	1 Piece(s)	Available	4 Day(s) or more	6	9	6	100	60	Sharp Corner	1	5.8	Without Interference	Without Interference	Without Interference	Without Interference	-

Loading...Tải…

Specifications

Model Number
XAL-PEM2LB (Sharp Edge) / XAL-EM2LB (Standard)

Flute Diameter D	Length Under Neck ℓ1	Shank Diameter d	Shank Diameter d	Standard	Sharp Edge	Blade Length ℓ	Under Neck Diameter d1	Overall Length L	Under Neck Angle θ	Actual Effective Length Depends on Work Inclination Angle				Figure
Flute Diameter D	Length Under Neck ℓ1	Shank Diameter d	Shank Diameter d	Standard	Sharp Edge	Blade Length ℓ	Under Neck Diameter d1	Overall Length L	Under Neck Angle θ	30'	1°	2°	3°	Figure
0.1	0.3	-	4	No Standards	●	0.2	0.085	50	10°	0.31	0.33	0.37	0.41	1
	0.5			No Standards	●					0.52	0.55	0.61	0.69
	1			No Standards	●					1.05	1.1	1.22	1.37
0.2	0.5	-	4	No Standards	●	0.3	0.18	50	10°	0.52	0.55	0.61	0.69	1
	1			●	●					1.05	1.1	1.22	1.37
	1.5			●	●					1.57	1.65	1.83	2.06
	2			No Standards	●					2.09	2.2	2.44	2.75
	2.5			No Standards	●					2.62	2.75	3.05	3.43
	3			No Standards	●					3.14	3.3	3.66	4.12
	3.5			No Standards	●					3.66	3.85	4.27	4.81
	4			No Standards	●					4.19	4.4	4.88	5.49
0.3	1	-	4	●	●	0.45	0.28	50	10°	1.05	1.1	1.22	1.37	1
	1.5			No Standards	●					1.57	1.65	1.83	2.06
	2			●	●					2.09	2.2	2.44	2.75
	2.5			No Standards	●					2.62	2.75	3.05	3.43
	3			●	●					3.14	3.3	3.66	4.12
	4			●	●					4.19	4.4	4.88	5.49
	5			●	●					5.24	5.49	6.1	6.87
	6			No Standards	●					6.28	6.59	7.32	8.24
	9			No Standards	●					9.42	9.89	10.98	12.36
0.4	1	-	4	No Standards	●	0.6	0.37	50	10°	1.05	1.1	1.22	1.37	1
	2	-	4	●	●				10°	2.09	2.2	2.44	2.75
	2	6	6	No Standards	●				15°	2.06	2.13	2.28	2.45
	3	-	4	●	●				10°	3.14	3.3	3.66	4.12
	4			●	●					4.19	4.4	4.88	5.49
	5			●	●					5.24	5.49	6.1	6.87
	6			●	●					6.28	6.59	7.32	8.24
	7			No Standards	●					7.33	7.69	8.54	9.61
	8			No Standards	●					8.38	8.79	9.76	10.98
	9			No Standards	●					9.42	9.89	10.98	12.36
	10			No Standards	●					10.47	10.99	12.21	13.73
	12			No Standards	●					12.57	13.19	14.65	16.48

[ ! ]For shank diameter (d) specifications listed in blue, specify a blade diameter (D), shank length (ℓ1) and shank diameter (d).

Model Number
XAL-PEM2LB (Sharp Edge) / XAL-EM2LB (Standard)

Flute Diameter D	Length Under Neck ℓ1	Shank Diameter d	Shank Diameter d	Standard	Sharp Edge	Blade Length ℓ	Under Neck Diameter d1	Overall Length L	Under Neck Angle θ	Actual Effective Length Depends on Work Inclination Angle				Figure
Flute Diameter D	Length Under Neck ℓ1	Shank Diameter d	Shank Diameter d	Standard	Sharp Edge	Blade Length ℓ	Under Neck Diameter d1	Overall Length L	Under Neck Angle θ	30'	1°	2°	3°	Figure
0.5	1	-	4	No Standards	●	0.7	0.46	50	10°	1.05	1.1	1.22	1.37	1
	2			●	●					2.09	2.2	2.44	2.75
	3			No Standards	●					3.14	3.3	3.66	4.12
	4			●	●					4.19	4.4	4.88	5.49
	4	6	6	●	●				15°	4.13	4.26	4.56	4.91
	5	-	4	No Standards	●				10°	5.24	5.49	6.1	6.87
	6			●	●					6.28	6.59	7.32	8.24
	7			No Standards	●					7.33	7.69	8.54	9.61
	8			●	●					8.38	8.79	9.76	10.98
	9			No Standards	●					9.42	9.89	10.98	12.36
	10			●	●					10.47	10.99	12.21	13.73
	12			●	●					12.57	13.19	14.65	16.48
	15			●	●					15.71	16.48	18.31	20.6
0.6	2	-	4	●	●	0.9	0.56	50	10°	2.09	2.2	2.44	2.75	1
	3			No Standards	●					3.14	3.3	3.66	4.12
	4			●	●					4.19	4.4	4.88	5.49
	4	6	6	No Standards	●				15°	4.13	4.26	4.56	4.91
	6	-	4	●	●				10°	6.28	6.59	7.32	8.24
	7			No Standards	●					7.33	7.69	8.54	9.61
	8			●	●					8.38	8.79	9.76	10.98
	10			●	●					10.47	10.99	12.21	13.73
	12			●	●					12.57	13.19	14.65	16.48
	15			●	●					15.71	16.48	18.31	20.6
	18			No Standards	●			70		18.85	19.78	21.97	24.71
0.7	2	-	4	●	●	1.05	0.66	50	10°	2.09	2.2	2.44	2.75	1
	4			●	●					4.19	4.4	4.88	5.49
	6			●	●					6.28	6.59	7.32	8.24
	8			●	●					8.38	8.79	9.76	10.98
	10			No Standards	●					10.47	10.99	12.21	13.73
0.8	4	-	4	●	●	1.2	0.76	50	10°	4.19	4.4	4.88	5.49	1
	6			●	●					6.28	6.59	7.32	8.24
	8			●	●					8.38	8.79	9.76	10.98
	10			●	●					10.47	10.99	12.21	13.73
	12			●	●					12.57	13.19	14.65	16.48
	14			No Standards	●					14.66	15.39	17.09	19.22
	16			No Standards	●					16.75	17.58	19.53	21.97
	20			No Standards	●			70		20.94	21.98	24.41	27.46
	24			No Standards	●			70		25.13	26.38	29.29	Without Interference
0.9	4	-	4	No Standards	●	1.35	0.85	50	10°	4.19	4.4	4.88	5.49	1
	6			●	●					6.28	6.59	7.32	8.24
	8			●	●					8.38	8.79	9.76	10.98
	10			No Standards	●					10.47	10.99	12.21	13.73
	15			No Standards	●					15.71	16.48	18.31	20.6
1	3	-	4	No Standards	●	1.5	0.95	50	10°	3.14	3.3	3.66	4.12	1
	4			●	●					4.19	4.4	4.88	5.49
	5			No Standards	●					5.24	5.49	6.1	6.87
	6			●	●					6.28	6.59	7.32	8.24
	6	6	6	●	●				15°	6.19	6.39	6.84	7.36
	7	-	4	No Standards	●				10°	7.33	7.69	8.54	9.61
	8			●	●					8.38	8.79	9.76	10.98
	9			No Standards	●					9.42	9.89	10.98	12.36
	10			●	●					10.47	10.99	12.21	13.73
	12			●	●					12.57	13.19	14.65	16.48
	14			●	●					14.66	15.39	17.09	19.22
	16			●	●					16.75	17.58	19.53	21.97
	18			No Standards	●			70		18.85	19.78	21.97	24.71
	20			●	●					20.94	21.98	24.41	27.46
	22			No Standards	●					23.04	24.18	26.85	Without Interference
	25			●	●					26.18	27.47	30.51	Without Interference
	30			●	●					31.41	32.97	36.62	Without Interference

[ ! ]For shank diameter (d) specifications listed in blue, specify a blade diameter (D), shank length (ℓ1) and shank diameter (d).

Model Number
XAL-PEM2LB (Sharp Edge) / XAL-EM2LB (Standard)

Flute Diameter D	Length Under Neck ℓ1	Shank Diameter d	Shank Diameter d	Standard	Sharp Edge	Blade Length ℓ	Under Neck Diameter d1	Overall Length L	Under Neck Angle θ	Actual Effective Length Depends on Work Inclination Angle				Figure
Flute Diameter D	Length Under Neck ℓ1	Shank Diameter d	Shank Diameter d	Standard	Sharp Edge	Blade Length ℓ	Under Neck Diameter d1	Overall Length L	Under Neck Angle θ	30'	1°	2°	3°	Figure
1.2	6	-	4	●	●	1.8	1.15	50	10°	6.28	6.59	7.32	8.24	1
	8			●	●					8.38	8.79	9.76	10.98
	10			●	●					10.47	10.99	12.21	13.73
	12			●	●					12.57	13.19	14.65	16.48
	16			●	●					16.75	17.58	19.53	21.97
1.4	6	-	4	No Standards	●	2.1	1.35	50	10°	6.28	6.59	7.32	8.24	1
	8			No Standards	●					8.38	8.79	9.76	10.98
	10			No Standards	●					10.47	10.99	12.21	13.73
	12			No Standards	●					12.57	13.19	14.65	16.48
	14			No Standards	●					14.66	15.39	17.09	19.22
	16			No Standards	●					16.75	17.58	19.53	21.97
1.5	4	-	4	No Standards	●	2.3	1.45	50	10°	4.19	4.4	4.88	5.49	1
	6			●	●					6.28	6.59	7.32	8.24
	8			●	●					8.38	8.79	9.76	10.98
	10			●	●					10.47	10.99	12.21	13.73
	12			●	●					12.57	13.19	14.65	16.48
	14			●	●					14.66	15.39	17.09	19.22
	16			●	●					16.75	17.58	19.53	21.97
	18			●	●			70		18.85	19.78	21.97	24.71
	20			●	●					20.94	21.98	24.41	Without Interference
	25			No Standards	●					26.18	27.47	30.51	Without Interference
	30			No Standards	●					31.41	32.97	Without Interference	Without Interference
	35			No Standards	●			100		36.65	38.46	Without Interference	Without Interference
	40			No Standards	●					41.88	43.96	Without Interference	Without Interference
	45			No Standards	●					47.12	49.45	Without Interference	Without Interference
1.6	6	-	4	No Standards	●	2.4	1.55	50	10°	6.28	6.59	7.32	8.24	1
	8			No Standards	●					8.38	8.79	9.76	10.98
	10			No Standards	●					10.47	10.99	12.21	13.73
	12			No Standards	●					12.57	13.19	14.65	16.48
	14			No Standards	●					14.66	15.39	17.09	19.22
	16			No Standards	●					16.75	17.58	19.53	21.97
	18			No Standards	●			70		18.85	19.78	21.97	Without Interference
	20			No Standards	●					20.94	21.98	24.41	Without Interference
	26			No Standards	●					27.22	28.57	31.73	Without Interference
1.8	6	-	4	No Standards	●	2.7	1.75	50	10°	6.28	6.59	7.32	8.24	1
	8			No Standards	●					8.38	8.79	9.76	10.98
	10			No Standards	●					10.47	10.99	12.21	13.73
	12			No Standards	●					12.57	13.19	14.65	16.48
	14			No Standards	●					14.66	15.39	17.09	19.22
	16			No Standards	●					16.75	17.58	19.53	Without Interference
	18			No Standards	●			70		18.85	19.78	21.97	Without Interference
	20			No Standards	●					20.94	21.98	24.41	Without Interference
	25			No Standards	●					26.18	27.47	30.51	Without Interference
2	6	-	4	●	●	3	1.95	50	10°	6.28	6.59	7.32	8.24	1
	8			●	●					8.38	8.79	9.76	10.98
	10			●	●					10.47	10.99	12.21	13.73
	10	6	6	●	●				15°	10.31	10.65	11.4	12.27
	12	-	4	●	●				10°	12.57	13.19	14.65	16.48
	14			●	●					14.66	15.39	17.09	19.22
	16			●	●					16.75	17.58	19.53	Without Interference
	18			●	●			70		18.85	19.78	21.97	Without Interference
	20			●	●					20.94	21.98	24.41	Without Interference
	25			●	●					26.18	27.47	Without Interference	Without Interference
	30			●	●					31.41	32.97	Without Interference	Without Interference
	35			No Standards	●			100		36.65	38.46	Without Interference	Without Interference
	40			No Standards	●					41.88	43.96	Without Interference	Without Interference
	50			No Standards	●					52.35	54.95	Without Interference	Without Interference
	60			No Standards	●					62.83	Without Interference	Without Interference	Without Interference

[ ! ]For shank diameter (d) specifications listed in blue, specify a blade diameter (D), shank length (ℓ1) and shank diameter (d).

Model Number
XAL-PEM2LB (Sharp Edge) / XAL-EM2LB (Standard)

Flute Diameter D	Length Under Neck ℓ1	Shank Diameter d	Shank Diameter d	Standard	Sharp Edge	Blade Length ℓ	Under Neck Diameter d1	Overall Length L	Under Neck Angle θ	Actual Effective Length Depends on Work Inclination Angle				Figure
Flute Diameter D	Length Under Neck ℓ1	Shank Diameter d	Shank Diameter d	Standard	Sharp Edge	Blade Length ℓ	Under Neck Diameter d1	Overall Length L	Under Neck Angle θ	30'	1°	2°	3°	Figure
2.5	8	-	4	●	●	3.8	2.4	50	10°	8.38	8.79	9.76	10.98	1
	10			No Standards	●					10.47	10.99	12.21	13.73
	12			●	●					12.57	13.19	14.65	Without Interference
	14			No Standards	●					14.66	15.39	17.09	Without Interference
	16			●	●					16.75	17.58	19.53	Without Interference
	18			No Standards	●			70		18.85	19.78	Without Interference	Without Interference
	20			●	●					20.94	21.98	Without Interference	Without Interference
	25			●	●					26.18	27.47	Without Interference	Without Interference
	30			●	●					31.41	32.97	Without Interference	Without Interference
	40			No Standards	●			100		41.88	Without Interference	Without Interference	Without Interference
	50			No Standards	●			100		52.35	Without Interference	Without Interference	Without Interference
3	8	-	6	●	●	4.5	2.9	50	10°	8.38	8.79	9.76	10.98	1
	10			No Standards	●					10.47	10.99	12.21	13.73
	12			●	●					12.57	13.19	14.65	16.48
	14			No Standards	●			70		14.66	15.39	17.09	19.22
	16			●	●					16.75	17.58	19.53	21.97
	18			No Standards	●					18.85	19.78	21.97	24.71
	20			●	●					20.94	21.98	24.41	27.46
	25			●	●					26.18	27.47	30.51	Without Interference
	30			●	●					31.41	32.97	36.62	Without Interference
	40			●	●			100		41.88	43.96	Without Interference	Without Interference
	45			No Standards	●					47.12	49.45	Without Interference	Without Interference
	50			No Standards	●					52.35	54.95	Without Interference	Without Interference
4	12	-	6	●	●	6	3.8	50	10°	12.57	13.19	14.65	16.48	1
	16			●	●			50		16.75	17.58	19.53	Without Interference
	20			●	●			70		20.94	21.98	24.41	Without Interference
	25			No Standards	●					26.18	27.47	Without Interference	Without Interference
	30			●	●					31.41	32.97	Without Interference	Without Interference
	35			No Standards	●			100		36.65	38.46	Without Interference	Without Interference
	40			●	●					41.88	43.96	Without Interference	Without Interference
	45			No Standards	●					47.12	49.45	Without Interference	Without Interference
	50			No Standards	●					52.35	54.95	Without Interference	Without Interference
5	16	-	6	●	●	7.5	4.8	70	10°	16.75	17.58	Without Interference	Without Interference	1
	20			No Standards	●					20.94	21.98	Without Interference	Without Interference
	25			●	●					26.18	27.47	Without Interference	Without Interference
	30			No Standards	●					31.41	Without Interference	Without Interference	Without Interference
	35			●	●			100		36.65	Without Interference	Without Interference	Without Interference
	40			No Standards	●					41.88	Without Interference	Without Interference	Without Interference
	50			●	●					52.35	Without Interference	Without Interference	Without Interference
6	20	-	6	●	●	9	5.8	70	-	Without Interference	Without Interference	Without Interference	Without Interference	2
	30			●	●			70		Without Interference	Without Interference	Without Interference	Without Interference
	40			●	●			100		Without Interference	Without Interference	Without Interference	Without Interference
	50			●	●					Without Interference	Without Interference	Without Interference	Without Interference
	60			●	●					Without Interference	Without Interference	Without Interference	Without Interference

[ ! ]>For shank diameter (d) specifications listed in blue, specify a blade diameter (D), shank length (ℓ1) and shank diameter (d).

More Information

● The ideal length under neck can be selected for workpiece machining in deep areas.
● The XAL coating with excellent lubricity delivers stable wear-resistant performance, especially when milling mild steel, giving improved shape accuracy to the machined objects.
[ ! ]The XAL coating does not have conductive properties. It cannot be used with conduction model tool setters.

XAL Coated Carbide Long Neck Square End Mill, 2-Flute / Long Neck Model:Related Image

[ ! ]The actual effective length is a guideline. Confirm the actual measurement if concerned about interference with the workpiece.

Product TOP

Basic InformationThông tin cơ bản

Work Material	General Steel / Heat-Treated Steel / Stainless Steel / Cast Iron / Aluminum Alloy / Copper Alloy / Resin	Number of Flutes(sheet)	2	Model	Long Neck Square
Coating	For General Steel (AlCrN etc.)	Processing Applications	Flat Surface / Side Surface / Groove / Inclined Cutting	Torsion Angle (θ)	Standard Helix (30 to 40°)
Additional Classification	Stocked Product	Tolerance of OD(mm)	0 ~ -0.02	● Inventory Product □ Manufacturer Product	●

The specifications and dimensions of some parts may not be fully covered. For exact details, refer toCác thông số kỹ thuật và kích thước của mã sản phẩm có thể không được bao phủ đầy đủ. Để biết chi tiết chính xác, hãy tham khảo manufacturer catalogsdanh mục nhà sản xuất ..

Top of the page

About MISUMIVề Misumi

About this WebsiteVề trang Web này

Useful ToolsCác công cụ hữu ích

Customer ServiceDịch vụ chăm sóc khách hàng

MISUMI Contact Monday to Saturday: 8:00 am - 5:00 pm Order cut off time is 5:00 pm Thứ 2 đến Thứ 7: 8 giờ sáng đến 5 giờ chiều Hạn chót đặt hàng là 5 giờ chiều

Tel:Số điện thoại:0222-361-1555
Fax:Số Fax:0222-361-2555
InquiryYêu cầu

MISUMI APP

Install MISUMI APP

TALK

TALK ID : Misumi_vn

MISUMI Vietnam Company Limited, Legal Representative: Tomohiro Watanabe,
phone: 0222-361-1555, e-mail: cs@misumi.com.vn, Enterprise Code: 0107514576,
Date of Issuance: 22 July 2016, Place of Issuance: Bac Ninh, Business Certificate No. 6573041568-KD dated 27 September 2016 issued by the People's Committee of Bac Ninh

Công ty TNHH MISUMI Việt Nam, Đại diện theo pháp luật: Tomohiro Watanabe,
Điện thoại: 0222-361-1555, e-mail: cs@misumi.com.vn, Mã số doanh nghiệp: 0107514576,
ngày cấp 22/7/2016, nơi cấp: Bắc Ninh, Giấy phép kinh doanh số: 6573041568-KD ngày cấp 27/9/2016 bởi UBND tỉnh Bắc Ninh

ものづくりの、明日を支える。MISUMI-VONA 生産材コマース ものづくりの、明日を支える。MISUMI-VONA 生産材コマース

Search by Category / Brand Tìm theo danh mục, nhãn hiệu

Search by Category Tìm theo danh mục

How can we improve?

ConfigureTạo

Specification/DimensionsĐặc điểm kỹ thuật / Kích thướcĐặc điểm kỹ thuật / Kích thước

Outer Diameter (D)(φ)

Flute Length (ℓ)(mm)

Shank Diameter (d)(mm)

Overall Length (L)(mm)

Length Under Neck (ℓ1)(mm)

Geometry

type

Days to ShipSố ngày giao hàng

Specify AlterationsChỉ định thay đổi

(Economy series) XAL Coated Carbide Long Neck Square End Mill, 2-Flute / Long Neck Model (Part Number)

Copy Part Number URL to Clipboard

Product Description

Specifications

More Information

Basic InformationThông tin cơ bản

About MISUMIVề Misumi

About this WebsiteVề trang Web này

Useful ToolsCác công cụ hữu ích

Customer ServiceDịch vụ chăm sóc khách hàng

MISUMI Contact Monday to Saturday: 8:00 am - 5:00 pm Order cut off time is 5:00 pm Thứ 2 đến Thứ 7: 8 giờ sáng đến 5 giờ chiều Hạn chót đặt hàng là 5 giờ chiều

ものづくりの、明日を支える。MISUMI-VONA 生産材コマースものづくりの、明日を支える。MISUMI-VONA 生産材コマース