Product Detail
Similar Products
Product Detail Connector assembly is performed in the following order.
(1) Pass the cable through the cord bushing and connector body, and then solder to the insulator unit contact.
(2) After soldering the wire to the connector, crimp the clamp brackets attached to the connector with the crimp tool (HR10A-TC-02) or pliers.
(3) Fit the insulator unit screw part into the connector body. (Use a wrench and tighten to the values shown in the table.) When tightening the connector body, loosen the D part first so that the solder connection part is not placed under stress.
(4) Tighten the fastening screw so that its tip touches one of the two bosses on the clamp bracket. Note that the fastening screw is fixed with tightening torque of 0.3 N⋅m (3 kgf⋅cm).
(5) Finally, cover the the cord bushing with the connector body.
(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.
Tel: 0222-361-1555
Email: cs@misumi.com.vn
8:00 - 17:00 (Mon - Sat)
Search by Category / Brand Tìm theo danh mục, nhãn hiệu
Search by Category Tìm theo danh mục
- [Thông báo] Cập nhật địa chỉ kho tập kết hàng hóa tại khu vực miền Nam của MISUMI Việt Nam. Xem chi tiết.
[Announcement] Update on warehouse address in the Southern region of MISUIMI Vietnam. See more. - [Cảnh Báo] Thủ Đoạn Lừa Đảo Từ Nhân Viên Giao Hàng – Yêu Cầu Trả Phí Ship. Xem chi tiết.
[Warning] Fraud Calling from Shipper - Asking to Pay Shipping Fee. See more.
Specification/DimensionsĐặc điểm kỹ thuật / Kích thướcĐặc điểm kỹ thuật / Kích thước
-
CN1
- Male relay straight
- Female relay straight
-
Number Of Cores
- 4
- 6
- 10
- 12
-
Bend tolerant
- N/A
-
Specified Length(m)
-
CN2
- Male straight
- Male relay straight
- Female straight
- Female relay straight
- Cut off
- Y terminal
- Mark tube only
Specify AlterationsChỉ định thay đổi
HR10A Connector Relay Harness
- For Signal
- Connection between Devices
- Sensor
- EMI Countermeasure
- Solder
- One-Touch Lock
- Silver-Plated
- MISUMI Original
You can add up to 6 items per a category to the compare list.
Brand :
Part Number :
Copy Part Number URL to Clipboard
The part number URL has been copied into your clipboard.
-
- Order Qty :
-
-
- Price :
- ---
-
- Total Price :
- ---
-
- Days to ship :
- ---
Select part number to Order Now/ Add to Cart
● Available as a relay of HR10A connector. It has excellent anti-noise performance if combined with a double-shielded cable.
● Shield is connected in the shell of the connector.
Wiring and Wire Color Page
>>Click here
Component Page
>>Click here
Product Description
A harness with a wire-to-wire connector using Hirose Electric HR10 connector. The single-action, waterproof design improves wiring work efficiency in various environments
Specifications
| Specified Length (m) | 0.9 | 1 ~ 4 | 4.1 ~ 50 |
| Tolerance | +20mm | +50mm | + 3% of Specified Length |
| Connector Type | Shape Specification Type | Outline Image Drawing (Unit: mm) | Cable Type | Number of Cores | Specified Length (m) |
| JP (Male for Relay) |  |   | 4 | 0.2 ~ 50 Can be specified by 0.1 m increments | |
| 6 | |||||
| 10 | |||||
| 12 | |||||
| JS (Female for Relay) |  | 4 | |||
| 6 | |||||
| 10 | |||||
| 12 | |||||
| JPP (Male for Relay / Male Plug) |  | 4 | |||
| 6 | |||||
| 10 | |||||
| 12 | |||||
| JSS (Female for Relay / Female Plug) |  | 4 | |||
| 6 | |||||
| 10 | |||||
| 12 | |||||
| JPS (Male for Relay / Female Plug) |  | 4 | |||
| 6 | |||||
| 10 | |||||
| HR10AJ Hirose Electric Co., Ltd | 12 | ||||
| JSP (Female For Relay / Male Plug) |  | 4 | |||
| 6 | |||||
| 10 | |||||
| 12 | |||||
| JPJP (Male for Relay / Male for Relay) |  | 4 | |||
| 6 | |||||
| 10 | |||||
| 12 | |||||
| JSJS (Female for Relay / Female for Relay) |  | 4 | |||
| 6 | |||||
| 10 | |||||
| 12 | |||||
| JPJS (Male for Relay / Female for Relay) |  | 4 | |||
| 6 | |||||
| 10 | |||||
| 12 | |||||
| Connector >>Click here | JPY (Male for Relay / Y Terminal) With Pin No. Insertion Mark Tube |  | 4 | ||
| 6 | |||||
| 10 | |||||
| 12 |
| Connector Type | Shape Specification Type | Outline Image Drawing (Unit: mm) | Cable Type | Number of Cores | Specified Length (m) |
| HR10AJ Hirose Electric Co., Ltd | JSY (Female for Relay / Y Terminal) with Pin No. Insertion Mark Tube |  |   | 4 | 0.2 ~ 50 Can be specified by 0.1 m increments |
| 6 | |||||
| 10 | |||||
| 12 | |||||
| JPT (Male for Relay / Loose Wires) with Pin No. Insertion Mark Tube |  | 4 | |||
| 6 | |||||
| 10 | |||||
| 12 | |||||
| Connector >>Click here | JST (Female for Relay / Loose Wires) with Pin No. Insertion Mark Tube |  | 4 | ||
| 6 | |||||
| 10 | |||||
| 12 |
More Information
Electrical Properties
| Number of Cores | Connector | A Cable | ||||
| Rated Current (A or less) | Rated Voltage (V or less) | Section Area | Rated Voltage | Allowable Current A (30°C) | ||
| AC | DC | |||||
| 4 | 2 | 100 | 140 | AWG28 (0.08mm2) | 30V | 2.3 |
| 6 | 100 | 140 | ||||
| 10 | 1.8 | |||||
| 12 | ||||||
| Part Number |
|---|
| HR10AJ-JPJP-SB-4-[0.2-50/0.1] |
| HR10AJ-JPJP-SB-6-[0.2-50/0.1] |
| HR10AJ-JPJP-SB-10-[0.2-50/0.1] |
| HR10AJ-JPJP-SB-12-[0.2-50/0.1] |
| Part Number | Price | Minimum Order Qty. | Volume Discount | Days to ShipSố ngày giao hàng | CN1 | CN2 | Number Of Cores | Bend tolerant | Specified Length (m) |
|---|---|---|---|---|---|---|---|---|---|
- | 1 Piece(s) | 6 Day(s) or more | Male relay straight | Male relay straight | 4 | N/A | 0.2 ～ 50 | ||
- | 1 Piece(s) | 6 Day(s) or more | Male relay straight | Male relay straight | [6] 6 | N/A | 0.2 ～ 50 | ||
- | 1 Piece(s) | 6 Day(s) or more | Male relay straight | Male relay straight | 10 | N/A | 0.2 ～ 50 | ||
- | 1 Piece(s) | 6 Day(s) or more | Male relay straight | Male relay straight | 12 | N/A | 0.2 ～ 50 |
Loading...Tải…
Characteristics
| Item | Contents |
|---|---|
| Rated Current | 2 A or lower |
| Rated Voltage | 14-core: 150 VAC / 200 VDC, Other: 100 VAC / 140 VDC |
| Withstand Voltage | 300 VAC or less (500 VAC or less for 4-core) / 1 minute |
| Insulation Resistance | 1,000 MΩ or more / 100 VDC |
| Contact Resistance | 10 mΩ or less / 1 ADC |
| Compatible Wire Size | AWG26 or below Loose Wires or 0.15 mm2 or less Loose Wires |
* For applicable wire size, cable finished outer diameter should be within cable clamp inner diameter.
Material / Finish
| Item | Materials | Finish |
|---|---|---|
| Body Shell | Zinc Alloy | Satin Nickel Plated |
| Pin Contact | Brass | Silver Plating |
| Socket Contact | Phosphor Bronze | Silver Plating |
| Insulator | Polyamide Resin | Black |
Contact Arrangement Diagram
Connection Work Method (Relay type can be done by the same method.)
| Number of Cores | Wrench Spacing (mm) | D Dimension (mm) | Wrench Tightening Force |
|---|---|---|---|
| 4.6 | 7.5 | 10 | 1.5 N・m (15 kgf・cm) |
| 10.12 | 9.5 | 16 | 1.5 N・m (15 kgf・cm) |
Connector Insertion and Removal Method
Basic InformationThông tin cơ bản
| Connector type | HR10 | Connector manufacturer | Hirose Electric Group | Cable rated voltage(V) | 30 |
|---|---|---|---|---|---|
| Cable shape | Circular | Shield | 2 Layer | Cable standard (UL/CSA) | UL |
| Cable color | Black | Twisted pair | Included | Conductor dimensions(AWG) | 28 |
| Cable type | SB |
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer toCác thông số kỹ thuật và kích thước của mã sản phẩm có thể không được bao phủ đầy đủ. Để biết chi tiết chính xác, hãy tham khảo manufacturer catalogsdanh mục nhà sản xuất ..
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy