(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.
Select part number to Order Now/ Add to Cart
Type | Material | Surface Treatment | |||
Not Flanged | Flanged | Body | Flange | Bearing | |
E-LAFBD | E-LAFDF | Aluminum Alloy | Aluminum Alloy | Steel | Clear Anodized |
E-LBFBD | E-LBFDF | Equivalent to S45C | SPCC | Ferroferric Oxide Protective Film | |
E-LMFBD | E-LMFDF | Electroless Nickel Plating |
Part Number | D | F | A | Applicable Belt Nominal Width | S | Bearing size | Retaining Ring | |||||
Type | W | inch | mm | Specifications | d | B | E-LAFBD E-LMFBD E-LAFDF E-LMFDF | E-LBFBD E-LBFDF | ||||
Not Flanged E-LAFBD E-LBFBD E-LMFBD Flanged E-LAFDF E-LBFDF E-LMFDF | 9 | 20 | 25 | 5 | - | 4 | 2.5 | 695ZZ | 5 | 4 | RTWS13 | RTWN13 |
25 | 30 | |||||||||||
10 | 25 | 30 | 6 | 0.19 | - | 2.5 | 696ZZ | 6 | 5 | RTWS15 | RTWN15 | |
11 | 25 | 30 | 7 | - | 6 | 3 | 696ZZ | 6 | 5 | RTWS15 | RTWN15 | |
11.5 | 25 | 30 | 7.5 | 0.25 | - | 3.25 | 696ZZ | 6 | 5 | RTWS15 | RTWN15 | |
14 | 30 | 35 | 9 | 0.31 | 4 | 698ZZ | 8 | 6 | RTWS19 | RTWN19 | ||
15 | 30 | 35 | 11 | 0.37 | 10 | 4.5 | 698ZZ | 8 | 6 | RTWS19 | RTWN19 | |
16 | 40 | 48 | 4 | 6000ZZ | 10 | 8 | RTWS26 | RTWN26 | ||||
19 | 30 | 36 | 14 | 0.50 | - | 6.5 | 698ZZ | 8 | 6 | RTWS19 | RTWN19 | |
35 | 45 | 5.5 | 628ZZ | 8 | 8 | RTWS24 | RTWN24 | |||||
45 | 55 | 5 | 6200ZZ | 10 | 9 | RTWS30 | RTWN30 | |||||
22 | 35 | 45 | 17 | - | 15 | 7 | 6000ZZ | 10 | 8 | RTWS26 | RTWN26 | |
45 | 55 | 6.5 | 6200ZZ | 10 | 9 | RTWS30 | RTWN30 | |||||
26 | 40 | 48 | 21 | 0.75 | - | 9 | 6000ZZ | 10 | 8 | RTWS26 | RTWN26 | |
45 | 55 | 8.5 | 6200ZZ | 10 | 9 | RTWS30 | RTWN30 | |||||
50 | 58 | 8.5 | 10 |
Part Number | Nominal Model | D | F | A | Applicable Belt Nominal Width | Bearing size | ||||
Type | W | inch | mm | Specifications | d | B | ||||
Not Flanged E-LAFBD Flanged E-LAFDF | 9 | 15 | 15 | 18 | 5 | - | 4 | 675ZZ×2 | 5 | 2.5 |
20W | 20 | 25 | 676ZZ×2 | 6 | 3 | |||||
11 | 15 | 15 | 18 | 7 | 6 | 675ZZ×2 | 5 | 2.5 | ||
20 | 20 | 25 | 676ZZ×2 | 6 | 3 | |||||
11.5 | 15 | 15 | 18 | 7.5 | 0.25 | - | 675ZZ×2 | 5 | 2.5 | |
20 | 20 | 25 | 676ZZ×2 | 6 | 3 | |||||
15 | 20 | 20 | 25 | 11 | 0.37 | 10 | 686ZZ×2 | 6 | 5 | |
25 | 25 | 30 | 688ZZ×2 | 8 | 5 | |||||
19 | 25 | 25 | 32 | 14 | 0.50 | - | 688ZZ×2 | 8 | 5 | |
30W | 30 | 36 | 688ZZ×2 | 8 | 5 | |||||
22 | 25 | 25 | 32 | 17 | - | 15 | 688ZZ×2 | 8 | 5 | |
35W | 35 | 45 | 6000ZZ×2 | 10 | 8 | |||||
26 | 40W | 40 | 48 | 21 | 0.75 | - | 6000ZZ×2 | 10 | 8 | |
45W | 45 | 55 | 6201ZZ×2 | 12 | 10 | |||||
27 | 60 | 60 | 67 | 22 | - | 20 | 6201ZZ×2 | 12 | 10 | |
32 | 45 | 45 | 55 | 27 | 1.00 | 25 | ||||
65 | 65 | 74 | 27 | |||||||
37 | 55 | 55 | 67 | 32 | - | 30 | ||||
65 | 65 | 74 | 32 | |||||||
45 | 70 | 70 | 80 | 40 | 1.50 | - | 6202ZZ×2 | 15 | 11 | |
49 | 60 | 60 | 67 | 44 | - | 40 | ||||
70 | 70 | 80 | 44 | |||||||
58 | 60 | 60 | 67 | 53 | 50 | |||||
59 | 70 | 70 | 80 | 54 | 2.00 | - |
Usage Method Example Drawing | Usage Method of Timing Belt Backside Tensioning Idlers |
When the backside tensioning idler is used on the outside, the selected pulley diameter should be more than 20% larger than the minimum pulley diameter in the product catalog. ① When the backside tensioning ilder is used on the outside, it should be set close to the large pulley. ② The bending angle of the machine belt should be greater than 140#. ③ The flat pulley without bulge should be used for the tensioning idler. ④ Do not use the backside tensioning idler for the polyurethane belt. |
Food | Semiconductor | Smart Phones | ||
Medical | Electronic & Electrical | Lithium battery | ||
Part Number |
---|
E-LMFDF19-30 |
Part Number | Price | Minimum Order Qty. | Volume Discount | Days to ShipSố ngày giao hàng | Belt Width Used (mm) (mm) | Material | Surface Treatment | Shaft Bore Dia. d (mm) | Bearing Position | Groove Width W (mm) | With or w/o Flange | Outer Dia. D (mm) | Operating Belt Width (inch) |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
102,829 VND | 4 Piece(s) | Available | 10 Day(s) | 19 | [Steel] S45C Equivalent | Electroless Nickel Plating | 8 | Central Bearing | 19 | With | 30 | 0.5 |
Loading...Tải…
Please check the type/dimensions/specifications of the part E-LMFDF19-30 in the Backside Tension Idler Pulleys series.Vui lòng kiểm tra kiểu/kích thước/thông số kỹ thuật của phần E-LMFDF19-30 trong chuỗi Backside Tension Idler Pulleys.
Part Number |
---|
E-LAFBD11-25 |
E-LAFBD11.5-15 |
E-LAFBD11.5-20 |
E-LMFDF19-35 |
E-LMFDF19-45 |
E-LMFDF22-35 |
Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to ShipSố ngày giao hàng | Belt Width Used (mm) (mm) | Material | Surface Treatment | Shaft Bore Dia. d (mm) | Bearing Position | Groove Width W (mm) | With or w/o Flange | Outer Dia. D (mm) | Operating Belt Width (inch) |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
76,609 VND | 4 Piece(s) | Available | 10 Day(s) | 11 | [Aluminum] Aluminum Alloy | Clear Anodize | 6 | Central Bearing | 11 | Without | 25 | - | |
83,140 VND | 4 Piece(s) | Available | 10 Day(s) | 11.5 | [Aluminum] Aluminum Alloy | Clear Anodize | 5 | Both Sides Bearing | 11.5 | Without | 15 | 0.25 | |
83,144 VND | 4 Piece(s) | Available | 10 Day(s) | 11.5 | [Aluminum] Aluminum Alloy | Clear Anodize | 6 | Both Sides Bearing | 11.5 | Without | 20 | 0.25 | |
103,042 VND | 4 Piece(s) | Available | 10 Day(s) | 19 | [Steel] S45C Equivalent | Electroless Nickel Plating | 8 | Central Bearing | 19 | With | 35 | 0.5 | |
109,542 VND | 4 Piece(s) | Available | 10 Day(s) | 19 | [Steel] S45C Equivalent | Electroless Nickel Plating | 10 | Central Bearing | 19 | With | 45 | 0.5 | |
102,872 VND | 4 Piece(s) | Available | 10 Day(s) | 22 | [Steel] S45C Equivalent | Electroless Nickel Plating | 10 | Central Bearing | 22 | With | 35 | - |
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy