・The Solenoid Valves is used to control the switching of air channel direction.
・ Single coil and double coil are available for your choice.
・Normally Open and Normally Closed are available for single coil.
・Two voltage options of DC24 V and AC220 V are available.
[Solenoid Valves Features]
・Excellent product quality and long service life.
・ The breathing method of the pilot head is changed from external circulation to internal circulation, and the breathing hole is removed, thus improving the dustproofing performance.
・ The pilot head is made of German special material, achieving excellent magnetization and demagnetization performance, rapid response without getting stuck.
・The spring is made of Japanese material, ensuring a long service life of 20 million cycles.
・ We provide generic specifications in the market for easy selection and replacement.
■ It has better quality than generic products in the market. ・The economy series products have passed the testing of 20 million cycles.
* Generic products in the market are similar products randomly purchased by our company from online or offline markets.
* The test data are obtained through testing by our company, which are for reference only.
・Common problems that may affect service life
1. Seal packing wear: The seal packing material and inner hole machining may affect the service life of seal packing.
2. Reset spring fracture: Due to the impact of spring performance, the spring cannot reach the service life of over 20 million cycles.
* Generic products in the market are similar products randomly purchased by our company from online or offline markets.
* The test data are obtained through testing by our company, which are for reference only
1. Precautions for installation Solenoid Valves:
・Before installation, blow off the dust, oil, debris and other particles in the pipe in order not to affect the valve action and damage the valve.
・During installation, make sure that the valve conforms to technical requirements regarding "voltage", "operating frequency", "operating voltage", "operating temperature range”, etc.
・Please pay attention to the direction of air flow during installation.
・Before use, please insert the pipe to the end and confirm that it cannot be pulled out.
・When connecting the pipe, please make sure that the wrapped seal tape does not exceed the end face of the joint thread, and the dust, iron fillings and other dirt in the pipe joint are removed to prevent impurities or foreign objects from entering the valve body.
・ When commissioning the whole machine, it is recommended to perform commissioning manually first, and then do it automatically after power-on.
・During installation, the vibration direction can be adjusted to a right angle to the action direction of the solenoid valve stem (axial) to avoid the influence of vibration on the solenoid valve stem.
・To prevent condensed water and oil from flowing into the coil of the solenoid valve, it is preferred to install the coil upward or laterally.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy