(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.

Tel. Tel: 0222-361-1555 Email: cs@misumi.com.vn 8:00 - 17:00 (Mon - Sat)

ものづくりの、明日を支える。MISUMI-VONA 生産材コマース ものづくりの、明日を支える。MISUMI-VONA 生産材コマース

Webcode Seach | Series
#CODE
Keyword suggestionsTừ khóa gợi ý
Part number suggestionsGợi ý mã sản phẩm
Discontinued Products

Search by Category / Brand Tìm theo danh mục, nhãn hiệu

Search by Category Tìm theo danh mục

  • Viewed
    Products     Sản phẩm
    đã xem     최근 본
    상품     查看产品 查看產品
  • My
    Components     Linh kiện
    của tôi     나의 부품 我的部件 我的部件
  • Cart
Recently Viewed Products
X
My Components
X
Cart item(s)
X
Loading...
  • MISUMI Việt Nam đồng hành cùng Kỹ sư tương lai trong cuộc thi SMAE Award 2024. Xem chi tiết.
    MISUMI Vietnam accompanies Future Engineers in the SMAE Award 2024 competition. See more.  

  • How can we improve?

    How can we improve?

    Comments
    Name (Optional)
    E-mail Address (Optional)
    Tel (Optional)

    While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
    Customer Privacy Policy

    Thank you for your cooperation.

    While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
    Please use the inquiry form.

    Customer Privacy Policy

ConfigureTạo

Clear AllQuet sạch tât cả

Part number has not been determine

(937 Part Numbers Available)
Configure Remaining SpecificationsĐịnh cấu hình các thông số còn lại

Part Number CompleteĐã hoàn thành

C-HTBN1376S8M-150
loading

Specification/DimensionsĐặc điểm kỹ thuật / Kích thướcĐặc điểm kỹ thuật / Kích thước

  • Core Wire Material

    • Glass Fiber
      • Glass Core Wire
      • Glass Fiber

    ClearTrống

  • Belt Width (mm)(mm)

    • 15
    • 25
    • 30
    • 40

    ClearTrống

  • Circumference Length(mm)

    • 376
    • 400
    • 408
    • 424
    • 432
    • 440
    • 464
    • 480
    • 496
    • 512
    • 520
    • 528
    • 560
    • 584
    • 592
    • 600
    • 608
    • 616
    • 632
    • 640
    • 656
    • 672
    • 680
    • 704
    • 712
    • 720
    • 728
    • 736
    • 744
    • 752
    • 760
    • 768
    • 776
    • 784
    • 792
    • 800
    • 816
    • 824
    • 832
    • 840
    • 848
    • 856
    • 880
    • 888
    • 896
    • 904
    • 912
    • 920
    • 928
    • 944
    • 952
    • 960
    • 976
    • 984
    • 992
    • 1000
    • 1008
    • 1016
    • 1024
    • 1032
    • 1040
    • 1048
    • 1056
    • 1072
    • 1080
    • 1088
    • 1096
    • 1104
    • 1112
    • 1120
    • 1128
    • 1136
    • 1144
    • 1152
    • 1160
    • 1168
    • 1184
    • 1192
    • 1200
    • 1216
    • 1224
    • 1240
    • 1248
    • 1256
    • 1264
    • 1280
    • 1296
    • 1304
    • 1312
    • 1320
    • 1344
    • 1352
    • 1360
    • 1376
    • 1384
    • 1392
    • 1400
    • 1424
    • 1440
    • 1480
    • 1504
    • 1512
    • 1520
    • 1544
    • 1552
    • 1560
    • 1568
    • 1592
    • 1600
    • 1624
    • 1640
    • 1648
    • 1672
    • 1680
    • 1688
    • 1696
    • 1728
    • 1760
    • 1776
    • 1792
    • 1800
    • 1816
    • 1824
    • 1832
    • 1880
    • 1896
    • 1904
    • 1912
    • 1920
    • 1952
    • 1960
    • 2000
    • 2032
    • 2040
    • 2048
    • 2056
    • 2080
    • 2104
    • 2120
    • 2136
    • 2160
    • 2200
    • 2240
    • 2272
    • 2296
    • 2304
    • 2400
    • 2496
    • 2560
    • 2600
    • 2624
    • 2800
    • 2848
    • 2872
    • 2880
    • 2944
    • 3000
    • 3048
    • 3200
    • 3280
    • 3400
    • 3440
    • 3600
    • 3680
    • 4000
    • 4200
    • 4400
    • 4416
    • 4496
    • 4720
    • 5080
    • 5280
    • 5496

    ClearTrống

  • Number of Teeth

    • 47
    • 50
    • 51
    • 53
    • 54
    • 55
    • 58
    • 60
    • 62
    • 64
    • 65
    • 66
    • 70
    • 73
    • 74
    • 75
    • 76
    • 77
    • 79
    • 80
    • 82
    • 84
    • 85
    • 88
    • 89
    • 90
    • 91
    • 92
    • 93
    • 94
    • 95
    • 96
    • 97
    • 98
    • 99
    • 100
    • 102
    • 103
    • 104
    • 105
    • 106
    • 107
    • 110
    • 111
    • 112
    • 113
    • 114
    • 115
    • 116
    • 118
    • 119
    • 120
    • 122
    • 123
    • 124
    • 125
    • 126
    • 127
    • 128
    • 129
    • 130
    • 131
    • 132
    • 134
    • 135
    • 136
    • 137
    • 138
    • 139
    • 140
    • 141
    • 142
    • 143
    • 144
    • 145
    • 146
    • 148
    • 149
    • 150
    • 152
    • 153
    • 155
    • 156
    • 157
    • 158
    • 160
    • 162
    • 163
    • 164
    • 165
    • 168
    • 169
    • 170
    • 172
    • 173
    • 174
    • 175
    • 178
    • 180
    • 185
    • 188
    • 189
    • 190
    • 193
    • 194
    • 195
    • 196
    • 199
    • 200
    • 203
    • 205
    • 206
    • 209
    • 210
    • 211
    • 212
    • 216
    • 220
    • 222
    • 224
    • 225
    • 227
    • 228
    • 229
    • 235
    • 236
    • 237
    • 238
    • 239
    • 240
    • 244
    • 245
    • 250
    • 254
    • 255
    • 256
    • 257
    • 260
    • 265
    • 267
    • 270
    • 275
    • 280
    • 284
    • 287
    • 288
    • 300
    • 312
    • 320
    • 325
    • 328
    • 350
    • 356
    • 359
    • 360
    • 368
    • 375
    • 381
    • 400
    • 410
    • 425
    • 430
    • 450
    • 460
    • 500
    • 525
    • 550
    • 552
    • 562
    • 590
    • 635
    • 660
    • 687

    ClearTrống

  • type

    • C-HTBN□□S8M

    ClearTrống

  • CADCAD

    • 2D
    • 3D

    ClearTrống

Days to ShipSố ngày giao hàng

    • Alltất cả các
    • Same day
    • 5 Day(s) or Less
    • 8 Day(s) or Less
    • 10 Day(s) or Less
    • 12 Day(s) or Less

    ClearTrống

Specify AlterationsChỉ định thay đổi

Timing Belts S8M (Part Number)

Timing Belts S8M
  • Volume Discount
Check FAQ of this product (7 items)
You can add up to 6 items per a category to the compare list.

Brand :

MISUMI

MiSUMi Economy

MISUMI

Part Number :
937 Part Numbers Available

C-HTBN1376S8M-150

C-HTBN1376S8M-250

C-HTBN1376S8M-300

C-HTBN1376S8M-400

C-HTBN1384S8M-150

C-HTBN1384S8M-250

C-HTBN1384S8M-300

C-HTBN1384S8M-400

C-HTBN1392S8M-150

C-HTBN1392S8M-250

C-HTBN1392S8M-300

C-HTBN1392S8M-400

C-HTBN1400S8M-150

C-HTBN1400S8M-250

C-HTBN1400S8M-300

C-HTBN1400S8M-400

C-HTBN1424S8M-150

C-HTBN1424S8M-250

C-HTBN1424S8M-300

C-HTBN1424S8M-400

C-HTBN1376S8M-150
C-HTBN1376S8M-150

Copy Part Number URL to Clipboard

The part number URL has been copied into your clipboard.

Close

loading
    • From :
      38,113VND/Unit
  • Order Qty :
  • Total Price :
    ---
  • Days to ship :
    ---

Select part number to Order Now/ Add to Cart

CAD Download
My Components
My Components
Similar ProductsSimilar Products
Product DetailProduct Detail

Product Description

Timing Belts S8M
It is a round tooth profile rubber timing belt. This belt always uses for high torque transmission in an automation machine
[Features]
• Belt Shape: Closed End
• Belt Tooth Type: S8M (round tooth profile)
• Tooth Pitch: 8 mm.
• Belt Width: 15, 25, 30 and 40 mm.
• Circumference Length Shortest/Longest: 400 mm. and 4400 mm.
• Belt Operating Temperature Range: －30 to 90℃.
• Material:
Tooth rubber: Chloroprene
Core wire: Glass Fiber
Backing cloth layer: Nylon canvas
[Applications]
Suitable for use with a timing pulley in a transmission system in an automation machine



Product Overview

Usually, timing pulleys and timing belt are widely used to design mechanisms for transmitting rotational power generated by motors.
Driving and transmission are realized through the engagement between the teeth of timing pulleys and timing belts.

Dimensional Drawing

Dimensional drawing of MISUMI economic type belt

■Material/Specification Table
 Material
① Rear rubberChloroprene
② Tooth rubber
③ Core wireGlass Fiber
④ Backing clothNylon canvas

Specifications Overview

TypesTooth pitchRaLrHhiPLDUnit weight g/m
(Width: 10mm)
S8M85.25.25.33.052.250.68652
Belt circumference length is core wire length.
C-HTBN belt operating temperature range: -30 to 90 ℃.
The model engraved on the back of the product is the manufacturer model.
MISUMI makes no commitment to this product brand.
For the transmission capacity and calculation and design method of economy series timing belt, please refer to the national standard (GB) design manual.

Specification Table

■ Specification Table
Economic type Toothed timing belt S2M S3M S5M S8M S14M type Ordering example

■C-HTBN
■Type S8M (Tooth pitch: 8mm)
Part NumberBelt
Nominal Width		Number of TeethBelt Circumference Length
(mm)
TypeBelt Number
C-HTBN288S8M150
(15mm)

250
(25mm)

300
(30mm)

400
(40mm)		36288
328S8M41328
352S8M44352
376S8M47376
384S8M48384
392S8M49392
400S8M50400
408S8M51408
416S8M52416
424S8M53424
432S8M54432
440S8M55440
448S8M56448
456S8M57456
464S8M58464
472S8M59472
480S8M60480
488S8M61488
496S8M62496
512S8M64512
520S8M65520
528S8M66528
536S8M67536
544S8M68544
552S8M69552
560S8M70560
576S8M72576
584S8M73584
592S8M74592
600S8M75600
608S8M76608
616S8M77616
624S8M78624
632S8M79632
640S8M80640
648S8M81648
656S8M82656
664S8M83664
672S8M84672
680S8M85680
688S8M86688
696S8M87696
704S8M88704
712S8M89712
720S8M90720
728S8M91728
736S8M92736
744S8M93744
752S8M94752
760S8M95760
768S8M96768
776S8M97776
784S8M98784
792S8M99792
800S8M100800
808S8M101808
816S8M102816
824S8M103824
832S8M104832
840S8M105840
848S8M106848
856S8M107856
864S8M108864
872S8M109872
880S8M110880
888S8M111888
896S8M112896
904S8M113904
912S8M114912
920S8M115920
928S8M116928
936S8M117936
944S8M118944
952S8M119952
960S8M120960
968S8M121968
976S8M122976
984S8M123984
992S8M124992
1000S8M1251000
1008S8M1261008
1016S8M1271016
1024S8M1281024
1032S8M1291032
1040S8M1301040
1048S8M1311048
1056S8M1321056
1064S8M1331064
1072S8M1341072
1080S8M1351080
1088S8M1361088
1096S8M1371096
1104S8M1381104
1112S8M1391112
1120S8M1401120
1128S8M1411128
1136S8M1421136
1144S8M1431144
1152S8M1441152
1160S8M1451160
1168S8M1461168
1176S8M1471176
1184S8M1481184
1192S8M1491192
1200S8M1501200
1208S8M1511208
1216S8M1521216
1224S8M1531224
1232S8M1541232
1240S8M1551240
1248S8M1561248
1256S8M1571256
1264S8M1581264
1272S8M1591272
1280S8M1601280
1296S8M1621296
1304S8M1631304
1312S8M1641312
1320S8M1651320
1328S8M1661328
1336S8M1671336
1344S8M1681344
1352S8M1691352
1360S8M1701360
1376S8M1721376
1384S8M1731384
1392S8M1741392
1400S8M1751400
1424S8M1781424
1432S8M1791432
1440S8M1801440
1480S8M1851480
1504S8M1881504
1512S8M1891512
1520S8M1901520
1528S8M1911528
1536S8M1921536
1544S8M1931544
1552S8M1941552
1560S8M1951560
1568S8M1961568
1576S8M1971576
1584S8M1981584
1592S8M1991592
1600S8M2001600
1608S8M2011608
1624S8M2031624
1632S8M2041632
1640S8M2051640
1648S8M2061648
1672S8M2091672
1680S8M2101680
1688S8M2111688
1696S8M2121696
1728S8M2161728
1760S8M2201760
1776S8M2221776
1792S8M2241792
1800S8M2251800
1816S8M2271816
1824S8M2281824
1832S8M2291832
1840S8M2301840
1880S8M2351880
1896S8M2371896
1904S8M2381904
1912S8M2391912
1920S8M2401920
1928S8M2411928
1936S8M2421936
1952S8M2441952
1960S8M2451960
2000S8M2502000
2016S8M2522016
2032S8M2542032
2040S8M2552040
2048S8M2562048
2056S8M2572056
2080S8M2602080
2104S8M2632104
2120S8M2652120
2136S8M2672136
2160S8M2702160
2200S8M2752200
2240S8M2802240
2256S8M2822256
2272S8M2842272
2288S8M2862288
2296S8M2872296
2304S8M2882304
2320S8M2902320
2400S8M3002400
2432S8M3042432
2448S8M3062448
2464S8M3082464
2496S8M3122496
2504S8M3132504
2520S8M3152520
2536S8M3172536
2560S8M3202560
2600S8M3252600
2624S8M3282624
2680S8M3352680
2736S8M3422736
2760S8M3452760
2800S8M3502800
2848S8M3562848
2880S8M3602880
2904S8M3632904
2920S8M3652920
2944S8M3682944
3000S8M3753000
3048S8M3813048
3120S8M3903120
3200S8M4003200
3264S8M4083264
3280S8M4103280
3304S8M4133304
3400S8M4253400
3440S8M4303440
3600S8M4503600
3680S8M4603680
3800S8M4753800
3880S8M4853880
4000S8M5004000
4400S8M5504400
5280S8M6605280

Product Feature

S type circular tooth profile economic type timing belt is made of rubber, featuring deviation prevention and wear resistance ■ S type circular tooth profile rubber timing belt (S2M/S3M/S5M/S8M/S14M)
Feature 1: Reasonable semi-circular arc tooth profile design can provide higher torque to adapt to high load transmission.
Feature 2: Reduce the noise generated by high-speed operation.
Feature 3: Tooth peak changes under force, ensuring a longer life than conventional circular tooth profile teeth.
Feature 4: Have certain conductivity
Feature 5: Operating Temperature Range: -30 to 90℃.
Features of P type domestic high-accuracy circular tooth profile timing belt ■ P type circular tooth profile rubber timing belt (P5M/P8M)
Feature 1: Reasonable semi-circular arc tooth profile design can provide higher torque to adapt to high load transmission.
Feature 2: Special concave tooth peak design, better reducing noise generated by high-speed operation.
Feature 3: Tooth peak changes under force, ensuring greater accuracy than conventional circular tooth profile teeth.
Feature 4: Have certain conductivity
Feature 5: Operating Temperature Range: -25 to 80℃.
Trapezoidal tooth profile timing belt is suitable for light load transmission and driving ■ Trapezoidal tooth profile rubber timing belt (MXL/XL/H/T5/T10)
Feature 1: Suitable for light load transmission, standard torque driving.
Feature 2: Tooth rubber uses chloroprene to protect core wire, providing excellent bending fatigue resistance, heat resistance, oil resistance
Feature 3: Ideal choice of economical and maintenance-free alternative to traditional transmission method.
Feature 4: Have certain conductivity
Feature 5: Operating Temperature Range: -30 to 90℃ (MXL/XL/H) , 0 to 80℃ (T5/T10)

Example of Use

Usage Method Example DrawingInstructions for use of timing wheel and timing belt
The TIMING BELT is installed on the motor and the rotating shaft to transmit the rotational force① Driving (The driven wheel is driven by the driving wheel for transmission)
Transmission belt, used for repeated motion with the object not rotating and high requirements on positioning accuracy② Transmission (Used for repeated motion with the object not rotating and high requirements on positioning accuracy)
Usage Method Example DrawingInstructions for use of timing wheel and timing belt
Plates are conveyed by two timing toothed belts③ Conveyance (Plates are conveyed by two timing toothed belts)
Usage method and example for conveyor belt lifting, repeated positioning motion④ Traction transmission (Workpieces are clamped and transmitted by the belt)

Usage Method

■ Installation method for timing belt transmission
①Turn off the power supply, remove the protective cover, loosen the motor assembly bolts, move the motor so that the belt is loose enough. The belt can be removed without prying. Never try to pry the belt down.
②Remove the old belt and check for abnormal wear. Excessive wear may mean that there are problems in the design or maintenance of the transmission device.
③Choose the right belt to replace.
④To clean the belt and pulley, wipe with a cloth dipped in a small amount of non-volatile liquid. Soaking in detergent or scrubbing the belt with detergent is not advisable. To remove grease, it is also undesirable to wipe with sandpaper or scratch with a sharp object. The belt must be kept dry before installation and use.
⑤Check the pulley for abnormal wear or cracks. If the wear is excessive, the pulley must be replaced.
⑥Check whether the pulley is linearly symmetrical. Linear symmetry of the pulley is essential for the operation of the timing belt, especially the timing belt transmission device.
Asymmetry of the pulley is shown as follows:
 Usage method Installation guide Complete selection Fit installation
⑦Check the remaining transmission device components, such as bearings and bushings, for symmetry, durability, lubrication and other conditions.
⑧Install a new belt on the pulley. Never pry or use too much force.
⑨Tighten to narrow the center distance of the transmission device until the tension tester detects that the belt tension is appropriate. Turn the driving wheel several times with your hands. Re-test tension.
⑩Tighten the assembly bolts of the motor and correct the torque. Since any change in the center distance of the transmission device during operation will result in poor belt performance, it is important to ensure that all transmission components have been tightened.
⑪Start the device and observe the belt performance to see if there is abnormal vibration, and listen carefully if there is abnormal noise. It is best to turn off the machine and check the conditions of the bearing and motor. If it feels too hot to the touch, the belt may be too tight, the bearing may be asymmetrical, or the lubrication may be incorrect.

Precautions

① Do not bend the timing belt by force.
It is strictly forbidden to bend the belt, which easily causes breakage

Do not use in direct contact with water, solvent, oil, acid, alkali, UV, ozone, etc.
110302717070 Water110302717070 Acid110302717070 Alkali110302717070 Oil110302717070 UV
③ Please avoid using or keeping at extreme high or low temperatures beyond the operating temperature range, or in humid environments.
④ During installation and maintenance, be sure to cut off the power supply and confirm that the machine is completely stopped before proceeding.
⑤ When there may be impurities, be sure to set the guard.

Application Industries

Food Semiconductor Smartphone
110302717070 Lithium battery 110302717070 Semiconductor 110302717070 Smart phone
Automotive Electronic & Electrical Appliances Medical
110302717070 Automotive 110302717070 Electronic & electrical appliances 110302717070 Medical

Related Products

High Torque Timing Pulleys S2M Type Flat Belt (Economy Series) Toothed Timing Belt MXL XL L H Type
TIMING PULLY High torque timing pulley MISUMI brand Pulley manufacturer S2M FLATBELT Flat belt Conveyor belt Transportation belt MISUMI brand Economic type Domestic timing belt Low price Short delivery time
Typical model: HTPA48S2M040-B-N10 Typical model: HBLT350-4.23 Typical model: C-TBN236MXL025


Part Number 

  • Incomplete part number.
    Please use left hand selections to complete a part number.    Incomplete part number.
    Please use left hand selections to complete a part number.
Loading...Tải…
30
60
90
  1. << PrevTrước
  2. 1
  3. 2
  4. 3
  5. 4
  6. 5
  7. NextKế tiếp >>
Part Number
C-HTBN1376S8M-150
C-HTBN1376S8M-250
C-HTBN1376S8M-300
C-HTBN1376S8M-400
C-HTBN1384S8M-150
C-HTBN1384S8M-250
C-HTBN1384S8M-300
C-HTBN1384S8M-400
C-HTBN1392S8M-150
C-HTBN1392S8M-250
C-HTBN1392S8M-300
C-HTBN1392S8M-400
C-HTBN1400S8M-150
C-HTBN1400S8M-250
C-HTBN1400S8M-300
C-HTBN1400S8M-400
C-HTBN1424S8M-150
C-HTBN1424S8M-250
C-HTBN1424S8M-300
C-HTBN1424S8M-400
C-HTBN1432S8M-150
C-HTBN1432S8M-250
C-HTBN1432S8M-300
C-HTBN1432S8M-400
C-HTBN1440S8M-150
C-HTBN1440S8M-250
C-HTBN1440S8M-300
C-HTBN1440S8M-400
C-HTBN1480S8M-150
C-HTBN1480S8M-250
C-HTBN1480S8M-300
C-HTBN1480S8M-400
C-HTBN1504S8M-150
C-HTBN1504S8M-250
C-HTBN1504S8M-300
C-HTBN1504S8M-400
C-HTBN1512S8M-150
C-HTBN1512S8M-250
C-HTBN1512S8M-300
C-HTBN1512S8M-400
C-HTBN1520S8M-150
C-HTBN1520S8M-250
C-HTBN1520S8M-300
C-HTBN1520S8M-400
C-HTBN1528S8M-150
C-HTBN1528S8M-250
C-HTBN1528S8M-300
C-HTBN1528S8M-400
C-HTBN1536S8M-150
C-HTBN1536S8M-250
C-HTBN1536S8M-300
C-HTBN1536S8M-400
C-HTBN1544S8M-150
C-HTBN1544S8M-250
C-HTBN1544S8M-300
C-HTBN1544S8M-400
C-HTBN1552S8M-150
C-HTBN1552S8M-250
C-HTBN1552S8M-300
C-HTBN1552S8M-400
C-HTBN1560S8M-150
C-HTBN1560S8M-250
C-HTBN1560S8M-300
C-HTBN1560S8M-400
C-HTBN1568S8M-150
C-HTBN1568S8M-250
C-HTBN1568S8M-300
C-HTBN1568S8M-400
C-HTBN1576S8M-150
C-HTBN1576S8M-250
C-HTBN1576S8M-300
C-HTBN1576S8M-400
C-HTBN1584S8M-150
C-HTBN1584S8M-250
C-HTBN1584S8M-300
C-HTBN1584S8M-400
C-HTBN1592S8M-150
C-HTBN1592S8M-250
C-HTBN1592S8M-300
C-HTBN1592S8M-400
C-HTBN1600S8M-150
C-HTBN1600S8M-250
C-HTBN1600S8M-300
C-HTBN1600S8M-400
C-HTBN1608S8M-150
C-HTBN1608S8M-250
C-HTBN1608S8M-300
C-HTBN1608S8M-400
C-HTBN1624S8M-150
C-HTBN1624S8M-250
Part NumberPriceMinimum Order Qty.Volume DiscountDays to ShipSố ngày giao hàngCore Wire Material Belt Width (mm)
(mm) 		Circumference Length
(mm) 		Number of Teeth

134,573 VND

4 Piece(s) Available 10 Day(s) [Glass Fiber] Glass Fiber151376172

222,645 VND

4 Piece(s) Available 10 Day(s) [Glass Fiber] Glass Fiber251376172

266,643 VND

1 Piece(s) Available Same day [Glass Fiber] Glass Fiber301376172

354,714 VND

4 Piece(s) Available 10 Day(s) [Glass Fiber] Glass Fiber401376172

189,729 VND

4 Piece(s) Available 5 Day(s) [Glass Fiber] Glass Core Wire151384173

320,321 VND

4 Piece(s) Available 5 Day(s) [Glass Fiber] Glass Core Wire251384173

381,968 VND

4 Piece(s) Available 5 Day(s) [Glass Fiber] Glass Core Wire301384173

517,350 VND

4 Piece(s) Available 5 Day(s) [Glass Fiber] Glass Core Wire401384173

140,728 VND

4 Piece(s) Available 12 Day(s) [Glass Fiber] Glass Fiber151392174

232,975 VND

4 Piece(s) Available 12 Day(s) [Glass Fiber] Glass Fiber251392174

279,024 VND

4 Piece(s) Available 12 Day(s) [Glass Fiber] Glass Fiber301392174

371,274 VND

4 Piece(s) Available 12 Day(s) [Glass Fiber] Glass Fiber401392174

136,857 VND

4 Piece(s) Available 10 Day(s) [Glass Fiber] Glass Fiber151400175

226,451 VND

4 Piece(s) Available 10 Day(s) [Glass Fiber] Glass Fiber251400175

271,285 VND

4 Piece(s) Available 10 Day(s) [Glass Fiber] Glass Fiber301400175

360,879 VND

4 Piece(s) Available 10 Day(s) [Glass Fiber] Glass Fiber401400175

143,924 VND

1 Piece(s) Available Same day [Glass Fiber] Glass Fiber151424178

238,230 VND

4 Piece(s) Available 12 Day(s) [Glass Fiber] Glass Fiber251424178

285,419 VND

4 Piece(s) Available 12 Day(s) [Glass Fiber] Glass Fiber301424178

379,721 VND

4 Piece(s) Available 12 Day(s) [Glass Fiber] Glass Fiber401424178

138,091 VND

1 Piece(s) 10 Day(s) [Glass Fiber] Glass Core Wire15--

226,834 VND

1 Piece(s) 10 Day(s) [Glass Fiber] Glass Core Wire25--

278,792 VND

1 Piece(s) 10 Day(s) [Glass Fiber] Glass Core Wire30--

367,455 VND

1 Piece(s) 10 Day(s) [Glass Fiber] Glass Core Wire40--

230,317 VND

1 Piece(s) Available Same day [Glass Fiber] Glass Fiber151440180

382,243 VND

4 Piece(s) Available 10 Day(s) [Glass Fiber] Glass Fiber251440180

458,208 VND

1 Piece(s) Available Same day [Glass Fiber] Glass Fiber301440180

610,131 VND

4 Piece(s) Available 10 Day(s) [Glass Fiber] Glass Fiber401440180

144,542 VND

1 Piece(s) Available Same day [Glass Fiber] Glass Fiber151480185

239,315 VND

1 Piece(s) Available Same day [Glass Fiber] Glass Fiber251480185

286,662 VND

4 Piece(s) Available 10 Day(s) [Glass Fiber] Glass Fiber301480185

381,356 VND

4 Piece(s) Available 10 Day(s) [Glass Fiber] Glass Fiber401480185

146,828 VND

4 Piece(s) Available 10 Day(s) [Glass Fiber] Glass Fiber151504188

243,122 VND

4 Piece(s) Available 10 Day(s) [Glass Fiber] Glass Fiber251504188

291,232 VND

4 Piece(s) Available 10 Day(s) [Glass Fiber] Glass Fiber301504188

387,523 VND

4 Piece(s) Available 10 Day(s) [Glass Fiber] Glass Fiber401504188

147,590 VND

4 Piece(s) Available 10 Day(s) [Glass Fiber] Glass Fiber151512189

244,416 VND

4 Piece(s) Available 10 Day(s) [Glass Fiber] Glass Fiber251512189

292,753 VND

4 Piece(s) Available 10 Day(s) [Glass Fiber] Glass Fiber301512189

389,575 VND

4 Piece(s) Available 10 Day(s) [Glass Fiber] Glass Fiber401512189

148,428 VND

4 Piece(s) Available 10 Day(s) [Glass Fiber] Glass Fiber151520190

245,711 VND

1 Piece(s) Available Same day [Glass Fiber] Glass Fiber251520190

294,351 VND

1 Piece(s) Available Same day [Glass Fiber] Glass Fiber301520190

391,632 VND

4 Piece(s) Available 10 Day(s) [Glass Fiber] Glass Fiber401520190

147,027 VND

1 Piece(s) 10 Day(s) [Glass Fiber] Glass Core Wire15--

241,704 VND

1 Piece(s) 10 Day(s) [Glass Fiber] Glass Core Wire25--

296,588 VND

1 Piece(s) 10 Day(s) [Glass Fiber] Glass Core Wire30--

391,261 VND

1 Piece(s) 10 Day(s) [Glass Fiber] Glass Core Wire40--

147,821 VND

1 Piece(s) 10 Day(s) [Glass Fiber] Glass Core Wire15--

250,556 VND

1 Piece(s) 10 Day(s) [Glass Fiber] Glass Core Wire25--

298,089 VND

1 Piece(s) 10 Day(s) [Glass Fiber] Glass Core Wire30--

393,239 VND

1 Piece(s) 10 Day(s) [Glass Fiber] Glass Core Wire40--

155,873 VND

4 Piece(s) Available 12 Day(s) [Glass Fiber] Glass Fiber151544193

258,094 VND

4 Piece(s) Available 12 Day(s) [Glass Fiber] Glass Fiber251544193

309,242 VND

4 Piece(s) Available 12 Day(s) [Glass Fiber] Glass Fiber301544193

411,538 VND

4 Piece(s) Available 12 Day(s) [Glass Fiber] Glass Fiber401544193

151,472 VND

4 Piece(s) Available 10 Day(s) [Glass Fiber] Glass Fiber151552194

250,811 VND

4 Piece(s) Available 10 Day(s) [Glass Fiber] Glass Fiber251552194

300,439 VND

4 Piece(s) Available 10 Day(s) [Glass Fiber] Glass Fiber301552194

399,776 VND

4 Piece(s) Available 10 Day(s) [Glass Fiber] Glass Fiber401552194

152,235 VND

4 Piece(s) Available 10 Day(s) [Glass Fiber] Glass Fiber151560195

252,104 VND

4 Piece(s) Available 10 Day(s) [Glass Fiber] Glass Fiber251560195

301,960 VND

4 Piece(s) Available 10 Day(s) [Glass Fiber] Glass Fiber301560195

401,830 VND

4 Piece(s) Available 10 Day(s) [Glass Fiber] Glass Fiber401560195

152,995 VND

4 Piece(s) Available 10 Day(s) [Glass Fiber] Glass Fiber151568196

253,322 VND

4 Piece(s) Available 10 Day(s) [Glass Fiber] Glass Fiber251568196

303,561 VND

4 Piece(s) Available 10 Day(s) [Glass Fiber] Glass Fiber301568196

403,885 VND

4 Piece(s) Available 10 Day(s) [Glass Fiber] Glass Fiber401568196

151,538 VND

1 Piece(s) 10 Day(s) [Glass Fiber] Glass Core Wire15--

256,724 VND

1 Piece(s) 10 Day(s) [Glass Fiber] Glass Core Wire25--

305,524 VND

1 Piece(s) 10 Day(s) [Glass Fiber] Glass Core Wire30--

403,206 VND

1 Piece(s) 10 Day(s) [Glass Fiber] Glass Core Wire40--

152,250 VND

1 Piece(s) 10 Day(s) [Glass Fiber] Glass Core Wire15--

257,990 VND

1 Piece(s) 10 Day(s) [Glass Fiber] Glass Core Wire25--

307,027 VND

1 Piece(s) 10 Day(s) [Glass Fiber] Glass Core Wire30--

405,183 VND

1 Piece(s) 10 Day(s) [Glass Fiber] Glass Core Wire40--

155,279 VND

4 Piece(s) Available 10 Day(s) [Glass Fiber] Glass Fiber151592199

257,204 VND

4 Piece(s) Available 10 Day(s) [Glass Fiber] Glass Fiber251592199

308,127 VND

4 Piece(s) Available 10 Day(s) [Glass Fiber] Glass Fiber301592199

410,052 VND

4 Piece(s) Available 10 Day(s) [Glass Fiber] Glass Fiber401592199

255,639 VND

4 Piece(s) Available 10 Day(s) [Glass Fiber] Glass Fiber151600200

424,445 VND

1 Piece(s) Available Same day [Glass Fiber] Glass Fiber251600200

508,850 VND

4 Piece(s) Available 10 Day(s) [Glass Fiber] Glass Fiber301600200

677,654 VND

4 Piece(s) Available 10 Day(s) [Glass Fiber] Glass Fiber401600200

154,462 VND

1 Piece(s) 10 Day(s) [Glass Fiber] Glass Core Wire15--

261,708 VND

1 Piece(s) 10 Day(s) [Glass Fiber] Glass Core Wire25--

311,456 VND

1 Piece(s) 10 Day(s) [Glass Fiber] Glass Core Wire30--

411,114 VND

1 Piece(s) 10 Day(s) [Glass Fiber] Glass Core Wire40--

158,401 VND

4 Piece(s) Available 10 Day(s) [Glass Fiber] Glass Fiber151624203

262,302 VND

1 Piece(s) Available Same day [Glass Fiber] Glass Fiber251624203

Loading...Tải…

  1. << PrevTrước
  2. 1
  3. 2
  4. 3
  5. 4
  6. 5
  7. NextKế tiếp >>

Basic InformationThông tin cơ bản

Belt Shape Closed End Belt Tooth Surface Standard (Single Sided) Belt Material Rubber Belt
Belt Type S8M Belt Shape Type Round Tooth Profile Super Torque Transmission Torque High Torque Transmission

Frequently asked question (FAQ)FAQ

Question:Question: Why is the order model of the timing belt inconsistent with the actual belt label and engraving?
Answer:Answer: Order model is MISUMI product model, the label on the belt or printed model on the belt surface is the belt manufacturer model, which varies with manufacturer, but there will be no influence on the product itself.
Question:Question: The timing belt has been broken after use for a very short period of time. Is there a problem with the quality of the belt?
Answer:Answer: The timing belt is a standard product, and the same batch of products have very few individual quality problems, please refer to Main causes of premature breakage and corresponding countermeasures to troubleshoot the equipment in use.
Question:Question: Can alteration be made to the timing belt?
Answer:Answer: Alteration cannot be made to the circumference of the timing belt, and partial alteration can be made to the width.
Question:Question: What kind of belt is better to use under conditions that require high cleanliness?
Answer:Answer: The use of urethane belts is recommended, which has significantly improved dust drop, compared to the rubber belt.
Question:Question: What are the two main types of timing belts according to their functions? What is the role?
Answer:Answer: Timing belts are mainly divided into transmission type and driving type. For transmission type, the load can be placed on the timing belt surface for transmission. For driving type, no load is carried, and only the role of transmitting torque is played, which is similar to the role of chain.
Question:Question: How to judge or measure whether the belt tension meets the installation requirements?
Answer:Answer: It is recommended that the customer purchase the tension meter by himself and make a judgment according to the calculation formula of the initial design.
Question:Question: Which tooth type of the timing belt has the smallest clearance? What will it affect?
Answer:Answer: The arc tooth type has minimum clearance, which can improve such indicators as positioning accuracy and rigidity.

Check other FAQ (4 items) HideĐóng.

About MISUMIVề Misumi

About this WebsiteVề trang Web này

Useful ToolsCác công cụ hữu ích

Customer ServiceDịch vụ chăm sóc khách hàng

MISUMI Contact Monday to Saturday: 8:00 am - 5:00 pm Order cut off time is 5:00 pm Thứ 2 đến Thứ 7: 8 giờ sáng đến 5 giờ chiều Hạn chót đặt hàng là 5 giờ chiều

  • Tel:Số điện thoại:0222-361-1555
  • Fax:Số Fax:0222-361-2555
  • InquiryYêu cầu

MISUMI APP

MISUMI APP QR

Install MISUMI APP

TALK

TALK QR

TALK ID : Misumi_vn

Mobile View Xem trên điện thoại

MISUMI Vietnam Company Limited, Legal Representative: Tomohiro Watanabe,
phone: 0222-361-1555, e-mail: cs@misumi.com.vn, Enterprise Code: 0107514576,
Date of Issuance: 22 July 2016, Place of Issuance: Bac Ninh, Business Certificate No. 6573041568-KD dated 27 September 2016 issued by the People's Committee of Bac Ninh

Công ty TNHH MISUMI Việt Nam, Đại diện theo pháp luật: Tomohiro Watanabe,
Điện thoại: 0222-361-1555, e-mail: cs@misumi.com.vn, Mã số doanh nghiệp: 0107514576,
ngày cấp 22/7/2016, nơi cấp: Bắc Ninh, Giấy phép kinh doanh số: 6573041568-KD ngày cấp 27/9/2016 bởi UBND tỉnh Bắc Ninh

online.gov.vn

Copyright © MISUMI Corporation All Rights Reserved.