Carbide Radius End Mills（Page4）

• You can add up to 6 items per a category to the compare list. Compare

  

  CRS40HSP High Efficiency 3-Flute Long Neck Radius 40° Twist

  UNION TOOL

  [Features]· High Efficiency 3-Flute Long Neck Radius (Short Blade)· 40° Torsion· Supports materials from SUS to pre-hardened and hardened steel (60 HRC)

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  2 ～ 12	0.1 ～ 0.5	3 ～ 15	3	38 ～ 120	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Graphite[○] / Resin[○]	3 ～ 12	6 ～ 54	Plane / Side / Groove	For High Hardness (Silicon Group)	Long-Neck Radius	Standard torsion (30-40°)	-

  From: 1,907,262 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CRS20HSP High Efficiency 4-Flute Long Neck Radius 20° Twist

  UNION TOOL

  [Features]· High-rigidity 4-flute radius 8 (for high-hardness materials). 20° torsion.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  2　 ～ 12	0.2 ～ 1.2	2.5 ～ 15	4	50 ～ 75	general steel[○] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / Cast Iron[◎]	6 ～ 12	5 ～ 30	Plane / Side / Groove	For High Hardness (Silicon Group)	Long-Neck Radius	Weak torsion (15 to 25˚)	-

  From: 1,307,974 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  X Coated Radius End Mill for Trapezoidal Runner NERR-2X

  NS TOOL

  An end mill with a rounded bottom corner of the trapezoidal runner.Tool material, Ultrafine grain cemented carbideHelix angle, 30°Surface treatment, X coatingNo. of Flutes: 2Machining Applications: Grooving, Side Machining, Flat Surface Machiningcorner shape: radius

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  2 ～ 6	0.3 ～ 5	5 ～ 12	2	45 ～ 75	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Aluminum[○] / Copper[○]	4 ～ 12	-	Plane / Side / Curved surface	TiCN	Tapered neck radius	Standard torsion (30-40°)	0.02～-0.02

  From: 3,719,770 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MSRS430 MUGEN-COATING 4-Flute Radius End Mill

  NS TOOL

  [Notice] Alterations can now be specified. Please select from "Standard/Alterations Category" of narrowing conditions.[Features]・ Straight and corner radius machining possible at the same time・ A small diameter size has been added to the long-selling 2 × D flute length, 4-flute Corner radius end mill.・ A lineup of 31 sizes from ø1 to ø5 can improve the efficiency of fine machining.・ You can select the tool that suits the machining application purpose.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  6 ～ 12	0.1 ～ 3	12 ～ 24	4	80 ～ 110	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎]	6 ～ 12	-	Plane / Side / Curved surface	TiAlN	radius	Standard torsion (30-40°)	0.01～-0.01

  From: 2,655,124 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MHDH645R 6-Flute Radius-End Mill for High-Hardness

  NS TOOL

  [Notice] Alterations can now be specified. Please select from "Standard/Alterations Category" of narrowing conditions.[Features]・ The MUGEN Coating Premium for high hardness and the unique new shape give the tool excellent chipping resistance, and reduced chattering improves the finished surface.・ Achieves stable and long lifespan even during long-time machining in the high hardness region (48 to 65 HRC). In pursuit of the cutting diameter shape, the manufacturer improved the amount of tilt and machining precision.・ Multi-flute with a high helix angle improves cutting performance, and the corner radius shape suppresses chipping.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  5 ～ 12	0.2 ～ 2	10 ～ 24	6	60 ～ 80	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[◎] / Copper[○] / Resin[○]	6 ～ 12	-	Plane / Side / Curved surface	For High Hardness (Silicon Group)	radius	Powerful Torsion (45°-60°)	0.01～-0.01

  From: 2,655,124 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CBN End Mills 2 Flutes Radius

  OSG

  The three-dimensional negative shape of the R section provides both sharpness and rigidity, and the effect of the spiral blade suppresses fluctuations in cutting force, enabling high-precision side milling.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  0.5 ～ 3	0.05 ～ 0.5	0.3 ～ 1.8	2	45 ～ 50	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎]	4 ～ 6	1.5 ～ 6	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	-	radius	-	-

  From: 3,716,032 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Micro Grain Carbide End Mills PHOENIX Long Tough Radius

  OSG

  4-flute radius end mill long neck type suitable for rib machining.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  0.8 ～ 3	0.1 ～ 0.5	0.32 ～ 1.2	4	50	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○]	4	2 ～ 16.65	Plane / Side / Groove / Inclined Cuts	For High Hardness (Silicon Group)	radius	Standard torsion (30-40°)	0～-0.01

  From: 1,157,694 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CBN End Mills 2Flutes Long Neck Radius

  OSG

  The CBN construction enables high-efficiency and high-precision machining, and fewer tool changes make continuous machining possible, leading to cost reductions.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  0.5 ～ 3	0.05 ～ 0.5	0.3 ～ 1.8	2	45 ～ 50	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎]	4 ～ 6	2.5 ～ 12	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	-	radius	Standard torsion (30-40°)	±0.005

  From: 4,187,372 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SAGVR2T SA Coated Carbide Radius 2-Flute

  SANKO MFG

  [Features]· Ideal for corner rounding or cutting curved surfaces.· Can also be used to prevent chipped corners.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  3 ～ 20	0.5 ～ 5	10 ～ 45	2	50 ～ 115	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○]	6 ～ 20	-	Plane / Side / Curved surface / Groove / Inclined Cuts	TiAlN	radius	Standard torsion (30-40°)	0～+0.04

  From: 1,642,018 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SAGVR2LS SA Coating Carbide Radius 4-Flute Long Shank

  SANKO MFG

  [Features]· Suitable for corner rounding or cutting curved surfaces.· A long shank type which allows for machining in deep sections.· Finished surfaces can be improved and high-efficiency machining is possible.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  6 ～ 25	0.3 ～ 8	20 ～ 75	4	120 ～ 230	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○]	6 ～ 25	-	Plane / Side / Curved surface / Groove / Inclined Cuts	TiAlN	radius	Standard torsion (30-40°)	0～+0.04

  From: 3,310,003 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SAGVR2LS SA Coating Carbide Radius 2-Flute Long Shank

  SANKO MFG

  Suitable for corner rounding or cutting curved surfaces. The long shank allows for machining in deep sections.[Features]· A long shank type which allows for machining in deep sections.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  6 ～ 25	0.3 ～ 8	20 ～ 75	2	120 ～ 230	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○]	6 ～ 25	-	Plane / Side / Curved surface / Groove / Inclined Cuts	TiAlN	radius	Standard torsion (30-40°)	0～+0.04

  From: 2,895,318 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Radius End Mill 2-Flute

  ATOM

  Simultaneously machines rounded corners and straight base surfaces. High precision radius shape smoothly connects the straight part with the rounded part.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  1 ～ 6	0.1 ～ 2	3 ～ 15	2	45 ～ 60	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[◎] / Resin[◎]	4 ～ 6	-	Plane / Side / Curved surface	Non-Coated	radius	Standard torsion (30-40°)	±0.02 ～ ±0.05

  From: 1,439,593 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SCD2 End Mill with Corner R, 2-Flute, Non-Coated

  OKAZAKI SEIKO

  By adopting a long shank, it is possible to machine corner radius in deep parts.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  4 ～ 12	0.2 ～ 2	12 ～ 36	2	70 ～ 110	general steel[◎] / Quenched and tempered steel[○] / Aluminum[○] / Copper[○]	6 ～ 12	-	Plane / Groove	Non-Coated	radius	Standard torsion (30-40°)	-

  From: 1,415,785 VND
  Days to Ship: Số ngày giao hàng: 10 Day(s) or more

  10 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SCD2A End Mill with Corner R, 2-Flute, OK Coated

  OKAZAKI SEIKO

  By adopting a long shank, it is possible to machine corner radius in deep parts.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  4 ～ 12	0.2 ～ 2	12 ～ 36	2	70 ～ 110	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○]	6 ～ 12	-	Plane / Groove	TiAlN	radius	Standard torsion (30-40°)	-

  From: 1,836,506 VND
  Days to Ship: Số ngày giao hàng: 10 Day(s) or more

  10 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SCE4A Ultra-Strong Radius, 4-Flute, OK Coated

  OKAZAKI SEIKO

  A multi-function type end mill that is capable of groove milling and side milling as well as profiling.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  4 ～ 12	0.5 ～ 2	8 ～ 24	4	70 ～ 110	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○]	6 ～ 12	15 ～ 42	Plane / Side / Groove	TiAlN	radius	Powerful Torsion (45°-60°)	-

  From: 1,836,506 VND
  Days to Ship: Số ngày giao hàng: 10 Day(s) or more

  10 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SCE4H Ultra-Strong Radius, 4-Flute, OK Hard Coated

  OKAZAKI SEIKO

  Due to the effect of OK hard coat, it is a multi-functional corner radius end mill that can machine high hardness materials up to 65 HRC at high speed.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  4 ～ 12	0.5 ～ 2	8 ～ 24	4	70 ～ 110	general steel[○] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[◎]	6 ～ 12	15 ～ 42	Plane / Side / Groove	For High Hardness (Silicon Group)	radius	Powerful Torsion (45°-60°)	-

  From: 1,836,506 VND
  Days to Ship: Số ngày giao hàng: 10 Day(s) or more

  10 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Solid End Mill for Aluminum Machining AL-SEES3-LS-R Type

  DIJET

  Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  6 ～ 22	0.4 ～ 5	9 ～ 33	3	80 ～ 200	Aluminum[◎] / Copper[○]	5.8 ～ 20	-	Side / Groove	Non-Coated	radius	Powerful Torsion (45°-60°)	0.025～-0.025

  From: 1,912,288 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Solid End Mill for Aluminum Machining (Regular Blade) (with Corner Radius) AL-SEES2-R Type

  DIJET

  Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  6 ～ 20	0.4 ～ 5	17 ～ 45	2	55 ～ 115	Aluminum[◎] / Copper[○]	6 ～ 20	-	Side / Groove	Non-Coated	radius	Powerful Torsion (45°-60°)	0.025～-0.025

  From: 1,526,543 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Solid End Mill for Aluminum Machining (Regular Blade) (with Corner Radius) AL-SEES3-R Type

  DIJET

  Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  6 ～ 20	0.5 ～ 4	9 ～ 33	3	60 ～ 120	Aluminum[◎] / Copper[○]	6 ～ 20	-	Side / Groove	Non-Coated	radius	Powerful Torsion (45°-60°)	0.025～-0.025

  From: 2,113,088 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Solid End Mill for Aluminum Machining (Long Shank) (Under Neck) (with Corner Radius) AL-SEES2-LS-R Type

  DIJET

  Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  6 ～ 22	0.5 ～ 5	9 ～ 33	2	80 ～ 200	Aluminum[◎] / Copper[○]	5.8 ～ 20	-	Side	Non-Coated	radius	Powerful Torsion (45°-60°)	0.025～-0.025

  From: 1,981,613 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Super One-Cut End Mill DZ-SOCM4 Type (Medium Blade Length) (With Rounded Corners)

  DIJET

  Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  6 ～ 10	0.5	21 ～ 34	4	60 ～ 90	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Titanium[○]	6 ～ 10	-	Side	TiAlN	radius	Powerful Torsion (45°-60°)	-

  From: 2,665,286 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Super One-Cut End Mill DZ-SOCS4 Type (Regular Blade Length) (With Rounded Corners)

  DIJET

  Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  3 ～ 20	0.2 ～ 1	8 ～ 38	4	60 ～ 125	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Titanium[○]	6 ～ 20	-	Side / Groove	TiAlN	radius	Powerful Torsion (45°-60°)	-

  From: 2,079,667 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  One Cut Super Radius End Mill DV-OCSRLN

  DIJET

  Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  4 ～ 16	1 ～ 3	6 ～ 24	3	80 ～ 185	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Cast Iron[○]	4 ～ 16	20 ～ 120	Side / Curved surface	-	Long-Neck Radius	Powerful Torsion (45°-60°)	0.015～-0.015

  From: 3,650,565 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  One Cut Super Radius End Mill DV-OCSR

  DIJET

  Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  2 ～ 20	0.5 ～ 3	4 ～ 40	3	70 ～ 185	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Cast Iron[○]	6 ～ 20	6 ～ 15	Side / Curved surface	-	radius	Powerful Torsion (45°-60°)	0.015～-0.015

  From: 4,273,281 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  One-Cut Radius End Mill for Heat Resistant Alloy DV-OCSAR Type

  DIJET

  [Features]· Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  3 ～ 20	0.5 ～ 3	8 ～ 38	4	60 ～ 125	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[◎] / Titanium[◎]	6 ～ 20	10 ～ 15	Side / Curved surface	-	radius	Powerful Torsion (45°-60°)	0.02～-0.02

  From: 3,221,073 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Square End Mill Regular, 3-Flute, for Aluminum, Chamfered, with Oil Hole 3367

  GUHRING

  [Features]· Carbide endmill dedicated for aluminum.· With oil holes for internal lubrication.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  6 ～ 20	1 ～ 2.5	-	3	57 ～ 104	Aluminum[◎] / Copper[◎]	6 ～ 20	21 ～ 44	-	Non-Coated	radius	Powerful Torsion (45°-60°)	-

  From: 1,475,846 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Square End Mill, Regular, 2-Flute Corner R 3561

  GUHRING

  [Features]· Ideal for corner rounding of molds and machine parts.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  6 ～ 20	-	-	2	57 ～ 104	-	6 ～ 20	-	-	-	radius	Standard torsion (30-40°)	-

  From: 1,392,976 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Square End Mill, Regular, Strong Torsion Multi-Blade Corner (6/8-Flute) Corner R 3563

  GUHRING

  [Features]· Ideal for corner rounding of molds and machine parts.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  6 ～ 20	-	-	6 ～ 8	57 ～ 104	-	6 ～ 20	-	-	-	radius	Powerful Torsion (45°-60°)	-

  From: 1,706,926 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Diamond Coated End Mill, 2-Flute Corner Radius, Type-N 6722

  GUHRING

  [Features]· Diamond coated endmill suitable for graphite or plastic.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  6 ～ 12	-	10 ～ 22	2	57 ～ 83	-	6 ～ 12	21 ～ 38	-	Dia Coat	radius	Standard torsion (30-40°)	-

  From: 53,115 VND
  Days to Ship: Số ngày giao hàng: 24 Day(s) or more

  24 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Diamond Coated End Mill, 4-Flute Corner Radius, Type-N 6723

  GUHRING

  [Features]· Diamond coated endmill suitable for graphite or plastic.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  6 ～ 12	-	13 ～ 26	4	57 ～ 83	-	6 ～ 12	21 ～ 38	-	Dia Coat	radius	Standard torsion (30-40°)	-

  From: 53,115 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Square End Mill Regular 4-Flute Corner Radius for High Hardness Steel GF300T 3361

  GUHRING

  [Features]· Capable of machining hardened materials of hardness exceeding 60 HRC.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  3 ～ 16	0.5 ～ 2	-	4	57 ～ 92	Quenched and tempered steel[○] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎]	6 ～ 16	21 ～ 44	-	Other	radius	Standard torsion (30-40°)	-

  From: 1,681,826 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Square End Mill Long Multi-Flute (6-Flute) Corner Radius for High Hardness Steel 3363

  GUHRING

  [Features]· Capable of machining hardened materials of hardness exceeding 60 HRC.· Features short flutes and rounded corners with high rigidity, enabling high precision machining in deep areas.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  6 ～ 16	0.5 ～ 1	-	6	75 ～ 150	Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / Titanium[◎]	6 ～ 16	39 ～ 105	-	Other	Long-Neck Radius	Powerful Torsion (45°-60°)	-

  From: 1,681,826 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Square End Mill Long Neck 4-Flute Corner Radius for High Hardness Steel GF300T 3362

  GUHRING

  [Features]· Capable of machining hardened materials of hardness exceeding 60 HRC.· Suitable for machining in deep locations.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  6 ～ 16	1 ～ 2	-	4	75 ～ 150	Quenched and tempered steel[○] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎]	6 ～ 16	39 ～ 105	-	Other	Long-Neck Radius	Standard torsion (30-40°)	-

  From: 3,306,155 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Unequal Lead End Mill Regular 4-Flute Corner R RF100Ti 3498

  GUHRING

  [Features]· The adoption of a shape and coating ideal for titanium and titanium alloy enables high-efficiency machining.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  6 ～ 25	-	13 ～ 45	4	57 ～ 121	-	6 ～ 25	21 ～ 65	-	-	radius	Other	-

  From: 1,898,961 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroMill Plura, Carbide Corner Radius End Mill, Center-Cut

  SANDVIK

  Unique shape exhibits high performance

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  2 ～ 16	0.2 ～ 2	2 ～ 16	2 ～ 4	57 ～ 92	general steel[○] / Quenched and tempered steel[○] / High Hardness Steel-HRC60[○]	6 ～ 16	18 ～ 42	Groove	AlTiN	radius	Standard torsion (30-40°)	-

  From: 2,635,503 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CBN 2-Flute Corner Radius End Mill SBREF-2

  KYOWA SEIKO

  Direct carving of high hardness material and hardened steel.It is possible to increase the depth of cut.Machining applications (machining shape): flat surface / side surface / curved surface / groove / slanted cut

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  0.3 ～ 3	-	0.3 ～ 2	2	50 ～ 60	High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎]	4	-	Plane / Side / Curved surface / Groove / Inclined Cuts	Non-Coated	radius	Standard torsion (30-40°)	-

  From: 4,530,451 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CBN 3-Flute Corner Radius End Mill SBRE-3

  KYOWA SEIKO

  Direct carving of high hardness material and hardened steel.High-efficiency machining is possible with high feed.Machining applications (machining shape): flat surface / side surface / curved surface / groove / slanted cut

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  3 ～ 6	-	1.5 ～ 2	3	50 ～ 70	High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎]	6	-	Plane / Side / Curved surface / Groove / Inclined Cuts	Non-Coated	High-Feed Radius	Standard torsion (30-40°)	-

  From: 8,155,206 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CBN 3-Flute Corner Radius End Mill SBREF-3

  KYOWA SEIKO

  Direct carving of high hardness material and hardened steel.High-efficiency machining is possible with high feed.Machining applications (machining shape): flat surface / side surface / curved surface / groove / slanted cut

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  0.3 ～ 2	-	0.5 ～ 1.5	3	50	High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎]	4	-	Plane / Side / Curved surface / Groove / Inclined Cuts	Non-Coated	High-Feed Radius	Standard torsion (30-40°)	-

  From: 5,331,493 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  PCD End Mill with 2 Flutes and Corner Radius for Carbide Machining DCRE-2

  KYOWA SEIKO

  [Specifications]· Shape: Radius End Mill (carbide)· Material: PCD Polycrystalline Diamond· Work materials: For carbide alloy machining[Applications] Flat Surfaces / Side Surfaces / Curved Surfaces / Grooves / Inclined Cutting

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  0.5 ～ 2	-	0.5 ～ 1.5	2	50	-	4	-	Plane / Side / Curved surface / Groove / Inclined Cuts	Non-Coated	radius	No torsion	-

  From: 18,969,472 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  End Mill with 2 Carbide Flutes and Corner Radius KSER-2

  KYOWA SEIKO

  [Applications]It can be used for flat surface machining, side machining, curved surface machining, grooving, and inclined cutting. [Features]Using carbide materials with high hardness, it is possible to cut general steel, heat-treated steel, stainless steel and cast iron.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  1 ～ 4	-	1 ～ 40	2	50 ～ 80	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎]	4 ～ 6	-	Plane / Side / Curved surface / Groove / Inclined Cuts	Non-Coated	radius	Standard torsion (30-40°)	-

  From: 1,606,412 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  End Mill with 2 Carbide Flutes and Corner Radius KSR-2

  KYOWA SEIKO

  [Applications]It can be used for flat surface machining, side machining, curved surface machining, grooving, and inclined cutting. [Features]Using carbide materials with high hardness, it is possible to cut general steel, heat-treated steel, stainless steel and cast iron.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  1 ～ 6	-	3 ～ 13	2	40 ～ 50	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎]	4 ～ 6	-	Plane / Side / Curved surface / Groove / Inclined Cuts	Non-Coated	radius	Standard torsion (30-40°)	-

  From: 1,446,282 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  End Mill with 2 Carbide Flutes and Corner Radius KSRA-2

  KYOWA SEIKO

  [Applications]It can be used for flat surface machining, side machining, curved surface machining, grooving, and inclined cutting. [Features]Using carbide materials with high hardness, it is possible to cut general steel, heat-treated steel, stainless steel and cast iron.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  0.5 ～ 3	-	1.5 ～ 10	2	60	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎]	3	-	Plane / Side / Curved surface / Groove / Inclined Cuts	TiAlN	radius	Standard torsion (30-40°)	-

  From: 1,886,934 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Endmill with 3 Carbide Flutes for Aluminum Alloys for Use with Vertical Walls ALRE-3DLC

  KYOWA SEIKO

  [Specifications]· Shape: Radius End Mill (carbide)· Material: Super Micro Grain Alloy· Work materials: General steel [◎] / tempered steel [○] / stainless steel [◎] / cast iron [◎][Applications] Flat Surfaces / Side Surfaces / Curved Surfaces / Grooves / Inclined Cutting

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  8 ～ 16	-	12 ～ 24	3	100 ～ 160	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎]	6 ～ 14	-	Plane / Side / Curved surface / Groove / Inclined Cuts	DLC	-	Powerful Torsion (45°-60°)	-

  From: 3,008,432 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Endmill with 3 Carbide Flutes and Corner Radius for Aluminum Alloys Short Type ALERS-3DLC

  KYOWA SEIKO

  [Specifications]· Shape: Radius End Mill (carbide)· Material: Super Micro Grain Alloy· Work Materials: Aluminum [◎], Copper [◎][Applications] Flat Surfaces / Side Surfaces / Curved Surfaces / Grooves / Inclined Cutting

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  3 ～ 16	-	6 ～ 32	3	60 ～ 100	Aluminum[◎] / Copper[◎]	6 ～ 16	-	Plane / Side / Curved surface / Groove / Inclined Cuts	DLC	-	Powerful Torsion (45°-60°)	-

  From: 1,987,064 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Endmill with 3 Carbide Flutes and Corner Radius for Aluminum Alloys Strong Type ALERT-3DLC

  KYOWA SEIKO

  [Specifications]· Shape: Radius End Mill (carbide)· Material: Super Micro Grain Alloy· Work Materials: Aluminum [◎], Copper [◎][Applications] Flat Surfaces / Side Surfaces / Curved Surfaces / Grooves / Inclined Cutting

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  3 ～ 16	-	4.5 ～ 24	3	60 ～ 120	Aluminum[◎] / Copper[◎]	6 ～ 16	-	Plane / Side / Curved surface / Groove / Inclined Cuts	DLC	-	Powerful Torsion (45°-60°)	-

  From: 1,846,803 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

BrandNhãn hiệu
Product SeriesDòng sản phẩm
From
Days to ShipSố ngày giao hàng
Blade diameter (D)(φ)
R Size(mm)
Blade length (ℓ)(mm)
Number of flutes(sheet)
Overall Length (L)(mm)
work material
Shank diameter (d)(mm)
Underneck length (ℓ1)(mm)
Machining Application
Coating
Type
Torsion Angle (θ)
R Precision(μm)

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
BrandNhãn hiệu	UNION TOOL	UNION TOOL	NS TOOL	NS TOOL	NS TOOL	OSG	OSG	OSG	SANKO MFG	SANKO MFG	SANKO MFG	ATOM	OKAZAKI SEIKO	OKAZAKI SEIKO	OKAZAKI SEIKO	OKAZAKI SEIKO	DIJET	DIJET	DIJET	DIJET	DIJET	DIJET	DIJET	DIJET	DIJET	GUHRING	GUHRING	GUHRING	GUHRING	GUHRING	GUHRING	GUHRING	GUHRING	GUHRING	SANDVIK	KYOWA SEIKO	KYOWA SEIKO	KYOWA SEIKO	KYOWA SEIKO	KYOWA SEIKO	KYOWA SEIKO	KYOWA SEIKO	KYOWA SEIKO	KYOWA SEIKO	KYOWA SEIKO
Product SeriesDòng sản phẩm	CRS40HSP High Efficiency 3-Flute Long Neck Radius 40° Twist	CRS20HSP High Efficiency 4-Flute Long Neck Radius 20° Twist	X Coated Radius End Mill for Trapezoidal Runner NERR-2X	MSRS430 MUGEN-COATING 4-Flute Radius End Mill	MHDH645R 6-Flute Radius-End Mill for High-Hardness	CBN End Mills 2 Flutes Radius	Micro Grain Carbide End Mills PHOENIX Long Tough Radius	CBN End Mills 2Flutes Long Neck Radius	SAGVR2T SA Coated Carbide Radius 2-Flute	SAGVR2LS SA Coating Carbide Radius 4-Flute Long Shank	SAGVR2LS SA Coating Carbide Radius 2-Flute Long Shank	Radius End Mill 2-Flute	SCD2 End Mill with Corner R, 2-Flute, Non-Coated	SCD2A End Mill with Corner R, 2-Flute, OK Coated	SCE4A Ultra-Strong Radius, 4-Flute, OK Coated	SCE4H Ultra-Strong Radius, 4-Flute, OK Hard Coated	Solid End Mill for Aluminum Machining AL-SEES3-LS-R Type	Solid End Mill for Aluminum Machining (Regular Blade) (with Corner Radius) AL-SEES2-R Type	Solid End Mill for Aluminum Machining (Regular Blade) (with Corner Radius) AL-SEES3-R Type	Solid End Mill for Aluminum Machining (Long Shank) (Under Neck) (with Corner Radius) AL-SEES2-LS-R Type	Super One-Cut End Mill DZ-SOCM4 Type (Medium Blade Length) (With Rounded Corners)	Super One-Cut End Mill DZ-SOCS4 Type (Regular Blade Length) (With Rounded Corners)	One Cut Super Radius End Mill DV-OCSRLN	One Cut Super Radius End Mill DV-OCSR	One-Cut Radius End Mill for Heat Resistant Alloy DV-OCSAR Type	Square End Mill Regular, 3-Flute, for Aluminum, Chamfered, with Oil Hole 3367	Square End Mill, Regular, 2-Flute Corner R 3561	Square End Mill, Regular, Strong Torsion Multi-Blade Corner (6/8-Flute) Corner R 3563	Diamond Coated End Mill, 2-Flute Corner Radius, Type-N 6722	Diamond Coated End Mill, 4-Flute Corner Radius, Type-N 6723	Square End Mill Regular 4-Flute Corner Radius for High Hardness Steel GF300T 3361	Square End Mill Long Multi-Flute (6-Flute) Corner Radius for High Hardness Steel 3363	Square End Mill Long Neck 4-Flute Corner Radius for High Hardness Steel GF300T 3362	Unequal Lead End Mill Regular 4-Flute Corner R RF100Ti 3498	CoroMill Plura, Carbide Corner Radius End Mill, Center-Cut	CBN 2-Flute Corner Radius End Mill SBREF-2	CBN 3-Flute Corner Radius End Mill SBRE-3	CBN 3-Flute Corner Radius End Mill SBREF-3	PCD End Mill with 2 Flutes and Corner Radius for Carbide Machining DCRE-2	End Mill with 2 Carbide Flutes and Corner Radius KSER-2	End Mill with 2 Carbide Flutes and Corner Radius KSR-2	End Mill with 2 Carbide Flutes and Corner Radius KSRA-2	Endmill with 3 Carbide Flutes for Aluminum Alloys for Use with Vertical Walls ALRE-3DLC	Endmill with 3 Carbide Flutes and Corner Radius for Aluminum Alloys Short Type ALERS-3DLC	Endmill with 3 Carbide Flutes and Corner Radius for Aluminum Alloys Strong Type ALERT-3DLC
From	1,907,262 VND	1,307,974 VND	3,719,770 VND	2,655,124 VND	2,655,124 VND	3,716,032 VND	1,157,694 VND	4,187,372 VND	1,642,018 VND	3,310,003 VND	2,895,318 VND	1,439,593 VND	1,415,785 VND	1,836,506 VND	1,836,506 VND	1,836,506 VND	1,912,288 VND	1,526,543 VND	2,113,088 VND	1,981,613 VND	2,665,286 VND	2,079,667 VND	3,650,565 VND	4,273,281 VND	3,221,073 VND	1,475,846 VND	1,392,976 VND	1,706,926 VND	53,115 VND	53,115 VND	1,681,826 VND	1,681,826 VND	3,306,155 VND	1,898,961 VND	2,635,503 VND	4,530,451 VND	8,155,206 VND	5,331,493 VND	18,969,472 VND	1,606,412 VND	1,446,282 VND	1,886,934 VND	3,008,432 VND	1,987,064 VND	1,846,803 VND
Days to ShipSố ngày giao hàng	9 Day(s) or more	9 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	6 Day(s) or more	10 Day(s) or more	10 Day(s) or more	10 Day(s) or more	10 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	8 Day(s) or more	8 Day(s) or more	6 Day(s) or more	8 Day(s) or more	8 Day(s) or more	6 Day(s) or more	8 Day(s) or more	6 Day(s) or more	6 Day(s) or more	24 Day(s) or more	8 Day(s) or more	6 Day(s) or more	8 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more
Blade diameter (D)(φ)	2 ～ 12	2　 ～ 12	2 ～ 6	6 ～ 12	5 ～ 12	0.5 ～ 3	0.8 ～ 3	0.5 ～ 3	3 ～ 20	6 ～ 25	6 ～ 25	1 ～ 6	4 ～ 12	4 ～ 12	4 ～ 12	4 ～ 12	6 ～ 22	6 ～ 20	6 ～ 20	6 ～ 22	6 ～ 10	3 ～ 20	4 ～ 16	2 ～ 20	3 ～ 20	6 ～ 20	6 ～ 20	6 ～ 20	6 ～ 12	6 ～ 12	3 ～ 16	6 ～ 16	6 ～ 16	6 ～ 25	2 ～ 16	0.3 ～ 3	3 ～ 6	0.3 ～ 2	0.5 ～ 2	1 ～ 4	1 ～ 6	0.5 ～ 3	8 ～ 16	3 ～ 16	3 ～ 16
R Size(mm)	0.1 ～ 0.5	0.2 ～ 1.2	0.3 ～ 5	0.1 ～ 3	0.2 ～ 2	0.05 ～ 0.5	0.1 ～ 0.5	0.05 ～ 0.5	0.5 ～ 5	0.3 ～ 8	0.3 ～ 8	0.1 ～ 2	0.2 ～ 2	0.2 ～ 2	0.5 ～ 2	0.5 ～ 2	0.4 ～ 5	0.4 ～ 5	0.5 ～ 4	0.5 ～ 5	0.5	0.2 ～ 1	1 ～ 3	0.5 ～ 3	0.5 ～ 3	1 ～ 2.5	-	-	-	-	0.5 ～ 2	0.5 ～ 1	1 ～ 2	-	0.2 ～ 2	-	-	-	-	-	-	-	-	-	-
Blade length (ℓ)(mm)	3 ～ 15	2.5 ～ 15	5 ～ 12	12 ～ 24	10 ～ 24	0.3 ～ 1.8	0.32 ～ 1.2	0.3 ～ 1.8	10 ～ 45	20 ～ 75	20 ～ 75	3 ～ 15	12 ～ 36	12 ～ 36	8 ～ 24	8 ～ 24	9 ～ 33	17 ～ 45	9 ～ 33	9 ～ 33	21 ～ 34	8 ～ 38	6 ～ 24	4 ～ 40	8 ～ 38	-	-	-	10 ～ 22	13 ～ 26	-	-	-	13 ～ 45	2 ～ 16	0.3 ～ 2	1.5 ～ 2	0.5 ～ 1.5	0.5 ～ 1.5	1 ～ 40	3 ～ 13	1.5 ～ 10	12 ～ 24	6 ～ 32	4.5 ～ 24
Number of flutes(sheet)	3	4	2	4	6	2	4	2	2	4	2	2	2	2	4	4	3	2	3	2	4	4	3	3	4	3	2	6 ～ 8	2	4	4	6	4	4	2 ～ 4	2	3	3	2	2	2	2	3	3	3
Overall Length (L)(mm)	38 ～ 120	50 ～ 75	45 ～ 75	80 ～ 110	60 ～ 80	45 ～ 50	50	45 ～ 50	50 ～ 115	120 ～ 230	120 ～ 230	45 ～ 60	70 ～ 110	70 ～ 110	70 ～ 110	70 ～ 110	80 ～ 200	55 ～ 115	60 ～ 120	80 ～ 200	60 ～ 90	60 ～ 125	80 ～ 185	70 ～ 185	60 ～ 125	57 ～ 104	57 ～ 104	57 ～ 104	57 ～ 83	57 ～ 83	57 ～ 92	75 ～ 150	75 ～ 150	57 ～ 121	57 ～ 92	50 ～ 60	50 ～ 70	50	50	50 ～ 80	40 ～ 50	60	100 ～ 160	60 ～ 100	60 ～ 120
work material	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Graphite[○] / Resin[○]	general steel[○] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / Cast Iron[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[◎] / Copper[○] / Resin[○]	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎]	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○]	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○]	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[◎] / Resin[◎]	general steel[◎] / Quenched and tempered steel[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○]	general steel[○] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[◎]	Aluminum[◎] / Copper[○]	Aluminum[◎] / Copper[○]	Aluminum[◎] / Copper[○]	Aluminum[◎] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Titanium[○]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Titanium[○]	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Cast Iron[○]	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Cast Iron[○]	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[◎] / Titanium[◎]	Aluminum[◎] / Copper[◎]	-	-	-	-	Quenched and tempered steel[○] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎]	Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / Titanium[◎]	Quenched and tempered steel[○] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎]	-	general steel[○] / Quenched and tempered steel[○] / High Hardness Steel-HRC60[○]	High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎]	High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎]	High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎]	-	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎]	Aluminum[◎] / Copper[◎]	Aluminum[◎] / Copper[◎]
Shank diameter (d)(mm)	3 ～ 12	6 ～ 12	4 ～ 12	6 ～ 12	6 ～ 12	4 ～ 6	4	4 ～ 6	6 ～ 20	6 ～ 25	6 ～ 25	4 ～ 6	6 ～ 12	6 ～ 12	6 ～ 12	6 ～ 12	5.8 ～ 20	6 ～ 20	6 ～ 20	5.8 ～ 20	6 ～ 10	6 ～ 20	4 ～ 16	6 ～ 20	6 ～ 20	6 ～ 20	6 ～ 20	6 ～ 20	6 ～ 12	6 ～ 12	6 ～ 16	6 ～ 16	6 ～ 16	6 ～ 25	6 ～ 16	4	6	4	4	4 ～ 6	4 ～ 6	3	6 ～ 14	6 ～ 16	6 ～ 16
Underneck length (ℓ1)(mm)	6 ～ 54	5 ～ 30	-	-	-	1.5 ～ 6	2 ～ 16.65	2.5 ～ 12	-	-	-	-	-	-	15 ～ 42	15 ～ 42	-	-	-	-	-	-	20 ～ 120	6 ～ 15	10 ～ 15	21 ～ 44	-	-	21 ～ 38	21 ～ 38	21 ～ 44	39 ～ 105	39 ～ 105	21 ～ 65	18 ～ 42	-	-	-	-	-	-	-	-	-	-
Machining Application	Plane / Side / Groove	Plane / Side / Groove	Plane / Side / Curved surface	Plane / Side / Curved surface	Plane / Side / Curved surface	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Curved surface / Groove / Inclined Cuts	Plane / Side / Curved surface / Groove / Inclined Cuts	Plane / Side / Curved surface / Groove / Inclined Cuts	Plane / Side / Curved surface	Plane / Groove	Plane / Groove	Plane / Side / Groove	Plane / Side / Groove	Side / Groove	Side / Groove	Side / Groove	Side	Side	Side / Groove	Side / Curved surface	Side / Curved surface	Side / Curved surface	-	-	-	-	-	-	-	-	-	Groove	Plane / Side / Curved surface / Groove / Inclined Cuts	Plane / Side / Curved surface / Groove / Inclined Cuts	Plane / Side / Curved surface / Groove / Inclined Cuts	Plane / Side / Curved surface / Groove / Inclined Cuts	Plane / Side / Curved surface / Groove / Inclined Cuts	Plane / Side / Curved surface / Groove / Inclined Cuts	Plane / Side / Curved surface / Groove / Inclined Cuts	Plane / Side / Curved surface / Groove / Inclined Cuts	Plane / Side / Curved surface / Groove / Inclined Cuts	Plane / Side / Curved surface / Groove / Inclined Cuts
Coating	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	TiCN	TiAlN	For High Hardness (Silicon Group)	-	For High Hardness (Silicon Group)	-	TiAlN	TiAlN	TiAlN	Non-Coated	Non-Coated	TiAlN	TiAlN	For High Hardness (Silicon Group)	Non-Coated	Non-Coated	Non-Coated	Non-Coated	TiAlN	TiAlN	-	-	-	Non-Coated	-	-	Dia Coat	Dia Coat	Other	Other	Other	-	AlTiN	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	TiAlN	DLC	DLC	DLC
Type	Long-Neck Radius	Long-Neck Radius	Tapered neck radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	Long-Neck Radius	radius	radius	radius	radius	radius	radius	radius	radius	Long-Neck Radius	Long-Neck Radius	radius	radius	radius	High-Feed Radius	High-Feed Radius	radius	radius	radius	radius	-	-	-
Torsion Angle (θ)	Standard torsion (30-40°)	Weak torsion (15 to 25˚)	Standard torsion (30-40°)	Standard torsion (30-40°)	Powerful Torsion (45°-60°)	-	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Standard torsion (30-40°)	Powerful Torsion (45°-60°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Powerful Torsion (45°-60°)	Standard torsion (30-40°)	Other	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	No torsion	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)
R Precision(μm)	-	-	0.02～-0.02	0.01～-0.01	0.01～-0.01	-	0～-0.01	±0.005	0～+0.04	0～+0.04	0～+0.04	±0.02 ～ ±0.05	-	-	-	-	0.025～-0.025	0.025～-0.025	0.025～-0.025	0.025～-0.025	-	-	0.015～-0.015	0.015～-0.015	0.02～-0.02	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-

Loading...Tải…