(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.

Tel: 0222-361-1555 Email: cs@misumi.com.vn 8:00 - 17:00 (Mon - Sat)

ものづくりの、明日を支える。MISUMI-VONA 生産材コマース ものづくりの、明日を支える。MISUMI-VONA 生産材コマース

Webcode Seach | Series: #CODE

Keyword suggestionsTừ khóa gợi ý

Part number suggestionsGợi ý mã sản phẩm

Discontinued Products

Search by Category / Brand Tìm theo danh mục, nhãn hiệu

Search by Category Tìm theo danh mục

MISUMI Việt Nam đẩy mạnh hợp tác với cơ sở đào tạo nhằm nâng cao chất lượng nguồn nhân lực kỹ sư tương lai. Xem chi tiết.
MISUMI Vietnam cooperates with Training Institutions to enhance the quality of future engineering workforce. See more.

How can we improve?

How can we improve?

Comments

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy

Thank you for your cooperation.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.

Customer Privacy Policy

ConfigureTạo

Part number has not been determine

(2,608 Part Numbers Available)

Configure Remaining SpecificationsĐịnh cấu hình các thông số còn lại

Part Number CompleteĐã hoàn thành

CPAB-1A1-[12-100/0.01]-P[0.8-0.99/0.01]-F[10-98.9/0.01]-V[0.5-0.98/0.01]

Specification/DimensionsĐặc điểm kỹ thuật / Kích thướcĐặc điểm kỹ thuật / Kích thước

Material
- SKH51
- SKD61
- NAK80
- DH2F
- SUS440C
- MAS1C
- STAVAX ESR
- PROVA400
ClearTrống
Shaft diameter tolerance
- 0/-0.005
- -0.01/-0.02
ClearTrống
L dimension tolerance
- +0.02/0
- 0/-0.1
ClearTrống
Tip gradient tolerance
- ±0.01
- ±0.015
ClearTrống
D/P (Shaft diameter)(mm)
[0.8-19.99/0.01mm Unit(s)][13-15.99/0.005mm Unit(s)]
ClearTrống
Step (Step shape of the first step)
- 1A
- 1B
- 1C
- 1D
- 1E
ClearTrống
No. (Nominal diameter)(mm)
1

1.5

2

2.5

3

3.5

4

4.5

5

5.5

6

6.5

7

8

10

13

16

20
ClearTrống
RE (R shape alteration・enlargement)(mm)
[0.5-2/0.5mm Unit(s)]
ClearTrống
A (Step shape diameter)(mm)
[0.4-19.99/0.01mm Unit(s)][2-15.98/0.005mm Unit(s)]
ClearTrống
C (Step type taper width)(mm)
[0.1-4/0.1mm Unit(s)]
ClearTrống
CVC (Designation of C dimension in increments of 0.01mm)(mm)
[0.05-4/0.01mm Unit(s)]
ClearTrống
F (Bearing bore length)(mm)
[10-149.5/0.01mm Unit(s)]
ClearTrống
G (Tip C chamfering width)(mm)
ClearTrống
K (Tip angle)(°)
ClearTrống
L (L dimension)(mm)
[12-150/0.01mm Unit(s)]
ClearTrống
Q (Tip R chamfering)(mm)
ClearTrống
R (Step type R)(mm)
0.2
[0.2-8/0.1mm Unit(s)]
ClearTrống
S (Tip tapered width)(mm)
ClearTrống
V (Tip diameter)(mm)
[0.5-19.99/0.01mm Unit(s)][2-15.98/0.005mm Unit(s)]
ClearTrống
VC (V dimension alteration, smaller than V min)(mm)
[0.4-0.49/0.01mm Unit(s)][0.7-6.48/0.01mm Unit(s)]
ClearTrống
type
- CPAB-1A
- CPAB-1AB
- CPAB-1AC
- CPAB-1AG
- CPAB-1AR
- CPAB-1AT
- CPAB-1B
- CPAB-1BB
- CPAB-1BC
- CPAB-1BG
- CPAB-1BR
- CPAB-1BT
- CPAB-1C
- CPAB-1CB
- CPAB-1CC
- CPAB-1CG
- CPAB-1CR
- CPAB-1CT
- CPAB-1D
- CPAB-1DB
- CPAB-1DC
- CPAB-1DG
- CPAB-1DR
- CPAB-1DT
- CPAB-1E
- CPAB-1EB
- CPAB-1EC
- CPAB-1EG
- CPAB-1ER
- CPAB-1ET
- CPDB-1A
- CPDB-1AB
- CPDB-1AC
- CPDB-1AG
- CPDB-1AR
- CPDB-1AT
- CPDB-1B
- CPDB-1BB
- CPDB-1BC
- CPDB-1BG
- CPDB-1BR
- CPDB-1BT
- CPDB-1C
- CPDB-1CB
- CPDB-1CC
- CPDB-1CG
- CPDB-1CR
- CPDB-1CT
- CPDB-1D
- CPDB-1DB
- CPDB-1DC
- CPDB-1DG
- CPDB-1DR
- CPDB-1DT
- CPDB-1E
- CPDB-1EB
- CPDB-1EC
- CPDB-1EG
- CPDB-1ER
- CPDB-1ET
- CPEHB-1A
- CPEHB-1AB
- CPEHB-1AC
- CPEHB-1AG
- CPEHB-1AR
- CPEHB-1AT
- CPEHB-1B
- CPEHB-1BB
- CPEHB-1BC
- CPEHB-1BG
- CPEHB-1BR
- CPEHB-1BT
- CPEHB-1C
- CPEHB-1CB
- CPEHB-1CC
- CPEHB-1CG
- CPEHB-1CR
- CPEHB-1CT
- CPEHB-1D
- CPEHB-1DB
- CPEHB-1DC
- CPEHB-1DG
- CPEHB-1DR
- CPEHB-1DT
- CPEHB-1E
- CPEHB-1EB
- CPEHB-1EC
- CPEHB-1EG
- CPEHB-1ER
- CPEHB-1ET
- CPFB-1A
- CPFB-1AB
- CPFB-1AC
- CPFB-1AG
- CPFB-1AR
- CPFB-1AT
- CPFB-1B
- CPFB-1BB
- CPFB-1BC
- CPFB-1BG
- CPFB-1BR
- CPFB-1BT
- CPFB-1C
- CPFB-1CB
- CPFB-1CC
- CPFB-1CG
- CPFB-1CR
- CPFB-1CT
- CPFB-1D
- CPFB-1DB
- CPFB-1DC
- CPFB-1DG
- CPFB-1DR
- CPFB-1DT
- CPFB-1E
- CPFB-1EB
- CPFB-1EC
- CPFB-1EG
- CPFB-1ER
- CPFB-1ET
- CPGB-1A
- CPGB-1AB
- CPGB-1AC
- CPGB-1AG
- CPGB-1AR
- CPGB-1AT
- CPGB-1B
- CPGB-1BB
- CPGB-1BC
- CPGB-1BG
- CPGB-1BR
- CPGB-1BT
- CPGB-1C
- CPGB-1CB
- CPGB-1CC
- CPGB-1CG
- CPGB-1CR
- CPGB-1CT
- CPGB-1D
- CPGB-1DB
- CPGB-1DC
- CPGB-1DG
- CPGB-1DR
- CPGB-1DT
- CPGB-1E
- CPGB-1EB
- CPGB-1EC
- CPGB-1EG
- CPGB-1ER
- CPGB-1ET
- CPHB-1A
- CPHB-1AB
- CPHB-1AC
- CPHB-1AG
- CPHB-1AR
- CPHB-1AT
- CPHB-1B
- CPHB-1BB
- CPHB-1BC
- CPHB-1BG
- CPHB-1BR
- CPHB-1BT
- CPHB-1C
- CPHB-1CB
- CPHB-1CC
- CPHB-1CG
- CPHB-1CR
- CPHB-1CT
- CPHB-1D
- CPHB-1DB
- CPHB-1DC
- CPHB-1DG
- CPHB-1DR
- CPHB-1DT
- CPHB-1E
- CPHB-1EB
- CPHB-1EC
- CPHB-1EG
- CPHB-1ER
- CPHB-1ET
- CPKB-1A
- CPKB-1AB
- CPKB-1AC
- CPKB-1AG
- CPKB-1AR
- CPKB-1AT
- CPKB-1B
- CPKB-1BB
- CPKB-1BC
- CPKB-1BG
- CPKB-1BR
- CPKB-1BT
- CPKB-1C
- CPKB-1CB
- CPKB-1CC
- CPKB-1CG
- CPKB-1CR
- CPKB-1CT
- CPKB-1D
- CPKB-1DB
- CPKB-1DC
- CPKB-1DG
- CPKB-1DR
- CPKB-1DT
- CPKB-1E
- CPKB-1EB
- CPKB-1EC
- CPKB-1EG
- CPKB-1ER
- CPKB-1ET
- CPNB-1A
- CPNB-1AB
- CPNB-1AC
- CPNB-1AG
- CPNB-1AR
- CPNB-1AT
- CPNB-1B
- CPNB-1BB
- CPNB-1BC
- CPNB-1BG
- CPNB-1BR
- CPNB-1BT
- CPNB-1C
- CPNB-1CB
- CPNB-1CC
- CPNB-1CG
- CPNB-1CR
- CPNB-1CT
- CPNB-1D
- CPNB-1DB
- CPNB-1DC
- CPNB-1DG
- CPNB-1DR
- CPNB-1DT
- CPNB-1E
- CPNB-1EB
- CPNB-1EC
- CPNB-1EG
- CPNB-1ER
- CPNB-1ET
- CPPB-1A
- CPPB-1AB
- CPPB-1AC
- CPPB-1AG
- CPPB-1AR
- CPPB-1AT
- CPPB-1B
- CPPB-1BB
- CPPB-1BC
- CPPB-1BG
- CPPB-1BR
- CPPB-1BT
- CPPB-1C
- CPPB-1CB
- CPPB-1CC
- CPPB-1CG
- CPPB-1CR
- CPPB-1CT
- CPPB-1D
- CPPB-1DB
- CPPB-1DC
- CPPB-1DG
- CPPB-1DR
- CPPB-1DT
- CPPB-1E
- CPPB-1EB
- CPPB-1EC
- CPPB-1EG
- CPPB-1ER
- CPPB-1ET
- CPQHB-1A
- CPQHB-1AB
- CPQHB-1AC
- CPQHB-1AG
- CPQHB-1AR
- CPQHB-1AT
- CPQHB-1B
- CPQHB-1BB
- CPQHB-1BC
- CPQHB-1BG
- CPQHB-1BR
- CPQHB-1BT
- CPQHB-1C
- CPQHB-1CB
- CPQHB-1CC
- CPQHB-1CG
- CPQHB-1CR
- CPQHB-1CT
- CPQHB-1D
- CPQHB-1DB
- CPQHB-1DC
- CPQHB-1DG
- CPQHB-1DR
- CPQHB-1DT
- CPQHB-1E
- CPQHB-1EB
- CPQHB-1EC
- CPQHB-1EG
- CPQHB-1ER
- CPQHB-1ET
- CPRHB-1A
- CPRHB-1AB
- CPRHB-1AC
- CPRHB-1AG
- CPRHB-1AR
- CPRHB-1AT
- CPRHB-1B
- CPRHB-1BB
- CPRHB-1BC
- CPRHB-1BG
- CPRHB-1BR
- CPRHB-1BT
- CPRHB-1C
- CPRHB-1CB
- CPRHB-1CC
- CPRHB-1CG
- CPRHB-1CR
- CPRHB-1CT
- CPRHB-1D
- CPRHB-1DB
- CPRHB-1DC
- CPRHB-1DG
- CPRHB-1DR
- CPRHB-1DT
- CPRHB-1E
- CPRHB-1EB
- CPRHB-1EC
- CPRHB-1EG
- CPRHB-1ER
- CPRHB-1ET
- CPTHB-1A
- CPTHB-1AB
- CPTHB-1AC
- CPTHB-1AG
- CPTHB-1AR
- CPTHB-1AT
- CPTHB-1B
- CPTHB-1BB
- CPTHB-1BC
- CPTHB-1BG
- CPTHB-1BR
- CPTHB-1BT
- CPTHB-1C
- CPTHB-1CB
- CPTHB-1CC
- CPTHB-1CG
- CPTHB-1CR
- CPTHB-1CT
- CPTHB-1D
- CPTHB-1DB
- CPTHB-1DC
- CPTHB-1DG
- CPTHB-1DR
- CPTHB-1DT
- CPTHB-1E
- CPTHB-1EB
- CPTHB-1EC
- CPTHB-1EG
- CPTHB-1ER
- CPTHB-1ET
- CPWB-1A
- CPWB-1AB
- CPWB-1AC
- CPWB-1AG
- CPWB-1AR
- CPWB-1AT
- CPWB-1B
- CPWB-1BB
- CPWB-1BC
- CPWB-1BG
- CPWB-1BR
- CPWB-1BT
- CPWB-1C
- CPWB-1CB
- CPWB-1CC
- CPWB-1CG
- CPWB-1CR
- CPWB-1CT
- CPWB-1D
- CPWB-1DB
- CPWB-1DC
- CPWB-1DG
- CPWB-1DR
- CPWB-1DT
- CPWB-1E
- CPWB-1EB
- CPWB-1EC
- CPWB-1EG
- CPWB-1ER
- CPWB-1ET
- CPXB-1A
- CPXB-1AB
- CPXB-1AC
- CPXB-1AG
- CPXB-1AR
- CPXB-1AT
- CPXB-1B
- CPXB-1BB
- CPXB-1BC
- CPXB-1BG
- CPXB-1BR
- CPXB-1BT
- CPXB-1C
- CPXB-1CB
- CPXB-1CC
- CPXB-1CG
- CPXB-1CR
- CPXB-1CT
- CPXB-1D
- CPXB-1DB
- CPXB-1DC
- CPXB-1DG
- CPXB-1DR
- CPXB-1DT
- CPXB-1E
- CPXB-1EB
- CPXB-1EC
- CPXB-1EG
- CPXB-1ER
- CPXB-1ET
- CPYB-1A
- CPYB-1AB
- CPYB-1AC
- CPYB-1AG
- CPYB-1AR
- CPYB-1AT
- CPYB-1B
- CPYB-1BB
- CPYB-1BC
- CPYB-1BG
- CPYB-1BR
- CPYB-1BT
- CPYB-1C
- CPYB-1CB
- CPYB-1CC
- CPYB-1CG
- CPYB-1CR
- CPYB-1CT
- CPYB-1D
- CPYB-1DB
- CPYB-1DC
- CPYB-1DG
- CPYB-1DR
- CPYB-1DT
- CPYB-1E
- CPYB-1EB
- CPYB-1EC
- CPYB-1EG
- CPYB-1ER
- CPYB-1ET
ClearTrống
Shape (Tip shape)
- No processing
- C
- G
- T
- R
- B
ClearTrống
CADCAD
- 2D
- 3D
ClearTrống

Days to ShipSố ngày giao hàng

Alltất cả các

5 Day(s) or Less

6 Day(s) or Less
ClearTrống

Specify AlterationsChỉ định thay đổi

One-Step Core Pins -Shaft Diameter (P) Designation (0.01mm Increments) Type-

Click this image to zoom it.Nhấp vào hình ảnh này để phóng to.

Move the mouse over or click the image to zoom

Change

Brand :

MISUMI

Part Number :

CPAB-1A1-[12-100/0.01]-P[0.8-0.99/0.01]-F[10-98.9/0.01]-V[0.5-0.98/0.01]

CPAB-1A1-[12-100/0.01]-P[0.8-0.99/0.01]-F[10-98.9/0.01]-VC[0.4-0.49/0.01]

CPAB-1A1.5-[12-100/0.01]-P[1-1.49/0.01]-F[10-98.9/0.01]-V[0.5-1.48/0.01]

CPAB-1A1.5-[12-100/0.01]-P[1-1.49/0.01]-F[10-98.9/0.01]-VC[0.4-0.49/0.01]

CPAB-1A2-[12-100/0.01]-P[1.5-1.99/0.01]-F[10-98.9/0.01]-V[0.5-1.98/0.01]

CPAB-1A2.5-[12-100/0.01]-P[2-2.49/0.01]-F[10-98.9/0.01]-V[0.5-2.48/0.01]

CPAB-1B1-[12-100/0.01]-P[0.8-0.99/0.01]-F[10-99.3/0.01]-A[0.4-0.98/0.01]-V[0.5-1.48/0.01]

CPAB-1B1-[12-100/0.01]-P[0.8-0.99/0.01]-F[10-99.3/0.01]-A[0.4-0.98/0.01]-VC[0.4-0.49/0.01]

CPAB-1B1.5-[12-100/0.01]-P[1-1.49/0.01]-F[10-98.9/0.01]-A[0.4-1.48/0.01]-V[0.5-1.48/0.01]

CPAB-1B1.5-[12-100/0.01]-P[1-1.49/0.01]-F[10-98.9/0.01]-A[0.4-1.48/0.01]-VC[0.4-0.49/0.01]

CPAB-1B2-[12-100/0.01]-P[1.5-1.99/0.01]-F[10-98.9/0.01]-A[0.5-1.98/0.01]-V[0.5-1.98/0.01]

CPAB-1B2.5-[12-100/0.01]-P[2-2.49/0.01]-F[10-98.9/0.01]-A[0.5-2.48/0.01]-V[0.5-2.48/0.01]

CPAB-1C1-[12-100/0.01]-P[0.8-0.99/0.01]-F[10-99.3/0.01]-A[0.4-0.98/0.01]-V[0.5-0.98/0.01]

CPAB-1C1-[12-100/0.01]-P[0.8-0.99/0.01]-F[10-99.3/0.01]-A[0.4-0.98/0.01]-VC[0.4-0.49/0.01]

CPAB-1C1.5-[12-100/0.01]-P[1-1.49/0.01]-F[10-98.9/0.01]-A[0.4-1.48/0.01]-V[0.5-1.48/0.01]

CPAB-1C1.5-[12-100/0.01]-P[1-1.49/0.01]-F[10-98.9/0.01]-A[0.4-1.48/0.01]-VC[0.4-0.49/0.01]

CPAB-1C2-[12-100/0.01]-P[1.5-1.99/0.01]-F[10-98.9/0.01]-A[0.5-1.98/0.01]-V[0.5-1.98/0.01]

CPAB-1C2.5-[12-100/0.01]-P[2-2.49/0.01]-F[10-98.9/0.01]-A[0.5-2.48/0.01]-V[0.5-2.48/0.01]

CPAB-1D1-[12-100/0.01]-P[0.8-0.99/0.01]-F[10-99.4/0.01]-A[0.4-0.98/0.01]-V[0.5-0.98/0.01]-C[0.1-4/0.1]

CPAB-1D1-[12-100/0.01]-P[0.8-0.99/0.01]-F[10-99.4/0.01]-A[0.4-0.98/0.01]-V[0.5-0.98/0.01]-CVC[0.5-1/0.01]

CPAB-1A1-[12-100/0.01]-P[0.8-0.99/0.01]-F[10-98.9/0.01]-V[0.5-0.98/0.01]

Order Qty :
Price :

---
Total Price :

---
Days to ship :

---

Select part number to Order Now/ Add to Cart

CAD Download

Product Description

This is a single-stage core pin of the type specified with a shaft diameter (P) of 0.01mm.

Part Number

Incomplete part number.
Please use left hand selections to complete a part number.Incomplete part number.
Please use left hand selections to complete a part number.

Loading...Tải…

: 30; 45; 60

Part Number
CPAB-1A1-[12-100/0.01]-P[0.8-0.99/0.01]-F[10-98.9/0.01]-V[0.5-0.98/0.01]
CPAB-1A1-[12-100/0.01]-P[0.8-0.99/0.01]-F[10-98.9/0.01]-VC[0.4-0.49/0.01]
CPAB-1A1.5-[12-100/0.01]-P[1-1.49/0.01]-F[10-98.9/0.01]-V[0.5-1.48/0.01]
CPAB-1A1.5-[12-100/0.01]-P[1-1.49/0.01]-F[10-98.9/0.01]-VC[0.4-0.49/0.01]
CPAB-1A2-[12-100/0.01]-P[1.5-1.99/0.01]-F[10-98.9/0.01]-V[0.5-1.98/0.01]
CPAB-1A2.5-[12-100/0.01]-P[2-2.49/0.01]-F[10-98.9/0.01]-V[0.5-2.48/0.01]
CPAB-1B1-[12-100/0.01]-P[0.8-0.99/0.01]-F[10-99.3/0.01]-A[0.4-0.98/0.01]-V[0.5-1.48/0.01]
CPAB-1B1-[12-100/0.01]-P[0.8-0.99/0.01]-F[10-99.3/0.01]-A[0.4-0.98/0.01]-VC[0.4-0.49/0.01]
CPAB-1B1.5-[12-100/0.01]-P[1-1.49/0.01]-F[10-98.9/0.01]-A[0.4-1.48/0.01]-V[0.5-1.48/0.01]
CPAB-1B1.5-[12-100/0.01]-P[1-1.49/0.01]-F[10-98.9/0.01]-A[0.4-1.48/0.01]-VC[0.4-0.49/0.01]
CPAB-1B2-[12-100/0.01]-P[1.5-1.99/0.01]-F[10-98.9/0.01]-A[0.5-1.98/0.01]-V[0.5-1.98/0.01]
CPAB-1B2.5-[12-100/0.01]-P[2-2.49/0.01]-F[10-98.9/0.01]-A[0.5-2.48/0.01]-V[0.5-2.48/0.01]
CPAB-1C1-[12-100/0.01]-P[0.8-0.99/0.01]-F[10-99.3/0.01]-A[0.4-0.98/0.01]-V[0.5-0.98/0.01]
CPAB-1C1-[12-100/0.01]-P[0.8-0.99/0.01]-F[10-99.3/0.01]-A[0.4-0.98/0.01]-VC[0.4-0.49/0.01]
CPAB-1C1.5-[12-100/0.01]-P[1-1.49/0.01]-F[10-98.9/0.01]-A[0.4-1.48/0.01]-V[0.5-1.48/0.01]
CPAB-1C1.5-[12-100/0.01]-P[1-1.49/0.01]-F[10-98.9/0.01]-A[0.4-1.48/0.01]-VC[0.4-0.49/0.01]
CPAB-1C2-[12-100/0.01]-P[1.5-1.99/0.01]-F[10-98.9/0.01]-A[0.5-1.98/0.01]-V[0.5-1.98/0.01]
CPAB-1C2.5-[12-100/0.01]-P[2-2.49/0.01]-F[10-98.9/0.01]-A[0.5-2.48/0.01]-V[0.5-2.48/0.01]
CPAB-1D1-[12-100/0.01]-P[0.8-0.99/0.01]-F[10-99.4/0.01]-A[0.4-0.98/0.01]-V[0.5-0.98/0.01]-C[0.1-4/0.1]
CPAB-1D1-[12-100/0.01]-P[0.8-0.99/0.01]-F[10-99.4/0.01]-A[0.4-0.98/0.01]-V[0.5-0.98/0.01]-CVC[0.5-1/0.01]
CPAB-1D1-[12-100/0.01]-P[0.8-0.99/0.01]-F[10-99.4/0.01]-A[0.4-0.98/0.01]-VC[0.4-0.49/0.01]-C[0.1-4/0.1]
CPAB-1D1-[12-100/0.01]-P[0.8-0.99/0.01]-F[10-99.4/0.01]-A[0.4-0.98/0.01]-VC[0.4-0.49/0.01]-CVC[0.5-1/0.01]
CPAB-1D1.5-[12-100/0.01]-P[1-1.49/0.01]-F[10-98.9/0.01]-A[0.4-1.48/0.01]-V[0.5-1.48/0.01]-C[0.1-4/0.1]
CPAB-1D1.5-[12-100/0.01]-P[1-1.49/0.01]-F[10-98.9/0.01]-A[0.4-1.48/0.01]-V[0.5-1.48/0.01]-CVC[0.5-1/0.01]
CPAB-1D1.5-[12-100/0.01]-P[1-1.49/0.01]-F[10-98.9/0.01]-A[0.4-1.48/0.01]-VC[0.4-0.49/0.01]-C[0.1-4/0.1]
CPAB-1D1.5-[12-100/0.01]-P[1-1.49/0.01]-F[10-98.9/0.01]-A[0.4-1.48/0.01]-VC[0.4-0.49/0.01]-CVC[0.5-1/0.01]
CPAB-1D2-[12-100/0.01]-P[1.5-1.99/0.01]-F[10-98.9/0.01]-A[0.5-1.98/0.01]-V[0.5-1.98/0.01]-C[0.1-4/0.1]
CPAB-1D2-[12-100/0.01]-P[1.5-1.99/0.01]-F[10-98.9/0.01]-A[0.5-1.98/0.01]-V[0.5-1.98/0.01]-CVC[0.5-1/0.01]
CPAB-1D2.5-[12-100/0.01]-P[2-2.49/0.01]-F[10-98.9/0.01]-A[0.5-2.48/0.01]-V[0.5-2.48/0.01]-C[0.1-4/0.1]
CPAB-1D2.5-[12-100/0.01]-P[2-2.49/0.01]-F[10-98.9/0.01]-A[0.5-2.48/0.01]-V[0.5-2.48/0.01]-CVC[0.5-1/0.01]
CPAB-1E1-[12-100/0.01]-P[0.9-0.99/0.01]-F[10-99.5/0.01]-A[0.4-0.99/0.01]-V[0.5-0.99/0.01]-R[0.2-0.3/0.1]
CPAB-1E1-[12-100/0.01]-P[0.9-0.99/0.01]-F[10-99.5/0.01]-A[0.4-0.99/0.01]-V[0.5-0.99/0.01]-RE[0.5-2/0.5]
CPAB-1E1-[12-100/0.01]-P[0.9-0.99/0.01]-F[10-99.5/0.01]-A[0.4-0.99/0.01]-VC[0.4-0.49/0.01]-R[0.2-0.3/0.1]
CPAB-1E1-[12-100/0.01]-P[0.9-0.99/0.01]-F[10-99.5/0.01]-A[0.4-0.99/0.01]-VC[0.4-0.49/0.01]-RE[0.5-2/0.5]
CPAB-1E1.5-[12-100/0.01]-P[1-1.49/0.01]-F[10-98.9/0.01]-A[0.4-1.48/0.01]-V[0.5-1.48/0.01]-R[0.2-0.5/0.1]
CPAB-1E1.5-[12-100/0.01]-P[1-1.49/0.01]-F[10-98.9/0.01]-A[0.4-1.48/0.01]-V[0.5-1.48/0.01]-RE[0.5-2/0.5]
CPAB-1E1.5-[12-100/0.01]-P[1-1.49/0.01]-F[10-98.9/0.01]-A[0.4-1.48/0.01]-VC[0.4-0.49/0.01]-R[0.2-0.5/0.1]
CPAB-1E1.5-[12-100/0.01]-P[1-1.49/0.01]-F[10-98.9/0.01]-A[0.4-1.48/0.01]-VC[0.4-0.49/0.01]-RE[0.5-2/0.5]
CPAB-1E2-[12-100/0.01]-P[1.5-1.99/0.01]-F[10-98.9/0.01]-A[0.5-1.98/0.01]-V[0.5-1.98/0.01]-R[0.2-0.7/0.1]
CPAB-1E2-[12-100/0.01]-P[1.5-1.99/0.01]-F[10-98.9/0.01]-A[0.5-1.98/0.01]-V[0.5-1.98/0.01]-RE[0.5-2/0.5]
CPAB-1E2.5-[12-100/0.01]-P[2-2.49/0.01]-F[10-98.9/0.01]-A[0.5-2.48/0.01]-V[0.5-2.48/0.01]-R[0.2-1/0.1]
CPAB-1E2.5-[12-100/0.01]-P[2-2.49/0.01]-F[10-98.9/0.01]-A[0.5-2.48/0.01]-V[0.5-2.48/0.01]-RE[0.5-2/0.5]
CPDB-1A1-[12-100/0.01]-P[0.8-0.99/0.01]-F[10-98.9/0.01]-V[0.5-0.98/0.01]
CPDB-1A1-[12-100/0.01]-P[0.8-0.99/0.01]-F[10-98.9/0.01]-VC[0.4-0.49/0.01]
CPDB-1A1.5-[12-100/0.01]-P[1-1.49/0.01]-F[10-98.9/0.01]-V[0.5-1.48/0.01]
CPDB-1A1.5-[12-100/0.01]-P[1-1.49/0.01]-F[10-98.9/0.01]-VC[0.4-0.49/0.01]
CPDB-1A2-[12-100/0.01]-P[1.5-1.99/0.01]-F[10-98.9/0.01]-V[0.5-1.98/0.01]
CPDB-1A2.5-[12-100/0.01]-P[2-2.49/0.01]-F[10-98.9/0.01]-V[0.5-2.48/0.01]
CPDB-1A3-[12-100/0.01]-P[2.5-2.99/0.01]-F[10-98.9/0.01]-V[0.7-2.98/0.01]
CPDB-1A3.5-[12-120/0.01]-P[3-3.49/0.01]-F[10-119.5/0.01]-V[1-3.48/0.01]
CPDB-1A3.5-[12-120/0.01]-P[3-3.49/0.01]-F[10-119.5/0.01]-VC[0.7-0.99/0.01]
CPDB-1A4-[12-120/0.01]-P[3.5-3.99/0.01]-F[10-119.5/0.01]-V[1-3.98/0.01]
CPDB-1A4-[12-120/0.01]-P[3.5-3.99/0.01]-F[10-119.5/0.01]-VC[0.7-0.99/0.01]
CPDB-1A4.5-[12-120/0.01]-P[4-4.49/0.01]-F[10-119.5/0.01]-V[1-4.48/0.01]
CPDB-1A5-[12-120/0.01]-P[4.5-4.99/0.01]-F[10-119.5/0.01]-V[1-4.98/0.01]
CPDB-1A5.5-[12-120/0.01]-P[5-5.49/0.01]-F[10-119.5/0.01]-V[1.5-5.48/0.01]
CPDB-1A5.5-[12-120/0.01]-P[5-5.49/0.01]-F[10-119.5/0.01]-VC[1-1.49/0.01]
CPDB-1A6-[12-120/0.01]-P[5.5-5.99/0.01]-F[10-119.5/0.01]-V[2-5.98/0.01]
CPDB-1A6-[12-120/0.01]-P[5.5-5.99/0.01]-F[10-119.5/0.01]-VC[1.5-1.99/0.01]
CPDB-1A6.5-[12-120/0.01]-P[6-6.49/0.01]-F[10-119.5/0.01]-V[2-6.48/0.01]

Price	Minimum Order Qty.	Days to ShipSố ngày giao hàng	RoHS	Material	Shaft diameter tolerance	L dimension tolerance	Tip gradient tolerance	D/P (Shaft diameter) (mm)	Step (Step shape of the first step)	Shape (Tip shape)	No. (Nominal diameter) (mm)	RE (R shape alteration・enlargement) (mm)	A (Step shape diameter) (mm)	C (Step type taper width) (mm)	CVC (Designation of C dimension in increments of 0.01mm) (mm)	F (Bearing bore length) (mm)	G (Tip C chamfering width) (mm)	K (Tip angle) (°)	L (L dimension) (mm)	Q (Tip R chamfering) (mm)	R (Step type R) (mm)	S (Tip tapered width) (mm)	V (Tip diameter) (mm)	VC (V dimension alteration, smaller than V min) (mm)
-	1 Piece(s)	6 Day(s) or more	10	MAS1C	-0.01/-0.02	+0.02/0	±0.015	0.8 ～ 0.99	1A	No processing	1	-	-	-	-	10 ～ 98.9	-	-	12 ～ 100	-	-	-	0.5 ～ 0.98	-
-	1 Piece(s)	6 Day(s) or more	10	MAS1C	-0.01/-0.02	+0.02/0	±0.015	0.8 ～ 0.99	1A	No processing	1	-	-	-	-	10 ～ 98.9	-	-	12 ～ 100	-	-	-	-	0.4 ～ 0.49
-	1 Piece(s)	6 Day(s) or more	10	MAS1C	-0.01/-0.02	+0.02/0	±0.015	1 ～ 1.49	1A	No processing	1.5	-	-	-	-	10 ～ 98.9	-	-	12 ～ 100	-	-	-	0.5 ～ 1.48	-
-	1 Piece(s)	6 Day(s) or more	10	MAS1C	-0.01/-0.02	+0.02/0	±0.015	1 ～ 1.49	1A	No processing	1.5	-	-	-	-	10 ～ 98.9	-	-	12 ～ 100	-	-	-	-	0.4 ～ 0.49
-	1 Piece(s)	6 Day(s) or more	10	MAS1C	-0.01/-0.02	+0.02/0	±0.015	1.5 ～ 1.99	1A	No processing	2	-	-	-	-	10 ～ 98.9	-	-	12 ～ 100	-	-	-	0.5 ～ 1.98	-
-	1 Piece(s)	6 Day(s) or more	10	MAS1C	-0.01/-0.02	+0.02/0	±0.015	2 ～ 2.49	1A	No processing	2.5	-	-	-	-	10 ～ 98.9	-	-	12 ～ 100	-	-	-	0.5 ～ 2.48	-
-	1 Piece(s)	6 Day(s) or more	10	MAS1C	-0.01/-0.02	+0.02/0	±0.015	0.8 ～ 0.99	1B	No processing	1	-	0.4 ～ 0.98	-	-	10 ～ 99.3	-	-	12 ～ 100	-	-	-	0.5 ～ 1.48	-
-	1 Piece(s)	6 Day(s) or more	10	MAS1C	-0.01/-0.02	+0.02/0	±0.015	0.8 ～ 0.99	1B	No processing	1	-	0.4 ～ 0.98	-	-	10 ～ 99.3	-	-	12 ～ 100	-	-	-	-	0.4 ～ 0.49
-	1 Piece(s)	6 Day(s) or more	10	MAS1C	-0.01/-0.02	+0.02/0	±0.015	1 ～ 1.49	1B	No processing	1.5	-	0.4 ～ 1.48	-	-	10 ～ 98.9	-	-	12 ～ 100	-	-	-	0.5 ～ 1.48	-
-	1 Piece(s)	6 Day(s) or more	10	MAS1C	-0.01/-0.02	+0.02/0	±0.015	1 ～ 1.49	1B	No processing	1.5	-	0.4 ～ 1.48	-	-	10 ～ 98.9	-	-	12 ～ 100	-	-	-	-	0.4 ～ 0.49
-	1 Piece(s)	6 Day(s) or more	10	MAS1C	-0.01/-0.02	+0.02/0	±0.015	1.5 ～ 1.99	1B	No processing	2	-	0.5 ～ 1.98	-	-	10 ～ 98.9	-	-	12 ～ 100	-	-	-	0.5 ～ 1.98	-
-	1 Piece(s)	6 Day(s) or more	10	MAS1C	-0.01/-0.02	+0.02/0	±0.015	2 ～ 2.49	1B	No processing	2.5	-	0.5 ～ 2.48	-	-	10 ～ 98.9	-	-	12 ～ 100	-	-	-	0.5 ～ 2.48	-
-	1 Piece(s)	6 Day(s) or more	10	MAS1C	-0.01/-0.02	+0.02/0	±0.015	0.8 ～ 0.99	1C	No processing	1	-	0.4 ～ 0.98	-	-	10 ～ 99.3	-	-	12 ～ 100	-	-	-	0.5 ～ 0.98	-
-	1 Piece(s)	6 Day(s) or more	10	MAS1C	-0.01/-0.02	+0.02/0	±0.015	0.8 ～ 0.99	1C	No processing	1	-	0.4 ～ 0.98	-	-	10 ～ 99.3	-	-	12 ～ 100	-	-	-	-	0.4 ～ 0.49
-	1 Piece(s)	6 Day(s) or more	10	MAS1C	-0.01/-0.02	+0.02/0	±0.015	1 ～ 1.49	1C	No processing	1.5	-	0.4 ～ 1.48	-	-	10 ～ 98.9	-	-	12 ～ 100	-	-	-	0.5 ～ 1.48	-
-	1 Piece(s)	6 Day(s) or more	10	MAS1C	-0.01/-0.02	+0.02/0	±0.015	1 ～ 1.49	1C	No processing	1.5	-	0.4 ～ 1.48	-	-	10 ～ 98.9	-	-	12 ～ 100	-	-	-	-	0.4 ～ 0.49
-	1 Piece(s)	6 Day(s) or more	10	MAS1C	-0.01/-0.02	+0.02/0	±0.015	1.5 ～ 1.99	1C	No processing	2	-	0.5 ～ 1.98	-	-	10 ～ 98.9	-	-	12 ～ 100	-	-	-	0.5 ～ 1.98	-
-	1 Piece(s)	6 Day(s) or more	10	MAS1C	-0.01/-0.02	+0.02/0	±0.015	2 ～ 2.49	1C	No processing	2.5	-	0.5 ～ 2.48	-	-	10 ～ 98.9	-	-	12 ～ 100	-	-	-	0.5 ～ 2.48	-
-	1 Piece(s)	6 Day(s) or more	10	MAS1C	-0.01/-0.02	+0.02/0	±0.015	0.8 ～ 0.99	1D	No processing	1	-	0.4 ～ 0.98	0.1 ～ 4	-	10 ～ 99.4	-	-	12 ～ 100	-	-	-	0.5 ～ 0.98	-
-	1 Piece(s)	6 Day(s) or more	10	MAS1C	-0.01/-0.02	+0.02/0	±0.015	0.8 ～ 0.99	1D	No processing	1	-	0.4 ～ 0.98	-	0.5 ～ 1	10 ～ 99.4	-	-	12 ～ 100	-	-	-	0.5 ～ 0.98	-
-	1 Piece(s)	6 Day(s) or more	10	MAS1C	-0.01/-0.02	+0.02/0	±0.015	0.8 ～ 0.99	1D	No processing	1	-	0.4 ～ 0.98	0.1 ～ 4	-	10 ～ 99.4	-	-	12 ～ 100	-	-	-	-	0.4 ～ 0.49
-	1 Piece(s)	6 Day(s) or more	10	MAS1C	-0.01/-0.02	+0.02/0	±0.015	0.8 ～ 0.99	1D	No processing	1	-	0.4 ～ 0.98	-	0.5 ～ 1	10 ～ 99.4	-	-	12 ～ 100	-	-	-	-	0.4 ～ 0.49
-	1 Piece(s)	6 Day(s) or more	10	MAS1C	-0.01/-0.02	+0.02/0	±0.015	1 ～ 1.49	1D	No processing	1.5	-	0.4 ～ 1.48	0.1 ～ 4	-	10 ～ 98.9	-	-	12 ～ 100	-	-	-	0.5 ～ 1.48	-
-	1 Piece(s)	6 Day(s) or more	10	MAS1C	-0.01/-0.02	+0.02/0	±0.015	1 ～ 1.49	1D	No processing	1.5	-	0.4 ～ 1.48	-	0.5 ～ 1	10 ～ 98.9	-	-	12 ～ 100	-	-	-	0.5 ～ 1.48	-
-	1 Piece(s)	6 Day(s) or more	10	MAS1C	-0.01/-0.02	+0.02/0	±0.015	1 ～ 1.49	1D	No processing	1.5	-	0.4 ～ 1.48	0.1 ～ 4	-	10 ～ 98.9	-	-	12 ～ 100	-	-	-	-	0.4 ～ 0.49
-	1 Piece(s)	6 Day(s) or more	10	MAS1C	-0.01/-0.02	+0.02/0	±0.015	1 ～ 1.49	1D	No processing	1.5	-	0.4 ～ 1.48	-	0.5 ～ 1	10 ～ 98.9	-	-	12 ～ 100	-	-	-	-	0.4 ～ 0.49
-	1 Piece(s)	6 Day(s) or more	10	MAS1C	-0.01/-0.02	+0.02/0	±0.015	1.5 ～ 1.99	1D	No processing	2	-	0.5 ～ 1.98	0.1 ～ 4	-	10 ～ 98.9	-	-	12 ～ 100	-	-	-	0.5 ～ 1.98	-
-	1 Piece(s)	6 Day(s) or more	10	MAS1C	-0.01/-0.02	+0.02/0	±0.015	1.5 ～ 1.99	1D	No processing	2	-	0.5 ～ 1.98	-	0.5 ～ 1	10 ～ 98.9	-	-	12 ～ 100	-	-	-	0.5 ～ 1.98	-
-	1 Piece(s)	6 Day(s) or more	10	MAS1C	-0.01/-0.02	+0.02/0	±0.015	2 ～ 2.49	1D	No processing	2.5	-	0.5 ～ 2.48	0.1 ～ 4	-	10 ～ 98.9	-	-	12 ～ 100	-	-	-	0.5 ～ 2.48	-
-	1 Piece(s)	6 Day(s) or more	10	MAS1C	-0.01/-0.02	+0.02/0	±0.015	2 ～ 2.49	1D	No processing	2.5	-	0.5 ～ 2.48	-	0.5 ～ 1	10 ～ 98.9	-	-	12 ～ 100	-	-	-	0.5 ～ 2.48	-
-	1 Piece(s)	6 Day(s) or more	10	MAS1C	-0.01/-0.02	+0.02/0	±0.015	0.9 ～ 0.99	1E	No processing	1	-	0.4 ～ 0.99	-	-	10 ～ 99.5	-	-	12 ～ 100	-	0.2 ～ 0.3	-	0.5 ～ 0.99	-
-	1 Piece(s)	6 Day(s) or more	10	MAS1C	-0.01/-0.02	+0.02/0	±0.015	0.9 ～ 0.99	1E	No processing	1	0.5 ～ 2	0.4 ～ 0.99	-	-	10 ～ 99.5	-	-	12 ～ 100	-	-	-	0.5 ～ 0.99	-
-	1 Piece(s)	6 Day(s) or more	10	MAS1C	-0.01/-0.02	+0.02/0	±0.015	0.9 ～ 0.99	1E	No processing	1	-	0.4 ～ 0.99	-	-	10 ～ 99.5	-	-	12 ～ 100	-	0.2 ～ 0.3	-	-	0.4 ～ 0.49
-	1 Piece(s)	6 Day(s) or more	10	MAS1C	-0.01/-0.02	+0.02/0	±0.015	0.9 ～ 0.99	1E	No processing	1	0.5 ～ 2	0.4 ～ 0.99	-	-	10 ～ 99.5	-	-	12 ～ 100	-	-	-	-	0.4 ～ 0.49
-	1 Piece(s)	6 Day(s) or more	10	MAS1C	-0.01/-0.02	+0.02/0	±0.015	1 ～ 1.49	1E	No processing	1.5	-	0.4 ～ 1.48	-	-	10 ～ 98.9	-	-	12 ～ 100	-	0.2 ～ 0.5	-	0.5 ～ 1.48	-
-	1 Piece(s)	6 Day(s) or more	10	MAS1C	-0.01/-0.02	+0.02/0	±0.015	1 ～ 1.49	1E	No processing	1.5	0.5 ～ 2	0.4 ～ 1.48	-	-	10 ～ 98.9	-	-	12 ～ 100	-	-	-	0.5 ～ 1.48	-
-	1 Piece(s)	6 Day(s) or more	10	MAS1C	-0.01/-0.02	+0.02/0	±0.015	1 ～ 1.49	1E	No processing	1.5	-	0.4 ～ 1.48	-	-	10 ～ 98.9	-	-	12 ～ 100	-	0.2 ～ 0.5	-	-	0.4 ～ 0.49
-	1 Piece(s)	6 Day(s) or more	10	MAS1C	-0.01/-0.02	+0.02/0	±0.015	1 ～ 1.49	1E	No processing	1.5	0.5 ～ 2	0.4 ～ 1.48	-	-	10 ～ 98.9	-	-	12 ～ 100	-	-	-	-	0.4 ～ 0.49
-	1 Piece(s)	6 Day(s) or more	10	MAS1C	-0.01/-0.02	+0.02/0	±0.015	1.5 ～ 1.99	1E	No processing	2	-	0.5 ～ 1.98	-	-	10 ～ 98.9	-	-	12 ～ 100	-	0.2 ～ 0.7	-	0.5 ～ 1.98	-
-	1 Piece(s)	6 Day(s) or more	10	MAS1C	-0.01/-0.02	+0.02/0	±0.015	1.5 ～ 1.99	1E	No processing	2	0.5 ～ 2	0.5 ～ 1.98	-	-	10 ～ 98.9	-	-	12 ～ 100	-	-	-	0.5 ～ 1.98	-
-	1 Piece(s)	6 Day(s) or more	10	MAS1C	-0.01/-0.02	+0.02/0	±0.015	2 ～ 2.49	1E	No processing	2.5	-	0.5 ～ 2.48	-	-	10 ～ 98.9	-	-	12 ～ 100	-	0.2 ～ 1	-	0.5 ～ 2.48	-
-	1 Piece(s)	6 Day(s) or more	10	MAS1C	-0.01/-0.02	+0.02/0	±0.015	2 ～ 2.49	1E	No processing	2.5	0.5 ～ 2	0.5 ～ 2.48	-	-	10 ～ 98.9	-	-	12 ～ 100	-	-	-	0.5 ～ 2.48	-
-	1 Piece(s)	5 Day(s) or more	10	SKD61	-0.01/-0.02	+0.02/0	±0.015	0.8 ～ 0.99	1A	No processing	1	-	-	-	-	10 ～ 98.9	-	-	12 ～ 100	-	-	-	0.5 ～ 0.98	-
-	1 Piece(s)	5 Day(s) or more	10	SKD61	-0.01/-0.02	+0.02/0	±0.015	0.8 ～ 0.99	1A	No processing	1	-	-	-	-	10 ～ 98.9	-	-	12 ～ 100	-	-	-	-	0.4 ～ 0.49
-	1 Piece(s)	5 Day(s) or more	10	SKD61	-0.01/-0.02	+0.02/0	±0.015	1 ～ 1.49	1A	No processing	1.5	-	-	-	-	10 ～ 98.9	-	-	12 ～ 100	-	-	-	0.5 ～ 1.48	-
-	1 Piece(s)	5 Day(s) or more	10	SKD61	-0.01/-0.02	+0.02/0	±0.015	1 ～ 1.49	1A	No processing	1.5	-	-	-	-	10 ～ 98.9	-	-	12 ～ 100	-	-	-	-	0.4 ～ 0.49
-	1 Piece(s)	5 Day(s) or more	10	SKD61	-0.01/-0.02	+0.02/0	±0.015	1.5 ～ 1.99	1A	No processing	2	-	-	-	-	10 ～ 98.9	-	-	12 ～ 100	-	-	-	0.5 ～ 1.98	-
-	1 Piece(s)	5 Day(s) or more	10	SKD61	-0.01/-0.02	+0.02/0	±0.015	2 ～ 2.49	1A	No processing	2.5	-	-	-	-	10 ～ 98.9	-	-	12 ～ 100	-	-	-	0.5 ～ 2.48	-
-	1 Piece(s)	5 Day(s) or more	10	SKD61	-0.01/-0.02	+0.02/0	±0.015	2.5 ～ 2.99	1A	No processing	3	-	-	-	-	10 ～ 98.9	-	-	12 ～ 100	-	-	-	0.7 ～ 2.98	-
-	1 Piece(s)	5 Day(s) or more	10	SKD61	-0.01/-0.02	+0.02/0	±0.015	3 ～ 3.49	1A	No processing	3.5	-	-	-	-	10 ～ 119.5	-	-	12 ～ 120	-	-	-	1 ～ 3.48	-
-	1 Piece(s)	5 Day(s) or more	10	SKD61	-0.01/-0.02	+0.02/0	±0.015	3 ～ 3.49	1A	No processing	3.5	-	-	-	-	10 ～ 119.5	-	-	12 ～ 120	-	-	-	-	0.7 ～ 0.99
-	1 Piece(s)	5 Day(s) or more	10	SKD61	-0.01/-0.02	+0.02/0	±0.015	3.5 ～ 3.99	1A	No processing	4	-	-	-	-	10 ～ 119.5	-	-	12 ～ 120	-	-	-	1 ～ 3.98	-
-	1 Piece(s)	5 Day(s) or more	10	SKD61	-0.01/-0.02	+0.02/0	±0.015	3.5 ～ 3.99	1A	No processing	4	-	-	-	-	10 ～ 119.5	-	-	12 ～ 120	-	-	-	-	0.7 ～ 0.99
-	1 Piece(s)	5 Day(s) or more	10	SKD61	-0.01/-0.02	+0.02/0	±0.015	4 ～ 4.49	1A	No processing	4.5	-	-	-	-	10 ～ 119.5	-	-	12 ～ 120	-	-	-	1 ～ 4.48	-
-	1 Piece(s)	5 Day(s) or more	10	SKD61	-0.01/-0.02	+0.02/0	±0.015	4.5 ～ 4.99	1A	No processing	5	-	-	-	-	10 ～ 119.5	-	-	12 ～ 120	-	-	-	1 ～ 4.98	-
-	1 Piece(s)	5 Day(s) or more	10	SKD61	-0.01/-0.02	+0.02/0	±0.015	5 ～ 5.49	1A	No processing	5.5	-	-	-	-	10 ～ 119.5	-	-	12 ～ 120	-	-	-	1.5 ～ 5.48	-
-	1 Piece(s)	5 Day(s) or more	10	SKD61	-0.01/-0.02	+0.02/0	±0.015	5 ～ 5.49	1A	No processing	5.5	-	-	-	-	10 ～ 119.5	-	-	12 ～ 120	-	-	-	-	1 ～ 1.49
-	1 Piece(s)	5 Day(s) or more	10	SKD61	-0.01/-0.02	+0.02/0	±0.015	5.5 ～ 5.99	1A	No processing	6	-	-	-	-	10 ～ 119.5	-	-	12 ～ 120	-	-	-	2 ～ 5.98	-
-	1 Piece(s)	5 Day(s) or more	10	SKD61	-0.01/-0.02	+0.02/0	±0.015	5.5 ～ 5.99	1A	No processing	6	-	-	-	-	10 ～ 119.5	-	-	12 ～ 120	-	-	-	-	1.5 ～ 1.99
-	1 Piece(s)	5 Day(s) or more	10	SKD61	-0.01/-0.02	+0.02/0	±0.015	6 ～ 6.49	1A	No processing	6.5	-	-	-	-	10 ～ 119.5	-	-	12 ～ 120	-	-	-	2 ～ 6.48	-

Loading...Tải…

Product TOP

Basic InformationThông tin cơ bản

Shape type	One-step	Surface treatment	No	Head thickness	4mm(T4)
Step (Step shape of the second step)	No second step

The specifications and dimensions of some parts may not be fully covered. For exact details, refer toCác thông số kỹ thuật và kích thước của mã sản phẩm có thể không được bao phủ đầy đủ. Để biết chi tiết chính xác, hãy tham khảo manufacturer catalogsdanh mục nhà sản xuất ..

Top of the page

About MISUMIVề Misumi

About this WebsiteVề trang Web này

Useful ToolsCác công cụ hữu ích

Customer ServiceDịch vụ chăm sóc khách hàng

MISUMI Contact Monday to Saturday: 8:00 am - 5:00 pm Order cut off time is 5:00 pm Thứ 2 đến Thứ 7: 8 giờ sáng đến 5 giờ chiều Hạn chót đặt hàng là 5 giờ chiều

Tel:Số điện thoại:0222-361-1555
Fax:Số Fax:0222-361-2555
InquiryYêu cầu

MISUMI APP

Install MISUMI APP

TALK

TALK ID : Misumi_vn

MISUMI Vietnam Company Limited, Legal Representative: Tomohiro Watanabe,
phone: 0222-361-1555, e-mail: cs@misumi.com.vn, Enterprise Code: 0107514576,
Date of Issuance: 22 July 2016, Place of Issuance: Bac Ninh, Business Certificate No. 6573041568-KD dated 27 September 2016 issued by the People's Committee of Bac Ninh

Công ty TNHH MISUMI Việt Nam, Đại diện theo pháp luật: Tomohiro Watanabe,
Điện thoại: 0222-361-1555, e-mail: cs@misumi.com.vn, Mã số doanh nghiệp: 0107514576,
ngày cấp 22/7/2016, nơi cấp: Bắc Ninh, Giấy phép kinh doanh số: 6573041568-KD ngày cấp 27/9/2016 bởi UBND tỉnh Bắc Ninh

ものづくりの、明日を支える。MISUMI-VONA 生産材コマース ものづくりの、明日を支える。MISUMI-VONA 生産材コマース

Search by Category / Brand Tìm theo danh mục, nhãn hiệu

Search by Category Tìm theo danh mục

How can we improve?

ConfigureTạo

Specification/DimensionsĐặc điểm kỹ thuật / Kích thướcĐặc điểm kỹ thuật / Kích thước

Material

Shaft diameter tolerance

L dimension tolerance

Tip gradient tolerance

D/P (Shaft diameter)(mm)

Step (Step shape of the first step)

No. (Nominal diameter)(mm)

RE (R shape alteration・enlargement)(mm)

A (Step shape diameter)(mm)

C (Step type taper width)(mm)

CVC (Designation of C dimension in increments of 0.01mm)(mm)

F (Bearing bore length)(mm)

G (Tip C chamfering width)(mm)

K (Tip angle)(°)

L (L dimension)(mm)

Q (Tip R chamfering)(mm)

R (Step type R)(mm)

S (Tip tapered width)(mm)

V (Tip diameter)(mm)

VC (V dimension alteration, smaller than V min)(mm)

type

Shape (Tip shape)

CADCAD

Days to ShipSố ngày giao hàng

Specify AlterationsChỉ định thay đổi

One-Step Core Pins -Shaft Diameter (P) Designation (0.01mm Increments) Type-

Copy Part Number URL to Clipboard

Product Description

Part Number

Basic InformationThông tin cơ bản

About MISUMIVề Misumi

About this WebsiteVề trang Web này

Useful ToolsCác công cụ hữu ích

Customer ServiceDịch vụ chăm sóc khách hàng

MISUMI Contact Monday to Saturday: 8:00 am - 5:00 pm Order cut off time is 5:00 pm Thứ 2 đến Thứ 7: 8 giờ sáng đến 5 giờ chiều Hạn chót đặt hàng là 5 giờ chiều

ものづくりの、明日を支える。MISUMI-VONA 生産材コマースものづくりの、明日を支える。MISUMI-VONA 生産材コマース