Clamp Levers/Threaded

MISUMI

[Features]·One of the most versatile clamp lever. [Clamp Type]Clamping mechanism, "Operating direction" horizontal

• Volume Discount

CAD ：

2D / 3D

Miniature Clamp Levers/Threaded

MISUMI

[Features]·A miniature clamp lever with a short lever.

• Volume Discount

CAD ：

2D / 3D

Clamp Lever (FKF, FKR)

IMAO CORPORATION

Machine lever for tightening and loosening screws without tools.[Features]・ In this type of lever handle, when the lever is pulled, the serrations engaged with each other are disengaged.・ After tightening, you can turn the lever freely to any position.・ Can be used in tight places where a lever cannot be turned 360°. ・ After screw tightening, the lever can be moved to an arbitrary position.・ Main unit available in 4 colors (silver, black, red and orange).[Applications]・ For position-adjusting parts, such as slides and slotted holes, etc.

CAD ：

2D / 3D

Resin Clamp Levers/Straight Handle

MISUMI

[Features]·A general-purpose clamp lever. [Material]·Resin type

• Volume Discount

CAD ：

2D / 3D

Clamp Lever (KF, KR)

IMAO CORPORATION

In this type of lever handle, when the lever is pulled, the serrations engaged with each other are disengaged. The standard type that boasts steady popularity.

CAD ：

2D / 3D

Double Arm Clamp Levers

MISUMI

[Features]·A butterfly-shaped clamp lever. [Material]Available in stainless steel or steel.

• Volume Discount

CAD ：

2D / 3D

Miniature Resin Clamp Levers

MISUMI

·A miniature resin clamp lever. [Clamp Type]Clamping mechanism, "Operating direction" horizontal

• Volume Discount

CAD ：

2D / 3D

Ergostyle Adjustable Clamp Lever (EAL)

IMAO CORPORATION

Lever with curves coordinated design. Normally, the lever part is free, and when the lever is pushed down, the serration can be engaged and operated,which prevents incorrect handling after tightening.[Features]· Curved design of the entire lever part gives a comfortable grip feeling.· Initial tightening work can be done comfortably as the knurling is applied on the lower part of the mail body.· The standard color of the button is orange, however, black, gray, yellow, light blue, and red are also accepted as customized orders.· We accept additional work

CAD ：

2D / 3D

EALA Ergo Adjuster Clamp Lever (With Hex Socket Head)

IMAO CORPORATION

Lever with curves coordinated design. .Even though the lever part is free, when the lever is pushed down, the serrations can be engaged with each other, so it is possible to prevent contact malfunction after tightening.[Features]· Curved design of the entire lever part gives a comfortable grip feeling.· We accept additional work

CAD ：

2D / 3D

Clamp Levers/Threaded/with Washer

MISUMI

[Features]·It is a versatile type clamp lever with a built-in washer

• Volume Discount

CAD ：

2D / 3D

Flat Clamp Levers

MISUMI

[Features]·It can be used without interference when there is no upper space.

• Volume Discount

CAD ：

2D / 3D

Clamp Levers/with Pad/Radiused Tip

MISUMI

A padded tip SR clamp lever. [Material]Stainless steel / steel

CAD ：

2D / 3D

Cam Lever (KCL, KCLS, KCLF)

IMAO CORPORATION

Once screwed in proper position, clamping / unclamping can be done by lever up / down operation. Excellent rust prevention stainless steel type.

CAD ：

2D / 3D

Cam Lever

MISUMI

A quick lever. [Applications]Clamp "Clamp type" cam mechanism, "Operating direction" vertical

• Volume Discount

CAD ：

2D / 3D

Ratcheting Clamp Levers

MISUMI

Ratchet function allows you to easily change the direction of operation

• Volume Discount

CAD ：

2D / 3D

Clamping Lever_LDM/LDF/LDR

NABEYA BI-TECH

Zinc die-cast clamp lever.[Features]·A wide range of screw sizes from M3 to M16.·You can choose the thread material and surface treatment.·The lever part has a matte electrostatic coating that makes scratches less noticeable.·Four color variations are available for the lever. Selectable by the end symbol of the part number.[Applications]·For tightening after adjusting the workpiece position.·Ideal for applications that are frequently opened and closed.

CAD ：

2D / 3D

Plastic Clamp Lever_LUDM/LUDF

NABEYA BI-TECH

Double arm type plastic clamp lever.

CAD ：

2D / 3D

Resin Clamp Levers/Curved Handle

MISUMI

[Features]·A general-purpose clamp lever. [Material]·Resin type

• Volume Discount

CAD ：

2D / 3D

Safety Resin Clamp Levers

MISUMI

In the normal position, the lever is free, so even if you accidentally turn the lever, the clamp will not loosen.

• Volume Discount

CAD ：

2D / 3D

Locking Lever (LL)

IMAO CORPORATION

[Features]· Standard type lever handle that can be used widely.· For grip, PC type door knob is used

CAD ：

2D / 3D

Cam Lever (QLCL)

IMAO CORPORATION

[Features]· With its unique cam shape, click movement confirms the clamp completion.· Compared with conventional cams, this cam structure is less susceptible to detachment due to vibration, etc.· Since the screw part rotates in the male screw type, the direction of the lever can be adjusted arbitrarily.

Cam Lever (QLCA)

IMAO CORPORATION

[Features]· Since the screw part rotates in the male screw type, the direction of the lever can be adjusted arbitrarily.

CAD ：

2D / 3D

Cam Lever (ECL, ECLN)

IMAO CORPORATION

Resin type cam lever. With adjustment ring (with adjustment), the tightening force and the operating position of the lever can be adjusted arbitrarily.[Features]· Curved design of the entire lever part gives a comfortable grip feeling.· ECL type. By rotating the knurled adjustment ring, the tightening force and lever operating position can be adjusted arbitrarily.· Fine adjustment is possible without using tools

CAD ：

2D / 3D

Push Button Clamp Levers

MISUMI

[Features]·The serration can be easily released by pressing the screw head with your thumb

• Volume Discount

CAD ：

2D / 3D

Flat Tension Levers

MISUMI

[Features]·It is a general-purpose flat type tension lever.

• Volume Discount

CAD ：

2D / 3D

Mini Clamp Lever (MKF, MKR)

IMAO CORPORATION

In this type of lever handle, when the lever is pulled, the serrations engaged with each other are disengaged. Mini type with small turning radius.

CAD ：

2D / 3D

Ergonomic Control Lever (ECL)

IMAO CORPORATION

A gentle curve of the arm and polyamide lever handle give a gentle feel to the hands due to the hemispherical finish at the tip.[Features]· A gentle curve of the arm and a hemispherical finish of the tip gives a gentle hand grip, enabling a smooth and powerful operation.· The boss hole can be easily covered with the accessory cap after installation.· Pilot holes are processed.· ECL32 to 54 can be used in a snap system by installing the optional ball & spring.· A groove is provided in the boss for the stop pin that limits the lever operating angle to an angle of 125 ±1°

CAD ：

2D / 3D

Flat Tension Lever (FTF/FT)

IMAO CORPORATION

In this type, when the lever is pulled the serrations mesh and the lever becomes free. Since the height of the main body is low and the lever angle is also 0°, it is ideal to have no space above and below.[Features]· Since the height of the main body is low and the lever angle is also 0°, it is ideal to have no space above and below.· If interference of the lever occurs during operation, a short lever can be installed and used

CAD ：

2D / 3D

Flat Clamp Lever (HKF/HKR)

IMAO CORPORATION

[Product Information]· Mounting part type: male thread, female thread / turning radius R (mm): 65, 80 / Mounting part material: SUS303, SUM22L· Mounting surface treatment: none, tetra-iron oxide coating / Mounting part diameter (mm) or nominal diameter: M6 to M10· Mounting part length (mm): 15 to 60 / Lever color: Orange, black

CAD ：

2D / 3D

Y-Shaped Clamp Levers

MISUMI

A Y-shaped clamp lever. [Specifications]·Operating direction: horizontal. ·Type of mounting section: male thread.

• Volume Discount

CAD ：

2D / 3D

Resin Clamp Levers/with Push Button

MISUMI

A push-type resin clamp lever. [Material]Stainless steel / steel

• Volume Discount

CAD ：

2D / 3D

Flat Tension Levers/With Hexagonal Socket Head/Threaded

MISUMI

A flat tension lever with a hex socket head. [Clamp Type]Clamp mechanism

• Volume Discount

CAD ：

2D / 3D

Tension Levers/Safety Tension Levers

MISUMI

A tension lever. [Applications]Clamp, "Clamp type" clamp mechanism, "Operating direction" horizontal

• Volume Discount

CAD ：

2D / 3D

Clamp Lever_LHM/LHF

NABEYA BI-TECH

Flat lever type. For use in places where upper space is limited.

CAD ：

2D / 3D

Control Lever (CL)

IMAO CORPORATION

By using the optional CLB, you can also use the snap method with this lever handle.[Features]· The boss hole can be easily covered with the center plate accessory after installation.· Optional ball & spring can be installed, and snap method can be used.· In order to limit the lever operating angle to 125 ±1°,the groove for the snap pin is provided in the boss.· For grip, PG type is used

CAD ：

2D / 3D

Safety Tension Lever (STF-N, ST-N)

IMAO CORPORATION

Normally, when the lever part is in the free state, pressing the lever pushes the serration into mesh and operation is possible. It is possible to prevent contact malfunction after tightening.[Features]· Large clamping force can be reached with lesser force since the thread diameter is thick and the lever is long.· Besides the door knob, all is made from stainless steel, so it is robust and strong.· In the push lock type, where the gear is used by pressing the lever, when the hand is released, the built-in spring allows the lever to return to its original position and rotate freely again, and it is safe from any incorrect handling

CAD ：

2D / 3D

Tension Lever (TLF-N/TL-N)

IMAO CORPORATION

In this type of lever handle, when the lever is pulled, the serrations engaged with each other are disengaged. Large clamping force can be obtained because the lever part is long.[Features]· Large clamping force can be reached with lesser force since the thread diameter is thick and the lever is long.· Besides the door knob, all parts are made from stainless steel, so it is robust and strong

CAD ：

2D / 3D

Clamp Lever (FKFT, FKRT)

IMAO CORPORATION

[Features]· When the lever is pulled, the serrations mesh and lever handle becomes free.· The upper part of the boss protrudes, and the lever lifting is easy.

CAD ：

2D / 3D

Plastic Clamping Lever VR, VF

KONISHI

Since the lever becomes free when it is lifted upwards and the serration inside the lever comes off, smooth tightening operation is possible by moving the lever to a position that is always easy to operate. Since the lever part is made from polyamide, the weight of the machine can be reduced.

CAD ：

2D

Clamp Lever, Imperial Thread KRIN, Millimeter Left Screw KRL

KONISHI

[Features]・ It is a lever used when fixing the positioning・ By lifting the lever up, the serrations inside the lever will come off. Since the lever is free, you can always move the lever to a position where it is easy to operate, which enables smoother tightening operation.・ The thread section is an imperial thread. Prepare left-hand thread of metric thread[Applications]・ For tightening and loosening jigs

CAD ：

2D

Male Thread Clamp Lever (Orange)

ESCO

[Features]·ESCO lever, male thread clamp lever (orange).

Clamp Nut Lever_LNN

NABEYA BI-TECH

Clamp nut lever for operation.[Features]·Shot blasted with S15C.·Available in 2 materials.·LNN: Made of steel.·LNNS: Made of stainless steel.[Applications]·operating lever.

CAD ：

2D / 3D

Platen Clamping Lever_LEM/LEF

NABEYA BI-TECH

Good design award received. Plastic made clamp lever.

CAD ：

2D / 3D

Latch Lever_LZY

NABEYA BI-TECH

Clamping lever using spiral latch. Tightening can be adjusted without any steps of moving up and down of lever.

CAD ：

2D / 3D

Tension Lever LTM/LTF

NABEYA BI-TECH

[Features]· High strength type of clamping lever.· Standardized steel and all stainless steel types.· We also manufacture products with customized specifications, such as the turning radius of the lever.· Material: finishing lever screw: S45C, tetra-iron oxide coating (black) LTM, LTF. SUS303: LTMS, LTFS. Grip (plastic pole PB): Phenol resin (black)

CAD ：

2D / 3D