(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.
Tel: 0222-361-1555
Email: cs@misumi.com.vn
8:00 - 17:00 (Mon - Sat)
Search by Category / Brand Tìm theo danh mục, nhãn hiệu
Search by Category Tìm theo danh mục
- Thể lệ và Giải thưởng cuộc thi "Thiết kế máy Tự động hóa 2025" do MISUMI Việt Nam tổ chức. Xem chi tiết.
- [Thông báo] Cập nhật địa chỉ kho tập kết hàng hóa tại khu vực miền Nam của MISUMI Việt Nam. Xem chi tiết.
[Announcement] Update on warehouse address in the Southern region of MISUIMI Vietnam. See more.
UNION TOOL Carbide Ball End Mills（Machining Application：Side）
Search by specifying the lower class categoryTìm kiếm bằng cách chỉ định danh mục lớp thấp hơn
Brand |
|
|---|---|
| CAD |
|
| Days to Ship |
|
18 itemsMặt hàng
- Sort By
-
You can add up to 6 items per a category to the compare list.
HM Coated 2-flute, Long Neck Ball HSLB
UNION TOOL
[Features]· Compared to conventional products, this model achieves higher machining efficiency, longer service life and higher quality machining of hard mold materials at 40 HRC or more.· New HARDMAX coating adopted to maintain film hardness while improving oxidation resistance· Provides stable processing for water-soluble/oil-based cutting oil, oil mist, and air blow· The machining dimension has been improved by improving the wear resistance and setting the rake angle of the ball tip to negative· The rake angle on the outer circumference side of the ball has been set to weak negative, securing sharpness, providing an excellent processed surface and preventing deflection
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 0.05 ～ 3 0.08 ～ 4.8 0.3 ～ 60 3 ～ 6 2 45 ～ 120 general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] / Copper[○] -0.005～0.005 ～ -0.002～0.002 Side For High Hardness (Silicon Group) Long-Neck Ball From: 520,716 VND Days to Ship: Số ngày giao hàng: Same day or more 
Same day or more
-
You can add up to 6 items per a category to the compare list.
UNION TOOL
[Features]· With optimized blade shape, outstanding surface roughness is achieved for finishing and excellent wear resistance for roughing.· New UTCOAT with improved hardness, toughness, lubricity and adhesion is used to increase the wear resistance and surface roughness.· Supports a wide range from copper and raw materials to 55 HRC.
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 0.1 ～ 6 0.3 ～ 18 - 4 ～ 12 2 50 ～ 110 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] / Copper[◎] -0.007～0.007 ～ -0.005～0.005 Side TiCN Ball From: 513,634 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
UNION TOOL
[Features]· Compared to conventional products, this model achieves higher machining efficiency, longer service life and higher quality machining of hard mold materials at 40 HRC or more.· New HARDMAX coating adopted to maintain film hardness while improving oxidation resistance· Provides stable processing for water-soluble/oil-based cutting oil, oil mist, and air blow· The machining dimension has been improved by improving the wear resistance and setting the rake angle of the ball tip to negative· The rake angle on the outer circumference side of the ball has been set to weak negative, securing sharpness, providing an excellent processed surface and preventing deflection
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 0.03 ～ 6 0.06 ～ 22 - 4 ～ 12 2 50 ～ 110 general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] / Copper[○] -0.007～0.007 ～ -0.002～0.002 Side For High Hardness (Silicon Group) Ball From: 513,634 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
HLB, HM Coat, 2-Flute Long Neck Ball End Mill
UNION TOOL
[Features]· Can even be used to cut 65 HRC high speed steel material, with outstanding heat resistance temperature and lubricity· Provides unprecedented long life and can be used for both dry and wet applications
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 0.4 ～ 3 0.64 ～ 4.8 3 ～ 30 4 ～ 6 2 45 ～ 80 general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] / Copper[◎] -0.002～0.002 Side For High Hardness (Silicon Group) Long-Neck Ball From: 546,486 VND Days to Ship: Số ngày giao hàng: 7 Day(s) or more
7 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
UT COAT 2-Flute Long-Neck Ball CSLEB
UNION TOOL
[Features]· With optimized blade shape, outstanding surface roughness is achieved for finishing and excellent wear resistance for roughing.· New UTCOAT with improved hardness, toughness, lubricity and adhesion is used to increase the wear resistance and surface roughness.· Supports a wide range from copper and raw materials to 55 HRC.
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 0.05 ～ 3 0.08 ～ 4.8 0.3 ～ 60 3 ～ 6 2 45 ～ 120 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] / Copper[◎] -0.005～0.005 ～ -0.002～0.002 Side TiCN Long-Neck Ball From: 520,716 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
![HFB, HM Coated, 4-Flute High Efficiency Ball End Mill [Alteration Supported Product]](//vn.misumi-ec.com/linked/material/fs/UNO1/PHOTO/223000439182.jpg?$product_view_b$)
HFB, HM Coated, 4-Flute High Efficiency Ball End Mill [Alteration Supported Product]
UNION TOOL
[Features]· Significantly enhances machining efficiency.· The chip discharge capacity is up to 27 times higher (compared to the manufacturer's previous product)· With the newly developed ball tip shape, the bottom surface is treated with non-polish processing· Reasonable price setting· Has 4 flutes but is still cheaper than 3-flute types from other companies
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 1 ～ 6 3 ～ 18 - 4 ～ 12 4 50 ～ 110 High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] -0.01～0.01 ～ -0.005～0.005 Side For High Hardness (Silicon Group) Ball From: 958,811 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
![HB, HM Coated, 2-Flute Ball End Mill [Alteration Supported Product]](//vn.misumi-ec.com/linked/material/fs/UNO1/PHOTO/223000439081.jpg?$product_view_b$)
HB, HM Coated, 2-Flute Ball End Mill [Alteration Supported Product]
UNION TOOL
[Features]· Compared to conventional products, this model achieves higher machining efficiency, longer service life and higher quality machining of hard mold materials at 40 HRC or more.· New HARDMAX coating adopted to maintain film hardness while improving oxidation resistance· Provides stable processing for water-soluble/oil-based cutting oil, oil mist, and air blow· The machining dimension has been improved by improving the wear resistance and setting the rake angle of the ball tip to negative· The rake angle on the outer circumference side of the ball has been set to weak negative, securing sharpness, providing an excellent processed surface and preventing deflection
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 0.1 ～ 0.75 0.3 ～ 2.5 - 4 2 50 general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] / Copper[◎] -0.005～0.005 Side For High Hardness (Silicon Group) Ball From: 563,011 VND Days to Ship: Số ngày giao hàng: 8 Day(s) or more
8 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
HBL, HM Coated 2-Flute Long Shank Ball
UNION TOOL
[Features]· Long Shank Ball End Middle Series Supporting High-Hardness Materials· Uses HardMax coating compatible with high-speed machining of high-hardness materials· Capable of stable, long-life machining for both dry and wet type
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 1.5 ～ 6 4.5 ～ 25 - 3 ～ 12 2 80 ～ 200 general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] / Copper[◎] -0.007～0.007 ～ -0.005～0.005 Side For High Hardness (Silicon Group) Ball From: 1,712,050 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
HFB, HM Coated 4-Flute High-Efficiency Short Shank Ball
UNION TOOL
[Features]· Supports Shrink Fit Holders· Suppresses unnecessary tool protrusion to enable higher precision processing· Reduces processes in cutting· Increases machining efficiency through combination with shrink fit holder.
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 1 ～ 6 3 ～ 18 - 4 ～ 12 4 40 ～ 60 High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] -0.01～0.01 ～ -0.005～0.005 Side For High Hardness (Silicon Group) Ball From: 958,811 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
HTNB HM coat 2-flute taper neck ball end mill
UNION TOOL
[Features]· High rigidity realized through an improved taper neck shape.· Adopts the HARDMAX coating that realizes outstanding heat resistance and lubricity· 65 HRC high hardness materials can also be cut
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 0.1 ～ 2 0.16 ～ 50 1.5 ～ 62 4 ～ 6 2 4 ～ 120 general steel[○] / Quenched and tempered steel[○/◎] / High Hardness Steel-HRC55[○/◎] / High Hardness Steel-HRC60[○/◎] / High Hardness Steel-HRC65[○/◎] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] / Copper[○/◎] -0.005～0.005 Side For High Hardness (Silicon Group) / For General Steels (AlCrN, etc.) Tapered neck ball From: 1,074,285 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
DIA Coated Series, for Graphite Processing, DCB, 2-Flute Ball
UNION TOOL
[Features]· 2-Flute Diamond-Coated Ball Series for Graphite Electrode Processing· The newly developed diamond coating film achieves outstanding wear resistance· Adopts a highly adhesive coating film for longer product life
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 0.5 ～ 6 5 ～ 55 - 4 ～ 12 2 60 ～ 180 Aluminum[○] / Copper[○] / Graphite[◎] / Resin[○] -0.01～0.01 Side Dia Coat Ball From: 2,234,340 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
DIA Coated Series, for Graphite Processing, DCLB, 2-Flute Long Neck Ball End Mill
UNION TOOL
[Features]· 2-Flute Diamond-Coated Ball Series for Graphite Electrode Processing· The newly developed diamond coating film achieves outstanding wear resistance· Adopts a highly adhesive coating film for longer product life
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 0.2 ～ 3 0.32 ～ 6 2 ～ 80 4 ～ 6 2 45 ～ 120 Aluminum[○] / Copper[○] / Graphite[◎] / Resin[○] -0.01～0.01 Side Dia Coat Long-Neck Ball From: 1,822,016 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
![CGB2000, for Graphite Processing, 2-Flute Ball [Alternation Supported Product]](//vn.misumi-ec.com/linked/material/fs/UNO1/PHOTO/223000439485.jpg?$product_view_b$)
CGB2000, for Graphite Processing, 2-Flute Ball [Alternation Supported Product]
UNION TOOL
[Features]· An end mill dedicated for graphite machining.· Adopts a carbide base material with excellent wear resistance.
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 0.2 ～ 6 0.8 ～ 55 - 4 ～ 12 2 60 ～ 200 Aluminum[○] / Copper[○] / Graphite[◎] / Resin[○] -0.01～0.01 Side Non-Coated Ball From: 1,547,002 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
CGB4000 4-Flute Ball for Graphite Processing
UNION TOOL
[Features]· An end mill dedicated for graphite machining.· Adopts a carbide base material with excellent wear resistance.
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 2 ～ 10 20 ～ 60 - 4 ～ 20 4 100 ～ 250 Aluminum[○] / Copper[○] / Graphite[◎] / Resin[○] -0.01～0.01 Side Non-Coated Ball From: 3,045,219 VND Days to Ship: Số ngày giao hàng: 7 Day(s) or more
7 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
CPRB 2-Flute Long Neck Ball End Mill for Resin Machining
UNION TOOL
[Features]· Long Neck Ball End Mill for Resin Processing· Ideal for deep grooving thanks to the undercut processing of the neck part
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 0.2 ～ 3 0.4 ～ 6 1 ～ 50 4 ～ 6 2 45 ～ 120 Aluminum[○] / Copper[◎] / Resin[◎] -0.01～0.01 Side Non-Coated Long-Neck Ball From: 876,385 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
![CFB, for Raw Wood to Machining, 3-Flute Ball [Alteration Supported Product]](//vn.misumi-ec.com/linked/material/fs/UNO1/PHOTO/223000439586.jpg?$product_view_b$)
CFB, for Raw Wood to Machining, 3-Flute Ball [Alteration Supported Product]
UNION TOOL
[Features]· 3-flute type achieves remarkably high feed. Shortens the roughing time· Deep cutting is possible, enabling high efficiency machining even with shape processing where feeding speed cannot be increased· Designed with 3-flute variable split to suppress chatter.· It uses UTCOAT and can support a wide range from raw materials through low/medium hardness materials up to 55 HRC· Provides excellent chip discharge performance and outstanding finished surface roughness with 3-groove tip shape (excluding R0.75 and below)
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 0.3 ～ 6 0.9 ～ 18 - 4 ～ 12 3 50 ～ 120 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[◎] / Titanium[◎] / Copper[◎] -0.01～0.01 ～ -0.005～0.005 Side TiCN Ball From: 891,729 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
UNION TOOL
[Features]· Ball-end mill for cemented carbide / hard brittle material machining· Diamond coating for cemented carbide machining realizes outstanding hardness, toughness and adhesive strength· Phenomenal "deep" cutting is enabled through adoption of an ideal blade shape.· Achieves tear-free, excellent machined surfaces, especially from medium rough to finish machining
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 0.1 ～ 3 0.14 ～ 4.2 - 4 ～ 6 2 50 ～ 60 - -0.01～0.01 Side Other Ball From: 5,780,362 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
CFLB, UT Coat 3-Flute Long Neck Ball End Mill
UNION TOOL
[Features]· Provides amazing high feed compared to the conventional 2-flute long neck ball.· With new UTCOAT, outstanding lubricity and long life are achieved.· Designed with 3-flute variable split to reduce chatter, enabling high precision die cutting.· Provides excellent chip discharge performance and outstanding finished surface roughness with 3-groove tip design (excluding R0.75 and below)· O.D. Tolerance: 0/-0.02
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 0.3 ～ 3 0.48 ～ 4.8 2 ～ 40 4 ～ 6 3 50 ～ 90 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[◎] / Titanium[◎] -0.007～0.007 ～ -0.005～0.005 Side TiCN Long-Neck Ball From: 902,746 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
![HFB, HM Coated, 4-Flute High Efficiency Ball End Mill [Alteration Supported Product]](http://vn.misumi-ec.com/linked/material/fs/UNO1/PHOTO/223000439182.jpg?$product_view_b$)
![HB, HM Coated, 2-Flute Ball End Mill [Alteration Supported Product]](http://vn.misumi-ec.com/linked/material/fs/UNO1/PHOTO/223000439081.jpg?$product_view_b$)
![CGB2000, for Graphite Processing, 2-Flute Ball [Alternation Supported Product]](http://vn.misumi-ec.com/linked/material/fs/UNO1/PHOTO/223000439485.jpg?$product_view_b$)
![CFB, for Raw Wood to Machining, 3-Flute Ball [Alteration Supported Product]](http://vn.misumi-ec.com/linked/material/fs/UNO1/PHOTO/223000439586.jpg?$product_view_b$)
| BrandNhãn hiệu |
|---|
| Product SeriesDòng sản phẩm |
| From |
| Days to ShipSố ngày giao hàng |
| R Size(mm) |
| Blade length (ℓ)(mm) |
| Underneck length (ℓ1)(mm) |
| Shank diameter (d)(mm) |
| Number of flutes(sheet) |
| Overall Length (L)(mm) |
| work material |
| R Precision(μm) |
| Machining Application |
| Coating |
| Type |
You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list. ![HFB, HM Coated, 4-Flute High Efficiency Ball End Mill [Alteration Supported Product]](http://vn.misumi-ec.com/linked/material/fs/UNO1/PHOTO/223000439182.jpg?$product_view_c$) | You can add up to 6 items per a category to the compare list. ![HB, HM Coated, 2-Flute Ball End Mill [Alteration Supported Product]](http://vn.misumi-ec.com/linked/material/fs/UNO1/PHOTO/223000439081.jpg?$product_view_c$) | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list. ![CGB2000, for Graphite Processing, 2-Flute Ball [Alternation Supported Product]](http://vn.misumi-ec.com/linked/material/fs/UNO1/PHOTO/223000439485.jpg?$product_view_c$) | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list. ![CFB, for Raw Wood to Machining, 3-Flute Ball [Alteration Supported Product]](http://vn.misumi-ec.com/linked/material/fs/UNO1/PHOTO/223000439586.jpg?$product_view_c$) | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | |
| BrandNhãn hiệu | UNION TOOL | UNION TOOL | UNION TOOL | UNION TOOL | UNION TOOL | UNION TOOL | UNION TOOL | UNION TOOL | UNION TOOL | UNION TOOL | UNION TOOL | UNION TOOL | UNION TOOL | UNION TOOL | UNION TOOL | UNION TOOL | UNION TOOL | UNION TOOL |
| Product SeriesDòng sản phẩm | HFB, HM Coated, 4-Flute High Efficiency Ball End Mill [Alteration Supported Product] | HB, HM Coated, 2-Flute Ball End Mill [Alteration Supported Product] | DIA Coated Series, for Graphite Processing, DCB, 2-Flute Ball | DIA Coated Series, for Graphite Processing, DCLB, 2-Flute Long Neck Ball End Mill | CGB2000, for Graphite Processing, 2-Flute Ball [Alternation Supported Product] | CFB, for Raw Wood to Machining, 3-Flute Ball [Alteration Supported Product] | ||||||||||||
| From | 520,716 VND- | 513,634 VND- | 513,634 VND- | 546,486 VND- | 520,716 VND- | 958,811 VND- | 563,011 VND- | 1,712,050 VND- | 958,811 VND- | 1,074,285 VND- | 2,234,340 VND- | 1,822,016 VND- | 1,547,002 VND- | 3,045,219 VND- | 876,385 VND- | 891,729 VND- | 5,780,362 VND- | 902,746 VND- |
| Days to ShipSố ngày giao hàng | Same day or more | 6 Day(s) or more | 6 Day(s) or more | 7 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 8 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 7 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more |
| R Size(mm) | 0.05 ～ 3 | 0.1 ～ 6 | 0.03 ～ 6 | 0.4 ～ 3 | 0.05 ～ 3 | 1 ～ 6 | 0.1 ～ 0.75 | 1.5 ～ 6 | 1 ～ 6 | 0.1 ～ 2 | 0.5 ～ 6 | 0.2 ～ 3 | 0.2 ～ 6 | 2 ～ 10 | 0.2 ～ 3 | 0.3 ～ 6 | 0.1 ～ 3 | 0.3 ～ 3 |
| Blade length (ℓ)(mm) | 0.08 ～ 4.8 | 0.3 ～ 18 | 0.06 ～ 22 | 0.64 ～ 4.8 | 0.08 ～ 4.8 | 3 ～ 18 | 0.3 ～ 2.5 | 4.5 ～ 25 | 3 ～ 18 | 0.16 ～ 50 | 5 ～ 55 | 0.32 ～ 6 | 0.8 ～ 55 | 20 ～ 60 | 0.4 ～ 6 | 0.9 ～ 18 | 0.14 ～ 4.2 | 0.48 ～ 4.8 |
| Underneck length (ℓ1)(mm) | 0.3 ～ 60 | - | - | 3 ～ 30 | 0.3 ～ 60 | - | - | - | - | 1.5 ～ 62 | - | 2 ～ 80 | - | - | 1 ～ 50 | - | - | 2 ～ 40 |
| Shank diameter (d)(mm) | 3 ～ 6 | 4 ～ 12 | 4 ～ 12 | 4 ～ 6 | 3 ～ 6 | 4 ～ 12 | 4 | 3 ～ 12 | 4 ～ 12 | 4 ～ 6 | 4 ～ 12 | 4 ～ 6 | 4 ～ 12 | 4 ～ 20 | 4 ～ 6 | 4 ～ 12 | 4 ～ 6 | 4 ～ 6 |
| Number of flutes(sheet) | 2 | 2 | 2 | 2 | 2 | 4 | 2 | 2 | 4 | 2 | 2 | 2 | 2 | 4 | 2 | 3 | 2 | 3 |
| Overall Length (L)(mm) | 45 ～ 120 | 50 ～ 110 | 50 ～ 110 | 45 ～ 80 | 45 ～ 120 | 50 ～ 110 | 50 | 80 ～ 200 | 40 ～ 60 | 4 ～ 120 | 60 ～ 180 | 45 ～ 120 | 60 ～ 200 | 100 ～ 250 | 45 ～ 120 | 50 ～ 120 | 50 ～ 60 | 50 ～ 90 |
| work material | general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] / Copper[◎] | general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] / Copper[○] | general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] / Copper[◎] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] / Copper[◎] | High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] | general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] / Copper[◎] | general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] / Copper[◎] | High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] | general steel[○] / Quenched and tempered steel[○/◎] / High Hardness Steel-HRC55[○/◎] / High Hardness Steel-HRC60[○/◎] / High Hardness Steel-HRC65[○/◎] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] / Copper[○/◎] | Aluminum[○] / Copper[○] / Graphite[◎] / Resin[○] | Aluminum[○] / Copper[○] / Graphite[◎] / Resin[○] | Aluminum[○] / Copper[○] / Graphite[◎] / Resin[○] | Aluminum[○] / Copper[○] / Graphite[◎] / Resin[○] | Aluminum[○] / Copper[◎] / Resin[◎] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[◎] / Titanium[◎] / Copper[◎] | - | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[◎] / Titanium[◎] |
| R Precision(μm) | -0.005～0.005 ～ -0.002～0.002 | -0.007～0.007 ～ -0.005～0.005 | -0.007～0.007 ～ -0.002～0.002 | -0.002～0.002 | -0.005～0.005 ～ -0.002～0.002 | -0.01～0.01 ～ -0.005～0.005 | -0.005～0.005 | -0.007～0.007 ～ -0.005～0.005 | -0.01～0.01 ～ -0.005～0.005 | -0.005～0.005 | -0.01～0.01 | -0.01～0.01 | -0.01～0.01 | -0.01～0.01 | -0.01～0.01 | -0.01～0.01 ～ -0.005～0.005 | -0.01～0.01 | -0.007～0.007 ～ -0.005～0.005 |
| Machining Application | Side | Side | Side | Side | Side | Side | Side | Side | Side | Side | Side | Side | Side | Side | Side | Side | Side | Side |
| Coating | For High Hardness (Silicon Group) | TiCN | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | TiCN | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) / For General Steels (AlCrN, etc.) | Dia Coat | Dia Coat | Non-Coated | Non-Coated | Non-Coated | TiCN | Other | TiCN |
| Type | Long-Neck Ball | Ball | Ball | Long-Neck Ball | Long-Neck Ball | Ball | Ball | Ball | Ball | Tapered neck ball | Ball | Long-Neck Ball | Ball | Ball | Long-Neck Ball | Ball | Ball | Long-Neck Ball |
Loading...Tải…
ConfigureTạo
Specification/DimensionsĐặc điểm kỹ thuật / Kích thướcĐặc điểm kỹ thuật / Kích thước
-
R Size(mm)
- 0.005
- 0.01
- 0.015
- 0.02
- 0.025
- 0.03
- 0.04
- 0.05
- R0.05
- 0.075
- R0.075
- R0.08
- 0.1
- R0.1
- 0.125
- R0.125
- 0.15
- R0.15
- 0.175
- 0.2
- R0.2
- 0.225
- 0.25
- R0.25
- 0.275
- 0.3
- R0.3
- 0.325
- 0.35
- R0.35
- 0.375
- 0.4
- R0.4
- 0.425
- 0.45
- R0.45
- 0.475
- 0.5
- R0.5
- 0.55
- R0.55
- 0.6
- R0.6
- 0.65
- R0.65
- 0.7
- R0.7
- 0.75
- R0.75
- 0.8
- R0.8
- 0.85
- R0.85
- 0.9
- R0.9
- 0.95
- R0.95
- 1
- R1
- R1.0
- 1.05
- 1.1
- R1.1
- 1.15
- 1.2
- R1.2
- 1.25
- R1.25
- 1.3
- R1.3
- 1.35
- 1.4
- R1.4
- 1.45
- 1.5
- R1.5
- 1.55
- 1.6
- R1.6
- 1.65
- 1.7
- R1.7
- 1.75
- R1.75
- 1.8
- R1.8
- 1.85
- 1.9
- R1.9
- 1.95
- 2
- R2
- R2.0
- 2.05
- 2.1
- R2.1
- 2.15
- 2.2
- R2.2
- 2.25
- R2.25
- 2.3
- R2.3
- 2.35
- R2.35
- 2.4
- R2.4
- 2.45
- 2.5
- R2.5
- 2.55
- 2.6
- R2.6
- 2.65
- 2.7
- R2.7
- 2.75
- R2.75
- 2.8
- R2.8
- 2.85
- 2.9
- R2.9
- 2.95
- 3
- R3
- R3.0
- R 3.0
- 3.05
- 3.1
- 3.15
- 3.175
- 3.2
- 3.25
- R3.25
- 3.3
- 3.35
- 3.4
- 3.45
- 3.5
- R3.5
- 3.55
- 3.6
- 3.65
- 3.7
- 3.75
- R3.75
- 3.8
- 3.85
- 3.9
- 3.95
- 4
- R4
- R4.0
- 4.05
- 4.1
- 4.15
- 4.2
- 4.25
- R4.25
- 4.3
- 4.35
- 4.4
- 4.45
- 4.5
- R4.5
- 4.55
- 4.6
- 4.65
- 4.7
- 4.75
- 4.8
- 4.85
- 4.9
- 4.95
- 5
- R5
- R5.0
- 5.05
- 5.1
- 5.15
- 5.2
- 5.25
- 5.3
- 5.35
- 5.4
- 5.45
- 5.5
- R5.5
- 5.55
- 5.6
- 5.65
- 5.7
- 5.75
- 5.8
- 5.85
- 5.9
- 5.95
- 6
- R6
- R6.0
- 6.05
- 6.1
- 6.15
- 6.2
- 6.25
- 6.3
- 6.35
- 6.4
- 6.45
- 6.5
- R6.5
- 6.55
- 6.6
- 6.65
- 6.7
- 6.75
- 6.8
- 6.85
- 6.9
- 6.95
- 7
- R7.0
- R7
- 7.05
- 7.1
- 7.15
- 7.2
- 7.25
- 7.3
- 7.35
- 7.4
- 7.45
- 7.5
- 7.55
- 7.6
- 7.65
- 7.7
- 7.75
- 7.8
- 7.85
- 7.9
- 7.95
- 8
- R8.0
- R8
- 8.05
- 8.1
- 8.15
- 8.2
- 8.25
- 8.3
- 8.35
- 8.4
- 8.45
- 8.5
- 8.55
- 8.6
- 8.65
- 8.7
- 8.75
- 8.8
- 8.85
- 8.9
- 8.95
- 9
- R9
- 9..5
- 9.05
- 9.1
- 9.15
- 9.2
- 9.25
- 9.3
- 9.35
- 9.4
- 9.45
- 9.5
- 9.55
- 9.6
- 9.65
- 9.7
- 9.75
- 9.8
- 9.85
- 9.9
- 9.95
- 10
- R10.0
- R10
- 10.25
- 10.5
- 10.75
- 11
- 11.5
- 12
- 12.25
- 12.5
- 12.75
- 13
- 13.5
- 14
- 14.5
- 15
- 15.5
- 16
- 16.5
- 17
- 17.5
- 18
- 18.5
- 19
- 19.5
- 20
- 22.0
- 22.5
- 23.0
- 24.0
- 25
-
Blade length (ℓ)(mm)
-
0.01～0.96
- 0.01
- 0.02
- 0.03
- 0.04
- 0.05
- 0.06
- 0.07
- 0.08
- 0.1
- 0.12
- 0.14
- 0.15
- 0.16
- 0.2
- 0.21
- 0.23
- 0.24
- 0.25
- 0.28
- 0.3
- 0.32
- 0.35
- 0.38
- 0.4
- 0.42
- 0.45
- 0.48
- 0.49
- 0.5
- 0.56
- 0.6
- 0.63
- 0.64
- 0.65
- 0.7
- 0.72
- 0.75
- 0.76
- 0.8
- 0.84
- 0.9
- 0.95
- 0.96
-
1～1.9
- 1
- 1.05
- 1.1
- 1.12
- 1.2
- 1.25
- 1.26
- 1.28
- 1.3
- 1.4
- 1.44
- 1.45
- 1.5
- 1.6
- 1.7
- 1.75
- 1.8
- 1.9
-
2～2.9
- 2
- 2.1
- 2.2
- 2.25
- 2.3
- 2.4
- 2.5
- 2.6
- 2.7
- 2.75
- 2.8
- 2.9
-
3～3.9
- 3
- 3.2
- 3.25
- 3.5
- 3.6
- 3.7
- 3.75
- 3.8
- 3.85
- 3.9
-
4～4.9
- 4
- 4.1
- 4.2
- 4.25
- 4.4
- 4.5
- 4.7
- 4.75
- 4.8
- 4.9
-
5～5.9
- 5
- 5.1
- 5.2
- 5.3
- 5.4
- 5.5
- 5.6
- 5.7
- 5.8
- 5.9
-
6～6.9
- 6
- 6.2
- 6.25
- 6.3
- 6.5
- 6.6
- 6.7
- 6.8
- 6.9
-
7～7.5
- 7
- 7.1
- 7.2
- 7.4
- 7.5
-
8～8.9
- 8
- 8.1
- 8.2
- 8.3
- 8.4
- 8.5
- 8.6
- 8.7
- 8.9
-
9～9.7
- 9
- 9.5
- 9.7
-
10～10.5
- 10
- 10.5
-
11～11.5
- 11
- 11.2
- 11.5
-
12～12.7
- 12
- 12.5
- 12.7
-
13～13.5
- 13
- 13.5
-
14～14.5
- 14
- 14.5
-
15
-
16～16.5
- 16
- 16.5
-
17～17.5
- 17
- 17.5
-
18
-
19
-
20
-
21～21.5
- 21
- 21.5
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
32
-
34
-
35
-
36
-
38
-
40
-
45
-
48
-
50
-
55
-
58
-
60
-
63
-
65
-
70
-
80
-
90
-
100
-
110
-
120
-
130
-
-
Underneck length (ℓ1)(mm)
-
Shank diameter (d)(mm)
-
Number of flutes(sheet)
-
Overall Length (L)(mm)
-
work material
- general steel
- Quenched and tempered steel
- High Hardness Steel-HRC55
- High Hardness Steel-HRC60
- High Hardness Steel-HRC65
- Stainless Steel
- Cast Iron
- Aluminum
- Titanium
- Copper
- Graphite
- Resin
-
R Precision(μm)
-
Machining Application
-
Coating
- For High Hardness (Silicon Group)
- TiAlN
- For General Steels (AlCrN, etc.)
- TiCN
- DLC
- CrN
- Dia Coat
- Non-Coated
- MRC
- DG
- Other
- AlTiN
- BLUE
- TiSiN
- X-coating
- Y coating
- FX
- DIA
- A+
-
Type
- Ball
- Long-Neck Ball
- Tapered neck ball
- Spherical Ball
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy