MITUTOYO Dial Gauges（Application：Lever Type (Indicator)）

• You can add up to 6 items per a category to the compare list. Compare

  

  Dial Gauge, ABSOLUTE Digimatic Indicator ID-CX SERIES 543 - Standard Type

  MITUTOYO

  • The ABS (absolute) sensor restores the last origin position automaticallywhen the indicator is turned on.• Thanks to Mitutoyo's ABSOLUTE Linear Encoder, reliability has been increaseddue to elimination of over-speed errors.• Tolerance-judging measurement is available by setting upper and lower limit values.• Battery life of approx. 7,000 hours in continuous use has been achieved with onlyone battery.• Equipped with a data output port that enables incorporation into measurement networkingand statistical process control systems.

  Application	Scale interval minimal display(mm)	Display Method	Maximum Measurement Length (Range Selection)(mm)	Waterproof Function	Output terminal for measuring data: with or without	Scale type	Calibration Certificate
  Lever Type (Indicator)	0.01	Digital	-	NA	-	-	-

  From: 9,377,000 VND
  Days to Ship: Số ngày giao hàng: Quote

  Quote

• You can add up to 6 items per a category to the compare list. Compare

  

  ABSOLUTE Digimatic Indicator ID-SX SERIES 543

  MITUTOYO

  • Cost-effective oriented design ID-SX indicators use a button-type battery (SR44) and come with the minimum of functionality for ease of use. There is a choice of models in the lineup allowing selection of 0.01 mm, 0.001 mmor inch-based measurement resolutions. • IP53 dust/water protection level The models listed below also provide IP53 dust/water protection level specifications:543 794/94B/95/95B/96/96B • ABS (absolute) sensor These Digimatic indicators employ Mitutoyo’s proprietary ABS (absolute) sensor, which makes it possible to restore the origin point even if the power is turned off. This eliminates the need to performorigin restoration each time the power is turned on. Furthermore, this sensor ensures thatoverspeed errors do not occur, which improves reliability. • Long battery life One button battery (SR44) provides approximately 20,000 hours of continuous use for .0005”/0.01mm resolution models.

  Application	Scale interval minimal display(mm)	Display Method	Maximum Measurement Length (Range Selection)(mm)	Waterproof Function	Output terminal for measuring data: with or without	Scale type	Calibration Certificate
  Lever Type (Indicator)	-	Digital	-	-	-	-	-

  Days to Ship: Số ngày giao hàng: Quote

  Quote

• You can add up to 6 items per a category to the compare list. Compare

  

  Dial Gauge, Digimatic Indicator ID-H Series 543

  MITUTOYO

  • This new-generation digital indicator offers the excellent accuracy and functionalityexpected from the top class of indicator.• Take advantage of its high accuracy backed up by 0.5μm/.00002” resolution,remote control functionality via a handheld controller (or an RS-232C interface) and easy run out measurements with the well-established analog bar display.• Functionality meets the needs of diverse measurement applications.

  Application	Scale interval minimal display(mm)	Display Method	Maximum Measurement Length (Range Selection)(mm)	Waterproof Function	Output terminal for measuring data: with or without	Scale type	Calibration Certificate
  Lever Type (Indicator)	-	Digital	-	-	-	-	-

  From: 13,252,500 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Dial Gauge, ABSOLUTE Digimatic Indicator ID-CX Series 543 — Standard Type(Measuring Range: 0.5-2inch)

  MITUTOYO

  • The ABS (absolute) sensor restores the last origin position automatically when the indicator is turned on. • Thanks to Mitutoyo's ABSOLUTE Linear Encoder, reliability has been increased due to elimination ofover speed errors. • Tolerance-judging measurement is available by setting upper and lower limit values. • Battery life of approx. 7,000 hours in continuous use has been achieved with only one battery. • Equipped with a data output port that enables incorporation into measurement networking andstatistical process control systems.

  Application	Scale interval minimal display(mm)	Display Method	Maximum Measurement Length (Range Selection)(mm)	Waterproof Function	Output terminal for measuring data: with or without	Scale type	Calibration Certificate
  Lever Type (Indicator)	-	Digital	-	-	-	-	-

  Days to Ship: Số ngày giao hàng: 46 Day(s) or more

  46 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  ABSOLUTE Digimatic Indicator ID-F SERIES 543 — with Back-light LCD Screen

  MITUTOYO

  • GO/±NG judgment function: If a judgment result shows an out of tolerance condition, the display backlighting changes from green to red. • An analog bar indicator has been integrated to make upper/lower limit and turnover point reading more comfortable. • With Mitutoyo's ABSOLUTE Linear Encoder technology, once the measurement reference point has been set it will not be lost when the power is turned off. Also, reliability has been increased due to the elimination of over-speed errors. • Easy-to-read large LCD readout with the character height of 8.5mm. • External power supply type: battery change is not necessary. Power can also be supplied via the AC adapter supplied as a standard accessory. • The resolution can be switched between 0.001mm /0.01mm (or .001” /.0005” /.0001” /.00005”). • Equipped with a data output port that enables incorporation into measurement networking and statistical process control systems.

  Application	Scale interval minimal display(mm)	Display Method	Maximum Measurement Length (Range Selection)(mm)	Waterproof Function	Output terminal for measuring data: with or without	Scale type	Calibration Certificate
  Lever Type (Indicator)	-	Digital	-	-	-	-	-

  Days to Ship: Số ngày giao hàng: Quote

  Quote

• You can add up to 6 items per a category to the compare list. Compare

  

  ABSOLUTE Digimatic Indicator ID-C SERIES 543 — Bore Gage Type

  MITUTOYO

  • Dedicated to inside measurement with minimum-value Hold and tolerance judgement functions. • Measurement data memory function (9 measurement results can be stored) • Simple operation of many functions with five buttons and status icons. • Wide LCD and new analog bar graph are now standard on all models. • Sampling is performed fifty times per second for accurate detection of maximum and minimum values.

  Application	Scale interval minimal display(mm)	Display Method	Maximum Measurement Length (Range Selection)(mm)	Waterproof Function	Output terminal for measuring data: with or without	Scale type	Calibration Certificate
  Lever Type (Indicator)	-	Digital	-	-	-	-	-

  Days to Ship: Số ngày giao hàng: Quote

  Quote

• You can add up to 6 items per a category to the compare list. Compare

  

  ABSOLUTE Solar-Powered Digimatic Indicator ID-SS SERIES 543(Measuring Range: 0.5inch/12.7mm)

  MITUTOYO

  • Solar powered An environmentally friendly measuring instrument that does not require batteries, eliminatingthe hassle and cost of battery replacement. Can operate under minimum light conditionsof 40 lux—lower than the level in a warehouse. • Built-in recharger The large-capacity built-in reservoir capacitor allows you to use the indicatorfor long periods of time under light conditions below the minimum level.* • User-friendly buttons. All functions can be accessed by using the two or three large buttons on the front of the indicator. • Origin recorded even if display disappears. The indicator includes an ABS (absolute) sensorthat allows the previously set origin to be restored even if the display disappears due to insufficient light,making it easy to resume measurement. This feature makes ID-SS ideal for long-timeor multi-point measurement.

  Application	Scale interval minimal display(mm)	Display Method	Maximum Measurement Length (Range Selection)(mm)	Waterproof Function	Output terminal for measuring data: with or without	Scale type	Calibration Certificate
  Lever Type (Indicator)	-	Digital	-	-	-	-	-

  Days to Ship: Số ngày giao hàng: Quote

  Quote

• You can add up to 6 items per a category to the compare list. Compare

  

  SERIES 2 — Long Stroke Type(Measuring Range: 1-2inch)

  MITUTOYO

  • Long stroke dial indicators with a ø57mm outer frame. All the models are equipped with limit markersand a bezel clamp as standard. • An O-ring is employed to ensure air-tightness between the outer frame and the crystal case to prevent water or oil penetration. • Both the stem and the spindle are made of high-strength quench-hardened stainless steel suitablefor heavy-duty use. • A carbide contact point is employed. • The grand gear is made of stainless steel with high resistance to wear and deformation. • Application of a hard coating on the surface of the crystal makes the gauge highly scratch- andchemical-resistant. • The bezel clamp and lifting lever* (optional) can be attached to either the right or left side.These parts can be easily installed and removed without any tools. * Not available for waterproof type.

  Application	Scale interval minimal display(mm)	Display Method	Maximum Measurement Length (Range Selection)(mm)	Waterproof Function	Output terminal for measuring data: with or without	Scale type	Calibration Certificate
  Lever Type (Indicator)	-	Dial	-	-	-	-	-

  Days to Ship: Số ngày giao hàng: Quote

  Quote

• You can add up to 6 items per a category to the compare list. Compare

  

  ABSOLUTE Digimatic Indicator ID-C SERIES 543 — Signal Output Function Type

  MITUTOYO

  • Enables a tolerance judgment to be output to external equipment for a measurement result against userdefined limits. Solid-state switching provides high reliability by avoiding metallic switch contacts. • Output is enabled by directly connecting to external devices (sequencers, etc., for which a logical invert is available if required). The measurement and judgment results are displayed on the LCD. The judgment result is also indicated by 2 LEDs. • A peak-detection function is equipped for measuring and judging peak values, such as runout. • Measurements are absolute (ABS system) relative to an origin point*1 as set by the user, which holds indefinitely so does not require resetting at every power-on. • Provided with a 4m cable. • External power required is 5 - 24VDC. • Dust-water protection level: Conforms to IP54.

  Application	Scale interval minimal display(mm)	Display Method	Maximum Measurement Length (Range Selection)(mm)	Waterproof Function	Output terminal for measuring data: with or without	Scale type	Calibration Certificate
  Lever Type (Indicator)	-	Digital	-	-	-	-	-

  Days to Ship: Số ngày giao hàng: Quote

  Quote

• You can add up to 6 items per a category to the compare list. Compare

  

  ABSOLUTE Digimatic Indicator ID-C SERIES 543 — Calculation Type

  MITUTOYO

  • Calculation function operates on spindle displacement. • Entering the appropriate formula factors for a fixture dedicated to the application enables direct measurement readout, thereby eliminating any need for the conversion tables previously needed for those applications where fixtures are typically used. • Peak-Value Run-out/MAX/MIN Hold enables GO/±NG judgement for peak value. • Simple operation of many functions with five buttons and status icons. • Wide LCD and new analog bar graph are now standard on all models. • Sampling can be performed fifty times per second for accurate detection of maximum, minimum and run-out values.

  Application	Scale interval minimal display(mm)	Display Method	Maximum Measurement Length (Range Selection)(mm)	Waterproof Function	Output terminal for measuring data: with or without	Scale type	Calibration Certificate
  Lever Type (Indicator)	-	Digital	-	-	-	-	-

  Days to Ship: Số ngày giao hàng: 46 Day(s) or more

  46 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  ABSOLUTE Digimatic Indicator ID-C — Peak-Value Hold Type SERIES 543-30□

  MITUTOYO

  • Run-out/MAX/MIN Hold function enables GO/±NG judgement for peak or difference values. • Simple operation of many functions with five buttons and status icons. • Wide LCD and new analog bar graph are now standard on all models. • Sampling is performed fifty times per second for accurate detection of maximum and minimum values.

  Application	Scale interval minimal display(mm)	Display Method	Maximum Measurement Length (Range Selection)(mm)	Waterproof Function	Output terminal for measuring data: with or without	Scale type	Calibration Certificate
  Lever Type (Indicator)	-	Digital	-	-	-	-	-

  From: 10,510,000 VND
  Days to Ship: Số ngày giao hàng: 46 Day(s)

  46 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  ABSOLUTE Digimatic Indicator ID-N/B SERIES 543 — with Dust/ Water Protection Conforming to IP66(Measuring Range: 0.2-0.5inch)

  MITUTOYO

  • Our unique ABS sensor restores the last origin position automatically when the indicator is turned on. • The chance of overspeed errors has been eliminated thanks to the ABS sensor. • Rated to IP66: can be used satisfactorily even in adverse environments where the indicator is subject to splashing by cutting fluid or coolant. • Slim body design (body width: only 35mm) is advantageous in multipoint measurement situations where space is restricted. The LCD readout can also be rotated 180° to allow reading from the most convenient direction. • Succeeded in digitalization of the Back Plunger type widely used for dial indicators for ID-B. A 5mm-stroke plunger with a higher degree of accuracy has been implemented by adopting a direct reading scale for plunger displacement. • Built-in tolerance judgment function provides OK, +NG, or –NG judgment of measurement with respect to the preset upper and lower limit values, indicating the status of a measurement with the appropriate symbol. The symbols can be displayed much larger. • Equipped with a data output port that enables incorporation into measurement networking and statistical process control systems. • There is a choice of convenient Interface Input Tools which enable the conversion of measurement data to keyboard signals and directly input them to cells in off-the-shelf spreadsheet software such as Excel.

  Application	Scale interval minimal display(mm)	Display Method	Maximum Measurement Length (Range Selection)(mm)	Waterproof Function	Output terminal for measuring data: with or without	Scale type	Calibration Certificate
  Lever Type (Indicator)	-	Digital	-	-	-	-	-

  Days to Ship: Số ngày giao hàng: Quote

  Quote

BrandNhãn hiệu
Product SeriesDòng sản phẩm
From
Days to ShipSố ngày giao hàng
Application
Scale interval minimal display(mm)
Display Method
Maximum Measurement Length (Range Selection)(mm)
Waterproof Function
Output terminal for measuring data: with or without
Scale type
Calibration Certificate

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
BrandNhãn hiệu	MITUTOYO	MITUTOYO	MITUTOYO	MITUTOYO	MITUTOYO	MITUTOYO	MITUTOYO	MITUTOYO	MITUTOYO	MITUTOYO	MITUTOYO	MITUTOYO
Product SeriesDòng sản phẩm	Dial Gauge, ABSOLUTE Digimatic Indicator ID-CX SERIES 543 - Standard Type	ABSOLUTE Digimatic Indicator ID-SX SERIES 543	Dial Gauge, Digimatic Indicator ID-H Series 543	Dial Gauge, ABSOLUTE Digimatic Indicator ID-CX Series 543 — Standard Type(Measuring Range: 0.5-2inch)	ABSOLUTE Digimatic Indicator ID-F SERIES 543 — with Back-light LCD Screen	ABSOLUTE Digimatic Indicator ID-C SERIES 543 — Bore Gage Type	ABSOLUTE Solar-Powered Digimatic Indicator ID-SS SERIES 543(Measuring Range: 0.5inch/12.7mm)	SERIES 2 — Long Stroke Type(Measuring Range: 1-2inch)	ABSOLUTE Digimatic Indicator ID-C SERIES 543 — Signal Output Function Type	ABSOLUTE Digimatic Indicator ID-C SERIES 543 — Calculation Type	ABSOLUTE Digimatic Indicator ID-C — Peak-Value Hold Type SERIES 543-30□	ABSOLUTE Digimatic Indicator ID-N/B SERIES 543 — with Dust/ Water Protection Conforming to IP66(Measuring Range: 0.2-0.5inch)
From	9,377,000 VND	-	13,252,500 VND	-	-	-	-	-	-	-	10,510,000 VND	-
Days to ShipSố ngày giao hàng	Quote	Quote	9 Day(s)	46 Day(s) or more	Quote	Quote	Quote	Quote	Quote	46 Day(s) or more	46 Day(s)	Quote
Application	Lever Type (Indicator)	Lever Type (Indicator)	Lever Type (Indicator)	Lever Type (Indicator)	Lever Type (Indicator)	Lever Type (Indicator)	Lever Type (Indicator)	Lever Type (Indicator)	Lever Type (Indicator)	Lever Type (Indicator)	Lever Type (Indicator)	Lever Type (Indicator)
Scale interval minimal display(mm)	0.01	-	-	-	-	-	-	-	-	-	-	-
Display Method	Digital	Digital	Digital	Digital	Digital	Digital	Digital	Dial	Digital	Digital	Digital	Digital
Maximum Measurement Length (Range Selection)(mm)	-	-	-	-	-	-	-	-	-	-	-	-
Waterproof Function	NA	-	-	-	-	-	-	-	-	-	-	-
Output terminal for measuring data: with or without	-	-	-	-	-	-	-	-	-	-	-	-
Scale type	-	-	-	-	-	-	-	-	-	-	-	-
Calibration Certificate	-	-	-	-	-	-	-	-	-	-	-	-

Loading...Tải…