(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.
Tel: 0222-361-1555
Email: cs@misumi.com.vn
8:00 - 17:00 (Mon - Sat)
Search by Category / Brand Tìm theo danh mục, nhãn hiệu
Search by Category Tìm theo danh mục
- Thông báo ngừng cung cấp các sản phẩm khí nén của dòng Economy. Xem chi tiết.
Notice of Discontinuation of Pneumatics categories in Economy Series. See more.
KATAYAMA CHAIN Sprockets（Sprocket Shape：Shape B）
Brand |
|
|---|---|
| CAD |
|
| Days to Ship |
|
115 itemsMặt hàng
- Sort By
-
You can add up to 6 items per a category to the compare list.
Standard Sprocket 100B/C Type, Semi-F Series, Shaft Hole Machining Completed (New JIS Key)
KATAYAMA CHAIN
The semi-F series is a system for simple set up and rapid delivery of completed products with the desired machining (internal diameter, keyway, tap) of products with pilot holes completed.
Sprocket Shape Nominal Number Number of Teeth(T) Shaft Bore Dia. d(mm) Number of Strands Material Chain Type Type Shaft Type Surface Treatment Roller Type Shape B 100 9 ～ 65 21 ～ 103 1 Steel RS Shaft Bore Machined Type Shaft Bore Machining Configurable - - From: 1,173,091 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more 
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
KATAYAMA CHAIN
Shaft hole H7 tolerance, new JIS standard parallel key grade, metric coarse threaded sprocket for finished shaft hole.[Features]・ Carbon steel for mechanical structures・ Induction hardened tooth tip・ For standard chain 40・ New JIS keyway specifications[Applications]・ Motor, motor power transmission, wheel drive, conveyor, elevator, forklift lift
Sprocket Shape Nominal Number Number of Teeth(T) Shaft Bore Dia. d(mm) Number of Strands Material Chain Type Type Shaft Type Surface Treatment Roller Type Shape B 40 9 ～ 50 10 ～ 45 1 Steel RS Shaft Bore Machined Type Shaft Bore Machining Configurable Not Provided - From: 221,241 VND Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
Sprocket, Standard Sprocket, 60B Type
KATAYAMA CHAIN
[Features]·The one provided with keyway is also selectable. ·Chain No. 60. [Materials]·Steel.
Sprocket Shape Nominal Number Number of Teeth(T) Shaft Bore Dia. d(mm) Number of Strands Material Chain Type Type Shaft Type Surface Treatment Roller Type Shape B 60 8 ～ 90 12 ～ 26 1 Steel RS Pilot Hole Type Standard Pilot Bore - - From: 184,681 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
KATAYAMA CHAIN
FBN finished sprocket has shaft hole tolerance H7, standard grade parallel keys that satisfy JIS standards, metric coarse machining, and hex socket head screws already inserted.
Sprocket Shape Nominal Number Number of Teeth(T) Shaft Bore Dia. d(mm) Number of Strands Material Chain Type Type Shaft Type Surface Treatment Roller Type Shape B 60 9 ～ 45 18 ～ 55 1 Steel RS Shaft Bore Machined Type Shaft Bore Machining Configurable Not Provided - From: 365,756 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
KATAYAMA CHAIN
[Features]・ Standard sprocket made by induction hardening carbon steel・ It is selectable from a wide range of number of teeth and shaft hole diameter
Sprocket Shape Nominal Number Number of Teeth(T) Shaft Bore Dia. d(mm) Number of Strands Material Chain Type Type Shaft Type Surface Treatment Roller Type Shape B 40 8 ～ 90 9 ～ 20 1 Steel RS Pilot Hole Type Standard Pilot Bore - - From: 113,356 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
KATAYAMA CHAIN
FBN finished sprocket has shaft hole tolerance H7, standard grade parallel keys that satisfy JIS standards, metric coarse machining, and hex socket head screws already inserted.
Sprocket Shape Nominal Number Number of Teeth(T) Shaft Bore Dia. d(mm) Number of Strands Material Chain Type Type Shaft Type Surface Treatment Roller Type Shape B 35 9 ～ 40 10 ～ 38 1 Steel RS Shaft Bore Machined Type Shaft Bore Machining Configurable Not Provided - From: 187,875 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
KATAYAMA CHAIN
FBN finished sprocket has shaft hole tolerance H7, standard grade parallel keys that satisfy JIS standards, metric coarse machining, and hex socket head screws already inserted.
Sprocket Shape Nominal Number Number of Teeth(T) Shaft Bore Dia. d(mm) Number of Strands Material Chain Type Type Shaft Type Surface Treatment Roller Type Shape B 50 9 ～ 50 14 ～ 50 1 Steel RS Shaft Bore Machined Type Shaft Bore Machining Configurable Not Provided - From: 270,541 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
KATAYAMA CHAIN
[Features]·Compatible Chain: No. 50. ·Sprocket Shape: B type.
Sprocket Shape Nominal Number Number of Teeth(T) Shaft Bore Dia. d(mm) Number of Strands Material Chain Type Type Shaft Type Surface Treatment Roller Type Shape B 50 8 ～ 90 10 ～ 20 1 Steel RS Pilot Hole Type Standard Pilot Bore - - From: 142,740 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
SUSFBN35B Stainless Steel Finished Bore Sprocket
KATAYAMA CHAIN
FBN finished sprocket has shaft hole tolerance H7, standard grade parallel keys that satisfy JIS standards, metric coarse machining, and hex socket head screws already inserted.
Sprocket Shape Nominal Number Number of Teeth(T) Shaft Bore Dia. d(mm) Number of Strands Material Chain Type Type Shaft Type Surface Treatment Roller Type Shape B 35 10 ～ 40 10 ～ 30 1 Stainless Steel RS Shaft Bore Machined Type Shaft Bore Machining Configurable Not Provided - From: 489,275 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Standard Sprocket Model NK50-2B, Semi-F Series, Shaft Hole Machining Finish (New JIS Key)
KATAYAMA CHAIN
The semi-F series is a system for simple set up and rapid delivery of completed products with the desired machining (internal diameter, keyway, tap) of products with pilot holes completed.
Sprocket Shape Nominal Number Number of Teeth(T) Shaft Bore Dia. d(mm) Number of Strands Material Chain Type Type Shaft Type Surface Treatment Roller Type Shape B 50 10 ～ 70 14 ～ 80 2 Steel RS Shaft Bore Machined Type Shaft Bore Machining Configurable - - From: 1,016,158 VND Days to Ship: Số ngày giao hàng: 11 Day(s) or more
11 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Stainless steel sprocket type 80B semi F Series, shaft bore machined (new JIS key)
KATAYAMA CHAIN
The semi-F series is a system for simple set up and rapid delivery of completed products with the desired machining (internal diameter, keyway, tap) of products with pilot holes completed.
Sprocket Shape Nominal Number Number of Teeth(T) Shaft Bore Dia. d(mm) Number of Strands Material Chain Type Type Shaft Type Surface Treatment Roller Type Shape B 80 10 ～ 40 16 ～ 75 1 Stainless Steel RS Shaft Bore Machined Type Shaft Bore Machining Configurable Not Provided - From: 3,515,378 VND Days to Ship: Số ngày giao hàng: 11 Day(s) or more
11 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
SUSFBN40B Stainless Steel Finished Bore Sprocket
KATAYAMA CHAIN
[Features]· FBK finished sprocket has shaft hole tolerance H7, standard grade parallel keys that satisfy former JIS standards, metric coarse machining applied, and hex socket head screws already inserted.
Sprocket Shape Nominal Number Number of Teeth(T) Shaft Bore Dia. d(mm) Number of Strands Material Chain Type Type Shaft Type Surface Treatment Roller Type Shape B 40 10 ～ 40 12 ～ 30 1 Stainless Steel RS Shaft Bore Machined Type Shaft Bore Machining Configurable Not Provided - From: 623,340 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Standard Sprocket Model, Type 60B, Semi-F Series, Shaft Hole Machining Completed (New JIS Key)
KATAYAMA CHAIN
[Features]・ The semi-F Series is a system that makes the required shaft hole processing (inner diameter, keyway, tap) for the prepared hole product and delivers it as a finished product easily and quickly.
Sprocket Shape Nominal Number Number of Teeth(T) Shaft Bore Dia. d(mm) Number of Strands Material Chain Type Type Shaft Type Surface Treatment Roller Type Shape B 60 8 ～ 90 13 ～ 80 1 Steel RS Shaft Bore Machined Type Shaft Bore Machining Configurable - - From: 590,461 VND Days to Ship: Số ngày giao hàng: 11 Day(s) or more
11 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Standard Sprocket, NK100-2B Form, Semi F Series, Shaft Holes Already Established (New JIS Key)
KATAYAMA CHAIN
The semi-F series is a system for simple set up and rapid delivery of completed products with the desired machining (internal diameter, keyway, tap) of products with pilot holes completed.
Sprocket Shape Nominal Number Number of Teeth(T) Shaft Bore Dia. d(mm) Number of Strands Material Chain Type Type Shaft Type Surface Treatment Roller Type Shape B 100 10 ～ 54 24 ～ 103 2 Steel RS Shaft Bore Machined Type Shaft Bore Machining Configurable - - From: 2,904,545 VND Days to Ship: Số ngày giao hàng: 11 Day(s) or more
11 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Sprocket, Standard Sprocket, 80B Type
KATAYAMA CHAIN
[Features]·Compatible Chain: No. 80. ·Sprocket Shape: B type.
Sprocket Shape Nominal Number Number of Teeth(T) Shaft Bore Dia. d(mm) Number of Strands Material Chain Type Type Shaft Type Surface Treatment Roller Type Shape B 80 8 ～ 90 14 ～ 26 1 / 2 Steel RS Pilot Hole Type Standard Pilot Bore - - From: 332,081 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Standard Sprocket Model NK60-2B, Semi-F Series, Shaft Hole Machining Finish (New JIS Key)
KATAYAMA CHAIN
The semi-F series is a system for simple set up and rapid delivery of completed products with the desired machining (internal diameter, keyway, tap) of products with pilot holes completed.
Sprocket Shape Nominal Number Number of Teeth(T) Shaft Bore Dia. d(mm) Number of Strands Material Chain Type Type Shaft Type Surface Treatment Roller Type Shape B 60 10 ～ 70 14 ～ 89 2 Steel RS Shaft Bore Machined Type Shaft Bore Machining Configurable - - From: 1,129,886 VND Days to Ship: Số ngày giao hàng: 11 Day(s) or more
11 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
KATAYAMA CHAIN
FBN finished sprocket has shaft hole tolerance H7, standard grade parallel keys that satisfy JIS standards, metric coarse machining, and hex socket head screws already inserted.
Sprocket Shape Nominal Number Number of Teeth(T) Shaft Bore Dia. d(mm) Number of Strands Material Chain Type Type Shaft Type Surface Treatment Roller Type Shape B 80 9 ～ 30 24 ～ 60 1 Steel RS Shaft Bore Machined Type Shaft Bore Machining Configurable Not Provided - From: 575,805 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Standard 2052 Double Pitch Sprocket, R Roller B Type
KATAYAMA CHAIN
Rich lineup of variations in KANA standard sprocket count, number of teeth, and shape. The shaft holes of this product are not yet machined, so machining of shaft holes is required when using.
Sprocket Shape Nominal Number Number of Teeth(T) Shaft Bore Dia. d(mm) Number of Strands Material Chain Type Type Shaft Type Surface Treatment Roller Type Shape B C2052 7 ～ 30 20 ～ 26 1 Steel Double Pitch Pilot Hole Type Standard Pilot Bore Not Provided R Roller From: 424,186 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
KATAYAMA CHAIN
[Features]·Compatible Chain: No. 35. ·Sprocket Shape: B type.
Sprocket Shape Nominal Number Number of Teeth(T) Shaft Bore Dia. d(mm) Number of Strands Material Chain Type Type Shaft Type Surface Treatment Roller Type Shape B 35 8 ～ 80 8 ～ 16 1 Steel RS Pilot Hole Type Standard Pilot Bore - - From: 91,146 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
KATAYAMA CHAIN
FBK finished sprocket has shaft hole tolerance H7, standard grade parallel keys that satisfy previous JIS standards, metric coarse machining, and hex socket head screws already inserted.
Sprocket Shape Nominal Number Number of Teeth(T) Shaft Bore Dia. d(mm) Number of Strands Material Chain Type Type Shaft Type Surface Treatment Roller Type Shape B 60 10 ～ 26 20 ～ 50 1 Steel RS Shaft Bore Machined Type Shaft Bore Machining Configurable Not Provided - From: 441,929 VND Days to Ship: Số ngày giao hàng: 11 Day(s) or more
11 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Standard Sprocket, 160B - C Form, Semi F Series, Shaft Holes Already Established (New JIS Key)
KATAYAMA CHAIN
The semi-F series is a system for simple set up and rapid delivery of completed products with the desired machining (internal diameter, keyway, tap) of products with pilot holes completed.
Sprocket Shape Nominal Number Number of Teeth(T) Shaft Bore Dia. d(mm) Number of Strands Material Chain Type Type Shaft Type Surface Treatment Roller Type Shape B 160 10 ～ 35 27 ～ 118 1 Steel RS Shaft Bore Machined Type Shaft Bore Machining Configurable - - From: 3,985,530 VND Days to Ship: Số ngày giao hàng: 11 Day(s) or more
11 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
KATAYAMA CHAIN
Rich lineup of variations in KANA standard sprocket count, number of teeth, and shape. The shaft holes of this product are not yet machined, so machining of shaft holes is required when using.
Sprocket Shape Nominal Number Number of Teeth(T) Shaft Bore Dia. d(mm) Number of Strands Material Chain Type Type Shaft Type Surface Treatment Roller Type Shape B 25 10 ～ 80 6 ～ 12 1 Steel RS Pilot Hole Type Standard Pilot Bore Not Provided - From: 78,687 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Standard Sprocket Model, Type 40B, Semi-F Series, Shaft Hole Machining Completed (New JIS Key)
KATAYAMA CHAIN
The semi-F series is a system for simple set up and rapid delivery of completed products with the desired machining (internal diameter, keyway, tap) of products with pilot holes completed.
Sprocket Shape Nominal Number Number of Teeth(T) Shaft Bore Dia. d(mm) Number of Strands Material Chain Type Type Shaft Type Surface Treatment Roller Type Shape B 40 8 ～ 90 10 ～ 60 1 Steel RS Shaft Bore Machined Type Shaft Bore Machining Configurable - - From: 461,583 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
KATAYAMA CHAIN
The semi-F series is a system for simple set up and rapid delivery of completed products with the desired machining (internal diameter, keyway, tap) of products with pilot holes completed.
Sprocket Shape Nominal Number Number of Teeth(T) Shaft Bore Dia. d(mm) Number of Strands Material Chain Type Type Shaft Type Surface Treatment Roller Type Shape B C2062H 7 ～ 30 21 ～ 63 1 Steel Double Pitch Shaft Bore Machined Type Shaft Bore Machining Configurable Not Provided R Roller From: 1,312,738 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Sprocket, Standard Sprocket, 120B Type
KATAYAMA CHAIN
[Features]·The one provided with keyway is also selectable. ·Chain No. 120. [Materials]·Steel.
Sprocket Shape Nominal Number Number of Teeth(T) Shaft Bore Dia. d(mm) Number of Strands Material Chain Type Type Shaft Type Surface Treatment Roller Type Shape B 120 10 ～ 50 23 ～ 30 1 Steel RS Pilot Hole Type Standard Pilot Bore - - From: 1,216,676 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Standard 2042 Double Pitch Sprocket, R Roller B Type
KATAYAMA CHAIN
Rich lineup of variations in KANA standard sprocket count, number of teeth, and shape. The shaft holes of this product are not yet machined, so machining of shaft holes is required when using.
Sprocket Shape Nominal Number Number of Teeth(T) Shaft Bore Dia. d(mm) Number of Strands Material Chain Type Type Shaft Type Surface Treatment Roller Type Shape B C2042 7 ～ 32 14 ～ 26 1 Steel Double Pitch Pilot Hole Type Standard Pilot Bore Not Provided R Roller From: 283,381 VND Days to Ship: Số ngày giao hàng: 7 Day(s) or more
7 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Standard Sprocket NK35-2B, Shaft Hole Machined (New JIS Key)
KATAYAMA CHAIN
The semi-F series is a system for simple set up and rapid delivery of completed products with the desired machining (internal diameter, keyway, tap) of products with pilot holes completed.
Sprocket Shape Nominal Number Number of Teeth(T) Shaft Bore Dia. d(mm) Number of Strands Material Chain Type Type Shaft Type Surface Treatment Roller Type Shape B 35 10 ～ 60 11 ～ 63 2 Steel RS Shaft Bore Machined Type Shaft Bore Machining Configurable - - From: 829,566 VND Days to Ship: Số ngày giao hàng: 11 Day(s) or more
11 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Standard Sprocket Model NK40-2B, Semi-F Series, Shaft Hole Machining Finish (New JIS Key)
KATAYAMA CHAIN
The semi-F series is a system for simple set up and rapid delivery of completed products with the desired machining (internal diameter, keyway, tap) of products with pilot holes completed.
Sprocket Shape Nominal Number Number of Teeth(T) Shaft Bore Dia. d(mm) Number of Strands Material Chain Type Type Shaft Type Surface Treatment Roller Type Shape B 40 10 ～ 70 11 ～ 66 2 Steel RS Shaft Bore Machined Type Shaft Bore Machining Configurable - - From: 928,718 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
KATAYAMA CHAIN
The semi-F series is a system for simple set up and rapid delivery of completed products with the desired machining (internal diameter, keyway, tap) of products with pilot holes completed.
Sprocket Shape Nominal Number Number of Teeth(T) Shaft Bore Dia. d(mm) Number of Strands Material Chain Type Type Shaft Type Surface Treatment Roller Type Shape B C2042 7 ～ 32 15 ～ 55 1 Steel Double Pitch Shaft Bore Machined Type Shaft Bore Machining Configurable Not Provided R Roller From: 757,188 VND Days to Ship: Số ngày giao hàng: 11 Day(s) or more
11 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
KATAYAMA CHAIN
The semi-F series is a system for simple set up and rapid delivery of completed products with the desired machining (internal diameter, keyway, tap) of products with pilot holes completed.
Sprocket Shape Nominal Number Number of Teeth(T) Shaft Bore Dia. d(mm) Number of Strands Material Chain Type Type Shaft Type Surface Treatment Roller Type Shape B C2052 7 ～ 30 21 ～ 55 1 Steel Double Pitch Shaft Bore Machined Type Shaft Bore Machining Configurable Not Provided R Roller From: 951,601 VND Days to Ship: Số ngày giao hàng: 11 Day(s) or more
11 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
SUS Standard Stainless Steel 2052 Double Pitch Sprocket For R Roller B Type
KATAYAMA CHAIN
Rich lineup of variations in KANA standard sprocket count, number of teeth, and shape. The shaft holes of this product are not yet machined, so machining of shaft holes is required when using.
Sprocket Shape Nominal Number Number of Teeth(T) Shaft Bore Dia. d(mm) Number of Strands Material Chain Type Type Shaft Type Surface Treatment Roller Type Shape B C2052 10 ～ 13 20 1 Stainless Steel Double Pitch Pilot Hole Type Standard Pilot Bore Not Provided R Roller From: 1,906,995 VND Days to Ship: Số ngày giao hàng: 9 Day(s) or more
9 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Stainless steel sprocket type 80B
KATAYAMA CHAIN
Rich lineup of variations in KANA standard sprocket count, number of teeth, and shape. The shaft holes of this product are not yet machined, so machining of shaft holes is required when using.
Sprocket Shape Nominal Number Number of Teeth(T) Shaft Bore Dia. d(mm) Number of Strands Material Chain Type Type Shaft Type Surface Treatment Roller Type Shape B 80 10 ～ 40 15 ～ 26 1 Stainless Steel RS Pilot Hole Type Standard Pilot Bore Not Provided - From: 1,535,276 VND Days to Ship: Số ngày giao hàng: 11 Day(s) or more
11 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Standard 2080 Double Pitch Sprocket, S Roller B Type
KATAYAMA CHAIN
Rich lineup of variations in KANA standard sprocket count, number of teeth, and shape. The shaft holes of this product are not yet machined, so machining of shaft holes is required when using.
Sprocket Shape Nominal Number Number of Teeth(T) Shaft Bore Dia. d(mm) Number of Strands Material Chain Type Type Shaft Type Surface Treatment Roller Type Shape B C2080H 13 ～ 25 16 ～ 26 1 Steel Double Pitch Pilot Hole Type Standard Pilot Bore Not Provided S Roller From: 824,490 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Standard 2082 Double Pitch Sprocket, R Roller B Type
KATAYAMA CHAIN
Rich lineup of variations in KANA standard sprocket count, number of teeth, and shape. The shaft holes of this product are not yet machined, so machining of shaft holes is required when using.
Sprocket Shape Nominal Number Number of Teeth(T) Shaft Bore Dia. d(mm) Number of Strands Material Chain Type Type Shaft Type Surface Treatment Roller Type Shape B C2082H 7 ～ 30 22 ～ 35 1 Steel Double Pitch Pilot Hole Type Standard Pilot Bore Not Provided R Roller From: 1,506,220 VND Days to Ship: Số ngày giao hàng: 8 Day(s) or more
8 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
2040 Double Pitch Sprocket, B Type for S Roller, Shaft Hole Machined
KATAYAMA CHAIN
The semi-F series is a system for simple set up and rapid delivery of completed products with the desired machining (internal diameter, keyway, tap) of products with pilot holes completed.
Sprocket Shape Nominal Number Number of Teeth(T) Shaft Bore Dia. d(mm) Number of Strands Material Chain Type Type Shaft Type Surface Treatment Roller Type Shape B C2040 19 ～ 25 15 ～ 51 1 Stainless Steel Double Pitch Shaft Bore Machined Type Shaft Bore Machining Configurable Not Provided S Roller From: 2,022,348 VND Days to Ship: Số ngày giao hàng: 11 Day(s) or more
11 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Stainless Steel Sprocket Model 40B, Semi-F Series, Shaft Hole Machining Finish (New JIS Key)
KATAYAMA CHAIN
The semi-F series is a system for simple set up and rapid delivery of completed products with the desired machining (internal diameter, keyway, tap) of products with pilot holes completed.
Sprocket Shape Nominal Number Number of Teeth(T) Shaft Bore Dia. d(mm) Number of Strands Material Chain Type Type Shaft Type Surface Treatment Roller Type Shape B 40 10 ～ 40 10 ～ 51 1 Stainless Steel RS Shaft Bore Machined Type Shaft Bore Machining Configurable Not Provided - From: 1,097,451 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Sprocket, Standard Sprocket, 100B Type
KATAYAMA CHAIN
[Features]·The one provided with keyway is also selectable. ·Chain No. 100. [Materials]·Steel.
Sprocket Shape Nominal Number Number of Teeth(T) Shaft Bore Dia. d(mm) Number of Strands Material Chain Type Type Shaft Type Surface Treatment Roller Type Shape B 100 9 ～ 65 20 ～ 26 1 Steel RS Pilot Hole Type Standard Pilot Bore - - From: 640,500 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
SUSFBN60B Stainless Steel Finished Bore Sprocket
KATAYAMA CHAIN
FBN finished sprocket has shaft hole tolerance H7, standard grade parallel keys that satisfy JIS standards, metric coarse machining, and hex socket head screws already inserted.
Sprocket Shape Nominal Number Number of Teeth(T) Shaft Bore Dia. d(mm) Number of Strands Material Chain Type Type Shaft Type Surface Treatment Roller Type Shape B 60 10 ～ 30 20 ～ 40 1 Stainless Steel RS Shaft Bore Machined Type Shaft Bore Machining Configurable Not Provided - From: 1,110,685 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Stainless steel sprocket type 60B
KATAYAMA CHAIN
Rich lineup of variations in KANA standard sprocket count, number of teeth, and shape. The shaft holes of this product are not yet machined, so machining of shaft holes is required when using.
Sprocket Shape Nominal Number Number of Teeth(T) Shaft Bore Dia. d(mm) Number of Strands Material Chain Type Type Shaft Type Surface Treatment Roller Type Shape B 60 10 ～ 40 14 ～ 20 1 Stainless Steel RS Pilot Hole Type Standard Pilot Bore Not Provided - From: 801,120 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Sprocket for acceleration and carrier chain
KATAYAMA CHAIN
KANA dedicated sprocket for acceleration and carrier chains.[Features]· Special roller structure allows chain speed to stop at approximately 1/2.5 of the pallet speed.· Therefore, it is optimal for lines that have issues with running noise quietness.· Also, because it has excellent rise response after accumulation not obtainable with general free flow chains, it is optimal for assembly lines and the like that have repeated conveyance and stagnation.· In comparison with conventional side rollers and top rollers, carrier chains allow for better stability of transported goods and compactification of running parts and return parts.· New type of free flow chain to replace top rollers, with rollers for conveyance that are positioned above the pitch line for stabler conveyance than top rollers
Sprocket Shape Nominal Number Number of Teeth(T) Shaft Bore Dia. d(mm) Number of Strands Material Chain Type Type Shaft Type Surface Treatment Roller Type Shape B C3 ～ C6 9 ～ 12 9.53 ～ 20 1 Steel Carrier Chain Pilot Hole Type Standard Pilot Bore Not Provided - From: 574,190 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Standard 2060 Double Pitch Sprocket, S Roller B Type
KATAYAMA CHAIN
Rich lineup of variations in KANA standard sprocket count, number of teeth, and shape. The shaft holes of this product are not yet machined, so machining of shaft holes is required when using.
Sprocket Shape Nominal Number Number of Teeth(T) Shaft Bore Dia. d(mm) Number of Strands Material Chain Type Type Shaft Type Surface Treatment Roller Type Shape B C2060H 13 ～ 25 14 ～ 18 1 Steel Double Pitch Pilot Hole Type Standard Pilot Bore Not Provided S Roller From: 425,806 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Standard 2102 Double Pitch Sprocket, R Roller B Type
KATAYAMA CHAIN
Rich lineup of variations in KANA standard sprocket count, number of teeth, and shape. The shaft holes of this product are not yet machined, so machining of shaft holes is required when using.
Sprocket Shape Nominal Number Number of Teeth(T) Shaft Bore Dia. d(mm) Number of Strands Material Chain Type Type Shaft Type Surface Treatment Roller Type Shape B C2102H 10 ～ 12 35 1 Steel Double Pitch Pilot Hole Type Standard Pilot Bore Not Provided R Roller From: 3,234,516 VND Days to Ship: Số ngày giao hàng: 11 Day(s) or more
11 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Standard Sprocket Model, Type 80B, Semi-F Series, Shaft Hole Machining Completed (New JIS Key)
KATAYAMA CHAIN
The semi-F series is a system for simple set up and rapid delivery of completed products with the desired machining (internal diameter, keyway, tap) of products with pilot holes completed.
Sprocket Shape Nominal Number Number of Teeth(T) Shaft Bore Dia. d(mm) Number of Strands Material Chain Type Type Shaft Type Surface Treatment Roller Type Shape B 80 8 ～ 90 15 ～ 95 1 Steel RS Shaft Bore Machined Type Shaft Bore Machining Configurable - - From: 758,771 VND Days to Ship: Số ngày giao hàng: 11 Day(s) or more
11 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Standard Sprocket - 120B - C type - Semi F Series - Shaft Holes Machined (New JIS Key)
KATAYAMA CHAIN
The semi-F series is a system for simple set up and rapid delivery of completed products with the desired machining (internal diameter, keyway, tap) of products with pilot holes completed.
Sprocket Shape Nominal Number Number of Teeth(T) Shaft Bore Dia. d(mm) Number of Strands Material Chain Type Type Shaft Type Surface Treatment Roller Type Shape B 120 10 ～ 50 24 ～ 103 1 Steel RS Shaft Bore Machined Type Shaft Bore Machining Configurable - - From: 2,035,016 VND Days to Ship: Số ngày giao hàng: 11 Day(s) or more
11 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Standard Sprocket - 140B - C type - Semi F Series - Shaft Holes Machined (New JIS Key)
KATAYAMA CHAIN
The semi-F series is a system for simple set up and rapid delivery of completed products with the desired machining (internal diameter, keyway, tap) of products with pilot holes completed.
Sprocket Shape Nominal Number Number of Teeth(T) Shaft Bore Dia. d(mm) Number of Strands Material Chain Type Type Shaft Type Surface Treatment Roller Type Shape B 140 10 ～ 42 27 ～ 110 1 Steel RS Shaft Bore Machined Type Shaft Bore Machining Configurable - - From: 3,007,688 VND Days to Ship: Số ngày giao hàng: 11 Day(s) or more
11 Day(s) or more
| BrandNhãn hiệu |
|---|
| Product SeriesDòng sản phẩm |
| CADCAD |
| From |
| Days to ShipSố ngày giao hàng |
| Sprocket Shape |
| Nominal Number |
| Number of Teeth(T) |
| Shaft Bore Dia. d(mm) |
| Number of Strands |
| Material |
| Chain Type |
| Type |
| Shaft Type |
| Surface Treatment |
| Roller Type |
You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | |
| BrandNhãn hiệu | KATAYAMA CHAIN | KATAYAMA CHAIN | KATAYAMA CHAIN | KATAYAMA CHAIN | KATAYAMA CHAIN | KATAYAMA CHAIN | KATAYAMA CHAIN | KATAYAMA CHAIN | KATAYAMA CHAIN | KATAYAMA CHAIN | KATAYAMA CHAIN | KATAYAMA CHAIN | KATAYAMA CHAIN | KATAYAMA CHAIN | KATAYAMA CHAIN | KATAYAMA CHAIN | KATAYAMA CHAIN | KATAYAMA CHAIN | KATAYAMA CHAIN | KATAYAMA CHAIN | KATAYAMA CHAIN | KATAYAMA CHAIN | KATAYAMA CHAIN | KATAYAMA CHAIN | KATAYAMA CHAIN | KATAYAMA CHAIN | KATAYAMA CHAIN | KATAYAMA CHAIN | KATAYAMA CHAIN | KATAYAMA CHAIN | KATAYAMA CHAIN | KATAYAMA CHAIN | KATAYAMA CHAIN | KATAYAMA CHAIN | KATAYAMA CHAIN | KATAYAMA CHAIN | KATAYAMA CHAIN | KATAYAMA CHAIN | KATAYAMA CHAIN | KATAYAMA CHAIN | KATAYAMA CHAIN | KATAYAMA CHAIN | KATAYAMA CHAIN | KATAYAMA CHAIN | KATAYAMA CHAIN |
| Product SeriesDòng sản phẩm | Standard Sprocket 100B/C Type, Semi-F Series, Shaft Hole Machining Completed (New JIS Key) | Standard Sprocket Model NK50-2B, Semi-F Series, Shaft Hole Machining Finish (New JIS Key) | Stainless steel sprocket type 80B semi F Series, shaft bore machined (new JIS key) | Standard Sprocket Model, Type 60B, Semi-F Series, Shaft Hole Machining Completed (New JIS Key) | Standard Sprocket, NK100-2B Form, Semi F Series, Shaft Holes Already Established (New JIS Key) | Standard Sprocket Model NK60-2B, Semi-F Series, Shaft Hole Machining Finish (New JIS Key) | Standard Sprocket, 160B - C Form, Semi F Series, Shaft Holes Already Established (New JIS Key) | Standard Sprocket Model, Type 40B, Semi-F Series, Shaft Hole Machining Completed (New JIS Key) | Standard Sprocket NK35-2B, Shaft Hole Machined (New JIS Key) | Standard Sprocket Model NK40-2B, Semi-F Series, Shaft Hole Machining Finish (New JIS Key) | SUS Standard Stainless Steel 2052 Double Pitch Sprocket For R Roller B Type | 2040 Double Pitch Sprocket, B Type for S Roller, Shaft Hole Machined | Stainless Steel Sprocket Model 40B, Semi-F Series, Shaft Hole Machining Finish (New JIS Key) | Standard Sprocket Model, Type 80B, Semi-F Series, Shaft Hole Machining Completed (New JIS Key) | Standard Sprocket - 120B - C type - Semi F Series - Shaft Holes Machined (New JIS Key) | Standard Sprocket - 140B - C type - Semi F Series - Shaft Holes Machined (New JIS Key) | |||||||||||||||||||||||||||||
| CADCAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| From | 1,173,091 VND- | 221,241 VND- | 184,681 VND- | 365,756 VND- | 113,356 VND- | 187,875 VND- | 270,541 VND- | 142,740 VND- | 489,275 VND- | 1,016,158 VND- | 3,515,378 VND- | 623,340 VND- | 590,461 VND- | 2,904,545 VND- | 332,081 VND- | 1,129,886 VND- | 575,805 VND- | 424,186 VND- | 91,146 VND- | 441,929 VND- | 3,985,530 VND- | 78,687 VND- | 461,583 VND- | 1,312,738 VND- | 1,216,676 VND- | 283,381 VND- | 829,566 VND- | 928,718 VND- | 757,188 VND- | 951,601 VND- | 1,906,995 VND- | 1,535,276 VND- | 824,490 VND- | 1,506,220 VND- | 2,022,348 VND- | 1,097,451 VND- | 640,500 VND- | 1,110,685 VND- | 801,120 VND- | 574,190 VND- | 425,806 VND- | 3,234,516 VND- | 758,771 VND- | 2,035,016 VND- | 3,007,688 VND- |
| Days to ShipSố ngày giao hàng | 6 Day(s) or more | Same day or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 11 Day(s) or more | 11 Day(s) or more | 6 Day(s) or more | 11 Day(s) or more | 11 Day(s) or more | 6 Day(s) or more | 11 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 11 Day(s) or more | 11 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 7 Day(s) or more | 11 Day(s) or more | 6 Day(s) or more | 11 Day(s) or more | 11 Day(s) or more | 9 Day(s) or more | 11 Day(s) or more | 6 Day(s) or more | 8 Day(s) or more | 11 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 11 Day(s) or more | 11 Day(s) or more | 11 Day(s) or more | 11 Day(s) or more |
| Sprocket Shape | Shape B | Shape B | Shape B | Shape B | Shape B | Shape B | Shape B | Shape B | Shape B | Shape B | Shape B | Shape B | Shape B | Shape B | Shape B | Shape B | Shape B | Shape B | Shape B | Shape B | Shape B | Shape B | Shape B | Shape B | Shape B | Shape B | Shape B | Shape B | Shape B | Shape B | Shape B | Shape B | Shape B | Shape B | Shape B | Shape B | Shape B | Shape B | Shape B | Shape B | Shape B | Shape B | Shape B | Shape B | Shape B |
| Nominal Number | 100 | 40 | 60 | 60 | 40 | 35 | 50 | 50 | 35 | 50 | 80 | 40 | 60 | 100 | 80 | 60 | 80 | C2052 | 35 | 60 | 160 | 25 | 40 | C2062H | 120 | C2042 | 35 | 40 | C2042 | C2052 | C2052 | 80 | C2080H | C2082H | C2040 | 40 | 100 | 60 | 60 | C3 ～ C6 | C2060H | C2102H | 80 | 120 | 140 |
| Number of Teeth(T) | 9 ～ 65 | 9 ～ 50 | 8 ～ 90 | 9 ～ 45 | 8 ～ 90 | 9 ～ 40 | 9 ～ 50 | 8 ～ 90 | 10 ～ 40 | 10 ～ 70 | 10 ～ 40 | 10 ～ 40 | 8 ～ 90 | 10 ～ 54 | 8 ～ 90 | 10 ～ 70 | 9 ～ 30 | 7 ～ 30 | 8 ～ 80 | 10 ～ 26 | 10 ～ 35 | 10 ～ 80 | 8 ～ 90 | 7 ～ 30 | 10 ～ 50 | 7 ～ 32 | 10 ～ 60 | 10 ～ 70 | 7 ～ 32 | 7 ～ 30 | 10 ～ 13 | 10 ～ 40 | 13 ～ 25 | 7 ～ 30 | 19 ～ 25 | 10 ～ 40 | 9 ～ 65 | 10 ～ 30 | 10 ～ 40 | 9 ～ 12 | 13 ～ 25 | 10 ～ 12 | 8 ～ 90 | 10 ～ 50 | 10 ～ 42 |
| Shaft Bore Dia. d(mm) | 21 ～ 103 | 10 ～ 45 | 12 ～ 26 | 18 ～ 55 | 9 ～ 20 | 10 ～ 38 | 14 ～ 50 | 10 ～ 20 | 10 ～ 30 | 14 ～ 80 | 16 ～ 75 | 12 ～ 30 | 13 ～ 80 | 24 ～ 103 | 14 ～ 26 | 14 ～ 89 | 24 ～ 60 | 20 ～ 26 | 8 ～ 16 | 20 ～ 50 | 27 ～ 118 | 6 ～ 12 | 10 ～ 60 | 21 ～ 63 | 23 ～ 30 | 14 ～ 26 | 11 ～ 63 | 11 ～ 66 | 15 ～ 55 | 21 ～ 55 | 20 | 15 ～ 26 | 16 ～ 26 | 22 ～ 35 | 15 ～ 51 | 10 ～ 51 | 20 ～ 26 | 20 ～ 40 | 14 ～ 20 | 9.53 ～ 20 | 14 ～ 18 | 35 | 15 ～ 95 | 24 ～ 103 | 27 ～ 110 |
| Number of Strands | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 2 | 1 | 1 | 1 | 2 | 1 / 2 | 2 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 2 | 2 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 |
| Material | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Stainless Steel | Steel | Stainless Steel | Stainless Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Stainless Steel | Stainless Steel | Steel | Steel | Stainless Steel | Stainless Steel | Steel | Stainless Steel | Stainless Steel | Steel | Steel | Steel | Steel | Steel | Steel |
| Chain Type | RS | RS | RS | RS | RS | RS | RS | RS | RS | RS | RS | RS | RS | RS | RS | RS | RS | Double Pitch | RS | RS | RS | RS | RS | Double Pitch | RS | Double Pitch | RS | RS | Double Pitch | Double Pitch | Double Pitch | RS | Double Pitch | Double Pitch | Double Pitch | RS | RS | RS | RS | Carrier Chain | Double Pitch | Double Pitch | RS | RS | RS |
| Type | Shaft Bore Machined Type | Shaft Bore Machined Type | Pilot Hole Type | Shaft Bore Machined Type | Pilot Hole Type | Shaft Bore Machined Type | Shaft Bore Machined Type | Pilot Hole Type | Shaft Bore Machined Type | Shaft Bore Machined Type | Shaft Bore Machined Type | Shaft Bore Machined Type | Shaft Bore Machined Type | Shaft Bore Machined Type | Pilot Hole Type | Shaft Bore Machined Type | Shaft Bore Machined Type | Pilot Hole Type | Pilot Hole Type | Shaft Bore Machined Type | Shaft Bore Machined Type | Pilot Hole Type | Shaft Bore Machined Type | Shaft Bore Machined Type | Pilot Hole Type | Pilot Hole Type | Shaft Bore Machined Type | Shaft Bore Machined Type | Shaft Bore Machined Type | Shaft Bore Machined Type | Pilot Hole Type | Pilot Hole Type | Pilot Hole Type | Pilot Hole Type | Shaft Bore Machined Type | Shaft Bore Machined Type | Pilot Hole Type | Shaft Bore Machined Type | Pilot Hole Type | Pilot Hole Type | Pilot Hole Type | Pilot Hole Type | Shaft Bore Machined Type | Shaft Bore Machined Type | Shaft Bore Machined Type |
| Shaft Type | Shaft Bore Machining Configurable | Shaft Bore Machining Configurable | Standard Pilot Bore | Shaft Bore Machining Configurable | Standard Pilot Bore | Shaft Bore Machining Configurable | Shaft Bore Machining Configurable | Standard Pilot Bore | Shaft Bore Machining Configurable | Shaft Bore Machining Configurable | Shaft Bore Machining Configurable | Shaft Bore Machining Configurable | Shaft Bore Machining Configurable | Shaft Bore Machining Configurable | Standard Pilot Bore | Shaft Bore Machining Configurable | Shaft Bore Machining Configurable | Standard Pilot Bore | Standard Pilot Bore | Shaft Bore Machining Configurable | Shaft Bore Machining Configurable | Standard Pilot Bore | Shaft Bore Machining Configurable | Shaft Bore Machining Configurable | Standard Pilot Bore | Standard Pilot Bore | Shaft Bore Machining Configurable | Shaft Bore Machining Configurable | Shaft Bore Machining Configurable | Shaft Bore Machining Configurable | Standard Pilot Bore | Standard Pilot Bore | Standard Pilot Bore | Standard Pilot Bore | Shaft Bore Machining Configurable | Shaft Bore Machining Configurable | Standard Pilot Bore | Shaft Bore Machining Configurable | Standard Pilot Bore | Standard Pilot Bore | Standard Pilot Bore | Standard Pilot Bore | Shaft Bore Machining Configurable | Shaft Bore Machining Configurable | Shaft Bore Machining Configurable |
| Surface Treatment | - | Not Provided | - | Not Provided | - | Not Provided | Not Provided | - | Not Provided | - | Not Provided | Not Provided | - | - | - | - | Not Provided | Not Provided | - | Not Provided | - | Not Provided | - | Not Provided | - | Not Provided | - | - | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | - | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | - | - | - |
| Roller Type | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | R Roller | - | - | - | - | - | R Roller | - | R Roller | - | - | R Roller | R Roller | R Roller | - | S Roller | R Roller | S Roller | - | - | - | - | - | S Roller | R Roller | - | - | - |
Loading...Tải…
ConfigureTạo
Specification/DimensionsĐặc điểm kỹ thuật / Kích thướcĐặc điểm kỹ thuật / Kích thước
-
Sprocket Shape
-
Shape A -
Shape B -
Shape C -
Shape SD
-
-
Nominal Number
-
Number of Teeth(T)
-
Shaft Bore Dia. d(mm)
- 4
- 5
- 6
- 7
- 8
- 9
- 9.53
- 10
- 10K
- 11
- 12
- 12.7
- 13
- 14
- 15
- 16
- 17
- 18
- 19
- 20
- 21
- 22
- 23
- 24
- 25
- 26
- 27
- 28
- 29
- 30
- 31
- 32
- 33
- 34
- 35
- 36
- 37
- 38
- 39
- 40
- 41
- 42
- 43
- 44
- 45
- 46
- 47
- 48
- 49
- 50
- 51
- 52
- 53
- 54
- 55
- 56
- 57
- 58
- 59
- 60
- 61
- 62
- 63
- 64
- 65
- 66
- 67
- 68
- 69
- 70
- 71
- 72
- 73
- 74
- 75
- 76
- 77
- 78
- 79
- 80
- 81
- 82
- 83
- 84
- 85
- 86
- 87
- 88
- 89
- 90
- 91
- 92
- 93
- 94
- 95
- 96
- 97
- 98
- 99
- 100
- 101
- 102
- 103
- 104
- 105
- 106
- 107
- 108
- 109
- 110
- 111
- 112
- 113
- 114
- 115
- 116
- 117
- 118
- 119
- 120
- 121
- 122
- 123
- 124
- 125
- 126
- 127
- 128
- 129
- 130
- 131
- 132
- 133
- 134
- 135
- 136
- 137
- 138
- 139
- 140
- 141
- 142
- 143
- 144
- 145
- 146
- 147
- 148
- 149
- 150
- 151
- 152
- 153
- 154
- 155
-
Number of Strands
- 1
- 2
-
Material
- Steel
- Stainless Steel
- C3604B (Free-Cutting Brass Bar)
-
Chain Type
-
Type
- Pilot Hole Type
- Shaft Bore Machined Type
- Keyless Type
-
Shaft Type
-
Surface Treatment
-
Roller Type
Application example related to this categoryVí dụ ứng dụng liên quan đến danh mục này
Related Categories to SprocketsDanh mục liên quan đến Sprockets
FAQ Sprockets
- Question: What are sprockets and how are they used in mechanical systems?
- Answer: Chain sprockets are mechanical components used in combination with chains to enable drive forces to be transmitted via a chain. The sprocket teeth engage with the chain links to establish a connection between the sprocket and the chain. Sprockets are crucial elements in the design and mechanics of machines and systems, indispensable for the mechanical transmission of movement and force, for example, in chain conveyors, packaging machines, and printing presses.
- Question: Can you explain the different types of sprockets, such as A, B, and C types?
- Answer: Chain sprockets are categorized into four main types of sprockets as established by the American National Standards Institute (ANSI):
1. Type A sprockets have no hubs, consisting solely of the plate with teeth.
2. Type B sprockets have a hub on one side for heavy loads and larger systems.
3. Type C sprockets, which have hubs of equal thickness on both sides of the plate for heavy loads and larger systems.
4. Type C (Offset) sprockets, also referred to as Type D, have two unequal-sized hubs, forming an asymmetric sprocket The choice of sprocket type depends on the specific requirements of the machine or system, such as space constraints, load capacity, and desired performance characteristics. - Question: What materials are commonly used to manufacture sprockets, and why?
- Answer: Chain sprockets are commonly manufactured using various materials, each chosen for specific applications and performance characteristics. The most common materials for chain sprockets include:
1.Carbon Steel: Suitable for solid sprockets in non-corrosive environments. It offers good wear resistance and is cost-effective.
2.Stainless Steel: Used for solid sprockets in corrosive environments. It provides excellent corrosion resistance and durability, such as in vegetable processing.
3.Plastic (UHMW Polyethylene and Nylon): These materials are used for sprockets in food processing and other industries where cleanliness and low friction are important. UHMW Polyethylene can withstand continuous temperatures up to 180°F, while Nylon sprockets provide 2-3 times the strength of UHMW and can withstand higher temperatures - Question: How does the number of teeth on a sprocket affect its performance?
- Answer: The number of teeth on a chain sprocket significantly impacts its performance. More teeth result in higher torque but lower speed, while fewer teeth lead to higher speed but less torque, following gear ratio principles. This choice affects wear and durability, as fewer teeth concentrate load, potentially increasing wear, while more teeth distribute load, enhancing durability. Additionally, sprockets with more teeth often provide smoother motion, reducing noise and vibration. Spatial constraints within the system must also be considered. Overall, the number of teeth on a chain sprocket is critical, influencing torque, speed, wear, durability, smoothness of operation.
- Question: What should be considered when selecting a sprocket for a specific application?
- Answer: Factors to consider when selecting a chain sprocket:
1. Chain Size: Ensure compatibility with the chain's size, pitch, and width for proper engagement and wear prevention.
2. Number of Teeth: Determine the appropriate number of teeth to balance speed, torque, and efficiency, considering the input-output relationship.
3. Material: Choose the sprocket material based on environmental conditions, load capacity, temperature range, and chemical resistance. Options include carbon steel, stainless steel, and plastic.
4. Shaft Size: Ensure compatibility with shaft size and type.
5. Alignment: Properly align the sprocket with the chain and other system components to prevent premature wear and ensure optimal performance.
6. Lubrication: Use appropriate lubrication compatible with the sprocket material and environmental conditions to prevent wear and extend the life of the chain and sprocket. - Question: How does the material of a sprocket influence its strength and friction resistance?
- Answer: When selecting material for chain sprockets, several key factors must be considered:
1. Selection Criteria: Material choice based on environmental conditions, load capacity, temperature range, and chemical resistance.
2. Strength and Friction Resistance: Material choice significantly impacts these characteristics.
3. Hardening Process: Essential for enhancing wear resistance and shock load absorption in sprocket teeth.
4. Optimization: The right material and hardening process optimize strength and friction resistance for specific applications.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy