(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.
Brand |
|
---|---|
Filter By |
|
CAD |
|
Days to Ship |
|
77 itemsMặt hàng
You can add up to 6 items per a category to the compare list.
FPTOOLS
[Features]· Easy tool management: As well as being suitable for high-precision drilling as the nominal dimensions are manufactured with 1 μm increments, 11,800 sizes are available for selection.· Ultra-high precision: Tolerance of 0 to less than +1 μm is ideal for drilling ultra-precision holes.· High durability: Excellent durability, maintaining precision over long periods of time.· Application: General work materials.
Tool Diameter(mm) | Groove Length(mm) | work material | Shank Type | Coating Y/N | Groove Shape | Base Blade Y/N | Tip diameter | Large End Diameter | radius R | Both square |
---|---|---|---|---|---|---|---|---|---|---|
0.5 ~ 10.009 | 5 ~ 40 | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] / Resin[○] / Die Steel[◎] / Alloy Steel[◎] | End Mill Shank | NA | Straight | NA | - | - | - | - |
From: 1,247,050 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
FPTOOLS
[Features]· The most universally usable reamer among all series of carbide reamers.· Approximately 5 to 10 times greater durability than conventional HSS reamers, maintaining its precision for long periods of time.· Processing hole precision is also superior to the HSS reamer, allowing use at higher cutting speed and feeding speed.· Because the pitch is 0.005 mm, there are no breaks between sizes and negative tolerance hole drilling is also possible.
Tool Diameter(mm) | Groove Length(mm) | work material | Shank Type | Coating Y/N | Groove Shape | Base Blade Y/N | Tip diameter | Large End Diameter | radius R | Both square |
---|---|---|---|---|---|---|---|---|---|---|
0.2 ~ 12.1 | 3 ~ 45 | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] / Resin[○] / Die Steel[◎] / Alloy Steel[◎] | End Mill Shank | NA | Straight | NA | - | - | - | - |
From: 519,142 VND |
---|
Days to Ship: Số ngày giao hàng: Same day or more |
You can add up to 6 items per a category to the compare list.
OSG
Cemented carbide is used for the cutting edge material.·Supply sufficient cutting fluid.·Use a chuck with high precision.·It may be necessary to change the conditions depending on the workpiece and the rigidity of the machine.
Tool Diameter(mm) | Groove Length(mm) | work material | Shank Type | Coating Y/N | Groove Shape | Base Blade Y/N | Tip diameter | Large End Diameter | radius R | Both square |
---|---|---|---|---|---|---|---|---|---|---|
0.3 ~ 13.05 | - | general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | End Mill Shank | NA | Straight | NA | - | - | - | - |
From: 970,000 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
FPTOOLS
[Features]· A hand reamer is used to finish the bore and the tip bite section is given a slight gradient (about 1 degree) to improve the guidance.· Blade diameter tolerance is unique at +0.005/0(J5).
Tool Diameter(mm) | Groove Length(mm) | work material | Shank Type | Coating Y/N | Groove Shape | Base Blade Y/N | Tip diameter | Large End Diameter | radius R | Both square |
---|---|---|---|---|---|---|---|---|---|---|
0.3 ~ 2.895 | 7 ~ 35 | general steel[○] / Quenched and tempered steel[○] / Aluminum[○] / Copper[○] / Resin[○] / Die Steel[○] / Alloy Steel[○] | End Mill Shank | NA | Straight | NA | - | - | - | - |
From: 575,994 VND |
---|
Special Price |
Days to Ship: Số ngày giao hàng: Same day or more |
You can add up to 6 items per a category to the compare list.
FPTOOLS
[Features]· Ultra-low price contributes to cost reductions.· Carbide is used for the reamer, greatly reducing the price.· It will help reduce the machining costs by the improvement of tool life and reduction of tool costs.· Deep hole machining possible: Thinner shank diameter makes it possible to machine deep holes.· The processing range can be expanded.· High-precision: Precision equivalent to the best-selling carbide reamer "G-Series".· Can be used with peace of mind
Tool Diameter(mm) | Groove Length(mm) | work material | Shank Type | Coating Y/N | Groove Shape | Base Blade Y/N | Tip diameter | Large End Diameter | radius R | Both square |
---|---|---|---|---|---|---|---|---|---|---|
2.91 ~ 12.1 | 20 ~ 25 | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] / Resin[○] / Die Steel[◎] / Alloy Steel[◎] | End Mill Shank | NA | Straight | NA | - | - | - | - |
From: 722,944 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
F.P. Gold Reamer Straight Blade
FPTOOLS
[Features]· Reduces the processing cost. It boasts tool life about twice that of HSS machines and chucking reamers.· Furthermore, it also boasts a super-low price with a discount of approximately 50%.· With TiN coating, cutting speed and durability are at least doubled compared to conventional HSS machines and chucking reamers.· Outstanding circularity and surface roughness.· Shank diameter is endmill shank type.
Tool Diameter(mm) | Groove Length(mm) | work material | Shank Type | Coating Y/N | Groove Shape | Base Blade Y/N | Tip diameter | Large End Diameter | radius R | Both square |
---|---|---|---|---|---|---|---|---|---|---|
1 ~ 14.05 | 20 ~ 85 | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] / Resin[○] / Die Steel[○] / Alloy Steel[○] | End Mill Shank | Available | Straight | NA | - | - | - | - |
From: 592,519 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
TRUSCO NAKAYAMA
[Features]· Supports high-speed rotation unlike a hand reamer, and can therefore be used for difficult-to-cut materials. Counter-clockwise spiral, high-lead flute diameter. 60° torsion angle. [Applications]· Work material: Soft steel, general steel, stainless steel, cast iron, light alloy.
Tool Diameter(mm) | Groove Length(mm) | work material | Shank Type | Coating Y/N | Groove Shape | Base Blade Y/N | Tip diameter | Large End Diameter | radius R | Both square |
---|---|---|---|---|---|---|---|---|---|---|
2.1 ~ 2.9 | - | general steel[○] / Stainless Steel[○] / Cast Iron[○] | End Mill Shank | NA | Spiral | - | - | - | - | - |
From: 909,406 VND |
---|
Days to Ship: Số ngày giao hàng: 9 Day(s) |
You can add up to 6 items per a category to the compare list.
FPTOOLS
Cutting capacity for quenched hardness around 60 HRC, thanks to purple coating for high-hardness steel and right-lead blade shape. Shank diameter is endmill shank type.
Tool Diameter(mm) | Groove Length(mm) | work material | Shank Type | Coating Y/N | Groove Shape | Base Blade Y/N | Tip diameter | Large End Diameter | radius R | Both square |
---|---|---|---|---|---|---|---|---|---|---|
1 ~ 12.1 | 15 ~ 65 | Quenched and tempered steel[◎] | End Mill Shank | Available | Spiral | NA | - | - | - | - |
From: 1,694,871 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
EIKOSHA
General-purpose straight reamer (HSS) with straight edge that can be hand turned.[Features]· The shank has an angle and can be hand turned.· The bite is long (angle set at 1°) and the cutting edge does not easily get damaged.· Blade tip diameter: Available from 0.5 to 60.· Shank type: Available in end mill shank and straight shank.· Applicable work materials: General steel, cast iron, aluminum, copper, die steel and alloy steel.· Material: SKH51. Right-blade Straight, Bite Angle: 1°.[Applications]· Optimal for general purpose finishing.
Tool Diameter(mm) | Groove Length(mm) | work material | Shank Type | Coating Y/N | Groove Shape | Base Blade Y/N | Tip diameter | Large End Diameter | radius R | Both square |
---|---|---|---|---|---|---|---|---|---|---|
0.56 ~ 3 | 12 ~ 40 | general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[○] / Alloy Steel[○] | End Mill Shank | NA | Straight | NA | - | - | - | - |
From: 527,011 VND |
---|
Special Price |
Days to Ship: Số ngày giao hàng: Same day or more |
You can add up to 6 items per a category to the compare list.
EIKOSHA
TiCN647 coating adopted. Prevents welding and improves the roughness of the finished surface
Tool Diameter(mm) | Groove Length(mm) | work material | Shank Type | Coating Y/N | Groove Shape | Base Blade Y/N | Tip diameter | Large End Diameter | radius R | Both square |
---|---|---|---|---|---|---|---|---|---|---|
0.8 ~ 12.05 | 12 ~ 45 | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Die Steel[◎] / Heat-resistant alloy[○] / Alloy Steel[◎] | End Mill Shank | Available | Straight | NA | - | - | - | - |
From: 1,351,933 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Regular Model
MISUMI
[Features]·Since it has end flute, it can simultaneously correct the curvature of the hole with the milling function and improve the surface roughness with the burnishing function·Direct reaming is possible without correction by an end mill after drilling a pilot hole
Tool Diameter(mm) | Groove Length(mm) | work material | Shank Type | Coating Y/N | Groove Shape | Base Blade Y/N | Tip diameter | Large End Diameter | radius R | Both square |
---|---|---|---|---|---|---|---|---|---|---|
0.3 ~ 15.995 | 0.5 ~ 48 | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | End Mill Shank | NA | Straight | Available | - | - | - | - |
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Powerful Carbide Reamer Hundredths (0.01 mm Jump) CPRM
OKAZAKI SEIKO
[Features]· Solid type・ The rough cutting edge at the tip stabilizes the finished dimensions with a uniform machining allowance.· Helix angle 35°・ Rough flute, finishing edge 2 steps finish
Tool Diameter(mm) | Groove Length(mm) | work material | Shank Type | Coating Y/N | Groove Shape | Base Blade Y/N | Tip diameter | Large End Diameter | radius R | Both square |
---|---|---|---|---|---|---|---|---|---|---|
2.95 ~ 12.05 | 20 ~ 31 | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Alloy Steel[○] | End Mill Shank | NA | Helical | NA | - | - | - | - |
From: 1,490,738 VND |
---|
Days to Ship: Số ngày giao hàng: 10 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Cobalt High-Speed Steel Spiral Reamer
MISUMI
[Features]·Cobalt high-speed steel spiral reamer with high versatility·Design with 10° left helix angle and 45° tip chamfer angle·Helical blade reduces cutting force
Tool Diameter(mm) | Groove Length(mm) | work material | Shank Type | Coating Y/N | Groove Shape | Base Blade Y/N | Tip diameter | Large End Diameter | radius R | Both square |
---|---|---|---|---|---|---|---|---|---|---|
1 ~ 13 | 15 ~ 44 | general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | End Mill Shank | NA | Spiral | NA | - | - | - | - |
From: 534,026 VND |
---|
Days to Ship: Số ngày giao hàng: 4 Day(s) or more |
You can add up to 6 items per a category to the compare list.
FPTOOLS
[Features]· Cutting speed can be increased by 50% compared to carbide straight blade types.· Ideal for deep drilling: Long neck section.· Excellent anterior chip discharge: 30° torsion, left
Tool Diameter(mm) | Groove Length(mm) | work material | Shank Type | Coating Y/N | Groove Shape | Base Blade Y/N | Tip diameter | Large End Diameter | radius R | Both square |
---|---|---|---|---|---|---|---|---|---|---|
1 ~ 15.5 | 8 ~ 45 | general steel[◎] / Quenched and tempered steel[○] / Cast Iron[◎] / Resin[○] / Die Steel[○] / Alloy Steel[◎] | End Mill Shank | NA | Spiral | NA | - | - | - | - |
From: 1,809,820 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
FPTOOLS
[Features]· Capable of high-efficiency and high-precision machining thanks to its high-rigidity groove shape and short blade length.· As the bite length is short, it is capable of processing blind holes.· The cobalt HSS has been coated with a newly developed special coating featuring coating hardness of 3,700 Hv, providing excellent abrasion resistance.· End mill shank is adopted.
Tool Diameter(mm) | Groove Length(mm) | work material | Shank Type | Coating Y/N | Groove Shape | Base Blade Y/N | Tip diameter | Large End Diameter | radius R | Both square |
---|---|---|---|---|---|---|---|---|---|---|
1 ~ 12.095 | 12 ~ 30 | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[○] / Alloy Steel[◎] | End Mill Shank | Available | Spiral | NA | - | - | - | - |
From: 1,170,874 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Regular / Corner Radius Model
MISUMI
[Features]·Since it has end flute, it can simultaneously correct the curvature of the hole with the milling function and improve the surface roughness with the burnishing function·Direct reaming is possible without correction by an end mill after drilling a pilot hole
Tool Diameter(mm) | Groove Length(mm) | work material | Shank Type | Coating Y/N | Groove Shape | Base Blade Y/N | Tip diameter | Large End Diameter | radius R | Both square |
---|---|---|---|---|---|---|---|---|---|---|
0.4 ~ 15.995 | 0.5 ~ 48 | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | End Mill Shank | NA | Straight | Available | - | - | - | - |
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Regular / Corner C Model
MISUMI
[Features]·Since it has end flute, it can simultaneously correct the curvature of the hole with the milling function and improve the surface roughness with the burnishing function·Direct reaming is possible without correction by an end mill after drilling a pilot hole
Tool Diameter(mm) | Groove Length(mm) | work material | Shank Type | Coating Y/N | Groove Shape | Base Blade Y/N | Tip diameter | Large End Diameter | radius R | Both square |
---|---|---|---|---|---|---|---|---|---|---|
0.4 ~ 15.995 | 0.5 ~ 48 | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | End Mill Shank | NA | Straight | Available | - | - | - | - |
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Carbide Straight Reamer, Non-Coated / TS Coat for High-Hardness Steel Machining
MISUMI
[Features]·Carbide material enables high-speed cutting, greatly improving efficiency compared to high-speed steel reamers·TS coated products are ideal for finishing high hardness steel of 40 HRC or higher (TSC-XHR)
Tool Diameter(mm) | Groove Length(mm) | work material | Shank Type | Coating Y/N | Groove Shape | Base Blade Y/N | Tip diameter | Large End Diameter | radius R | Both square |
---|---|---|---|---|---|---|---|---|---|---|
1 ~ 10 | 12 ~ 40 | general steel[○/◎] / Quenched and tempered steel[○/◎] / high hardness steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | End Mill Shank | Available ~ NA | Straight | NA | - | - | - | - |
From: 829,294 VND |
---|
Days to Ship: Số ngày giao hàng: 4 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Carbide Step Reamer, Custom Dimensions Type
MISUMI
[Features]·2-stage hole drilling in 2 processes can be performed with 1 tool while keeping the coaxial·Large diameter can also be specified in addition to tip diameter, stepped length, and chamfer angle·Machining according to the shape of product, such as parts machining, is possible
Tool Diameter(mm) | Groove Length(mm) | work material | Shank Type | Coating Y/N | Groove Shape | Base Blade Y/N | Tip diameter | Large End Diameter | radius R | Both square |
---|---|---|---|---|---|---|---|---|---|---|
- | - | general steel[◎] / Aluminum[◎] | End Mill Shank | NA | Straight | - | - | - | - | - |
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Carbide Reamer for Stainless Steel CSUSR-A
EIKOSHA
[Features]· Ideal shape for stainless steel and other difficult-to-cut materials.· Heat-Resistant Coating· Abrasion Resistant Material· Right torsion
Tool Diameter(mm) | Groove Length(mm) | work material | Shank Type | Coating Y/N | Groove Shape | Base Blade Y/N | Tip diameter | Large End Diameter | radius R | Both square |
---|---|---|---|---|---|---|---|---|---|---|
0.5 ~ 12.05 | 6 ~ 45 | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Die Steel[○] / Heat-resistant alloy[○] / Alloy Steel[○] | End Mill Shank | Available | Spiral | NA | - | - | - | - |
From: 1,757,886 VND |
---|
Days to Ship: Số ngày giao hàng: Same day or more |
You can add up to 6 items per a category to the compare list.
EIKOSHA
Spiral reamer (HSS) for spool hole processing.[Features]·There are many angle variations, so it can be used for processing at various angles.[Applications]·Can be used as a deburring tool for spool bushings, etc.
Tool Diameter(mm) | Groove Length(mm) | work material | Shank Type | Coating Y/N | Groove Shape | Base Blade Y/N | Tip diameter | Large End Diameter | radius R | Both square |
---|---|---|---|---|---|---|---|---|---|---|
- | 60 ~ 160 | general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Alloy Steel[○] | End Mill Shank | NA | Spiral | NA | 2 ~ 10 | 3.04 ~ 37.99 | - | 1 ~ 10 |
From: 2,209,180 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Carbide Reamer FP Platinum Reamer
FPTOOLS
[Features]· Reamer shape ideal for high-speed machining: Achieves high-precision and high-speed machining thanks to its high torsion, highly rigid blade shape and eccentric chamfer blade.· Special coating: Features a special coating with an excellent oxidation resistance temperature and friction coefficient. This coating helps improve the tool service life and allows smooth cutting chip processing.· High-precision end mill shank: Shank tolerance of h5 is adopted.· Effective for machining stainless steel: General-purpose F.P. Platinum Reamer can even be used for high-speed machining of stainless steel.
Tool Diameter(mm) | Groove Length(mm) | work material | Shank Type | Coating Y/N | Groove Shape | Base Blade Y/N | Tip diameter | Large End Diameter | radius R | Both square |
---|---|---|---|---|---|---|---|---|---|---|
2.95 ~ 12.005 | 15 ~ 40 | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[◎] / Alloy Steel[◎] | End Mill Shank | Available | Spiral | NA | - | - | - | - |
From: 2,087,665 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
EIKOSHA
High-speed steel high-torsion spiral reamer.[Features]· Excellent in surface roughness and cutting powder processing thanks to the adoption of 60° torsion.· Reduces cutting resistance.[Applications]· Convenient for general purpose finishing.
Tool Diameter(mm) | Groove Length(mm) | work material | Shank Type | Coating Y/N | Groove Shape | Base Blade Y/N | Tip diameter | Large End Diameter | radius R | Both square |
---|---|---|---|---|---|---|---|---|---|---|
15.02 ~ 16.05 | 45 | Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Copper[◎] / Die Steel[○] / Heat-resistant alloy[○] / Alloy Steel[○] | End Mill Shank | NA | Helical | NA | - | - | - | - |
From: 2,427,913 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
EIKOSHA
General-purpose spiral reamer (HSS) with torsion blade that can be hand turned.[Features]· The shank has an angle and can be hand turned.· The bite is long (angle set at 1°) and the cutting edge does not easily get damaged.· Adopts a torsion blade with excellent cutting powder discharge.[Applications]· For general purpose finishing.
Tool Diameter(mm) | Groove Length(mm) | work material | Shank Type | Coating Y/N | Groove Shape | Base Blade Y/N | Tip diameter | Large End Diameter | radius R | Both square |
---|---|---|---|---|---|---|---|---|---|---|
2.01 ~ 2.7 | 30 ~ 35 | general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[○] / Alloy Steel[○] | End Mill Shank | NA | Spiral | NA | - | - | - | - |
From: 889,268 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
CER Reamer with Carbide End Flutes
OKAZAKI SEIKO
Solid type. With a reamer for complete blind holes, the bottom surface can also be processed cleanly. It uses end mill shank.
Tool Diameter(mm) | Groove Length(mm) | work material | Shank Type | Coating Y/N | Groove Shape | Base Blade Y/N | Tip diameter | Large End Diameter | radius R | Both square |
---|---|---|---|---|---|---|---|---|---|---|
3 ~ 12 | 20 ~ 31 | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[◎] / Alloy Steel[◎] | End Mill Shank | NA | Spiral | Available | - | - | - | - |
From: 1,968,833 VND |
---|
Days to Ship: Số ngày giao hàng: 10 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Reamer with Carbide End Flutes CSER-C
EIKOSHA
[Features]· A reamer exclusively for blind holes.· TiCN coating for long life.
Tool Diameter(mm) | Groove Length(mm) | work material | Shank Type | Coating Y/N | Groove Shape | Base Blade Y/N | Tip diameter | Large End Diameter | radius R | Both square |
---|---|---|---|---|---|---|---|---|---|---|
1 ~ 12.055 | 5 ~ 30 | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] / Die Steel[◎] / Heat-resistant alloy[○] / Alloy Steel[◎] | End Mill Shank | Available | Spiral | Available | - | - | - | - |
From: 2,191,390 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Semicircular Spool Reamer SURH
EIKOSHA
A straight reamer for spool hole machining (HSS).[Features]· Various angles are available to support processing of various angles.· As it has a half-moon shape, it's easy to process chips.[Applications]· Optimal as a tool for removing grime from inside spool bushing, etc.· Convenient for half-moon shaped die spool hole processing.
Tool Diameter(mm) | Groove Length(mm) | work material | Shank Type | Coating Y/N | Groove Shape | Base Blade Y/N | Tip diameter | Large End Diameter | radius R | Both square |
---|---|---|---|---|---|---|---|---|---|---|
- | 60 ~ 160 | general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Alloy Steel[○] | End Mill Shank | NA | Straight | NA | 1 ~ 5 | 2.04 ~ 32.99 | - | 1゚ ~ 10゚ |
From: 2,147,784 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Carbide Solid Reamer Shank-Through Coolant CSGR-A
EIKOSHA
[Features]· The cutting speed is approximately 2.5 times that of conventional coating reamers.· The pinpoint lubrication improves the weld resistance and machined surface roughness
Tool Diameter(mm) | Groove Length(mm) | work material | Shank Type | Coating Y/N | Groove Shape | Base Blade Y/N | Tip diameter | Large End Diameter | radius R | Both square |
---|---|---|---|---|---|---|---|---|---|---|
2.97 ~ 20.03 | 19 ~ 25 | general steel[○] / Quenched and tempered steel[○] / Aluminum[○] / Copper[○] / Alloy Steel[○] | End Mill Shank | Available | Straight | NA | - | - | - | - |
From: 4,864,710 VND |
---|
Days to Ship: Số ngày giao hàng: 7 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Cermet Reamer SD For Stainless Steel Machining
FPTOOLS
[Features] · Excellent welding resistance, ensuring an outstanding finish when machining stainless steel.
Tool Diameter(mm) | Groove Length(mm) | work material | Shank Type | Coating Y/N | Groove Shape | Base Blade Y/N | Tip diameter | Large End Diameter | radius R | Both square |
---|---|---|---|---|---|---|---|---|---|---|
2.985 ~ 10.025 | 12 ~ 24 | Stainless Steel[○] | End Mill Shank | NA | Straight | NA | - | - | - | - |
From: 1,962,348 VND |
---|
Days to Ship: Số ngày giao hàng: 7 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Long Model
MISUMI
[Features]·Since it has end flute, it can simultaneously correct the curvature of the hole with the milling function and improve the surface roughness with the burnishing function·Direct reaming is possible without correction by an end mill after drilling a pilot hole·Long type allows machining of deep holes
Tool Diameter(mm) | Groove Length(mm) | work material | Shank Type | Coating Y/N | Groove Shape | Base Blade Y/N | Tip diameter | Large End Diameter | radius R | Both square |
---|---|---|---|---|---|---|---|---|---|---|
0.3 ~ 5.995 | 0.5 ~ 34 | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | End Mill Shank | NA | Straight | Available | - | - | - | - |
Days to Ship: Số ngày giao hàng: 8 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Long / Corner Radius Model
MISUMI
[Features]·Since it has end flute, it can simultaneously correct the curvature of the hole with the milling function and improve the surface roughness with the burnishing function·Direct reaming is possible without correction by an end mill after drilling a pilot hole·Long type allows machining of deep holes
Tool Diameter(mm) | Groove Length(mm) | work material | Shank Type | Coating Y/N | Groove Shape | Base Blade Y/N | Tip diameter | Large End Diameter | radius R | Both square |
---|---|---|---|---|---|---|---|---|---|---|
0.4 ~ 5.995 | 0.5 ~ 34 | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | End Mill Shank | NA | Straight | Available | - | - | - | - |
Days to Ship: Số ngày giao hàng: 8 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Long / Corner C Model
MISUMI
[Features]·Since it has end flute, it can simultaneously correct the curvature of the hole with the milling function and improve the surface roughness with the burnishing function·Direct reaming is possible without correction by an end mill after drilling a pilot hole·Long type allows machining of deep holes
Tool Diameter(mm) | Groove Length(mm) | work material | Shank Type | Coating Y/N | Groove Shape | Base Blade Y/N | Tip diameter | Large End Diameter | radius R | Both square |
---|---|---|---|---|---|---|---|---|---|---|
0.4 ~ 5.995 | 0.5 ~ 34 | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | End Mill Shank | NA | Straight | Available | - | - | - | - |
Days to Ship: Số ngày giao hàng: 8 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Spiral Reamer with Carbide Bottom Blade
MISUMI
[Features]·Since it has end flute, it can simultaneously correct the curvature of the hole with the milling function and improve the surface roughness with the burnishing function·Direct reaming is possible without correction by an end mill after drilling a pilot hole·Even higher speed cutting is possible by adopting helical flutes
Tool Diameter(mm) | Groove Length(mm) | work material | Shank Type | Coating Y/N | Groove Shape | Base Blade Y/N | Tip diameter | Large End Diameter | radius R | Both square |
---|---|---|---|---|---|---|---|---|---|---|
3 ~ 10.01 | 20 ~ 30 | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | End Mill Shank | NA | Spiral | Available | - | - | - | - |
From: 2,494,140 VND |
---|
Days to Ship: Số ngày giao hàng: 4 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Straight Reamer with Carbide Bottom Blade
MISUMI
[Features]·Since it has end flute, it can simultaneously correct the curvature of the hole with the milling function and improve the surface roughness with the burnishing function·Direct reaming is possible without correction by an end mill after drilling a pilot hole
Tool Diameter(mm) | Groove Length(mm) | work material | Shank Type | Coating Y/N | Groove Shape | Base Blade Y/N | Tip diameter | Large End Diameter | radius R | Both square |
---|---|---|---|---|---|---|---|---|---|---|
3 ~ 10.01 | 27 ~ 40 | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | End Mill Shank | NA | Straight | Available | - | - | - | - |
From: 1,581,436 VND |
---|
Days to Ship: Số ngày giao hàng: 4 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Carbide Straight Reamer, Regular Model
MISUMI
[Features]·Standard carbide straight reamer custom dimensions type·Custom dimensions can be specified in units of 0.01 mm for cutting diameter and 0.5 mm for flute length
Tool Diameter(mm) | Groove Length(mm) | work material | Shank Type | Coating Y/N | Groove Shape | Base Blade Y/N | Tip diameter | Large End Diameter | radius R | Both square |
---|---|---|---|---|---|---|---|---|---|---|
0.3 ~ 15.99 | 0.5 ~ 48 | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | End Mill Shank | NA | Straight | NA | - | - | - | - |
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Carbide Straight Reamer, Long Model
MISUMI
[Features]·Standard carbide straight reamer custom dimensions type·Custom dimensions can be specified in units of 0.01 mm for cutting diameter and 0.5 mm for flute length·Long type allows reaming of deep areas
Tool Diameter(mm) | Groove Length(mm) | work material | Shank Type | Coating Y/N | Groove Shape | Base Blade Y/N | Tip diameter | Large End Diameter | radius R | Both square |
---|---|---|---|---|---|---|---|---|---|---|
0.3 ~ 5.99 | 0.5 ~ 34 | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | End Mill Shank | NA | Straight | NA | - | - | - | - |
Days to Ship: Số ngày giao hàng: 8 Day(s) or more |
You can add up to 6 items per a category to the compare list.
MISUMI
[Features]·High-speed cutting greatly improves efficiency compared to high-speed steel reamers·High-speed cutting is possible by adopting helical flutes
Tool Diameter(mm) | Groove Length(mm) | work material | Shank Type | Coating Y/N | Groove Shape | Base Blade Y/N | Tip diameter | Large End Diameter | radius R | Both square |
---|---|---|---|---|---|---|---|---|---|---|
3 ~ 10 | 25 ~ 40 | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | End Mill Shank | NA | Spiral | NA | - | - | - | - |
From: 1,973,934 VND |
---|
Days to Ship: Số ngày giao hàng: 4 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Carbide Spiral Reamer, High-Precision Tolerance Model
MISUMI
[Features]·Achieves high-precision hole finishing by narrowing the cutting diameter tolerance width·High-speed cutting greatly improves efficiency compared to high-speed steel reamers·The long lifespan allows high-precision machining to be maintained for a long time.·Even higher speed cutting is possible by adopting helical flutes
Tool Diameter(mm) | Groove Length(mm) | work material | Shank Type | Coating Y/N | Groove Shape | Base Blade Y/N | Tip diameter | Large End Diameter | radius R | Both square |
---|---|---|---|---|---|---|---|---|---|---|
1 ~ 13 | 10 ~ 44 | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | End Mill Shank | NA | Spiral | NA | - | - | - | - |
From: 805,106 VND |
---|
Days to Ship: Số ngày giao hàng: 4 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Carbide Precision Straight Reamer
MISUMI
It is capable of finishing holes with clean surface roughness compared to the normal reamer.
Tool Diameter(mm) | Groove Length(mm) | work material | Shank Type | Coating Y/N | Groove Shape | Base Blade Y/N | Tip diameter | Large End Diameter | radius R | Both square |
---|---|---|---|---|---|---|---|---|---|---|
0.5 ~ 5.9 | 3 ~ 10 | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | End Mill Shank | NA | Straight | NA | - | - | - | - |
Days to Ship: Số ngày giao hàng: 8 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Carbide Pilot Hole Correction Boring Bit
MISUMI
In case the hole pitch has an intersection or the inclination tolerance of the hole is demanding. By using it before finishing the reamer, the bend of the hole can be modified.
Tool Diameter(mm) | Groove Length(mm) | work material | Shank Type | Coating Y/N | Groove Shape | Base Blade Y/N | Tip diameter | Large End Diameter | radius R | Both square |
---|---|---|---|---|---|---|---|---|---|---|
1.8 ~ 5 | - | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | End Mill Shank | NA | Straight | NA | - | - | - | - |
Days to Ship: Số ngày giao hàng: 8 Day(s) or more |
You can add up to 6 items per a category to the compare list.
MISUMI
[Features]·Unique cutting edge shape enables drilling of various work materials such as stainless steel and aluminum alloy·Drilling is possible under cutting conditions of 60 m/min or more·Compatible with various applications such as hole finishing and high-precision thread pilot hole drilling·It can be used for hole finishing because it achieves the same dimensional accuracy and surface roughness accuracy as boring and reaming·Ideal for pilot hole drilling of high-precision thread with high percentage of thread engagement·Possesses the ability to correct variations in pilot hole diameters, enabling improved hole position accuracy
Tool Diameter(mm) | Groove Length(mm) | work material | Shank Type | Coating Y/N | Groove Shape | Base Blade Y/N | Tip diameter | Large End Diameter | radius R | Both square |
---|---|---|---|---|---|---|---|---|---|---|
2 ~ 10 | 12 ~ 52 | general steel[○] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] | End Mill Shank | Available | Straight | NA | - | - | - | - |
From: 2,860,723 VND |
---|
Days to Ship: Số ngày giao hàng: 4 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Carbide Step Reamer, Custom Dimensions / Long Shank Type
MISUMI
[Features]·2-stage hole drilling in 2 processes can be performed with 1 tool while keeping the coaxial·Large diameter can also be specified in addition to tip diameter, stepped length, and chamfer angle·Machining according to the shape of product, such as parts machining, is possible
Tool Diameter(mm) | Groove Length(mm) | work material | Shank Type | Coating Y/N | Groove Shape | Base Blade Y/N | Tip diameter | Large End Diameter | radius R | Both square |
---|---|---|---|---|---|---|---|---|---|---|
- | - | general steel[◎] / Aluminum[◎] | End Mill Shank | NA | Straight | - | - | - | - | - |
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Coated Solid Spiral Reamer CSPR-C
EIKOSHA
Carbide spiral reamer with high versatility and excellent wear resistance.[Features]· Features TiCN coating that prevents welding and improves roughness of the finishing surface.· Uses a twisted blade with excellent chip discharge performance.[Applications]· Ideal for machining a wide range of work materials from nonferrous metal to carbon steel.
Tool Diameter(mm) | Groove Length(mm) | work material | Shank Type | Coating Y/N | Groove Shape | Base Blade Y/N | Tip diameter | Large End Diameter | radius R | Both square |
---|---|---|---|---|---|---|---|---|---|---|
0.8 ~ 12.05 | 15 ~ 45 | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Die Steel[○] / Heat-resistant alloy[○] / Alloy Steel[◎] | End Mill Shank | Available | Spiral | NA | - | - | - | - |
From: 1,403,330 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
DLC Carbide Solid Reamer for Aluminum CSR-DLC
EIKOSHA
DLC coating with low coefficient of friction adopted, for aluminum and nonferrous metals
Tool Diameter(mm) | Groove Length(mm) | work material | Shank Type | Coating Y/N | Groove Shape | Base Blade Y/N | Tip diameter | Large End Diameter | radius R | Both square |
---|---|---|---|---|---|---|---|---|---|---|
0.5 ~ 12.05 | 6 ~ 45 | Cast Iron[○] / Aluminum[◎] / Copper[◎] / Die Steel[○] / Alloy Steel[○] | End Mill Shank | Available | Straight | NA | - | - | - | - |
From: 2,180,046 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Carbide Reamer CE Series (formerly SH Series)
FPTOOLS
Complete blind hole drilling is possible. Newly developed special blade coating. End mill shank is adopted.* Product name was changed from SH to CE. Although there is no change in the standards and price, the label of the delivered product may be that of the former SH series.
Tool Diameter(mm) | Groove Length(mm) | work material | Shank Type | Coating Y/N | Groove Shape | Base Blade Y/N | Tip diameter | Large End Diameter | radius R | Both square |
---|---|---|---|---|---|---|---|---|---|---|
1 ~ 14.05 | 5 ~ 30 | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[◎] / Alloy Steel[◎] | End Mill Shank | Available | Spiral | Available | - | - | 1 ~ 2.5 | - |
From: 2,469,617 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
BrandNhãn hiệu |
---|
Product SeriesDòng sản phẩm |
From |
Days to ShipSố ngày giao hàng |
Tool Diameter(mm) |
Groove Length(mm) |
work material |
Shank Type |
Coating Y/N |
Groove Shape |
Base Blade Y/N |
Tip diameter |
Large End Diameter |
radius R |
Both square |
You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | |
BrandNhãn hiệu | FPTOOLS | FPTOOLS | OSG | FPTOOLS | FPTOOLS | FPTOOLS | TRUSCO NAKAYAMA | FPTOOLS | EIKOSHA | EIKOSHA | MISUMI | OKAZAKI SEIKO | MISUMI | FPTOOLS | FPTOOLS | MISUMI | MISUMI | MISUMI | MISUMI | EIKOSHA | EIKOSHA | FPTOOLS | EIKOSHA | EIKOSHA | OKAZAKI SEIKO | EIKOSHA | EIKOSHA | EIKOSHA | FPTOOLS | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | EIKOSHA | EIKOSHA | FPTOOLS |
Product SeriesDòng sản phẩm | Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Regular Model | Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Regular / Corner Radius Model | Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Regular / Corner C Model | Carbide Straight Reamer, Non-Coated / TS Coat for High-Hardness Steel Machining | Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Long Model | Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Long / Corner Radius Model | Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Long / Corner C Model | ||||||||||||||||||||||||||||||||||||||
From | 1,247,050 VND | 519,142 VND | 970,000 VND | 575,994 VND Special Price On Sale Till 31/03/2025 | 722,944 VND | 592,519 VND | 909,406 VND | 1,694,871 VND | 527,011 VND Special Price On Sale Till 31/03/2025 | 1,351,933 VND | 1,490,738 VND | 534,026 VND | 1,809,820 VND | 1,170,874 VND | 829,294 VND | 1,757,886 VND | 2,209,180 VND | 2,087,665 VND | 2,427,913 VND | 889,268 VND | 1,968,833 VND | 2,191,390 VND | 2,147,784 VND | 4,864,710 VND | 1,962,348 VND | 2,494,140 VND | 1,581,436 VND | 1,973,934 VND | 805,106 VND | 2,860,723 VND | 1,403,330 VND | 2,180,046 VND | 2,469,617 VND | ||||||||||||
Days to ShipSố ngày giao hàng | 6 Day(s) or more | Same day or more | 6 Day(s) or more | Same day or more | 6 Day(s) or more | 6 Day(s) or more | 9 Day(s) | 6 Day(s) or more | Same day or more | 6 Day(s) or more | 6 Day(s) or more | 10 Day(s) or more | 4 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 4 Day(s) or more | 6 Day(s) or more | Same day or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 10 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 6 Day(s) or more | 8 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 4 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more |
Tool Diameter(mm) | 0.5 ~ 10.009 | 0.2 ~ 12.1 | 0.3 ~ 13.05 | 0.3 ~ 2.895 | 2.91 ~ 12.1 | 1 ~ 14.05 | 2.1 ~ 2.9 | 1 ~ 12.1 | 0.56 ~ 3 | 0.8 ~ 12.05 | 0.3 ~ 15.995 | 2.95 ~ 12.05 | 1 ~ 13 | 1 ~ 15.5 | 1 ~ 12.095 | 0.4 ~ 15.995 | 0.4 ~ 15.995 | 1 ~ 10 | - | 0.5 ~ 12.05 | - | 2.95 ~ 12.005 | 15.02 ~ 16.05 | 2.01 ~ 2.7 | 3 ~ 12 | 1 ~ 12.055 | - | 2.97 ~ 20.03 | 2.985 ~ 10.025 | 0.3 ~ 5.995 | 0.4 ~ 5.995 | 0.4 ~ 5.995 | 3 ~ 10.01 | 3 ~ 10.01 | 0.3 ~ 15.99 | 0.3 ~ 5.99 | 3 ~ 10 | 1 ~ 13 | 0.5 ~ 5.9 | 1.8 ~ 5 | 2 ~ 10 | - | 0.8 ~ 12.05 | 0.5 ~ 12.05 | 1 ~ 14.05 |
Groove Length(mm) | 5 ~ 40 | 3 ~ 45 | - | 7 ~ 35 | 20 ~ 25 | 20 ~ 85 | - | 15 ~ 65 | 12 ~ 40 | 12 ~ 45 | 0.5 ~ 48 | 20 ~ 31 | 15 ~ 44 | 8 ~ 45 | 12 ~ 30 | 0.5 ~ 48 | 0.5 ~ 48 | 12 ~ 40 | - | 6 ~ 45 | 60 ~ 160 | 15 ~ 40 | 45 | 30 ~ 35 | 20 ~ 31 | 5 ~ 30 | 60 ~ 160 | 19 ~ 25 | 12 ~ 24 | 0.5 ~ 34 | 0.5 ~ 34 | 0.5 ~ 34 | 20 ~ 30 | 27 ~ 40 | 0.5 ~ 48 | 0.5 ~ 34 | 25 ~ 40 | 10 ~ 44 | 3 ~ 10 | - | 12 ~ 52 | - | 15 ~ 45 | 6 ~ 45 | 5 ~ 30 |
work material | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] / Resin[○] / Die Steel[◎] / Alloy Steel[◎] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] / Resin[○] / Die Steel[◎] / Alloy Steel[◎] | general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / Aluminum[○] / Copper[○] / Resin[○] / Die Steel[○] / Alloy Steel[○] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] / Resin[○] / Die Steel[◎] / Alloy Steel[◎] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] / Resin[○] / Die Steel[○] / Alloy Steel[○] | general steel[○] / Stainless Steel[○] / Cast Iron[○] | Quenched and tempered steel[◎] | general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[○] / Alloy Steel[○] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Die Steel[◎] / Heat-resistant alloy[○] / Alloy Steel[◎] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Alloy Steel[○] | general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[○] / Cast Iron[◎] / Resin[○] / Die Steel[○] / Alloy Steel[◎] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[○] / Alloy Steel[◎] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○/◎] / Quenched and tempered steel[○/◎] / high hardness steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Aluminum[◎] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Die Steel[○] / Heat-resistant alloy[○] / Alloy Steel[○] | general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Alloy Steel[○] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[◎] / Alloy Steel[◎] | Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Copper[◎] / Die Steel[○] / Heat-resistant alloy[○] / Alloy Steel[○] | general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[○] / Alloy Steel[○] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[◎] / Alloy Steel[◎] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] / Die Steel[◎] / Heat-resistant alloy[○] / Alloy Steel[◎] | general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Alloy Steel[○] | general steel[○] / Quenched and tempered steel[○] / Aluminum[○] / Copper[○] / Alloy Steel[○] | Stainless Steel[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] | general steel[◎] / Aluminum[◎] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Die Steel[○] / Heat-resistant alloy[○] / Alloy Steel[◎] | Cast Iron[○] / Aluminum[◎] / Copper[◎] / Die Steel[○] / Alloy Steel[○] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[◎] / Alloy Steel[◎] |
Shank Type | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank |
Coating Y/N | NA | NA | NA | NA | NA | Available | NA | Available | NA | Available | NA | NA | NA | NA | Available | NA | NA | Available ~ NA | NA | Available | NA | Available | NA | NA | NA | Available | NA | Available | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | Available | NA | Available | Available | Available |
Groove Shape | Straight | Straight | Straight | Straight | Straight | Straight | Spiral | Spiral | Straight | Straight | Straight | Helical | Spiral | Spiral | Spiral | Straight | Straight | Straight | Straight | Spiral | Spiral | Spiral | Helical | Spiral | Spiral | Spiral | Straight | Straight | Straight | Straight | Straight | Straight | Spiral | Straight | Straight | Straight | Spiral | Spiral | Straight | Straight | Straight | Straight | Spiral | Straight | Spiral |
Base Blade Y/N | NA | NA | NA | NA | NA | NA | - | NA | NA | NA | Available | NA | NA | NA | NA | Available | Available | NA | - | NA | NA | NA | NA | NA | Available | Available | NA | NA | NA | Available | Available | Available | Available | Available | NA | NA | NA | NA | NA | NA | NA | - | NA | NA | Available |
Tip diameter | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 2 ~ 10 | - | - | - | - | - | 1 ~ 5 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Large End Diameter | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 3.04 ~ 37.99 | - | - | - | - | - | 2.04 ~ 32.99 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
radius R | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 1 ~ 2.5 |
Both square | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 1 ~ 10 | - | - | - | - | - | 1゚ ~ 10゚ | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...Tải…
[1.8-5/0.1mm Unit(s)][0.3-15.99/0.01mm Unit(s)][0.3-15.995/0.005mm Unit(s)]
[0.5-48/0.5mm Unit(s)][3-10/1mm Unit(s)]
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy