(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.
Tel: 0222-361-1555
Email: cs@misumi.com.vn
8:00 - 17:00 (Mon - Sat)
Search by Category / Brand Tìm theo danh mục, nhãn hiệu
Search by Category Tìm theo danh mục
- Thể lệ và Giải thưởng cuộc thi "Thiết kế máy Tự động hóa 2025" do MISUMI Việt Nam tổ chức. Xem chi tiết.
- [Thông báo] Cập nhật địa chỉ kho tập kết hàng hóa tại khu vực miền Nam của MISUMI Việt Nam. Xem chi tiết.
[Announcement] Update on warehouse address in the Southern region of MISUIMI Vietnam. See more.
Straight Shank / End Mill Shank Drills (Carbide)（work material：Titanium）
Brand |
|
|---|---|
| CAD |
|
| Days to Ship |
|
62 itemsMặt hàng
- Sort By
-
You can add up to 6 items per a category to the compare list.
NSMD-MS MUGEN Micro Coating Micro Drill Short
NS TOOL
[Features]・ Short type with groove length 6 times the cutting diameter.・ By adopting a thin film coating dedicated for micro drill bits, it demonstrates excellent performance for drilling holes in stainless steel, etc.・ Uses thinning on the tip to reduce cutting force. Stable drilling precision. (ø0.02 or more)
Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 0.01 ～ 0.05 40 0.06 ～ 0.3 Titanium[◎] End Mill Shank Carbide NA Available TiAlN From: 2,384,241 VND Days to Ship: Số ngày giao hàng: 9 Day(s) 
9 Day(s)
-
You can add up to 6 items per a category to the compare list.
Carbide Drill with Internal Coolant Supply (3D Type)_ADO-3D
OSG
[Features]· Carbide 3D type drill with both high blade tip rigidity and good cutting resistance. Recommended for use on a wide range of materials. Uses an EgiAs coating which boasts excellent wear resistance and toughness, helping achieve a longer tool life. Wide flutes for improved chip discharging Wave-shaped flutes that finely fragment the chips
Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 2 ～ 20 66 ～ 165 12 ～ 100 Titanium[○] End Mill Shank Carbide Available Available Other From: 1,567,470 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
NACHI(FUJIKOSHI)
A drill that is difficult to break and stable for machining.[Features]· Employs cemented carbide ideal for small diameter hole drilling.· A drill with high rigidity is used.· The cutting load has been reduced by circumferential clearance and thinning.[Applications]· Hard to break and capable of stable processing thanks to the high-rigidity shape and the use of carbide alloy ideal for small diameter drilling work.
Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 0.2 ～ 1.99 38 ～ 47 2.5 ～ 15 Titanium[○] End Mill Shank Carbide NA Available Other From: 544,333 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Carbide Drill with Internal Coolant Supply (3D Type)_ADO-SUS-3D
OSG
[Features]· Has a blade shape designed for sharpness and uses a "MEGA COOLER" oil hole, enabling stable machining and a longer service life, even when used for high efficiency work. 3D type with oil hole
Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 2.8 ～ 20 66 ～ 165 17 ～ 100 Titanium[◎] End Mill Shank / straight shank Carbide Available Available Other From: 1,878,788 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Aqua Drill EX Oil Hole 3D AQDEXOH3D
NACHI(FUJIKOSHI)
Aqua Drill EX series solid carbide drills with internal coolant.[Features]· Aqua Drill EX based new flute shape adopted to achieve excellent chipping breakup.· Aqua EX coating achieves stable long life.[Applications]· Stable processing of mild steel to high hardness materials.
Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 3 ～ 16 68 ～ 146 17 ～ 80 Titanium[○] End Mill Shank / straight shank Carbide Available Available Other From: 2,391,126 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
C-UMD, Micro Coat, 2-Flute UNIMAX Drill Bit
UNION TOOL
[Features]·UT microcoating.·Tip angle 150·Tool Material: Carbide
Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 0.11 ～ 2.95 38 1.2 ～ 12 Titanium[○] End Mill Shank Carbide NA Available Other From: 521,503 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Carbide Drill with Internal Coolant Supply (5D Type)_ADO-5D
OSG
[Features]· Carbide 5D type drill with both high blade tip rigidity and good cutting resistance. Recommended for use on a wide range of materials. Uses an EgiAs coating which boasts excellent wear resistance and toughness, helping achieve a longer tool life. Wide flutes for improved chip discharging Wave-shaped flutes that finely fragment the chips
Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 2 ～ 20 70 ～ 225 18 ～ 160 Titanium[○] End Mill Shank Carbide Available Available Other From: 2,322,975 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
NS TOOL
[Features]· MUGEN flat drill bit makes drilling holes in inclined or curved surfaces easy.・ The thinning shape developed according to the size (spiral thinning (ø1 to ø2.9)/triple thinning (ø3 to ø6)), double margin (ø2.6 or more), and long neck shape ensure stable and accurate drilling operations.· MFD has a flat bottom flute that flattens out the bottoms of blind holes and is ideal for counterbore machining and thread cutting (thread milling) pilot holes.· Through-holes can be drilled without the generation of burrs.· It adopts a reliable MUGEN coating to support a range of work material from mild steel to stainless steel.· It reduces drilling process time and improve machining efficiency with this 1 tool.・ Stable drilling is possible regardless of the shape of the machined surface such as slopes and curved surfaces.・ High efficiency counter boring is possible.・ Back burr can be suppressed.
Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 1 ～ 1.9 55 2 ～ 11.8 Titanium[○] End Mill Shank Carbide NA Available TiAlN From: 997,254 VND Days to Ship: Số ngày giao hàng: 9 Day(s)
9 Day(s)
-
You can add up to 6 items per a category to the compare list.
Aqua Drill EX Oil Hole 5D AQDEXOH5D
NACHI(FUJIKOSHI)
Aqua Drill EX series solid carbide drills with internal coolant.[Features]· Product lineup is for 3D, 5D and 8D boring depths.· Aqua Drill EX based new flute shape adopted to achieve excellent chipping breakup.· Aqua EX coating achieves stable long life.· Capable of stable wet processing and MQL processing.· For highly-efficient hole drilling up to 5 times the drill diameter.[Applications]· Ideal for stable processing of mild steel to high hardness materials, as well as work materials with difficult chip processing.
Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 1 ～ 16 56 ～ 194 8 ～ 128 Titanium[○] End Mill Shank / straight shank Carbide Available Available Other From: 2,785,966 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Aqua Drill EX Oil Hole 8D AQDEXOH8D
NACHI(FUJIKOSHI)
Aqua Drill EX series solid carbide drills with internal coolant.[Features]· Product lineup is for 3D, 5D and 8D boring depths.· Aqua Drill EX based new flute shape adopted to achieve excellent chipping breakup.· Aqua EX coating achieves stable long life.[Applications]· Stable processing of mild steel to high hardness materials.
Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 3 ～ 16 81 ～ 242 33 ～ 176 Titanium[○] End Mill Shank / straight shank Carbide Available Available Other From: 3,347,773 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
GP Drill Bit, Regular 10D, ALT Coating
IWATA TOOL
Allows non-step boring up to 3D hole depth (up to 7D in some situations). High precision and super long life.
Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 0.3 ～ 3 40 ～ 60 3.7 ～ 36.5 Titanium[○] End Mill Shank Carbide NA Available TiAlN From: 786,878 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Solid Carbide Ultra Small Size UVM Drills (5D Type)_UVM-DRL-5D
OSG
Ultra-small diameter UVM drill 5D type to achieve drilling with a minimum diameter of ø0.02.
Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 0.02 ～ 0.08 38 0.12 ～ 0.48 Titanium[○] End Mill Shank Carbide NA Available Other From: 2,781,953 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
End Mill Shank Drill 3 × D, with Oil Hole RT100U 5510
GUHRING
[Features]· Internal lubrication enables high performance drilling without steps.
Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 3 ～ 20 62 ～ 131 20 ～ 79 Titanium[○] End Mill Shank Carbide Available Available Other From: 2,128,309 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
End Mill Shank Type 5xD RT100U 5515
GUHRING
[Features]· Supports a wide range of machining and enables high-efficiency, high-speed machining.
Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 3 ～ 20 66 ～ 153 28 ～ 101 Titanium[○] End Mill Shank Carbide NA Available Other From: 1,907,196 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Carbide Drill with Internal Coolant Supply (5D Type)_ADO-SUS-5D
OSG
[Features]· Has a blade shape designed for sharpness and uses a "MEGA COOLER" oil hole, enabling stable machining and a longer service life, even when used for high efficiency work. 5D type with oil hole
Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 2 ～ 20 70 ～ 205 18 ～ 140 Titanium[◎] End Mill Shank / straight shank Carbide Available Available Other From: 2,186,243 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
End Mill Shank Drill 5 × D with Oil Hole RT100U 5511
GUHRING
[Features]· Internal lubrication enables high performance drilling without steps.
Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 3 ～ 20 66 ～ 153 28 ～ 101 Titanium[○] End Mill Shank Carbide Available Available Other From: 2,714,500 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
UTDSX UT, Micro Coating Unimax Short Flute Drill Bit
UNION TOOL
[Features]· Coated carbide drill for mass-produced parts and prototype parts, balancing performance and cost.· Adopts a newly developed UT micro-coating that demonstrates high performance for soft materials· The newly designed drill shape and X-thinning provide improved impact fracture resistance and reduced variation when drilling multiple holes· The tip angle is set to 130° to suppress the burr height in through holes· A high rigidity short blade is optimal for high precision machining and also for pilot hole processing
Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 0.3 ～ 2 38 1.5 ～ 10 Titanium[○] End Mill Shank Carbide NA Available TiCN From: 473,504 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
NSPD-M MUGEN Micro Coating Micro Point Drill (for Pilot Hole Machining)
NS TOOL
With thin film coating dedicated for micro drills, it shows excellent performance when drilling stainless steel, etc.
Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 0.01 ～ 0.1 40 0.015 ～ 0.2 Titanium[◎] End Mill Shank Carbide NA Available TiAlN From: 1,228,120 VND Days to Ship: Số ngày giao hàng: 9 Day(s)
9 Day(s)
-
You can add up to 6 items per a category to the compare list.
Straight Shank Drill, 5 × D Type N 2464
GUHRING
[Features]· Highly versatile carbide solid drill.· Supports various workpiece materials such as aluminum or general steel.· FIRE coating achieves longer life.
Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 1 ～ 12 34 ～ 151 12 ～ 101 Titanium[○] straight shank Carbide NA Available Other From: 729,632 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
CoroDrill Delta-C, Carbide Solid Drill
SANDVIK
Solid drill providing high accuracy surface roughness ideal for drilling any kind of workpiece.
Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 13 ～ 14.5 124 ～ 133 56 ～ 59 Titanium[○] End Mill Shank Carbide Available Available TiAlN From: 11,556,586 VND Days to Ship: Số ngày giao hàng: 9 Day(s)
9 Day(s)
-
You can add up to 6 items per a category to the compare list.
Top Solid Tapered Shank Twist Drill DTD
DIJET
[Features]· It is a tool with excellent abrasion resistance.
Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 6 ～ 30 148 ～ 305 68 ～ 188 Titanium[○] Taper shank Carbide NA NA Non-Coated From: 5,820,250 VND Days to Ship: Số ngày giao hàng: 8 Day(s) or more
8 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Carbide 2-Flute Leading Drill 142° D924X
7 LEADERS
[Features]· 142° Leading Drill· Use for centering machining for tip angle 140°drill.· Nanoparticle Multilayer Coating· Excellent lubricity and abrasion resistance.· Exhibits its strength in general cutting processes.
Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 0.5 ～ 20 38 ～ 130 1 ～ 40 Titanium[○] End Mill Shank Carbide - - Other From: 612,526 VND Days to Ship: Số ngày giao hàng: 7 Day(s) or more
7 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
VariDrill Solid Carbide Drill 8xD VDS403A
WIDIA
WIDIA Straight Shank, End Mill Shank Drill (Carbide) VariDrill Solid Carbide Drill 8xD VDS403A.
Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 1.5 ～ 20 58 ～ 200 18 ～ 148 Titanium[○] End Mill Shank Carbide Available Available TiAlN From: 3,716,140 VND Days to Ship: Số ngày giao hàng: 7 Day(s) or more
7 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Solid Carbide Ultra Small Size UVM Drills (10D Type)_UVM-DRL-10D
OSG
Because it uses carbide materials, it has both high hardness and elastic modulus, making it possible to drill extremely small holes in general steel, heat-treated steel, and high hardness steel.
Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 0.02 ～ 0.08 38 0.22 ～ 0.88 Titanium[○] End Mill Shank Carbide NA Available Other From: 3,279,970 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Solid Carbide Ultra Small Size UVM Drills (Starting Drills)_UVM-LDS
OSG
Supports high-precision drilling in collaboration with UVM-DRL.
Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 0.05 38 0.075 Titanium[○] End Mill Shank Carbide NA Available Other From: 6,248,145 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
UTDLX UT, Micro Coating Unimax Long Blade Drill Bit
UNION TOOL
[Features]· Coated carbide drill for mass-produced parts and prototype parts, balancing performance and cost.· Adopts a newly developed UT micro-coating that demonstrates high performance for soft materials· The newly designed drill shape and X-thinning provide improved impact fracture resistance (durability performance) and reduced variation when drilling multiple holes· The tip angle is set to 130° to suppress the burr height in through holes· Groove length 15 times larger than the diameter enables highly precise drilling of deep holes.
Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 0.3 ～ 3 38 ～ 80 4.5 ～ 45 Titanium[○] End Mill Shank Carbide NA Available Other From: 848,058 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
NSPD Micro Point Drill (Pilot Hole Machining)
NS TOOL
[Features]・ Supports pilot hole machining with micro drill bits.・ Uses thinning on the tip to reduce cutting force. Stable drilling precision. (ø0.025 or more)
Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 0.01 ～ 0.1 40 0.015 ～ 0.2 Titanium[○] End Mill Shank Carbide NA NA - From: 974,335 VND Days to Ship: Số ngày giao hàng: 8 Day(s) or more
8 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
NS TOOL
[Features]・ Achieved standardization from tip diameter ø0.01.・ Pioneering a new area of drilling with a drill bit.・ Uses thinning on the tip to reduce cutting force. Stable drilling precision. (ø0.02 or more)・ A standard type with a groove length that is 10 times the cutting diameter.
Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 0.01 ～ 0.1 40 0.1 ～ 1 Titanium[○] End Mill Shank Carbide NA Available TiAlN From: 939,139 VND Days to Ship: Số ngày giao hàng: 8 Day(s) or more
8 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
NS TOOL
[Features]・ A short type with a groove length that is 6 times the cutting diameter for stable machining. Uses thinning on the tip to reduce cutting force.・ Stable drilling precision. (ø0.02 or more)
Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 0.01 ～ 0.05 40 0.06 ～ 0.3 Titanium[○] End Mill Shank Carbide NA NA - From: 2,203,652 VND Days to Ship: Số ngày giao hàng: 9 Day(s)
9 Day(s)
-
You can add up to 6 items per a category to the compare list.
MSDH Drill for Small Diameter High-Hardness Processing
NS TOOL
[Features]・ Drilling of hardened steel 65 HRC is possible with a small diameter drill bit.・ Achieves stable lifespan with little variation in hole diameter.・ High hardness material drilling is possible from ø0.1.
Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 0.1 ～ 1 45 0.2 ～ 2 Titanium[◎] End Mill Shank Carbide NA Available TiAlN From: 1,157,606 VND Days to Ship: Số ngày giao hàng: 9 Day(s)
9 Day(s)
-
You can add up to 6 items per a category to the compare list.
NSMD-M MUGEN Micro Coating Micro Drill
NS TOOL
[Features]・ A standard type with a groove length that is 10 times the cutting diameter.・ By adopting a thin film coating dedicated for micro drill bits, it demonstrates excellent performance for drilling holes in stainless steel, etc.・ Uses thinning on the tip to reduce cutting force. Stable drilling precision. (ø0.02 or more)
Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 0.01 ～ 0.1 40 0.1 ～ 1 Titanium[◎] End Mill Shank Carbide NA Available TiAlN From: 1,228,120 VND Days to Ship: Số ngày giao hàng: 8 Day(s) or more
8 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
MUGEN-COATING Miniature Drill MDR-R
NS TOOL
[Features]・ MUGEN coating is used to achieve long lifespan and stable drilling.・ High-precision specifications suitable for precision part machining. Diameter tolerance 0 to -0.005 mm
Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type .0.4 ～ 1 38 1.2 ～ 10 Titanium[○] End Mill Shank Carbide - Available TiAlN From: 559,863 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
MUGEN-COATING Point Drill (for Pilot Hole Machining) MDR-PD
NS TOOL
[Features]・ MUGEN miniature drill pilot hole drill. Can also be used for drilling thin plates.・ The use of thinning improves hole position precision and enables stable drilling.
Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 0.1 ～ 1 38 0.2 ～ 2 Titanium[○] End Mill Shank Carbide - Available TiAlN From: 1,174,022 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
PHP Carbide Drill, Phoenix Drill
OSG
An indexable drill with excellent cutting chip discharge and high machining efficiency. Cost-effective with 4-corner type insert.
Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 14 ～ 40 116 ～ 227 42 ～ 120 Titanium[○] End Mill Shank / straight shank Carbide NA NA Non-Coated From: 13,474,110 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
IWATA TOOL
[Features]· Taking on ultra-high speed machining.· 0.25 seconds per hole, lifetime of 20,000 or more holes.· Allows non-step boring up to 3D hole depth (up to 7D in some situations).· High precision and super long life.
Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 0.3 ～ 3 40 ～ 60 1.9 ～ 18.5 Titanium[○] End Mill Shank Carbide NA Available TiAlN From: 692,649 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
TFD Carbide TiCN Coated Drill Bit
IWATA TOOL
Highly circular, not requiring a reamer bit after drilling. Capable of high-efficiency and high-precision machining thanks to its high-rigidity groove shape and stub groove length. Ideal for drilling tap pilot holes.
Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 0.3 ～ 3 50 1.8 ～ 16.8 Titanium[○] End Mill Shank Carbide NA Available TiCN From: 1,163,793 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Twisted Crescent Drill Bit Carbide
IWATA TOOL
Ideal for aluminum, brass, and resin. The high torsion design dramatically reduces burrs. Compared to conventional crescent drills, chipping discharge, cutting performance and life have been greatly improved. 1-flute design provides outstanding machining precision.
Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 0.1 ～ 3 50 0.6 ～ 16.8 Titanium[○] End Mill Shank Carbide NA NA Non-Coated From: 786,878 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Twisted Crescent Drill Bit Carbide DLC Coated
IWATA TOOL
Ideal for aluminum, brass, and resin. The high torsion design dramatically reduces burrs. Compared to conventional crescent drills, chipping discharge, cutting performance and life have been greatly improved. 1-flute design provides outstanding machining precision.
Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 0.1 ～ 3 50 0.6 ～ 16.8 Titanium[○] End Mill Shank Carbide NA Available DLC From: 1,352,250 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Super Multi-Drill Internal Refueling, HGS-Model 8D-Type
SUMITOMO ELECTRIC HARDMETAL
A solid carbide drill bit that uses a new flute shape to enable excellent cutting chip discharge and ejection with a wide chip gullet.By applying DEX coat, stable long lifespan is realized in various work materials and wide cutting area.[Features]・ A long lifespan is achieved for various work materials by combining the new flute type and the dedicated coating "DEX Coat."・ Achieves stable drilling with little vibration even in small machines.・ Also supports MQL (Minimum Quantity Lubrication).
Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 2.8 81 33 Titanium[◎] End Mill Shank Carbide Available Available For High Hardness (Silicon Group) From: 3,446,085 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Super Multi-Drill Internal Refueling, HGS-Model 5D-Type
SUMITOMO ELECTRIC HARDMETAL
A solid carbide drill bit that uses a new flute shape to enable excellent cutting chip discharge and ejection with a wide chip gullet.By applying DEX coat, stable long lifespan is realized in various work materials and wide cutting area.[Features]・ A long lifespan is achieved for various work materials by combining the new flute type and the dedicated coating "DEX Coat."・ Achieves stable drilling with little vibration even in small machines.・ Also supports MQL (Minimum Quantity Lubrication).
Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 7 109 56 Titanium[◎] straight shank Carbide Available Available For High Hardness (Silicon Group) From: 3,466,800 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
OK Coat Carbide NC Point Drill SNPDA
OKAZAKI SEIKO
A point drill bit optimal for chamfering or positioning when drilling.
Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 3 ～ 12 50 ～ 110 8 ～ 30 Titanium[○] straight shank Carbide NA Available TiAlN From: 776,255 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
DIJET
It is a tool with excellent abrasion resistance.
Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 11.1 ～ 15.9 122 ～ 146 58 ～ 80 Titanium[○] End Mill Shank Carbide Available Available TiCN From: 6,433,806 VND Days to Ship: Số ngày giao hàng: 8 Day(s) or more
8 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
DIJET
It can handle a wide range of materials, from general steel to stainless steel and heat-resistant alloys, and has a structure that allows for smooth cutting chip discharge and easy regrinding.
Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 11.1 ～ 15.9 158 ～ 194 92 ～ 128 Titanium[○] End Mill Shank Carbide Available Available TiCN From: 7,354,138 VND Days to Ship: Số ngày giao hàng: 8 Day(s) or more
8 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
EZ Drill for Heat Resistant Alloy (for 3D) EZSM Type for Drilling
DIJET
It is a tool with excellent abrasion resistance.
Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 3 ～ 12 68 ～ 122 15 ～ 60 Titanium[◎] End Mill Shank / straight shank Carbide Available Available - From: 2,400,275 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
End Mill Shank Type 3 x D RT100U 5514
GUHRING
[Features]· Supports a wide range of machining and enables high-efficiency, high-speed machining.
Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 3 ～ 20 62 ～ 131 20 ～ 79 Titanium[○] End Mill Shank Carbide NA Available Other From: 1,631,592 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
| BrandNhãn hiệu |
|---|
| Product SeriesDòng sản phẩm |
| From |
| Days to ShipSố ngày giao hàng |
| Hole diameter (drill diameter) D(mm) |
| Overall Length L(mm) |
| Groove Length L(mm) |
| work material |
| Shank Type |
| Tool Material Type |
| With/without Oil Hole |
| Coating Y/N |
| Coating Type |
You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | |
| BrandNhãn hiệu | NS TOOL | OSG | NACHI(FUJIKOSHI) | OSG | NACHI(FUJIKOSHI) | UNION TOOL | OSG | NS TOOL | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | IWATA TOOL | OSG | GUHRING | GUHRING | OSG | GUHRING | UNION TOOL | NS TOOL | GUHRING | SANDVIK | DIJET | 7 LEADERS | WIDIA | OSG | OSG | UNION TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | OSG | IWATA TOOL | IWATA TOOL | IWATA TOOL | IWATA TOOL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | OKAZAKI SEIKO | DIJET | DIJET | DIJET | GUHRING |
| Product SeriesDòng sản phẩm | Carbide Drill with Internal Coolant Supply (3D Type)_ADO-SUS-3D | Solid Carbide Ultra Small Size UVM Drills (5D Type)_UVM-DRL-5D | Carbide Drill with Internal Coolant Supply (5D Type)_ADO-SUS-5D | NSPD-M MUGEN Micro Coating Micro Point Drill (for Pilot Hole Machining) | Solid Carbide Ultra Small Size UVM Drills (10D Type)_UVM-DRL-10D | Solid Carbide Ultra Small Size UVM Drills (Starting Drills)_UVM-LDS | EZ Drill for Heat Resistant Alloy (for 3D) EZSM Type for Drilling | ||||||||||||||||||||||||||||||||||||||
| From | 2,384,241 VND | 1,567,470 VND | 544,333 VND | 1,878,788 VND | 2,391,126 VND | 521,503 VND | 2,322,975 VND | 997,254 VND | 2,785,966 VND | 3,347,773 VND | 786,878 VND | 2,781,953 VND | 2,128,309 VND | 1,907,196 VND | 2,186,243 VND | 2,714,500 VND | 473,504 VND | 1,228,120 VND | 729,632 VND | 11,556,586 VND | 5,820,250 VND | 612,526 VND | 3,716,140 VND | 3,279,970 VND | 6,248,145 VND | 848,058 VND | 974,335 VND | 939,139 VND | 2,203,652 VND | 1,157,606 VND | 1,228,120 VND | 559,863 VND | 1,174,022 VND | 13,474,110 VND | 692,649 VND | 1,163,793 VND | 786,878 VND | 1,352,250 VND | 3,446,085 VND | 3,466,800 VND | 776,255 VND | 6,433,806 VND | 7,354,138 VND | 2,400,275 VND | 1,631,592 VND |
| Days to ShipSố ngày giao hàng | 9 Day(s) | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 9 Day(s) | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 9 Day(s) | 6 Day(s) or more | 9 Day(s) | 8 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 9 Day(s) | 9 Day(s) | 8 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more |
| Hole diameter (drill diameter) D(mm) | 0.01 ～ 0.05 | 2 ～ 20 | 0.2 ～ 1.99 | 2.8 ～ 20 | 3 ～ 16 | 0.11 ～ 2.95 | 2 ～ 20 | 1 ～ 1.9 | 1 ～ 16 | 3 ～ 16 | 0.3 ～ 3 | 0.02 ～ 0.08 | 3 ～ 20 | 3 ～ 20 | 2 ～ 20 | 3 ～ 20 | 0.3 ～ 2 | 0.01 ～ 0.1 | 1 ～ 12 | 13 ～ 14.5 | 6 ～ 30 | 0.5 ～ 20 | 1.5 ～ 20 | 0.02 ～ 0.08 | 0.05 | 0.3 ～ 3 | 0.01 ～ 0.1 | 0.01 ～ 0.1 | 0.01 ～ 0.05 | 0.1 ～ 1 | 0.01 ～ 0.1 | .0.4 ～ 1 | 0.1 ～ 1 | 14 ～ 40 | 0.3 ～ 3 | 0.3 ～ 3 | 0.1 ～ 3 | 0.1 ～ 3 | 2.8 | 7 | 3 ～ 12 | 11.1 ～ 15.9 | 11.1 ～ 15.9 | 3 ～ 12 | 3 ～ 20 |
| Overall Length L(mm) | 40 | 66 ～ 165 | 38 ～ 47 | 66 ～ 165 | 68 ～ 146 | 38 | 70 ～ 225 | 55 | 56 ～ 194 | 81 ～ 242 | 40 ～ 60 | 38 | 62 ～ 131 | 66 ～ 153 | 70 ～ 205 | 66 ～ 153 | 38 | 40 | 34 ～ 151 | 124 ～ 133 | 148 ～ 305 | 38 ～ 130 | 58 ～ 200 | 38 | 38 | 38 ～ 80 | 40 | 40 | 40 | 45 | 40 | 38 | 38 | 116 ～ 227 | 40 ～ 60 | 50 | 50 | 50 | 81 | 109 | 50 ～ 110 | 122 ～ 146 | 158 ～ 194 | 68 ～ 122 | 62 ～ 131 |
| Groove Length L(mm) | 0.06 ～ 0.3 | 12 ～ 100 | 2.5 ～ 15 | 17 ～ 100 | 17 ～ 80 | 1.2 ～ 12 | 18 ～ 160 | 2 ～ 11.8 | 8 ～ 128 | 33 ～ 176 | 3.7 ～ 36.5 | 0.12 ～ 0.48 | 20 ～ 79 | 28 ～ 101 | 18 ～ 140 | 28 ～ 101 | 1.5 ～ 10 | 0.015 ～ 0.2 | 12 ～ 101 | 56 ～ 59 | 68 ～ 188 | 1 ～ 40 | 18 ～ 148 | 0.22 ～ 0.88 | 0.075 | 4.5 ～ 45 | 0.015 ～ 0.2 | 0.1 ～ 1 | 0.06 ～ 0.3 | 0.2 ～ 2 | 0.1 ～ 1 | 1.2 ～ 10 | 0.2 ～ 2 | 42 ～ 120 | 1.9 ～ 18.5 | 1.8 ～ 16.8 | 0.6 ～ 16.8 | 0.6 ～ 16.8 | 33 | 56 | 8 ～ 30 | 58 ～ 80 | 92 ～ 128 | 15 ～ 60 | 20 ～ 79 |
| work material | Titanium[◎] | Titanium[○] | Titanium[○] | Titanium[◎] | Titanium[○] | Titanium[○] | Titanium[○] | Titanium[○] | Titanium[○] | Titanium[○] | Titanium[○] | Titanium[○] | Titanium[○] | Titanium[○] | Titanium[◎] | Titanium[○] | Titanium[○] | Titanium[◎] | Titanium[○] | Titanium[○] | Titanium[○] | Titanium[○] | Titanium[○] | Titanium[○] | Titanium[○] | Titanium[○] | Titanium[○] | Titanium[○] | Titanium[○] | Titanium[◎] | Titanium[◎] | Titanium[○] | Titanium[○] | Titanium[○] | Titanium[○] | Titanium[○] | Titanium[○] | Titanium[○] | Titanium[◎] | Titanium[◎] | Titanium[○] | Titanium[○] | Titanium[○] | Titanium[◎] | Titanium[○] |
| Shank Type | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank / straight shank | End Mill Shank / straight shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank / straight shank | End Mill Shank / straight shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank / straight shank | End Mill Shank | End Mill Shank | End Mill Shank | straight shank | End Mill Shank | Taper shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank / straight shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | straight shank | straight shank | End Mill Shank | End Mill Shank | End Mill Shank / straight shank | End Mill Shank |
| Tool Material Type | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide |
| With/without Oil Hole | NA | Available | NA | Available | Available | NA | Available | NA | Available | Available | NA | NA | Available | NA | Available | Available | NA | NA | NA | Available | NA | - | Available | NA | NA | NA | NA | NA | NA | NA | NA | - | - | NA | NA | NA | NA | NA | Available | Available | NA | Available | Available | Available | NA |
| Coating Y/N | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | NA | - | Available | Available | Available | Available | NA | Available | NA | Available | Available | Available | Available | NA | Available | Available | NA | Available | Available | Available | Available | Available | Available | Available | Available |
| Coating Type | TiAlN | Other | Other | Other | Other | Other | Other | TiAlN | Other | Other | TiAlN | Other | Other | Other | Other | Other | TiCN | TiAlN | Other | TiAlN | Non-Coated | Other | TiAlN | Other | Other | Other | - | TiAlN | - | TiAlN | TiAlN | TiAlN | TiAlN | Non-Coated | TiAlN | TiCN | Non-Coated | DLC | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | TiAlN | TiCN | TiCN | - | Other |
Loading...Tải…
ConfigureTạo
Specification/DimensionsĐặc điểm kỹ thuật / Kích thướcĐặc điểm kỹ thuật / Kích thước
-
Hole diameter (drill diameter) D(mm)
-
0～0.995
- 0
- 0.01
- 0.015
- 0.02
- 0.025
- 0.03
- 0.035
- 0.04
- 0.045
- 0.05
- 0.055
- 0.06
- 0.065
- 0.07
- 0.075
- 0.08
- 0.085
- 0.09
- 0.095
- 0.1
- 0.105
- 0.11
- 0.115
- 0.12
- 0.125
- 0.13
- 0.135
- 0.14
- 0.145
- 0.15
- 0.155
- 0.16
- 0.165
- 0.17
- 0.175
- 0.18
- 0.185
- 0.19
- 0.195
- 0.2
- 0.205
- 0.21
- 0.215
- 0.22
- 0.225
- 0.23
- 0.235
- 0.24
- 0.245
- 0.25
- 0.255
- 0.26
- 0.265
- 0.27
- 0.275
- 0.28
- 0.285
- 0.29
- 0.295
- 0.3
- 0.305
- 0.31
- 0.315
- 0.32
- 0.325
- 0.33
- 0.335
- 0.34
- 0.345
- 0.35
- 0.355
- 0.36
- 0.365
- 0.37
- 0.375
- 0.38
- 0.385
- 0.39
- 0.395
- 0.397
- 0.4
- 0.405
- 0.41
- 0.415
- 0.42
- 0.425
- 0.43
- 0.435
- 0.44
- 0.445
- 0.45
- 0.455
- 0.46
- 0.465
- 0.47
- 0.475
- 0.48
- 0.485
- 0.49
- 0.495
- 0.5
- 0.505
- 0.51
- 0.515
- 0.52
- 0.525
- 0.53
- 0.535
- 0.54
- 0.545
- 0.55
- 0.555
- 0.56
- 0.565
- 0.57
- 0.575
- 0.58
- 0.585
- 0.59
- 0.595
- 0.6
- 0.605
- 0.61
- 0.615
- 0.62
- 0.625
- 0.63
- 0.635
- 0.64
- 0.645
- 0.65
- 0.655
- 0.66
- 0.665
- 0.67
- 0.675
- 0.68
- 0.685
- 0.69
- 0.695
- 0.7
- 0.705
- 0.71
- 0.715
- 0.72
- 0.725
- 0.73
- 0.735
- 0.74
- 0.745
- 0.75
- 0.755
- 0.76
- 0.765
- 0.77
- 0.775
- 0.78
- 0.785
- 0.79
- 0.794
- 0.795
- 0.8
- 0.805
- 0.81
- 0.815
- 0.82
- 0.825
- 0.83
- 0.835
- 0.84
- 0.845
- 0.85
- 0.855
- 0.86
- 0.865
- 0.87
- 0.875
- 0.88
- 0.885
- 0.89
- 0.895
- 0.9
- 0.905
- 0.91
- 0.915
- 0.92
- 0.925
- 0.93
- 0.935
- 0.94
- 0.945
- 0.95
- 0.955
- 0.96
- 0.965
- 0.97
- 0.975
- 0.98
- 0.985
- 0.99
- 0.995
-
1～1.995
- 1
- 1/2(inch)
- 1/4(inch)
- 1/8(inch)
- 1/16(inch)
- 1/32(inch)
- 1/64(inch)
- 1.005
- 1.01
- 1.015
- 1.02
- 1.025
- 1.03
- 1.035
- 1.04
- 1.045
- 1.05
- 1.055
- 1.06
- 1.065
- 1.07
- 1.075
- 1.08
- 1.085
- 1.09
- 1.095
- 1.1
- 1.105
- 1.11
- 1.115
- 1.12
- 1.125
- 1.13
- 1.135
- 1.14
- 1.145
- 1.15
- 1.155
- 1.16
- 1.165
- 1.17
- 1.175
- 1.18
- 1.185
- 1.19
- 1.191
- 1.195
- 1.2
- 1.205
- 1.21
- 1.215
- 1.22
- 1.225
- 1.23
- 1.235
- 1.24
- 1.245
- 1.25
- 1.255
- 1.26
- 1.265
- 1.27
- 1.275
- 1.28
- 1.285
- 1.29
- 1.295
- 1.3
- 1.305
- 1.31
- 1.315
- 1.32
- 1.325
- 1.33
- 1.335
- 1.34
- 1.345
- 1.35
- 1.355
- 1.36
- 1.365
- 1.37
- 1.375
- 1.38
- 1.385
- 1.39
- 1.395
- 1.4
- 1.405
- 1.41
- 1.415
- 1.42
- 1.425
- 1.43
- 1.435
- 1.44
- 1.445
- 1.45
- 1.455
- 1.46
- 1.465
- 1.47
- 1.475
- 1.48
- 1.485
- 1.49
- 1.495
- 1.5
- 1.505
- 1.51
- 1.515
- 1.52
- 1.525
- 1.53
- 1.535
- 1.54
- 1.545
- 1.55
- 1.555
- 1.56
- 1.565
- 1.57
- 1.575
- 1.58
- 1.585
- 1.587
- 1.59
- 1.595
- 1.6
- 1.605
- 1.61
- 1.615
- 1.62
- 1.625
- 1.63
- 1.635
- 1.64
- 1.645
- 1.65
- 1.655
- 1.66
- 1.665
- 1.67
- 1.675
- 1.68
- 1.685
- 1.69
- 1.695
- 1.7
- 1.705
- 1.71
- 1.715
- 1.72
- 1.725
- 1.73
- 1.735
- 1.74
- 1.745
- 1.75
- 1.755
- 1.76
- 1.765
- 1.77
- 1.775
- 1.78
- 1.785
- 1.79
- 1.795
- 1.8
- 1.805
- 1.81
- 1.815
- 1.82
- 1.825
- 1.83
- 1.835
- 1.84
- 1.845
- 1.85
- 1.855
- 1.86
- 1.865
- 1.87
- 1.875
- 1.88
- 1.885
- 1.89
- 1.895
- 1.9
- 1.905
- 1.91
- 1.915
- 1.92
- 1.925
- 1.93
- 1.935
- 1.94
- 1.945
- 1.95
- 1.955
- 1.96
- 1.965
- 1.97
- 1.975
- 1.98
- 1.984
- 1.985
- 1.99
- 1.995
-
2～2.99
- 2
- 2.01
- 2.015
- 2.02
- 2.03
- 2.04
- 2.05
- 2.06
- 2.07
- 2.08
- 2.09
- 2.1
- 2.11
- 2.115
- 2.12
- 2.13
- 2.14
- 2.15
- 2.16
- 2.17
- 2.18
- 2.19
- 2.2
- 2.21
- 2.215
- 2.22
- 2.23
- 2.24
- 2.25
- 2.26
- 2.27
- 2.28
- 2.29
- 2.3
- 2.31
- 2.315
- 2.32
- 2.33
- 2.34
- 2.35
- 2.36
- 2.37
- 2.38
- 2.381
- 2.383
- 2.39
- 2.4
- 2.41
- 2.415
- 2.42
- 2.43
- 2.439
- 2.44
- 2.45
- 2.46
- 2.47
- 2.48
- 2.489
- 2.49
- 2.5
- 2.51
- 2.515
- 2.52
- 2.53
- 2.54
- 2.55
- 2.56
- 2.57
- 2.578
- 2.58
- 2.59
- 2.6
- 2.61
- 2.615
- 2.62
- 2.63
- 2.64
- 2.642
- 2.65
- 2.66
- 2.67
- 2.68
- 2.69
- 2.7
- 2.705
- 2.71
- 2.715
- 2.72
- 2.73
- 2.74
- 2.75
- 2.76
- 2.77
- 2.778
- 2.779
- 2.78
- 2.79
- 2.8
- 2.81
- 2.815
- 2.82
- 2.83
- 2.84
- 2.85
- 2.86
- 2.87
- 2.88
- 2.89
- 2.9
- 2.91
- 2.915
- 2.92
- 2.93
- 2.94
- 2.947
- 2.95
- 2.96
- 2.97
- 2.98
- 2.99
-
3～3.99
- 3
- 3/8(inch)
- 3/16(inch)
- 3/32(inch)
- 3/64(inch)
- 3.01
- 3.02
- 3.03
- 3.04
- 3.048
- 3.05
- 3.06
- 3.07
- 3.08
- 3.09
- 3.1
- 3.11
- 3.12
- 3.13
- 3.14
- 3.15
- 3.16
- 3.17
- 3.175
- 3.175
- 3.18
- 3.19
- 3.2
- 3.21
- 3.22
- 3.23
- 3.24
- 3.25
- 3.26
- 3.264
- 3.27
- 3.28
- 3.29
- 3.3
- 3.31
- 3.32
- 3.33
- 3.34
- 3.35
- 3.36
- 3.37
- 3.38
- 3.39
- 3.4
- 3.41
- 3.42
- 3.43
- 3.44
- 3.45
- 3.455
- 3.46
- 3.47
- 3.48
- 3.49
- 3.5
- 3.51
- 3.52
- 3.53
- 3.54
- 3.55
- 3.56
- 3.57
- 3.571
- 3.572
- 3.58
- 3.59
- 3.6
- 3.61
- 3.62
- 3.63
- 3.64
- 3.65
- 3.658
- 3.66
- 3.67
- 3.68
- 3.69
- 3.7
- 3.71
- 3.72
- 3.73
- 3.734
- 3.74
- 3.75
- 3.76
- 3.77
- 3.78
- 3.79
- 3.8
- 3.81
- 3.82
- 3.83
- 3.84
- 3.85
- 3.86
- 3.87
- 3.88
- 3.89
- 3.9
- 3.91
- 3.92
- 3.93
- 3.94
- 3.95
- 3.96
- 3.969
- 3.97
- 3.98
- 3.99
-
4～4.99
- 4
- 4.01
- 4.02
- 4.03
- 4.039
- 4.04
- 4.05
- 4.06
- 4.07
- 4.08
- 4.09
- 4.1
- 4.11
- 4.12
- 4.13
- 4.14
- 4.15
- 4.16
- 4.17
- 4.176
- 4.18
- 4.19
- 4.2
- 4.21
- 4.217
- 4.22
- 4.23
- 4.24
- 4.25
- 4.26
- 4.27
- 4.28
- 4.29
- 4.3
- 4.31
- 4.32
- 4.33
- 4.34
- 4.35
- 4.36
- 4.366
- 4.366
- 4.37
- 4.38
- 4.39
- 4.4
- 4.41
- 4.42
- 4.43
- 4.44
- 4.45
- 4.46
- 4.47
- 4.48
- 4.49
- 4.5
- 4.51
- 4.52
- 4.53
- 4.54
- 4.55
- 4.56
- 4.57
- 4.58
- 4.59
- 4.6
- 4.61
- 4.62
- 4.623
- 4.63
- 4.64
- 4.65
- 4.66
- 4.67
- 4.68
- 4.69
- 4.7
- 4.71
- 4.72
- 4.73
- 4.74
- 4.75
- 4.76
- 4.762
- 4.763
- 4.77
- 4.78
- 4.79
- 4.8
- 4.81
- 4.82
- 4.83
- 4.837
- 4.84
- 4.85
- 4.852
- 4.86
- 4.864
- 4.87
- 4.88
- 4.89
- 4.9
- 4.91
- 4.92
- 4.93
- 4.94
- 4.95
- 4.96
- 4.97
- 4.98
- 4.99
-
5～5.99
- 5
- 5/8(inch)
- 5/16(inch)
- 5/32(inch)
- 5/64(inch)
- 5.01
- 5.02
- 5.03
- 5.04
- 5.05
- 5.06
- 5.07
- 5.08
- 5.09
- 5.1
- 5.106
- 5.11
- 5.12
- 5.13
- 5.14
- 5.15
- 5.159
- 5.159
- 5.16
- 5.17
- 5.18
- 5.19
- 5.2
- 5.21
- 5.22
- 5.23
- 5.24
- 5.25
- 5.26
- 5.27
- 5.28
- 5.29
- 5.3
- 5.31
- 5.32
- 5.33
- 5.34
- 5.35
- 5.36
- 5.37
- 5.38
- 5.39
- 5.4
- 5.41
- 5.42
- 5.43
- 5.44
- 5.45
- 5.46
- 5.47
- 5.48
- 5.49
- 5.49999999999999
- 5.5
- 5.51
- 5.52
- 5.53
- 5.54
- 5.55
- 5.556
- 5.558
- 5.56
- 5.565
- 5.57
- 5.58
- 5.59
- 5.59999999999999
- 5.6
- 5.61
- 5.616
- 5.62
- 5.63
- 5.64
- 5.65
- 5.66
- 5.67
- 5.68
- 5.69
- 5.69999999999999
- 5.7
- 5.71
- 5.72
- 5.73
- 5.74
- 5.75
- 5.76
- 5.77
- 5.78
- 5.79
- 5.79999999999999
- 5.8
- 5.81
- 5.82
- 5.83
- 5.84
- 5.85
- 5.86
- 5.87
- 5.88
- 5.89
- 5.89999999999999
- 5.9
- 5.91
- 5.92
- 5.93
- 5.94
- 5.95
- 5.953
- 5.954
- 5.96
- 5.97
- 5.98
- 5.99
-
6～6.99
- 6
- 6.01
- 6.02
- 6.03
- 6.04
- 6.05
- 6.06
- 6.07
- 6.08
- 6.09
- 6.09999999999999
- 6.1
- 6.13
- 6.15
- 6.19999999999999
- 6.2
- 6.23
- 6.25
- 6.29999999999999
- 6.3
- 6.33
- 6.35
- 6.35
- 6.35 (¼")
- 6.365
- 6.375
- 6.39999999999999
- 6.4
- 6.43
- 6.45
- 6.48
- 6.49
- 6.49999999999999
- 6.5
- 6.51
- 6.52
- 6.528
- 6.53
- 6.55
- 6.59999999999999
- 6.6
- 6.63
- 6.65
- 6.69999999999999
- 6.7
- 6.73
- 6.746
- 6.747
- 6.75
- 6.8
- 6.83
- 6.85
- 6.89999999999999
- 6.9
- 6.93
- 6.95
- 6.98
- 6.99
-
7～7.99
- 7
- 7/16(inch)
- 7/32(inch)
- 7/64(inch)
- 7.01
- 7.02
- 7.03
- 7.04
- 7.05
- 7.06
- 7.07
- 7.08
- 7.09
- 7.09999999999999
- 7.1
- 7.13
- 7.14
- 7.144
- 7.145
- 7.15
- 7.19999999999999
- 7.2
- 7.23
- 7.25
- 7.29999999999999
- 7.3
- 7.33
- 7.35
- 7.36
- 7.38
- 7.39999999999999
- 7.4
- 7.43
- 7.45
- 7.48
- 7.49
- 7.49999999999999
- 7.5
- 7.51
- 7.52
- 7.53
- 7.54
- 7.541
- 7.541
- 7.55
- 7.59999999999999
- 7.6
- 7.63
- 7.65
- 7.69999999999999
- 7.7
- 7.73
- 7.75
- 7.79999999999999
- 7.8
- 7.83
- 7.85
- 7.89999999999999
- 7.9
- 7.93
- 7.937
- 7.938
- 7.94
- 7.95
- 7.953
- 7.98
- 7.99
-
8～8.99
- 8
- 8.01
- 8.02
- 8.03
- 8.04
- 8.05
- 8.06
- 8.07
- 8.08
- 8.09
- 8.09999999999999
- 8.1
- 8.13
- 8.15
- 8.19999999999999
- 8.2
- 8.23
- 8.25
- 8.29999999999998
- 8.3
- 8.33
- 8.334
- 8.35
- 8.39999999999998
- 8.4
- 8.43
- 8.433
- 8.45
- 8.48
- 8.49
- 8.5
- 8.50000000000001
- 8.51
- 8.52
- 8.53
- 8.55
- 8.58
- 8.59999999999998
- 8.6
- 8.63
- 8.65
- 8.69999999999998
- 8.7
- 8.73
- 8.731
- 8.733
- 8.75
- 8.79999999999998
- 8.8
- 8.80000000000001
- 8.83
- 8.85
- 8.89999999999998
- 8.9
- 8.90000000000001
- 8.93
- 8.95
- 8.98
- 8.99
-
9～9.99
- 9
- 9/16(inch)
- 9/32(inch)
- 9/64(inch)
- 9.01
- 9.02
- 9.03
- 9.04
- 9.05
- 9.06
- 9.07
- 9.08
- 9.09
- 9.09999999999998
- 9.1
- 9.128
- 9.129
- 9.13
- 9.15
- 9.19999999999998
- 9.2
- 9.20000000000001
- 9.21
- 9.23
- 9.24
- 9.25
- 9.26
- 9.29999999999998
- 9.3
- 9.30000000000001
- 9.33
- 9.347
- 9.35
- 9.36
- 9.38
- 9.39999999999998
- 9.4
- 9.40000000000001
- 9.43
- 9.45
- 9.48
- 9.49
- 9.49999999999998
- 9.5
- 9.50000000000001
- 9.51
- 9.52
- 9.525
- 9.53
- 9.54
- 9.55
- 9.59999999999998
- 9.6
- 9.60000000000001
- 9.63
- 9.65
- 9.69999999999998
- 9.7
- 9.70000000000001
- 9.73
- 9.75
- 9.79999999999998
- 9.8
- 9.80000000000001
- 9.83
- 9.85
- 9.89999999999998
- 9.9
- 9.90000000000001
- 9.92
- 9.921
- 9.922
- 9.93
- 9.95
- 9.97
- 9.98
- 9.99
-
10～10.99
- 10
- 10.01
- 10.02
- 10.03
- 10.04
- 10.05
- 10.06
- 10.07
- 10.08
- 10.09
- 10.1
- 10.13
- 10.15
- 10.2
- 10.23
- 10.25
- 10.3
- 10.319
- 10.32
- 10.33
- 10.35
- 10.4
- 10.43
- 10.45
- 10.48
- 10.49
- 10.5
- 10.51
- 10.52
- 10.53
- 10.55
- 10.6
- 10.63
- 10.65
- 10.7
- 10.716
- 10.716
- 10.72
- 10.73
- 10.75
- 10.8
- 10.83
- 10.85
- 10.9
- 10.93
- 10.95
- 10.98
- 10.99
-
11～11.99
- 11
- 11/32(inch)
- 11/64(inch)
- 11.01
- 11.02
- 11.03
- 11.04
- 11.05
- 11.06
- 11.07
- 11.08
- 11.09
- 11.1
- 11.11
- 11.112
- 11.113
- 11.13
- 11.133
- 11.15
- 11.2
- 11.22
- 11.23
- 11.24
- 11.25
- 11.3
- 11.33
- 11.35
- 11.36
- 11.38
- 11.4
- 11.43
- 11.45
- 11.48
- 11.49
- 11.5
- 11.509
- 11.509
- 11.51
- 11.52
- 11.53
- 11.55
- 11.56
- 11.6
- 11.63
- 11.65
- 11.7
- 11.73
- 11.75
- 11.8
- 11.83
- 11.85
- 11.9
- 11.906
- 11.908
- 11.91
- 11.93
- 11.95
- 11.98
- 11.99
-
12～12.99
- 12
- 12.01
- 12.02
- 12.03
- 12.04
- 12.05
- 12.06
- 12.07
- 12.08
- 12.09
- 12.1
- 12.15
- 12.2
- 12.25
- 12.3
- 12.303
- 12.304
- 12.35
- 12.4
- 12.45
- 12.48
- 12.49
- 12.5
- 12.51
- 12.52
- 12.55
- 12.6
- 12.65
- 12.7
- 12.7
- 12.75
- 12.8
- 12.85
- 12.9
- 12.95
- 12.96
- 12.98
- 12.99
-
13～13.9
- 13
- 13/32(inch)
- 13/64(inch)
- 13.096
- 13.097
- 13.1
- 13.2
- 13.25
- 13.3
- 13.4
- 13.43
- 13.49
- 13.494
- 13.5
- 13.5~25
- 13.55
- 13.6
- 13.7
- 13.8
- 13.89
- 13.891
- 13.891
- 13.9
-
14～14.96
- 14
- 14.1
- 14.2
- 14.25
- 14.287
- 14.288
- 14.29
- 14.3
- 14.4
- 14.5
- 14.6
- 14.684
- 14.684
- 14.7
- 14.75
- 14.8
- 14.9
- 14.96
-
15～15.9
- 15
- 15/32(inch)
- 15/64(inch)
- 15.083
- 15.1
- 15.2
- 15.25
- 15.3
- 15.4
- 15.479
- 15.5
- 15.55
- 15.6
- 15.7
- 15.75
- 15.8
- 15.875
- 15.875
- 15.9
-
16～16.9
- 16
- 16.1
- 16.2
- 16.271
- 16.3
- 16.4
- 16.5
- 16.6
- 16.67
- 16.7
- 16.8
- 16.9
-
17～17.9
- 17
- 17/32(inch)
- 17/64(inch)
- 17.1
- 17.2
- 17.3
- 17.4
- 17.463
- 17.5
- 17.55
- 17.6
- 17.7
- 17.8
- 17.9
-
18～18.9
- 18
- 18.1
- 18.2
- 18.258
- 18.3
- 18.4
- 18.5
- 18.6
- 18.654
- 18.7
- 18.8
- 18.9
-
19～19.9
- 19
- 19/64(inch)
- 19.05
- 19.1
- 19.2
- 19.3
- 19.4
- 19.5
- 19.55
- 19.6
- 19.7
- 19.8
- 19.9
-
20～20.5
- 20
- 20.5
-
21～21.5
- 21
- 21/64(inch)
- 21.5
-
22～22.5
- 22
- 22.5
-
23～23.5
- 23
- 23/64(inch)
- 23.5
-
24～24.5/24.7
- 24
- 24.5
- 24.5/24.7
-
25～25.5
- 25
- 25/64(inch)
- 25.5
-
26～26.5/26.7
- 26
- 26.5
- 26.5/26.7
-
27～27.5
- 27
- 27/64(inch)
- 27.5
-
28～28.5
- 28
- 28.5
-
29～29.5
- 29
- 29/64(inch)
- 29.5
-
30～30.5
- 30
- 30.5
-
31～31.5
- 31
- 31/64(inch)
- 31.5
-
32～32.5
- 32
- 32.5
-
33～33.5
- 33
- 33/64(inch)
- 33.5
-
34～34.5
- 34
- 34.5
-
35～35.5
- 35
- 35/64(inch)
- 35.5
-
36～36.5
- 36
- 36.5
-
37～37.5
- 37
- 37/64(inch)
- 37.5
-
38～38.5
- 38
- 38.5
-
39～39.5
- 39
- 39.5
-
40～40.5
- 40
- 40.5
-
41～41.5
- 41
- 41.5
-
42～42.5
- 42
- 42.5
-
43～43.5
- 43
- 43.5
-
44～44.5
- 44
- 44.5
-
45～45.5
- 45
- 45.5
-
46～46.5
- 46
- 46.5
-
47～47.5
- 47
- 47.5
-
48～48.5
- 48
- 48.5
-
49～49.5
- 49
- 49.5
-
50
-
-
Overall Length L(mm)
-
Groove Length L(mm)
-
0～0.9
- 0
- 0.015
- 0.025
- 0.04
- 0.05
- 0.06
- 0.075
- 0.08
- 0.09
- 0.1
- 0.12
- 0.14
- 0.15
- 0.16
- 0.18
- 0.2
- 0.22
- 0.24
- 0.25
- 0.3
- 0.33
- 0.4
- 0.44
- 0.48
- 0.5
- 0.55
- 0.6
- 0.7
- 0.8
- 0.88
- 0.9
-
1～1.98
- 1
- 1.1
- 1.2
- 1.3
- 1.4
- 1.5
- 1.6
- 1.65
- 1.7
- 1.8
- 1.9
- 1.98
-
2～2.97
- 2
- 2.1
- 2.2
- 2.3
- 2.31
- 2.4
- 2.5
- 2.6
- 2.64
- 2.7
- 2.8
- 2.9
- 2.97
-
3～3.9
- 3
- 3.1
- 3.2
- 3.3
- 3.4
- 3.5
- 3.6
- 3.7
- 3.8
- 3.9
-
4～4.9
- 4
- 4.1
- 4.2
- 4.3
- 4.4
- 4.5
- 4.6
- 4.7
- 4.8
- 4.9
-
5～5.8
- 5
- 5.1
- 5.2
- 5.3
- 5.4
- 5.5
- 5.6
- 5.7
- 5.8
-
6～6.8
- 6
- 6.2
- 6.3
- 6.4
- 6.5
- 6.6
- 6.8
-
7～7.8
- 7
- 7.2
- 7.3
- 7.4
- 7.5
- 7.6
- 7.8
-
8～8.8
- 8
- 8.2
- 8.3
- 8.4
- 8.5
- 8.6
- 8.8
-
9～9.8
- 9
- 9.2
- 9.3
- 9.4
- 9.5
- 9.6
- 9.8
-
10～10.8
- 10
- 10..1
- 10.1
- 10.2
- 10.4
- 10.5
- 10.6
- 10.8
-
11～11.8
- 11
- 11.1
- 11.2
- 11.3
- 11.4
- 11.6
- 11.7
- 11.8
-
12～12.8
- 12
- 12.2
- 12.3
- 12.5
- 12.6
- 12.8
-
13～13.8
- 13
- 13.1
- 13.2
- 13.5
- 13.8
-
14～14.9
- 14
- 14.3
- 14.4
- 14.5
- 14.8
- 14.9
-
15～15.8
- 15
- 15.3
- 15.6
- 15.8
-
16～16.8
- 16
- 16.1
- 16.2
- 16.5
- 16.7
- 16.8
-
17～17.8
- 17
- 17.1
- 17.2
- 17.3
- 17.4
- 17.6
- 17.8
-
18～18.9
- 18
- 18.5
- 18.6
- 18.8
- 18.9
-
19～19.8
- 19
- 19.2
- 19.4
- 19.5
- 19.7
- 19.8
-
20～20.7
- 20
- 20.3
- 20.4
- 20.7
-
21～21.8
- 21
- 21.2
- 21.4
- 21.6
- 21.8
-
22～22.8
- 22
- 22.1
- 22.2
- 22.5
- 22.8
-
23～23.9
- 23
- 23.3
- 23.4
- 23.9
-
24～24.8
- 24
- 24.3
- 24.5
- 24.6
- 24.8
-
25～25.8
- 25
- 25.2
- 25.5
- 25.7
- 25.8
-
26～26.6
- 26
- 26.1
- 26.3
- 26.4
- 26.6
-
27～27.8
- 27
- 27.6
- 27.8
-
28～28.8
- 28
- 28.1
- 28.2
- 28.5
- 28.8
-
29～29.4
- 29
- 29.3
- 29.4
-
30～30.8
- 30
- 30.6
- 30.8
-
31～31.7
- 31
- 31.2
- 31.5
- 31.7
-
32～32.8
- 32
- 32.3
- 32.4
- 32.8
-
33～33.8
- 33
- 33.6
- 33.8
-
34～34.8
- 34
- 34.1
- 34.4
- 34.5
- 34.8
-
35～35.5
- 35
- 35.3
- 35.5
-
36～36.8
- 36
- 36.5
- 36.8
-
37～37.5
- 37
- 37.5
-
38～38.3
- 38
- 38.3
-
39～39.8
- 39
- 39.8
-
40～40.5
- 40
- 40.5
-
41～41.3
- 41
- 41.3
-
42～42.8
- 42
- 42.8
-
43～43.5
- 43
- 43.2
- 43.5
-
44～44.3
- 44
- 44.3
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
-
80
-
81
-
82
-
83
-
84
-
85
-
86
-
87
-
88
-
89
-
90
-
91
-
92
-
93
-
94
-
95
-
96
-
97
-
98
-
99
-
100
-
101
-
102
-
103
-
104
-
105
-
106
-
107
-
108
-
109
-
110
-
111
-
112
-
113
-
114
-
115
-
116
-
117
-
118
-
119
-
120
-
121
-
122
-
123
-
124
-
125
-
126
-
127
-
128
-
130
-
131
-
132
-
133
-
134
-
135
-
136
-
137
-
138
-
140
-
143
-
144
-
145
-
146
-
148
-
149
-
150
-
152
-
153
-
154
-
155
-
156
-
159
-
160
-
161
-
162
-
163
-
165
-
167
-
168
-
169
-
170
-
171
-
173
-
175
-
176
-
177
-
180
-
182
-
183
-
184
-
185
-
188
-
189
-
190
-
195
-
196
-
197
-
198
-
200
-
205
-
207
-
208
-
210
-
212
-
214
-
215
-
216
-
218
-
219
-
220
-
223
-
224
-
225
-
227
-
230
-
231
-
232
-
234
-
240
-
242
-
248
-
250
-
252
-
253
-
258
-
260
-
263
-
264
-
265
-
270
-
272
-
274
-
277
-
280
-
282
-
290
-
292
-
295
-
300
-
302
-
310
-
315
-
318
-
322
-
323
-
327
-
330
-
337
-
340
-
343
-
350
-
360
-
372
-
385
-
400
-
402
-
432
-
440
-
460
-
512
-
550
-
692
-
860
-
1030
-
-
work material
- general steel
- Quenched and tempered steel
- high hardness steel
- Stainless Steel
- Cast Iron
- Aluminum
- Titanium
- Copper
- Graphite
- Resin
- Machinable Ceramics
-
Shank Type
-
End Mill Shank
-
straight shank
-
Taper shank
-
End Mill Shank
-
Tool Material Type
- High-speed steel
- Carbide
- PCD
-
With/without Oil Hole
-
Coating Y/N
- Available
- NA
-
Coating Type
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy