(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.
Tel: 0222-361-1555
Email: cs@misumi.com.vn
8:00 - 17:00 (Mon - Sat)
Search by Category / Brand Tìm theo danh mục, nhãn hiệu
Search by Category Tìm theo danh mục
- Thể lệ và Giải thưởng cuộc thi "Thiết kế máy Tự động hóa 2025" do MISUMI Việt Nam tổ chức. Xem chi tiết.
- [Thông báo] Cập nhật địa chỉ kho tập kết hàng hóa tại khu vực miền Nam của MISUMI Việt Nam. Xem chi tiết.
[Announcement] Update on warehouse address in the Southern region of MISUIMI Vietnam. See more.
Holding Tools for O.D. Tuning（Application：Outer Diameter）
Brand |
|
|---|---|
| CAD |
|
| Days to Ship |
|
359 itemsMặt hàng
- Sort By
-
You can add up to 6 items per a category to the compare list.
AVJB-FF Type (without Offset) (Outer Diameter Machining / Profiling)
KYOCERA
Back surface clamping type / screw clamping type small tool holder (outer diameter).
Applicable Tip Shape Applicable Chip Clearance Angle Selfishly Application Clamp Shape Shank height(mm) Shank width(mm) V (35° Diamond-Shaped) Pozidriv Right-hand / Left-hand Outer Diameter Back Surface Clamp - - From: 1,990,408 VND Days to Ship: Số ngày giao hàng: 8 Day(s) or more 
8 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Outer-Diameter Turning - Shank Tool Bit For Negative Inserts, CoroTurn RC Double Clamp, DTJNR/L
SANDVIK
[Features]A high-rigidity double clamp holder for turning. Extremely easy to handle. Swap out inserts and shims using just the one wrench. Inserts are easy to swap out, even from the backside of the holder. A wide variety of insert types can be mounted by swapping out the clamp set and shims. Supports outer-diameter turning (bore-cutting) and the use of negative inserts. Supports everything from roughing through to finishing.
Applicable Tip Shape Applicable Chip Clearance Angle Selfishly Application Clamp Shape Shank height(mm) Shank width(mm) T (Triangle) Negative Right-hand / Left-hand Outer Diameter Cable clamp 16 ～ 32 16 ～ 32 From: 3,310,621 VND Days to Ship: Số ngày giao hàng: 8 Day(s) or more
8 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
SEC-M Type Tool Bit MTJN Type (Cutting Direction: Right)
SUMITOMO ELECTRIC HARDMETAL
Clamp on + pin lock type. General / Profile cutting[Features]・ A stable clamp improves insert fracture resistance.・ High index precision improves machining precision.・ Insert replacement work is possible from the bottom side of the tool bit.・ Ideal for high efficiency, intermittent, and high hardness material machining.
Applicable Tip Shape Applicable Chip Clearance Angle Selfishly Application Clamp Shape Shank height(mm) Shank width(mm) T (Triangle) Negative Right-hand Outer Diameter Double Clamp 20 ～ 32 20 ～ 25 From: 2,589,616 VND Days to Ship: Số ngày giao hàng: 8 Day(s) or more
8 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
WTJN-N Type (outer diameter, profile machining)
KYOCERA
[Specifications]·Machining applications: outer diameter and profiling; compatible insert shape: T (triangle); compatible insert relief angle: negative 0 (N); clamp method: non-ISO standard
Applicable Tip Shape Applicable Chip Clearance Angle Selfishly Application Clamp Shape Shank height(mm) Shank width(mm) T (Triangle) Negative Right-hand / Left-hand Outer Diameter Wedge Lock - - From: 2,255,783 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
SEC-70 Type Tool Bit PCLN Type (Cutting Direction: Right)
SUMITOMO ELECTRIC HARDMETAL
Lever lock type. For general / end face cutting[Features]・ A stable clamp improves insert fracture resistance.・ High index precision improves machining precision.・ Insert replacement work is possible from the bottom side of the tool bit.・ Ideal for high efficiency, intermittent, and high hardness material machining.
Applicable Tip Shape Applicable Chip Clearance Angle Selfishly Application Clamp Shape Shank height(mm) Shank width(mm) C (80° Diamond-Shape) Negative Right-hand Outer Diameter Lever lock 16 ～ 32 16 ～ 32 From: 1,771,263 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
SEC-SD Type Profiling Tool Bit SDJC Type (Cutting Direction: Right)
SUMITOMO ELECTRIC HARDMETAL
Screw-on type. General / Profile cutting[Features]・ A stable clamp improves insert fracture resistance.・ High index precision improves machining precision.・ Insert replacement work is possible from the bottom side of the tool bit.・ Ideal for high efficiency, intermittent, and high hardness material machining.
Applicable Tip Shape Applicable Chip Clearance Angle Selfishly Application Clamp Shape Shank height(mm) Shank width(mm) D (55° Diamond-Shape) Pozidriv Right-hand Outer Diameter Screw-on 8 ～ 25 8 ～ 25 From: 1,739,394 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
STGC (P) Type (Outside Diameter Machining)
KYOCERA
[Specifications]·Machining applications: outer diameter; compatible insert shape: T (triangle); compatible insert relief angle: positive 11° (P), positive 7° (C); clamp method: screw-on (S)
Applicable Tip Shape Applicable Chip Clearance Angle Selfishly Application Clamp Shape Shank height(mm) Shank width(mm) T (Triangle) Pozidriv Right-hand / Left-hand Outer Diameter Screw-on - - From: 1,663,657 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
SVJB Type (outer diameter, profile machining)
KYOCERA
Back surface clamping type / screw clamping type small tool holder (outer diameter).
Applicable Tip Shape Applicable Chip Clearance Angle Selfishly Application Clamp Shape Shank height(mm) Shank width(mm) V (35° Diamond-Shaped) Pozidriv Right-hand / Left-hand Outer Diameter Screw-on - - From: 1,969,949 VND Days to Ship: Số ngày giao hàng: 8 Day(s) or more
8 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
S...SDLC Type (External Diameter, Copy Machining)
KYOCERA
[Specifications]·Machining applications: outer diameter and profiling; compatible insert shape: D (55° two-bolt); compatible insert relief angle: positive 7° (C); clamp method: screw-on (S)
Applicable Tip Shape Applicable Chip Clearance Angle Selfishly Application Clamp Shape Shank height(mm) Shank width(mm) D (55° Diamond-Shape) Pozidriv Left-hand Outer Diameter Screw-on - - From: 4,787,761 VND Days to Ship: Số ngày giao hàng: 7 Day(s) or more
7 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
SEC-Mini Tool Bit, Zero Offset Holder, SVJC-X Type
SUMITOMO ELECTRIC HARDMETAL
Sumitomo Electric Industries Hardmetal, outer diameter turning holder SEC-Mini tool bit offset 0 holder SVJC-X type.
Applicable Tip Shape Applicable Chip Clearance Angle Selfishly Application Clamp Shape Shank height(mm) Shank width(mm) V (35° Diamond-Shaped) Pozidriv Right-hand / Left-hand Outer Diameter Screw-on 10 ～ 12 10 ～ 12 From: 1,739,394 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
SEC-SV Type Profiling Tool Bit, SVJC Type
SUMITOMO ELECTRIC HARDMETAL
Sumitomo Electric Industries Hardmetal, outer diameter turning holder SEC-SV type profiling tool bit SVJC type.
Applicable Tip Shape Applicable Chip Clearance Angle Selfishly Application Clamp Shape Shank height(mm) Shank width(mm) V (35° Diamond-Shaped) Pozidriv Right-hand / Left-hand Outer Diameter Screw-on 20 ～ 32 20 ～ 25 From: 2,886,466 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
DCLN Type (Outer Diameter Machining / End Machining)
KYOCERA
[Specifications]·Machining applications: outer diameter and flange; compatible insert shape: C (80° two-bolt); compatible insert relief angle: negative 0° (N); clamp method: double clamp (D)
Applicable Tip Shape Applicable Chip Clearance Angle Selfishly Application Clamp Shape Shank height(mm) Shank width(mm) C (80° Diamond-Shape) Negative Right-hand / Left-hand Outer Diameter Cable clamp 20 ～ 25 20 ～ 25 From: 2,008,113 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
PVLN Type (External Diameter, Profiling)
KYOCERA
[Specifications]·Machining applications: outer diameter and profiling; compatible insert shape: V (35° two-bolt); compatible insert relief angle: negative 0° (N); clamp method: pin lock (P)
Applicable Tip Shape Applicable Chip Clearance Angle Selfishly Application Clamp Shape Shank height(mm) Shank width(mm) V (35° Diamond-Shaped) Negative Right-hand / Left-hand Outer Diameter Pin Lock - - From: 2,031,129 VND Days to Ship: Số ngày giao hàng: 8 Day(s) or more
8 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
DWLN Type (External Diameter/End-Face Machining)
KYOCERA
[Specifications]·Machining applications: outer diameter and flange; compatible insert shape: W (hexagonal); compatible insert relief angle: negative 0° (N); clamp method: double clamp (D)
Applicable Tip Shape Applicable Chip Clearance Angle Selfishly Application Clamp Shape Shank height(mm) Shank width(mm) W (Hexagonal Type) Negative Right-hand / Left-hand Outer Diameter Cable clamp 20 ～ 25 20 ～ 25 From: 2,008,113 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
PWLN Type (External Diameter/End-Face Machining)
KYOCERA
Double clamp type / lever lock type / wedge lock type general outer diameter holder.
Applicable Tip Shape Applicable Chip Clearance Angle Selfishly Application Clamp Shape Shank height(mm) Shank width(mm) W (Hexagonal Type) Negative Right-hand / Left-hand Outer Diameter Lever lock 16 ～ 25 16 ～ 25 From: 1,803,918 VND Days to Ship: Số ngày giao hàng: 7 Day(s) or more
7 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
ACLC-FF Type (without Offset) (Outer Diameter Machining / End Machining)
KYOCERA
[Specifications]·Machining applications: outer diameter and flange; compatible insert shape: C (80° two-bolt); compatible insert relief angle: positive 7; clamp method: non-ISO standard
Applicable Tip Shape Applicable Chip Clearance Angle Selfishly Application Clamp Shape Shank height(mm) Shank width(mm) C (80° Diamond-Shape) Pozidriv Right-hand / Left-hand Outer Diameter Back Surface Clamp - - From: 1,990,408 VND Days to Ship: Số ngày giao hàng: 9 Day(s) or more
9 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
SDLC-FF Type (without Offset) (External Diameter / Profiling)
KYOCERA
[Specifications]·Machining applications: outer diameter and profiling; compatible insert shape: D (55° two-bolt); compatible insert relief angle: positive 7° (C); clamp method: screw-on (S)
Applicable Tip Shape Applicable Chip Clearance Angle Selfishly Application Clamp Shape Shank height(mm) Shank width(mm) D (55° Diamond-Shape) Pozidriv Right-hand / Left-hand Outer Diameter Screw-on - - From: 1,663,657 VND Days to Ship: Số ngày giao hàng: 8 Day(s) or more
8 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
SVVB Type (outer diameter, profile machining)
KYOCERA
[Specifications]·Machining applications: outer diameter and profiling; compatible insert shape: V (35° two-bolt); compatible insert relief angle: positive 5° (B); clamp method: screw-on (S)
Applicable Tip Shape Applicable Chip Clearance Angle Selfishly Application Clamp Shape Shank height(mm) Shank width(mm) V (35° Diamond-Shaped) Pozidriv No-hand Outer Diameter Screw-on - - From: 1,663,657 VND Days to Ship: Số ngày giao hàng: 8 Day(s) or more
8 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
S...SCLC Type (External Diameter/End-Face Machining)
KYOCERA
[Specifications]·Machining applications: outer diameter and flange; compatible insert shape: C (80° two-bolt); compatible insert relief angle: positive 7° (C); clamp method: screw-on (S)
Applicable Tip Shape Applicable Chip Clearance Angle Selfishly Application Clamp Shape Shank height(mm) Shank width(mm) C (80° Diamond-Shape) Pozidriv Left-hand Outer Diameter Screw-on 11 ～ 23 11 ～ 23 From: 4,825,924 VND Days to Ship: Số ngày giao hàng: 9 Day(s) or more
9 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
SANDVIK
Sandvik External Holder External Turning - Negative Insert Bit Shank Bit CoroTurn RC Double Clamp DVPNR/L
Applicable Tip Shape Applicable Chip Clearance Angle Selfishly Application Clamp Shape Shank height(mm) Shank width(mm) V (35° Diamond-Shaped) Negative Right-hand / Left-hand Outer Diameter Cable clamp 32 ～ 40 25 ～ 40 From: 4,650,485 VND Days to Ship: Số ngày giao hàng: 7 Day(s) or more
7 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
CoroTurn 107 shank tool for turning, Screw clamp design, Positive Tip Shank Bit, SDNCN
SANDVIK
[Features]· It is an outer diameter turning tool with safety tip clamp and excellent repeatability.· Chips can be discharged smoothly.· Requires less space.· Few components.[Applications]· For outer diameter turning operations.
Applicable Tip Shape Applicable Chip Clearance Angle Selfishly Application Clamp Shape Shank height(mm) Shank width(mm) - - - Outer Diameter - - - From: 3,880,096 VND Days to Ship: Số ngày giao hàng: 9 Day(s)
9 Day(s)
-
You can add up to 6 items per a category to the compare list.
SEC-70 Type Tool Bit PDJN Type (Cutting Direction: Right)
SUMITOMO ELECTRIC HARDMETAL
Lever lock type. For general / profile cutting[Features]・ A stable clamp improves insert fracture resistance.・ High index precision improves machining precision.・ Insert replacement work is possible from the bottom side of the tool bit.・ Ideal for high efficiency, intermittent, and high hardness material machining.
Applicable Tip Shape Applicable Chip Clearance Angle Selfishly Application Clamp Shape Shank height(mm) Shank width(mm) D (55° Diamond-Shape) Negative Right-hand Outer Diameter Lever lock 20 ～ 32 20 ～ 32 From: 1,851,721 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
SUMITOMO ELECTRIC HARDMETAL
[Specifications]·Compatible insert shape: T (triangle); compatible insert relief angle: negative 0° (N); clamp method: pin lock (P)
Applicable Tip Shape Applicable Chip Clearance Angle Selfishly Application Clamp Shape Shank height(mm) Shank width(mm) T (Triangle) Negative Left-hand Outer Diameter Lever lock 16 ～ 25 16 ～ 25 From: 1,771,263 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
SEC-D Type Tool Bit DVJN Type (Cutting Direction: Right)
SUMITOMO ELECTRIC HARDMETAL
Double clamp type. For general / profile cutting[Features]・ A stable clamp improves insert fracture resistance.・ High index precision improves machining precision.・ Insert replacement work is possible from the bottom side of the tool bit.・ Ideal for high efficiency, intermittent, and high hardness material machining.
Applicable Tip Shape Applicable Chip Clearance Angle Selfishly Application Clamp Shape Shank height(mm) Shank width(mm) V (35° Diamond-Shaped) Negative Right-hand Outer Diameter Cable clamp 20 ～ 25 20 ～ 25 From: 2,589,616 VND Days to Ship: Số ngày giao hàng: 8 Day(s) or more
8 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
PDJN Type (External Diameter, Profiling)
KYOCERA
[Specifications]·Machining applications: outer diameter and profiling; compatible insert shape: D (55° two-bolt); relief angle: negative 0° (N); clamp method: pin lock (P), non-ISO standard
Applicable Tip Shape Applicable Chip Clearance Angle Selfishly Application Clamp Shape Shank height(mm) Shank width(mm) D (55° Diamond-Shape) Negative Right-hand / Left-hand Outer Diameter Lever lock 16 ～ 32 16 ～ 32 From: 1,803,918 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
PDHN Type (External Diameter, End Face, Profiling)
KYOCERA
[Specifications]·Machining applications: outer diameter, flange, and profiling; compatible insert shape: D (55° two-bolt); compatible insert relief angle: negative 0° (N); clamp method: pin lock (P)
Applicable Tip Shape Applicable Chip Clearance Angle Selfishly Application Clamp Shape Shank height(mm) Shank width(mm) D (55° Diamond-Shape) Negative Right-hand / Left-hand Outer Diameter Lever lock - - From: 1,867,852 VND Days to Ship: Số ngày giao hàng: 8 Day(s) or more
8 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
PTGN Type (Outer Diameter Machining)
KYOCERA
[Specifications]·Machining applications: outer diameter; compatible insert shape: T (triangle); relief angle: negative 0° (N); clamp method: pin lock (P), non-ISO standard
Applicable Tip Shape Applicable Chip Clearance Angle Selfishly Application Clamp Shape Shank height(mm) Shank width(mm) T (Triangle) Negative Right-hand / Left-hand Outer Diameter Lever lock 12 ～ 25 12 ～ 25 From: 1,803,918 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
WTKN-N Type (outer diameter, end surface, profile machining)
KYOCERA
[Specifications]·Machining applications: outer diameter, flange, and profiling; compatible insert shape: T (triangle); compatible insert relief angle: negative 0 (N); clamp method: non-ISO standard
Applicable Tip Shape Applicable Chip Clearance Angle Selfishly Application Clamp Shape Shank height(mm) Shank width(mm) T (Triangle) Negative Right-hand / Left-hand Outer Diameter Wedge Lock - - From: 2,255,783 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
DVLN Type (External Diameter, Profiling)
KYOCERA
[Specifications]·Machining applications: outer diameter and profiling; compatible insert shape: V (35° two-bolt); compatible insert relief angle: negative 0° (N); clamp method: double clamp (D)
Applicable Tip Shape Applicable Chip Clearance Angle Selfishly Application Clamp Shape Shank height(mm) Shank width(mm) V (35° Diamond-Shaped) Negative Right-hand / Left-hand Outer Diameter Cable clamp - - From: 1,969,949 VND Days to Ship: Số ngày giao hàng: 8 Day(s) or more
8 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
MVVN Type (External Diameter, Profiling)
KYOCERA
[Specifications]·Machining applications: outer diameter and profiling; compatible insert shape: V (35° two-bolt); compatible insert relief angle: negative 0° (N); clamp method: double clamp (M)
Applicable Tip Shape Applicable Chip Clearance Angle Selfishly Application Clamp Shape Shank height(mm) Shank width(mm) V (35° Diamond-Shaped) Negative No-hand Outer Diameter Double Clamp - - From: 2,990,924 VND Days to Ship: Số ngày giao hàng: 9 Day(s) or more
9 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
SDJC-FF Type (without Offset) (External Diameter / Profiling) Holder
KYOCERA
[Features]·This is SDJC-FF type[Applications]·For small tools, general turning holders, machining of outer diameter and profiling
Applicable Tip Shape Applicable Chip Clearance Angle Selfishly Application Clamp Shape Shank height(mm) Shank width(mm) D (55° Diamond-Shape) Pozidriv Right-hand / Left-hand Outer Diameter Screw-on - - From: 1,663,657 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
SDJC Type (External Diameter, Profiling) Holder
KYOCERA
[Specifications]·Machining applications: outer diameter and profiling; compatible insert shape: D (55° two-bolt); compatible insert relief angle: positive 7° (C); clamp method: screw-on (S)
Applicable Tip Shape Applicable Chip Clearance Angle Selfishly Application Clamp Shape Shank height(mm) Shank width(mm) D (55° Diamond-Shape) Pozidriv Right-hand / Left-hand Outer Diameter Screw-on - - From: 1,663,657 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
SVPB Type (outer diameter, end surface, profile, relief machining)
KYOCERA
[Specifications]·Machining applications: outer diameter, flange, and profiling; compatible insert shape: V (35° two-bolt); compatible insert relief angle: positive 5° (B); clamp method: screw-on (S)
Applicable Tip Shape Applicable Chip Clearance Angle Selfishly Application Clamp Shape Shank height(mm) Shank width(mm) V (35° Diamond-Shaped) Pozidriv Right-hand / Left-hand Outer Diameter Screw-on 10 ～ 25 10 ～ 25 From: 1,865,295 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
SVPP-FF Type (not offset) (outer diameter, end surface, profile, relief machining)
KYOCERA
[Specifications]·Machining applications: outer diameter, flange, and profiling; compatible insert shape: V (35° two-bolt); compatible insert relief angle: positive 11° (P); clamp method: screw-on (S)
Applicable Tip Shape Applicable Chip Clearance Angle Selfishly Application Clamp Shape Shank height(mm) Shank width(mm) V (35° Diamond-Shaped) Pozidriv Right-hand Outer Diameter Screw-on - - From: 1,826,934 VND Days to Ship: Số ngày giao hàng: 8 Day(s) or more
8 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Coromant Capto, Cutting Head, CoroTurn, Ceramic Inserts, DCLNR/L-12-2
SANDVIK
Coromant Capto is a unique coupling with a unique polygonal shapeThe quick change of the lathe greatly contributes to the improvement of the user's productivity.
Applicable Tip Shape Applicable Chip Clearance Angle Selfishly Application Clamp Shape Shank height(mm) Shank width(mm) C (80° Diamond-Shape) - Right-hand / Left-hand Outer Diameter Cable clamp - - From: 9,772,263 VND Days to Ship: Số ngày giao hàng: 7 Day(s) or more
7 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Sandvik, T-Max P, Cutting Unit, Turning, PCLNR/L
SANDVIK
Coromant Capto is a unique coupling with a unique polygonal shapeThe quick change of the lathe greatly contributes to the improvement of the user's productivity.
Applicable Tip Shape Applicable Chip Clearance Angle Selfishly Application Clamp Shape Shank height(mm) Shank width(mm) C (80° Diamond-Shape) Negative Right-hand / Left-hand Outer Diameter Pin Lock - - From: 7,315,865 VND Days to Ship: Số ngày giao hàng: 7 Day(s) or more
7 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Outer-Diameter Turning - Shank Tool Bit For Negative Inserts, CoroTurn RC Double Clamp, DWLNR/L
SANDVIK
[Features]A high-rigidity double clamp holder for turning. Extremely easy to handle. Swap out inserts and shims using just the one wrench. Inserts are easy to swap out, even from the backside of the holder. A wide variety of insert types can be mounted by swapping out the clamp set and shims. Supports outer-diameter turning (bore-cutting) and the use of negative inserts. Supports everything from roughing through to finishing.
Applicable Tip Shape Applicable Chip Clearance Angle Selfishly Application Clamp Shape Shank height(mm) Shank width(mm) W (Hexagonal Type) Negative Right-hand / Left-hand Outer Diameter Cable clamp 16 ～ 32 16 ～ 32 From: 2,777,823 VND Days to Ship: Số ngày giao hàng: 8 Day(s) or more
8 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Sandvik CoroTurn 107, Screw Clamp, SCLCR/L
SANDVIK
For internal and external turning of slender partsHighly repeatable insert exchange improves productivity and achieves high quality
Applicable Tip Shape Applicable Chip Clearance Angle Selfishly Application Clamp Shape Shank height(mm) Shank width(mm) C (80° Diamond-Shape) Pozidriv Right-hand / Left-hand Outer Diameter Clamp-on - - From: 6,975,588 VND Days to Ship: Số ngày giao hàng: 7 Day(s) or more
7 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Shank Tool Bit, Outer Diameter Turning Compact Lathes, QS Series, Short Tool Bit, QS-SCACR-E06
SANDVIK
Quick change system specially developed for small automatic lathesA single screw removes the holder and pulls out the wedge at the same time for quick tool changes and setup
Applicable Tip Shape Applicable Chip Clearance Angle Selfishly Application Clamp Shape Shank height(mm) Shank width(mm) C (80° Diamond-Shape) - Right-hand Outer Diameter Clamp-on 10 ～ 12 10 ～ 12 From: 3,151,713 VND Days to Ship: Số ngày giao hàng: 7 Day(s) or more
7 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Shank Tool Bit, Outer Diameter Turning Positive Inserts, CoroTurn, 107, STGCR/L-09/-11
SANDVIK
[Features]An outer-diameter turning tool featuring stable insert clamping and excellent repeatability. Produces an unimpeded flow of cutting chips. Requires little space for operation. Features a small number of component parts. For outer-diameter turning (bore cutting) operations.
Applicable Tip Shape Applicable Chip Clearance Angle Selfishly Application Clamp Shape Shank height(mm) Shank width(mm) T (Triangle) Pozidriv Right-hand / Left-hand Outer Diameter Clamp-on 12 ～ 16 12 ～ 16 From: 3,339,521 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Holder For Outer Diameter Machining, C31/CCLN
NGK SPARK PLUG
[Features]· For CN (diamond 80°) inserts· For outer diameter and end surface machining· Clamp-on type
Applicable Tip Shape Applicable Chip Clearance Angle Selfishly Application Clamp Shape Shank height(mm) Shank width(mm) C (80° Diamond-Shape) - Right-hand / Left-hand Outer Diameter Clamp-on - - From: 3,903,513 VND Days to Ship: Số ngày giao hàng: 15 Day(s) or more
15 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
MITSUBISHI MATERIALS
[Specifications]·Machining applications: outer diameter and profiling; compatible insert shape: D (55° two-bolt); compatible insert relief angle: positive 20° (E); clamp method: screw-on (S)
Applicable Tip Shape Applicable Chip Clearance Angle Selfishly Application Clamp Shape Shank height(mm) Shank width(mm) D (55° Diamond-Shape) Pozidriv Right-hand / Left-hand Outer Diameter Screw-on 20 20 From: 3,442,810 VND Days to Ship: Số ngày giao hàng: 9 Day(s) or more
9 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
VD○○ Insert Compatible Bit, for Outer Diameter and Profile Machining, Aluminum Alloy Bit
MITSUBISHI MATERIALS
[Specifications]·Machining applications: outer diameter and profiling; compatible insert shape: V (35° two-bolt); compatible insert relief angle: positive 15° (D); clamp method: screw-on (S)
Applicable Tip Shape Applicable Chip Clearance Angle Selfishly Application Clamp Shape Shank height(mm) Shank width(mm) V (35° Diamond-Shaped) Pozidriv Right-hand / Left-hand Outer Diameter Screw-on 20 20 From: 3,316,034 VND Days to Ship: Số ngày giao hàng: 8 Day(s) or more
8 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
SEC-GD Type Profiling Bit GDE Type
SUMITOMO ELECTRIC HARDMETAL
Available with dogbone inserts. For profile cutting[Features]・ A stable clamp improves insert fracture resistance.・ High index precision improves machining precision.・ Insert replacement work is possible from the bottom side of the tool bit.・ Ideal for high efficiency, intermittent, and high hardness material machining.
Applicable Tip Shape Applicable Chip Clearance Angle Selfishly Application Clamp Shape Shank height(mm) Shank width(mm) Other Pozidriv Right-hand / Left-hand Outer Diameter - 25 25 From: 8,675,333 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Tool Bit for SEC-Solid Sumi Boron FCLN
SUMITOMO ELECTRIC HARDMETAL
[Specifications]·Machining applications: outer diameter and flange; compatible insert shape: C (80° two-bolt); compatible insert relief angle: negative 0° (N); clamp method: clamp-on (C)
Applicable Tip Shape Applicable Chip Clearance Angle Selfishly Application Clamp Shape Shank height(mm) Shank width(mm) C (80° Diamond-Shape) - Right-hand / Left-hand Outer Diameter Clamp-on 25 25 From: 3,777,015 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
| BrandNhãn hiệu |
|---|
| Product SeriesDòng sản phẩm |
| From |
| Days to ShipSố ngày giao hàng |
| Applicable Tip Shape |
| Applicable Chip Clearance Angle |
| Selfishly |
| Application |
| Clamp Shape |
| Shank height(mm) |
| Shank width(mm) |
You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | |
| BrandNhãn hiệu | KYOCERA | SANDVIK | SUMITOMO ELECTRIC HARDMETAL | KYOCERA | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | KYOCERA | KYOCERA | KYOCERA | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | SANDVIK | SANDVIK | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | NGK SPARK PLUG | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL |
| Product SeriesDòng sản phẩm | AVJB-FF Type (without Offset) (Outer Diameter Machining / Profiling) | Outer-Diameter Turning - Shank Tool Bit For Negative Inserts, CoroTurn RC Double Clamp, DTJNR/L | SEC-SD Type Profiling Tool Bit SDJC Type (Cutting Direction: Right) | ACLC-FF Type (without Offset) (Outer Diameter Machining / End Machining) | SDLC-FF Type (without Offset) (External Diameter / Profiling) | CoroTurn 107 shank tool for turning, Screw clamp design, Positive Tip Shank Bit, SDNCN | WTKN-N Type (outer diameter, end surface, profile machining) | SDJC-FF Type (without Offset) (External Diameter / Profiling) Holder | SVPB Type (outer diameter, end surface, profile, relief machining) | SVPP-FF Type (not offset) (outer diameter, end surface, profile, relief machining) | Coromant Capto, Cutting Head, CoroTurn, Ceramic Inserts, DCLNR/L-12-2 | Outer-Diameter Turning - Shank Tool Bit For Negative Inserts, CoroTurn RC Double Clamp, DWLNR/L | Shank Tool Bit, Outer Diameter Turning Compact Lathes, QS Series, Short Tool Bit, QS-SCACR-E06 | Shank Tool Bit, Outer Diameter Turning Positive Inserts, CoroTurn, 107, STGCR/L-09/-11 | VD○○ Insert Compatible Bit, for Outer Diameter and Profile Machining, Aluminum Alloy Bit | ||||||||||||||||||||||||||||||
| From | 1,990,408 VND | 3,310,621 VND | 2,589,616 VND | 2,255,783 VND | 1,771,263 VND | 1,739,394 VND | 1,663,657 VND | 1,969,949 VND | 4,787,761 VND | 1,739,394 VND | 2,886,466 VND | 2,008,113 VND | 2,031,129 VND | 2,008,113 VND | 1,803,918 VND | 1,990,408 VND | 1,663,657 VND | 1,663,657 VND | 4,825,924 VND | 4,650,485 VND | 3,880,096 VND | 1,851,721 VND | 1,771,263 VND | 2,589,616 VND | 1,803,918 VND | 1,867,852 VND | 1,803,918 VND | 2,255,783 VND | 1,969,949 VND | 2,990,924 VND | 1,663,657 VND | 1,663,657 VND | 1,865,295 VND | 1,826,934 VND | 9,772,263 VND | 7,315,865 VND | 2,777,823 VND | 6,975,588 VND | 3,151,713 VND | 3,339,521 VND | 3,903,513 VND | 3,442,810 VND | 3,316,034 VND | 8,675,333 VND | 3,777,015 VND |
| Days to ShipSố ngày giao hàng | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 8 Day(s) or more | 7 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 8 Day(s) or more | 6 Day(s) or more | 7 Day(s) or more | 9 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 9 Day(s) or more | 7 Day(s) or more | 9 Day(s) | 6 Day(s) or more | 6 Day(s) or more | 8 Day(s) or more | 6 Day(s) or more | 8 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 8 Day(s) or more | 9 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 8 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 8 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 6 Day(s) or more | 15 Day(s) or more | 9 Day(s) or more | 8 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more |
| Applicable Tip Shape | V (35° Diamond-Shaped) | T (Triangle) | T (Triangle) | T (Triangle) | C (80° Diamond-Shape) | D (55° Diamond-Shape) | T (Triangle) | V (35° Diamond-Shaped) | D (55° Diamond-Shape) | V (35° Diamond-Shaped) | V (35° Diamond-Shaped) | C (80° Diamond-Shape) | V (35° Diamond-Shaped) | W (Hexagonal Type) | W (Hexagonal Type) | C (80° Diamond-Shape) | D (55° Diamond-Shape) | V (35° Diamond-Shaped) | C (80° Diamond-Shape) | V (35° Diamond-Shaped) | - | D (55° Diamond-Shape) | T (Triangle) | V (35° Diamond-Shaped) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | T (Triangle) | T (Triangle) | V (35° Diamond-Shaped) | V (35° Diamond-Shaped) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | V (35° Diamond-Shaped) | V (35° Diamond-Shaped) | C (80° Diamond-Shape) | C (80° Diamond-Shape) | W (Hexagonal Type) | C (80° Diamond-Shape) | C (80° Diamond-Shape) | T (Triangle) | C (80° Diamond-Shape) | D (55° Diamond-Shape) | V (35° Diamond-Shaped) | Other | C (80° Diamond-Shape) |
| Applicable Chip Clearance Angle | Pozidriv | Negative | Negative | Negative | Negative | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Negative | Negative | Negative | Negative | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Negative | - | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Pozidriv | Pozidriv | Pozidriv | Pozidriv | - | Negative | Negative | Pozidriv | - | Pozidriv | - | Pozidriv | Pozidriv | Pozidriv | - |
| Selfishly | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand | Right-hand / Left-hand | Right-hand | Right-hand | Right-hand / Left-hand | Right-hand / Left-hand | Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | No-hand | Left-hand | Right-hand / Left-hand | - | Right-hand | Left-hand | Right-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | No-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand |
| Application | Outer Diameter | Outer Diameter | Outer Diameter | Outer Diameter | Outer Diameter | Outer Diameter | Outer Diameter | Outer Diameter | Outer Diameter | Outer Diameter | Outer Diameter | Outer Diameter | Outer Diameter | Outer Diameter | Outer Diameter | Outer Diameter | Outer Diameter | Outer Diameter | Outer Diameter | Outer Diameter | Outer Diameter | Outer Diameter | Outer Diameter | Outer Diameter | Outer Diameter | Outer Diameter | Outer Diameter | Outer Diameter | Outer Diameter | Outer Diameter | Outer Diameter | Outer Diameter | Outer Diameter | Outer Diameter | Outer Diameter | Outer Diameter | Outer Diameter | Outer Diameter | Outer Diameter | Outer Diameter | Outer Diameter | Outer Diameter | Outer Diameter | Outer Diameter | Outer Diameter |
| Clamp Shape | Back Surface Clamp | Cable clamp | Double Clamp | Wedge Lock | Lever lock | Screw-on | Screw-on | Screw-on | Screw-on | Screw-on | Screw-on | Cable clamp | Pin Lock | Cable clamp | Lever lock | Back Surface Clamp | Screw-on | Screw-on | Screw-on | Cable clamp | - | Lever lock | Lever lock | Cable clamp | Lever lock | Lever lock | Lever lock | Wedge Lock | Cable clamp | Double Clamp | Screw-on | Screw-on | Screw-on | Screw-on | Cable clamp | Pin Lock | Cable clamp | Clamp-on | Clamp-on | Clamp-on | Clamp-on | Screw-on | Screw-on | - | Clamp-on |
| Shank height(mm) | - | 16 ～ 32 | 20 ～ 32 | - | 16 ～ 32 | 8 ～ 25 | - | - | - | 10 ～ 12 | 20 ～ 32 | 20 ～ 25 | - | 20 ～ 25 | 16 ～ 25 | - | - | - | 11 ～ 23 | 32 ～ 40 | - | 20 ～ 32 | 16 ～ 25 | 20 ～ 25 | 16 ～ 32 | - | 12 ～ 25 | - | - | - | - | - | 10 ～ 25 | - | - | - | 16 ～ 32 | - | 10 ～ 12 | 12 ～ 16 | - | 20 | 20 | 25 | 25 |
| Shank width(mm) | - | 16 ～ 32 | 20 ～ 25 | - | 16 ～ 32 | 8 ～ 25 | - | - | - | 10 ～ 12 | 20 ～ 25 | 20 ～ 25 | - | 20 ～ 25 | 16 ～ 25 | - | - | - | 11 ～ 23 | 25 ～ 40 | - | 20 ～ 32 | 16 ～ 25 | 20 ～ 25 | 16 ～ 32 | - | 12 ～ 25 | - | - | - | - | - | 10 ～ 25 | - | - | - | 16 ～ 32 | - | 10 ～ 12 | 12 ～ 16 | - | 20 | 20 | 25 | 25 |
Loading...Tải…
ConfigureTạo
Specification/DimensionsĐặc điểm kỹ thuật / Kích thướcĐặc điểm kỹ thuật / Kích thước
-
Applicable Tip Shape
-
C (80° Diamond-Shape)
-
D (55° Diamond-Shape)
-
V (35° Diamond-Shaped)
-
W (Hexagonal Type)
-
T (Triangle)
-
S (Rectangular)
-
R (Circular)
-
Other
-
C (80° Diamond-Shape)
-
Applicable Chip Clearance Angle
- Negative
- Pozidriv
-
Selfishly
- Right-hand
- Left-hand
- No-hand
-
Application
-
Outer Diameter
-
End Face
-
Profiling
-
Chamfer
-
Post-Grinding
-
Outer Diameter
-
Clamp Shape
- Clamp-on
- Cable clamp
- Pin Lock
- Screw-on
- Double Clamp
- Lever lock
- Wedge Lock
- Back Surface Clamp
- Other
-
Shank height(mm)
-
Shank width(mm)
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy