Square End Mills (HSS)（Machining Application：Side）

• You can add up to 6 items per a category to the compare list. Compare

  

  4-Flute End Mill (M42 HSS)

  YG 1

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  1 ～ 50	2.5 ～ 75	6 ～ 42	4	55 ～ 165	general steel[◎] / Quenched and tempered steel[◎] / Aluminum[○] / Copper[○]	Side	TiAlN / Non-Coated	Square	Standard torsion (30-40°)	-	Cobalt HSS	-	-

  From: 216,421 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  2-Flute End Mill (M42 HSS)

  YG 1

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  1 ～ 50	2.5 ～ 75	6 ～ 42	2	55 ～ 165	general steel[◎] / Quenched and tempered steel[◎] / Aluminum[○] / Copper[○]	Side	TiAlN	Square	Standard torsion (30-40°)	-	Cobalt HSS	-	-

  From: 163,955 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  AG Mill, 4-Flute 4AGE

  NACHI(FUJIKOSHI)

  Capable of high-speed and high-efficiency machining of materials from steel to stainless steel and aluminum. Suitable for side surface machining.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  2.5 ～ 50	7 ～ 70	6 ～ 42	4	50 ～ 160	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	Side	AG	Square	Standard torsion (30-40°)	-	Cobalt HSS	-	-

  From: 641,699 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Super Hard, 4-Flute 4SE

  NACHI(FUJIKOSHI)

  A general-purpose end mill that can process anything from steel to stainless steel and aluminum. Suitable for side surface machining.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  2.5 ～ 50	7 ～ 70	6 ～ 42	4	50 ～ 160	general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Side	Non-Coated	Square	Standard torsion (30-40°)	-	Cobalt HSS	-	-

  From: 258,103 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TiCN Coated Powdered High-Speed Steel Square End Mill, 4-Flute, Short

  MISUMI

  Powdered HSS with high durability is available more cheaply than the cobalt HSS market price

  • Volume Discount

  • TiCN
  • 4 Flutes
  • S (Short)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  3 ～ 25	8 ～ 45	6 ～ 25	4	52 ～ 121	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Side	TiCN	Square	Standard torsion (30-40°)	Available	Powder high-speed steel	-	-

  From: 454,579 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  • On Sale Till 31/03/2025

  

  2-flute, General-purpose, Short Type EDS

  OSG

  High-speed steel square series.Tool Material: Cobalt High-Speed Steel, Work Material: General Steel/Stainless Steel/Cast Iron/Aluminum/CopperCoating: uncoated, standard/Alteration category: Manufacturer's standard product, Number of flutes (pcs.): 2Helix angle: Standard helix (30 to 44°)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  0.45 ～ 60	1.1 ～ 80	6 ～ 42	2	45 ～ 170	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Side	Non-Coated	Square	Standard torsion (30-40°)	-	Cobalt HSS	-	Straight

  From: 543,333 VND
  Special Price
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  4-Flute Long End Mill (M42 HSS)

  YG 1

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  2 ～ 50	10 ～ 125	6 ～ 42	4	60 ～ 215	general steel[◎] / Quenched and tempered steel[◎] / Aluminum[○] / Copper[○]	Side	TiAlN / Non-Coated	Square	Standard torsion (30-40°)	-	Cobalt HSS	-	-

  From: 344,432 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Powdered High-Speed Steel Square End Mill, 2-Flute, Long / Non-Coated Model

  MISUMI

  [Features]·Uncoated long flute length 2-flute type of high speed steel powder square that can expect for durability·Suitable for deep cavity milling·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  • Non-Coated
  • 2 Flutes
  • L (Long)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  3 ～ 25	15 ～ 90	6 ～ 25	2	60 ～ 160	general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Side	Non-Coated	Square	Standard torsion (30-40°)	Available	Powder high-speed steel	-	-

  From: 553,002 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  2-Flute Long End Mill (M42 HSS)

  YG 1

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  2 ～ 50	10 ～ 125	6 ～ 42	2	60 ～ 215	general steel[◎] / Quenched and tempered steel[◎] / Aluminum[○] / Copper[○]	Side	TiAlN / Non-Coated	Square	Standard torsion (30-40°)	-	Cobalt HSS	-	-

  From: 324,171 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  AS Coated Powdered High-Speed Steel Square End Mill, 2-Flute, Regular

  MISUMI

  [Features]·High speed steel powder square regular blade length 2-flute type that can expect for durability·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  • AS
  • 2 Flutes
  • R (Regular)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  1 ～ 25	3.5 ～ 60	6 ～ 25	2	45 ～ 130	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Side	For High Hardness (Silicon Group)	Square	Standard torsion (30-40°)	Available	Powder high-speed steel	-	-

  From: 635,898 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  AG Mill, 4-Flute, Long 4AGEL

  NACHI(FUJIKOSHI)

  Suitable for side processing of wide side surfaces and deep positions.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  3 ～ 40	15 ～ 125	6 ～ 32	4	60 ～ 210	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	Side	AG	Square	Standard torsion (30-40°)	-	Cobalt HSS	-	-

  From: 746,354 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  2-flute, General-purpose, Long Type EDL

  OSG

  General-purpose 2-flute end mill long type using cobalt high-speed steel as the base material. Suitable for deep cuts.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  0.8 ～ 40	6 ～ 110	6 ～ 32	2	50 ～ 195	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Side	Non-Coated	Square	Standard torsion (30-40°)	-	Cobalt HSS	-	Straight

  From: 653,333 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  XPM End Mill (2-Flute Deep-Engraving Medium Type) DE-XPM-EDN

  OSG

  Long shank type 2-flute end mill for deep cutting. The cutting diameter is smaller than the cutting diameter.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  8 ～ 50	20 ～ 75	6 ～ 42	2	80 ～ 350	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	Side	Non-Coated	Square	Standard torsion (30-40°)	-	Powder high-speed steel	-	Straight

  From: 1,195,000 VND
  Days to Ship: Số ngày giao hàng: 17 Day(s)

  17 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  V Coating XPM End Mill (for 2-flute countersinking) VP-ZDS

  OSG

  V coating applied 2-flute short type end mill for counterbore milling using powder metal high-speed steel CPM as the base material.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  3 ～ 20	8 ～ 38	6 ～ 20	2	50 ～ 125	general steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Copper[○]	Side	-	Square	Weak torsion (15 to 25˚)	-	Powder high-speed steel	-	Straight

  From: 1,441,667 VND
  Days to Ship: Số ngày giao hàng: 17 Day(s)

  17 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  3S End Mill, 2-Flute Extra Long Blade

  FUKUDA

  Long blade for deep grooving such as die engraving and wide carving Abundant variety of sizes

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  3 ～ 60	20 ～ 300	6 ～ 42	2	58 ～ 400	Cast Iron[○] / Aluminum[○] / Resin[○] / Other[○] / Other 2[○] / Other 3[○] / Other 4[○]	Side	Non-Coated	Square	Standard torsion (30-40°)	Available	Alloy HSS	-	-

  From: 598,814 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  3S End Mill, 4-Flute (Standard Blade)

  FUKUDA

  Side cutting and groove re-polishing are easy

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  3 ～ 100	13 ～ 80	6 ～ 42	4	51 ～ 180	Cast Iron[○] / Aluminum[○] / Resin[○] / Other[○] / Other 2[○] / Other 3[○] / Other 4[○]	Side	Non-Coated	Square	Standard torsion (30-40°)	Available	Alloy HSS	-	-

  From: 523,274 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  3S End Mill, 4-Flute Extra Long Blade

  FUKUDA

  Long blade for cutting such as deep grooving and wide widths Repolishing is easy

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  3 ～ 60	30 ～ 300	6 ～ 42	4	70 ～ 400	Cast Iron[○] / Aluminum[○] / Resin[○] / Other[○] / Other 2[○] / Other 3[○] / Other 4[○]	Side	Non-Coated	Square	Standard torsion (30-40°)	Available	Alloy HSS	-	-

  From: 72,392 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  LVS2T, 4-Flute Long Flute

  SANKO MFG

  A 4-flute end mill for finish machining. Enables a wide range of side machining and deep engraving, due to the long flute length.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  3 ～ 60	20 ～ 300	6 ～ 42	4	60 ～ 395	general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○]	Side	Non-Coated	Square	Standard torsion (30-40°)	Available	Cobalt HSS	-	-

  From: 526,028 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  4-Flute H.S.S End Mill (Uncoated/TIN/TICN)

  OSG KOREA CORP

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  2 ～ 40	8 ～ 65	6 ～ 32	4	50 ～ 150	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Side	TiCN / Non-Coated	Square	Standard torsion (30-40°)	Available	Cobalt HSS	-	Straight

  From: 220,258 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  AS Coated Powdered High-Speed Steel Square End Mill, 4-Flute, Short

  MISUMI

  AS coating with excellent wear resistance achieves the high-precision finish even in prolonged processing

  • Volume Discount

  • AS
  • 4 Flutes
  • S (Short)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  3 ～ 25	8 ～ 45	6 ～ 25	4	52 ～ 121	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Side	For High Hardness (Silicon Group)	Square	Standard torsion (30-40°)	Available	Powder high-speed steel	-	-

  From: 692,921 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  AS Coated Powdered High-Speed Steel Square End Mill, 4-Flute, Long

  MISUMI

  [Features]·Achieving high durability in a wide range of materials, from raw materials to heat-treated steel·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  • AS
  • 4 Flutes
  • L (Long)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  3 ～ 25	15 ～ 90	6 ～ 25	4	60 ～ 160	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Side	For High Hardness (Silicon Group)	Square	Standard torsion (30-40°)	Available	Powder high-speed steel	-	-

  From: 773,828 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Powdered High-Speed Steel Square End Mill 4-Flute / Long / Non-Coated Type

  MISUMI

  [Features]·Powdered high speed steel powder square uncoated long flute length 4-flute type that can expect for durability·Suitable for deep cavity milling·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  • Non-Coated
  • 4 Flutes
  • L (Long)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  3 ～ 25	15 ～ 90	6 ～ 25	4	60 ～ 160	general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Side	Non-Coated	Square	Standard torsion (30-40°)	Available	Powder high-speed steel	-	-

  From: 600,336 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  High-Speed Steel Square End Mill, 2-Flute / Regular / Non-Coated Model

  MISUMI

  [Features]·High-speed steel uncoated square regular blade length 2-flute type with up to ø50·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  • Non-Coated
  • 2 Flutes
  • R (Regular)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  1 ～ 25	3.5 ～ 60	6 ～ 25	2	45 ～ 130	general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Side	Non-Coated	Square	Standard torsion (30-40°)	Available	Cobalt HSS	-	-

  From: 307,571 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  NATAC, 2-Flute 2NAC

  NACHI(FUJIKOSHI)

  A general-purpose end mill that can process anything from steel to stainless steel and aluminum.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  1 ～ 20	2 ～ 40	6 ～ 20	2	50 ～ 110	general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Side	Non-Coated	Square	Standard torsion (30-40°)	-	Cobalt HSS	-	-

  From: 463,471 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  G 2-Flute End Mill for Key Groove GLKEY

  NACHI(FUJIKOSHI)

  End mill for key groove machining.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  3 ～ 20	6 ～ 20	6 ～ 20	2	50 ～ 85	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	Side	TiN	Square	Weak torsion (15 to 25˚)	-	Cobalt HSS	-	-

  From: 599,994 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  G Standard End Mill, 2-Flute 2GE

  NACHI(FUJIKOSHI)

  [Features]· It is a general-purpose coating end drill for machining from steel and stainless steel to aluminum.· It is suitable for side processing

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  1 ～ 50	2 ～ 70	6 ～ 42	2	50 ～ 160	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	Side	TiN	Square	Standard torsion (30-40°)	-	Cobalt HSS	-	-

  From: 585,240 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  G Standard End Mill, 3-Flute 3GE

  NACHI(FUJIKOSHI)

  General purpose coated end mill.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  3 ～ 40	6 ～ 65	6 ～ 32	3	50 ～ 150	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	Side	TiN	Square	Standard torsion (30-40°)	-	Cobalt HSS	-	-

  From: 639,338 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  G Long End Mill, 4-Flute SL4GE

  NACHI(FUJIKOSHI)

  General purpose coated end mill. Suitable for side processing of wide side surfaces and deep positions.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  3 ～ 40	15 ～ 125	6 ～ 32	4	60 ～ 210	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Side	TiN	Square	Standard torsion (30-40°)	-	Cobalt HSS	-	-

  From: 744,190 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  For 2-Flute Keyway EKD (OH1)

  OSG

  General-purpose 2-flute keyway end mill with a cutting diameter tolerance of 0 to +0.02.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  3 ～ 25	5 ～ 25	6 ～ 25	2	50 ～ 95	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Side	Non-Coated	Square	Weak torsion (15 to 25˚)	-	Cobalt HSS	-	Straight

  From: 598,333 VND
  Days to Ship: Số ngày giao hàng: 17 Day(s)

  17 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  End Mill (Multi-Flute Center Cut Long Type) CC-EML

  OSG

  General-purpose 4-flute end mill center cut long type using cobalt high-speed steel as the base material. Suitable for deep cuts.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  3 ～ 40	15 ～ 110	6 ～ 32	4	60 ～ 195	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Side	Non-Coated	Square	Standard torsion (30-40°)	-	Cobalt HSS	-	Straight

  From: 728,333 VND
  Days to Ship: Số ngày giao hàng: 17 Day(s)

  17 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  V Coating XPM End Mill (2-flute short type) V-XPM-EDS

  OSG

  Made of V coated powder HSS XPM. Provides excellent sharpness and stable tool life.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  1 ～ 40	2.5 ～ 65	6 ～ 32	2	50 ～ 165	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	Side	-	Square	Standard torsion (30-40°)	-	Powder high-speed steel	-	Straight

  From: 1,146,667 VND
  Days to Ship: Số ngày giao hàng: 17 Day(s)

  17 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  V Coating XPM End Mill (2-flute long type) V-XPM-EDL

  OSG

  Made of V coated powder HSS XPM. Provides excellent sharpness and stable tool life.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  3 ～ 30	15 ～ 90	6 ～ 25	2	65 ～ 180	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	Side	-	Square	Standard torsion (30-40°)	-	Powder high-speed steel	-	Straight

  From: 1,416,667 VND
  Days to Ship: Số ngày giao hàng: 17 Day(s)

  17 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  V Coating XPM End Mill (4-flute short type) V-XPM-EMS

  OSG

  Made of V coated powder HSS XPM. Provides excellent sharpness and stable tool life.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  2.5 ～ 40	10 ～ 65	6 ～ 32	4	55 ～ 165	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	Side	-	Square	Standard torsion (30-40°)	-	Powder high-speed steel	-	Straight

  From: 1,263,333 VND
  Days to Ship: Số ngày giao hàng: 17 Day(s)

  17 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  XPM End Mill (4-Flute Deep-Engraving Short Type) DE-XPM-EMS

  OSG

  Long shank type 4-flute end mill for deep cutting. The cutting diameter is smaller than the cutting diameter.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  8 ～ 50	20 ～ 75	6 ～ 42	4	80 ～ 350	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	Side	Non-Coated	Square	Standard torsion (30-40°)	-	Powder high-speed steel	-	Straight

  From: 1,266,667 VND
  Days to Ship: Số ngày giao hàng: 17 Day(s)

  17 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  End Mill (2-Flute for Stainless Steel) SUS-EDS

  OSG

  2-flute end mill short type for stainless steel using cobalt high-speed steel as the base material.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  1.5 ～ 30	4 ～ 55	6 ～ 25	2	45 ～ 125	general steel[○] / Stainless Steel[◎]	Side	Non-Coated	Square	Standard torsion (30-40°)	-	Cobalt HSS	-	Straight

  From: 666,667 VND
  Days to Ship: Số ngày giao hàng: 17 Day(s)

  17 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  3S End Mill, 2-Flute (Standard Blade)

  FUKUDA

  Wide range of blade lengths and an abundance of sizes

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  3 ～ 100	10 ～ 80	6 ～ 42	2	48 ～ 180	Cast Iron[○] / Aluminum[○] / Resin[○] / Other[○] / Other 2[○] / Other 3[○] / Other 4[○]	Side	Non-Coated	Square	Standard torsion (30-40°)	Available	Alloy HSS	-	-

  From: 504,388 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  3S End Mill, 2-Flute Long Blade

  FUKUDA

  Long blade for deep grooving such as die engraving and wide carving Abundant variety of sizes

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  3 ～ 50	15 ～ 120	6 ～ 42	2	53 ～ 215	Cast Iron[○] / Aluminum[○] / Resin[○] / Other[○] / Other 2[○] / Other 3[○] / Other 4[○]	Side	Non-Coated	Square	Standard torsion (30-40°)	Available	Alloy HSS	-	-

  From: 598,814 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  3S End Mill, 4-Flute Long Blade

  FUKUDA

  Long blade for cutting such as deep grooving and wide widths Repolishing is easy

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  3 ～ 50	20 ～ 125	6 ～ 42	4	58 ～ 220	Cast Iron[○] / Aluminum[○] / Resin[○] / Other[○] / Other 2[○] / Other 3[○] / Other 4[○]	Side	Non-Coated	Square	Standard torsion (30-40°)	Available	Alloy HSS	-	-

  From: 655,272 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SS2TM S Coating Estech 2-Flute Regular Blade

  SANKO MFG

  [Features]· 2-flute finishing endmill with TiCN coating.· Can be used widely for milling of grooves, sides, holes, etc.· Enables a wide range of machining applications, due to the regular flute length.· High grade powder metallurgy HSS with S-coating.· Enables a wide range of machining applications, due to the regular flute length.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  3 ～ 20	10 ～ 55	6 ～ 20	2	60 ～ 130	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[○]	Side	TiCN	Square	Standard torsion (30-40°)	Available	Powder high-speed steel	-	-

  From: 697,174 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  STEC2TL ESTECH 2-Flute Long Blade

  SANKO MFG

  [Features]· A 2-flute end mill for finish machining.· Can be used widely for milling of grooves, sides, holes, etc.· Uses high grade powder metallurgy HSS.· Enables a wide range of side machining and deep engraving, due to the long flute length.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  3 ～ 30	15 ～ 105	6 ～ 25	2	55 ～ 185	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[○] / Titanium[○]	Side	Non-Coated	Square	Standard torsion (30-40°)	Available	Powder high-speed steel	-	-

  From: 826,418 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  LVS2T, 2-Flute Long Flute

  SANKO MFG

  A 2-flute end mill for finish machining. Enables a wide range of side machining and deep engraving, due to the long flute length.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  3 ～ 50	20 ～ 250	6 ～ 42	2	60 ～ 345	general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○]	Side	Non-Coated	Square	Standard torsion (30-40°)	Available	Cobalt HSS	-	-

  From: 493,471 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  KHB4TS Hybrid Short 4-Flute Blade

  SANKO MFG

  [Features]· A 4-flute end mill for finish machining.· Abrasion resistance is excellent and high efficiency machining is possible.· A next-generation end mill that combines the characteristics of HSS (toughness, etc.) and carbide (high efficiency, etc.).· Can be used from raw materials to high hardness materials, hard to chip, and usable without worries for long hours.· Furthermore, machining speed is equivalent to carbide, providing "high functionality and safety".· Processing of high-speed steel substrate creates a cost difference from carbide substrates, reducing costs.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  5 ～ 30	15 ～ 55	8 ～ 25	4	60 ～ 135	general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[◎] / Stainless Steel[○] / Cast Iron[○] / Titanium[○]	Side	For High Hardness (Silicon Group)	Square	Standard torsion (30-40°)	Available	Cobalt HSS	-	-

  From: 838,222 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  HSP Long High Spiral End Mill MA

  ASAHI TOOLS

  Long flute specifications.Adoption of the recessed center shape allows the number of regrinding increased.[Processing Application (Processing Shape)]Side/Groove, "Tool Material": High Speed Steel, "Work Material": General Steel/Heat-Treated Steel/Stainless Steel/Cast Iron/Aluminum/Copper/Resin, "Helix Angle": Weak Helix (1 to 29°)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  10 ～ 60	10 ～ 200	10 ～ 32	4 ～ 6	90 ～ 280	general steel[○] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Resin[○]	Side	Non-Coated	Square	Weak torsion (15 to 25˚)	Available	Alloy HSS	-	-

  From: 3,885,596 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Corner C End Mill CEM

  EIKOSHA

  Square end mill (HSS) with C-surfaces on the blade corners.[Features]· An end mill with 45° C-face on the corners.· Machinability is also improved thanks to adoption of twisted blade.[Applications]· End mill for processing chamfered surfaces, etc. to reinforce corners of the processed workpiece.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  3 ～ 16	8 ～ 32	6 ～ 16	2	45 ～ 100	general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Side	Non-Coated	For Keyway	Standard torsion (30-40°)	Available	Cobalt HSS	-	-

  From: 968,083 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  2-Flute Keyway End Mill

  YG 1

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  5 ～ 10	8 ～ 15	8 ～ 10	2	60 ～ 65	general steel[◎] / Quenched and tempered steel[◎] / Aluminum[○] / Copper[○]	Side	-	Square	Weak torsion (15 to 25˚)	-	Cobalt HSS	-	-

  From: 489,995 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s)

  7 Day(s)

BrandNhãn hiệu
Product SeriesDòng sản phẩm
From
Days to ShipSố ngày giao hàng
SpecificationsĐặc điểm kĩ thuật
Blade diameter (D)(φ)
Blade length (ℓ)(mm)
Shank diameter (d)(mm)
Number of flutes(sheet)
Overall Length (L)(mm)
work material
Machining Application
Coating
Blade shape type
Torsion Angle (θ)
Base Blade Y/N
Tool Material Type
Underneck length (ℓ1)(mm)
shank

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare On Sale Till 31/03/2025	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
BrandNhãn hiệu	YG 1	YG 1	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	MISUMI	OSG	YG 1	MISUMI	YG 1	MISUMI	NACHI(FUJIKOSHI)	OSG	OSG	OSG	FUKUDA	FUKUDA	FUKUDA	SANKO MFG	OSG KOREA CORP	MISUMI	MISUMI	MISUMI	MISUMI	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	OSG	OSG	OSG	OSG	OSG	OSG	OSG	FUKUDA	FUKUDA	FUKUDA	SANKO MFG	SANKO MFG	SANKO MFG	SANKO MFG	ASAHI TOOLS	EIKOSHA	YG 1
Product SeriesDòng sản phẩm	4-Flute End Mill (M42 HSS)	2-Flute End Mill (M42 HSS)	AG Mill, 4-Flute 4AGE	Super Hard, 4-Flute 4SE	TiCN Coated Powdered High-Speed Steel Square End Mill, 4-Flute, Short	2-flute, General-purpose, Short Type EDS	4-Flute Long End Mill (M42 HSS)	Powdered High-Speed Steel Square End Mill, 2-Flute, Long / Non-Coated Model	2-Flute Long End Mill (M42 HSS)	AS Coated Powdered High-Speed Steel Square End Mill, 2-Flute, Regular	AG Mill, 4-Flute, Long 4AGEL	2-flute, General-purpose, Long Type EDL	XPM End Mill (2-Flute Deep-Engraving Medium Type) DE-XPM-EDN	V Coating XPM End Mill (for 2-flute countersinking) VP-ZDS	3S End Mill, 2-Flute Extra Long Blade	3S End Mill, 4-Flute (Standard Blade)	3S End Mill, 4-Flute Extra Long Blade	LVS2T, 4-Flute Long Flute	4-Flute H.S.S End Mill (Uncoated/TIN/TICN)	AS Coated Powdered High-Speed Steel Square End Mill, 4-Flute, Short	AS Coated Powdered High-Speed Steel Square End Mill, 4-Flute, Long	Powdered High-Speed Steel Square End Mill 4-Flute / Long / Non-Coated Type	High-Speed Steel Square End Mill, 2-Flute / Regular / Non-Coated Model	NATAC, 2-Flute 2NAC	G 2-Flute End Mill for Key Groove GLKEY	G Standard End Mill, 2-Flute 2GE	G Standard End Mill, 3-Flute 3GE	G Long End Mill, 4-Flute SL4GE	For 2-Flute Keyway EKD (OH1)	End Mill (Multi-Flute Center Cut Long Type) CC-EML	V Coating XPM End Mill (2-flute short type) V-XPM-EDS	V Coating XPM End Mill (2-flute long type) V-XPM-EDL	V Coating XPM End Mill (4-flute short type) V-XPM-EMS	XPM End Mill (4-Flute Deep-Engraving Short Type) DE-XPM-EMS	End Mill (2-Flute for Stainless Steel) SUS-EDS	3S End Mill, 2-Flute (Standard Blade)	3S End Mill, 2-Flute Long Blade	3S End Mill, 4-Flute Long Blade	SS2TM S Coating Estech 2-Flute Regular Blade	STEC2TL ESTECH 2-Flute Long Blade	LVS2T, 2-Flute Long Flute	KHB4TS Hybrid Short 4-Flute Blade	HSP Long High Spiral End Mill MA	Corner C End Mill CEM	2-Flute Keyway End Mill
From	216,421 VND	163,955 VND	641,699 VND	258,103 VND	454,579 VND	543,333 VND Special Price On Sale Till 31/03/2025	344,432 VND	553,002 VND	324,171 VND	635,898 VND	746,354 VND	653,333 VND	1,195,000 VND	1,441,667 VND	598,814 VND	523,274 VND	72,392 VND	526,028 VND	220,258 VND	692,921 VND	773,828 VND	600,336 VND	307,571 VND	463,471 VND	599,994 VND	585,240 VND	639,338 VND	744,190 VND	598,333 VND	728,333 VND	1,146,667 VND	1,416,667 VND	1,263,333 VND	1,266,667 VND	666,667 VND	504,388 VND	598,814 VND	655,272 VND	697,174 VND	826,418 VND	493,471 VND	838,222 VND	3,885,596 VND	968,083 VND	489,995 VND
Days to ShipSố ngày giao hàng	Same day or more	Same day or more	4 Day(s) or more	Same day or more	4 Day(s) or more	Same day or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	Same day or more	6 Day(s) or more	Same day or more	17 Day(s)	17 Day(s)	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	Same day or more	6 Day(s) or more	6 Day(s) or more	4 Day(s) or more	6 Day(s) or more	6 Day(s) or more	17 Day(s)	17 Day(s)	17 Day(s)	17 Day(s)	17 Day(s)	17 Day(s)	17 Day(s)	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	8 Day(s) or more	6 Day(s) or more	6 Day(s) or more	7 Day(s)
SpecificationsĐặc điểm kĩ thuật					TiCN 4 Flutes S (Short)			Non-Coated 2 Flutes L (Long)		AS 2 Flutes R (Regular)										AS 4 Flutes S (Short)	AS 4 Flutes L (Long)	Non-Coated 4 Flutes L (Long)	Non-Coated 2 Flutes R (Regular)
Blade diameter (D)(φ)	1 ～ 50	1 ～ 50	2.5 ～ 50	2.5 ～ 50	3 ～ 25	0.45 ～ 60	2 ～ 50	3 ～ 25	2 ～ 50	1 ～ 25	3 ～ 40	0.8 ～ 40	8 ～ 50	3 ～ 20	3 ～ 60	3 ～ 100	3 ～ 60	3 ～ 60	2 ～ 40	3 ～ 25	3 ～ 25	3 ～ 25	1 ～ 25	1 ～ 20	3 ～ 20	1 ～ 50	3 ～ 40	3 ～ 40	3 ～ 25	3 ～ 40	1 ～ 40	3 ～ 30	2.5 ～ 40	8 ～ 50	1.5 ～ 30	3 ～ 100	3 ～ 50	3 ～ 50	3 ～ 20	3 ～ 30	3 ～ 50	5 ～ 30	10 ～ 60	3 ～ 16	5 ～ 10
Blade length (ℓ)(mm)	2.5 ～ 75	2.5 ～ 75	7 ～ 70	7 ～ 70	8 ～ 45	1.1 ～ 80	10 ～ 125	15 ～ 90	10 ～ 125	3.5 ～ 60	15 ～ 125	6 ～ 110	20 ～ 75	8 ～ 38	20 ～ 300	13 ～ 80	30 ～ 300	20 ～ 300	8 ～ 65	8 ～ 45	15 ～ 90	15 ～ 90	3.5 ～ 60	2 ～ 40	6 ～ 20	2 ～ 70	6 ～ 65	15 ～ 125	5 ～ 25	15 ～ 110	2.5 ～ 65	15 ～ 90	10 ～ 65	20 ～ 75	4 ～ 55	10 ～ 80	15 ～ 120	20 ～ 125	10 ～ 55	15 ～ 105	20 ～ 250	15 ～ 55	10 ～ 200	8 ～ 32	8 ～ 15
Shank diameter (d)(mm)	6 ～ 42	6 ～ 42	6 ～ 42	6 ～ 42	6 ～ 25	6 ～ 42	6 ～ 42	6 ～ 25	6 ～ 42	6 ～ 25	6 ～ 32	6 ～ 32	6 ～ 42	6 ～ 20	6 ～ 42	6 ～ 42	6 ～ 42	6 ～ 42	6 ～ 32	6 ～ 25	6 ～ 25	6 ～ 25	6 ～ 25	6 ～ 20	6 ～ 20	6 ～ 42	6 ～ 32	6 ～ 32	6 ～ 25	6 ～ 32	6 ～ 32	6 ～ 25	6 ～ 32	6 ～ 42	6 ～ 25	6 ～ 42	6 ～ 42	6 ～ 42	6 ～ 20	6 ～ 25	6 ～ 42	8 ～ 25	10 ～ 32	6 ～ 16	8 ～ 10
Number of flutes(sheet)	4	2	4	4	4	2	4	2	2	2	4	2	2	2	2	4	4	4	4	4	4	4	2	2	2	2	3	4	2	4	2	2	4	4	2	2	2	4	2	2	2	4	4 ～ 6	2	2
Overall Length (L)(mm)	55 ～ 165	55 ～ 165	50 ～ 160	50 ～ 160	52 ～ 121	45 ～ 170	60 ～ 215	60 ～ 160	60 ～ 215	45 ～ 130	60 ～ 210	50 ～ 195	80 ～ 350	50 ～ 125	58 ～ 400	51 ～ 180	70 ～ 400	60 ～ 395	50 ～ 150	52 ～ 121	60 ～ 160	60 ～ 160	45 ～ 130	50 ～ 110	50 ～ 85	50 ～ 160	50 ～ 150	60 ～ 210	50 ～ 95	60 ～ 195	50 ～ 165	65 ～ 180	55 ～ 165	80 ～ 350	45 ～ 125	48 ～ 180	53 ～ 215	58 ～ 220	60 ～ 130	55 ～ 185	60 ～ 345	60 ～ 135	90 ～ 280	45 ～ 100	60 ～ 65
work material	general steel[◎] / Quenched and tempered steel[◎] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / Aluminum[○] / Copper[○]	general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	general steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Copper[○]	Cast Iron[○] / Aluminum[○] / Resin[○] / Other[○] / Other 2[○] / Other 3[○] / Other 4[○]	Cast Iron[○] / Aluminum[○] / Resin[○] / Other[○] / Other 2[○] / Other 3[○] / Other 4[○]	Cast Iron[○] / Aluminum[○] / Resin[○] / Other[○] / Other 2[○] / Other 3[○] / Other 4[○]	general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○]	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	general steel[○] / Stainless Steel[◎]	Cast Iron[○] / Aluminum[○] / Resin[○] / Other[○] / Other 2[○] / Other 3[○] / Other 4[○]	Cast Iron[○] / Aluminum[○] / Resin[○] / Other[○] / Other 2[○] / Other 3[○] / Other 4[○]	Cast Iron[○] / Aluminum[○] / Resin[○] / Other[○] / Other 2[○] / Other 3[○] / Other 4[○]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[○]	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[○] / Titanium[○]	general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○]	general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[◎] / Stainless Steel[○] / Cast Iron[○] / Titanium[○]	general steel[○] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Resin[○]	general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / Aluminum[○] / Copper[○]
Machining Application	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side
Coating	TiAlN / Non-Coated	TiAlN	AG	Non-Coated	TiCN	Non-Coated	TiAlN / Non-Coated	Non-Coated	TiAlN / Non-Coated	For High Hardness (Silicon Group)	AG	Non-Coated	Non-Coated	-	Non-Coated	Non-Coated	Non-Coated	Non-Coated	TiCN / Non-Coated	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	Non-Coated	Non-Coated	Non-Coated	TiN	TiN	TiN	TiN	Non-Coated	Non-Coated	-	-	-	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	TiCN	Non-Coated	Non-Coated	For High Hardness (Silicon Group)	Non-Coated	Non-Coated	-
Blade shape type	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	For Keyway	Square
Torsion Angle (θ)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Weak torsion (15 to 25˚)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Weak torsion (15 to 25˚)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Weak torsion (15 to 25˚)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Weak torsion (15 to 25˚)	Standard torsion (30-40°)	Weak torsion (15 to 25˚)
Base Blade Y/N	-	-	-	-	Available	-	-	Available	-	Available	-	-	-	-	Available	Available	Available	Available	Available	Available	Available	Available	Available	-	-	-	-	-	-	-	-	-	-	-	-	Available	Available	Available	Available	Available	Available	Available	Available	Available	-
Tool Material Type	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Powder high-speed steel	Cobalt HSS	Cobalt HSS	Powder high-speed steel	Cobalt HSS	Powder high-speed steel	Cobalt HSS	Cobalt HSS	Powder high-speed steel	Powder high-speed steel	Alloy HSS	Alloy HSS	Alloy HSS	Cobalt HSS	Cobalt HSS	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Cobalt HSS	Alloy HSS	Alloy HSS	Alloy HSS	Powder high-speed steel	Powder high-speed steel	Cobalt HSS	Cobalt HSS	Alloy HSS	Cobalt HSS	Cobalt HSS
Underneck length (ℓ1)(mm)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
shank	-	-	-	-	-	Straight	-	-	-	-	-	Straight	Straight	Straight	-	-	-	-	Straight	-	-	-	-	-	-	-	-	-	Straight	Straight	Straight	Straight	Straight	Straight	Straight	-	-	-	-	-	-	-	-	-	-

Loading...Tải…