Square HSS End Mills（work material：Stainless Steel Page2）

• You can add up to 6 items per a category to the compare list. Compare

  

  AS Coated Powdered High-Speed Steel Roughing End Mill, 45° Spiral, Long, Center Cut

  MISUMI

  The combination of AS coating and 45° helix achieves the astonishing durability for everything from general steel to stainless steel!

  • Volume Discount

  • AS
  • 4 Flutes
  • L (Long)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  10 ～ 30	45 ～ 90	10 ～ 25	4 ～ 5	95 ～ 166	Stainless Steel[◎]	Plane / Side / Groove / Inclined Cuts	For High Hardness (Silicon Group)	Roughing	Powerful Torsion (45°-60°)	Available	Powder high-speed steel	-	-

  From: 1,613,757 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  AS Coated Powdered High-Speed Steel Roughing End Mill, 45° Spiral, Short, Long Shank, Center Cut

  MISUMI

  The combination of AS coating and 45° helix achieves the astonishing durability for everything from general steel to stainless steel!

  • Volume Discount

  • AS
  • 3 Flutes
  • S (Short)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  6 ～ 30	11 ～ 45	6 ～ 25	3 ～ 4	80 ～ 160	Stainless Steel[◎]	Plane / Side / Groove / Inclined Cuts	For High Hardness (Silicon Group)	Roughing	Powerful Torsion (45°-60°)	Available	Powder high-speed steel	-	-

  From: 1,341,218 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  AS Coated Powdered High-Speed Steel Roughing End Mill, Short, Center Cut

  MISUMI

  [Features]·Demonstrates outstanding durability even during high-speed machining where load on tool is large·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  • AS
  • 4 Flutes
  • S (Short)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  5 ～ 32	13 ～ 53	6 ～ 32	3 ～ 6	57 ～ 133	Stainless Steel[◎]	Plane / Side / Groove / Inclined Cuts	For High Hardness (Silicon Group)	Roughing	Standard torsion (30-40°)	Available	Powder high-speed steel	-	-

  From: 1,028,851 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  AS Coated Powdered High-Speed Steel Roughing End Mill, Regular, Center Cut

  MISUMI

  [Features]·Demonstrates outstanding durability even during high-speed machining where load on tool is large·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  • AS
  • 4 Flutes
  • R (Regular)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  6 ～ 30	19 ～ 68	6 ～ 25	3 ～ 5	63 ～ 144	Stainless Steel[◎]	Plane / Side / Groove / Inclined Cuts	For High Hardness (Silicon Group)	Roughing	Standard torsion (30-40°)	Available	Powder high-speed steel	-	-

  From: 1,202,550 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  AS Coated Powdered High-Speed Steel Roughing End Mill, Long, Center Cut

  MISUMI

  [Features]·Demonstrates outstanding durability even during high-speed machining where load on tool is large·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  • AS
  • 4 Flutes
  • L (Long)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  10 ～ 30	45 ～ 90	10 ～ 25	4 ～ 5	95 ～ 166	Stainless Steel[◎]	Plane / Side / Groove / Inclined Cuts	For High Hardness (Silicon Group)	Roughing	Standard torsion (30-40°)	Available	Powder high-speed steel	-	-

  From: 1,578,099 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  AS Coated Powdered High-Speed Steel Roughing End Mill, Short, Long Shank, Center Cut

  MISUMI

  [Features]·Demonstrates outstanding durability even during high-speed machining where load on tool is large·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  • AS
  • 3 Flutes
  • S (Short)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  6 ～ 30	11 ～ 45	6 ～ 25	3 ～ 4	80 ～ 160	Stainless Steel[◎]	Plane / Side / Groove / Inclined Cuts	For High Hardness (Silicon Group)	Roughing	Standard torsion (30-40°)	Available	Powder high-speed steel	-	-

  From: 1,250,302 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TiCN Coated Powdered High-Speed Steel Roughing End Mill, Long, Center Cut

  MISUMI

  [Features]·High speed steel powder roughing long flute length type that can expect durability·Coating with excellent lubricity is effective for wet machining and machining at cutting speeds of 40 m/min or less·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  • TiCN
  • 4 Flutes
  • L (Long)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  10 ～ 30	45 ～ 90	10 ～ 25	4 ～ 5	95 ～ 166	Stainless Steel[○]	Plane / Side / Groove / Inclined Cuts	TiCN	Roughing	Standard torsion (30-40°)	Available	Powder high-speed steel	-	-

  From: 1,228,408 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TiCN Coated Powdered High-Speed Steel Roughing End Mill, Short, Long Shank, Center Cut

  MISUMI

  [Features]·Long shank type of high speed steel powder that can expect durability·Coating with excellent lubricity is effective for wet machining and machining at cutting speeds of 40 m/min or less·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  • TiCN
  • 3 Flutes
  • S (Short)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  6 ～ 30	11 ～ 45	6 ～ 25	3 ～ 4	80 ～ 160	Stainless Steel[○]	Plane / Side / Groove / Inclined Cuts	TiCN	Roughing	Standard torsion (30-40°)	Available	Powder high-speed steel	-	-

  From: 1,042,167 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  AS Coated Powdered High-Speed Steel Square End Mill, 3-Flute, 50° Spiral, Short

  MISUMI

  [Features]·High helix type with excellent machinability, so it can be used for a wide range of applications from heavy cutting to finish cutting·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  • AS
  • 3 Flutes
  • S (Short)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  6 ～ 25	15 ～ 50	8 ～ 25	3	65 ～ 140	Stainless Steel[◎]	Plane / Side / Groove / Inclined Cuts / Countersinking	For High Hardness (Silicon Group)	Square	Powerful Torsion (45°-60°)	Available	Powder high-speed steel	-	-

  From: 814,907 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  AS Coated Powdered High-Speed Steel Square End Mill, 4-Flute, 50° Spiral, Short

  MISUMI

  [Features]·High helix type with excellent machinability, so it can be used for a wide range of applications from heavy cutting to finish cutting·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  • AS
  • 4 Flutes
  • S (Short)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  6 ～ 25	15 ～ 50	8 ～ 25	4	65 ～ 140	Stainless Steel[◎]	Plane / Side / Groove / Countersinking	For High Hardness (Silicon Group)	Square	Powerful Torsion (45°-60°)	Available	Powder high-speed steel	-	-

  From: 838,470 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  AS Coated Powdered High-Speed Steel Square End Mill, 3-Flute, 50° Spiral, Short, with Nicked Peripheral Cutting Edge

  MISUMI

  [Features]·Cutting force is reduced because nicks on peripheral edge divide cutting chips·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  • AS
  • 3 Flutes
  • S (Short)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  6 ～ 20	15 ～ 45	8 ～ 20	3	65 ～ 125	Stainless Steel[◎]	Plane / Side / Groove / Inclined Cuts / Countersinking	For High Hardness (Silicon Group)	Square	Powerful Torsion (45°-60°)	Available	Powder high-speed steel	-	-

  From: 1,048,452 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  AS Coated Powdered High-Speed Steel Square End Mill, 4-Flute, 50° Spiral, Short, with Nicked Peripheral Cutting Edge

  MISUMI

  [Features]·Cutting force is reduced because nicks on peripheral edge divide cutting chips·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  • AS
  • 4 Flutes
  • S (Short)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  6 ～ 20	15 ～ 45	8 ～ 20	4	65 ～ 125	Stainless Steel[◎]	Plane / Side / Groove / Countersinking	For High Hardness (Silicon Group)	Square	Powerful Torsion (45°-60°)	Available	Powder high-speed steel	-	-

  From: 1,017,590 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  AS Coated Powdered High-Speed Steel Square End Mill, 2-Flute, Short

  MISUMI

  [Features]·High speed steel powder square short blade length 2-flute type that can expect for durability·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  • AS
  • 2 Flutes
  • S (Short)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  1 ～ 40	2.5 ～ 65	6 ～ 32	2	45 ～ 150	Stainless Steel[○]	Plane / Side / Groove / Countersinking	For High Hardness (Silicon Group)	Square	Standard torsion (30-40°)	Available	Powder high-speed steel	-	-

  From: 635,898 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  AS Coated Powdered High-Speed Steel Square End Mill, 2-Flute, Long

  MISUMI

  [Features]·High speed steel powder square long blade length type that can expect for durability·Suitable for deep cavity milling·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  • AS
  • 2 Flutes
  • L (Long)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  3 ～ 20	15 ～ 75	6 ～ 20	2	60 ～ 140	Stainless Steel[○]	Plane / Side / Groove / Countersinking	For High Hardness (Silicon Group)	Square	Standard torsion (30-40°)	Available	Powder high-speed steel	-	-

  From: 731,080 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  AS Coated Powdered High-Speed Steel Square End Mill, 4-Flute, Regular

  MISUMI

  [Features]·Achieving high durability in a wide range of materials, from raw materials to heat-treated steel·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  • AS
  • 4 Flutes
  • R (Regular)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  3 ～ 25	12 ～ 68	6 ～ 25	4	55 ～ 144	Stainless Steel[○]	Plane / Side / Groove / Countersinking	For High Hardness (Silicon Group)	Square	Standard torsion (30-40°)	Available	Powder high-speed steel	-	-

  From: 708,977 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  AS Coated Powdered High-Speed Steel Square End Mill, 4-Flute, Long

  MISUMI

  [Features]·Achieving high durability in a wide range of materials, from raw materials to heat-treated steel·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  • AS
  • 4 Flutes
  • L (Long)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  3 ～ 25	15 ～ 90	6 ～ 25	4	60 ～ 160	Stainless Steel[○]	Plane / Side / Groove / Countersinking	For High Hardness (Silicon Group)	Square	Standard torsion (30-40°)	Available	Powder high-speed steel	-	-

  From: 773,828 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TiCN Coated Powdered High-Speed Steel Square End Mill, 2-Flute, Short

  MISUMI

  [Features]·High speed steel powder roughing short flute length type that can expect for durability·Coating with excellent lubricity is effective for wet machining and machining at cutting speeds of 40 m/min or less·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  • TiCN
  • 2 Flutes
  • S (Short)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  1 ～ 40	2.5 ～ 65	6 ～ 32	2	45 ～ 150	Stainless Steel[○]	Plane / Side / Groove / Countersinking	TiCN	Square	Standard torsion (30-40°)	Available	Powder high-speed steel	-	-

  From: 446,012 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TiCN Coated Powdered High-Speed Steel Square End Mill, 2-Flute, Regular

  MISUMI

  [Features]·High speed steel powder roughing regular flute length type that can expect for durability·Coating with excellent lubricity is effective for wet machining and machining at cutting speeds of 40 m/min or less·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  • TiCN
  • 2 Flutes
  • R (Regular)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  1 ～ 25	3.5 ～ 60	6 ～ 25	2	45 ～ 130	Stainless Steel[○]	Plane / Side / Groove / Countersinking	TiCN	Square	Standard torsion (30-40°)	Available	Powder high-speed steel	-	-

  From: 446,012 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TiCN Coated Powdered High-Speed Steel Square End Mill, 2-Flute, Long

  MISUMI

  [Features]·High speed steel powder roughing long flute length type that can expect durability·Suitable for deep cavity milling·Coating with excellent lubricity is effective for wet machining and machining at cutting speeds of 40 m/min or less·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  • TiCN
  • 2 Flutes
  • L (Long)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  3 ～ 25	15 ～ 90	6 ～ 25	2	60 ～ 160	Stainless Steel[○]	Plane / Side / Groove / Countersinking	TiCN	Square	Standard torsion (30-40°)	Available	Powder high-speed steel	-	-

  From: 436,855 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TiCN Coated Powdered High-Speed Steel Square End Mill, 4-Flute / Regular

  MISUMI

  [Features]·High speed steel powder roughing long flute length 4-flute type that can expect for durability·Suitable for deep cavity milling·Coating with excellent lubricity is effective for wet machining and machining at cutting speeds of 40 m/min or less·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  • TiCN
  • 4 Flutes
  • L (Long)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  3 ～ 25	15 ～ 90	6 ～ 25	4	60 ～ 160	Stainless Steel[○]	Plane / Side / Groove / Countersinking	TiCN	Square	Standard torsion (30-40°)	Available	Powder high-speed steel	-	-

  From: 454,579 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  AG Mill, Heavy AGHV

  NACHI(FUJIKOSHI)

  Capable of high-efficiency roughing of materials from steel to stainless steel and aluminum. Suitable for medium finishing.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  3 ～ 50	9 ～ 70	6 ～ 42	4 ～ 6	50 ～ 160	Stainless Steel[◎]	Side / Groove	AG	Roughing	Standard torsion (30-40°)	-	Cobalt HSS	-	-

  From: 815,796 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  G Standard End Mill, 4-Flute 4GE

  NACHI(FUJIKOSHI)

  It is a general-purpose coating end drill for machining from steel and stainless steel to aluminum. Suitable for side surface machining.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  2.5 ～ 50	7 ～ 70	6 ～ 42	4	50 ～ 160	Stainless Steel[○]	Plane / Side / Groove / Inclined Cuts	TiN	Square	Standard torsion (30-40°)	-	Cobalt HSS	-	-

  From: 659,797 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  G Long End Mill, 2-Flute SL2GE

  NACHI(FUJIKOSHI)

  Capable of machining from steel and stainless steel to aluminum. Suitable for grooving deep grooves or in deep locations.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  3 ～ 40	15 ～ 125	6 ～ 32	2	60 ～ 210	Stainless Steel[○]	Plane / Side / Groove / Inclined Cuts	TiN	Square	Standard torsion (30-40°)	-	Cobalt HSS	-	-

  From: 690,485 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SG-FAX End Mill, Long, 2-Flute SL2SGE

  NACHI(FUJIKOSHI)

  General purpose coated end mill.[Features]· Capable of machining from steel and stainless steel to aluminum.· Suitable for grooving deep grooves or in deep locations.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  3 ～ 30	15 ～ 90	6 ～ 25	2	65 ～ 180	Stainless Steel[◎]	Plane / Side / Groove / Inclined Cuts	TiCN	Square	Standard torsion (30-40°)	-	Alloy HSS	-	-

  From: 1,086,681 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SG-FAX End Mill, 2-Flute 2SGE

  NACHI(FUJIKOSHI)

  Capable of high-speed and high-efficiency machining of materials from steel to stainless steel and aluminum.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  1 ～ 50	2 ～ 70	6 ～ 42	2	50 ～ 160	Stainless Steel[◎]	Plane / Side / Groove / Inclined Cuts	TiCN	Square	Standard torsion (30-40°)	-	Alloy HSS	-	-

  From: 838,812 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SG-FAX Heavy SGHV

  NACHI(FUJIKOSHI)

  Capable of high-efficiency roughing of materials from steel to stainless steel and aluminum. Suitable for medium finishing.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  3 ～ 50	9 ～ 70	6 ～ 42	4 ～ 6	50 ～ 160	Stainless Steel[◎]	Side / Groove	TiCN	Roughing	Standard torsion (30-40°)	-	Alloy HSS	-	-

  From: 1,138,022 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SG-FAX Roughing End Mill, Long Shank, SLX Type SGFREU

  NACHI(FUJIKOSHI)

  Capable of high-efficiency roughing of materials from steel to stainless steel and aluminum. The notches have a fine pitch.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  16 ～ 50	32 ～ 75	16 ～ 42	4 ～ 6	200 ～ 350	Stainless Steel[◎]	Side / Groove	TiCN	Roughing	Standard torsion (30-40°)	-	Alloy HSS	72 ～ 113	-

  From: 3,698,328 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SG-FAX End Mill, 4-Flute 4SGE

  NACHI(FUJIKOSHI)

  Capable of high-speed and high-efficiency machining of materials from steel to stainless steel and aluminum. Suitable for side surface machining.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  12 ～ 28	30 ～ 55	12 ～ 25	4	80 ～ 135	Stainless Steel[◎]	Plane / Side / Groove / Inclined Cuts	Non-Coated	Square	Standard torsion (30-40°)	-	Alloy HSS	-	-

  From: 1,489,000 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SG-FAX Heavy Long SGLHV

  NACHI(FUJIKOSHI)

  Capable of roughing of materials from steel to stainless steel and aluminum. Suitable for medium finishing.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  3 ～ 50	15 ～ 145	6 ～ 42	4 ～ 6	60 ～ 230	Stainless Steel[○]	Side / Groove	TiCN	Roughing	Standard torsion (30-40°)	-	Alloy HSS	-	-

  From: 1,717,165 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SG-FAX Roughing End Mill, Long Shank, SX Type SGFREX

  NACHI(FUJIKOSHI)

  Capable of high-efficiency roughing of materials from steel to stainless steel and aluminum. The notches have a fine pitch.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  16 ～ 50	32 ～ 75	16 ～ 42	4 ～ 6	170 ～ 280	Stainless Steel[◎]	Side / Groove	TiCN	Roughing	Standard torsion (30-40°)	-	Alloy HSS	64 ～ 100	-

  From: 3,501,411 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  AG Mill, Heavy, Long AGLHV

  NACHI(FUJIKOSHI)

  Capable of roughing of materials from steel to stainless steel and aluminum. Suitable for medium finishing.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  3 ～ 50	15 ～ 145	6 ～ 42	4 ～ 6	60 ～ 230	Stainless Steel[○]	Side / Groove	TiAlN	Roughing	Standard torsion (30-40°)	-	Cobalt HSS	-	-

  From: 1,004,450 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  AG Mill, Roughing, Short AGRES

  NACHI(FUJIKOSHI)

  Capable of high-efficiency roughing of materials from steel to stainless steel and aluminum. The notches have a fine pitch.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  6 ～ 50	11 ～ 75	6 ～ 42	4 ～ 6	80 ～ 220	Stainless Steel[◎]	Side / Groove	AG	Roughing	Standard torsion (30-40°)	-	Cobalt HSS	45 ～ 95	-

  From: 1,346,830 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  AG Mill, Roughing, Medium AGREM

  NACHI(FUJIKOSHI)

  Capable of high-efficiency roughing of materials from steel to stainless steel and aluminum. The notches have a fine pitch.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  6 ～ 50	16 ～ 112	6 ～ 42	4 ～ 6	80 ～ 220	Stainless Steel[◎]	Side / Groove	AG	Roughing	Standard torsion (30-40°)	-	Cobalt HSS	53 ～ 112	-

  From: 1,538,466 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  AG Mill, Roughing, Regular Length Short AGRERS

  NACHI(FUJIKOSHI)

  Capable of high-speed and high-efficiency roughing of materials from steel to stainless steel and aluminum. The notches have a fine pitch.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  7 ～ 50	20 ～ 70	10 ～ 42	4 ～ 6	65 ～ 160	Stainless Steel[◎]	Side / Groove	TiAlN	Roughing	Standard torsion (30-40°)	-	Cobalt HSS	-	-

  From: 1,460,885 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  G 2-Flute End Mill for Key Groove GKKEY

  NACHI(FUJIKOSHI)

  End mill for key groove machining.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  8	12	10	2	60	Stainless Steel[○]	Plane / Side / Groove / Inclined Cuts	TiN	Square	Weak torsion (15 to 25˚)	-	Cobalt HSS	-	-

  From: 612,166 VND
  Days to Ship: Số ngày giao hàng: 10 Day(s)

  10 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  G Medium End Mill, 2-Flute 2MGE

  NACHI(FUJIKOSHI)

  General purpose coated end mill.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  6 ～ 8	15 ～ 20	8 ～ 10	2	60 ～ 65	Stainless Steel[○]	Plane / Side / Groove / Inclined Cuts	TiN	Square	Standard torsion (30-40°)	-	Cobalt HSS	-	-

  From: 454,500 VND
  Days to Ship: Số ngày giao hàng: 10 Day(s)

  10 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  SG-FAX Medium End Mill, 2-Flute 2MSGE

  NACHI(FUJIKOSHI)

  [Features]A medium end mill with 2 flutes.It is capable of high speed, highly efficient end milling of general steel, stainless steel, and aluminum.[Applications]Suitable for end milling general steel, stainless steel, aluminum, etc.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  2 ～ 30	7 ～ 60	6 ～ 25	2	50 ～ 135	Stainless Steel[◎]	Plane / Side / Groove / Inclined Cuts	TiCN	Square	Standard torsion (30-40°)	-	Alloy HSS	-	-

  From: 823,074 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SG-FAX Roughing End Mill, Large Pitch, Medium SGLREM

  NACHI(FUJIKOSHI)

  Capable of high-efficiency roughing of materials from steel to stainless steel and aluminum. The notches have a large pitch.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  6 ～ 50	16 ～ 122	6 ～ 42	3 ～ 6	80 ～ 220	Stainless Steel[◎]	Side	TiCN	Roughing	Standard torsion (30-40°)	-	Alloy HSS	-	-

  From: 1,688,247 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SG-FAX Roughing End Mill, Regular Length, Short SGFRERS

  NACHI(FUJIKOSHI)

  Capable of high-efficiency roughing of materials from steel to stainless steel and aluminum. The notches have a fine pitch.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  6 ～ 50	15 ～ 70	6 ～ 42	3 ～ 6	60 ～ 160	Stainless Steel[◎]	Side / Groove	TiCN	Roughing	Standard torsion (30-40°)	-	Alloy HSS	-	-

  From: 1,553,101 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  AG Mill, 2-Flute Mill, Medium 2AGEM

  NACHI(FUJIKOSHI)

  Capable of high-speed and high-efficiency machining of materials from steel to stainless steel and aluminum.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  1.5 ～ 20	3 ～ 45	6 ～ 20	2	50 ～ 110	Stainless Steel[◎]	Plane / Side / Groove / Inclined Cuts	TiAlN	Square	Standard torsion (30-40°)	-	Cobalt HSS	-	-

  From: 576,388 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  G 2-Flute End Mill for Key Groove GHKEY

  NACHI(FUJIKOSHI)

  End mill for key groove machining.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  3 ～ 20	6 ～ 20	6 ～ 20	2	50 ～ 85	Stainless Steel[○]	Plane / Side / Groove / Inclined Cuts	TiN	Square	Weak torsion (15 to 25˚)	-	Cobalt HSS	-	-

  From: 648,073 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SG-FAX Roughing End Mill Long SGFREL

  NACHI(FUJIKOSHI)

  Capable of roughing of materials from steel to stainless steel and aluminum. The notches have a fine pitch.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  6 ～ 50	26 ～ 150	6 ～ 42	3 ～ 6	80 ～ 250	Stainless Steel[○]	Side / Groove	TiCN	Roughing	Standard torsion (30-40°)	-	Alloy HSS	-	-

  From: 1,903,065 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  2-flute, Extra-long Type EXDL

  OSG

  General-purpose 2-flute end mill super long type using cobalt high-speed steel as the base material. Suitable for deep cuts.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  3 ～ 40	30 ～ 150	6 ～ 32	2	70 ～ 235	Stainless Steel[○]	Plane / Side / Groove / Inclined Cuts	Non-Coated	Square	Standard torsion (30-40°)	-	Cobalt HSS	-	Straight

  From: 986,667 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  For 2-Flute Keyway EX-TIN-EKD (OH1)

  OSG

  TiN coated 2-flute keyway end mill with a cutting diameter tolerance of 0 to +0.02.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  3 ～ 25	5 ～ 25	6 ～ 25	2	50 ～ 95	Stainless Steel[○]	Plane / Side / Groove / Inclined Cuts	TiN	Square	Weak torsion (15 to 25˚)	-	Cobalt HSS	-	Straight

  From: 776,667 VND
  Days to Ship: Số ngày giao hàng: 17 Day(s)

  17 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  2-flute Short Type EX-TIN-EDS

  OSG

  TiN coated general-purpose 2-flute short type end mill.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  0.8 ～ 50	1.6 ～ 75	6 ～ 42	2	45 ～ 165	Stainless Steel[○]	Plane / Side / Groove / Inclined Cuts	TiN	Square	Standard torsion (30-40°)	-	Cobalt HSS	-	Straight

  From: 776,667 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

BrandNhãn hiệu
Product SeriesDòng sản phẩm
From
Days to ShipSố ngày giao hàng
SpecificationsĐặc điểm kĩ thuật
Blade diameter (D)(φ)
Blade length (ℓ)(mm)
Shank diameter (d)(mm)
Number of flutes(sheet)
Overall Length (L)(mm)
work material
Machining Application
Coating
Blade shape type
Torsion Angle (θ)
Base Blade Y/N
Tool Material Type
Underneck length (ℓ1)(mm)
shank

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
BrandNhãn hiệu	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	OSG	OSG	OSG
Product SeriesDòng sản phẩm	AS Coated Powdered High-Speed Steel Roughing End Mill, 45° Spiral, Long, Center Cut	AS Coated Powdered High-Speed Steel Roughing End Mill, 45° Spiral, Short, Long Shank, Center Cut	AS Coated Powdered High-Speed Steel Roughing End Mill, Short, Center Cut	AS Coated Powdered High-Speed Steel Roughing End Mill, Regular, Center Cut	AS Coated Powdered High-Speed Steel Roughing End Mill, Long, Center Cut	AS Coated Powdered High-Speed Steel Roughing End Mill, Short, Long Shank, Center Cut	TiCN Coated Powdered High-Speed Steel Roughing End Mill, Long, Center Cut	TiCN Coated Powdered High-Speed Steel Roughing End Mill, Short, Long Shank, Center Cut	AS Coated Powdered High-Speed Steel Square End Mill, 3-Flute, 50° Spiral, Short	AS Coated Powdered High-Speed Steel Square End Mill, 4-Flute, 50° Spiral, Short	AS Coated Powdered High-Speed Steel Square End Mill, 3-Flute, 50° Spiral, Short, with Nicked Peripheral Cutting Edge	AS Coated Powdered High-Speed Steel Square End Mill, 4-Flute, 50° Spiral, Short, with Nicked Peripheral Cutting Edge	AS Coated Powdered High-Speed Steel Square End Mill, 2-Flute, Short	AS Coated Powdered High-Speed Steel Square End Mill, 2-Flute, Long	AS Coated Powdered High-Speed Steel Square End Mill, 4-Flute, Regular	AS Coated Powdered High-Speed Steel Square End Mill, 4-Flute, Long	TiCN Coated Powdered High-Speed Steel Square End Mill, 2-Flute, Short	TiCN Coated Powdered High-Speed Steel Square End Mill, 2-Flute, Regular	TiCN Coated Powdered High-Speed Steel Square End Mill, 2-Flute, Long	TiCN Coated Powdered High-Speed Steel Square End Mill, 4-Flute / Regular	AG Mill, Heavy AGHV	G Standard End Mill, 4-Flute 4GE	G Long End Mill, 2-Flute SL2GE	SG-FAX End Mill, Long, 2-Flute SL2SGE	SG-FAX End Mill, 2-Flute 2SGE	SG-FAX Heavy SGHV	SG-FAX Roughing End Mill, Long Shank, SLX Type SGFREU	SG-FAX End Mill, 4-Flute 4SGE	SG-FAX Heavy Long SGLHV	SG-FAX Roughing End Mill, Long Shank, SX Type SGFREX	AG Mill, Heavy, Long AGLHV	AG Mill, Roughing, Short AGRES	AG Mill, Roughing, Medium AGREM	AG Mill, Roughing, Regular Length Short AGRERS	G 2-Flute End Mill for Key Groove GKKEY	G Medium End Mill, 2-Flute 2MGE	SG-FAX Medium End Mill, 2-Flute 2MSGE	SG-FAX Roughing End Mill, Large Pitch, Medium SGLREM	SG-FAX Roughing End Mill, Regular Length, Short SGFRERS	AG Mill, 2-Flute Mill, Medium 2AGEM	G 2-Flute End Mill for Key Groove GHKEY	SG-FAX Roughing End Mill Long SGFREL	2-flute, Extra-long Type EXDL	For 2-Flute Keyway EX-TIN-EKD (OH1)	2-flute Short Type EX-TIN-EDS
From	1,613,757 VND	1,341,218 VND	1,028,851 VND	1,202,550 VND	1,578,099 VND	1,250,302 VND	1,228,408 VND	1,042,167 VND	814,907 VND	838,470 VND	1,048,452 VND	1,017,590 VND	635,898 VND	731,080 VND	708,977 VND	773,828 VND	446,012 VND	446,012 VND	436,855 VND	454,579 VND	815,796 VND	659,797 VND	690,485 VND	1,086,681 VND	838,812 VND	1,138,022 VND	3,698,328 VND	1,489,000 VND	1,717,165 VND	3,501,411 VND	1,004,450 VND	1,346,830 VND	1,538,466 VND	1,460,885 VND	612,166 VND	454,500 VND	823,074 VND	1,688,247 VND	1,553,101 VND	576,388 VND	648,073 VND	1,903,065 VND	986,667 VND	776,667 VND	776,667 VND
Days to ShipSố ngày giao hàng	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	Same day or more	4 Day(s) or more	6 Day(s) or more	Same day or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	Same day or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	10 Day(s)	10 Day(s)	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	8 Day(s) or more	17 Day(s)	7 Day(s) or more
SpecificationsĐặc điểm kĩ thuật	AS 4 Flutes L (Long)	AS 3 Flutes S (Short)	AS 4 Flutes S (Short)	AS 4 Flutes R (Regular)	AS 4 Flutes L (Long)	AS 3 Flutes S (Short)	TiCN 4 Flutes L (Long)	TiCN 3 Flutes S (Short)	AS 3 Flutes S (Short)	AS 4 Flutes S (Short)	AS 3 Flutes S (Short)	AS 4 Flutes S (Short)	AS 2 Flutes S (Short)	AS 2 Flutes L (Long)	AS 4 Flutes R (Regular)	AS 4 Flutes L (Long)	TiCN 2 Flutes S (Short)	TiCN 2 Flutes R (Regular)	TiCN 2 Flutes L (Long)	TiCN 4 Flutes L (Long)
Blade diameter (D)(φ)	10 ～ 30	6 ～ 30	5 ～ 32	6 ～ 30	10 ～ 30	6 ～ 30	10 ～ 30	6 ～ 30	6 ～ 25	6 ～ 25	6 ～ 20	6 ～ 20	1 ～ 40	3 ～ 20	3 ～ 25	3 ～ 25	1 ～ 40	1 ～ 25	3 ～ 25	3 ～ 25	3 ～ 50	2.5 ～ 50	3 ～ 40	3 ～ 30	1 ～ 50	3 ～ 50	16 ～ 50	12 ～ 28	3 ～ 50	16 ～ 50	3 ～ 50	6 ～ 50	6 ～ 50	7 ～ 50	8	6 ～ 8	2 ～ 30	6 ～ 50	6 ～ 50	1.5 ～ 20	3 ～ 20	6 ～ 50	3 ～ 40	3 ～ 25	0.8 ～ 50
Blade length (ℓ)(mm)	45 ～ 90	11 ～ 45	13 ～ 53	19 ～ 68	45 ～ 90	11 ～ 45	45 ～ 90	11 ～ 45	15 ～ 50	15 ～ 50	15 ～ 45	15 ～ 45	2.5 ～ 65	15 ～ 75	12 ～ 68	15 ～ 90	2.5 ～ 65	3.5 ～ 60	15 ～ 90	15 ～ 90	9 ～ 70	7 ～ 70	15 ～ 125	15 ～ 90	2 ～ 70	9 ～ 70	32 ～ 75	30 ～ 55	15 ～ 145	32 ～ 75	15 ～ 145	11 ～ 75	16 ～ 112	20 ～ 70	12	15 ～ 20	7 ～ 60	16 ～ 122	15 ～ 70	3 ～ 45	6 ～ 20	26 ～ 150	30 ～ 150	5 ～ 25	1.6 ～ 75
Shank diameter (d)(mm)	10 ～ 25	6 ～ 25	6 ～ 32	6 ～ 25	10 ～ 25	6 ～ 25	10 ～ 25	6 ～ 25	8 ～ 25	8 ～ 25	8 ～ 20	8 ～ 20	6 ～ 32	6 ～ 20	6 ～ 25	6 ～ 25	6 ～ 32	6 ～ 25	6 ～ 25	6 ～ 25	6 ～ 42	6 ～ 42	6 ～ 32	6 ～ 25	6 ～ 42	6 ～ 42	16 ～ 42	12 ～ 25	6 ～ 42	16 ～ 42	6 ～ 42	6 ～ 42	6 ～ 42	10 ～ 42	10	8 ～ 10	6 ～ 25	6 ～ 42	6 ～ 42	6 ～ 20	6 ～ 20	6 ～ 42	6 ～ 32	6 ～ 25	6 ～ 42
Number of flutes(sheet)	4 ～ 5	3 ～ 4	3 ～ 6	3 ～ 5	4 ～ 5	3 ～ 4	4 ～ 5	3 ～ 4	3	4	3	4	2	2	4	4	2	2	2	4	4 ～ 6	4	2	2	2	4 ～ 6	4 ～ 6	4	4 ～ 6	4 ～ 6	4 ～ 6	4 ～ 6	4 ～ 6	4 ～ 6	2	2	2	3 ～ 6	3 ～ 6	2	2	3 ～ 6	2	2	2
Overall Length (L)(mm)	95 ～ 166	80 ～ 160	57 ～ 133	63 ～ 144	95 ～ 166	80 ～ 160	95 ～ 166	80 ～ 160	65 ～ 140	65 ～ 140	65 ～ 125	65 ～ 125	45 ～ 150	60 ～ 140	55 ～ 144	60 ～ 160	45 ～ 150	45 ～ 130	60 ～ 160	60 ～ 160	50 ～ 160	50 ～ 160	60 ～ 210	65 ～ 180	50 ～ 160	50 ～ 160	200 ～ 350	80 ～ 135	60 ～ 230	170 ～ 280	60 ～ 230	80 ～ 220	80 ～ 220	65 ～ 160	60	60 ～ 65	50 ～ 135	80 ～ 220	60 ～ 160	50 ～ 110	50 ～ 85	80 ～ 250	70 ～ 235	50 ～ 95	45 ～ 165
work material	Stainless Steel[◎]	Stainless Steel[◎]	Stainless Steel[◎]	Stainless Steel[◎]	Stainless Steel[◎]	Stainless Steel[◎]	Stainless Steel[○]	Stainless Steel[○]	Stainless Steel[◎]	Stainless Steel[◎]	Stainless Steel[◎]	Stainless Steel[◎]	Stainless Steel[○]	Stainless Steel[○]	Stainless Steel[○]	Stainless Steel[○]	Stainless Steel[○]	Stainless Steel[○]	Stainless Steel[○]	Stainless Steel[○]	Stainless Steel[◎]	Stainless Steel[○]	Stainless Steel[○]	Stainless Steel[◎]	Stainless Steel[◎]	Stainless Steel[◎]	Stainless Steel[◎]	Stainless Steel[◎]	Stainless Steel[○]	Stainless Steel[◎]	Stainless Steel[○]	Stainless Steel[◎]	Stainless Steel[◎]	Stainless Steel[◎]	Stainless Steel[○]	Stainless Steel[○]	Stainless Steel[◎]	Stainless Steel[◎]	Stainless Steel[◎]	Stainless Steel[◎]	Stainless Steel[○]	Stainless Steel[○]	Stainless Steel[○]	Stainless Steel[○]	Stainless Steel[○]
Machining Application	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts / Countersinking	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Inclined Cuts / Countersinking	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Countersinking	Side / Groove	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Side / Groove	Side / Groove	Plane / Side / Groove / Inclined Cuts	Side / Groove	Side / Groove	Side / Groove	Side / Groove	Side / Groove	Side / Groove	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Side	Side / Groove	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Side / Groove	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts
Coating	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	TiCN	TiCN	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	TiCN	TiCN	TiCN	TiCN	AG	TiN	TiN	TiCN	TiCN	TiCN	TiCN	Non-Coated	TiCN	TiCN	TiAlN	AG	AG	TiAlN	TiN	TiN	TiCN	TiCN	TiCN	TiAlN	TiN	TiCN	Non-Coated	TiN	TiN
Blade shape type	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Roughing	Square	Square	Square	Square	Roughing	Roughing	Square	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Square	Square	Square	Roughing	Roughing	Square	Square	Roughing	Square	Square	Square
Torsion Angle (θ)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Weak torsion (15 to 25˚)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Weak torsion (15 to 25˚)	Standard torsion (30-40°)	Standard torsion (30-40°)	Weak torsion (15 to 25˚)	Standard torsion (30-40°)
Base Blade Y/N	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Tool Material Type	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Cobalt HSS	Cobalt HSS	Cobalt HSS	Alloy HSS	Alloy HSS	Alloy HSS	Alloy HSS	Alloy HSS	Alloy HSS	Alloy HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Alloy HSS	Alloy HSS	Alloy HSS	Cobalt HSS	Cobalt HSS	Alloy HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS
Underneck length (ℓ1)(mm)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	72 ～ 113	-	-	64 ～ 100	-	45 ～ 95	53 ～ 112	-	-	-	-	-	-	-	-	-	-	-	-
shank	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	Straight	Straight	Straight

Loading...Tải…