Carbide Taper End Mills

• You can add up to 6 items per a category to the compare list. Compare

  

  MTB230 MUGEN-COATING Tapered Ball End Mill

  NS TOOL

  [Features]・ Taper machining and ball machining are possible at the same time.・ The size ranges from a minimum of R0.1 to a maximum of one angle of 15°.

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  1 ～ 15	-	Taper ball	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Copper[◎] / Resin[◎]	1 ～ 16	0.1 ～ 2	2	4 ～ 10	50 ～ 70	TiAlN

  From: 2,293,946 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MRBTNH230 MUGEN COATING Premium 2-Flute Long Tapered Neck Ball End Mill

  NS TOOL

  [Features]・ A newly designed tapered neck shape that enhances tool rigidity and an infinite coating premium that is ideal for direct engraving of high hardness materials are adopted. With these synergistic effects, deep cutting of highly accuracy and highly efficient hard materials is realized.・ Tapered neck shape ball end mill that can achieve high accuracy by machining deep parts.・ By adopting the ideal taper neck shape and MUGEN coat...Readmore

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  0.5 ～ 2	-	Taper ball	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○] / Aluminum[○] / Titanium[◎] / Copper[○] / Resin[○]	0.15 ～ 3	0.1 ～ 2	2	4 ～ 6	50 ～ 110	TiAlN

  From: 997,254 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  C-CTE 4000, UT Coat, 4-Flute Tapered

  UNION TOOL

  [Features]· Taper end mill with extensive variations from taper half angle of 30' to 7°

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  0.5 ～ 7	3 ～ 10	Tapered square	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Cast Iron[○] / Copper[○]	10 ～ 35	-	4	6 ～ 16	50 ～ 90	TiCN

  From: 1,594,608 VND
  Days to Ship: Số ngày giao hàng: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MTE230 MUGEN-COATING Tapered End Mill

  NS TOOL

  [Features]・ MUGEN coating allows long taper machining lifespan.・ Available in series with sizes of ø0.2 to ø10 and one angle of 30' to 20° (ø6 or less).

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  0.5 ～ 20	0.2 ～ 10	Tapered square	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎]	0.8 ～ 35	-	2	4 ～ 20	45 ～ 100	TiAlN

  From: 1,463,003 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide Reverse Cutter (Carbide Solid Reverse Taper End Mill)

  EIKOSHA

  Reverse tapering, uniform torsion (high-efficiency and high-accuracy)

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  0.5 ～ 5	2 ～ 12	Tapered radius	general steel[○] / Quenched and tempered steel[○]	3 ～ 25	0.3 ～ 0.5	2	3 ～ 12	40 ～ 70	Non-Coated

  From: 2,010,474 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  4-flute, Tapered Blade, Short Type MG-TPMS

  OSG

  A high-toughness carbide is used to achieve long lifespan in the medium and low speed range.

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  0.5 ～ 3	2 ～ 12	Tapered square	general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	8 ～ 30	-	4	4 ～ 12	45 ～ 90	Non-Coated

  From: 2,234,144 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide End Mill (Trapezoidal Runner) MG-TRC

  OSG

  A taper flute end mill that can be used for trapezoidal runner machining. Uses high-toughness carbide.

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  7 ～ 15	2 ～ 6	Tapered square	general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	4 ～ 12	-	2	4 ～ 12	45 ～ 75	Non-Coated

  From: 2,596,895 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  NTER-2X X-Coating Taper Radius End Mill

  NS TOOL

  Tapered radius end mill suitable for 56 HRC or less.Tool material, Ultrafine grain cemented carbideHelix angle, 30°Surface treatment, X coatingNo. of Flutes: 2Machining applications: Flat surface machining, side machining, groovingcorner shape: radius

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  0.5 ～ 10	1 ～ 6	Tapered radius	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Aluminum[○] / Copper[○]	4 ～ 20	0.2 ～ 2	2	4 ～ 12	45 ～ 80	TiCN

  From: 2,916,144 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide tapered end mill, 2-flute / regular model

  MISUMI

  [Features]·Since the cutting edge has been processed into a sharp corner, it is also possible to machining corner edges·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  • TS
  • General Steel
  • 2 Flutes
  • R (Regular)

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  0.5 ～ 30	0.5 ～ 6	Tapered square	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	2 ～ 24	-	2	4 ～ 12	50 ～ 70	For High Hardness (Silicon Group)

  From: 1,236,469 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide end mill for runner grooves, for trapezoid runner grooves / 2-flute

  MISUMI

  [Features]·Essential item for plastic runner fluting·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties

  • Volume Discount

  • TS
  • General Steel
  • 2 Flutes

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  5 ～ 15	1.5 ～ 4	Tapered radius	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	3 ～ 6.5	0 ～ 1	2	4 ～ 8	40 ～ 50	For High Hardness (Silicon Group)

  From: 1,742,208 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  C-CTE 2000, UT Coat, 2-Flute Tapered

  UNION TOOL

  [Features]· 2-flute taper end mill with extensive variations from taper half angle of 30' to 15°

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  0.5 ～ 15	0.2 ～ 2.5	Tapered square	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Cast Iron[○] / Copper[○]	0.8 ～ 8	-	2	3 ～ 8	38 ～ 50	TiCN

  From: 1,338,086 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MRT425 MUGEN-COATING Tapered End Mill for Deep Ribbing

  NS TOOL

  NS's original high stiffness design enables high-precision and high-efficiency machining.[Work Material]○: Heat-treated steel, hardening steel (Up to 55 HRC), stainless steel, titanium alloy, aluminum alloy, resin◎: Carbon steel, steel alloy/tool steel, copper

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  0.25 ～ 3	0.2 ～ 3	Tapered square	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎]	2 ～ 40	-	4	3 ～ 6	40 ～ 80	TiAlN

  From: 1,444,905 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Taper End Mill for Copper Electrode / Aluminum / Plastic DTE

  NS TOOL

  Special blade shape and carbide maintain high sharpness for a long period of time. Produces a higher grade finished surface accuracy

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  0.5 ～ 5	1 ～ 10	Tapered square	Aluminum[◎] / Copper[◎] / Resin[◎]	4 ～ 35	-	2	4 ～ 16	45 ～ 90	Non-Coated

  From: 1,817,253 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide Solid Taper End Mill (Medium)

  EIKOSHA

  Taper square end mill with strong hardness (carbide).[Features]·Tapered edge shape for machining inclined parts with equal helix.[Applications]·Ideal for taper milling.

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  1ﾟ ～ 30'	0.5 ～ 10	Tapered square	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Graphite[○]	4 ～ 40	-	2	3 ～ 25	40 ～ 110	Non-Coated

  From: 1,537,953 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Taper end mill 2 flutes

  ATOM

  A small diameter taper end mill that standardizes maximum taper angles up to 15 degrees.

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  1° ～ 30′	0.1 ～ 3	Tapered square	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[◎] / Resin[◎]	0.5 ～ 12	-	2	3 ～ 10	35 ～ 50	-

  From: 1,616,248 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide tapered end mill, 4-flute / for deep ribbing

  MISUMI

  [Features]·Since the cutting edge has been processed into a sharp corner, it is also possible to machining corner edges·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties

  • Volume Discount

  • TS
  • General Steel
  • 4 Flutes

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  0.5 ～ 2	0.4 ～ 2	Tapered square	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	2 ～ 12	-	4	3 ～ 4	40 ～ 50	For High Hardness (Silicon Group)

  From: 1,722,224 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide tapered ball end mill, 4-flute / long model

  MISUMI

  [Features]·Blade length can be selected according to depth of rib groove (Choose shortest blade length possible to maintain rigid)·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  • TS
  • General Steel
  • 4 Flutes
  • L (Long)

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  0.5 ～ 2	-	Taper ball	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	4 ～ 30	0.3 ～ 1.25	4	4 ～ 6	45 ～ 70	For High Hardness (Silicon Group)

  From: 1,717,808 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide end mill for runner grooves, for tapered ball runner grooves / 2-flute

  MISUMI

  [Features]·Essential item for plastic runner fluting·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties

  • Volume Discount

  • TS
  • General Steel
  • 2 Flutes

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  5 ～ 15	-	Taper ball	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	3 ～ 7	1 ～ 3	2	4 ～ 10	40 ～ 75	For High Hardness (Silicon Group)

  From: 2,005,363 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  TSC series carbide tapered ball end mill (for engraving), 1-flute / crescent model

  MISUMI

  [Features]·R of tip is also effective in suppressing chipping·Half-moon shape with good discharge of cutting chip even with small diameter·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. As coating characteristic, it is effective in high-speed machining and dry machining

  • Volume Discount

  • TS
  • General Steel
  • 2 Flutes
  • S (Short)

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  -	-	Taper ball	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	-	0.1 ～ 0.3	1	4	45	For High Hardness (Silicon Group)

  From: 1,308,480 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide tapered end mill, 4-flute / regular

  MISUMI

  [Features]·Adoption of 4-flute shape makes it ideal for machining sloped side surfaces·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  • TS
  • General Steel
  • 4 Flutes
  • R (Regular)

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  0.5 ～ 5	3 ～ 10	Tapered square	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	12 ～ 35	-	4	4 ～ 16	60 ～ 90	For High Hardness (Silicon Group)

  From: 1,721,981 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  2-flute, Tapered Blade, Short Type FX-MG-TPDS

  OSG

  FX coating enables high efficiency and long service life. Can be used with a wide range of materials, from general materials to hardened steel.

  • Volume Discount

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  0.5 ～ 20	0.5 ～ 12	Tapered square	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	2 ～ 40	-	2	3 ～ 20	40 ～ 120	TiAlN

  From: 2,094,276 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  2-flute, Tapered Blade, Short Type MG-TPDS

  OSG

  A high-toughness carbide is used to achieve long lifespan in the medium and low speed range.

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  0.5 ～ 7	1 ～ 12	Tapered square	general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	5 ～ 40	-	2	4 ～ 20	45 ～ 110	Non-Coated

  From: 2,017,359 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  For Rib Grooves, Taper End Type FXS-RB-TPE

  OSG

  A high-stiffness taper end mill that enables highly efficient machining of rib. It can also be used for side machining other than grooves.

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  0.5 ～ 3	0.4 ～ 3	Tapered square	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Titanium[○] / Copper[○]	2 ～ 40	-	multi-edged	3 ～ 8	35 ～ 80	TiAlN

  From: 2,708,041 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  For Rib Grooves, Taper Ball End Type FXS-RB-TPB

  OSG

  A high-rigidity taper end mill which enables rib grooves to be machined with high efficiency. Can also be used for automobile curved surfaces.

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  0.5 ～ 2	-	Taper ball	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Titanium[○] / Copper[○]	4 ～ 30	0.3 ～ 1.25	multi-edged	3 ～ 6	35 ～ 60	TiAlN

  From: 3,682,590 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  For Rib Grooves, taper type with corner rounding FXS-RB-TPCR

  OSG

  A radius end type high-rigidity taper end mill which enables rib grooves to be machined with high efficiency.

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  0.5 ～ 1.5	1 ～ 2	Tapered radius	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Titanium[○] / Copper[○]	8 ～ 12	0.2 ～ 0.5	multi-edged	4	45	TiAlN

  From: 3,275,577 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide Tapered End Mill NTE-2

  NS TOOL

  [Work Material]○: Carbon steel, steel alloy/tool steel, heat-treated steel, stainless steel, copper◎: aluminum alloy, resin

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  0.5 ～ 20	0.5 ～ 3	Tapered square	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Aluminum[◎] / Copper[◎] / Resin[◎]	2 ～ 10	-	2	3 ～ 10	35 ～ 70	Non-Coated

  From: 1,875,783 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Taper Ball End Mill

  NS TOOL

  [Work Material]○: Carbon steel, steel alloy/tool steel, heat-treated steel, stainless steel◎; copper, aluminum alloy, resin

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  0.5 ～ 10	-	Taper ball	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Aluminum[◎] / Copper[◎] / Resin[◎]	10 ～ 35	0.5 ～ 3	2	4 ～ 16	50 ～ 100	Non-Coated

  From: 2,845,548 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Tapered Long Blade End Mill NTEL-2

  NS TOOL

  [Work Material]○: Carbon steel, steel alloy/tool steel, heat-treated steel, stainless steel, resin◎; copper, aluminum alloy

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  0.5 ～ 20	1 ～ 3	Tapered square	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Aluminum[◎] / Copper[◎] / Resin[◎]	10 ～ 20	-	2	4 ～ 16	45 ～ 100	Non-Coated

  From: 2,441,550 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  NER-2 Trapezoidal Runner End Mill

  NS TOOL

  [Work Material]○: Carbon steel, steel alloy/tool steel, heat-treated steel, stainless steel, resin◎; copper, aluminum alloy

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  7 ～ 15	2 ～ 6	Tapered square	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[◎] / Copper[◎] / Resin[◎]	5 ～ 12	-	2	4 ～ 12	45 ～ 75	Non-Coated

  From: 2,470,994 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide Tapered End Mill NTE-4

  NS TOOL

  [Work Material]○: Carbon steel, steel alloy/tool steel, heat-treated steel, stainless steel, resin◎: Aluminum alloy, copper

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  0.5 ～ 15	3 ～ 10	Tapered square	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Aluminum[◎] / Copper[◎] / Resin[○]	10 ～ 35	-	4	6 ～ 16	50 ～ 90	Non-Coated

  From: 2,117,096 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  X Coated Taper End Mill NTE-2X

  NS TOOL

  [Work Material]○: Stainless steel, aluminum alloy, copper, resin◎: Carbon steel, steel alloy/tool steel, heat-treated steel

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  0.5 ～ 5	0.5 ～ 2.5	Tapered square	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Aluminum[○] / Copper[○]	2 ～ 4	-	2	3 ～ 4	35 ～ 45	TiCN

  From: 2,304,985 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  X Coated Taper End Mill NTE-4X

  NS TOOL

  [Work Material]○: Stainless steel, aluminum alloy, copper, resin◎: Carbon steel, steel alloy/tool steel, heat-treated steel

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  0.5 ～ 5	3 ～ 10	Tapered square	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Aluminum[○] / Copper[○]	10 ～ 35	-	4	6 ～ 16	50 ～ 90	TiCN

  From: 2,533,354 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Tapered Long Blade End Mill NTEL-4

  NS TOOL

  [Work Material]○: Carbon steel, steel alloy/tool steel, heat-treated steel, stainless steel, resin◎: Aluminum alloy, copper

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  0.5 ～ 5	3 ～ 6	Tapered square	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Aluminum[◎] / Copper[◎] / Resin[○]	20 ～ 35	-	4	6 ～ 12	60 ～ 90	Non-Coated

  From: 2,753,698 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Tapered Medium Blade End Mill NTEM-2

  NS TOOL

  [Work Material]○: Carbon steel, steel alloy/tool steel, heat-treated steel, stainless steel, resin◎: Aluminum alloy, copper

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  0.5 ～ 20	1 ～ 4	Tapered square	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Aluminum[◎] / Copper[◎] / Resin[◎]	5 ～ 20	-	2	4 ～ 16	50 ～ 90	Non-Coated

  From: 2,221,160 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  X Coated Taper Medium Blade End Mill NTEM-2X

  NS TOOL

  Medium type taper end mill.Tool material, Ultrafine grain cemented carbideHelix angle, 30°Surface treatment, X coatingNo. of Flutes: 2Machining applications: Grooving, side milling

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  0.5 ～ 15	0.5 ～ 6	Tapered square	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Aluminum[○] / Copper[○]	4 ～ 30	-	2	3 ～ 16	35 ～ 90	Non-Coated

  From: 2,845,548 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MUGEN-COATING PREMIUM 3-Flute Long Tapered Neck Ball End Mill MRBTNH345

  NS TOOL

  [Features]・ The lower neck is tapered to improve rigidity over the conventional long neck type.・ MUGEN Coating Premium, which has excellent heat resistance, is adopted, and it has a long lifespan even when machining hard materials.・ High efficiency machining is possible by adopting original 3 flute shape.

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  0.5 ～ 2	-	Taper ball	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○] / Aluminum[○] / Titanium[◎] / Copper[○] / Resin[○]	0.75 ～ 4.5	0.5 ～ 2	3	6	60 ～ 110	For High Hardness (Silicon Group)

  From: 1,372,709 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MUGEN-COATING Extra Long Tapered Neck Ball End Mill MRBTN230L

  NS TOOL

  The lower neck is tapered to improve tool rigidity. The depth of cut can be increased compared to conventional products.

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  0.5 ～ 5	-	Taper ball	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎]	0.2 ～ 10	0.1 ～ 5	2	4 ～ 12	50 ～ 140	TiAlN

  From: 2,325,225 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Taper Long End Mill for Copper Electrode / Aluminum / Plastic DTEL

  NS TOOL

  Adopts a dedicated flute shape and dedicated carbide to maintain sharp cutting edge. A higher-grade finishing surface precision can be obtained.

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  0.5 ～ 5	1 ～ 8	Tapered square	Aluminum[◎] / Copper[◎] / Resin[◎]	8 ～ 64	-	2	4 ～ 20	50 ～ 130	Non-Coated

  From: 2,617,133 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide Air Wheel Solid Taper End Mill

  EIKOSHA

  Graphite Electrode Milling, with Air Wheel

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  0.5 ～ 7	4 ～ 12	Tapered square	general steel[○] / Aluminum[◎] / Copper[◎] / Graphite[◎]	25 ～ 50	-	2	6 ～ 20	90 ～ 120	Non-Coated

  From: 3,262,790 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide Solid Taper Ball End Mill

  EIKOSHA

  A tapered ball end mill that uses cemented carbide, making it ideal for profiling the curved surface of molds.[Features]·Compared to high-speed steel, carbide is used, so heat resistance and wear resistance are greatly improved compared to powdered high-speed steel.·Ideal for mold curved surface machining and profiling. Simultaneous processing of draft angle is possible.[Applications]·Used for mold processing, etc.

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  1ﾟ ～ 30'	-	Taper ball	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Graphite[○]	4 ～ 40	0.5 ～ 8	2	4 ～ 25	45 ～ 90	Non-Coated

  From: 1,875,917 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide Solid Long Taper Ball End Mill

  EIKOSHA

  Taper ball end mill long type using carbide.[Features]·Compared to high-speed steel, carbide is used, so heat resistance and wear resistance are greatly improved compared to powdered high-speed steel.·Ideal for mold curved surface machining and profiling. Simultaneous processing of draft angle is possible.[Applications]·Ideal for curved surface processing of molds, etc.

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  1ﾟ ～ 30'	-	Taper ball	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Copper[◎] / Graphite[○]	6 ～ 50	0.5 ～ 5	2	4 ～ 25	55 ～ 150	Non-Coated

  From: 2,230,603 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Taper ball end mill 2 blades

  ATOM

  A small diameter taper ball end mill that standardizes maximum taper angles up to 15 degrees.

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  1° ～ 30′	0.1 ～ 3	Taper ball	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[◎] / Resin[◎]	0.5 ～ 12	0.05 ～ 1.5	2	3 ～ 10	35 ～ 55	-

  From: 2,340,766 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  One Cut Super Radius End Mill DV-OCSRTN

  DIJET

  Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  0°50' ～ 1°	2 ～ 16	Tapered radius	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Cast Iron[○]	3 ～ 24	0.5 ～ 3	3	6 ～ 20	70 ～ 220	-

  From: 3,715,106 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  One Cut Ball Long Type DZ-OCLB-T

  DIJET

  Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  0°57' ～ 2°52'	4 ～ 12	Taper ball	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / High Hardness Steel-HRC65[○] / Cast Iron[◎] / Aluminum[○] / Copper[○]	10 ～ 33	2 ～ 6	2	10 ～ 16	160 ～ 280	TiAlN

  From: 6,129,088 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide Air Hole Solid Taper Ball End Mill AHTBE

  EIKOSHA

  [Features]· For graphite electrode machining.· With air hole.· 2-flute type.

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  0.5ﾟ ～ 30'	-	Taper ball	general steel[○] / Aluminum[◎] / Copper[◎] / Graphite[◎]	25 ～ 50	2 ～ 6	2	6 ～ 20	90 ～ 120	Non-Coated

  From: 3,934,505 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

BrandNhãn hiệu
Product SeriesDòng sản phẩm
From
Days to ShipSố ngày giao hàng
SpecificationsĐặc điểm kĩ thuật
Single corner (θ)(Degree)
Tip diameter (D)(φ)
Type
work material
Blade length (l)(mm)
R Size(mm)
Number of flutes(sheet)
Shank diameter (d)(mm)
Overall Length (L)(mm)
Coating

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
BrandNhãn hiệu	NS TOOL	NS TOOL	UNION TOOL	NS TOOL	EIKOSHA	OSG	OSG	NS TOOL	MISUMI	MISUMI	UNION TOOL	NS TOOL	NS TOOL	EIKOSHA	ATOM	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	OSG	OSG	OSG	OSG	OSG	NS TOOL	NS TOOL	NS TOOL	NS TOOL	NS TOOL	NS TOOL	NS TOOL	NS TOOL	NS TOOL	NS TOOL	NS TOOL	NS TOOL	NS TOOL	EIKOSHA	EIKOSHA	EIKOSHA	ATOM	DIJET	DIJET	EIKOSHA
Product SeriesDòng sản phẩm	MTB230 MUGEN-COATING Tapered Ball End Mill	MRBTNH230 MUGEN COATING Premium 2-Flute Long Tapered Neck Ball End Mill	C-CTE 4000, UT Coat, 4-Flute Tapered	MTE230 MUGEN-COATING Tapered End Mill	Carbide Reverse Cutter (Carbide Solid Reverse Taper End Mill)	4-flute, Tapered Blade, Short Type MG-TPMS	Carbide End Mill (Trapezoidal Runner) MG-TRC	NTER-2X X-Coating Taper Radius End Mill	TSC series carbide tapered end mill, 2-flute / regular model	TSC series carbide end mill for runner grooves, for trapezoid runner grooves / 2-flute	C-CTE 2000, UT Coat, 2-Flute Tapered	MRT425 MUGEN-COATING Tapered End Mill for Deep Ribbing	Taper End Mill for Copper Electrode / Aluminum / Plastic DTE	Carbide Solid Taper End Mill (Medium)	Taper end mill 2 flutes	TSC series carbide tapered end mill, 4-flute / for deep ribbing	TSC series carbide tapered ball end mill, 4-flute / long model	TSC series carbide end mill for runner grooves, for tapered ball runner grooves / 2-flute	TSC series carbide tapered ball end mill (for engraving), 1-flute / crescent model	TSC series carbide tapered end mill, 4-flute / regular	2-flute, Tapered Blade, Short Type FX-MG-TPDS	2-flute, Tapered Blade, Short Type MG-TPDS	For Rib Grooves, Taper End Type FXS-RB-TPE	For Rib Grooves, Taper Ball End Type FXS-RB-TPB	For Rib Grooves, taper type with corner rounding FXS-RB-TPCR	Carbide Tapered End Mill NTE-2	Taper Ball End Mill	Tapered Long Blade End Mill NTEL-2	NER-2 Trapezoidal Runner End Mill	Carbide Tapered End Mill NTE-4	X Coated Taper End Mill NTE-2X	X Coated Taper End Mill NTE-4X	Tapered Long Blade End Mill NTEL-4	Tapered Medium Blade End Mill NTEM-2	X Coated Taper Medium Blade End Mill NTEM-2X	MUGEN-COATING PREMIUM 3-Flute Long Tapered Neck Ball End Mill MRBTNH345	MUGEN-COATING Extra Long Tapered Neck Ball End Mill MRBTN230L	Taper Long End Mill for Copper Electrode / Aluminum / Plastic DTEL	Carbide Air Wheel Solid Taper End Mill	Carbide Solid Taper Ball End Mill	Carbide Solid Long Taper Ball End Mill	Taper ball end mill 2 blades	One Cut Super Radius End Mill DV-OCSRTN	One Cut Ball Long Type DZ-OCLB-T	Carbide Air Hole Solid Taper Ball End Mill AHTBE
From	2,293,946 VND	997,254 VND	1,594,608 VND	1,463,003 VND	2,010,474 VND	2,234,144 VND	2,596,895 VND	2,916,144 VND	1,236,469 VND	1,742,208 VND	1,338,086 VND	1,444,905 VND	1,817,253 VND	1,537,953 VND	1,616,248 VND	1,722,224 VND	1,717,808 VND	2,005,363 VND	1,308,480 VND	1,721,981 VND	2,094,276 VND	2,017,359 VND	2,708,041 VND	3,682,590 VND	3,275,577 VND	1,875,783 VND	2,845,548 VND	2,441,550 VND	2,470,994 VND	2,117,096 VND	2,304,985 VND	2,533,354 VND	2,753,698 VND	2,221,160 VND	2,845,548 VND	1,372,709 VND	2,325,225 VND	2,617,133 VND	3,262,790 VND	1,875,917 VND	2,230,603 VND	2,340,766 VND	3,715,106 VND	6,129,088 VND	3,934,505 VND
Days to ShipSố ngày giao hàng	8 Day(s) or more	6 Day(s) or more	5 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	Same day or more	4 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	Same day or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	Same day or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	8 Day(s) or more	6 Day(s) or more	6 Day(s) or more
SpecificationsĐặc điểm kĩ thuật									TS General Steel 2 Flutes R (Regular)	TS General Steel 2 Flutes						TS General Steel 4 Flutes	TS General Steel 4 Flutes L (Long)	TS General Steel 2 Flutes	TS General Steel 2 Flutes S (Short)	TS General Steel 4 Flutes R (Regular)
Single corner (θ)(Degree)	1 ～ 15	0.5 ～ 2	0.5 ～ 7	0.5 ～ 20	0.5 ～ 5	0.5 ～ 3	7 ～ 15	0.5 ～ 10	0.5 ～ 30	5 ～ 15	0.5 ～ 15	0.25 ～ 3	0.5 ～ 5	1ﾟ ～ 30'	1° ～ 30′	0.5 ～ 2	0.5 ～ 2	5 ～ 15	-	0.5 ～ 5	0.5 ～ 20	0.5 ～ 7	0.5 ～ 3	0.5 ～ 2	0.5 ～ 1.5	0.5 ～ 20	0.5 ～ 10	0.5 ～ 20	7 ～ 15	0.5 ～ 15	0.5 ～ 5	0.5 ～ 5	0.5 ～ 5	0.5 ～ 20	0.5 ～ 15	0.5 ～ 2	0.5 ～ 5	0.5 ～ 5	0.5 ～ 7	1ﾟ ～ 30'	1ﾟ ～ 30'	1° ～ 30′	0°50' ～ 1°	0°57' ～ 2°52'	0.5ﾟ ～ 30'
Tip diameter (D)(φ)	-	-	3 ～ 10	0.2 ～ 10	2 ～ 12	2 ～ 12	2 ～ 6	1 ～ 6	0.5 ～ 6	1.5 ～ 4	0.2 ～ 2.5	0.2 ～ 3	1 ～ 10	0.5 ～ 10	0.1 ～ 3	0.4 ～ 2	-	-	-	3 ～ 10	0.5 ～ 12	1 ～ 12	0.4 ～ 3	-	1 ～ 2	0.5 ～ 3	-	1 ～ 3	2 ～ 6	3 ～ 10	0.5 ～ 2.5	3 ～ 10	3 ～ 6	1 ～ 4	0.5 ～ 6	-	-	1 ～ 8	4 ～ 12	-	-	0.1 ～ 3	2 ～ 16	4 ～ 12	-
Type	Taper ball	Taper ball	Tapered square	Tapered square	Tapered radius	Tapered square	Tapered square	Tapered radius	Tapered square	Tapered radius	Tapered square	Tapered square	Tapered square	Tapered square	Tapered square	Tapered square	Taper ball	Taper ball	Taper ball	Tapered square	Tapered square	Tapered square	Tapered square	Taper ball	Tapered radius	Tapered square	Taper ball	Tapered square	Tapered square	Tapered square	Tapered square	Tapered square	Tapered square	Tapered square	Tapered square	Taper ball	Taper ball	Tapered square	Tapered square	Taper ball	Taper ball	Taper ball	Tapered radius	Taper ball	Taper ball
work material	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Copper[◎] / Resin[◎]	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○] / Aluminum[○] / Titanium[◎] / Copper[○] / Resin[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Cast Iron[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎]	general steel[○] / Quenched and tempered steel[○]	general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Cast Iron[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎]	Aluminum[◎] / Copper[◎] / Resin[◎]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Graphite[○]	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[◎] / Resin[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Titanium[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Titanium[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Titanium[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Aluminum[◎] / Copper[◎] / Resin[◎]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Aluminum[◎] / Copper[◎] / Resin[◎]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Aluminum[◎] / Copper[◎] / Resin[◎]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[◎] / Copper[◎] / Resin[◎]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Aluminum[◎] / Copper[◎] / Resin[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Aluminum[◎] / Copper[◎] / Resin[○]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Aluminum[◎] / Copper[◎] / Resin[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○] / Aluminum[○] / Titanium[◎] / Copper[○] / Resin[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎]	Aluminum[◎] / Copper[◎] / Resin[◎]	general steel[○] / Aluminum[◎] / Copper[◎] / Graphite[◎]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Graphite[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Copper[◎] / Graphite[○]	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[◎] / Resin[◎]	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Cast Iron[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / High Hardness Steel-HRC65[○] / Cast Iron[◎] / Aluminum[○] / Copper[○]	general steel[○] / Aluminum[◎] / Copper[◎] / Graphite[◎]
Blade length (l)(mm)	1 ～ 16	0.15 ～ 3	10 ～ 35	0.8 ～ 35	3 ～ 25	8 ～ 30	4 ～ 12	4 ～ 20	2 ～ 24	3 ～ 6.5	0.8 ～ 8	2 ～ 40	4 ～ 35	4 ～ 40	0.5 ～ 12	2 ～ 12	4 ～ 30	3 ～ 7	-	12 ～ 35	2 ～ 40	5 ～ 40	2 ～ 40	4 ～ 30	8 ～ 12	2 ～ 10	10 ～ 35	10 ～ 20	5 ～ 12	10 ～ 35	2 ～ 4	10 ～ 35	20 ～ 35	5 ～ 20	4 ～ 30	0.75 ～ 4.5	0.2 ～ 10	8 ～ 64	25 ～ 50	4 ～ 40	6 ～ 50	0.5 ～ 12	3 ～ 24	10 ～ 33	25 ～ 50
R Size(mm)	0.1 ～ 2	0.1 ～ 2	-	-	0.3 ～ 0.5	-	-	0.2 ～ 2	-	0 ～ 1	-	-	-	-	-	-	0.3 ～ 1.25	1 ～ 3	0.1 ～ 0.3	-	-	-	-	0.3 ～ 1.25	0.2 ～ 0.5	-	0.5 ～ 3	-	-	-	-	-	-	-	-	0.5 ～ 2	0.1 ～ 5	-	-	0.5 ～ 8	0.5 ～ 5	0.05 ～ 1.5	0.5 ～ 3	2 ～ 6	2 ～ 6
Number of flutes(sheet)	2	2	4	2	2	4	2	2	2	2	2	4	2	2	2	4	4	2	1	4	2	2	multi-edged	multi-edged	multi-edged	2	2	2	2	4	2	4	4	2	2	3	2	2	2	2	2	2	3	2	2
Shank diameter (d)(mm)	4 ～ 10	4 ～ 6	6 ～ 16	4 ～ 20	3 ～ 12	4 ～ 12	4 ～ 12	4 ～ 12	4 ～ 12	4 ～ 8	3 ～ 8	3 ～ 6	4 ～ 16	3 ～ 25	3 ～ 10	3 ～ 4	4 ～ 6	4 ～ 10	4	4 ～ 16	3 ～ 20	4 ～ 20	3 ～ 8	3 ～ 6	4	3 ～ 10	4 ～ 16	4 ～ 16	4 ～ 12	6 ～ 16	3 ～ 4	6 ～ 16	6 ～ 12	4 ～ 16	3 ～ 16	6	4 ～ 12	4 ～ 20	6 ～ 20	4 ～ 25	4 ～ 25	3 ～ 10	6 ～ 20	10 ～ 16	6 ～ 20
Overall Length (L)(mm)	50 ～ 70	50 ～ 110	50 ～ 90	45 ～ 100	40 ～ 70	45 ～ 90	45 ～ 75	45 ～ 80	50 ～ 70	40 ～ 50	38 ～ 50	40 ～ 80	45 ～ 90	40 ～ 110	35 ～ 50	40 ～ 50	45 ～ 70	40 ～ 75	45	60 ～ 90	40 ～ 120	45 ～ 110	35 ～ 80	35 ～ 60	45	35 ～ 70	50 ～ 100	45 ～ 100	45 ～ 75	50 ～ 90	35 ～ 45	50 ～ 90	60 ～ 90	50 ～ 90	35 ～ 90	60 ～ 110	50 ～ 140	50 ～ 130	90 ～ 120	45 ～ 90	55 ～ 150	35 ～ 55	70 ～ 220	160 ～ 280	90 ～ 120
Coating	TiAlN	TiAlN	TiCN	TiAlN	Non-Coated	Non-Coated	Non-Coated	TiCN	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	TiCN	TiAlN	Non-Coated	Non-Coated	-	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	TiAlN	Non-Coated	TiAlN	TiAlN	TiAlN	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	TiCN	TiCN	Non-Coated	Non-Coated	Non-Coated	For High Hardness (Silicon Group)	TiAlN	Non-Coated	Non-Coated	Non-Coated	Non-Coated	-	-	TiAlN	Non-Coated

BrandNhãn hiệu
Product SeriesDòng sản phẩm

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
BrandNhãn hiệu	NS TOOL	NS TOOL	UNION TOOL	NS TOOL	EIKOSHA	OSG	OSG	NS TOOL	MISUMI	MISUMI	UNION TOOL	NS TOOL	NS TOOL	EIKOSHA	ATOM	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	OSG	OSG	OSG	OSG	OSG	NS TOOL	NS TOOL	NS TOOL	NS TOOL	NS TOOL	NS TOOL	NS TOOL	NS TOOL	NS TOOL	NS TOOL	NS TOOL	NS TOOL	NS TOOL	EIKOSHA	EIKOSHA	EIKOSHA	ATOM	DIJET	DIJET	EIKOSHA
Product SeriesDòng sản phẩm	MTB230 MUGEN-COATING Tapered Ball End Mill	MRBTNH230 MUGEN COATING Premium 2-Flute Long Tapered Neck Ball End Mill	C-CTE 4000, UT Coat, 4-Flute Tapered	MTE230 MUGEN-COATING Tapered End Mill	Carbide Reverse Cutter (Carbide Solid Reverse Taper End Mill)	4-flute, Tapered Blade, Short Type MG-TPMS	Carbide End Mill (Trapezoidal Runner) MG-TRC	NTER-2X X-Coating Taper Radius End Mill	TSC series carbide tapered end mill, 2-flute / regular model	TSC series carbide end mill for runner grooves, for trapezoid runner grooves / 2-flute	C-CTE 2000, UT Coat, 2-Flute Tapered	MRT425 MUGEN-COATING Tapered End Mill for Deep Ribbing	Taper End Mill for Copper Electrode / Aluminum / Plastic DTE	Carbide Solid Taper End Mill (Medium)	Taper end mill 2 flutes	TSC series carbide tapered end mill, 4-flute / for deep ribbing	TSC series carbide tapered ball end mill, 4-flute / long model	TSC series carbide end mill for runner grooves, for tapered ball runner grooves / 2-flute	TSC series carbide tapered ball end mill (for engraving), 1-flute / crescent model	TSC series carbide tapered end mill, 4-flute / regular	2-flute, Tapered Blade, Short Type FX-MG-TPDS	2-flute, Tapered Blade, Short Type MG-TPDS	For Rib Grooves, Taper End Type FXS-RB-TPE	For Rib Grooves, Taper Ball End Type FXS-RB-TPB	For Rib Grooves, taper type with corner rounding FXS-RB-TPCR	Carbide Tapered End Mill NTE-2	Taper Ball End Mill	Tapered Long Blade End Mill NTEL-2	NER-2 Trapezoidal Runner End Mill	Carbide Tapered End Mill NTE-4	X Coated Taper End Mill NTE-2X	X Coated Taper End Mill NTE-4X	Tapered Long Blade End Mill NTEL-4	Tapered Medium Blade End Mill NTEM-2	X Coated Taper Medium Blade End Mill NTEM-2X	MUGEN-COATING PREMIUM 3-Flute Long Tapered Neck Ball End Mill MRBTNH345	MUGEN-COATING Extra Long Tapered Neck Ball End Mill MRBTN230L	Taper Long End Mill for Copper Electrode / Aluminum / Plastic DTEL	Carbide Air Wheel Solid Taper End Mill	Carbide Solid Taper Ball End Mill	Carbide Solid Long Taper Ball End Mill	Taper ball end mill 2 blades	One Cut Super Radius End Mill DV-OCSRTN	One Cut Ball Long Type DZ-OCLB-T	Carbide Air Hole Solid Taper Ball End Mill AHTBE

Loading...Tải…