Long Neck Ball End Mills (Carbide)（work material：Titanium）

• You can add up to 6 items per a category to the compare list. Compare

  

  HM Coated 2-flute, Long Neck Ball HSLB

  UNION TOOL

  [Features]· Compared to conventional products, this model achieves higher machining efficiency, longer service life and higher quality machining of hard mold materials at 40 HRC or more.· New HARDMAX coating adopted to maintain film hardness while improving oxidation resistance· Provides stable processing for water-soluble/oil-based cutting oil, oil mist, and air blow· The machining dimension has been improved by improving the wear resistance and setting the rake angle of the ball tip to negative· The rake angle on the outer circumference side of the ball has been set to weak negative, securing sharpness, providing an excellent processed surface and preventing deflection

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.05 ～ 3	0.08 ～ 4.8	0.3 ～ 60	3 ～ 6	2	45 ～ 120	Titanium[○]	-0.005～0.005 ～ -0.002～0.002	Curved surface / Side / Engraving / R Groove	For High Hardness (Silicon Group)	Long-Neck Ball

  From: 520,716 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  • On Sale Till 31/03/2025

  

  

  

  MRBH230 Long-Neck Ball, Hard (for High Hardness)

  NS TOOL

  [Features]・ The MUGEN Coating Premium for high hardness and the unique new shape give the tool excellent chipping resistance, and reduced chattering improves the finished surface.・ Achieves stable and long lifespan with long-time machining in high hardness range (48 to 65 HRC). In pursuit of the cutting diameter shape, the manufacturer improved the amount of tilt and machining precision.・ Supports high hardness materials up to 68 HRC.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.05 ～ 3	0.07 ～ 6	0.2 ～ 50	4 ～ 6	2	45 ～ 120	Titanium[◎]	0.005～-0.005	Curved surface / Side / Engraving / R Groove	For High Hardness (Silicon Group)	Long-Neck Ball

  From: 607,275 VND
  Special Price
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  MRB230 MUGEN-COATING Long Neck Ball End Mill (for Deep Ribbing)

  NS TOOL

  [Features]・ Neck relief type suitable for narrow deep machining. Supports deep cutting precision 3D machining from low speed to high speed.・ Available in a total of 282 sizes.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.05 ～ 3	0.07 ～ 6	0.3 ～ 50	4 ～ 6	2	45 ～ 120	Titanium[○]	0.005～-0.005 ～ 0.01～-0.01	Curved surface / Side / Engraving / R Groove	TiAlN	Long-Neck Ball

  From: 589,345 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  UT Coat, 2-flute Ball CSEB

  UNION TOOL

  [Features]· With optimized blade shape, outstanding surface roughness is achieved for finishing and excellent wear resistance for roughing.· New UTCOAT with improved hardness, toughness, lubricity and adhesion is used to increase the wear resistance and surface roughness.· Supports a wide range from copper and raw materials to 55 HRC.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.1 ～ 6	0.3 ～ 18	-	4 ～ 12	2	50 ～ 110	Titanium[○]	-0.007～0.007 ～ -0.005～0.005	Curved surface / Side / Engraving / R Groove	TiCN	Ball

  From: 513,634 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Long Neck Ball Type, 2-Flute WXL-LN-EBD

  OSG

  The hard lubricant film WXL coating is effective for a wide range of processing, from mold materials to copper electrodes.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.05 ～ 3	0.08 ～ 6	0.3 ～ 50	3 ～ 6	2	45 ～ 120	Titanium[○]	-0.005～+0.005	Curved surface / Side / Engraving / R Groove	For General Steels (AlCrN, etc.)	Long-Neck Ball

  From: 463,333 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  HSB, HM Coated 2-Flute Ball

  UNION TOOL

  [Features]· Compared to conventional products, this model achieves higher machining efficiency, longer service life and higher quality machining of hard mold materials at 40 HRC or more.· New HARDMAX coating adopted to maintain film hardness while improving oxidation resistance· Provides stable processing for water-soluble/oil-based cutting oil, oil mist, and air blow· The machining dimension has been improved by improving the wear resistance and setting the rake angle of the ball tip to negative· The rake angle on the outer circumference side of the ball has been set to weak negative, securing sharpness, providing an excellent processed surface and preventing deflection

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.03 ～ 6	0.06 ～ 22	-	4 ～ 12	2	50 ～ 110	Titanium[○]	-0.007～0.007 ～ -0.002～0.002	Curved surface / Side / Engraving / R Groove	For High Hardness (Silicon Group)	Ball

  From: 513,634 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  HLB, HM Coat, 2-Flute Long Neck Ball End Mill

  UNION TOOL

  [Features]· Can even be used to cut 65 HRC high speed steel material, with outstanding heat resistance temperature and lubricity· Provides unprecedented long life and can be used for both dry and wet applications

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.4 ～ 3	0.64 ～ 4.8	3 ～ 30	4 ～ 6	2	45 ～ 80	Titanium[○]	-0.002～0.002	Curved surface / Side / Engraving / R Groove	For High Hardness (Silicon Group)	Long-Neck Ball

  From: 546,486 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  UT COAT 2-Flute Long-Neck Ball CSLEB

  UNION TOOL

  [Features]· With optimized blade shape, outstanding surface roughness is achieved for finishing and excellent wear resistance for roughing.· New UTCOAT with improved hardness, toughness, lubricity and adhesion is used to increase the wear resistance and surface roughness.· Supports a wide range from copper and raw materials to 55 HRC.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.05 ～ 3	0.08 ～ 4.8	0.3 ～ 60	3 ～ 6	2	45 ～ 120	Titanium[○]	-0.005～0.005 ～ -0.002～0.002	Curved surface / Side / Engraving / R Groove	TiCN	Long-Neck Ball

  From: 520,716 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MRBTN230 MUGEN-COATING Long Tapered Neck Ball End Mill

  NS TOOL

  [Features]・ The lower neck is tapered to improve tool rigidity.・ It is possible to make a large cutting depth compared to conventional products.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.1 ～ 2	0.2 ～ 4	1 ～ 60	4 ～ 8	2	50 ～ 110	Titanium[○]	0.005～-0.005 ～ 0.01～-0.01	Curved surface / R Groove	TiAlN	Tapered neck ball

  From: 975,335 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Long Neck Ball Type, 2-Flute WXL-HS-LN-EBD

  OSG

  WXL coating with excellent lubricity and abrasion resistance. Can be used with a wide range of work materials and cutting applications

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.3 ～ 1.5	0.5 ～ 2.4	1.5 ～ 12	4	2	35 ～ 40	Titanium[○]	-0.005～+0.005	Curved surface / Side / Engraving / R Groove	For General Steels (AlCrN, etc.)	Long-Neck Ball

  From: 628,133 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Long Neck Ball Type, 2-Flute FX-LN-EBD-6

  OSG

  Ball end mill long neck type for high-speed machining that fully draws out the performance of high-speed/high-precision machining centers.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.25 ～ 3	0.5 ～ 6	2.5 ～ 30	6	2	60 ～ 90	Titanium[○]	-0.005～+0.005	Curved surface / Side / Engraving / R Groove	TiAlN	Long-Neck Ball

  From: 2,798,335 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Long Neck Ball Type, 2-Flute for High Hardness WXS-LN-EBD

  OSG

  Ultra-heat-resistant, ultra-hard WX super coated long neck ball. The effective length can be selected to suit the machining shape.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.05 ～ 3	0.08 ～ 4.8	0.3 ～ 50	4 ～ 6	2	45 ～ 120	Titanium[○]	-0.005～+0.005	Curved surface / Side / Engraving / R Groove	For High Hardness (Silicon Group)	Long-Neck Ball

  From: 443,333 VND
  Days to Ship: Số ngày giao hàng: Quote

  Quote

• You can add up to 6 items per a category to the compare list. Compare

  

  Long Neck Ball Type, 2-Flute WX-LN-EBD

  OSG

  A long neck ball end mill whose length of cut can be freely selected according to the machining application shape. High-toughness carbide base material realizes stable cutting in a wide range of machining.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.1 ～ 3	0.16 ～ 4.8	0.5 ～ 50	4 ～ 6	2	45 ～ 120	Titanium[○]	-0.01～+0.01	Curved surface / Side / Engraving / R Groove	TiAlN	Long-Neck Ball

  From: 972,384 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  HB, HM Coated, 2-Flute Ball End Mill [Alteration Supported Product]

  UNION TOOL

  [Features]· Compared to conventional products, this model achieves higher machining efficiency, longer service life and higher quality machining of hard mold materials at 40 HRC or more.· New HARDMAX coating adopted to maintain film hardness while improving oxidation resistance· Provides stable processing for water-soluble/oil-based cutting oil, oil mist, and air blow· The machining dimension has been improved by improving the wear resistance and setting the rake angle of the ball tip to negative· The rake angle on the outer circumference side of the ball has been set to weak negative, securing sharpness, providing an excellent processed surface and preventing deflection

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.1 ～ 0.75	0.3 ～ 2.5	-	4	2	50	Titanium[○]	-0.005～0.005	Curved surface / Side / Engraving / R Groove	For High Hardness (Silicon Group)	Ball

  From: 563,011 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  HBL, HM Coated 2-Flute Long Shank Ball

  UNION TOOL

  [Features]· Long Shank Ball End Middle Series Supporting High-Hardness Materials· Uses HardMax coating compatible with high-speed machining of high-hardness materials· Capable of stable, long-life machining for both dry and wet type

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  1.5 ～ 6	4.5 ～ 25	-	3 ～ 12	2	80 ～ 200	Titanium[○]	-0.007～0.007 ～ -0.005～0.005	Curved surface / Side / Engraving / R Groove	For High Hardness (Silicon Group)	Ball

  From: 1,712,050 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  HTNB HM coat 2-flute taper neck ball end mill

  UNION TOOL

  [Features]· High rigidity realized through an improved taper neck shape.· Adopts the HARDMAX coating that realizes outstanding heat resistance and lubricity· 65 HRC high hardness materials can also be cut

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.1 ～ 2	0.16 ～ 50	1.5 ～ 62	4 ～ 6	2	4 ～ 120	Titanium[○]	-0.005～0.005	Curved surface / Side / Engraving / R Groove	For High Hardness (Silicon Group) / For General Steels (AlCrN, etc.)	Tapered neck ball

  From: 1,074,285 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CFB, for Raw Wood to Machining, 3-Flute Ball [Alteration Supported Product]

  UNION TOOL

  [Features]· 3-flute type achieves remarkably high feed. Shortens the roughing time· Deep cutting is possible, enabling high efficiency machining even with shape processing where feeding speed cannot be increased· Designed with 3-flute variable split to suppress chatter.· It uses UTCOAT and can support a wide range from raw materials through low/medium hardness materials up to 55 HRC· Provides excellent chip discharge performance and outstanding finished surface roughness with 3-groove tip shape (excluding R0.75 and below)

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.3 ～ 6	0.9 ～ 18	-	4 ～ 12	3	50 ～ 120	Titanium[◎]	-0.01～0.01 ～ -0.005～0.005	Curved surface / Side / Engraving / R Groove	TiCN	Ball

  From: 891,729 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MRB230SF MUGEN-COATING Long Neck Ball End Mill with Short Shank (for Shrink Fitting)

  NS TOOL

  Short shank type (shrink fit) long neck ball end mill

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.1 ～ 1.5	0.15 ～ 2.5	0.5 ～ 20	4	2	35 ～ 50	Titanium[○]	0.005～-0.005	Curved surface / Side / Engraving / R Groove	TiAlN	Long-Neck Ball

  From: 686,354 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  CFLB, UT Coat 3-Flute Long Neck Ball End Mill

  UNION TOOL

  [Features]· Provides amazing high feed compared to the conventional 2-flute long neck ball.· With new UTCOAT, outstanding lubricity and long life are achieved.· Designed with 3-flute variable split to reduce chatter, enabling high precision die cutting.· Provides excellent chip discharge performance and outstanding finished surface roughness with 3-groove tip design (excluding R0.75 and below)· O.D. Tolerance: 0/-0.02

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.3 ～ 3	0.48 ～ 4.8	2 ～ 40	4 ～ 6	3	50 ～ 90	Titanium[◎]	-0.007～0.007 ～ -0.005～0.005	Curved surface / Side / Engraving / R Groove	TiCN	Long-Neck Ball

  From: 902,746 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroMill Plura, Ball End Mill, Center Cut, RA216.42 (Hardness < 63 HRC)

  SANDVIK

  High quality carbide end mill tools for a highly productive, efficient and reliable milling solution

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.2 ～ 0.5	0.3 ～ 1	1 ～ 10	6	2	54 ～ 57	Titanium[○]	-	Curved surface	Other	Long-Neck Ball

  From: 3,339,521 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide 2-Flute Long Ball End Mill 30° B242X

  7 LEADERS

  [Features]· 2-flute long shank ball end mill that supports a wide range of work materials.· Capable of continuous stable cutting.· Nanoparticle multilayer coating.· Excellent lubricity and abrasion resistance.· Exhibits its strength in general cutting processes.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  1.5 ～ 10	6 ～ 38	-	4 ～ 20	2	80 ～ 210	Titanium[○]	±10	Curved surface / Engraving / R Groove	-	Ball

  From: 622,486 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide 2-Flute Ultra Long Ball End Mill 30° B246X

  7 LEADERS

  [Features]· 2-flute ultra-long shank ball end mill that supports a wide range of work materials.· Capable of continuous stable cutting.· Nanoparticle multilayer coating.· Suitable for a wide range of work materials from general steel to high hardness steel.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  1 ～ 6	4 ～ 22	-	3 ～ 12	2	100 ～ 210	Titanium[○]	±10	Curved surface / Engraving / R Groove	-	Ball

  From: 1,398,282 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MRBLN230-6 MUGEN COATING Long Neck Ball End Mill ⌀6 Shank Diameter Type (For Deep Ribbing)

  NS TOOL

  [Features]· NS original deep ribbing end mill with MUGEN coating applied. · Neck relief type suitable for narrow deep processing.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.15 ～ 1	0.3 ～ 2	3 ～ 20	-	2	-	Titanium[○]	-0.01 to 0.01	Curved surface	TiAlN	Long-Neck Ball

  From: 2,136,626 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  2-Flutes Short-Shank Long-Neck Ball End Mills HSLB-S

  UNION TOOL

  [Features] · Can be used for machining at short overhang lengths.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.1 ～ 3	0.16 ～ 4.8	0.5 ～ 20	4 ～ 6	2	35 ～ 50	Titanium[○]	±3 ～ ±5	-	-	Long-Neck Ball

  From: 512,665 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

BrandNhãn hiệu
Product SeriesDòng sản phẩm
From
Days to ShipSố ngày giao hàng
R Size(mm)
Blade length (ℓ)(mm)
Underneck length (ℓ1)(mm)
Shank diameter (d)(mm)
Number of flutes(sheet)
Overall Length (L)(mm)
work material
R Precision(μm)
Machining Application
Coating
Type

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare On Sale Till 31/03/2025	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
BrandNhãn hiệu	UNION TOOL	NS TOOL	NS TOOL	UNION TOOL	OSG	UNION TOOL	UNION TOOL	UNION TOOL	NS TOOL	OSG	OSG	OSG	OSG	UNION TOOL	UNION TOOL	UNION TOOL	UNION TOOL	NS TOOL	UNION TOOL	SANDVIK	7 LEADERS	7 LEADERS	NS TOOL	UNION TOOL
Product SeriesDòng sản phẩm	HM Coated 2-flute, Long Neck Ball HSLB	MRBH230 Long-Neck Ball, Hard (for High Hardness)	MRB230 MUGEN-COATING Long Neck Ball End Mill (for Deep Ribbing)	UT Coat, 2-flute Ball CSEB	Long Neck Ball Type, 2-Flute WXL-LN-EBD	HSB, HM Coated 2-Flute Ball	HLB, HM Coat, 2-Flute Long Neck Ball End Mill	UT COAT 2-Flute Long-Neck Ball CSLEB	MRBTN230 MUGEN-COATING Long Tapered Neck Ball End Mill	Long Neck Ball Type, 2-Flute WXL-HS-LN-EBD	Long Neck Ball Type, 2-Flute FX-LN-EBD-6	Long Neck Ball Type, 2-Flute for High Hardness WXS-LN-EBD	Long Neck Ball Type, 2-Flute WX-LN-EBD	HB, HM Coated, 2-Flute Ball End Mill [Alteration Supported Product]	HBL, HM Coated 2-Flute Long Shank Ball	HTNB HM coat 2-flute taper neck ball end mill	CFB, for Raw Wood to Machining, 3-Flute Ball [Alteration Supported Product]	MRB230SF MUGEN-COATING Long Neck Ball End Mill with Short Shank (for Shrink Fitting)	CFLB, UT Coat 3-Flute Long Neck Ball End Mill	CoroMill Plura, Ball End Mill, Center Cut, RA216.42 (Hardness < 63 HRC)	Carbide 2-Flute Long Ball End Mill 30° B242X	Carbide 2-Flute Ultra Long Ball End Mill 30° B246X	MRBLN230-6 MUGEN COATING Long Neck Ball End Mill ⌀6 Shank Diameter Type (For Deep Ribbing)	2-Flutes Short-Shank Long-Neck Ball End Mills HSLB-S
From	520,716 VND	607,275 VND Special Price On Sale Till 31/03/2025	589,345 VND	513,634 VND	463,333 VND	513,634 VND	546,486 VND	520,716 VND	975,335 VND	628,133 VND	2,798,335 VND	443,333 VND	972,384 VND	563,011 VND	1,712,050 VND	1,074,285 VND	891,729 VND	686,354 VND	902,746 VND	3,339,521 VND	622,486 VND	1,398,282 VND	2,136,626 VND	512,665 VND
Days to ShipSố ngày giao hàng	Same day or more	Same day or more	8 Day(s) or more	6 Day(s) or more	Same day or more	6 Day(s) or more	7 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	Quote	6 Day(s) or more	8 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	9 Day(s)	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	8 Day(s) or more	6 Day(s) or more	9 Day(s)
R Size(mm)	0.05 ～ 3	0.05 ～ 3	0.05 ～ 3	0.1 ～ 6	0.05 ～ 3	0.03 ～ 6	0.4 ～ 3	0.05 ～ 3	0.1 ～ 2	0.3 ～ 1.5	0.25 ～ 3	0.05 ～ 3	0.1 ～ 3	0.1 ～ 0.75	1.5 ～ 6	0.1 ～ 2	0.3 ～ 6	0.1 ～ 1.5	0.3 ～ 3	0.2 ～ 0.5	1.5 ～ 10	1 ～ 6	0.15 ～ 1	0.1 ～ 3
Blade length (ℓ)(mm)	0.08 ～ 4.8	0.07 ～ 6	0.07 ～ 6	0.3 ～ 18	0.08 ～ 6	0.06 ～ 22	0.64 ～ 4.8	0.08 ～ 4.8	0.2 ～ 4	0.5 ～ 2.4	0.5 ～ 6	0.08 ～ 4.8	0.16 ～ 4.8	0.3 ～ 2.5	4.5 ～ 25	0.16 ～ 50	0.9 ～ 18	0.15 ～ 2.5	0.48 ～ 4.8	0.3 ～ 1	6 ～ 38	4 ～ 22	0.3 ～ 2	0.16 ～ 4.8
Underneck length (ℓ1)(mm)	0.3 ～ 60	0.2 ～ 50	0.3 ～ 50	-	0.3 ～ 50	-	3 ～ 30	0.3 ～ 60	1 ～ 60	1.5 ～ 12	2.5 ～ 30	0.3 ～ 50	0.5 ～ 50	-	-	1.5 ～ 62	-	0.5 ～ 20	2 ～ 40	1 ～ 10	-	-	3 ～ 20	0.5 ～ 20
Shank diameter (d)(mm)	3 ～ 6	4 ～ 6	4 ～ 6	4 ～ 12	3 ～ 6	4 ～ 12	4 ～ 6	3 ～ 6	4 ～ 8	4	6	4 ～ 6	4 ～ 6	4	3 ～ 12	4 ～ 6	4 ～ 12	4	4 ～ 6	6	4 ～ 20	3 ～ 12	-	4 ～ 6
Number of flutes(sheet)	2	2	2	2	2	2	2	2	2	2	2	2	2	2	2	2	3	2	3	2	2	2	2	2
Overall Length (L)(mm)	45 ～ 120	45 ～ 120	45 ～ 120	50 ～ 110	45 ～ 120	50 ～ 110	45 ～ 80	45 ～ 120	50 ～ 110	35 ～ 40	60 ～ 90	45 ～ 120	45 ～ 120	50	80 ～ 200	4 ～ 120	50 ～ 120	35 ～ 50	50 ～ 90	54 ～ 57	80 ～ 210	100 ～ 210	-	35 ～ 50
work material	Titanium[○]	Titanium[◎]	Titanium[○]	Titanium[○]	Titanium[○]	Titanium[○]	Titanium[○]	Titanium[○]	Titanium[○]	Titanium[○]	Titanium[○]	Titanium[○]	Titanium[○]	Titanium[○]	Titanium[○]	Titanium[○]	Titanium[◎]	Titanium[○]	Titanium[◎]	Titanium[○]	Titanium[○]	Titanium[○]	Titanium[○]	Titanium[○]
R Precision(μm)	-0.005～0.005 ～ -0.002～0.002	0.005～-0.005	0.005～-0.005 ～ 0.01～-0.01	-0.007～0.007 ～ -0.005～0.005	-0.005～+0.005	-0.007～0.007 ～ -0.002～0.002	-0.002～0.002	-0.005～0.005 ～ -0.002～0.002	0.005～-0.005 ～ 0.01～-0.01	-0.005～+0.005	-0.005～+0.005	-0.005～+0.005	-0.01～+0.01	-0.005～0.005	-0.007～0.007 ～ -0.005～0.005	-0.005～0.005	-0.01～0.01 ～ -0.005～0.005	0.005～-0.005	-0.007～0.007 ～ -0.005～0.005	-	±10	±10	-0.01 to 0.01	±3 ～ ±5
Machining Application	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface	Curved surface / Engraving / R Groove	Curved surface / Engraving / R Groove	Curved surface	-
Coating	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	TiAlN	TiCN	For General Steels (AlCrN, etc.)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	TiCN	TiAlN	For General Steels (AlCrN, etc.)	TiAlN	For High Hardness (Silicon Group)	TiAlN	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group) / For General Steels (AlCrN, etc.)	TiCN	TiAlN	TiCN	Other	-	-	TiAlN	-
Type	Long-Neck Ball	Long-Neck Ball	Long-Neck Ball	Ball	Long-Neck Ball	Ball	Long-Neck Ball	Long-Neck Ball	Tapered neck ball	Long-Neck Ball	Long-Neck Ball	Long-Neck Ball	Long-Neck Ball	Ball	Ball	Tapered neck ball	Ball	Long-Neck Ball	Long-Neck Ball	Long-Neck Ball	Ball	Ball	Long-Neck Ball	Long-Neck Ball

Loading...Tải…