Ball End Mills (Carbide)（work material：High Hardness Steel-HRC55）

• You can add up to 6 items per a category to the compare list. Compare

  

  Ball End Type, 2-Flute WXL-EBD

  OSG

  [Features]· High-accuracy ball end mill coated with WXL hard lubricating film coating. Proven performance on a wide range of work materials. Long life regardless of whether being used for dry-type or wet-type machining.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.05 ～ 10	0.2 ～ 38	-	4 ～ 20	2	40 ～ 160	High Hardness Steel-HRC55[○]	-0.007 to 0.003 ～ ±0.01	Curved surface / Side / Engraving / R Groove	For General Steels (AlCrN, etc.)	Ball

  From: 483,333 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MRC Series Carbide Ball End Mill, for Heat-Treated Steel Machining, 2-Flute / Short Model

  MISUMI

  High-performance products with emphasis on the machined surface accuracy are available in the deferred prices of the conventional products!

  • Volume Discount

  • MR
  • General Steel
  • 2 Flutes
  • S (Short)

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.1 ～ 10	0.4 ～ 25	-	4 ～ 20	2	50 ～ 150	High Hardness Steel-HRC55[◎]	±0.005 ～ ±0.01	Curved surface / Side / Engraving / R Groove	MRC	Ball

  From: 461,043 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Pencil-Neck Type, 3-Flute PHX-PC-DBT

  OSG

  Realizes high efficiency machining that will change the way you think about deep engraving. The unique spiral ball blade prevents vibration during deep-engraving and achieves stable high-feed cutting.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.5 ～ 6	1.5 ～ 18	6 ～ 160.8	6 ～ 20	3	60 ～ 220	High Hardness Steel-HRC55[◎]	-	Curved surface / Side / Engraving / R Groove	For High Hardness (Silicon Group)	Ball

  From: 2,341,749 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MRC Series Carbide Ball End Mill, for Heat-Treated Steel Machining, 2-Flute / Regular Model

  MISUMI

  The user friendly regular flute length type is released simultaneously

  • Volume Discount

  • MR
  • General Steel
  • 2 Flutes
  • R (Regular)

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.2 ～ 8	1.5 ～ 30	-	4 ～ 16	2	50 ～ 140	High Hardness Steel-HRC55[◎]	±0.005 ～ ±0.01	Curved surface / Side / Engraving / R Groove	MRC	Ball

  From: 463,676 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  • On Sale Till 31/03/2025

  

  XAL Series Carbide Ball End Mill, 2-Flute / Regular Model

  MISUMI

  The regular flute length type is introduced in the low-price and popular XAL balls

  • Volume Discount

  • XAL
  • General Steel
  • 2 Flutes

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.2 ～ 8	1.5 ～ 48	-	4 ～ 16	2	50 ～ 140	High Hardness Steel-HRC55[○]	-0.007 ~ +0.003 ～ ±0.01	Curved surface / Side / Engraving / R Groove	For General Steels (AlCrN, etc.)	Ball

  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MSB230 MUGEN-COATING 2-Flute Ball End Mill

  NS TOOL

  [Notice] Alterations can now be specified. Please select from "Standard/Alterations Category" of narrowing conditions.[Features]・ Supports precision 3D machining from low speed to high speed.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.05 ～ 6	0.1 ～ 20	-	4 ～ 12	2	50 ～ 110	High Hardness Steel-HRC55[◎]	0.005～-0.005 ～ 0.01～-0.01	Curved surface / R Groove	TiAlN	Ball

  From: 569,109 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  One Cut Ball Long Type DZ-OCLB-S

  DIJET

  Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  2 ～ 12.5	12 ～ 50	-	4 ～ 25	2	120 ～ 220	High Hardness Steel-HRC55[○]	10～-10	Curved surface / R Groove	TiAlN	Ball

  From: 2,690,533 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  2-Flute Ball End Mill (GS-EBD)

  OSG KOREA CORP

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.05 ～ 12.5	0.2 ～ 50	-	4 ～ 25	2	40 ～ 180	High Hardness Steel-HRC55[○]	-	Curved surface / Side / Engraving / R Groove	FX	Ball

  From: 752,214 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  • On Sale Till 31/03/2025

  

  XAL series carbide ball end mill, 2-flute / short model

  MISUMI

  XAL Series is the definitive choice for cost-sensitive customers

  • Volume Discount

  • XAL
  • General Steel
  • 2 Flutes

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.05 ～ 10	0.2 ～ 38	-	3 ～ 20	2	40 ～ 160	High Hardness Steel-HRC55[○]	-0.007 ~ +0.003 ～ ±0.01	Curved surface / Side / Engraving / R Groove	For General Steels (AlCrN, etc.)	Ball

  From: 328,423 VND
  Special Price
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  GS MILL Ball 2GSR

  NACHI(FUJIKOSHI)

  Supports a wide range of materials from raw materials to hardened materials. Suitable for processing of curved surfaces.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  5	15	-	10	2	100	High Hardness Steel-HRC55[◎]	-0.01～+0.01	Curved surface / Side / Engraving / R Groove	TiAlN	Ball

  From: 2,050,211 VND
  Days to Ship: Số ngày giao hàng: 10 Day(s) or more

  10 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Ball End Type, 2-Flute WXS-EBD

  OSG

  Ultra-heat-resistant, ultra-hard WX super coated high precision ball end mill. Ideal for high-speed direct engraving of hardened steel as well as, of course, high-speed general steel machining.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.5 ～ 6	1 ～ 18	2 ～ 10	4 ～ 12	2	50 ～ 110	High Hardness Steel-HRC55[◎]	-0.007～+0.007 ～ -0.005～+0.005	Curved surface / Side / Engraving / R Groove	For High Hardness (Silicon Group)	Ball

  From: 553,333 VND
  Days to Ship: Số ngày giao hàng: 17 Day(s) or more

  17 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Long Shank Ball Type, 2-Flute FX-LS-MG-EBD

  OSG

  The long shank allows machining in deep sections

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  3	12	-	6	2	140	High Hardness Steel-HRC55[◎]	-0.01～+0.01	Curved surface / Side / Engraving / R Groove	TiAlN	Ball

  From: 3,348,954 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Ball End Type, 2-Flute FX-HO-MG-EBD

  OSG

  The oil hole shows its true performance when drilling deep holes where chip discharge can be problematic.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  3 ～ 10	12 ～ 38	-	6 ～ 20	2	90 ～ 160	High Hardness Steel-HRC55[◎]	-0.01～+0.01	Curved surface / Side / Engraving / R Groove	TiAlN	Ball

  From: 3,549,214 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Ball End Type, 2-Flute WXL-PC-EBD

  OSG

  [Features]· WXL coating with excellent lubrication and wear resistance. Can be used with a wide range of work materials and cutting applications

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.1 ～ 6	0.16 ～ 12	1 ～ 80	4 ～ 16	2	45 ～ 160	High Hardness Steel-HRC55[○]	-0.005 to +0.005 ～ -0.005～+0.005	Curved surface / Side / Engraving / R Groove	For General Steels (AlCrN, etc.)	Ball

  From: 805,371 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MSBH345 3-Flute Ball-End Mill for High-Hardness

  NS TOOL

  [Notice] Alterations can now be specified. Please select from "Standard/Alterations Category" of narrowing conditions.[Features]・ The MUGEN Coating Premium for high hardness and the unique new shape give the tool excellent chipping resistance, and reduced chattering improves the finished surface.・ Achieves stable and long lifespan with long-time machining in high hardness range (48 to 65 HRC). In pursuit of the cutting diameter shape, the manufacturer improved the amount of tilt and machining precision.・ High efficiency machining with less chattering is possible by adopting unique 3-flute shape and unequal division.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.5 ～ 3	1.5 ～ 10	-	6	3	60 ～ 80	High Hardness Steel-HRC55[◎]	0.01～-0.01	Curved surface / Side / Engraving / R Groove	For High Hardness (Silicon Group)	Ball

  From: 1,697,886 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MSB230SF MUGEN-COATING Ball End Mill with Short Shank (for Shrink Fitting)

  NS TOOL

  [Notice] Alterations can now be specified. Please select from "Standard/Alterations Category" of narrowing conditions.[Features]・ Short shank type (shrink fit) long neck ball end mill

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.1 ～ 6	0.2 ～ 12	-	4 ～ 12	2	35 ～ 60	High Hardness Steel-HRC55[◎]	0.005～-0.005 ～ 0.01～-0.01	Curved surface / Side / Engraving / R Groove	TiAlN	Ball

  From: 632,060 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide ball end mill (R accuracy ±3μm)

  MISUMI

  [Features]·Radius tolerance within 6 µm (compared to the manufacturer measurement), shank diameter tolerance h5 standard adopted. Optimal for high precision 3D machining of molds with high-quality tools with little variation in quality·Seamless shape (sharpening from outer edge to center of rounded blade in 1 process) is designed to create smooth cutting edge flank with no steps

  • Volume Discount

  • TS
  • General Steel
  • 2 Flutes
  • S (Short)

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  1.5 ～ 3	4.5 ～ 9	-	6	2	60 ～ 90	High Hardness Steel-HRC55[○]	-0.005 ~ +0.001 ～ ±0.003	Curved surface / Side / Engraving / R Groove	For High Hardness (Silicon Group)	Ball

  From: 1,240,084 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide ball end mill (for shrink fit holder / R accuracy ±3 μm) 2-flute / stub model

  MISUMI

  [Features]·Designed with optimum blade length, shank length and overall length considering processing using shrink fit holder·Radius tolerance within 6 µm (compared to the manufacturer measurement), shank diameter tolerance h5 standard adopted. High precision tools with little quality variation are ideal for high precision 3D machining of molds·Seamless shape (sharpening from outer edge to center of rounded blade in 1 process) is designed to create smooth cutting edge flank with no steps

  • Volume Discount

  • TS
  • General Steel
  • 2 Flutes
  • B (Stub)

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.3 ～ 2	0.6 ～ 4	-	6	2	40	High Hardness Steel-HRC55[○]	±0.003	Curved surface / Side / Engraving / R Groove	For High Hardness (Silicon Group)	Ball

  From: 1,362,905 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide ball end mill, for shrinkage fitting, 2-flute / stub model

  MISUMI

  [Features]·Compatible with shrink fit chucks for high-precision machining·Designed with short flute length and overall length for shrink fit and emphasis on rigidityIt has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties

  • Volume Discount

  • TS
  • General Steel
  • 2 Flutes
  • B (Stub)

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.2 ～ 6	0.4 ～ 12	-	4 ～ 12	2	40 ～ 65	High Hardness Steel-HRC55[○]	-0.007 ~ +0.003 ～ ±0.005	Curved surface / Side / Engraving / R Groove	For High Hardness (Silicon Group)	Ball

  From: 531,732 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  XAC series carbide ball end mill, 2-flute / short model

  MISUMI

  [Features]·General purpose 2-blade ball end mill for wide range of profiling·For surface coarse of workpiece, good surface finish can be expected after machining.·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  • TiAlN
  • General Steel
  • 2 Flutes
  • S (Short)

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.2 ～ 12.5	0.8 ～ 50	-	3 ～ 25	2	40 ～ 180	High Hardness Steel-HRC55[○]	±0.01	Curved surface / Side / Engraving / R Groove	TiAlN	Ball

  From: 517,970 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  XAC series carbide ball end mill, 2-flute / short, long shank model

  MISUMI

  [Features]·Ideal for high accuracy 3D machining of molds due to high tool rigidity and excellent chip removal capability·For surface coarse of workpiece, good surface finish can be expected after machining.·Long shank type, ideal for deep cavity milling·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  • TiAlN
  • General Steel
  • 2 Flutes

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  2 ～ 8	8 ～ 30	-	4 ～ 16	2	100 ～ 250	High Hardness Steel-HRC55[○]	±0.01	Curved surface / Side / Engraving / R Groove	TiAlN	Ball

  From: 996,240 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC Series Carbide Ball End Mill 2-Flute / Short Type

  MISUMI

  [Features]·Good finish can be expected for surface coarse of workpiece after processingIt has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  • TS
  • General Steel
  • 2 Flutes
  • S (Short)

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.05 ～ 10	0.2 ～ 25	15 ～ 75	3 ～ 20	2	40 ～ 150	High Hardness Steel-HRC55[○]	-0.007 ~ +0.003 ～ ±0.01	Curved surface / Side / Engraving / R Groove	For High Hardness (Silicon Group)	Ball

  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide ball end mill, regular model

  MISUMI

  [Features]·Regular bridge length allows for many regrinding times·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  • TS
  • General Steel
  • 2 Flutes
  • R (Regular)

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.2 ～ 8	1.5 ～ 30	17 ～ 80	4 ～ 16	2	50 ～ 140	High Hardness Steel-HRC55[○]	-0.007 ~ +0.003 ～ ±0.01	Curved surface / Side / Engraving / R Groove	For High Hardness (Silicon Group)	Ball

  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  TSC series carbide ball end mill, 2-flute / short, long shank model

  MISUMI

  [Features]·Long shank type ideal for deep cavity millingIt has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  • TS
  • General Steel
  • 2 Flutes
  • S (Short)

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.5 ～ 12.5	2 ～ 30	15 ～ 80	3 ～ 25	2	70 ～ 280	High Hardness Steel-HRC55[○]	-0.007 ~ +0.003 ～ ±0.01	Curved surface / Side / Engraving / R Groove	For High Hardness (Silicon Group)	Ball

  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide ball end mill, 3-flute / short model

  MISUMI

  [Features]·3-flute shape is resistant to chattering and enables high feed·Surface coarse of workpiece after processing is very good finish.·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  • TS
  • General Steel
  • 3 Flutes
  • S (Short)

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.5 ～ 10	2 ～ 25	15 ～ 75	6 ～ 20	3	50 ～ 150	High Hardness Steel-HRC55[○]	±0.01	Curved surface / Side / Engraving / R Groove	For High Hardness (Silicon Group)	Ball

  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide ball end mill, 3-flute / regular model

  MISUMI

  [Features]·3-flute shape is resistant to chattering and enables high feed·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  • TS
  • General Steel
  • 3 Flutes
  • R (Regular)

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  1 ～ 6	5 ～ 22	17 ～ 72	6 ～ 12	3	50 ～ 110	High Hardness Steel-HRC55[○]	±0.01	Curved surface / Side / Engraving / R Groove	For High Hardness (Silicon Group)	Ball

  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC Series Carbide Ball End Mill 4-Flute / Short Type

  MISUMI

  [Features]·Surface coarse of workpiece after processing is very good finish.·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  • TS
  • General Steel
  • 4 Flutes
  • S (Short)

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  1 ～ 10	3 ～ 25	15 ～ 75	6 ～ 20	4	50 ～ 150	High Hardness Steel-HRC55[○]	±0.01	Curved surface / Side / Engraving / R Groove	For High Hardness (Silicon Group)	Ball

  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide ball end mill, 4-flute / regular model

  MISUMI

  [Features]·Surface coarse of workpiece after processing is very good finish.·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. As coating characteristic, it is effective in high-speed machining and dry machining.·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  • TS
  • General Steel
  • 4 Flutes
  • R (Regular)

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  1.5 ～ 6	5 ～ 22	17 ～ 72	6 ～ 12	4	60 ～ 110	High Hardness Steel-HRC55[○]	±0.01	Curved surface / Side / Engraving / R Groove	For High Hardness (Silicon Group)	Ball

  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TS Coated Carbide Ball End Mill, Cutting Edge Rigidity Machining / For High-Hardness Steel Machining, 2-Flute / No Side Blade

  MISUMI

  [Features]·Ultra-fine particle cemented carbide base material suitable for machining high hardness steel is used (according to the manufacturer cutting test results).·MISUMI original shape with cutting edge rigid treatment and no side cutting edge. High rigid tool and cutting edge strength, achieving stable cutting edge shape and long tool lifespan in high-speed milling·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  • TS
  • High-Hardness Steel
  • 2 Flutes

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  1 ～ 5	1 ～ 5	5 ～ 10	6 ～ 10	2	50 ～ 90	High Hardness Steel-HRC55[◎]	±0.01	Curved surface / Side / Engraving / R Groove	For High Hardness (Silicon Group)	Ball

  From: 2,514,992 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC Series Carbide Ball End Mill (for Shrink Fit Holder) for High-Hardness Steel Machining, 2-Flute / Stub Model

  MISUMI

  The high precision ball end mill for shrink fit holder is ideal for the high-precision 3D machining of high-hardness steel

  • Volume Discount

  • TS
  • High-Hardness Steel
  • 2 Flutes
  • B (Stub)

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.3 ～ 3	0.6 ～ 6	-	6	2	40	High Hardness Steel-HRC55[◎]	-0.005 ~ +0.001 ～ ±0.003	Curved surface / Side / Engraving / R Groove	For High Hardness (Silicon Group)	Ball

  From: 1,363,947 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC Series Carbide Ball End Mill (for Shrink Fit Holder) for High-Hardness Steel Machining, 2-Flute / Stub Model

  MISUMI

  The high precision ball end mill for shrink fit holder is ideal for the high-precision 3D machining of high-hardness steel

  • Volume Discount

  • TS
  • High-Hardness Steel
  • 2 Flutes
  • B (Stub)

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.5	1	-	4	2	40	High Hardness Steel-HRC55[◎]	±0.005	Curved surface / Side / Engraving / R Groove	For High Hardness (Silicon Group)	Ball

  From: 544,661 VND
  Days to Ship: Số ngày giao hàng: Same day

  Same day

• You can add up to 6 items per a category to the compare list. Compare

  

  CBN Ball End Mill, 2-Flute

  MISUMI

  CBN ball end mill that's ideal for precision finishing is available at a value price

  • Volume Discount

  • High-Hardness Steel
  • 2 Flutes

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.3 ～ 1	0.5 ～ 1.2	1.5 ～ 5	4	2	50	High Hardness Steel-HRC55[◎]	±0.005	Curved surface / Side / Engraving / R Groove	Non-Coated	Ball

  From: 3,921,372 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  XCP Coated Carbide Ball End Mill For Tempered Steel / High Hardness Steel Machining / 2-Flute / Stub Type

  MISUMI

  · A highly versatile series that's ideal for machining work materials from tempered steel (up to 45 HRC) to high hardness steel (up to 65 HRC).· Coating with excellent hardness and heat resistance makes it suitable for high speed machining. Popular ball end mill for high-hardness machining

  • Volume Discount

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.5 ～ 12.5	1 ～ 25	2.2 ～ 50	4 ～ 25	2	40 ～ 180	High Hardness Steel-HRC55[◎]	±5 ～ ±10	Curved surface / Side / Engraving / R Groove	For High Hardness (Silicon Group)	Ball

  From: 437,250 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SHC Series Carbide Ball End Mill, for High-Hardness Steel Machining, 2-Flute / Regular Model

  MISUMI

  [Features]·Realizes high durability by processing mold material of 60HRC or more·Machining of high hardness steel up to 65HRC is possible·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  • SH-a
  • High-Hardness Steel
  • 2 Flutes
  • R (Regular)

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  1 ～ 6	6 ～ 22	-	6 ～ 12	2	50 ～ 110	High Hardness Steel-HRC55[◎]	±0.005	Curved surface / Side / Engraving / R Groove	For High Hardness (Silicon Group)	Ball

  From: 715,386 VND
  Days to Ship: Số ngày giao hàng: Same day

  Same day

• You can add up to 6 items per a category to the compare list. Compare

  

  GS MILL Long Neck Hard Ball GSBNH2

  NACHI(FUJIKOSHI)

  [Features]· Ideal for fine machining of molds.· Available in various sizes and can be used for all kinds of machining.· Cutting blades with a tapered back make contact with a workpiece with a shorter length.· Tapered back for reduction of cutting resistance and achievement of good roughness of the finished surface

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.1 ～ 3	0.2 ～ 6	-	4 ～ 6	2	45 ～ 120	High Hardness Steel-HRC55[◎]	-	Curved surface / Side / Engraving / R Groove	TiAlN	Ball

  From: 813,042 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  X's Mill Geo Ball Long Shank 2GEOLSR

  NACHI(FUJIKOSHI)

  [Features]A carbide end mill with 2 flutes.The high cutting speed and high production efficiency lead to overall production cost reduction.The long shank allows contouring at deep positions and can be lengthened to suit the application.[Applications]Suitable for side milling, curved surface milling, engraving, and R-grooving.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.5 ～ 15	1.5 ～ 45	10 ～ 100	4 ～ 32	2	80 ～ 230	High Hardness Steel-HRC55[◎]	0～-0.04 ～ 0～-0.03	Curved surface / Side / Engraving / R Groove	TiAlN	Ball

  From: 1,962,867 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CBN Mold Finish Master BNBP

  NACHI(FUJIKOSHI)

  ·CBN ball end mill.·Suitable for high-speed finishing of high-hardness material dies.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.2 ～ 1	0.3 ～ 1.4	1.2 ～ 5.5	4 ～ 6	2	50	High Hardness Steel-HRC55[◎]	-	Curved surface / Side / Engraving / R Groove	-	Ball

  From: 7,987,208 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  GS MILL Hard Ball GSBH

  NACHI(FUJIKOSHI)

  Suitable for high-speed finishing of high-hardness molds.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.2 ～ 6	0.4 ～ 12	0.6 ～ 7.5	4 ～ 12	2	50 ～ 110	High Hardness Steel-HRC55[◎]	-	Curved surface / Side / Engraving / R Groove	TiAlN	Ball

  From: 1,855,065 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Mold Meister Ball 2MMR

  NACHI(FUJIKOSHI)

  Ideal for precision mold polish-free machining. Rounding accuracy: ±3 μm, rounding accuracy range: 180°

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.5 ～ 6	1.5 ～ 18	-	4 ～ 12	2	50 ～ 120	High Hardness Steel-HRC55[◎]	-0.003～+0.003	Curved surface / Side / Engraving / R Groove	TiAlN	Ball

  From: 4,454,124 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  X's Mill Geo Ball 2GEOR

  NACHI(FUJIKOSHI)

  Supports a wide range of applications from mold steel to high-hardness steel. Ideal for finishing molds.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.5 ～ 15	1.5 ～ 45	3 ～ 80	4 ～ 32	2	50 ～ 200	High Hardness Steel-HRC55[◎]	0～-0.04 ～ 0～-0.03	Curved surface / Side / Engraving / R Groove	TiAlN	Ball

  From: 1,680,968 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Short Pencil-neck Type, 2-Flute FX-PCS-EBD-6

  OSG

  Super ultra-fine particle carbide alloy and high rigidity pencil neck achieves high speeds, high precision, and a super long life. Also eliminates chattering problems inherent in fine shape processing and carving.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.1 ～ 2	0.16 ～ 3.2	1 ～ 30	6	2	50 ～ 100	High Hardness Steel-HRC55[○]	-0.005～+0.005	Curved surface / Side / Engraving / R Groove	TiAlN	Ball

  From: 2,798,335 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Ball End Type, 2-Flute FX-MG-EBD-3

  OSG

  A wide range of machining is possible with the adoption of FX coating and high-toughness carbide material.Coated for steelStandard/Alteration category: Manufacturer's standard productNumber of flutes (pcs.) 2Shank diameter (mm) 3, overall length (mm) 40, helix angle: standard helix (30 to 44°)R Accuracy (µm) ±10

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.2 ～ 1.5	0.8 ～ 8	-	3	2	40	High Hardness Steel-HRC55[◎]	-0.01～+0.01	Curved surface / Side / Engraving / R Groove	TiAlN	Ball

  From: 2,320,897 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Ball End Type, 2-Flute CBN-EBD

  OSG

  2-Flute Ball End Type CBN-EBD·Demonstrates high performance in machining high-rigid materials and cast iron·With a wide variety of lineup of CBN tools, you can select one of the best tool for your application.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  3 ～ 6	4 ～ 7	20	6 ～ 12	2	90 ～ 110	High Hardness Steel-HRC55[◎]	-0.01～+0.01	Curved surface / Side / Engraving / R Groove	Non-Coated	Ball

  From: 8,565,563 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Ball End Type, 2-Flute CBN-SXB

  OSG

  Spiral ball blade with unique torsion that provides a sharp cutting edge and deep cutting at a small diameter. CBN end mill which can be used for cutting with the feel of carbide

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.2 ～ 1.5	0.3 ～ 1.8	1.2 ～ 6	4 ～ 6	2	45 ～ 50	High Hardness Steel-HRC55[◎]	-0.005～+0.005	Curved surface / Side / Engraving / R Groove	Non-Coated	Ball

  From: 4,580,025 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Ball End Type, 2-Flute FX-MG-EBD

  OSG

  [Notice] Alterations can now be specified. Please select from "Standard/Alterations Category" of narrowing conditions.[Features]・ A wide range of machining from general materials to hardened steel is possible. The manufacturer can also support high-speed machining centers.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.5 ～ 15	2.5 ～ 55	-	4 ～ 25	2	50 ～ 180	High Hardness Steel-HRC55[◎]	-0.01～+0.01	Curved surface / Side / Engraving / R Groove	TiAlN	Ball

  From: 2,561,288 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

BrandNhãn hiệu
Product SeriesDòng sản phẩm
From
Days to ShipSố ngày giao hàng
SpecificationsĐặc điểm kĩ thuật
R Size(mm)
Blade length (ℓ)(mm)
Underneck length (ℓ1)(mm)
Shank diameter (d)(mm)
Number of flutes(sheet)
Overall Length (L)(mm)
work material
R Precision(μm)
Machining Application
Coating
Type

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare On Sale Till 31/03/2025	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare On Sale Till 31/03/2025	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
BrandNhãn hiệu	OSG	MISUMI	OSG	MISUMI	MISUMI	NS TOOL	DIJET	OSG KOREA CORP	MISUMI	NACHI(FUJIKOSHI)	OSG	OSG	OSG	OSG	NS TOOL	NS TOOL	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	OSG	OSG	OSG	OSG	OSG
Product SeriesDòng sản phẩm	Ball End Type, 2-Flute WXL-EBD	MRC Series Carbide Ball End Mill, for Heat-Treated Steel Machining, 2-Flute / Short Model	Pencil-Neck Type, 3-Flute PHX-PC-DBT	MRC Series Carbide Ball End Mill, for Heat-Treated Steel Machining, 2-Flute / Regular Model	XAL Series Carbide Ball End Mill, 2-Flute / Regular Model	MSB230 MUGEN-COATING 2-Flute Ball End Mill	One Cut Ball Long Type DZ-OCLB-S	2-Flute Ball End Mill (GS-EBD)	XAL series carbide ball end mill, 2-flute / short model	GS MILL Ball 2GSR	Ball End Type, 2-Flute WXS-EBD	Long Shank Ball Type, 2-Flute FX-LS-MG-EBD	Ball End Type, 2-Flute FX-HO-MG-EBD	Ball End Type, 2-Flute WXL-PC-EBD	MSBH345 3-Flute Ball-End Mill for High-Hardness	MSB230SF MUGEN-COATING Ball End Mill with Short Shank (for Shrink Fitting)	TSC series carbide ball end mill (R accuracy ±3μm)	TSC series carbide ball end mill (for shrink fit holder / R accuracy ±3 μm) 2-flute / stub model	TSC series carbide ball end mill, for shrinkage fitting, 2-flute / stub model	XAC series carbide ball end mill, 2-flute / short model	XAC series carbide ball end mill, 2-flute / short, long shank model	TSC Series Carbide Ball End Mill 2-Flute / Short Type	TSC series carbide ball end mill, regular model	TSC series carbide ball end mill, 2-flute / short, long shank model	TSC series carbide ball end mill, 3-flute / short model	TSC series carbide ball end mill, 3-flute / regular model	TSC Series Carbide Ball End Mill 4-Flute / Short Type	TSC series carbide ball end mill, 4-flute / regular model	TS Coated Carbide Ball End Mill, Cutting Edge Rigidity Machining / For High-Hardness Steel Machining, 2-Flute / No Side Blade	TSC Series Carbide Ball End Mill (for Shrink Fit Holder) for High-Hardness Steel Machining, 2-Flute / Stub Model	TSC Series Carbide Ball End Mill (for Shrink Fit Holder) for High-Hardness Steel Machining, 2-Flute / Stub Model	CBN Ball End Mill, 2-Flute	XCP Coated Carbide Ball End Mill For Tempered Steel / High Hardness Steel Machining / 2-Flute / Stub Type	SHC Series Carbide Ball End Mill, for High-Hardness Steel Machining, 2-Flute / Regular Model	GS MILL Long Neck Hard Ball GSBNH2	X's Mill Geo Ball Long Shank 2GEOLSR	CBN Mold Finish Master BNBP	GS MILL Hard Ball GSBH	Mold Meister Ball 2MMR	X's Mill Geo Ball 2GEOR	Short Pencil-neck Type, 2-Flute FX-PCS-EBD-6	Ball End Type, 2-Flute FX-MG-EBD-3	Ball End Type, 2-Flute CBN-EBD	Ball End Type, 2-Flute CBN-SXB	Ball End Type, 2-Flute FX-MG-EBD
From	483,333 VND	461,043 VND	2,341,749 VND	463,676 VND		569,109 VND	2,690,533 VND	752,214 VND	328,423 VND Special Price On Sale Till 31/03/2025	2,050,211 VND	553,333 VND	3,348,954 VND	3,549,214 VND	805,371 VND	1,697,886 VND	632,060 VND	1,240,084 VND	1,362,905 VND	531,732 VND	517,970 VND	996,240 VND								2,514,992 VND	1,363,947 VND	544,661 VND	3,921,372 VND	437,250 VND	715,386 VND	813,042 VND	1,962,867 VND	7,987,208 VND	1,855,065 VND	4,454,124 VND	1,680,968 VND	2,798,335 VND	2,320,897 VND	8,565,563 VND	4,580,025 VND	2,561,288 VND
Days to ShipSố ngày giao hàng	6 Day(s) or more	4 Day(s) or more	6 Day(s) or more	4 Day(s) or more	Same day or more	6 Day(s) or more	6 Day(s) or more	4 Day(s) or more	Same day or more	10 Day(s) or more	17 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	Same day or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	Same day	4 Day(s) or more	4 Day(s) or more	Same day	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more
SpecificationsĐặc điểm kĩ thuật		MR General Steel 2 Flutes S (Short)		MR General Steel 2 Flutes R (Regular)	XAL General Steel 2 Flutes				XAL General Steel 2 Flutes								TS General Steel 2 Flutes S (Short)	TS General Steel 2 Flutes B (Stub)	TS General Steel 2 Flutes B (Stub)	TiAlN General Steel 2 Flutes S (Short)	TiAlN General Steel 2 Flutes	TS General Steel 2 Flutes S (Short)	TS General Steel 2 Flutes R (Regular)	TS General Steel 2 Flutes S (Short)	TS General Steel 3 Flutes S (Short)	TS General Steel 3 Flutes R (Regular)	TS General Steel 4 Flutes S (Short)	TS General Steel 4 Flutes R (Regular)	TS High-Hardness Steel 2 Flutes	TS High-Hardness Steel 2 Flutes B (Stub)	TS High-Hardness Steel 2 Flutes B (Stub)	High-Hardness Steel 2 Flutes		SH-a High-Hardness Steel 2 Flutes R (Regular)
R Size(mm)	0.05 ～ 10	0.1 ～ 10	0.5 ～ 6	0.2 ～ 8	0.2 ～ 8	0.05 ～ 6	2 ～ 12.5	0.05 ～ 12.5	0.05 ～ 10	5	0.5 ～ 6	3	3 ～ 10	0.1 ～ 6	0.5 ～ 3	0.1 ～ 6	1.5 ～ 3	0.3 ～ 2	0.2 ～ 6	0.2 ～ 12.5	2 ～ 8	0.05 ～ 10	0.2 ～ 8	0.5 ～ 12.5	0.5 ～ 10	1 ～ 6	1 ～ 10	1.5 ～ 6	1 ～ 5	0.3 ～ 3	0.5	0.3 ～ 1	0.5 ～ 12.5	1 ～ 6	0.1 ～ 3	0.5 ～ 15	0.2 ～ 1	0.2 ～ 6	0.5 ～ 6	0.5 ～ 15	0.1 ～ 2	0.2 ～ 1.5	3 ～ 6	0.2 ～ 1.5	0.5 ～ 15
Blade length (ℓ)(mm)	0.2 ～ 38	0.4 ～ 25	1.5 ～ 18	1.5 ～ 30	1.5 ～ 48	0.1 ～ 20	12 ～ 50	0.2 ～ 50	0.2 ～ 38	15	1 ～ 18	12	12 ～ 38	0.16 ～ 12	1.5 ～ 10	0.2 ～ 12	4.5 ～ 9	0.6 ～ 4	0.4 ～ 12	0.8 ～ 50	8 ～ 30	0.2 ～ 25	1.5 ～ 30	2 ～ 30	2 ～ 25	5 ～ 22	3 ～ 25	5 ～ 22	1 ～ 5	0.6 ～ 6	1	0.5 ～ 1.2	1 ～ 25	6 ～ 22	0.2 ～ 6	1.5 ～ 45	0.3 ～ 1.4	0.4 ～ 12	1.5 ～ 18	1.5 ～ 45	0.16 ～ 3.2	0.8 ～ 8	4 ～ 7	0.3 ～ 1.8	2.5 ～ 55
Underneck length (ℓ1)(mm)	-	-	6 ～ 160.8	-	-	-	-	-	-	-	2 ～ 10	-	-	1 ～ 80	-	-	-	-	-	-	-	15 ～ 75	17 ～ 80	15 ～ 80	15 ～ 75	17 ～ 72	15 ～ 75	17 ～ 72	5 ～ 10	-	-	1.5 ～ 5	2.2 ～ 50	-	-	10 ～ 100	1.2 ～ 5.5	0.6 ～ 7.5	-	3 ～ 80	1 ～ 30	-	20	1.2 ～ 6	-
Shank diameter (d)(mm)	4 ～ 20	4 ～ 20	6 ～ 20	4 ～ 16	4 ～ 16	4 ～ 12	4 ～ 25	4 ～ 25	3 ～ 20	10	4 ～ 12	6	6 ～ 20	4 ～ 16	6	4 ～ 12	6	6	4 ～ 12	3 ～ 25	4 ～ 16	3 ～ 20	4 ～ 16	3 ～ 25	6 ～ 20	6 ～ 12	6 ～ 20	6 ～ 12	6 ～ 10	6	4	4	4 ～ 25	6 ～ 12	4 ～ 6	4 ～ 32	4 ～ 6	4 ～ 12	4 ～ 12	4 ～ 32	6	3	6 ～ 12	4 ～ 6	4 ～ 25
Number of flutes(sheet)	2	2	3	2	2	2	2	2	2	2	2	2	2	2	3	2	2	2	2	2	2	2	2	2	3	3	4	4	2	2	2	2	2	2	2	2	2	2	2	2	2	2	2	2	2
Overall Length (L)(mm)	40 ～ 160	50 ～ 150	60 ～ 220	50 ～ 140	50 ～ 140	50 ～ 110	120 ～ 220	40 ～ 180	40 ～ 160	100	50 ～ 110	140	90 ～ 160	45 ～ 160	60 ～ 80	35 ～ 60	60 ～ 90	40	40 ～ 65	40 ～ 180	100 ～ 250	40 ～ 150	50 ～ 140	70 ～ 280	50 ～ 150	50 ～ 110	50 ～ 150	60 ～ 110	50 ～ 90	40	40	50	40 ～ 180	50 ～ 110	45 ～ 120	80 ～ 230	50	50 ～ 110	50 ～ 120	50 ～ 200	50 ～ 100	40	90 ～ 110	45 ～ 50	50 ～ 180
work material	High Hardness Steel-HRC55[○]	High Hardness Steel-HRC55[◎]	High Hardness Steel-HRC55[◎]	High Hardness Steel-HRC55[◎]	High Hardness Steel-HRC55[○]	High Hardness Steel-HRC55[◎]	High Hardness Steel-HRC55[○]	High Hardness Steel-HRC55[○]	High Hardness Steel-HRC55[○]	High Hardness Steel-HRC55[◎]	High Hardness Steel-HRC55[◎]	High Hardness Steel-HRC55[◎]	High Hardness Steel-HRC55[◎]	High Hardness Steel-HRC55[○]	High Hardness Steel-HRC55[◎]	High Hardness Steel-HRC55[◎]	High Hardness Steel-HRC55[○]	High Hardness Steel-HRC55[○]	High Hardness Steel-HRC55[○]	High Hardness Steel-HRC55[○]	High Hardness Steel-HRC55[○]	High Hardness Steel-HRC55[○]	High Hardness Steel-HRC55[○]	High Hardness Steel-HRC55[○]	High Hardness Steel-HRC55[○]	High Hardness Steel-HRC55[○]	High Hardness Steel-HRC55[○]	High Hardness Steel-HRC55[○]	High Hardness Steel-HRC55[◎]	High Hardness Steel-HRC55[◎]	High Hardness Steel-HRC55[◎]	High Hardness Steel-HRC55[◎]	High Hardness Steel-HRC55[◎]	High Hardness Steel-HRC55[◎]	High Hardness Steel-HRC55[◎]	High Hardness Steel-HRC55[◎]	High Hardness Steel-HRC55[◎]	High Hardness Steel-HRC55[◎]	High Hardness Steel-HRC55[◎]	High Hardness Steel-HRC55[◎]	High Hardness Steel-HRC55[○]	High Hardness Steel-HRC55[◎]	High Hardness Steel-HRC55[◎]	High Hardness Steel-HRC55[◎]	High Hardness Steel-HRC55[◎]
R Precision(μm)	-0.007 to 0.003 ～ ±0.01	±0.005 ～ ±0.01	-	±0.005 ～ ±0.01	-0.007 ~ +0.003 ～ ±0.01	0.005～-0.005 ～ 0.01～-0.01	10～-10	-	-0.007 ~ +0.003 ～ ±0.01	-0.01～+0.01	-0.007～+0.007 ～ -0.005～+0.005	-0.01～+0.01	-0.01～+0.01	-0.005 to +0.005 ～ -0.005～+0.005	0.01～-0.01	0.005～-0.005 ～ 0.01～-0.01	-0.005 ~ +0.001 ～ ±0.003	±0.003	-0.007 ~ +0.003 ～ ±0.005	±0.01	±0.01	-0.007 ~ +0.003 ～ ±0.01	-0.007 ~ +0.003 ～ ±0.01	-0.007 ~ +0.003 ～ ±0.01	±0.01	±0.01	±0.01	±0.01	±0.01	-0.005 ~ +0.001 ～ ±0.003	±0.005	±0.005	±5 ～ ±10	±0.005	-	0～-0.04 ～ 0～-0.03	-	-	-0.003～+0.003	0～-0.04 ～ 0～-0.03	-0.005～+0.005	-0.01～+0.01	-0.01～+0.01	-0.005～+0.005	-0.01～+0.01
Machining Application	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / R Groove	Curved surface / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove
Coating	For General Steels (AlCrN, etc.)	MRC	For High Hardness (Silicon Group)	MRC	For General Steels (AlCrN, etc.)	TiAlN	TiAlN	FX	For General Steels (AlCrN, etc.)	TiAlN	For High Hardness (Silicon Group)	TiAlN	TiAlN	For General Steels (AlCrN, etc.)	For High Hardness (Silicon Group)	TiAlN	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	TiAlN	TiAlN	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	Non-Coated	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	TiAlN	TiAlN	-	TiAlN	TiAlN	TiAlN	TiAlN	TiAlN	Non-Coated	Non-Coated	TiAlN
Type	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball

Loading...Tải…