Long Neck Square End Mills (Carbide)（Torsion Angle (θ)：Standard torsion (30-40°)）

• You can add up to 6 items per a category to the compare list. Compare

  

  MHR430 MUGEN-COATING 4-Flute Long Neck End Mill (for Deep Ribbing)

  NS TOOL

  [Notice] Alterations can now be specified. Please select from "Standard/Alterations Category" of narrowing conditions.[Features]・ MUGEN coating is applied to the original deep rib end mill.・ Neck relief type suitable for narrow deep machining.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  1 ～ 10	1.5 ～ 15	4 ～ 80	4 ～ 10	4	50 ～ 150	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎]	Standard torsion (30-40°)	Plane / Side / Groove / Inclined Cuts	TiAlN	With Lead	Long-Neck Square

  From: 758,550 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Micro Grain Carbide End Mills WXL Coated 2 Flutes Long Neck Short_WXL-LN-EDS

  OSG

  [Notice] Alterations can now be specified. Please select from "Standard/Alterations Category" of narrowing conditions.[Features]・ WXL coating with excellent lubricity and abrasion resistance・ Can be used with a wide range of work materials and cutting applications. Multiple variations available.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  0.1 ～ 12	0.15 ～ 18	0.3 ～ 60	4 ～ 12	2	45 ～ 140	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[◎]	Standard torsion (30-40°)	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	For General Steels (AlCrN, etc.)	Sharp Edge / With Lead	Long-Neck Square

  From: 419,999 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MHRH430 4-Flute Long Neck End Mill for High-Hardness

  NS TOOL

  [Notice] Alterations can now be specified. Please select from "Standard/Alterations Category" of narrowing conditions.[Features]・ By adopting MUGEN Coating Premium, it has a long lifespan for machining high hardness materials. Improved machining precision.・ Increased tool rigidity during fine machining.・ Available in a total of 55 sizes.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  1 ～ 6	0.8 ～ 9	4 ～ 50	4 ～ 6	4	50 ～ 110	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[◎] / Copper[○] / Resin[○]	Standard torsion (30-40°)	Plane / Side / Groove / Inclined Cuts	For High Hardness (Silicon Group)	With Lead	Long-Neck Square

  From: 930,090 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  RSE230 End Mill for Resin Clear Cut

  NS TOOL

  [Notice] Alterations can now be specified. Please select from "Standard/Alterations Category" of narrowing conditions.[Features]・ Three × D flute length, 5 × D flute length, 10 × D flute length, super long neck, same diameter type, selectable according to the shape to be machined.・ Can also be used for non-ferrous materials such as aluminum and copper.・ Available in a total of 135 sizes.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  0.1 ～ 6	0.3 ～ 50	0.8 ～ 80	3 ～ 6	2	45 ～ 130	Aluminum[◎] / Copper[◎] / Resin[◎]	Standard torsion (30-40°)	Plane / Side / Groove / Inclined Cuts	Non-Coated	Sharp Edge	Long-Neck Square

  From: 623,404 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MHR230 MUGEN-COATING 2-Flute Long Neck End Mill (for Deep Ribbing)

  NS TOOL

  [Notice] Alterations can now be specified. Please select from "Standard/Alterations Category" of narrowing conditions.[Features]・ MUGEN coating is applied to the original deep rib end mill.・ Neck relief type suitable for narrow deep machining.・ Available in a total of 217 sizes.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  0.1 ～ 6	0.15 ～ 9	0.3 ～ 60	4 ～ 6	2	45 ～ 120	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎]	Standard torsion (30-40°)	Plane / Side / Groove / Inclined Cuts	TiAlN	With Lead	Long-Neck Square

  From: 541,765 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  XAL Coated Carbide Long Neck Square End Mill, 2-Flute / Long Neck Model

  MISUMI

  The long-awaited long-neck type joins the popular XAL Series

  • Volume Discount

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  0.1 ～ 6	0.2 ～ 9	0.3 ～ 60	4 ～ 6	2	50 ～ 100	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]	Standard torsion (30-40°)	Plane / Side / Groove / Inclined Cuts	For General Steels (AlCrN, etc.)	Sharp Edge / With Lead	Long-Neck Square

  From: 277,752 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  HLS2000 HM Coated 2-Flute Long Neck Square [Alteration Supported Product]

  UNION TOOL

  [Features]· Adopts the HARDMAX coating that realizes outstanding heat resistance and lubricity, enabling deep rib milling of high-hardness materials· High Accuracy: O.D. Tolerance: 0/-0.01 (D ≤ 0.15), 0/-0.015 (D ≥ 0.2)· The refined shape improves the fracture resistance and the synergistic effect with HARDMAX coating ensures long product life

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  0.1 ～ 6	0.1 ～ 9	0.3 ～ 60	4 ～ 6	2	45 ～ 120	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] / Copper[○]	Standard torsion (30-40°)	Plane / Side / Groove / Inclined Cuts	For High Hardness (Silicon Group)	With Lead	Long-Neck Square

  From: 497,110 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  NHR-2 Long Neck End Mill (for Deep Ribs)

  NS TOOL

  [Notice] Alterations can now be specified. Please select from "Standard/Alterations Category" of narrowing conditions.[Features]・ Neck relief type suitable for narrow and deep machining

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  0.5 ～ 2	0.7 ～ 3	2 ～ 20	3 ～ 4	2	35 ～ 55	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[◎] / Copper[◎] / Resin[◎]	Standard torsion (30-40°)	Plane / Side / Groove / Inclined Cuts	Non-Coated	With Lead	Long-Neck Square

  From: 1,011,335 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  TSC series carbide long neck square end mill, 2-flute / long neck model

  MISUMI

  [Features]·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)·Can select optimal body length for processing deep parts of workpiece·Optimal for machining in low to medium rotation range due to the general-purpose 30° helix angle·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties

  • Volume Discount

  • TS
  • General Steel
  • 2 Flutes

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  0.1 ～ 6	0.2 ～ 10	0.3 ～ 60	4 ～ 6	2	40 ～ 100	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Standard torsion (30-40°)	Plane / Side / Groove / Inclined Cuts / Countersinking	For High Hardness (Silicon Group)	Sharp Edge / With Lead	Long-Neck Square

  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Micro Grain Carbide End Mills WXL Coated 4 Flutes Long Neck Short_WXL-LN-EMS

  OSG

  [Notice] Alterations can now be specified. Please select from "Standard/Alterations Category" of narrowing conditions.[Features]・ WXL coating with excellent lubricity and abrasion resistance.・ Can be used with a wide range of work materials and cutting applications. Multiple variations available.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  1 ～ 10	1.5 ～ 15	4 ～ 80	4 ～ 10	4	45 ～ 150	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[◎]	Standard torsion (30-40°)	Plane / Side / Groove / Inclined Cuts	For General Steels (AlCrN, etc.)	With Lead	Long-Neck Square

  From: 409,412 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  C-CER UT Coat, 2-Flute Deep Rib Square [Alteration Supported Product]

  UNION TOOL

  [Features]· Ideal for deep grooving thanks to the undercut processing of the main part

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  0.2 ～ 6	0.3 ～ 9	0.5 ～ 60	4 ～ 6	2	45 ～ 120	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] / Copper[◎]	Standard torsion (30-40°)	Plane / Side / Groove / Inclined Cuts	TiCN	With Lead	Long-Neck Square

  From: 579,535 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  C-CES4000, UT Coat, 4-Flute Square [Alteration Supported Product]

  UNION TOOL

  [Features]· Supports a wide range of applications from carbon to hardened steel (up to 55 HRC)· Reasonable price, yet high quality and high performance

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  1 ～ 20	2.5 ～ 48	-	4 ～ 20	4	45 ～ 110	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] / Copper[◎]	Standard torsion (30-40°)	Plane / Side / Groove / Inclined Cuts	TiCN	With Lead	Square

  From: 488,848 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CPS 2-Flute Square for Resin Machining [Alteration Supported Product]

  UNION TOOL

  [Features]· Medium Blade Length End Mill for Resin Processing· Unique blade shape· Blade Length = 3x Outer Diameter (Some 1.5x/2x)· An excellent machined surface can be obtained, even for long resin protrusion machining

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  0.3 ～ 12	0.9 ～ 36	-	3 ～ 12	2	45 ～ 100	Aluminum[○] / Copper[◎] / Resin[◎]	Standard torsion (30-40°)	Plane / Side / Groove / Inclined Cuts	Non-Coated	With Lead	Square

  From: 563,011 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MHRH230 2-Flute Long Neck End Mill for High-Hardness

  NS TOOL

  [Notice] Alterations can now be specified. Please select from "Standard/Alterations Category" of narrowing conditions.[Features]・ By adopting MUGEN Coating Premium, it has a long lifespan for machining high hardness materials. Improved machining precision.・ Available in a total of 134 sizes.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  0.1 ～ 3	0.08 ～ 4.5	0.3 ～ 50	4 ～ 6	2	45 ～ 100	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[◎] / Copper[○] / Resin[○]	Standard torsion (30-40°)	Plane / Side / Groove / Inclined Cuts	For High Hardness (Silicon Group)	With Lead	Long-Neck Square

  From: 632,060 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  DIA Coated Series, for Graphite Processing, DCLS, 2-Flute Long Neck Square

  UNION TOOL

  [Features]· 2-Flute Diamond Coated Long Neck Square End Mill for Graphite Electrode Machining· The newly developed diamond coating film achieves outstanding wear resistance· Adopts a highly adhesive coating film for longer product life

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  0.4 ～ 6	0.8 ～ 12	2 ～ 63	4 ～ 6	2	45 ～ 120	Aluminum[○] / Copper[○] / Graphite[◎] / Resin[○]	Standard torsion (30-40°)	Plane / Side / Groove / Inclined Cuts	Dia Coat	Sharp Edge	Long-Neck Square

  From: 2,234,340 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  X Coated 2-Flute Long Neck End Mill (For deep rib) NHR-2X

  NS TOOL

  Neck relief type suitable to narrow deep processing

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  0.5 ～ 2	0.7 ～ 3	2 ～ 20	3 ～ 4	2	35 ～ 55	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Aluminum[○] / Copper[○]	Standard torsion (30-40°)	Plane / Side / Groove	TiCN	With Lead	Long-Neck Square

  From: 1,367,987 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  2-Flute Long Neck End Mill (GS-LN-EDS)

  OSG KOREA CORP

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  0.1 ～ 4	0.15 ～ 6	0.3 ～ 50	4 ～ 6	2	45 ～ 100	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○]	Standard torsion (30-40°)	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	FX	-	Long-Neck Square

  From: 569,447 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  4-Blade Pin Square Sander, EM Long

  WIDIN

  [Features]· Long four-blade pin square sander EM.· Supports flexible material and aluminum alloy.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  5 ～ 16	25 ～ 80	-	6 ～ 16	-	100 ～ 200	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○]	Standard torsion (30-40°)	Side / Groove / Plunging (Z feed)	TiAlN	Sharp Edge	High Helical

  From: 1,137,635 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  GS MILL Long Neck, 2-Flute GSN2

  NACHI(FUJIKOSHI)

  Ideal for fine machining of molds. Available in various sizes and can be used for all kinds of machining.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  0.2 ～ 6	0.3 ～ 9	0.5 ～ 60	4 ～ 6	2	45 ～ 120	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[○] / Cast Iron[○] / Titanium[○]	Standard torsion (30-40°)	Plane / Side / Groove / Inclined Cuts	TiAlN	Sharp Edge	Long-Neck Square

  From: 783,927 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  2-Flute, Long Neck Short Type for Copper / Aluminum Alloy / Plastic, CRN-LN-EDS

  OSG

  [Notice] Alterations can now be specified. Please select from "Standard/Alterations Category" of narrowing conditions.[Features]・ A short blade long neck shape with high rigidity that enables high efficiency and high precision machining even with a large protrusion. It is also ideal for high-speed and high-precision machining of copper electrodes.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  0.5 ～ 12	0.7 ～ 18	2.5 ～ 60	6 ～ 12	2	60 ～ 140	Aluminum[○] / Copper[◎] / Resin[◎]	Standard torsion (30-40°)	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	CrN	With Lead	Long-Neck Square

  From: 1,723,656 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  ULTRA FX Micro Grain Carbide End Mills TiAlN coated 4 Flutes Short with Long Neck (φ6 shank)_FX-LN-EMS-6

  OSG

  [Notice] Alterations can now be specified. Please select from "Standard/Alterations Category" of narrowing conditions.[Features]・ An end mill long neck type for high-speed machining that brings out the full performance of a high-speed, high-precision machining center.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  1 ～ 6	1.5 ～ 9	5 ～ 30	6	4	60 ～ 90	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	Standard torsion (30-40°)	Plane / Side / Groove / Inclined Cuts	TiAlN	Sharp Edge / With Lead	Long-Neck Square

  From: 1,933,753 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  ULTRA WX Micro Grain Carbide End Mills TiAIN coated 4 Flutes Long Neck Short_WX-LN-EMS

  OSG

  [Notice] Alterations can now be specified. Please select from "Standard/Alterations Category" of narrowing conditions.[Features]・ Long neck type 4-flute end mill that can machine narrow and deep parts. The bottom flute is designed to have stronger corners.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  1 ～ 10	1.5 ～ 15	4 ～ 80	4 ～ 10	4	45 ～ 150	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	Standard torsion (30-40°)	Plane / Side / Groove / Inclined Cuts	TiAlN	With Lead	Long-Neck Square

  From: 1,216,317 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  C-CES2000, UT Coat, 2-Flute Square [Alteration Supported Product]

  UNION TOOL

  [Features]· Supports a wide range of applications from carbon to hardened steel (up to 55 HRC)· Reasonable price, yet high quality and high performance

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  0.1 ～ 20	0.15 ～ 48	-	3 ～ 20	2	38 ～ 110	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] / Copper[◎]	Standard torsion (30-40°)	Plane / Side / Groove / Inclined Cuts	TiCN	With Lead	Square

  From: 315,734 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CPR 2-Flute Long Neck Square for Resin Machining [Alteration Supported Product]

  UNION TOOL

  [Features]· Long Neck End Mill for Resin Processing· Ideal for deep grooving thanks to the undercut processing of the neck part

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  0.5 ～ 6	1 ～ 12	2 ～ 63	3 ～ 6	2	38 ～ 120	Aluminum[○] / Copper[◎] / Resin[◎]	Standard torsion (30-40°)	Plane / Side / Groove / Inclined Cuts	Non-Coated	Sharp Edge / With Lead	Long-Neck Square

  From: 728,059 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  TSC series carbide long neck square end mill, 4-flute / long neck model

  MISUMI

  [Features]·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)·Can select optimal body length for processing deep parts of workpiece·Optimal for machining in low to medium rotation range due to the general-purpose 30° helix angle·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties

  • Volume Discount

  • TS
  • General Steel
  • 4 Flutes

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  1 ～ 6	1.5 ～ 9	4 ～ 50	4 ～ 6	4	50 ～ 100	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Standard torsion (30-40°)	Plane / Side / Inclined Cuts	For High Hardness (Silicon Group)	Sharp Edge / With Lead	Long-Neck Square

  From: 408,704 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CrN Coated Carbide Square End Mill for Copper Electrode Machining, 2-Flute / Long Neck Model

  MISUMI

  [Features]·Long neck shape prevents tool interference during deep cutting (body length can be selected according to machining).·Since the cutting edge has been processed into a sharp corner, it is also possible to machining corner edges·CrN coating with excellent lubricity is ideal for copper electrode processing·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  • CrN
  • Copper
  • 2 Flutes
  • B (Stub)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  0.5 ～ 3	0.7 ～ 4.5	2 ～ 40	4 ～ 6	2	50 ～ 100	Aluminum[○] / Copper[◎] / Resin[○]	Standard torsion (30-40°)	Plane / Side / Groove / Inclined Cuts	CrN	Sharp Edge	Square

  From: 1,041,780 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide Long Neck Square End Mill for Resin Machining, 2-Flute / Stub, Long Neck Model

  MISUMI

  End mill for resin that's capable of deep engraving

  • Volume Discount

  • Non-Coated
  • Resin
  • 2 Flutes
  • B (Stub)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  0.3 ～ 6	0.6 ～ 15	2.5 ～ 52	3 ～ 6	2	50 ～ 80	Aluminum[○] / Copper[○] / Graphite[○] / Resin[◎]	Standard torsion (30-40°)	Plane / Side / Groove / Inclined Cuts	Non-Coated	Sharp Edge	Long-Neck Square

  From: 635,994 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  XAL Coated Carbide Long Neck Square End Mill, 4-Flute / Long Neck Model

  MISUMI

  The price that's only achievable by XAL Series! Introducing the 4-flute long neck

  • Volume Discount

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  1 ～ 6	1.5 ～ 9	4 ～ 50	4 ～ 6	4	50 ～ 100	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]	Standard torsion (30-40°)	Plane / Side / Inclined Cuts	For General Steels (AlCrN, etc.)	Sharp Edge / With Lead	Long-Neck Square

  From: 417,671 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  GS MILL Long Neck, 4-Flute GSN4

  NACHI(FUJIKOSHI)

  Ideal for fine machining of molds. Available in various sizes and can be used for all kinds of machining.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  1 ～ 10	1.5 ～ 15	4 ～ 80	4 ～ 10	4	50 ～ 150	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[○] / Cast Iron[○] / Titanium[○]	Standard torsion (30-40°)	Plane / Side / Groove / Inclined Cuts	TiAlN	Sharp Edge	Long-Neck Square

  From: 964,909 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide End Mills DLC Coated 2 Flutes Short with Long Neck_DLC-LN-EDS

  OSG

  [Notice] Alterations can now be specified. Please select from "Standard/Alterations Category" of narrowing conditions.[Features]・ It is a short flute long neck type end mill that has its own ultra-smooth DLC coating. Powerful performance on materials that are difficult to weld, such as rolled aluminum alloys.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  0.5 ～ 6	0.7 ～ 9	2.5 ～ 30	6	2	60 ～ 90	Aluminum[◎] / Copper[○] / Resin[◎]	Standard torsion (30-40°)	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	DLC	With Lead	Long-Neck Square

  From: 1,723,263 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  ULTRA FX Micro Grain Carbide End Mills TiAlN coated 2 Flutes Short with Long Neck (φ6 shank)_FX-LN-EDS-6

  OSG

  [Notice] Alterations can now be specified. Please select from "Standard/Alterations Category" of narrowing conditions.[Features]・ An end mill long neck type for high-speed machining that brings out the full performance of a high-speed, high-precision machining center.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  0.5 ～ 2.5	0.7 ～ 3.7	2.5 ～ 12.5	6	2	60	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	Standard torsion (30-40°)	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	TiAlN	Sharp Edge / With Lead	Long-Neck Square

  From: 1,797,033 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  ULTRA WX Micro Grain Carbide End Mills TiAlN coated 2 Flutes Short with Long Neck_WX-LN-EDS

  OSG

  [Notice] Alterations can now be specified. Please select from "Standard/Alterations Category" of narrowing conditions.[Features]・ Ideal for rib and machining of fine parts where interference during machining is a problem. Please select the length of cut according to the machining application.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  0.1 ～ 6	0.15 ～ 9	0.3 ～ 60	4 ～ 6	2	45 ～ 120	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	Standard torsion (30-40°)	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	TiAlN	Sharp Edge / With Lead	Long-Neck Square

  From: 935,991 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Micro Grain Carbide End Mills DG Coated 4 Flutes Long Neck Short_DG-LN-EMS

  OSG

  [Features]・ Uses a dedicated graphite-only DG coating with excellent abrasion resistance.・ DG coating realizes low resistance with sharp cutting edge with little roundness. Controls chipping of the workpiece・ Seamless shape that improves the quality of shape machining・ An end mill with a diamond coating dedicated for graphite.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  1 ～ 6	2 ～ 12	5 ～ 60	4 ～ 6	4	50 ～ 100	Aluminum[○] / Graphite[◎]	Standard torsion (30-40°)	Plane / Side / Groove / Inclined Cuts	DG	With Lead	Long-Neck Square

  From: 3,617,869 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  HLS4000 HM Coated 4-Flute Long Neck Square

  UNION TOOL

  [Features]· Unequal division· θ1 > θ2: Variable split suppresses chatter vibration and tool damage· θ1 + θ2 = 180°: Easy to measure the outer diameter. 180° counter blade design.· Circumference back taper: Cutting resistance is reduced by using a back taper, and vertical wall cutting is also stable.· Adopts the newly developed HARDMAX coating for high-hardness materials that realizes outstanding heat resistance and lubricity· The 4-flute blade with improved chip discharge performance achieves top-level high feed and machining accuracy

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  1 ～ 6	1 ～ 6	4 ～ 50	4 ～ 6	4	50 ～ 110	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] / Copper[○]	Standard torsion (30-40°)	Plane / Side / Groove / Inclined Cuts	For High Hardness (Silicon Group)	With Lead	Long-Neck Square

  From: 695,010 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  C-CES2000S UT Coat 2-Flutes Square (Sharp Corner) [Alteration Supported Product]

  UNION TOOL

  [Features]· C-CES: 2-flute sharp corner type· Supports a wide range of applications from carbon to hardened steel (up to 55 HRC)· Reasonable price, yet high quality and high performance

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  0.2 ～ 12	0.3 ～ 36	-	4 ～ 12	2	45 ～ 90	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] / Copper[◎]	Standard torsion (30-40°)	Plane / Side / Groove / Inclined Cuts	TiCN	Sharp Edge	Square

  From: 315,734 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  C-CES4000S UT Coated 4-Flute Square End Mill (Sharp Corner) [Alteration Supported Product]

  UNION TOOL

  [Features]· C-CES: 4-flute sharp corner type· Supports a wide range of applications from carbon to hardened steel (up to 55 HRC)· Reasonable price, yet high quality and high performance

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  1 ～ 12	2.5 ～ 26	-	4 ～ 12	4	45 ～ 75	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] / Copper[◎]	Standard torsion (30-40°)	Plane / Side / Groove / Inclined Cuts	TiCN	Sharp Edge	Square

  From: 488,848 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CPRL 2-Flute Long Neck, Long Shank Square for Resin Machining [Alteration Supported Product]

  UNION TOOL

  [Features]· Long Neck / Long Shank Square End Mill for Resin Processing· Adopts a long shank to support deep groove machining of objects with long projections· Exhibits excellent sharpness in resin processing

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  0.5 ～ 4	1 ～ 8	4 ～ 40	4 ～ 6	2	80 ～ 100	Aluminum[○] / Copper[◎] / Resin[◎]	Standard torsion (30-40°)	Plane / Side / Groove / Inclined Cuts	Non-Coated	Sharp Edge / With Lead	Long-Neck Square

  From: 859,861 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  DIA Coated Series, for Graphite Processing, DCES2000, 2-Flute Square

  UNION TOOL

  [Features]· 2-Flute Diamond Coated End Mill for Graphite Electrode Machining· The newly developed diamond coating film achieves outstanding wear resistance· Adopts a highly adhesive coating film for longer product life

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  0.2 ～ 6	0.6 ～ 18	-	4 ～ 6	4	45 ～ 60	Aluminum[○] / Copper[○] / Graphite[◎] / Resin[○]	Standard torsion (30-40°)	Plane / Side / Groove / Inclined Cuts	Dia Coat	Sharp Edge	Square

  From: 2,028,178 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  DIA Coated Series DCES4000 4-Flute Square for Cutting Graphite

  UNION TOOL

  [Features]· 4-Flute Diamond Coated End Mill for Graphite Electrode Machining· The newly developed diamond coating film achieves outstanding wear resistance· Adopts a highly adhesive coating film for longer product life

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  3 ～ 10	9 ～ 30	-	6 ～ 10	4	50 ～ 90	Aluminum[○] / Copper[○] / Graphite[◎] / Resin[○]	Standard torsion (30-40°)	Plane / Side / Groove / Inclined Cuts	Dia Coat	Sharp Edge	Square

  From: 2,784,762 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CXS UT Coat 4-Flute Long Neck Square Unequal Split/Unequal Lead

  UNION TOOL

  [Features]· Variable split and unequal lead effectively suppress chatter vibration· Adopts a high-toughness type resistant to chipping with carbides, then further fine-tunes the special ridge shape to enable ultra-high-performance deep cutting like never before· Provides excellent finished surfaces in both heavy cutting and finishing· Adopts a low friction coating to realize outstanding chip discharge performance and abrasion resistance

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  1 ～ 12	1.5 ～ 18	3 ～ 36	4 ～ 12	4	50 ～ 90	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Cast Iron[○] / Titanium[○] / Copper[◎]	Standard torsion (30-40°)	Plane / Side / Groove / Inclined Cuts	-	With Lead	Long-Neck Square

  From: 873,631 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Diamond Coating, 2-Blade, Long-Neck End Mill DCHR230

  NS TOOL

  [Features]・ By adopting a unique diamond coating, it has high durability against machining of graphite and high silicone aluminum alloy.・ Neck relief type suitable for narrow and deep machining

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  0.5 ～ 6	1 ～ 12	2 ～ 40	4 ～ 6	2	45 ～ 90	Aluminum[○] / Resin[○]	Standard torsion (30-40°)	Plane / Side / Groove	Dia Coat	With Lead	Long-Neck Square

  From: 3,287,380 VND
  Days to Ship: Số ngày giao hàng: 12 Day(s)

  12 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  BED2L Brazed Long Square End Mill, 2-Flute, Non-Coated

  OKAZAKI SEIKO

  The ultra fine particle insert (Z-10) enables a wide range of machining from cast iron to steel.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  20 ～ 50	55 ～ 125	-	20 ～ 42	2	140 ～ 240	general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○]	Standard torsion (30-40°)	Plane / Groove	Non-Coated	C plane	Long-Neck Square

  From: 8,082,026 VND
  Days to Ship: Số ngày giao hàng: 10 Day(s) or more

  10 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  BPD4L Brazed Long Square End Mill, 4-Flute, Non-Coated

  OKAZAKI SEIKO

  The ultra fine particle insert (Z-10) enables a wide range of machining from cast iron to steel.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  20 ～ 50	55 ～ 125	-	20 ～ 42	4	140 ～ 240	general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○]	Standard torsion (30-40°)	Plane / Side	Non-Coated	C plane	Long-Neck Square

  From: 8,172,865 VND
  Days to Ship: Số ngày giao hàng: 10 Day(s) or more

  10 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  BPD4U Brazed Extra-Long Square End Mill, 4-Flute, Non-Coated

  OKAZAKI SEIKO

  The ultra fine particle insert (Z-10) enables a wide range of machining from cast iron to steel.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  20 ～ 50	85 ～ 150	-	25 ～ 42	4	185 ～ 265	general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○]	Standard torsion (30-40°)	Plane / Side	Non-Coated	C plane	Long-Neck Square

  From: 11,240,641 VND
  Days to Ship: Số ngày giao hàng: 10 Day(s) or more

  10 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SED2L Long Square End Mill, 2-Flute, Non-Coated

  OKAZAKI SEIKO

  SED2L, Long Square End Mill, 2-Flute, Uncoated·The long type allows deep cavity milling.·Sharp helix angle (45 to 60°)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  3 ～ 20	15 ～ 80	-	6 ～ 20	2	70 ～ 150	general steel[◎] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Standard torsion (30-40°)	Plane / Side / Groove	Non-Coated	Sharp Edge	Long-Neck Square

  From: 1,224,545 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

BrandNhãn hiệu
Product SeriesDòng sản phẩm
From
Days to ShipSố ngày giao hàng
SpecificationsĐặc điểm kĩ thuật
Blade diameter (D)(φ)
Blade length (ℓ)(mm)
Underneck length (ℓ1)(mm)
Shank diameter (d)(mm)
Number of flutes(sheet)
Overall Length (L)(mm)
work material
Torsion Angle (θ)
Machining Application
Coating
Blade tip shape
Type

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
BrandNhãn hiệu	NS TOOL	OSG	NS TOOL	NS TOOL	NS TOOL	MISUMI	UNION TOOL	NS TOOL	MISUMI	OSG	UNION TOOL	UNION TOOL	UNION TOOL	NS TOOL	UNION TOOL	NS TOOL	OSG KOREA CORP	WIDIN	NACHI(FUJIKOSHI)	OSG	OSG	OSG	UNION TOOL	UNION TOOL	MISUMI	MISUMI	MISUMI	MISUMI	NACHI(FUJIKOSHI)	OSG	OSG	OSG	OSG	UNION TOOL	UNION TOOL	UNION TOOL	UNION TOOL	UNION TOOL	UNION TOOL	UNION TOOL	NS TOOL	OKAZAKI SEIKO	OKAZAKI SEIKO	OKAZAKI SEIKO	OKAZAKI SEIKO
Product SeriesDòng sản phẩm	MHR430 MUGEN-COATING 4-Flute Long Neck End Mill (for Deep Ribbing)	Micro Grain Carbide End Mills WXL Coated 2 Flutes Long Neck Short_WXL-LN-EDS	MHRH430 4-Flute Long Neck End Mill for High-Hardness	RSE230 End Mill for Resin Clear Cut	MHR230 MUGEN-COATING 2-Flute Long Neck End Mill (for Deep Ribbing)	XAL Coated Carbide Long Neck Square End Mill, 2-Flute / Long Neck Model	HLS2000 HM Coated 2-Flute Long Neck Square [Alteration Supported Product]	NHR-2 Long Neck End Mill (for Deep Ribs)	TSC series carbide long neck square end mill, 2-flute / long neck model	Micro Grain Carbide End Mills WXL Coated 4 Flutes Long Neck Short_WXL-LN-EMS	C-CER UT Coat, 2-Flute Deep Rib Square [Alteration Supported Product]	C-CES4000, UT Coat, 4-Flute Square [Alteration Supported Product]	CPS 2-Flute Square for Resin Machining [Alteration Supported Product]	MHRH230 2-Flute Long Neck End Mill for High-Hardness	DIA Coated Series, for Graphite Processing, DCLS, 2-Flute Long Neck Square	X Coated 2-Flute Long Neck End Mill (For deep rib) NHR-2X	2-Flute Long Neck End Mill (GS-LN-EDS)	4-Blade Pin Square Sander, EM Long	GS MILL Long Neck, 2-Flute GSN2	2-Flute, Long Neck Short Type for Copper / Aluminum Alloy / Plastic, CRN-LN-EDS	ULTRA FX Micro Grain Carbide End Mills TiAlN coated 4 Flutes Short with Long Neck (φ6 shank)_FX-LN-EMS-6	ULTRA WX Micro Grain Carbide End Mills TiAIN coated 4 Flutes Long Neck Short_WX-LN-EMS	C-CES2000, UT Coat, 2-Flute Square [Alteration Supported Product]	CPR 2-Flute Long Neck Square for Resin Machining [Alteration Supported Product]	TSC series carbide long neck square end mill, 4-flute / long neck model	CrN Coated Carbide Square End Mill for Copper Electrode Machining, 2-Flute / Long Neck Model	Carbide Long Neck Square End Mill for Resin Machining, 2-Flute / Stub, Long Neck Model	XAL Coated Carbide Long Neck Square End Mill, 4-Flute / Long Neck Model	GS MILL Long Neck, 4-Flute GSN4	Carbide End Mills DLC Coated 2 Flutes Short with Long Neck_DLC-LN-EDS	ULTRA FX Micro Grain Carbide End Mills TiAlN coated 2 Flutes Short with Long Neck (φ6 shank)_FX-LN-EDS-6	ULTRA WX Micro Grain Carbide End Mills TiAlN coated 2 Flutes Short with Long Neck_WX-LN-EDS	Micro Grain Carbide End Mills DG Coated 4 Flutes Long Neck Short_DG-LN-EMS	HLS4000 HM Coated 4-Flute Long Neck Square	C-CES2000S UT Coat 2-Flutes Square (Sharp Corner) [Alteration Supported Product]	C-CES4000S UT Coated 4-Flute Square End Mill (Sharp Corner) [Alteration Supported Product]	CPRL 2-Flute Long Neck, Long Shank Square for Resin Machining [Alteration Supported Product]	DIA Coated Series, for Graphite Processing, DCES2000, 2-Flute Square	DIA Coated Series DCES4000 4-Flute Square for Cutting Graphite	CXS UT Coat 4-Flute Long Neck Square Unequal Split/Unequal Lead	Diamond Coating, 2-Blade, Long-Neck End Mill DCHR230	BED2L Brazed Long Square End Mill, 2-Flute, Non-Coated	BPD4L Brazed Long Square End Mill, 4-Flute, Non-Coated	BPD4U Brazed Extra-Long Square End Mill, 4-Flute, Non-Coated	SED2L Long Square End Mill, 2-Flute, Non-Coated
From	758,550 VND	419,999 VND	930,090 VND	623,404 VND	541,765 VND	277,752 VND	497,110 VND	1,011,335 VND		409,412 VND	579,535 VND	488,848 VND	563,011 VND	632,060 VND	2,234,340 VND	1,367,987 VND	569,447 VND	1,137,635 VND	783,927 VND	1,723,656 VND	1,933,753 VND	1,216,317 VND	315,734 VND	728,059 VND	408,704 VND	1,041,780 VND	635,994 VND	417,671 VND	964,909 VND	1,723,263 VND	1,797,033 VND	935,991 VND	3,617,869 VND	695,010 VND	315,734 VND	488,848 VND	859,861 VND	2,028,178 VND	2,784,762 VND	873,631 VND	3,287,380 VND	8,082,026 VND	8,172,865 VND	11,240,641 VND	1,224,545 VND
Days to ShipSố ngày giao hàng	Same day or more	6 Day(s) or more	8 Day(s) or more	Same day or more	6 Day(s) or more	Same day or more	6 Day(s) or more	6 Day(s) or more	4 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	8 Day(s) or more	6 Day(s) or more	6 Day(s) or more	4 Day(s) or more	8 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	Same day or more	7 Day(s) or more	7 Day(s) or more	6 Day(s) or more	7 Day(s) or more	6 Day(s) or more	7 Day(s) or more	12 Day(s)	10 Day(s) or more	10 Day(s) or more	10 Day(s) or more	6 Day(s) or more
SpecificationsĐặc điểm kĩ thuật									TS General Steel 2 Flutes																TS General Steel 4 Flutes	CrN Copper 2 Flutes B (Stub)	Non-Coated Resin 2 Flutes B (Stub)
Blade diameter (D)(φ)	1 ～ 10	0.1 ～ 12	1 ～ 6	0.1 ～ 6	0.1 ～ 6	0.1 ～ 6	0.1 ～ 6	0.5 ～ 2	0.1 ～ 6	1 ～ 10	0.2 ～ 6	1 ～ 20	0.3 ～ 12	0.1 ～ 3	0.4 ～ 6	0.5 ～ 2	0.1 ～ 4	5 ～ 16	0.2 ～ 6	0.5 ～ 12	1 ～ 6	1 ～ 10	0.1 ～ 20	0.5 ～ 6	1 ～ 6	0.5 ～ 3	0.3 ～ 6	1 ～ 6	1 ～ 10	0.5 ～ 6	0.5 ～ 2.5	0.1 ～ 6	1 ～ 6	1 ～ 6	0.2 ～ 12	1 ～ 12	0.5 ～ 4	0.2 ～ 6	3 ～ 10	1 ～ 12	0.5 ～ 6	20 ～ 50	20 ～ 50	20 ～ 50	3 ～ 20
Blade length (ℓ)(mm)	1.5 ～ 15	0.15 ～ 18	0.8 ～ 9	0.3 ～ 50	0.15 ～ 9	0.2 ～ 9	0.1 ～ 9	0.7 ～ 3	0.2 ～ 10	1.5 ～ 15	0.3 ～ 9	2.5 ～ 48	0.9 ～ 36	0.08 ～ 4.5	0.8 ～ 12	0.7 ～ 3	0.15 ～ 6	25 ～ 80	0.3 ～ 9	0.7 ～ 18	1.5 ～ 9	1.5 ～ 15	0.15 ～ 48	1 ～ 12	1.5 ～ 9	0.7 ～ 4.5	0.6 ～ 15	1.5 ～ 9	1.5 ～ 15	0.7 ～ 9	0.7 ～ 3.7	0.15 ～ 9	2 ～ 12	1 ～ 6	0.3 ～ 36	2.5 ～ 26	1 ～ 8	0.6 ～ 18	9 ～ 30	1.5 ～ 18	1 ～ 12	55 ～ 125	55 ～ 125	85 ～ 150	15 ～ 80
Underneck length (ℓ1)(mm)	4 ～ 80	0.3 ～ 60	4 ～ 50	0.8 ～ 80	0.3 ～ 60	0.3 ～ 60	0.3 ～ 60	2 ～ 20	0.3 ～ 60	4 ～ 80	0.5 ～ 60	-	-	0.3 ～ 50	2 ～ 63	2 ～ 20	0.3 ～ 50	-	0.5 ～ 60	2.5 ～ 60	5 ～ 30	4 ～ 80	-	2 ～ 63	4 ～ 50	2 ～ 40	2.5 ～ 52	4 ～ 50	4 ～ 80	2.5 ～ 30	2.5 ～ 12.5	0.3 ～ 60	5 ～ 60	4 ～ 50	-	-	4 ～ 40	-	-	3 ～ 36	2 ～ 40	-	-	-	-
Shank diameter (d)(mm)	4 ～ 10	4 ～ 12	4 ～ 6	3 ～ 6	4 ～ 6	4 ～ 6	4 ～ 6	3 ～ 4	4 ～ 6	4 ～ 10	4 ～ 6	4 ～ 20	3 ～ 12	4 ～ 6	4 ～ 6	3 ～ 4	4 ～ 6	6 ～ 16	4 ～ 6	6 ～ 12	6	4 ～ 10	3 ～ 20	3 ～ 6	4 ～ 6	4 ～ 6	3 ～ 6	4 ～ 6	4 ～ 10	6	6	4 ～ 6	4 ～ 6	4 ～ 6	4 ～ 12	4 ～ 12	4 ～ 6	4 ～ 6	6 ～ 10	4 ～ 12	4 ～ 6	20 ～ 42	20 ～ 42	25 ～ 42	6 ～ 20
Number of flutes(sheet)	4	2	4	2	2	2	2	2	2	4	2	4	2	2	2	2	2	-	2	2	4	4	2	2	4	2	2	4	4	2	2	2	4	4	2	4	2	4	4	4	2	2	4	4	2
Overall Length (L)(mm)	50 ～ 150	45 ～ 140	50 ～ 110	45 ～ 130	45 ～ 120	50 ～ 100	45 ～ 120	35 ～ 55	40 ～ 100	45 ～ 150	45 ～ 120	45 ～ 110	45 ～ 100	45 ～ 100	45 ～ 120	35 ～ 55	45 ～ 100	100 ～ 200	45 ～ 120	60 ～ 140	60 ～ 90	45 ～ 150	38 ～ 110	38 ～ 120	50 ～ 100	50 ～ 100	50 ～ 80	50 ～ 100	50 ～ 150	60 ～ 90	60	45 ～ 120	50 ～ 100	50 ～ 110	45 ～ 90	45 ～ 75	80 ～ 100	45 ～ 60	50 ～ 90	50 ～ 90	45 ～ 90	140 ～ 240	140 ～ 240	185 ～ 265	70 ～ 150
work material	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[◎] / Copper[○] / Resin[○]	Aluminum[◎] / Copper[◎] / Resin[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[◎] / Copper[◎] / Resin[◎]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] / Copper[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] / Copper[◎]	Aluminum[○] / Copper[◎] / Resin[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[◎] / Copper[○] / Resin[○]	Aluminum[○] / Copper[○] / Graphite[◎] / Resin[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○]	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○]	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[○] / Cast Iron[○] / Titanium[○]	Aluminum[○] / Copper[◎] / Resin[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] / Copper[◎]	Aluminum[○] / Copper[◎] / Resin[◎]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Aluminum[○] / Copper[◎] / Resin[○]	Aluminum[○] / Copper[○] / Graphite[○] / Resin[◎]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[○] / Cast Iron[○] / Titanium[○]	Aluminum[◎] / Copper[○] / Resin[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	Aluminum[○] / Graphite[◎]	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] / Copper[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] / Copper[◎]	Aluminum[○] / Copper[◎] / Resin[◎]	Aluminum[○] / Copper[○] / Graphite[◎] / Resin[○]	Aluminum[○] / Copper[○] / Graphite[◎] / Resin[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Cast Iron[○] / Titanium[○] / Copper[◎]	Aluminum[○] / Resin[○]	general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○]	general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○]	general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○]	general steel[◎] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]
Torsion Angle (θ)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)
Machining Application	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts / Countersinking	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	Side / Groove / Plunging (Z feed)	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove	Plane / Groove	Plane / Side	Plane / Side	Plane / Side / Groove
Coating	TiAlN	For General Steels (AlCrN, etc.)	For High Hardness (Silicon Group)	Non-Coated	TiAlN	For General Steels (AlCrN, etc.)	For High Hardness (Silicon Group)	Non-Coated	For High Hardness (Silicon Group)	For General Steels (AlCrN, etc.)	TiCN	TiCN	Non-Coated	For High Hardness (Silicon Group)	Dia Coat	TiCN	FX	TiAlN	TiAlN	CrN	TiAlN	TiAlN	TiCN	Non-Coated	For High Hardness (Silicon Group)	CrN	Non-Coated	For General Steels (AlCrN, etc.)	TiAlN	DLC	TiAlN	TiAlN	DG	For High Hardness (Silicon Group)	TiCN	TiCN	Non-Coated	Dia Coat	Dia Coat	-	Dia Coat	Non-Coated	Non-Coated	Non-Coated	Non-Coated
Blade tip shape	With Lead	Sharp Edge / With Lead	With Lead	Sharp Edge	With Lead	Sharp Edge / With Lead	With Lead	With Lead	Sharp Edge / With Lead	With Lead	With Lead	With Lead	With Lead	With Lead	Sharp Edge	With Lead	-	Sharp Edge	Sharp Edge	With Lead	Sharp Edge / With Lead	With Lead	With Lead	Sharp Edge / With Lead	Sharp Edge / With Lead	Sharp Edge	Sharp Edge	Sharp Edge / With Lead	Sharp Edge	With Lead	Sharp Edge / With Lead	Sharp Edge / With Lead	With Lead	With Lead	Sharp Edge	Sharp Edge	Sharp Edge / With Lead	Sharp Edge	Sharp Edge	With Lead	With Lead	C plane	C plane	C plane	Sharp Edge
Type	Long-Neck Square	Long-Neck Square	Long-Neck Square	Long-Neck Square	Long-Neck Square	Long-Neck Square	Long-Neck Square	Long-Neck Square	Long-Neck Square	Long-Neck Square	Long-Neck Square	Square	Square	Long-Neck Square	Long-Neck Square	Long-Neck Square	Long-Neck Square	High Helical	Long-Neck Square	Long-Neck Square	Long-Neck Square	Long-Neck Square	Square	Long-Neck Square	Long-Neck Square	Square	Long-Neck Square	Long-Neck Square	Long-Neck Square	Long-Neck Square	Long-Neck Square	Long-Neck Square	Long-Neck Square	Long-Neck Square	Square	Square	Long-Neck Square	Square	Square	Long-Neck Square	Long-Neck Square	Long-Neck Square	Long-Neck Square	Long-Neck Square	Long-Neck Square

Loading...Tải…