(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.
Tel: 0222-361-1555
Email: cs@misumi.com.vn
8:00 - 17:00 (Mon - Sat)
Search by Category / Brand Tìm theo danh mục, nhãn hiệu
Search by Category Tìm theo danh mục
- Thể lệ và Giải thưởng cuộc thi "Thiết kế máy Tự động hóa 2025" do MISUMI Việt Nam tổ chức. Xem chi tiết.
- [Thông báo] Cập nhật địa chỉ kho tập kết hàng hóa tại khu vực miền Nam của MISUMI Việt Nam. Xem chi tiết.
[Announcement] Update on warehouse address in the Southern region of MISUIMI Vietnam. See more.
Square End Mills (Carbide)（work material：High Hardness Steel-HRC55）
Brand |
|
|---|---|
Filter By |
|
| CAD |
|
| Days to Ship |
|
185 itemsMặt hàng
- Sort By
-
You can add up to 6 items per a category to the compare list.
- On Sale Till 31/03/2025
Micro Grain Carbide End Mills WXL Coated 4 Flutes Short_WXL-EMS
OSG
[Notice] Alterations can now be specified. Please select from "Standard/Alterations Category" of narrowing conditions.[Features]・ By applying a rigid lubricating film WXL coating, it is also effective for a wide range of cutting such as general steel, hardened steel and copper alloys.・ Recommended for both wet and dry processing.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 1 ～ 30 2.5 ～ 45 - 4 ～ 32 4 40 ～ 125 High Hardness Steel-HRC55[○] Standard torsion (30-40°) Plane / Side / Groove / Inclined Cuts For General Steels (AlCrN, etc.) Sharp Edge / With Lead Square From: 428,333 VND Special Price Days to Ship: Số ngày giao hàng: Same day or more 
Same day or more
-
You can add up to 6 items per a category to the compare list.
NACHI(FUJIKOSHI)
Supports a wide range of materials from raw materials to hardened materials. Suitable for finishing grooves and side surfaces.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 1 ～ 18 2.5 ～ 32 - 3 ～ 20 4 38 ～ 100 High Hardness Steel-HRC55[◎] Standard torsion (30-40°) Plane / Side / Groove / Inclined Cuts TiAlN Sharp Edge Square From: 540,666 VND Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
Micro Grain Carbide End Mills WXL Coated 2 Flutes (2D Type)_WXL-2D-DE
OSG
[Features]· 2-flute end mill coated with WXL hard lubricating film coating. Proven cutting performance on not only steel but also copper alloys. Recommended for both wet-type and dry-type milling.
- Volume Discount
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 0.1 ～ 30 0.2 ～ 60 - 4 ～ 32 2 45 ～ 140 High Hardness Steel-HRC55[○] Standard torsion (30-40°) Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts For General Steels (AlCrN, etc.) Sharp Edge Square From: 285,000 VND Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
4-Flute Short Square End Mill (GS-EMS)
OSG KOREA CORP
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 1 ～ 25 2.5 ～ 45 - 6 ～ 25 4 40 ～ 120 High Hardness Steel-HRC55[○] Standard torsion (30-40°) Plane / Side / Groove / Inclined Cuts FX - Square From: 572,324 VND Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
ULTRA FX Micro Grain Carbide End Mills TiAlN coated 4 Flutes Short_FX-MG-EMS
OSG
[Notice] Alterations can now be specified. Please select from "Standard/Alterations Category" of narrowing conditions.[Features]・ A general-purpose 4-flute end mill with FX coating that has excellent heat resistance. Supports high speed and high feed machining.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 2 ～ 30 6 ～ 45 - 4 ～ 32 4 40 ～ 125 High Hardness Steel-HRC55[○] Standard torsion (30-40°) Plane / Side / Groove / Inclined Cuts For General Steels (AlCrN, etc.) Sharp Edge Square From: 1,920,376 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
- On Sale Till 31/03/2025
Micro Grain Carbide End Mills WXL Coated 2 Flutes (4D Type)_WXL-4D-DE
OSG
[Notice] Alterations can now be specified. Please select from "Standard/Alterations Category" of narrowing conditions.[Features]・ A 2-flute end mill with a rigid lubricating film WXL coating. Effective for cutting not only steel but also copper alloys. A 4D flute length type that is recommended for both wet and dry machining.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 0.2 ～ 12 0.8 ～ 48 - 4 ～ 12 2 45 ～ 100 High Hardness Steel-HRC55[○] Standard torsion (30-40°) Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts For General Steels (AlCrN, etc.) With Lead Square From: 483,333 VND Special Price Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
MUGEN-COATING 2-Flute End Mill MSE230
NS TOOL
[Notice] Alterations can now be specified. Please select from "Standard/Alterations Category" of narrowing conditions.[Features]・ MUGEN Coating is used for the 2-flute end mill.・ Capable of universal cutting, from roughing to finishing.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 0.1 ～ 12 0.15 ～ 30 - 4 ～ 12 2 45 ～ 80 High Hardness Steel-HRC55[◎] Standard torsion (30-40°) Plane / Side / Groove / Inclined Cuts TiAlN With Lead Square From: 379,275 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
YG 1
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 1 ～ 16 2.5 ～ 40 - 6 ～ 16 4 50 ～ 100 High Hardness Steel-HRC55[○] Standard torsion (30-40°) Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts AlTiN - Long-Neck Square From: 541,798 VND Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
GSX MILL 3-Flute Blade 1.5D GSX3C-1.5D
NACHI(FUJIKOSHI)
Supports wet processing of raw materials through high-speed dry processing of high hardness materials.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 1 ～ 20 1.5 ～ 30 - 4 ～ 20 3 40 ～ 100 High Hardness Steel-HRC55[◎] Standard torsion (30-40°) Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts For General Steels (AlCrN, etc.) With Lead Square From: 589,568 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
GSX MILL 4-Flute Blade 4D GSX4C-4D
NACHI(FUJIKOSHI)
Supports wet processing of raw materials through dry processing of high hardness materials.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 1 ～ 20 4 ～ 80 - 4 ～ 20 4 40 ～ 140 High Hardness Steel-HRC55[◎] Standard torsion (30-40°) Plane / Side / Groove / Inclined Cuts TiAlN With Lead Square From: 840,386 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
ULTRA FX Micro Grain Carbide End Mills TiAlN coated 2 Flutes Short_FX-MG-EDS
OSG
[Notice] Alterations can now be specified. Please select from "Standard/Alterations Category" of narrowing conditions.[Features]・ A general-purpose 2-flute end mill with FX coating that has excellent heat resistance.・ Supports a wide range of machining.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 0.2 ～ 30 0.4 ～ 45 - 3 ～ 32 2 40 ～ 125 High Hardness Steel-HRC55[○] Standard torsion (30-40°) Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts TiAlN Sharp Edge Square From: 1,429,954 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
![CZS, UT Coat, 4-Flute Square [Alteration Supported Product]](//vn.misumi-ec.com/linked/material/fs/UNO1/PHOTO/223000571987.jpg?$product_view_b$)
CZS, UT Coat, 4-Flute Square [Alteration Supported Product]
UNION TOOL
[Features]· With the newly developed bottom blade shape, Z cuts can be processed on solid workpieces· Uses Chip-Resistant, High-Toughness Carbide Material· Adopts a low friction coating to realize outstanding chip discharge performance and abrasion resistance
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 1 ～ 20 1.5 ～ 40 - 4 ～ 20 4 50 ～ 125 High Hardness Steel-HRC55[○] Standard torsion (30-40°) Plane / Side / Groove / Inclined Cuts - With Lead Square From: 901,172 VND Days to Ship: Số ngày giao hàng: 5 Day(s) or more
5 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
2-Flute Short Square End Mill (GS-EDS)
OSG KOREA CORP
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 0.1 ～ 25 0.2 ～ 45 - 4 ～ 25 2 40 ～ 120 High Hardness Steel-HRC55[○] Standard torsion (30-40°) Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts FX - Square From: 415,957 VND Days to Ship: Số ngày giao hàng: 5 Day(s) or more
5 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
GSX MILL 4-Flute Blade 2.5D GSX4C-2.5D
NACHI(FUJIKOSHI)
Supports wet processing of raw materials through high-speed dry processing of high hardness materials.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 1 ～ 20 2.5 ～ 50 - 4 ～ 20 4 40 ～ 100 High Hardness Steel-HRC55[◎] Standard torsion (30-40°) Plane / Side / Groove / Inclined Cuts For General Steels (AlCrN, etc.) With Lead Square From: 589,568 VND Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
MHDH445 4-Flute Square-End Mill for High-Hardness
NS TOOL
[Notice] Alterations can now be specified. Please select from "Standard/Alterations Category" of narrowing conditions.[Features]・ The MUGEN Coating Premium for high hardness and the unique new shape give the tool excellent chipping resistance, and reduced chattering improves the finished surface.・ Achieves stable and long lifespan even during long-time machining in the high hardness region (48 to 65 HRC).・ Pursue the shape of the flute and improve the amount of tilt and machining precision.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 1 ～ 4 2 ～ 8 - 6 4 60 High Hardness Steel-HRC55[◎] Powerful Torsion (45°-60°) Plane / Side / Groove / Inclined Cuts For High Hardness (Silicon Group) With Lead Square From: 1,174,022 VND Days to Ship: Số ngày giao hàng: 9 Day(s)
9 Day(s)
-
You can add up to 6 items per a category to the compare list.
- On Sale Till 31/03/2025
VAC Series Carbide 2-Flute Square End Mill (Extra-Long Model)
MISUMI
[Features]·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)·Effective for processing deep parts due to extra long blade length·Ultra-fine particle cemented carbide base material and coating with excellent adhesion and heat resistance are adopted·Can process heat-treated steel up to 50HRC·Optimal for machining in low to medium rotation range due to the general-purpose 30° helix angle·Coating with excellent lubricity provides stable abrasion resistance and improves shape accuracy of workpiece (VAC coating has weak electrical conductivity. Please be careful when using an electrical tool setter.)·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.
- Volume Discount
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 1 ～ 20 4 ～ 80 - 6 ～ 20 2 60 ～ 200 High Hardness Steel-HRC55[○] - Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking - - Square From: 680,058 VND Special Price Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
GSX MILL 4-Flute Blade 3D GSX4C-3D
NACHI(FUJIKOSHI)
Supports wet processing of raw materials through dry processing of high hardness materials.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 1 ～ 20 3 ～ 60 - 4 ～ 20 4 40 ～ 120 High Hardness Steel-HRC55[◎] Standard torsion (30-40°) Plane / Side / Groove / Inclined Cuts TiAlN With Lead Square From: 589,568 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
GSX MILL 4-Flute Blade 2D GSX4C-2D
NACHI(FUJIKOSHI)
[Specifications]· Shape: Square end mill (carbide)· Coating: For General Steels (AlCrN, etc.)· Work Material: General Steel [◎] / Tempered Steel [◎] / High Hardness Steel to HRC55 [◎] / High Hardness Steel to HRC60 [○] / Stainless Steel [◎] / Casting [○] / Titanium [◎][Applications] Flat surfaces / side surfaces / grooves / inclined cutting
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 1 ～ 20 2 ～ 40 - 4 ～ 20 4 40 ～ 100 High Hardness Steel-HRC55[◎] Standard torsion (30-40°) Plane / Side / Groove / Inclined Cuts For General Steels (AlCrN, etc.) With Lead Square From: 589,568 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Micro Grain Carbide End Mills WXL Coated 2 Flutes (1.5D Type)_WXL-1.5D-DE
OSG
[Notice]Alterations can now be specified. Please select from "Standard/Alterations Category" of narrowing conditions.[Features]・ A 2-flute end mill with a rigid lubricating film WXL coating.・ Effective for cutting not only steel but also copper alloys.・ A 1.5D flute length type that is recommended for both wet and dry machining.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 0.1 ～ 12 0.15 ～ 18 - 4 ～ 12 2 45 ～ 75 High Hardness Steel-HRC55[○] Standard torsion (30-40°) Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts For General Steels (AlCrN, etc.) Sharp Edge Square From: 275,205 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Micro Grain Carbide End Mills WXL Coated 2 Flutes (3D Type)_WXL-3D-DE
OSG
2-flute end mill with hard lubricant film WXL coating applied. It is effective for cutting copper alloys as well as steel. Recommended for both wet and dry work.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 0.1 ～ 20 0.3 ～ 60 - 4 ～ 20 2 45 ～ 130 High Hardness Steel-HRC55[○] Standard torsion (30-40°) Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts For General Steels (AlCrN, etc.) Sharp Edge / With Lead Square From: 285,000 VND Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
![4-Flute Short (Strong Heavy Cutting Type), WX-PHS [Alterations Available]](//vn.misumi-ec.com/linked/material/fs/OSG1/PHOTO/223000432310.jpg?$product_view_b$)
4-Flute Short (Strong Heavy Cutting Type), WX-PHS [Alterations Available]
OSG
[Notice] Alterations can now be specified. Please select from "Standard/Alterations Category" of narrowing conditions.[Features]・ A high helix end mill that achieves both high cutting chip discharge and cutting edge rigidity. Highly efficient heavy cutting is possible not only for side cutting but also for groove cutting.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 4 ～ 6 11 ～ 13 - 6 4 60 High Hardness Steel-HRC55[○] Powerful Torsion (45°-60°) Plane / Side / Groove / Inclined Cuts TiAlN With Lead Square From: 1,810,000 VND Days to Ship: Số ngày giao hàng: 15 Day(s)
15 Day(s)
-
You can add up to 6 items per a category to the compare list.
ULTRA FX SUPER Micro Grain Carbide End Mills TiAlN coated Standard Speed Multi-Purpose_FXS-HPE
OSG
Since it has a long shank, it enables high-efficiency machining even when working on wall grooves, with no concern required for interference.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 10 ～ 14 15 ～ 21 - 8 ～ 12 4 130 ～ 160 High Hardness Steel-HRC55[◎] Powerful Torsion (45°-60°) Plane / Side / Groove / Inclined Cuts TiAlN With Lead Square From: 3,242,922 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
MSE430 MUGEN-COATING 4-Flute End Mill
NS TOOL
[Notice] Alterations can now be specified. Please select from "Standard/Alterations Category" of narrowing conditions.[Features]・ MUGEN coating is used for the 4-flute end mill.・ A wide range of cutting is possible from raw materials to high hardness materials.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 1 ～ 12 2.5 ～ 30 - 4 ～ 12 4 45 ～ 80 High Hardness Steel-HRC55[◎] Standard torsion (30-40°) Plane / Side / Inclined Cuts TiAlN With Lead Square From: 577,962 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
MX435 MUGEN-COATING 4-Flute LEAD 35 End Mill
NS TOOL
[Notice] Alterations can now be specified. Please select from "Standard/Alterations Category" of narrowing conditions.[Features]・ The flute length is 3 times the cutting diameter and features a 35° helix angle.・ Eliminates the problem that the 2 × D flute length is not enough and the 4 × D flute length is long.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 1 ～ 12 3 ～ 36 - 4 ～ 12 4 45 ～ 80 High Hardness Steel-HRC55[◎] Standard torsion (30-40°) Plane / Side / Groove / Inclined Cuts TiAlN With Lead Square From: 577,962 VND Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
YG 1
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 0.5 ～ 12 0.5 ～ 30 - 4 ～ 12 2 40 ～ 80 High Hardness Steel-HRC55[◎] Standard torsion (30-40°) Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts BLUE - Square From: 545,347 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
MISUMI
· A highly versatile series that's ideal for machining work materials from tempered steel (up to 45 HRC) to high hardness steel (up to 65 HRC).· Coating with excellent hardness and heat resistance makes it suitable for high speed machining.· Popular XCP series end mill with a shape that emphasizes blade tip rigidity
- Volume Discount
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 1 ～ 12 2 ～ 24 5 ～ 25 3 ～ 12 4 40 ～ 75 High Hardness Steel-HRC55[◎] Standard torsion (30-40°) Plane / Side / Groove / Inclined Cuts For High Hardness (Silicon Group) With Lead Square From: 439,900 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
MISUMI
· A highly versatile series that's ideal for machining work materials from tempered steel (up to 45 HRC) to high hardness steel (up to 65 HRC).· Coating with excellent hardness and heat resistance makes it suitable for high speed machining.· Available in MISUMI's extensive blade tip specifications
- Volume Discount
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 1 ～ 16 2.5 ～ 40 - 3 ～ 16 4 40 ～ 120 High Hardness Steel-HRC55[◎] Standard torsion (30-40°) Plane / Side / Groove / Inclined Cuts For High Hardness (Silicon Group) With Lead Square From: 344,500 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
VAC Series Carbide 4-Flute Square End Mill (Extra-Long Model)
MISUMI
[Features]·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)·Effective for processing deep parts due to extra long blade length·Ultra-fine particle cemented carbide base material and coating with excellent adhesion and heat resistance are adopted·Can process heat-treated steel up to 50HRC·Optimal for machining in low to medium rotation range due to the general-purpose 30° helix angle·Coating with excellent lubricity provides stable abrasion resistance and improves shape accuracy of workpiece (VAC coating has weak electrical conductivity. Please be careful when using an electrical tool setter.)·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.
- Volume Discount
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 1.5 ～ 25 6 ～ 120 - 4 ～ 25 4 60 ～ 250 High Hardness Steel-HRC55[○] - Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking - - Square From: 890,809 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
NACHI(FUJIKOSHI)
Variable split and variable leads have been used to suppress chatter which is likely to occur during high-speed and high-efficiency processing.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 3 ～ 20 7.5 ～ 50 - 6 ～ 20 4 45 ～ 100 High Hardness Steel-HRC55[◎] Powerful Torsion (45°-60°) Plane / Side / Groove / Inclined Cuts For General Steels (AlCrN, etc.) With Lead Square From: 1,369,780 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
GSX MILL 2-Flute Blade 3D GSX2C-3D
NACHI(FUJIKOSHI)
Supports wet processing of raw materials through dry processing of high hardness materials.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 1 ～ 20 3 ～ 60 - 4 ～ 20 2 40 ～ 120 High Hardness Steel-HRC55[◎] Standard torsion (30-40°) Plane / Side / Groove / Inclined Cuts For General Steels (AlCrN, etc.) With Lead Square From: 395,209 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
NACHI(FUJIKOSHI)
Supports a wide range of applications from raw materials to high hardness steel.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 2 ～ 20 10 ～ 56 - 4 ～ 20 4 50 ～ 125 High Hardness Steel-HRC55[◎] Standard torsion (30-40°) Plane / Side / Groove / Inclined Cuts TiAlN With Lead Square From: 1,563,133 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
NACHI(FUJIKOSHI)
Supports a wide range of materials from raw materials to hardened materials. Suitable for side surface machining.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 2 ～ 25 6 ～ 45 - 4 ～ 25 4 40 ～ 120 High Hardness Steel-HRC55[○] Standard torsion (30-40°) Plane / Side / Groove / Inclined Cuts TiAlN Sharp Edge Square From: 1,554,693 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
ULTRA WX Micro Grain Carbide End Mills TiAlN coated 2 Flutes Stub (Corner Protect Type)_WX-G-EDSS
OSG
Heavy duty type 2-flute end mill with reinforced bottom blade corner. Capable of heavy cutting thanks to its rigid short blade length. Enables reductions in lead time during mass production machining.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 1 ～ 12 1.5 ～ 18 - 4 ～ 12 2 40 ～ 75 High Hardness Steel-HRC55[○] Standard torsion (30-40°) Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts TiAlN With Lead Square From: 591,666 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
ULTRA WX Micro Grain Carbide End Mills TiAlN Coated 3 Flutes Stub for Slotting_WX-SHTSS
OSG
[Notice] Alterations can now be specified. Please select from "Standard/Alterations Category" of narrowing conditions.[Features]・ This is an end mill that allows continuous grooving after drilling without pre-machining. The number of tools in the magazine can be reduced.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 3 ～ 12 4.5 ～ 18 - 6 ～ 12 3 50 ～ 75 High Hardness Steel-HRC55[○] Powerful Torsion (45°-60°) Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts TiAlN With Lead Square From: 1,342,414 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
OSG
A multi-functional end mill which minimizes chatter to allow highly efficient machining of grooves and side walls.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 3 ～ 12 8 ～ 26 - 6 ～ 12 4 60 ～ 100 High Hardness Steel-HRC55[○] Standard torsion (30-40°) Plane / Side / Groove / Inclined Cuts TiAlN With Lead Square From: 1,526,937 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
![4-Flute Medium Type WX-PHN [Alterations Available]](//vn.misumi-ec.com/linked/material/fs/OSG1/PHOTO/223000432332.jpg?$product_view_b$)
4-Flute Medium Type WX-PHN [Alterations Available]
OSG
[Notice] Alterations can now be specified. Please select from "Standard/Alterations Category" of narrowing conditions.[Features]・ A medium flute length type with a high helix end mill that achieves a high level of cutting chip discharge and cutting edge rigidity. Compatible with a wide range of work materials.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 3 ～ 5 10 ～ 17 - 6 4 60 High Hardness Steel-HRC55[○] Powerful Torsion (45°-60°) Plane / Side / Groove / Inclined Cuts TiAlN With Lead Square From: 1,713,427 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
MIRA BORON CBN brazed End Mills 1 Flute Short_MBOS
OSG
CBN tip brazed type end mill. Exhibits true performance when machining hardened steel.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 6 ～ 12 3 ～ 6 12 ～ 24 6 ～ 12 1 50 ～ 75 High Hardness Steel-HRC55[○] No torsion Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts Non-Coated With Lead Square From: 5,502,836 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Micro Grain Carbide End Mills Multiple Flutes Short_NEO-EMS
OSG
[Notice] Alterations can now be specified. Please select from "Standard/Alterations Category" of narrowing conditions.[Features]・ The advanced "unequal lead" effect suppresses chatter and realizes amazing high efficiency machining.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 6 ～ 25 12 ～ 50 - 6 ～ 25 6 50 ～ 120 High Hardness Steel-HRC55[◎] Standard torsion (30-40°) Plane / Side TiAlN With Lead Square From: 2,066,735 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
MHDH645 6-Flute Square-End Mill for High-Hardness
NS TOOL
[Notice] Alterations can now be specified. Please select from "Standard/Alterations Category" of narrowing conditions.[Features]・ The MUGEN Coating Premium for high hardness and the unique new shape give the tool excellent chipping resistance, and reduced chattering improves the finished surface.・ Lineup of 2D and 3D flute lengths.・ Achieves stable and long lifespan even during long-time machining in the high hardness region (48 to 65 HRC).・ Pursue the shape of the flute and improve the amount of tilt and machining precision.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 5 ～ 12 10 ～ 36 - 6 ～ 12 6 60 ～ 90 High Hardness Steel-HRC55[◎] Powerful Torsion (45°-60°) Plane / Side For High Hardness (Silicon Group) With Lead Square From: 1,553,297 VND Days to Ship: Số ngày giao hàng: 8 Day(s) or more
8 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
MSE430P MUGEN-COATING 4-Flute Sharp Edge End Mill
NS TOOL
[Notice] Alterations can now be specified. Please select from "Standard/Alterations Category" of narrowing conditions.[Features]・ A wide range of non-ferrous to steel materials can be cut with sharp corners.・ Finish-machining with less tilt is possible.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 1 ～ 12 2.5 ～ 30 - 4 ～ 12 4 45 ～ 80 High Hardness Steel-HRC55[◎] Standard torsion (30-40°) Plane / Side / Groove / Inclined Cuts TiAlN Sharp Edge Square From: 704,256 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
MSZ345 MUGEN-COATING POWER "Z" End Mill
NS TOOL
[Notice] Alterations can now be specified. Please select from "Standard/Alterations Category" of narrowing conditions.[Features]・ With the newly developed special flute shape, the machining application capacity is greatly improved.・ Achieves unprecedented high efficiency machining from drilling to groove machining.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 1 ～ 12 1.5 ～ 26 - 4 ～ 12 3 45 ～ 80 High Hardness Steel-HRC55[○] Powerful Torsion (45°-60°) Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts TiAlN With Lead Square From: 1,119,727 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
MX230 MUGEN-COATING 2-Flute LEAD 30 End Mill
NS TOOL
[Notice] Alterations can now be specified. Please select from "Standard/Alterations Category" of narrowing conditions.[Features]・ The flute length is twice the cutting diameter and features a 30° helix angle.・ Standard type that supports almighty regardless of groove or side surface.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 0.1 ～ 12 0.2 ～ 24 - 4 ～ 12 2 45 ～ 80 High Hardness Steel-HRC55[◎] Standard torsion (30-40°) Plane / Side / Groove / Inclined Cuts TiAlN With Lead Square From: 343,078 VND Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
MX440 MUGEN-COATING 4-Flute LEAD 40 End Mill
NS TOOL
[Notice] Alterations can now be specified. Please select from "Standard/Alterations Category" of narrowing conditions.[Features]・ The flute length is 4 times the cutting diameter and features a 40° helix angle.・ Deep machining can be performed smoothly, and even with a long flute, the tilt of the machining surface is minimized.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 1 ～ 12 4 ～ 48 - 4 ～ 12 4 45 ～ 105 High Hardness Steel-HRC55[◎] Standard torsion (30-40°) Plane / Side / Groove / Inclined Cuts TiAlN With Lead Square From: 704,256 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
MX445 MUGEN-COATING 4-Flute LEAD 45 End Mill
NS TOOL
[Notice] Alterations can now be specified. Please select from "Standard/Alterations Category" of narrowing conditions.[Features]・ Unique high-stiffness design enables high-precision and efficient machining.・ The flute length is 5 times the cutting diameter and features a 45° helix angle.・ Even with an ultra-long flute, the tilt of the machined surface is minimized.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 1 ～ 12 5 ～ 60 - 4 ～ 12 4 45 ～ 105 High Hardness Steel-HRC55[◎] Powerful Torsion (45°-60°) Plane / Side / Groove / Inclined Cuts TiAlN With Lead Square From: 939,139 VND Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
NS TOOL
Enables machining of corner edges of high-hardness materials. Adopts a unique multi-flute shape for improved abrasion resistance
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 0.1 0.04 0.2 ～ 0.5 4 4 53 High Hardness Steel-HRC55[◎] No torsion Plane / Side / Groove Non-Coated With Lead Square From: 5,996,799 VND Days to Ship: Số ngày giao hàng: 12 Day(s)
12 Day(s)
![CZS, UT Coat, 4-Flute Square [Alteration Supported Product]](http://vn.misumi-ec.com/linked/material/fs/UNO1/PHOTO/223000571987.jpg?$product_view_b$)
![4-Flute Short (Strong Heavy Cutting Type), WX-PHS [Alterations Available]](http://vn.misumi-ec.com/linked/material/fs/OSG1/PHOTO/223000432310.jpg?$product_view_b$)
![4-Flute Medium Type WX-PHN [Alterations Available]](http://vn.misumi-ec.com/linked/material/fs/OSG1/PHOTO/223000432332.jpg?$product_view_b$)
| BrandNhãn hiệu |
|---|
| Product SeriesDòng sản phẩm |
| CADCAD |
| From |
| Days to ShipSố ngày giao hàng |
| Blade diameter (D)(φ) |
| Blade length (ℓ)(mm) |
| Underneck length (ℓ1)(mm) |
| Shank diameter (d)(mm) |
| Number of flutes(sheet) |
| Overall Length (L)(mm) |
| work material |
| Torsion Angle (θ) |
| Machining Application |
| Coating |
| Blade tip shape |
| Type |
You can add up to 6 items per a category to the compare list. 
| You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list. 
| You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list. ![CZS, UT Coat, 4-Flute Square [Alteration Supported Product]](http://vn.misumi-ec.com/linked/material/fs/UNO1/PHOTO/223000571987.jpg?$product_view_c$) | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list. 
| You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list. ![4-Flute Short (Strong Heavy Cutting Type), WX-PHS [Alterations Available]](http://vn.misumi-ec.com/linked/material/fs/OSG1/PHOTO/223000432310.jpg?$product_view_c$) | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list. ![4-Flute Medium Type WX-PHN [Alterations Available]](http://vn.misumi-ec.com/linked/material/fs/OSG1/PHOTO/223000432332.jpg?$product_view_c$) | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | |
| BrandNhãn hiệu | OSG | NACHI(FUJIKOSHI) | OSG | OSG KOREA CORP | OSG | OSG | NS TOOL | YG 1 | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | OSG | UNION TOOL | OSG KOREA CORP | NACHI(FUJIKOSHI) | NS TOOL | MISUMI | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | OSG | OSG | OSG | OSG | NS TOOL | NS TOOL | YG 1 | MISUMI | MISUMI | MISUMI | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | OSG | OSG | OSG | OSG | OSG | OSG | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL |
| Product SeriesDòng sản phẩm | Micro Grain Carbide End Mills WXL Coated 4 Flutes Short_WXL-EMS | Micro Grain Carbide End Mills WXL Coated 2 Flutes (2D Type)_WXL-2D-DE | ULTRA FX Micro Grain Carbide End Mills TiAlN coated 4 Flutes Short_FX-MG-EMS | Micro Grain Carbide End Mills WXL Coated 2 Flutes (4D Type)_WXL-4D-DE | ULTRA FX Micro Grain Carbide End Mills TiAlN coated 2 Flutes Short_FX-MG-EDS | VAC Series Carbide 2-Flute Square End Mill (Extra-Long Model) | Micro Grain Carbide End Mills WXL Coated 2 Flutes (1.5D Type)_WXL-1.5D-DE | Micro Grain Carbide End Mills WXL Coated 2 Flutes (3D Type)_WXL-3D-DE | 4-Flute Short (Strong Heavy Cutting Type), WX-PHS [Alterations Available] | ULTRA FX SUPER Micro Grain Carbide End Mills TiAlN coated Standard Speed Multi-Purpose_FXS-HPE | VAC Series Carbide 4-Flute Square End Mill (Extra-Long Model) | ULTRA WX Micro Grain Carbide End Mills TiAlN coated 2 Flutes Stub (Corner Protect Type)_WX-G-EDSS | ULTRA WX Micro Grain Carbide End Mills TiAlN Coated 3 Flutes Stub for Slotting_WX-SHTSS | ||||||||||||||||||||||||||||||||
| CADCAD | |||||||||||||||||||||||||||||||||||||||||||||
| From | 428,333 VND Special Price On Sale Till 31/03/2025 | 540,666 VND | 285,000 VND | 572,324 VND | 1,920,376 VND | 483,333 VND Special Price On Sale Till 31/03/2025 | 379,275 VND | 541,798 VND | 589,568 VND | 840,386 VND | 1,429,954 VND | 901,172 VND | 415,957 VND | 589,568 VND | 1,174,022 VND | 680,058 VND Special Price On Sale Till 31/03/2025 | 589,568 VND | 589,568 VND | 275,205 VND | 285,000 VND | 1,810,000 VND | 3,242,922 VND | 577,962 VND | 577,962 VND | 545,347 VND | 439,900 VND | 344,500 VND | 890,809 VND | 1,369,780 VND | 395,209 VND | 1,563,133 VND | 1,554,693 VND | 591,666 VND | 1,342,414 VND | 1,526,937 VND | 1,713,427 VND | 5,502,836 VND | 2,066,735 VND | 1,553,297 VND | 704,256 VND | 1,119,727 VND | 343,078 VND | 704,256 VND | 939,139 VND | 5,996,799 VND |
| Days to ShipSố ngày giao hàng | Same day or more | Same day or more | Same day or more | Same day or more | 6 Day(s) or more | Same day or more | 6 Day(s) or more | Same day or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | Same day or more | 9 Day(s) | Same day or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | Same day or more | 15 Day(s) | 6 Day(s) or more | 6 Day(s) or more | Same day or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 4 Day(s) or more | 8 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | Same day or more | 6 Day(s) or more | Same day or more | 12 Day(s) |
| Blade diameter (D)(φ) | 1 ～ 30 | 1 ～ 18 | 0.1 ～ 30 | 1 ～ 25 | 2 ～ 30 | 0.2 ～ 12 | 0.1 ～ 12 | 1 ～ 16 | 1 ～ 20 | 1 ～ 20 | 0.2 ～ 30 | 1 ～ 20 | 0.1 ～ 25 | 1 ～ 20 | 1 ～ 4 | 1 ～ 20 | 1 ～ 20 | 1 ～ 20 | 0.1 ～ 12 | 0.1 ～ 20 | 4 ～ 6 | 10 ～ 14 | 1 ～ 12 | 1 ～ 12 | 0.5 ～ 12 | 1 ～ 12 | 1 ～ 16 | 1.5 ～ 25 | 3 ～ 20 | 1 ～ 20 | 2 ～ 20 | 2 ～ 25 | 1 ～ 12 | 3 ～ 12 | 3 ～ 12 | 3 ～ 5 | 6 ～ 12 | 6 ～ 25 | 5 ～ 12 | 1 ～ 12 | 1 ～ 12 | 0.1 ～ 12 | 1 ～ 12 | 1 ～ 12 | 0.1 |
| Blade length (ℓ)(mm) | 2.5 ～ 45 | 2.5 ～ 32 | 0.2 ～ 60 | 2.5 ～ 45 | 6 ～ 45 | 0.8 ～ 48 | 0.15 ～ 30 | 2.5 ～ 40 | 1.5 ～ 30 | 4 ～ 80 | 0.4 ～ 45 | 1.5 ～ 40 | 0.2 ～ 45 | 2.5 ～ 50 | 2 ～ 8 | 4 ～ 80 | 3 ～ 60 | 2 ～ 40 | 0.15 ～ 18 | 0.3 ～ 60 | 11 ～ 13 | 15 ～ 21 | 2.5 ～ 30 | 3 ～ 36 | 0.5 ～ 30 | 2 ～ 24 | 2.5 ～ 40 | 6 ～ 120 | 7.5 ～ 50 | 3 ～ 60 | 10 ～ 56 | 6 ～ 45 | 1.5 ～ 18 | 4.5 ～ 18 | 8 ～ 26 | 10 ～ 17 | 3 ～ 6 | 12 ～ 50 | 10 ～ 36 | 2.5 ～ 30 | 1.5 ～ 26 | 0.2 ～ 24 | 4 ～ 48 | 5 ～ 60 | 0.04 |
| Underneck length (ℓ1)(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 5 ～ 25 | - | - | - | - | - | - | - | - | - | - | 12 ～ 24 | - | - | - | - | - | - | - | 0.2 ～ 0.5 |
| Shank diameter (d)(mm) | 4 ～ 32 | 3 ～ 20 | 4 ～ 32 | 6 ～ 25 | 4 ～ 32 | 4 ～ 12 | 4 ～ 12 | 6 ～ 16 | 4 ～ 20 | 4 ～ 20 | 3 ～ 32 | 4 ～ 20 | 4 ～ 25 | 4 ～ 20 | 6 | 6 ～ 20 | 4 ～ 20 | 4 ～ 20 | 4 ～ 12 | 4 ～ 20 | 6 | 8 ～ 12 | 4 ～ 12 | 4 ～ 12 | 4 ～ 12 | 3 ～ 12 | 3 ～ 16 | 4 ～ 25 | 6 ～ 20 | 4 ～ 20 | 4 ～ 20 | 4 ～ 25 | 4 ～ 12 | 6 ～ 12 | 6 ～ 12 | 6 | 6 ～ 12 | 6 ～ 25 | 6 ～ 12 | 4 ～ 12 | 4 ～ 12 | 4 ～ 12 | 4 ～ 12 | 4 ～ 12 | 4 |
| Number of flutes(sheet) | 4 | 4 | 2 | 4 | 4 | 2 | 2 | 4 | 3 | 4 | 2 | 4 | 2 | 4 | 4 | 2 | 4 | 4 | 2 | 2 | 4 | 4 | 4 | 4 | 2 | 4 | 4 | 4 | 4 | 2 | 4 | 4 | 2 | 3 | 4 | 4 | 1 | 6 | 6 | 4 | 3 | 2 | 4 | 4 | 4 |
| Overall Length (L)(mm) | 40 ～ 125 | 38 ～ 100 | 45 ～ 140 | 40 ～ 120 | 40 ～ 125 | 45 ～ 100 | 45 ～ 80 | 50 ～ 100 | 40 ～ 100 | 40 ～ 140 | 40 ～ 125 | 50 ～ 125 | 40 ～ 120 | 40 ～ 100 | 60 | 60 ～ 200 | 40 ～ 120 | 40 ～ 100 | 45 ～ 75 | 45 ～ 130 | 60 | 130 ～ 160 | 45 ～ 80 | 45 ～ 80 | 40 ～ 80 | 40 ～ 75 | 40 ～ 120 | 60 ～ 250 | 45 ～ 100 | 40 ～ 120 | 50 ～ 125 | 40 ～ 120 | 40 ～ 75 | 50 ～ 75 | 60 ～ 100 | 60 | 50 ～ 75 | 50 ～ 120 | 60 ～ 90 | 45 ～ 80 | 45 ～ 80 | 45 ～ 80 | 45 ～ 105 | 45 ～ 105 | 53 |
| work material | High Hardness Steel-HRC55[○] | High Hardness Steel-HRC55[◎] | High Hardness Steel-HRC55[○] | High Hardness Steel-HRC55[○] | High Hardness Steel-HRC55[○] | High Hardness Steel-HRC55[○] | High Hardness Steel-HRC55[◎] | High Hardness Steel-HRC55[○] | High Hardness Steel-HRC55[◎] | High Hardness Steel-HRC55[◎] | High Hardness Steel-HRC55[○] | High Hardness Steel-HRC55[○] | High Hardness Steel-HRC55[○] | High Hardness Steel-HRC55[◎] | High Hardness Steel-HRC55[◎] | High Hardness Steel-HRC55[○] | High Hardness Steel-HRC55[◎] | High Hardness Steel-HRC55[◎] | High Hardness Steel-HRC55[○] | High Hardness Steel-HRC55[○] | High Hardness Steel-HRC55[○] | High Hardness Steel-HRC55[◎] | High Hardness Steel-HRC55[◎] | High Hardness Steel-HRC55[◎] | High Hardness Steel-HRC55[◎] | High Hardness Steel-HRC55[◎] | High Hardness Steel-HRC55[◎] | High Hardness Steel-HRC55[○] | High Hardness Steel-HRC55[◎] | High Hardness Steel-HRC55[◎] | High Hardness Steel-HRC55[◎] | High Hardness Steel-HRC55[○] | High Hardness Steel-HRC55[○] | High Hardness Steel-HRC55[○] | High Hardness Steel-HRC55[○] | High Hardness Steel-HRC55[○] | High Hardness Steel-HRC55[○] | High Hardness Steel-HRC55[◎] | High Hardness Steel-HRC55[◎] | High Hardness Steel-HRC55[◎] | High Hardness Steel-HRC55[○] | High Hardness Steel-HRC55[◎] | High Hardness Steel-HRC55[◎] | High Hardness Steel-HRC55[◎] | High Hardness Steel-HRC55[◎] |
| Torsion Angle (θ) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Powerful Torsion (45°-60°) | - | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | - | Powerful Torsion (45°-60°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Powerful Torsion (45°-60°) | Standard torsion (30-40°) | Powerful Torsion (45°-60°) | No torsion | Standard torsion (30-40°) | Powerful Torsion (45°-60°) | Standard torsion (30-40°) | Powerful Torsion (45°-60°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Powerful Torsion (45°-60°) | No torsion |
| Machining Application | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side | Plane / Side | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove |
| Coating | For General Steels (AlCrN, etc.) | TiAlN | For General Steels (AlCrN, etc.) | FX | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | TiAlN | AlTiN | For General Steels (AlCrN, etc.) | TiAlN | TiAlN | - | FX | For General Steels (AlCrN, etc.) | For High Hardness (Silicon Group) | - | TiAlN | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | TiAlN | TiAlN | TiAlN | TiAlN | BLUE | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | - | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | Non-Coated | TiAlN | For High Hardness (Silicon Group) | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | Non-Coated |
| Blade tip shape | Sharp Edge / With Lead | Sharp Edge | Sharp Edge | - | Sharp Edge | With Lead | With Lead | - | With Lead | With Lead | Sharp Edge | With Lead | - | With Lead | With Lead | - | With Lead | With Lead | Sharp Edge | Sharp Edge / With Lead | With Lead | With Lead | With Lead | With Lead | - | With Lead | With Lead | - | With Lead | With Lead | With Lead | Sharp Edge | With Lead | With Lead | With Lead | With Lead | With Lead | With Lead | With Lead | Sharp Edge | With Lead | With Lead | With Lead | With Lead | With Lead |
| Type | Square | Square | Square | Square | Square | Square | Square | Long-Neck Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square |
Loading...Tải…
ConfigureTạo
Specification/DimensionsĐặc điểm kỹ thuật / Kích thướcĐặc điểm kỹ thuật / Kích thước
-
Blade diameter (D)(φ)
-
0.01～0.99
- 0.01
- 0.02
- 0.03
- 0.04
- 0.05
- 0.06
- 0.07
- 0.08
- 0.09
- 0.1
- 0.11
- 0.12
- 0.13
- 0.14
- 0.15
- 0.16
- 0.17
- 0.18
- 0.19
- 0.2
- 0.21
- 0.22
- 0.23
- 0.24
- 0.25
- 0.26
- 0.27
- 0.28
- 0.29
- 0.3
- 0.31
- 0.32
- 0.33
- 0.34
- 0.35
- 0.36
- 0.37
- 0.38
- 0.39
- 0.4
- 0.41
- 0.42
- 0.43
- 0.44
- 0.45
- 0.46
- 0.47
- 0.48
- 0.49
- 0.5
- 0.51
- 0.52
- 0.53
- 0.54
- 0.55
- 0.56
- 0.57
- 0.58
- 0.59
- 0.6
- 0.61
- 0.62
- 0.63
- 0.64
- 0.65
- 0.66
- 0.67
- 0.68
- 0.69
- 0.7
- 0.71
- 0.72
- 0.73
- 0.74
- 0.75
- 0.76
- 0.77
- 0.78
- 0.79
- 0.8
- 0.81
- 0.82
- 0.83
- 0.84
- 0.85
- 0.86
- 0.87
- 0.88
- 0.89
- 0.9
- 0.91
- 0.92
- 0.93
- 0.94
- 0.95
- 0.96
- 0.97
- 0.98
- 0.99
-
1～1.99
- 1
- 1.01
- 1.02
- 1.03
- 1.04
- 1.05
- 1.06
- 1.07
- 1.08
- 1.09
- 1.1
- 1.11
- 1.12
- 1.13
- 1.14
- 1.15
- 1.16
- 1.17
- 1.18
- 1.19
- 1.2
- 1.21
- 1.22
- 1.23
- 1.24
- 1.25
- 1.26
- 1.27
- 1.28
- 1.29
- 1.3
- 1.31
- 1.32
- 1.33
- 1.34
- 1.35
- 1.36
- 1.37
- 1.38
- 1.39
- 1.4
- 1.41
- 1.42
- 1.43
- 1.44
- 1.45
- 1.46
- 1.47
- 1.48
- 1.49
- 1.5
- 1.51
- 1.52
- 1.53
- 1.54
- 1.55
- 1.56
- 1.57
- 1.58
- 1.59
- 1.6
- 1.61
- 1.62
- 1.63
- 1.64
- 1.65
- 1.66
- 1.67
- 1.68
- 1.69
- 1.7
- 1.71
- 1.72
- 1.73
- 1.74
- 1.75
- 1.76
- 1.77
- 1.78
- 1.79
- 1.8
- 1.81
- 1.82
- 1.83
- 1.84
- 1.85
- 1.86
- 1.87
- 1.88
- 1.89
- 1.9
- 1.91
- 1.92
- 1.93
- 1.94
- 1.95
- 1.96
- 1.97
- 1.98
- 1.99
-
2～2.99
- 2
- 2.01
- 2.02
- 2.03
- 2.04
- 2.05
- 2.06
- 2.07
- 2.08
- 2.09
- 2.1
- 2.11
- 2.12
- 2.13
- 2.14
- 2.15
- 2.16
- 2.17
- 2.18
- 2.19
- 2.2
- 2.21
- 2.22
- 2.23
- 2.24
- 2.25
- 2.26
- 2.27
- 2.28
- 2.29
- 2.3
- 2.31
- 2.32
- 2.33
- 2.34
- 2.35
- 2.36
- 2.37
- 2.38
- 2.39
- 2.4
- 2.41
- 2.42
- 2.43
- 2.44
- 2.45
- 2.46
- 2.47
- 2.48
- 2.49
- 2.5
- 2.51
- 2.52
- 2.53
- 2.54
- 2.55
- 2.56
- 2.57
- 2.58
- 2.59
- 2.6
- 2.61
- 2.62
- 2.63
- 2.64
- 2.65
- 2.66
- 2.67
- 2.68
- 2.69
- 2.7
- 2.71
- 2.72
- 2.73
- 2.74
- 2.75
- 2.76
- 2.77
- 2.78
- 2.79
- 2.8
- 2.81
- 2.82
- 2.83
- 2.84
- 2.85
- 2.86
- 2.87
- 2.88
- 2.89
- 2.9
- 2.91
- 2.92
- 2.93
- 2.94
- 2.95
- 2.96
- 2.97
- 2.98
- 2.99
-
3～3.99
- 3
- 3.01
- 3.02
- 3.03
- 3.04
- 3.05
- 3.06
- 3.07
- 3.08
- 3.09
- 3.1
- 3.11
- 3.12
- 3.13
- 3.14
- 3.15
- 3.16
- 3.17
- 3.175
- 3.18
- 3.19
- 3.2
- 3.21
- 3.22
- 3.23
- 3.24
- 3.25
- 3.26
- 3.27
- 3.28
- 3.29
- 3.3
- 3.31
- 3.32
- 3.33
- 3.34
- 3.35
- 3.36
- 3.37
- 3.38
- 3.39
- 3.4
- 3.41
- 3.42
- 3.43
- 3.44
- 3.45
- 3.46
- 3.47
- 3.48
- 3.49
- 3.5
- 3.51
- 3.52
- 3.53
- 3.54
- 3.55
- 3.56
- 3.57
- 3.58
- 3.59
- 3.6
- 3.61
- 3.62
- 3.63
- 3.64
- 3.65
- 3.66
- 3.67
- 3.68
- 3.69
- 3.7
- 3.71
- 3.72
- 3.73
- 3.74
- 3.75
- 3.76
- 3.77
- 3.78
- 3.79
- 3.8
- 3.81
- 3.82
- 3.83
- 3.84
- 3.85
- 3.86
- 3.87
- 3.88
- 3.89
- 3.9
- 3.91
- 3.92
- 3.93
- 3.94
- 3.95
- 3.96
- 3.97
- 3.98
- 3.99
-
4～4.99
- 4
- 4.01
- 4.02
- 4.03
- 4.04
- 4.05
- 4.06
- 4.07
- 4.08
- 4.09
- 4.1
- 4.11
- 4.12
- 4.13
- 4.14
- 4.15
- 4.16
- 4.17
- 4.18
- 4.19
- 4.2
- 4.21
- 4.22
- 4.23
- 4.24
- 4.25
- 4.26
- 4.27
- 4.28
- 4.29
- 4.3
- 4.31
- 4.32
- 4.33
- 4.34
- 4.35
- 4.36
- 4.37
- 4.38
- 4.39
- 4.4
- 4.41
- 4.42
- 4.43
- 4.44
- 4.45
- 4.46
- 4.47
- 4.48
- 4.49
- 4.5
- 4.51
- 4.52
- 4.53
- 4.54
- 4.55
- 4.56
- 4.57
- 4.58
- 4.59
- 4.6
- 4.61
- 4.62
- 4.63
- 4.64
- 4.65
- 4.66
- 4.67
- 4.68
- 4.69
- 4.7
- 4.71
- 4.72
- 4.73
- 4.74
- 4.75
- 4.76
- 4.77
- 4.78
- 4.79
- 4.8
- 4.81
- 4.82
- 4.83
- 4.84
- 4.85
- 4.86
- 4.87
- 4.88
- 4.89
- 4.9
- 4.91
- 4.92
- 4.93
- 4.94
- 4.95
- 4.96
- 4.97
- 4.98
- 4.99
-
5～5.99
- 5
- 5.01
- 5.02
- 5.03
- 5.04
- 5.05
- 5.06
- 5.07
- 5.08
- 5.09
- 5.1
- 5.11
- 5.12
- 5.13
- 5.14
- 5.15
- 5.16
- 5.17
- 5.18
- 5.19
- 5.2
- 5.21
- 5.22
- 5.23
- 5.24
- 5.25
- 5.26
- 5.27
- 5.28
- 5.29
- 5.3
- 5.31
- 5.32
- 5.33
- 5.34
- 5.35
- 5.36
- 5.37
- 5.38
- 5.39
- 5.4
- 5.41
- 5.42
- 5.43
- 5.44
- 5.45
- 5.46
- 5.47
- 5.48
- 5.49
- 5.5
- 5.51
- 5.52
- 5.53
- 5.54
- 5.55
- 5.56
- 5.57
- 5.58
- 5.59
- 5.6
- 5.61
- 5.62
- 5.63
- 5.64
- 5.65
- 5.66
- 5.67
- 5.68
- 5.69
- 5.7
- 5.71
- 5.72
- 5.73
- 5.74
- 5.75
- 5.76
- 5.77
- 5.78
- 5.79
- 5.8
- 5.81
- 5.82
- 5.83
- 5.84
- 5.85
- 5.86
- 5.87
- 5.88
- 5.89
- 5.9
- 5.91
- 5.92
- 5.93
- 5.94
- 5.95
- 5.96
- 5.97
- 5.98
- 5.99
-
6～6.9
- 6
- 6.01
- 6.05
- 6.1
- 6.2
- 6.25
- 6.3
- 6.35
- 6.4
- 6.5
- 6.57
- 6.6
- 6.7
- 6.75
- 6.8
- 6.9
-
7～7.99
- 7
- 7.01
- 7.02
- 7.03
- 7.04
- 7.05
- 7.06
- 7.07
- 7.08
- 7.09
- 7.1
- 7.11
- 7.12
- 7.13
- 7.14
- 7.15
- 7.16
- 7.17
- 7.18
- 7.19
- 7.2
- 7.21
- 7.22
- 7.23
- 7.24
- 7.25
- 7.26
- 7.27
- 7.28
- 7.29
- 7.3
- 7.31
- 7.32
- 7.33
- 7.34
- 7.35
- 7.36
- 7.37
- 7.38
- 7.39
- 7.4
- 7.41
- 7.42
- 7.43
- 7.44
- 7.45
- 7.46
- 7.47
- 7.48
- 7.49
- 7.5
- 7.51
- 7.52
- 7.53
- 7.54
- 7.55
- 7.56
- 7.57
- 7.58
- 7.59
- 7.6
- 7.61
- 7.62
- 7.63
- 7.64
- 7.65
- 7.66
- 7.67
- 7.68
- 7.69
- 7.7
- 7.71
- 7.72
- 7.73
- 7.74
- 7.75
- 7.76
- 7.77
- 7.78
- 7.79
- 7.8
- 7.81
- 7.82
- 7.83
- 7.84
- 7.85
- 7.86
- 7.87
- 7.88
- 7.89
- 7.9
- 7.91
- 7.92
- 7.93
- 7.94
- 7.95
- 7.96
- 7.97
- 7.98
- 7.99
-
8～8.9
- 8
- 8.01
- 8.02
- 8.1
- 8.15
- 8.2
- 8.21
- 8.25
- 8.3
- 8.4
- 8.5
- 8.6
- 8.7
- 8.75
- 8.8
- 8.9
-
9～9.99
- 9
- 9.01
- 9.02
- 9.03
- 9.04
- 9.05
- 9.06
- 9.07
- 9.08
- 9.09
- 9.1
- 9.11
- 9.12
- 9.13
- 9.14
- 9.15
- 9.16
- 9.17
- 9.18
- 9.19
- 9.2
- 9.21
- 9.22
- 9.23
- 9.24
- 9.25
- 9.26
- 9.27
- 9.28
- 9.29
- 9.3
- 9.31
- 9.32
- 9.33
- 9.34
- 9.35
- 9.36
- 9.37
- 9.38
- 9.39
- 9.4
- 9.41
- 9.42
- 9.43
- 9.44
- 9.45
- 9.46
- 9.47
- 9.48
- 9.49
- 9.5
- 9.51
- 9.52
- 9.53
- 9.54
- 9.55
- 9.56
- 9.57
- 9.58
- 9.59
- 9.6
- 9.61
- 9.62
- 9.63
- 9.64
- 9.65
- 9.66
- 9.67
- 9.68
- 9.69
- 9.7
- 9.71
- 9.72
- 9.73
- 9.74
- 9.75
- 9.76
- 9.77
- 9.78
- 9.79
- 9.8
- 9.81
- 9.82
- 9.83
- 9.84
- 9.85
- 9.86
- 9.87
- 9.88
- 9.89
- 9.9
- 9.91
- 9.92
- 9.93
- 9.94
- 9.95
- 9.96
- 9.97
- 9.98
- 9.99
-
10～10.9
- 10
- 10.1
- 10.15
- 10.2
- 10.3
- 10.4
- 10.5
- 10.6
- 10.7
- 10.8
- 10.9
-
11～11.99
- 11
- 11.01
- 11.02
- 11.03
- 11.04
- 11.05
- 11.06
- 11.07
- 11.08
- 11.09
- 11.1
- 11.11
- 11.12
- 11.13
- 11.14
- 11.15
- 11.16
- 11.17
- 11.18
- 11.19
- 11.2
- 11.21
- 11.22
- 11.23
- 11.24
- 11.25
- 11.26
- 11.27
- 11.28
- 11.29
- 11.3
- 11.31
- 11.32
- 11.33
- 11.34
- 11.35
- 11.36
- 11.37
- 11.38
- 11.39
- 11.4
- 11.41
- 11.42
- 11.43
- 11.44
- 11.45
- 11.46
- 11.47
- 11.48
- 11.49
- 11.5
- 11.51
- 11.52
- 11.53
- 11.54
- 11.55
- 11.56
- 11.57
- 11.58
- 11.59
- 11.6
- 11.61
- 11.62
- 11.63
- 11.64
- 11.65
- 11.66
- 11.67
- 11.68
- 11.69
- 11.7
- 11.71
- 11.72
- 11.73
- 11.74
- 11.75
- 11.76
- 11.77
- 11.78
- 11.79
- 11.8
- 11.81
- 11.82
- 11.83
- 11.84
- 11.85
- 11.86
- 11.87
- 11.88
- 11.89
- 11.9
- 11.91
- 11.92
- 11.93
- 11.94
- 11.95
- 11.96
- 11.97
- 11.98
- 11.99
-
12～12.9
- 12
- 12.1
- 12.2
- 12.3
- 12.4
- 12.5
- 12.6
- 12.7
- 12.8
- 12.9
-
13～13.9
- 13
- 13.1
- 13.2
- 13.3
- 13.4
- 13.5
- 13.6
- 13.7
- 13.8
- 13.9
-
14～14.9
- 14
- 14.1
- 14.2
- 14.3
- 14.4
- 14.5
- 14.6
- 14.7
- 14.8
- 14.9
-
15～15.99
- 15
- 15.1
- 15.2
- 15.3
- 15.4
- 15.5
- 15.51
- 15.52
- 15.53
- 15.54
- 15.55
- 15.56
- 15.57
- 15.58
- 15.59
- 15.6
- 15.61
- 15.62
- 15.63
- 15.64
- 15.65
- 15.66
- 15.67
- 15.68
- 15.69
- 15.7
- 15.71
- 15.72
- 15.73
- 15.74
- 15.75
- 15.76
- 15.77
- 15.78
- 15.79
- 15.8
- 15.81
- 15.82
- 15.83
- 15.84
- 15.85
- 15.86
- 15.87
- 15.88
- 15.89
- 15.9
- 15.91
- 15.92
- 15.93
- 15.94
- 15.95
- 15.96
- 15.97
- 15.98
- 15.99
-
16～16.9
- 16
- 16.1
- 16.2
- 16.3
- 16.4
- 16.5
- 16.6
- 16.7
- 16.8
- 16.9
-
17～17.9
- 17
- 17.1
- 17.2
- 17.3
- 17.4
- 17.5
- 17.6
- 17.7
- 17.8
- 17.9
-
18～18.9
- 18
- 18.1
- 18.2
- 18.3
- 18.4
- 18.5
- 18.6
- 18.7
- 18.8
- 18.9
-
19～19.99
- 19
- 19..5
- 19.1
- 19.2
- 19.3
- 19.4
- 19.5
- 19.51
- 19.52
- 19.53
- 19.54
- 19.55
- 19.56
- 19.57
- 19.58
- 19.59
- 19.6
- 19.61
- 19.62
- 19.63
- 19.64
- 19.65
- 19.66
- 19.67
- 19.68
- 19.69
- 19.7
- 19.71
- 19.72
- 19.73
- 19.74
- 19.75
- 19.76
- 19.77
- 19.78
- 19.79
- 19.8
- 19.81
- 19.82
- 19.83
- 19.84
- 19.85
- 19.86
- 19.87
- 19.88
- 19.89
- 19.9
- 19.91
- 19.92
- 19.93
- 19.94
- 19.95
- 19.96
- 19.97
- 19.98
- 19.99
-
20～20.5
- 20
- 20.5
-
21～21.5
- 21
- 21.5
-
22～22.5
- 22
- 22.5
-
23～23.5
- 23
- 23.5
-
24～24.5
- 24
- 24.5
-
25～25.5
- 25
- 25.5
-
26～26.5
- 26
- 26.5
-
27～27.5
- 27
- 27.5
-
28～28.5
- 28
- 28.5
-
29～29.5
- 29
- 29.5
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
-
Blade length (ℓ)(mm)
-
0.01～0.9
- 0.01
- 0.02
- 0.03
- 0.04
- 0.045
- 0.05
- 0.06
- 0.07
- 0.075
- 0.08
- 0.09
- 0.1
- 0.105
- 0.12
- 0.135
- 0.15
- 0.16
- 0.2
- 0.23
- 0.24
- 0.25
- 0.3
- 0.32
- 0.4
- 0.45
- 0.5
- 0.6
- 0.7
- 0.75
- 0.8
- 0.9
-
1～1.9
- 1
- 1.05
- 1.1
- 1.2
- 1.25
- 1.3
- 1.35
- 1.4
- 1.5
- 1.6
- 1.7
- 1.75
- 1.8
- 1.9
-
2～2.9
- 2
- 2.1
- 2.2
- 2.25
- 2.3
- 2.4
- 2.5
- 2.6
- 2.7
- 2.8
- 2.9
-
3～3.9
- 3
- 3.1
- 3.2
- 3.3
- 3.4
- 3.5
- 3.6
- 3.7
- 3.75
- 3.8
- 3.9
-
4～4.9
- 4
- 4.1
- 4.2
- 4.3
- 4.4
- 4.5
- 4.6
- 4.7
- 4.8
- 4.9
-
5～5.9
- 5
- 5.1
- 5.2
- 5.25
- 5.3
- 5.4
- 5.5
- 5.6
- 5.7
- 5.8
- 5.9
-
6～6.9
- 6
- 6.1
- 6.2
- 6.25
- 6.3
- 6.4
- 6.5
- 6.6
- 6.7
- 6.75
- 6.8
- 6.9
-
7～7.9
- 7
- 7.1
- 7.2
- 7.3
- 7.4
- 7.5
- 7.6
- 7.7
- 7.8
- 7.9
-
8～8.9
- 8
- 8.1
- 8.2
- 8.25
- 8.3
- 8.4
- 8.5
- 8.6
- 8.7
- 8.8
- 8.9
-
9～9.9
- 9
- 9.1
- 9.2
- 9.3
- 9.4
- 9.5
- 9.6
- 9.7
- 9.8
- 9.9
-
10～10.9
- 10
- 10.1
- 10.2
- 10.3
- 10.4
- 10.5
- 10.6
- 10.7
- 10.8
- 10.9
-
11～11.9
- 11
- 11.1
- 11.2
- 11.3
- 11.4
- 11.5
- 11.6
- 11.7
- 11.8
- 11.9
-
12～12.9
- 12
- 12.2
- 12.3
- 12.4
- 12.5
- 12.6
- 12.8
- 12.9
-
13～13.8
- 13
- 13.2
- 13.3
- 13.4
- 13.5
- 13.6
- 13.8
-
14～14.8
- 14
- 14.1
- 14.2
- 14.3
- 14.4
- 14.5
- 14.6
- 14.7
- 14.8
-
15～15.9
- 15
- 15.2
- 15.3
- 15.4
- 15.5
- 15.6
- 15.8
- 15.9
-
16～16.8
- 16
- 16.2
- 16.4
- 16.5
- 16.6
- 16.8
-
17～17.8
- 17
- 17.1
- 17.2
- 17.3
- 17.4
- 17.5
- 17.6
- 17.7
- 17.8
-
18～18.8
- 18
- 18.2
- 18.3
- 18.4
- 18.5
- 18.6
- 18.8
-
19～19.8
- 19
- 19.2
- 19.4
- 19.5
- 19.6
- 19.8
-
20～20.8
- 20
- 20.1
- 20.2
- 20.4
- 20.5
- 20.6
- 20.7
- 20.8
-
21～21.9
- 21
- 21.2
- 21.3
- 21.4
- 21.5
- 21.6
- 21.8
- 21.9
-
22～22.8
- 22
- 22.2
- 22.4
- 22.5
- 22.6
- 22.8
-
23～23.8
- 23
- 23.1
- 23.2
- 23.4
- 23.5
- 23.6
- 23.8
-
24～24.9
- 24
- 24.2
- 24.3
- 24.4
- 24.5
- 24.6
- 24.8
- 24.9
-
25～25.8
- 25
- 25.2
- 25.4
- 25.5
- 25.6
- 25.8
-
26～26.8
- 26
- 26.2
- 26.4
- 26.5
- 26.6
- 26.7
- 26.8
-
27～27.9
- 27
- 27.2
- 27.3
- 27.4
- 27.5
- 27.6
- 27.8
- 27.9
-
28～28.8
- 28
- 28.2
- 28.4
- 28.5
- 28.8
-
29～29.80
- 29
- 29.1
- 29.2
- 29.5
- 29.6
- 29.7
- 29.80
-
30～30.9
- 30
- 30.3
- 30.4
- 30.5
- 30.6
- 30.8
- 30.9
-
31～31.8
- 31
- 31.2
- 31.5
- 31.6
- 31.8
-
32～32.8
- 32
- 32.1
- 32.4
- 32.5
- 32.7
- 32.8
-
33～33.9
- 33
- 33.2
- 33.3
- 33.6
- 33.9
-
34～34.8
- 34
- 34.2
- 34.4
- 34.5
- 34.8
-
35～35.80
- 35
- 35.1
- 35.2
- 35.4
- 35.5
- 35.6
- 35.7
- 35.80
-
36～36.8
- 36
- 36.4
- 36.5
- 36.8
-
37～37.6
- 37
- 37.2
- 37.5
- 37.6
-
38～38.8
- 38
- 38.4
- 38.5
- 38.8
-
39～39.6
- 39
- 39.2
- 39.5
- 39.6
-
40～40.8
- 40
- 40.4
- 40.5
- 40.8
-
41～41.6
- 41
- 41.2
- 41.5
- 41.6
-
42～42.8
- 42
- 42.4
- 42.5
- 42.8
-
43～43.6
- 43
- 43.2
- 43.5
- 43.6
-
44～44.8
- 44
- 44.4
- 44.5
- 44.8
-
45～45.5
- 45
- 45.2
- 45.5
-
46～46.8
- 46
- 46.4
- 46.5
- 46.8
-
47～47.80
- 47
- 47.2
- 47.5
- 47.6
- 47.80
-
48～48.5
- 48
- 48.5
-
49～49.5
- 49
- 49.5
-
50～50.5
- 50
- 50.5
-
51～51.5
- 51
- 51.5
-
52
-
53～53.5
- 53
- 53.5
-
54～54.5
- 54
- 54.5
-
55～55.5
- 55
- 55.5
-
56
-
57.5
-
58～58.5
- 58
- 58.5
-
59～59.5
- 59
- 59.5
-
60～60.50
- 60
- 60.50
-
63
-
64
-
65
-
67
-
70～70.50
- 70
- 70.50
-
75
-
80
-
83
-
85
-
90
-
95
-
100
-
103
-
110
-
115
-
120
-
130
-
150
-
180
-
200
[5-48/1mm Unit(s)]
-
-
Underneck length (ℓ1)(mm)
-
Shank diameter (d)(mm)
-
Number of flutes(sheet)
-
Overall Length (L)(mm)
-
work material
- general steel
- Quenched and tempered steel
- High Hardness Steel-HRC55
- High Hardness Steel-HRC60
- High Hardness Steel-HRC65
- Stainless Steel
- Cast Iron
- Aluminum
- Titanium
- Copper
- Graphite
- Resin
-
Torsion Angle (θ)
-
Machining Application
-
Coating
- For High Hardness (Silicon Group)
- TiAlN
- For General Steels (AlCrN, etc.)
- TiCN
- DLC
- CrN
- Dia Coat
- Non-Coated
- DG
- AlTiN
- BLUE
- TiSiN
- HS
- FX
- X코팅
- TiALN
- DIA
- A+
-
Blade tip shape
-
Type
- Square
- Roughing
- Long-Neck Square
- High Helical
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy