(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.
Tel: 0222-361-1555
Email: cs@misumi.com.vn
8:00 - 17:00 (Mon - Sat)
Search by Category / Brand Tìm theo danh mục, nhãn hiệu
Search by Category Tìm theo danh mục
- Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 6:00 2/3 to 5:00 (ICT) 3/3/2025. We apologize for the inconvenience.
- Thể lệ và Giải thưởng cuộc thi "Thiết kế máy Tự động hóa 2025" do MISUMI Việt Nam tổ chức. Xem chi tiết.
- [Thông báo] Cập nhật địa chỉ kho tập kết hàng hóa tại khu vực miền Nam của MISUMI Việt Nam. Xem chi tiết.
[Announcement] Update on warehouse address in the Southern region of MISUIMI Vietnam. See more.
Carbide Square End Mills（Coating：TiAlN）
[What is a carbide square end mill?]
A type of milling cutter. It is a tool that can perform complicated shaping such as linear or non-linear side surfaces inside grooves and holes, by using a carbide base material, with a cutting edge on the outside or the end surface, and moving the rotated tool in multiple directions. Major Japanese cutting manufacturer products are now expanding their areas of activity in the world manufacturing industry.
Search by specifying the lower class categoryTìm kiếm bằng cách chỉ định danh mục lớp thấp hơn
Square End Mills (Carbide)
Multi-Function Square End Mills (Carbide)
High Helical End Mills (Carbide)
Roughing End Mills (Carbide)
Long Neck Square End Mills (Carbide)
Brand |
|
|---|---|
Filter By |
|
| CAD |
|
| Days to Ship |
|
164 itemsMặt hàng
- Sort By
-
You can add up to 6 items per a category to the compare list.
NACHI(FUJIKOSHI)
Supports a wide range of materials from raw materials to hardened materials. Suitable for finishing grooves and side surfaces.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 1 ～ 18 2.5 ～ 32 - 3 ～ 20 4 38 ～ 100 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] Standard torsion (30-40°) Plane / Side / Groove / Inclined Cuts TiAlN Sharp Edge Square From: 540,666 VND Days to Ship: Số ngày giao hàng: Same day or more 
Same day or more
-
You can add up to 6 items per a category to the compare list.
MHR430 MUGEN-COATING 4-Flute Long Neck End Mill (for Deep Ribbing)
NS TOOL
[Notice] Alterations can now be specified. Please select from "Standard/Alterations Category" of narrowing conditions.[Features]・ MUGEN coating is applied to the original deep rib end mill.・ Neck relief type suitable for narrow deep machining.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 1 ～ 10 1.5 ～ 15 4 ～ 80 4 ～ 10 4 50 ～ 150 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎] Standard torsion (30-40°) Plane / Side / Groove / Inclined Cuts TiAlN With Lead Long-Neck Square From: 758,550 VND Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
MHR230 MUGEN-COATING 2-Flute Long Neck End Mill (for Deep Ribbing)
NS TOOL
[Notice] Alterations can now be specified. Please select from "Standard/Alterations Category" of narrowing conditions.[Features]・ MUGEN coating is applied to the original deep rib end mill.・ Neck relief type suitable for narrow deep machining.・ Available in a total of 217 sizes.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 0.1 ～ 6 0.15 ～ 9 0.3 ～ 60 4 ～ 6 2 45 ～ 120 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎] Standard torsion (30-40°) Plane / Side / Groove / Inclined Cuts TiAlN With Lead Long-Neck Square From: 541,765 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
- On Sale Till 31/03/2025
XAC series carbide square end mill, 4-flute / long model
MISUMI
User friendly TiAlN coated series with long flute length
- Volume Discount
- TiAlN
- General Steel
- 4 Flutes
- L (Long)
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 3 ～ 12 12 ～ 30 - 6 ～ 12 4 50 ～ 90 general steel[○] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] Standard torsion (30-40°) Plane / Side / Inclined Cuts TiAlN Sharp Edge Square From: 671,026 VND Special Price Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
MUGEN-COATING 2-Flute End Mill MSE230
NS TOOL
[Notice] Alterations can now be specified. Please select from "Standard/Alterations Category" of narrowing conditions.[Features]・ MUGEN Coating is used for the 2-flute end mill.・ Capable of universal cutting, from roughing to finishing.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 0.1 ～ 12 0.15 ～ 30 - 4 ～ 12 2 45 ～ 80 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎] Standard torsion (30-40°) Plane / Side / Groove / Inclined Cuts TiAlN With Lead Square From: 379,275 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Carbide Solid End Mill, Long Shank, 6-Flute GM-6EL
KABUSYUUKOUGU
GM Series end mill that has both high hardness and elastic modulus due to the use of carbide material and features the reasonable balance with the good cutting quality. It can extend the tool lifespan.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 6 ～ 20 24 ～ 75 - 6 ～ 20 6 75 ～ 150 general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[◎] Powerful Torsion (45°-60°) Side / Groove TiAlN - Square From: 395,788 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
![Square End Mill [4APE (APE4000)]](//vn.misumi-ec.com/linked/material/fs/AVQ1/PHOTO/223012456128.jpg?$product_view_b$)
Square End Mill [4APE (APE4000)]
HANSONG M&T
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 2 ～ 20 6 ～ 45 - 6 ～ 20 4 45 ～ 100 - 30° - TiAlN - Square From: 868,116 VND Days to Ship: Số ngày giao hàng: 7 Day(s) or more
7 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
![Square End mill [4SUE]](//vn.misumi-ec.com/linked/material/fs/AVQ1/PHOTO/223012456320.jpg?$product_view_b$)
HANSONG M&T
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 1 ～ 20 2.5 ～ 40 - 6 ～ 20 4 50 ～ 100 - 43° - TiAlN - Square From: 954,600 VND Days to Ship: Số ngày giao hàng: 7 Day(s) or more
7 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
ULTRA FX Micro Grain Carbide End Mills TiAlN coated 2 Flutes Short_FX-MG-EDS
OSG
[Notice] Alterations can now be specified. Please select from "Standard/Alterations Category" of narrowing conditions.[Features]・ A general-purpose 2-flute end mill with FX coating that has excellent heat resistance.・ Supports a wide range of machining.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 0.2 ～ 30 0.4 ～ 45 - 3 ～ 32 2 40 ～ 125 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] Standard torsion (30-40°) Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts TiAlN Sharp Edge Square From: 1,429,954 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
ULTRA FX Micro Grain Carbide End Mills TiAlN Corted 2 Flutes for Counterboring_FX-ZDS
OSG
[Notice] Alterations can now be specified. Please select from "Standard/Alterations Category" of narrowing conditions.[Features]・ An end mill dedicated to counter boring. It can be used not only for drilling counterbore holes for hex bolts, but also as a pre-machining tool for drilling on slopes.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 3 ～ 20 8 ～ 38 - 6 ～ 20 2 50 ～ 125 general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] Weak torsion (15 to 25˚) Countersinking TiAlN With Lead Square From: 1,544,642 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
3, 6-Blade 45-Degree Square (SUS-CUT)
YG 1
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 1 ～ 16 2.5 ～ 42 - 6 ～ 16 3 ～ 6 50 ～ 100 general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Titanium[◎] Powerful Torsion (45°-60°) Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts TiAlN - Square From: 656,168 VND Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
XAC series carbide square end mill, 4-flute / short model
MISUMI
[Specification]·Standard TiAlN coating
- Volume Discount
- TiAlN
- General Steel
- 4 Flutes
- S (Short)
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 2 ～ 20 6 ～ 38 - 4 ～ 20 4 40 ～ 105 general steel[○] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] Standard torsion (30-40°) Plane / Side / Inclined Cuts TiAlN Sharp Edge Square From: 384,307 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
GSX MILL 4-Flute Blade 4D GSX4C-4D
NACHI(FUJIKOSHI)
Supports wet processing of raw materials through dry processing of high hardness materials.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 1 ～ 20 4 ～ 80 - 4 ～ 20 4 40 ～ 140 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] Standard torsion (30-40°) Plane / Side / Groove / Inclined Cuts TiAlN With Lead Square From: 840,386 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
ULTRA FX SUPER Micro Grain Carbide End Mills TiAlN coated Standard Speed Multi-Purpose_FXS-HPE
OSG
Since it has a long shank, it enables high-efficiency machining even when working on wall grooves, with no concern required for interference.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 10 ～ 14 15 ～ 21 - 8 ～ 12 4 130 ～ 160 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Titanium[○] Powerful Torsion (45°-60°) Plane / Side / Groove / Inclined Cuts TiAlN With Lead Square From: 3,242,922 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
YG 1
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 3 ～ 25 8 ～ 50 - 6 ～ 25 3 ～ 5 50 ～ 100 general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] Weak torsion (15 to 25˚) Plane / Side / Groove / Inclined Cuts TiAlN - Long-Neck Square From: 986,171 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
YG 1
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 3 ～ 20 - - 6 ～ 20 3 ～ 5 - general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Titanium[◎] - Plane / Side / Groove / Inclined Cuts TiAlN - Roughing From: 491,283 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
![4-Flute Short (Strong Heavy Cutting Type), WX-PHS [Alterations Available]](//vn.misumi-ec.com/linked/material/fs/OSG1/PHOTO/223000432310.jpg?$product_view_b$)
4-Flute Short (Strong Heavy Cutting Type), WX-PHS [Alterations Available]
OSG
[Notice] Alterations can now be specified. Please select from "Standard/Alterations Category" of narrowing conditions.[Features]・ A high helix end mill that achieves both high cutting chip discharge and cutting edge rigidity. Highly efficient heavy cutting is possible not only for side cutting but also for groove cutting.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 4 ～ 6 11 ～ 13 - 6 4 60 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[◎] / Copper[○] Powerful Torsion (45°-60°) Plane / Side / Groove / Inclined Cuts TiAlN With Lead Square From: 1,810,000 VND Days to Ship: Số ngày giao hàng: 15 Day(s)
15 Day(s)
-
You can add up to 6 items per a category to the compare list.
MUGEN-COATING 4-Flute End Mill MSE445
NS TOOL
[Notice] Alterations can now be specified. Please select from "Standard/Alterations Category" of narrowing conditions.[Features]・ MUGEN coating is used for the 4-flute end mill.・ Cutting force is reduced compared to 30° helix angle.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 2 ～ 12 5 ～ 30 - 4 ～ 12 4 45 ～ 80 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / High Hardness Steel-HRC65[○] / Stainless Steel[◎] / Aluminum[◎] / Titanium[◎] / Copper[◎] / Resin[◎] Powerful Torsion (45°-60°) Plane / Side / Groove / Inclined Cuts TiAlN With Lead Square From: 902,942 VND Days to Ship: Số ngày giao hàng: 8 Day(s) or more
8 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
OSG
As the corrugated blade shape reduces cutting power, large cutting depth is possible. Also resilient to chatter, it is possible to improve the efficiency of roughing.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 7 ～ 25 16 ～ 45 - 8 ～ 25 4 ～ 6 60 ～ 120 general steel[○/◎] / Quenched and tempered steel[○/◎] / Stainless Steel[○/◎] / Cast Iron[○/◎] / Aluminum[○] / Titanium[○/◎] / Copper[○] Standard torsion (30-40°) / Powerful Torsion (45°-60°) Plane / Side / Inclined Cuts TiAlN C plane Roughing From: 3,367,395 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
YG 1
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 10 22 - 10 5 70 general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Titanium[◎] Standard torsion (30-40°) Plane / Side / Groove / Inclined Cuts TiAlN - Long-Neck Square From: 1,399,750 VND Days to Ship: Số ngày giao hàng: 6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
Coated (TiAIN) Solid Carbide End Mills (2 Flutes) IC2SSV
THE CUT
[Features]· Gash land· Outstanding cost performance.· Capable of machining a wide range of workpieces from raw materials up to alloy steel.· TiAlN coated for a longer tool life.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 1 ～ 30 2.5 ～ 55 - 4 ～ 32 2 40 ～ 130 general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] Standard torsion (30-40°) Side / Groove TiAlN - Square From: 366,803 VND Days to Ship: Số ngày giao hàng: 7 Day(s) or more
7 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
GSX MILL 4-Flute Blade 3D GSX4C-3D
NACHI(FUJIKOSHI)
Supports wet processing of raw materials through dry processing of high hardness materials.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 1 ～ 20 3 ～ 60 - 4 ～ 20 4 40 ～ 120 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] Standard torsion (30-40°) Plane / Side / Groove / Inclined Cuts TiAlN With Lead Square From: 589,568 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
GS MILL Long Neck, 2-Flute GSN2
NACHI(FUJIKOSHI)
Ideal for fine machining of molds. Available in various sizes and can be used for all kinds of machining.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 0.2 ～ 6 0.3 ～ 9 0.5 ～ 60 4 ～ 6 2 45 ～ 120 general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] Standard torsion (30-40°) Plane / Side / Groove / Inclined Cuts TiAlN Sharp Edge Long-Neck Square From: 783,927 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
MSE430 MUGEN-COATING 4-Flute End Mill
NS TOOL
[Notice] Alterations can now be specified. Please select from "Standard/Alterations Category" of narrowing conditions.[Features]・ MUGEN coating is used for the 4-flute end mill.・ A wide range of cutting is possible from raw materials to high hardness materials.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 1 ～ 12 2.5 ～ 30 - 4 ～ 12 4 45 ～ 80 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎] Standard torsion (30-40°) Plane / Side / Inclined Cuts TiAlN With Lead Square From: 577,962 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
MX435 MUGEN-COATING 4-Flute LEAD 35 End Mill
NS TOOL
[Notice] Alterations can now be specified. Please select from "Standard/Alterations Category" of narrowing conditions.[Features]・ The flute length is 3 times the cutting diameter and features a 35° helix angle.・ Eliminates the problem that the 2 × D flute length is not enough and the 4 × D flute length is long.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 1 ～ 12 3 ～ 36 - 4 ～ 12 4 45 ～ 80 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎] Standard torsion (30-40°) Plane / Side / Groove / Inclined Cuts TiAlN With Lead Square From: 577,962 VND Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
Carbide Miniature End Mill KMSEA-2
KYOWA SEIKO
[Applications]It can be used for flat surface, side, groove, plunge (Z feed), inclined cutting, and counterbore machining. [Features]Using carbide materials with high hardness, it is possible to cut general steel, heat-treated steel, stainless steel and cast iron.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 0.1 ～ 3 0.2 ～ 8 - 3 2 50 general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] Standard torsion (30-40°) Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking TiAlN Sharp Edge Square From: 1,546,412 VND Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
2, 4-Flute Square End Mill (SUS-CUT)
YG 1
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 1 ～ 20 2.5 ～ 48 - 6 ～ 20 2 ～ 4 50 ～ 100 general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Titanium[◎] Standard torsion (30-40°) Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts TiAlN - Long-Neck Square From: 506,516 VND Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
4-Blade Pin Square Sander, EM Long
WIDIN
[Features]· Long four-blade pin square sander EM.· Supports flexible material and aluminum alloy.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 5 ～ 16 25 ～ 80 - 6 ～ 16 - 100 ～ 200 general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] Standard torsion (30-40°) Side / Groove / Plunging (Z feed) TiAlN Sharp Edge High Helical From: 1,137,635 VND Days to Ship: Số ngày giao hàng: 8 Day(s) or more
8 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Carbide Solid End Mill 4-Flute GM-4E
KABUSYUUKOUGU
GM Series end mill that has both high hardness and elastic modulus due to the use of carbide material and features the reasonable balance with the good cutting quality. It can extend the tool lifespan.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 1 ～ 20 3 ～ 45 - 4 ～ 20 4 50 ～ 100 general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[◎] Powerful Torsion (45°-60°) Side / Groove TiAlN - Square From: 201,796 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
MUGEN-COATING 2-Flute Super Short End Mill MSE230SS
NS TOOL
[Features]・ It adopts NS TOOL'S unique infinite coating on the 2-flute end mill.・ Capable of universal cutting, from roughing to finishing.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 0.15 ～ 5.9 0.1 ～ 5.9 - - - 55 general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎] Standard torsion (30-40°) Plane / Side / Groove TiAlN - Square From: 963,700 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
![Rib Square End Mill [2ARE (APRE)]](//vn.misumi-ec.com/linked/material/fs/AVQ1/PHOTO/223012456094.jpg?$product_view_b$)
Rib Square End Mill [2ARE (APRE)]
HANSONG M&T
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 0.4 ～ 4 0.6 ～ 6 1 ～ 25 4 ～ 6 2 45 ～ 65 - 30° - TiAlN - Long-Neck Square From: 845,782 VND Days to Ship: Số ngày giao hàng: 7 Day(s) or more
7 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
XAC series carbide square end mill, 2-flute / short model
MISUMI
[Specification]·Standard TiAlN coating
- Volume Discount
- TiAlN
- General Steel
- 2 Flutes
- S (Short)
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 1 ～ 20 2.5 ～ 38 - 4 ～ 20 2 40 ～ 105 general steel[○] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] Standard torsion (30-40°) Plane / Side / Groove / Inclined Cuts TiAlN Sharp Edge Square From: 349,901 VND Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
NACHI(FUJIKOSHI)
The GS hard coating makes it ideal for ultra-high-speed machining of high-hardness materials.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 1 ～ 20 3 ～ 38 - 6 ～ 20 4 ～ 8 50 ～ 100 Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] Powerful Torsion (45°-60°) Plane / Side / Groove / Inclined Cuts TiAlN With Lead Square From: 1,340,625 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
NACHI(FUJIKOSHI)
Capable of high-speed and high-efficiency roughing of materials from steel to stainless steel.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 6 ～ 20 13 ～ 38 - 6 ～ 20 4 50 ～ 100 general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] Standard torsion (30-40°) Plane / Side / Groove / Inclined Cuts TiAlN With Lead Roughing From: 2,136,177 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
NACHI(FUJIKOSHI)
Capable of continuous high-efficiency machining from drilling to grooving. Optimal for thin plates and small machines with low clamping force.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 3 ～ 16 8 ～ 32 - 6 ～ 16 3 50 ～ 115 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] Standard torsion (30-40°) Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts TiAlN With Lead Square From: 1,070,744 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
NACHI(FUJIKOSHI)
Capable of high-feed and high-efficiency groove machining. Supports a wide range of applications from mold steel to difficult-to-cut materials.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 2 ～ 32 6 ～ 70 - 4 ～ 32 4 50 ～ 175 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] Standard torsion (30-40°) Plane / Side / Groove / Inclined Cuts TiAlN With Lead Square From: 1,325,103 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
NACHI(FUJIKOSHI)
Supports a wide range of applications from raw materials to high hardness steel.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 2 ～ 20 10 ～ 56 - 4 ～ 20 4 50 ～ 125 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] Standard torsion (30-40°) Plane / Side / Groove / Inclined Cuts TiAlN With Lead Square From: 1,563,133 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
NACHI(FUJIKOSHI)
Supports a wide range of materials from raw materials to hardened materials. Suitable for side surface machining.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 2 ～ 25 6 ～ 45 - 4 ～ 25 4 40 ～ 120 Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] Standard torsion (30-40°) Plane / Side / Groove / Inclined Cuts TiAlN Sharp Edge Square From: 1,554,693 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
ULTRA WX Micro Grain Carbide End Mills TiAlN coated 2 Flutes Stub (Corner Protect Type)_WX-G-EDSS
OSG
Heavy duty type 2-flute end mill with reinforced bottom blade corner. Capable of heavy cutting thanks to its rigid short blade length. Enables reductions in lead time during mass production machining.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 1 ～ 12 1.5 ～ 18 - 4 ～ 12 2 40 ～ 75 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] Standard torsion (30-40°) Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts TiAlN With Lead Square From: 591,666 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
ULTRA WX Micro Grain Carbide End Mills TiAlN Coated 3 Flutes Stub for Slotting_WX-SHTSS
OSG
[Notice] Alterations can now be specified. Please select from "Standard/Alterations Category" of narrowing conditions.[Features]・ This is an end mill that allows continuous grooving after drilling without pre-machining. The number of tools in the magazine can be reduced.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 3 ～ 12 4.5 ～ 18 - 6 ～ 12 3 50 ～ 75 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] Powerful Torsion (45°-60°) Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts TiAlN With Lead Square From: 1,342,414 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
OSG
A multi-functional end mill which minimizes chatter to allow highly efficient machining of grooves and side walls.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 3 ～ 12 8 ～ 26 - 6 ～ 12 4 60 ～ 100 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[◎] / Copper[○] Standard torsion (30-40°) Plane / Side / Groove / Inclined Cuts TiAlN With Lead Square From: 1,526,937 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
![4-Flute Medium Type WX-PHN [Alterations Available]](//vn.misumi-ec.com/linked/material/fs/OSG1/PHOTO/223000432332.jpg?$product_view_b$)
4-Flute Medium Type WX-PHN [Alterations Available]
OSG
[Notice] Alterations can now be specified. Please select from "Standard/Alterations Category" of narrowing conditions.[Features]・ A medium flute length type with a high helix end mill that achieves a high level of cutting chip discharge and cutting edge rigidity. Compatible with a wide range of work materials.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 3 ～ 5 10 ～ 17 - 6 4 60 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[◎] / Copper[○] Powerful Torsion (45°-60°) Plane / Side / Groove / Inclined Cuts TiAlN With Lead Square From: 1,713,427 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Micro Grain Carbide End Mills Multiple Flutes Short_NEO-EMS
OSG
[Notice] Alterations can now be specified. Please select from "Standard/Alterations Category" of narrowing conditions.[Features]・ The advanced "unequal lead" effect suppresses chatter and realizes amazing high efficiency machining.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 6 ～ 25 12 ～ 50 - 6 ～ 25 6 50 ～ 120 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Titanium[◎] Standard torsion (30-40°) Plane / Side TiAlN With Lead Square From: 2,066,735 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
OSG
[Notice] Alterations can now be specified. Please select from "Standard/Alterations Category" of narrowing conditions.[Features]・ An end mill long neck type for high-speed machining that brings out the full performance of a high-speed, high-precision machining center.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 1 ～ 6 1.5 ～ 9 5 ～ 30 6 4 60 ～ 90 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] Standard torsion (30-40°) Plane / Side / Groove / Inclined Cuts TiAlN Sharp Edge / With Lead Long-Neck Square From: 1,933,753 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
ULTRA WX Micro Grain Carbide End Mills TiAIN coated 4 Flutes Long Neck Short_WX-LN-EMS
OSG
[Notice] Alterations can now be specified. Please select from "Standard/Alterations Category" of narrowing conditions.[Features]・ Long neck type 4-flute end mill that can machine narrow and deep parts. The bottom flute is designed to have stronger corners.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 1 ～ 10 1.5 ～ 15 4 ～ 80 4 ～ 10 4 45 ～ 150 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] Standard torsion (30-40°) Plane / Side / Groove / Inclined Cuts TiAlN With Lead Long-Neck Square From: 1,216,317 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
![Square End Mill [4APE (APE4000)]](http://vn.misumi-ec.com/linked/material/fs/AVQ1/PHOTO/223012456128.jpg?$product_view_b$)
![Square End mill [4SUE]](http://vn.misumi-ec.com/linked/material/fs/AVQ1/PHOTO/223012456320.jpg?$product_view_b$)
![4-Flute Short (Strong Heavy Cutting Type), WX-PHS [Alterations Available]](http://vn.misumi-ec.com/linked/material/fs/OSG1/PHOTO/223000432310.jpg?$product_view_b$)
![Rib Square End Mill [2ARE (APRE)]](http://vn.misumi-ec.com/linked/material/fs/AVQ1/PHOTO/223012456094.jpg?$product_view_b$)
![4-Flute Medium Type WX-PHN [Alterations Available]](http://vn.misumi-ec.com/linked/material/fs/OSG1/PHOTO/223000432332.jpg?$product_view_b$)
| BrandNhãn hiệu |
|---|
| Product SeriesDòng sản phẩm |
| From |
| Days to ShipSố ngày giao hàng |
| SpecificationsĐặc điểm kĩ thuật |
| Blade diameter (D)(φ) |
| Blade length (ℓ)(mm) |
| Underneck length (ℓ1)(mm) |
| Shank diameter (d)(mm) |
| Number of flutes(sheet) |
| Overall Length (L)(mm) |
| work material |
| Torsion Angle (θ) |
| Machining Application |
| Coating |
| Blade tip shape |
| Type |
You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list. 
| You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list. ![Square End Mill [4APE (APE4000)]](http://vn.misumi-ec.com/linked/material/fs/AVQ1/PHOTO/223012456128.jpg?$product_view_c$) | You can add up to 6 items per a category to the compare list. ![Square End mill [4SUE]](http://vn.misumi-ec.com/linked/material/fs/AVQ1/PHOTO/223012456320.jpg?$product_view_c$) | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list. ![4-Flute Short (Strong Heavy Cutting Type), WX-PHS [Alterations Available]](http://vn.misumi-ec.com/linked/material/fs/OSG1/PHOTO/223000432310.jpg?$product_view_c$) | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list. ![Rib Square End Mill [2ARE (APRE)]](http://vn.misumi-ec.com/linked/material/fs/AVQ1/PHOTO/223012456094.jpg?$product_view_c$) | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list. ![4-Flute Medium Type WX-PHN [Alterations Available]](http://vn.misumi-ec.com/linked/material/fs/OSG1/PHOTO/223000432332.jpg?$product_view_c$) | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | |
| BrandNhãn hiệu | NACHI(FUJIKOSHI) | NS TOOL | NS TOOL | MISUMI | NS TOOL | KABUSYUUKOUGU | HANSONG M&T | HANSONG M&T | OSG | OSG | YG 1 | MISUMI | NACHI(FUJIKOSHI) | OSG | YG 1 | YG 1 | OSG | NS TOOL | OSG | YG 1 | THE CUT | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NS TOOL | NS TOOL | KYOWA SEIKO | YG 1 | WIDIN | KABUSYUUKOUGU | NS TOOL | HANSONG M&T | MISUMI | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | OSG | OSG | OSG | OSG | OSG | OSG | OSG |
| Product SeriesDòng sản phẩm | MHR430 MUGEN-COATING 4-Flute Long Neck End Mill (for Deep Ribbing) | MHR230 MUGEN-COATING 2-Flute Long Neck End Mill (for Deep Ribbing) | ULTRA FX Micro Grain Carbide End Mills TiAlN coated 2 Flutes Short_FX-MG-EDS | ULTRA FX Micro Grain Carbide End Mills TiAlN Corted 2 Flutes for Counterboring_FX-ZDS | ULTRA FX SUPER Micro Grain Carbide End Mills TiAlN coated Standard Speed Multi-Purpose_FXS-HPE | 4-Flute Short (Strong Heavy Cutting Type), WX-PHS [Alterations Available] | ULTRA WX Micro Grain Carbide End Mills TiAlN coated 2 Flutes Stub (Corner Protect Type)_WX-G-EDSS | ULTRA WX Micro Grain Carbide End Mills TiAlN Coated 3 Flutes Stub for Slotting_WX-SHTSS | ULTRA WX Micro Grain Carbide End Mills TiAIN coated 4 Flutes Long Neck Short_WX-LN-EMS | ||||||||||||||||||||||||||||||||||||
| From | 540,666 VND | 758,550 VND | 541,765 VND | 671,026 VND Special Price On Sale Till 31/03/2025 | 379,275 VND | 395,788 VND | 868,116 VND | 954,600 VND | 1,429,954 VND | 1,544,642 VND | 656,168 VND | 384,307 VND | 840,386 VND | 3,242,922 VND | 986,171 VND | 491,283 VND | 1,810,000 VND | 902,942 VND | 3,367,395 VND | 1,399,750 VND | 366,803 VND | 589,568 VND | 783,927 VND | 577,962 VND | 577,962 VND | 1,546,412 VND | 506,516 VND | 1,137,635 VND | 201,796 VND | 963,700 VND | 845,782 VND | 349,901 VND | 1,340,625 VND | 2,136,177 VND | 1,070,744 VND | 1,325,103 VND | 1,563,133 VND | 1,554,693 VND | 591,666 VND | 1,342,414 VND | 1,526,937 VND | 1,713,427 VND | 2,066,735 VND | 1,933,753 VND | 1,216,317 VND |
| Days to ShipSố ngày giao hàng | Same day or more | Same day or more | 6 Day(s) or more | Same day or more | 6 Day(s) or more | 4 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | Same day or more | 4 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 15 Day(s) | 8 Day(s) or more | 6 Day(s) or more | 6 Day(s) | 7 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | Same day or more | Same day or more | Same day or more | 8 Day(s) or more | 4 Day(s) or more | 6 Day(s) or more | 7 Day(s) or more | Same day or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 4 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more |
| SpecificationsĐặc điểm kĩ thuật |
|
|
| ||||||||||||||||||||||||||||||||||||||||||
| Blade diameter (D)(φ) | 1 ～ 18 | 1 ～ 10 | 0.1 ～ 6 | 3 ～ 12 | 0.1 ～ 12 | 6 ～ 20 | 2 ～ 20 | 1 ～ 20 | 0.2 ～ 30 | 3 ～ 20 | 1 ～ 16 | 2 ～ 20 | 1 ～ 20 | 10 ～ 14 | 3 ～ 25 | 3 ～ 20 | 4 ～ 6 | 2 ～ 12 | 7 ～ 25 | 10 | 1 ～ 30 | 1 ～ 20 | 0.2 ～ 6 | 1 ～ 12 | 1 ～ 12 | 0.1 ～ 3 | 1 ～ 20 | 5 ～ 16 | 1 ～ 20 | 0.15 ～ 5.9 | 0.4 ～ 4 | 1 ～ 20 | 1 ～ 20 | 6 ～ 20 | 3 ～ 16 | 2 ～ 32 | 2 ～ 20 | 2 ～ 25 | 1 ～ 12 | 3 ～ 12 | 3 ～ 12 | 3 ～ 5 | 6 ～ 25 | 1 ～ 6 | 1 ～ 10 |
| Blade length (ℓ)(mm) | 2.5 ～ 32 | 1.5 ～ 15 | 0.15 ～ 9 | 12 ～ 30 | 0.15 ～ 30 | 24 ～ 75 | 6 ～ 45 | 2.5 ～ 40 | 0.4 ～ 45 | 8 ～ 38 | 2.5 ～ 42 | 6 ～ 38 | 4 ～ 80 | 15 ～ 21 | 8 ～ 50 | - | 11 ～ 13 | 5 ～ 30 | 16 ～ 45 | 22 | 2.5 ～ 55 | 3 ～ 60 | 0.3 ～ 9 | 2.5 ～ 30 | 3 ～ 36 | 0.2 ～ 8 | 2.5 ～ 48 | 25 ～ 80 | 3 ～ 45 | 0.1 ～ 5.9 | 0.6 ～ 6 | 2.5 ～ 38 | 3 ～ 38 | 13 ～ 38 | 8 ～ 32 | 6 ～ 70 | 10 ～ 56 | 6 ～ 45 | 1.5 ～ 18 | 4.5 ～ 18 | 8 ～ 26 | 10 ～ 17 | 12 ～ 50 | 1.5 ～ 9 | 1.5 ～ 15 |
| Underneck length (ℓ1)(mm) | - | 4 ～ 80 | 0.3 ～ 60 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 0.5 ～ 60 | - | - | - | - | - | - | - | 1 ～ 25 | - | - | - | - | - | - | - | - | - | - | - | - | 5 ～ 30 | 4 ～ 80 |
| Shank diameter (d)(mm) | 3 ～ 20 | 4 ～ 10 | 4 ～ 6 | 6 ～ 12 | 4 ～ 12 | 6 ～ 20 | 6 ～ 20 | 6 ～ 20 | 3 ～ 32 | 6 ～ 20 | 6 ～ 16 | 4 ～ 20 | 4 ～ 20 | 8 ～ 12 | 6 ～ 25 | 6 ～ 20 | 6 | 4 ～ 12 | 8 ～ 25 | 10 | 4 ～ 32 | 4 ～ 20 | 4 ～ 6 | 4 ～ 12 | 4 ～ 12 | 3 | 6 ～ 20 | 6 ～ 16 | 4 ～ 20 | - | 4 ～ 6 | 4 ～ 20 | 6 ～ 20 | 6 ～ 20 | 6 ～ 16 | 4 ～ 32 | 4 ～ 20 | 4 ～ 25 | 4 ～ 12 | 6 ～ 12 | 6 ～ 12 | 6 | 6 ～ 25 | 6 | 4 ～ 10 |
| Number of flutes(sheet) | 4 | 4 | 2 | 4 | 2 | 6 | 4 | 4 | 2 | 2 | 3 ～ 6 | 4 | 4 | 4 | 3 ～ 5 | 3 ～ 5 | 4 | 4 | 4 ～ 6 | 5 | 2 | 4 | 2 | 4 | 4 | 2 | 2 ～ 4 | - | 4 | - | 2 | 2 | 4 ～ 8 | 4 | 3 | 4 | 4 | 4 | 2 | 3 | 4 | 4 | 6 | 4 | 4 |
| Overall Length (L)(mm) | 38 ～ 100 | 50 ～ 150 | 45 ～ 120 | 50 ～ 90 | 45 ～ 80 | 75 ～ 150 | 45 ～ 100 | 50 ～ 100 | 40 ～ 125 | 50 ～ 125 | 50 ～ 100 | 40 ～ 105 | 40 ～ 140 | 130 ～ 160 | 50 ～ 100 | - | 60 | 45 ～ 80 | 60 ～ 120 | 70 | 40 ～ 130 | 40 ～ 120 | 45 ～ 120 | 45 ～ 80 | 45 ～ 80 | 50 | 50 ～ 100 | 100 ～ 200 | 50 ～ 100 | 55 | 45 ～ 65 | 40 ～ 105 | 50 ～ 100 | 50 ～ 100 | 50 ～ 115 | 50 ～ 175 | 50 ～ 125 | 40 ～ 120 | 40 ～ 75 | 50 ～ 75 | 60 ～ 100 | 60 | 50 ～ 120 | 60 ～ 90 | 45 ～ 150 |
| work material | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎] | general steel[○] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[◎] | - | - | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Titanium[◎] | general steel[○] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Titanium[○] | general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Titanium[◎] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[◎] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / High Hardness Steel-HRC65[○] / Stainless Steel[◎] / Aluminum[◎] / Titanium[◎] / Copper[◎] / Resin[◎] | general steel[○/◎] / Quenched and tempered steel[○/◎] / Stainless Steel[○/◎] / Cast Iron[○/◎] / Aluminum[○] / Titanium[○/◎] / Copper[○] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Titanium[◎] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] | general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Titanium[◎] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[◎] | general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎] | - | general steel[○] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] | Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[◎] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[◎] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Titanium[◎] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] |
| Torsion Angle (θ) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Powerful Torsion (45°-60°) | 30° | 43° | Standard torsion (30-40°) | Weak torsion (15 to 25˚) | Powerful Torsion (45°-60°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Powerful Torsion (45°-60°) | Weak torsion (15 to 25˚) | - | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Standard torsion (30-40°) / Powerful Torsion (45°-60°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Powerful Torsion (45°-60°) | Standard torsion (30-40°) | 30° | Standard torsion (30-40°) | Powerful Torsion (45°-60°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Powerful Torsion (45°-60°) | Standard torsion (30-40°) | Powerful Torsion (45°-60°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) |
| Machining Application | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Side / Groove | - | - | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Countersinking | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Side / Groove | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Side / Groove / Plunging (Z feed) | Side / Groove | Plane / Side / Groove | - | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts |
| Coating | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN |
| Blade tip shape | Sharp Edge | With Lead | With Lead | Sharp Edge | With Lead | - | - | - | Sharp Edge | With Lead | - | Sharp Edge | With Lead | With Lead | - | - | With Lead | With Lead | C plane | - | - | With Lead | Sharp Edge | With Lead | With Lead | Sharp Edge | - | Sharp Edge | - | - | - | Sharp Edge | With Lead | With Lead | With Lead | With Lead | With Lead | Sharp Edge | With Lead | With Lead | With Lead | With Lead | With Lead | Sharp Edge / With Lead | With Lead |
| Type | Square | Long-Neck Square | Long-Neck Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Long-Neck Square | Roughing | Square | Square | Roughing | Long-Neck Square | Square | Square | Long-Neck Square | Square | Square | Square | Long-Neck Square | High Helical | Square | Square | Long-Neck Square | Square | Square | Roughing | Square | Square | Square | Square | Square | Square | Square | Square | Square | Long-Neck Square | Long-Neck Square |
Loading...Tải…
ConfigureTạo
Specification/DimensionsĐặc điểm kỹ thuật / Kích thướcĐặc điểm kỹ thuật / Kích thước
-
Blade diameter (D)(φ)
-
0.01～0.99
- 0.01
- 0.02
- 0.03
- 0.04
- 0.05
- 0.06
- 0.07
- 0.08
- 0.09
- 0.1
- 0.11
- 0.12
- 0.13
- 0.14
- 0.15
- 0.16
- 0.17
- 0.18
- 0.19
- 0.2
- 0.21
- 0.22
- 0.23
- 0.24
- 0.25
- 0.26
- 0.27
- 0.28
- 0.29
- 0.3
- 0.31
- 0.32
- 0.33
- 0.34
- 0.35
- 0.36
- 0.37
- 0.38
- 0.39
- 0.4
- 0.41
- 0.42
- 0.43
- 0.44
- 0.45
- 0.46
- 0.47
- 0.48
- 0.49
- 0.5
- 0.51
- 0.52
- 0.53
- 0.54
- 0.55
- 0.56
- 0.57
- 0.58
- 0.59
- 0.6
- 0.61
- 0.62
- 0.63
- 0.64
- 0.65
- 0.66
- 0.67
- 0.68
- 0.69
- 0.7
- 0.71
- 0.72
- 0.73
- 0.74
- 0.75
- 0.76
- 0.77
- 0.78
- 0.79
- 0.8
- 0.81
- 0.82
- 0.83
- 0.84
- 0.85
- 0.86
- 0.87
- 0.88
- 0.89
- 0.9
- 0.91
- 0.92
- 0.93
- 0.94
- 0.95
- 0.96
- 0.97
- 0.98
- 0.99
-
1～1.99
- 1
- 1.01
- 1.02
- 1.03
- 1.04
- 1.05
- 1.06
- 1.07
- 1.08
- 1.09
- 1.1
- 1.11
- 1.12
- 1.13
- 1.14
- 1.15
- 1.16
- 1.17
- 1.18
- 1.19
- 1.2
- 1.21
- 1.22
- 1.23
- 1.24
- 1.25
- 1.26
- 1.27
- 1.28
- 1.29
- 1.3
- 1.31
- 1.32
- 1.33
- 1.34
- 1.35
- 1.36
- 1.37
- 1.38
- 1.39
- 1.4
- 1.41
- 1.42
- 1.43
- 1.44
- 1.45
- 1.46
- 1.47
- 1.48
- 1.49
- 1.5
- 1.51
- 1.52
- 1.53
- 1.54
- 1.55
- 1.56
- 1.57
- 1.58
- 1.59
- 1.6
- 1.61
- 1.62
- 1.63
- 1.64
- 1.65
- 1.66
- 1.67
- 1.68
- 1.69
- 1.7
- 1.71
- 1.72
- 1.73
- 1.74
- 1.75
- 1.76
- 1.77
- 1.78
- 1.79
- 1.8
- 1.81
- 1.82
- 1.83
- 1.84
- 1.85
- 1.86
- 1.87
- 1.88
- 1.89
- 1.9
- 1.91
- 1.92
- 1.93
- 1.94
- 1.95
- 1.96
- 1.97
- 1.98
- 1.99
-
2～2.99
- 2
- 2.01
- 2.02
- 2.03
- 2.04
- 2.05
- 2.06
- 2.07
- 2.08
- 2.09
- 2.1
- 2.11
- 2.12
- 2.13
- 2.14
- 2.15
- 2.16
- 2.17
- 2.18
- 2.19
- 2.2
- 2.21
- 2.22
- 2.23
- 2.24
- 2.25
- 2.26
- 2.27
- 2.28
- 2.29
- 2.3
- 2.31
- 2.32
- 2.33
- 2.34
- 2.35
- 2.36
- 2.37
- 2.38
- 2.39
- 2.4
- 2.41
- 2.42
- 2.43
- 2.44
- 2.45
- 2.46
- 2.47
- 2.48
- 2.49
- 2.5
- 2.51
- 2.52
- 2.53
- 2.54
- 2.55
- 2.56
- 2.57
- 2.58
- 2.59
- 2.6
- 2.61
- 2.62
- 2.63
- 2.64
- 2.65
- 2.66
- 2.67
- 2.68
- 2.69
- 2.7
- 2.71
- 2.72
- 2.73
- 2.74
- 2.75
- 2.76
- 2.77
- 2.78
- 2.79
- 2.8
- 2.81
- 2.82
- 2.83
- 2.84
- 2.85
- 2.86
- 2.87
- 2.88
- 2.89
- 2.9
- 2.91
- 2.92
- 2.93
- 2.94
- 2.95
- 2.96
- 2.97
- 2.98
- 2.99
-
3～3.99
- 3
- 3.01
- 3.02
- 3.03
- 3.04
- 3.05
- 3.06
- 3.07
- 3.08
- 3.09
- 3.1
- 3.11
- 3.12
- 3.13
- 3.14
- 3.15
- 3.16
- 3.17
- 3.175
- 3.18
- 3.19
- 3.2
- 3.21
- 3.22
- 3.23
- 3.24
- 3.25
- 3.26
- 3.27
- 3.28
- 3.29
- 3.3
- 3.31
- 3.32
- 3.33
- 3.34
- 3.35
- 3.36
- 3.37
- 3.38
- 3.39
- 3.4
- 3.41
- 3.42
- 3.43
- 3.44
- 3.45
- 3.46
- 3.47
- 3.48
- 3.49
- 3.5
- 3.51
- 3.52
- 3.53
- 3.54
- 3.55
- 3.56
- 3.57
- 3.58
- 3.59
- 3.6
- 3.61
- 3.62
- 3.63
- 3.64
- 3.65
- 3.66
- 3.67
- 3.68
- 3.69
- 3.7
- 3.71
- 3.72
- 3.73
- 3.74
- 3.75
- 3.76
- 3.77
- 3.78
- 3.79
- 3.8
- 3.81
- 3.82
- 3.83
- 3.84
- 3.85
- 3.86
- 3.87
- 3.88
- 3.89
- 3.9
- 3.91
- 3.92
- 3.93
- 3.94
- 3.95
- 3.96
- 3.97
- 3.98
- 3.99
-
4～4.99
- 4
- 4.01
- 4.02
- 4.03
- 4.04
- 4.05
- 4.06
- 4.07
- 4.08
- 4.09
- 4.1
- 4.11
- 4.12
- 4.13
- 4.14
- 4.15
- 4.16
- 4.17
- 4.18
- 4.19
- 4.2
- 4.21
- 4.22
- 4.23
- 4.24
- 4.25
- 4.26
- 4.27
- 4.28
- 4.29
- 4.3
- 4.31
- 4.32
- 4.33
- 4.34
- 4.35
- 4.36
- 4.37
- 4.38
- 4.39
- 4.4
- 4.41
- 4.42
- 4.43
- 4.44
- 4.45
- 4.46
- 4.47
- 4.48
- 4.49
- 4.5
- 4.51
- 4.52
- 4.53
- 4.54
- 4.55
- 4.56
- 4.57
- 4.58
- 4.59
- 4.6
- 4.61
- 4.62
- 4.63
- 4.64
- 4.65
- 4.66
- 4.67
- 4.68
- 4.69
- 4.7
- 4.71
- 4.72
- 4.73
- 4.74
- 4.75
- 4.76
- 4.77
- 4.78
- 4.79
- 4.8
- 4.81
- 4.82
- 4.83
- 4.84
- 4.85
- 4.86
- 4.87
- 4.88
- 4.89
- 4.9
- 4.91
- 4.92
- 4.93
- 4.94
- 4.95
- 4.96
- 4.97
- 4.98
- 4.99
-
5～5.99
- 5
- 5.01
- 5.02
- 5.03
- 5.04
- 5.05
- 5.06
- 5.07
- 5.08
- 5.09
- 5.1
- 5.11
- 5.12
- 5.13
- 5.14
- 5.15
- 5.16
- 5.17
- 5.18
- 5.19
- 5.2
- 5.21
- 5.22
- 5.23
- 5.24
- 5.25
- 5.26
- 5.27
- 5.28
- 5.29
- 5.3
- 5.31
- 5.32
- 5.33
- 5.34
- 5.35
- 5.36
- 5.37
- 5.38
- 5.39
- 5.4
- 5.41
- 5.42
- 5.43
- 5.44
- 5.45
- 5.46
- 5.47
- 5.48
- 5.49
- 5.5
- 5.51
- 5.52
- 5.53
- 5.54
- 5.55
- 5.56
- 5.57
- 5.58
- 5.59
- 5.6
- 5.61
- 5.62
- 5.63
- 5.64
- 5.65
- 5.66
- 5.67
- 5.68
- 5.69
- 5.7
- 5.71
- 5.72
- 5.73
- 5.74
- 5.75
- 5.76
- 5.77
- 5.78
- 5.79
- 5.8
- 5.81
- 5.82
- 5.83
- 5.84
- 5.85
- 5.86
- 5.87
- 5.88
- 5.89
- 5.9
- 5.91
- 5.92
- 5.93
- 5.94
- 5.95
- 5.96
- 5.97
- 5.98
- 5.99
-
6～6.9
- 6
- 6H
- 6.01
- 6.05
- 6.1
- 6.2
- 6.25
- 6.3
- 6.35
- 6.4
- 6.5
- 6.57
- 6.6
- 6.7
- 6.75
- 6.8
- 6.9
-
7～7.99
- 7
- 7.01
- 7.02
- 7.03
- 7.04
- 7.05
- 7.06
- 7.07
- 7.08
- 7.09
- 7.1
- 7.11
- 7.12
- 7.13
- 7.14
- 7.15
- 7.16
- 7.17
- 7.18
- 7.19
- 7.2
- 7.21
- 7.22
- 7.23
- 7.24
- 7.25
- 7.26
- 7.27
- 7.28
- 7.29
- 7.3
- 7.31
- 7.32
- 7.33
- 7.34
- 7.35
- 7.36
- 7.37
- 7.38
- 7.39
- 7.4
- 7.41
- 7.42
- 7.43
- 7.44
- 7.45
- 7.46
- 7.47
- 7.48
- 7.49
- 7.5
- 7.51
- 7.52
- 7.53
- 7.54
- 7.55
- 7.56
- 7.57
- 7.58
- 7.59
- 7.6
- 7.61
- 7.62
- 7.63
- 7.64
- 7.65
- 7.66
- 7.67
- 7.68
- 7.69
- 7.7
- 7.71
- 7.72
- 7.73
- 7.74
- 7.75
- 7.76
- 7.77
- 7.78
- 7.79
- 7.8
- 7.81
- 7.82
- 7.83
- 7.84
- 7.85
- 7.86
- 7.87
- 7.88
- 7.89
- 7.9
- 7.91
- 7.92
- 7.93
- 7.94
- 7.95
- 7.96
- 7.97
- 7.98
- 7.99
-
8～8.9
- 8
- 8H
- 8.01
- 8.02
- 8.1
- 8.15
- 8.2
- 8.21
- 8.25
- 8.3
- 8.4
- 8.5
- 8.6
- 8.7
- 8.75
- 8.8
- 8.9
-
9～9.99
- 9
- 9.01
- 9.02
- 9.03
- 9.04
- 9.05
- 9.06
- 9.07
- 9.08
- 9.09
- 9.1
- 9.11
- 9.12
- 9.13
- 9.14
- 9.15
- 9.16
- 9.17
- 9.18
- 9.19
- 9.2
- 9.21
- 9.22
- 9.23
- 9.24
- 9.25
- 9.26
- 9.27
- 9.28
- 9.29
- 9.3
- 9.31
- 9.32
- 9.33
- 9.34
- 9.35
- 9.36
- 9.37
- 9.38
- 9.39
- 9.4
- 9.41
- 9.42
- 9.43
- 9.44
- 9.45
- 9.46
- 9.47
- 9.48
- 9.49
- 9.5
- 9.51
- 9.52
- 9.53
- 9.54
- 9.55
- 9.56
- 9.57
- 9.58
- 9.59
- 9.6
- 9.61
- 9.62
- 9.63
- 9.64
- 9.65
- 9.66
- 9.67
- 9.68
- 9.69
- 9.7
- 9.71
- 9.72
- 9.73
- 9.74
- 9.75
- 9.76
- 9.77
- 9.78
- 9.79
- 9.8
- 9.81
- 9.82
- 9.83
- 9.84
- 9.85
- 9.86
- 9.87
- 9.88
- 9.89
- 9.9
- 9.91
- 9.92
- 9.93
- 9.94
- 9.95
- 9.96
- 9.97
- 9.98
- 9.99
-
10～10.9
- 10
- 10H
- 10.1
- 10.15
- 10.2
- 10.3
- 10.4
- 10.5
- 10.6
- 10.7
- 10.8
- 10.9
-
11～11.99
- 11
- 11.01
- 11.02
- 11.03
- 11.04
- 11.05
- 11.06
- 11.07
- 11.08
- 11.09
- 11.1
- 11.11
- 11.12
- 11.13
- 11.14
- 11.15
- 11.16
- 11.17
- 11.18
- 11.19
- 11.2
- 11.21
- 11.22
- 11.23
- 11.24
- 11.25
- 11.26
- 11.27
- 11.28
- 11.29
- 11.3
- 11.31
- 11.32
- 11.33
- 11.34
- 11.35
- 11.36
- 11.37
- 11.38
- 11.39
- 11.4
- 11.41
- 11.42
- 11.43
- 11.44
- 11.45
- 11.46
- 11.47
- 11.48
- 11.49
- 11.5
- 11.51
- 11.52
- 11.53
- 11.54
- 11.55
- 11.56
- 11.57
- 11.58
- 11.59
- 11.6
- 11.61
- 11.62
- 11.63
- 11.64
- 11.65
- 11.66
- 11.67
- 11.68
- 11.69
- 11.7
- 11.71
- 11.72
- 11.73
- 11.74
- 11.75
- 11.76
- 11.77
- 11.78
- 11.79
- 11.8
- 11.81
- 11.82
- 11.83
- 11.84
- 11.85
- 11.86
- 11.87
- 11.88
- 11.89
- 11.9
- 11.91
- 11.92
- 11.93
- 11.94
- 11.95
- 11.96
- 11.97
- 11.98
- 11.99
-
12～12.9
- 12
- 12H
- 12.1
- 12.2
- 12.3
- 12.4
- 12.5
- 12.6
- 12.7
- 12.8
- 12.9
-
13～13.9
- 13
- 13.1
- 13.2
- 13.3
- 13.4
- 13.5
- 13.6
- 13.7
- 13.8
- 13.9
-
14～14.9
- 14
- 14H
- 14.1
- 14.2
- 14.3
- 14.4
- 14.5
- 14.6
- 14.7
- 14.8
- 14.9
-
15～15.99
- 15
- 15.1
- 15.2
- 15.3
- 15.4
- 15.5
- 15.51
- 15.52
- 15.53
- 15.54
- 15.55
- 15.56
- 15.57
- 15.58
- 15.59
- 15.6
- 15.61
- 15.62
- 15.63
- 15.64
- 15.65
- 15.66
- 15.67
- 15.68
- 15.69
- 15.7
- 15.71
- 15.72
- 15.73
- 15.74
- 15.75
- 15.76
- 15.77
- 15.78
- 15.79
- 15.8
- 15.81
- 15.82
- 15.83
- 15.84
- 15.85
- 15.86
- 15.87
- 15.88
- 15.89
- 15.9
- 15.91
- 15.92
- 15.93
- 15.94
- 15.95
- 15.96
- 15.97
- 15.98
- 15.99
-
16～16.9
- 16
- 16.1
- 16.2
- 16.3
- 16.4
- 16.5
- 16.6
- 16.7
- 16.8
- 16.9
-
17～17.9
- 17
- 17.1
- 17.2
- 17.3
- 17.4
- 17.5
- 17.6
- 17.7
- 17.8
- 17.9
-
18～18.9
- 18
- 18.1
- 18.2
- 18.3
- 18.4
- 18.5
- 18.6
- 18.7
- 18.8
- 18.9
-
19～19.99
- 19
- 19H
- 19..5
- 19.1
- 19.2
- 19.3
- 19.4
- 19.5
- 19.51
- 19.52
- 19.53
- 19.54
- 19.55
- 19.56
- 19.57
- 19.58
- 19.59
- 19.6
- 19.61
- 19.62
- 19.63
- 19.64
- 19.65
- 19.66
- 19.67
- 19.68
- 19.69
- 19.7
- 19.71
- 19.72
- 19.73
- 19.74
- 19.75
- 19.76
- 19.77
- 19.78
- 19.79
- 19.8
- 19.81
- 19.82
- 19.83
- 19.84
- 19.85
- 19.86
- 19.87
- 19.88
- 19.89
- 19.9
- 19.91
- 19.92
- 19.93
- 19.94
- 19.95
- 19.96
- 19.97
- 19.98
- 19.99
-
20～20.5
- 20
- 20.5
-
21～21.5
- 21
- 21.5
-
22～22.5
- 22
- 22.5
-
23～23.5
- 23
- 23.5
-
24～24.5
- 24
- 24.5
-
25～25.5
- 25
- 25.5
-
26～26.5
- 26
- 26.5
-
27～27.5
- 27
- 27.5
-
28～28.5
- 28
- 28.5
-
29～29.5
- 29
- 29.5
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
-
Blade length (ℓ)(mm)
-
0.01～0.9
- 0.01
- 0.02
- 0.03
- 0.04
- 0.045
- 0.05
- 0.06
- 0.07
- 0.075
- 0.08
- 0.09
- 0.1
- 0.105
- 0.12
- 0.135
- 0.15
- 0.16
- 0.2
- 0.23
- 0.24
- 0.25
- 0.3
- 0.32
- 0.4
- 0.45
- 0.5
- 0.55
- 0.6
- 0.65
- 0.7
- 0.75
- 0.8
- 0.9
-
1～1.9
- 1
- 1.05
- 1.1
- 1.2
- 1.25
- 1.3
- 1.35
- 1.4
- 1.5
- 1.6
- 1.7
- 1.75
- 1.8
- 1.9
-
2～2.9
- 2
- 2.1
- 2.2
- 2.25
- 2.3
- 2.4
- 2.5
- 2.6
- 2.7
- 2.8
- 2.9
-
3～3.9
- 3
- 3.1
- 3.2
- 3.3
- 3.4
- 3.5
- 3.6
- 3.7
- 3.75
- 3.8
- 3.9
-
4～4.9
- 4
- 4.1
- 4.2
- 4.3
- 4.4
- 4.5
- 4.6
- 4.7
- 4.8
- 4.9
-
5～5.9
- 5
- 5.1
- 5.2
- 5.25
- 5.3
- 5.4
- 5.5
- 5.6
- 5.7
- 5.8
- 5.9
-
6～6.9
- 6
- 6.1
- 6.2
- 6.25
- 6.3
- 6.4
- 6.5
- 6.6
- 6.7
- 6.75
- 6.8
- 6.9
-
7～7.9
- 7
- 7.1
- 7.2
- 7.3
- 7.4
- 7.5
- 7.6
- 7.7
- 7.8
- 7.9
-
8～8.9
- 8
- 8.1
- 8.2
- 8.25
- 8.3
- 8.4
- 8.5
- 8.6
- 8.7
- 8.8
- 8.9
-
9～9.9
- 9
- 9.1
- 9.2
- 9.3
- 9.4
- 9.5
- 9.6
- 9.7
- 9.8
- 9.9
-
10～10.9
- 10
- 10.1
- 10.2
- 10.3
- 10.4
- 10.5
- 10.6
- 10.7
- 10.8
- 10.9
-
11～11.9
- 11
- 11.1
- 11.2
- 11.3
- 11.4
- 11.5
- 11.6
- 11.7
- 11.8
- 11.9
-
12
-
12～12.9
- 12.2
- 12.3
- 12.4
- 12.5
- 12.6
- 12.8
- 12.9
-
13～13.8
- 13
- 13.1
- 13.2
- 13.3
- 13.4
- 13.5
- 13.6
- 13.8
-
14～14.8
- 14
- 14.1
- 14.2
- 14.3
- 14.4
- 14.5
- 14.6
- 14.7
- 14.8
-
15～15.9
- 15
- 15.2
- 15.3
- 15.4
- 15.5
- 15.6
- 15.8
- 15.9
-
16～16.8
- 16
- 16.2
- 16.4
- 16.5
- 16.6
- 16.8
-
17～17.8
- 17
- 17.1
- 17.2
- 17.3
- 17.4
- 17.5
- 17.6
- 17.7
- 17.8
-
18～18.8
- 18
- 18.2
- 18.3
- 18.4
- 18.5
- 18.6
- 18.8
-
19～19.8
- 19
- 19.2
- 19.4
- 19.5
- 19.6
- 19.8
-
20～20.8
- 20
- 20.1
- 20.2
- 20.4
- 20.5
- 20.6
- 20.7
- 20.8
-
21～21.9
- 21
- 21.2
- 21.3
- 21.4
- 21.5
- 21.6
- 21.8
- 21.9
-
22～22.8
- 22
- 22.2
- 22.4
- 22.5
- 22.6
- 22.8
-
23～23.8
- 23
- 23.1
- 23.2
- 23.4
- 23.5
- 23.6
- 23.8
-
24～24.9
- 24
- 24.2
- 24.3
- 24.4
- 24.5
- 24.6
- 24.8
- 24.9
-
25～25.8
- 25
- 25.2
- 25.4
- 25.5
- 25.6
- 25.8
-
26～26.8
- 26
- 26.2
- 26.4
- 26.5
- 26.6
- 26.7
- 26.8
-
27～27.9
- 27
- 27.2
- 27.3
- 27.4
- 27.5
- 27.6
- 27.8
- 27.9
-
28～28.8
- 28
- 28.2
- 28.4
- 28.5
- 28.58
- 28.8
-
29～29.80
- 29
- 29.1
- 29.2
- 29.5
- 29.6
- 29.7
- 29.80
-
30～30.9
- 30
- 30.3
- 30.4
- 30.5
- 30.6
- 30.8
- 30.9
-
31～31.8
- 31
- 31.2
- 31.5
- 31.6
- 31.8
-
32～32.8
- 32
- 32.1
- 32.4
- 32.5
- 32.7
- 32.8
-
33～33.9
- 33
- 33.2
- 33.3
- 33.6
- 33.9
-
34～34.8
- 34
- 34.2
- 34.4
- 34.5
- 34.8
-
35～35.80
- 35
- 35.1
- 35.2
- 35.4
- 35.5
- 35.6
- 35.7
- 35.80
-
36～36.8
- 36
- 36.4
- 36.5
- 36.8
-
37～37.6
- 37
- 37.2
- 37.5
- 37.6
-
38～38.8
- 38
- 38.4
- 38.5
- 38.8
-
39～39.6
- 39
- 39.2
- 39.5
- 39.6
-
40～40.8
- 40
- 40.4
- 40.5
- 40.8
-
41～41.6
- 41
- 41.2
- 41.5
- 41.6
-
42～42.8
- 42
- 42.4
- 42.5
- 42.8
-
43～43.6
- 43
- 43.2
- 43.5
- 43.6
-
44～44.8
- 44
- 44.4
- 44.5
- 44.8
-
45～45.5
- 45
- 45.2
- 45.5
-
46～46.8
- 46
- 46.4
- 46.5
- 46.8
-
47～47.80
- 47
- 47.2
- 47.5
- 47.6
- 47.80
-
48～48.5
- 48
- 48.5
-
49～49.5
- 49
- 49.5
-
50～50.5
- 50
- 50.5
-
51～51.5
- 51
- 51.5
-
52
-
53～53.5
- 53
- 53.5
-
54～54.5
- 54
- 54.5
-
55～55.5
- 55
- 55.5
-
56
-
57～57.5
- 57
- 57.5
-
58～58.5
- 58
- 58.5
-
59～59.5
- 59
- 59.5
-
60～60.50
- 60
- 60.50
-
62
-
63
-
64
-
65
-
66
-
67
-
70～70.50
- 70
- 70.50
-
72
-
75
-
76
-
78
-
80
-
82
-
83
-
85
-
90
-
95
-
100
-
103
-
105
-
110
-
115
-
120
-
125
-
130
-
150
-
180
-
200
-
-
Underneck length (ℓ1)(mm)
-
Shank diameter (d)(mm)
-
Number of flutes(sheet)
-
Overall Length (L)(mm)
-
work material
- general steel
- Quenched and tempered steel
- High Hardness Steel-HRC55
- High Hardness Steel-HRC60
- High Hardness Steel-HRC65
- Stainless Steel
- Cast Iron
- Aluminum
- Titanium
- Copper
- Graphite
- Resin
-
Torsion Angle (θ)
-
Machining Application
-
Coating
- For High Hardness (Silicon Group)
- TiAlN
- For General Steels (AlCrN, etc.)
- TiCN
- TiN
- DLC
- CrN
- Dia Coat
- Non-Coated
- DG
- AlTiN
- BLUE
- TiSiN
- HS
- FX
- X코팅
- TACrN
- TiALN
- DIA
- A+
-
Blade tip shape
-
Type
- Square
- Roughing
- Long-Neck Square
- High Helical
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy