(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.
Brand |
|
---|---|
Filter By |
|
CAD |
|
Days to Ship |
|
837 itemsMặt hàng
You can add up to 6 items per a category to the compare list.
Anti-Vibration Short Carbide End Mill_AE-VMS
OSG
[Features]· DUARISE coating· Offers excellent lubrication, wear resistance and high-temperature oxidation resistance. The composite multilayer structure helps prevent thermal cracking. Smoothing of the coating surface improves machining surface precision. The positive-angle flute has excellent sharpness and helps reduce cutting resistance. A flute form that achieves both high tool rigidity and a good chip discharge performance, enabling stable machining and a reduction in burring. Use of a variable-lead geometry and unequal divisions enables stable, high-efficiency machining.
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
3 ~ 12 | 8 ~ 26 | - | 6 ~ 12 | 4 | 60 ~ 90 | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | Variable lead | Side / Groove / Inclined Cuts | - | - | Square |
From: 558,000 VND |
---|
Days to Ship: Số ngày giao hàng: 10 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Micro Grain Carbide End Mills WXL Coated 2 Flutes (3D Type)_WXL-3D-DE
OSG
2-flute end mill with hard lubricant film WXL coating applied. It is effective for cutting copper alloys as well as steel. Recommended for both wet and dry work.
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
0.1 ~ 20 | 0.3 ~ 60 | - | 4 ~ 20 | 2 | 45 ~ 130 | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[◎] | Standard torsion (30-40°) | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | For General Steels (AlCrN, etc.) | Sharp Edge / With Lead | Square |
From: 285,000 VND |
---|
Days to Ship: Số ngày giao hàng: Same day or more |
You can add up to 6 items per a category to the compare list.
XAL series carbide square end mill, 4-flute / 3D Flute Length (regular) model
MISUMI
The Misumi's original fine intermediate flute length is available at a reasonable price
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
1 ~ 20 | 3 ~ 60 | - | 4 ~ 20 | 4 | 45 ~ 130 | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Copper[◎] | Standard torsion (30-40°) | Plane / Side / Inclined Cuts | For General Steels (AlCrN, etc.) | Sharp Edge / With Lead | Square |
Days to Ship: Số ngày giao hàng: Same day or more |
You can add up to 6 items per a category to the compare list.
XAL series carbide square end mill, 2-flute / 2D Flute Length (short) model
MISUMI
The price of the low-cost classic XAL Series has been further reduced!
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
0.1 ~ 20 | 0.2 ~ 40 | - | 3 ~ 20 | 2 | 40 ~ 110 | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Copper[◎] | Standard torsion (30-40°) | Plane / Side / Groove / Inclined Cuts | For General Steels (AlCrN, etc.) | Sharp Edge / With Lead | Square |
Days to Ship: Số ngày giao hàng: Same day or more |
You can add up to 6 items per a category to the compare list.
XAL Coated Carbide Long Neck Square End Mill, 2-Flute / Long Neck Model
MISUMI
The long-awaited long-neck type joins the popular XAL Series
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
0.1 ~ 6 | 0.2 ~ 9 | 0.3 ~ 60 | 4 ~ 6 | 2 | 50 ~ 100 | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○] | Standard torsion (30-40°) | Plane / Side / Groove / Inclined Cuts | For General Steels (AlCrN, etc.) | Sharp Edge / With Lead | Long-Neck Square |
Days to Ship: Số ngày giao hàng: Same day or more |
You can add up to 6 items per a category to the compare list.
YG 1
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
1 ~ 20 | 3 ~ 115 | - | 6 ~ 20 | 3 | 40 ~ 200 | Aluminum[◎] / Copper[○] | Powerful Torsion (45°-60°) | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Non-Coated | - | Square |
From: 400,120 VND |
---|
Days to Ship: Số ngày giao hàng: Same day or more |
You can add up to 6 items per a category to the compare list.
XAL series carbide square end mill, 4-flute / 2D Flute Length (short) model
MISUMI
Popular XAL Series with the 4-flute structure that's ideal for side milling has been further reduced in price!
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
1 ~ 20 | 2 ~ 40 | - | 4 ~ 20 | 4 | 40 ~ 110 | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Copper[◎] | Standard torsion (30-40°) | Plane / Side / Inclined Cuts | For General Steels (AlCrN, etc.) | Sharp Edge / With Lead | Square |
Days to Ship: Số ngày giao hàng: Same day or more |
You can add up to 6 items per a category to the compare list.
TSC series carbide long neck square end mill, 2-flute / long neck model
MISUMI
[Features]·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)·Can select optimal body length for processing deep parts of workpiece·Optimal for machining in low to medium rotation range due to the general-purpose 30° helix angle·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
0.1 ~ 6 | 0.2 ~ 10 | 0.3 ~ 60 | 4 ~ 6 | 2 | 40 ~ 100 | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | Standard torsion (30-40°) / Powerful Torsion (45°-60°) | Plane / Side / Groove / Inclined Cuts / Countersinking | For High Hardness (Silicon Group) | Sharp Edge / With Lead | Long-Neck Square |
Days to Ship: Số ngày giao hàng: 4 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Micro Grain Carbide End Mills WXL Coated 4 Flutes Short_WXL-EMS
OSG
[Notice] Alterations can now be specified. Please select from "Standard/Alterations Category" of narrowing conditions.[Features]・ By applying a rigid lubricating film WXL coating, it is also effective for a wide range of cutting such as general steel, hardened steel and copper alloys.・ Recommended for both wet and dry processing.
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
1 ~ 30 | 2.5 ~ 45 | - | 4 ~ 32 | 4 | 40 ~ 125 | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[◎] | Standard torsion (30-40°) | Plane / Side / Groove / Inclined Cuts | For General Steels (AlCrN, etc.) | Sharp Edge / With Lead | Square |
From: 428,333 VND |
---|
Special Price |
Days to Ship: Số ngày giao hàng: Same day or more |
You can add up to 6 items per a category to the compare list.
GS MILL Long Neck, 2-Flute GSN2
NACHI(FUJIKOSHI)
Ideal for fine machining of molds. Available in various sizes and can be used for all kinds of machining.
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
0.2 ~ 6 | 0.3 ~ 9 | 0.5 ~ 60 | 4 ~ 6 | 2 | 45 ~ 120 | general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] | Standard torsion (30-40°) | Plane / Side / Groove / Inclined Cuts | TiAlN | Sharp Edge | Long-Neck Square |
From: 783,927 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
XAL series carbide multi-functional square end mill, 4-flute, 45° torsion / short model
MISUMI
The new "standard" square end mill with 45° spiral is available at an ultra-low price
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
2 ~ 20 | 5 ~ 38 | - | 4 ~ 20 | 4 | 45 ~ 125 | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○/◎] / Aluminum[◎] / Copper[◎] / Resin[○] | Powerful Torsion (45°-60°) | Plane / Side / Inclined Cuts | For General Steels (AlCrN, etc.) | With Lead | Square |
Days to Ship: Số ngày giao hàng: Same day or more |
You can add up to 6 items per a category to the compare list.
NACHI(FUJIKOSHI)
Supports a wide range of materials from raw materials to hardened materials. Suitable for finishing grooves and side surfaces.
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
1 ~ 18 | 2.5 ~ 32 | - | 3 ~ 20 | 4 | 38 ~ 100 | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] | Standard torsion (30-40°) | Plane / Side / Groove / Inclined Cuts | TiAlN | Sharp Edge | Square |
From: 540,666 VND |
---|
Days to Ship: Số ngày giao hàng: Same day or more |
You can add up to 6 items per a category to the compare list.
ULTRA WX Micro Grain Carbide End Mills TiAlN Coated 3 Flutes Stub for Slotting_WX-SHTSS
OSG
[Notice] Alterations can now be specified. Please select from "Standard/Alterations Category" of narrowing conditions.[Features]・ This is an end mill that allows continuous grooving after drilling without pre-machining. The number of tools in the magazine can be reduced.
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
3 ~ 12 | 4.5 ~ 18 | - | 6 ~ 12 | 3 | 50 ~ 75 | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | Powerful Torsion (45°-60°) | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | TiAlN | With Lead | Square |
From: 1,342,414 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
XAC series carbide roughing end mill, fine pitch / regular model
MISUMI
Strongly supports the cost reduction of roughing with the limited special price for standard sizes
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
6 ~ 20 | 16 ~ 38 | - | 6 ~ 20 | 3 ~ 4 | 57 ~ 104 | general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | Weak torsion (15 to 25˚) | Plane / Side / Groove / Inclined Cuts | TiAlN | C plane | Roughing |
From: 1,478,634 VND |
---|
Special Price |
Days to Ship: Số ngày giao hàng: Same day or more |
You can add up to 6 items per a category to the compare list.
Micro Grain Carbide End Mills WXL Coated 2 Flutes Long Neck Short_WXL-LN-EDS
OSG
[Notice] Alterations can now be specified. Please select from "Standard/Alterations Category" of narrowing conditions.[Features]・ WXL coating with excellent lubricity and abrasion resistance・ Can be used with a wide range of work materials and cutting applications. Multiple variations available.
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
0.1 ~ 12 | 0.15 ~ 18 | 0.3 ~ 60 | 4 ~ 12 | 2 | 45 ~ 140 | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[◎] | Standard torsion (30-40°) | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | For General Steels (AlCrN, etc.) | Sharp Edge / With Lead | Long-Neck Square |
From: 419,999 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
C-CES4000, UT Coat, 4-Flute Square [Alteration Supported Product]
UNION TOOL
[Features]· Supports a wide range of applications from carbon to hardened steel (up to 55 HRC)· Reasonable price, yet high quality and high performance
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
1 ~ 20 | 2.5 ~ 50 | - | 4 ~ 20 | 4 | 45 ~ 110 | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] / Copper[◎] | Standard torsion (30-40°) | Plane / Side / Groove / Inclined Cuts | TiCN | With Lead | Square |
From: 488,848 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
ULTRA FX Micro Grain Carbide End Mills TiAlN Corted 2 Flutes for Counterboring_FX-ZDS
OSG
[Notice] Alterations can now be specified. Please select from "Standard/Alterations Category" of narrowing conditions.[Features]・ An end mill dedicated to counter boring. It can be used not only for drilling counterbore holes for hex bolts, but also as a pre-machining tool for drilling on slopes.
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
3 ~ 20 | 8 ~ 38 | - | 6 ~ 20 | 2 | 50 ~ 125 | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] | Weak torsion (15 to 25˚) | Countersinking | TiAlN | With Lead | Square |
From: 1,544,642 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
MUGEN-COATING 2-Flute End Mill MSE230
NS TOOL
[Notice] Alterations can now be specified. Please select from "Standard/Alterations Category" of narrowing conditions.[Features]・ MUGEN Coating is used for the 2-flute end mill.・ Capable of universal cutting, from roughing to finishing.
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
0.1 ~ 12 | 0.15 ~ 30 | - | 4 ~ 12 | 2 | 45 ~ 80 | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎] | Standard torsion (30-40°) | Plane / Side / Groove / Inclined Cuts | TiAlN | With Lead | Square |
From: 379,275 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
YG 1
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
3 ~ 20 | - | - | 6 ~ 20 | 3 ~ 5 | - | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Titanium[◎] | - | Plane / Side / Groove / Inclined Cuts | TiAlN | - | Roughing |
From: 491,283 VND |
---|
Days to Ship: Số ngày giao hàng: 4 Day(s) or more |
You can add up to 6 items per a category to the compare list.
3-flute Long for Aluminum Alloy_AERO-ETL
OSG
[Notice] Alterations can now be specified. Please select from "Standard/Alterations Category" of narrowing conditions.[Features]・ It maximizes the performance of high-power machines・ Ideal for high efficiency machining of large aluminum parts・ Sharp edge with sharp edge (Thin film thickness of 1 μm)
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
12 ~ 20 | 50 | - | 12 ~ 20 | - | 110 | Aluminum[◎] | Standard torsion (30-40°) | - | DLC | - | Square |
From: 3,527,303 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Carbide Square End Mill, 2-Flute / 0.01 mm Designation Model
MISUMI
The blade diameter of 0.01 mm increments can be selected from the extensive variations of flute length
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
3.15 ~ 19.99 | 3.5 ~ 48 | - | 6 ~ 20 | 2 | 40 ~ 105 | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | Standard torsion (30-40°) | Plane / Side / Groove / Inclined Cuts | Non-Coated | Sharp Edge / With Lead | Square |
From: 820,745 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
ALZ345 High-Efficiency Heavy Cutting End Mill for Aluminum
NS TOOL
[Notice] Alterations can now be specified. Please select from "Standard/Alterations Category" of narrowing conditions.[Features]・ AL series realizes stable and high efficiency machining under all conditions.・ The drilling performance is greatly improved.・ Highly efficient type with improved cutting chip discharge.
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
1 ~ 12 | 1.5 ~ 18 | 3 ~ 36 | 4 ~ 12 | 3 | 45 ~ 80 | Aluminum[◎] | Powerful Torsion (45°-60°) | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Non-Coated | With Lead | Square |
From: 921,041 VND |
---|
Days to Ship: Số ngày giao hàng: Same day or more |
You can add up to 6 items per a category to the compare list.
4-Flute Short Square End Mill (GS-EMS)
OSG KOREA CORP
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
1 ~ 25 | 2.5 ~ 45 | - | 6 ~ 25 | 4 | 40 ~ 120 | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] | Standard torsion (30-40°) | Plane / Side / Groove / Inclined Cuts | FX | - | Square |
From: 572,324 VND |
---|
Days to Ship: Số ngày giao hàng: Same day or more |
You can add up to 6 items per a category to the compare list.
45˚ Helix Square End Mill [3ALE]
HANSONG M&T
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
1 ~ 20 | 2 ~ 125 | - | 6 ~ 20 | 3 | 40 ~ 220 | - | 45° | - | Non-Coated | - | High Helical |
From: 843,492 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Variable Lead End Mill For Difficult-To-Cut Materials, IC4DMC
THE CUT
[Features]· The variable lead and unique flute shape help suppress cutting resistance and chatter when machining difficult-to-cut materials.· Capable of high speed cutting. Delivers a clean machined surface.· The flute tip features gash land geometry. (improved chipping-resistance)
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
2 ~ 20 | 4 ~ 45 | - | 4 ~ 20 | 4 | 50 ~ 100 | general steel[○] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Titanium[○] | Variable lead | Side / Groove | - | - | Square |
From: 650,473 VND |
---|
Days to Ship: Số ngày giao hàng: 7 Day(s) or more |
You can add up to 6 items per a category to the compare list.
MISUMI
· A highly versatile series that's ideal for machining work materials from tempered steel (up to 45 HRC) to high hardness steel (up to 65 HRC).· Coating with excellent hardness and heat resistance makes it suitable for high speed machining.· Corresponds to cutting in both longitudinal and lateral directions, allowing a single unit to be used to machine complicated shapes.
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
2 ~ 12 | 5 ~ 30 | - | 3 ~ 12 | 3 | 50 ~ 100 | general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○] / Cast Iron[◎] | Powerful Torsion (45°-60°) | Plane / Side / Groove / Inclined Cuts | For High Hardness (Silicon Group) | With Lead | Square |
Days to Ship: Số ngày giao hàng: 4 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Regular Grain Carbide End Mills 3 Flutes Short for Copper and Aluminum Alloys_CA-ETS
OSG
With a wide chip pocket, which has been designed considering the sharpness and chip discharge, it realizes high efficiency machining of grooves and side faces.
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
3 ~ 20 | 8 ~ 38 | - | 6 ~ 20 | 3 | 50 ~ 105 | Aluminum[◎] / Copper[◎] / Resin[○] | Standard torsion (30-40°) | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Non-Coated | With Lead | Square |
From: 1,167,530 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
4-Flute Short (Strong Heavy Cutting Type), WX-PHS [Alterations Available]
OSG
[Notice] Alterations can now be specified. Please select from "Standard/Alterations Category" of narrowing conditions.[Features]・ A high helix end mill that achieves both high cutting chip discharge and cutting edge rigidity. Highly efficient heavy cutting is possible not only for side cutting but also for groove cutting.
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
4 ~ 6 | 11 ~ 13 | - | 6 | 4 | 60 | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[◎] / Copper[○] | Powerful Torsion (45°-60°) | Plane / Side / Groove / Inclined Cuts | TiAlN | With Lead | Square |
From: 1,810,000 VND |
---|
Days to Ship: Số ngày giao hàng: 15 Day(s) |
You can add up to 6 items per a category to the compare list.
Carbide Solid End Mill 4-Flute GM-4E
KABUSYUUKOUGU
GM Series end mill that has both high hardness and elastic modulus due to the use of carbide material and features the reasonable balance with the good cutting quality. It can extend the tool lifespan.
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
1 ~ 20 | 3 ~ 45 | - | 4 ~ 20 | 4 | 50 ~ 100 | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[◎] | Powerful Torsion (45°-60°) | Side / Groove | TiAlN | - | Square |
From: 201,796 VND |
---|
Days to Ship: Số ngày giao hàng: 4 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Diamond coated roughing rooter_DIA-REC
OSG
Processing application (processing shape) sideTool material: CarbideWork Material: Graphite/ResinCoating for non-ferrous metals (Diamond coating)Standard/Alteration category: Manufacturer's standard product
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
6 ~ 10 | 18 ~ 30 | - | 6 ~ 10 | 4 ~ 6 | 68 ~ 80 | - | - | - | Dia Coat | - | Square |
From: 4,806,328 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
(Economy series) XAL series carbide square end mill, 2-flute / 3D Flute Length model
MISUMI
The Misumi's unique lineup of fine flute length is available at attractive low prices
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
0.1 ~ 20 | 0.3 ~ 60 | - | 3 ~ 20 | 2 | 40 ~ 110 | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○/◎] / Aluminum[◎] / Copper[◎] / Resin[○] | Standard torsion (30-40°) | Plane / Side / Groove / Inclined Cuts | For General Steels (AlCrN, etc.) | Sharp Edge / With Lead | Square |
Days to Ship: Số ngày giao hàng: Same day or more |
You can add up to 6 items per a category to the compare list.
MISUMI
High-precision side finishing end mill with excellent quality for high hardness steel machining
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
3 ~ 10 | 10 ~ 25 | - | 6 ~ 10 | 4 ~ 6 | 60 ~ 80 | general steel[○] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○] / Cast Iron[◎] | Powerful Torsion (45°-60°) | Plane / Side / Inclined Cuts | For High Hardness (Silicon Group) | Micro R | High Helical |
From: 1,544,527 VND |
---|
Special Price |
Days to Ship: Số ngày giao hàng: Same day |
You can add up to 6 items per a category to the compare list.
Micro Grain Carbide End Mills WXL Coated 2 Flutes (2D Type)_WXL-2D-DE
OSG
[Features]· 2-flute end mill coated with WXL hard lubricating film coating. Proven cutting performance on not only steel but also copper alloys. Recommended for both wet-type and dry-type milling.
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
0.1 ~ 30 | 0.2 ~ 60 | - | 4 ~ 32 | 2 | 45 ~ 140 | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[◎] | Standard torsion (30-40°) | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | For General Steels (AlCrN, etc.) | Sharp Edge | Square |
From: 285,000 VND |
---|
Days to Ship: Số ngày giao hàng: Same day or more |
You can add up to 6 items per a category to the compare list.
CPS 2-Flute Square for Resin Machining [Alteration Supported Product]
UNION TOOL
[Features]· Medium Blade Length End Mill for Resin Processing· Unique blade shape· Blade Length = 3x Outer Diameter (Some 1.5x/2x)· An excellent machined surface can be obtained, even for long resin protrusion machining
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
0.3 ~ 12 | 0.9 ~ 36 | - | 3 ~ 12 | 2 | 45 ~ 100 | Aluminum[○] / Copper[◎] / Resin[◎] | Standard torsion (30-40°) | Plane / Side / Groove / Inclined Cuts | Non-Coated | With Lead | Square |
From: 563,011 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
YG 1
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
1 ~ 20 | 3 ~ 55 | - | 6 ~ 20 | 2 | 50 ~ 110 | Aluminum[◎] / Copper[○] | Powerful Torsion (45°-60°) | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Non-Coated | - | Square |
From: 325,584 VND |
---|
Days to Ship: Số ngày giao hàng: 4 Day(s) or more |
You can add up to 6 items per a category to the compare list.
2-Flute Short Square End Mill (GS-EDS)
OSG KOREA CORP
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
0.1 ~ 25 | 0.2 ~ 45 | - | 4 ~ 25 | 2 | 40 ~ 120 | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] | Standard torsion (30-40°) | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | FX | - | Square |
From: 415,957 VND |
---|
Days to Ship: Số ngày giao hàng: 5 Day(s) or more |
You can add up to 6 items per a category to the compare list.
XAC series carbide square end mill, 4-flute / long model
MISUMI
User friendly TiAlN coated series with long flute length
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
3 ~ 12 | 12 ~ 30 | - | 6 ~ 12 | 4 | 50 ~ 90 | general steel[○] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | Standard torsion (30-40°) | Plane / Side / Inclined Cuts | TiAlN | Sharp Edge | Square |
From: 671,026 VND |
---|
Special Price |
Days to Ship: Số ngày giao hàng: Same day or more |
You can add up to 6 items per a category to the compare list.
XAL Coated Carbide Long Neck Square End Mill, 4-Flute / Long Neck Model
MISUMI
The price that's only achievable by XAL Series! Introducing the 4-flute long neck
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
1 ~ 6 | 1.5 ~ 9 | 4 ~ 50 | 4 ~ 6 | 4 | 50 ~ 100 | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○] | Standard torsion (30-40°) | Plane / Side / Inclined Cuts | For General Steels (AlCrN, etc.) | Sharp Edge / With Lead | Long-Neck Square |
Days to Ship: Số ngày giao hàng: 4 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Micro Grain Carbide End Mills WXL Coated 4 Flutes Long Neck Short_WXL-LN-EMS
OSG
[Notice] Alterations can now be specified. Please select from "Standard/Alterations Category" of narrowing conditions.[Features]・ WXL coating with excellent lubricity and abrasion resistance.・ Can be used with a wide range of work materials and cutting applications. Multiple variations available.
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
1 ~ 10 | 1.5 ~ 15 | 4 ~ 80 | 4 ~ 10 | 4 | 45 ~ 150 | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[◎] | Standard torsion (30-40°) | Plane / Side / Groove / Inclined Cuts | For General Steels (AlCrN, etc.) | With Lead | Long-Neck Square |
From: 409,412 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Square End Mill [2HPE (HPE2000)]
HANSONG M&T
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
0.1 ~ 20 | 0.2 ~ 45 | - | 3 ~ 20 | 2 | 45 ~ 100 | - | 30° | - | TiSiN | - | Square |
From: 735,245 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
VAC Series Carbide 4-Flute Square End Mill (Extra-Long Model)
MISUMI
[Features]·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)·Effective for processing deep parts due to extra long blade length·Ultra-fine particle cemented carbide base material and coating with excellent adhesion and heat resistance are adopted·Can process heat-treated steel up to 50HRC·Optimal for machining in low to medium rotation range due to the general-purpose 30° helix angle·Coating with excellent lubricity provides stable abrasion resistance and improves shape accuracy of workpiece (VAC coating has weak electrical conductivity. Please be careful when using an electrical tool setter.)·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
1.5 ~ 25 | 6 ~ 120 | - | 4 ~ 25 | 4 | 60 ~ 250 | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | - | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking | - | - | Square |
From: 890,809 VND |
---|
Days to Ship: Số ngày giao hàng: 4 Day(s) or more |
You can add up to 6 items per a category to the compare list.
GSX MILL 3-Flute Blade 1.5D GSX3C-1.5D
NACHI(FUJIKOSHI)
Supports wet processing of raw materials through high-speed dry processing of high hardness materials.
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
1 ~ 20 | 1.5 ~ 30 | - | 4 ~ 20 | 3 | 40 ~ 100 | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] | Standard torsion (30-40°) | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | For General Steels (AlCrN, etc.) | With Lead | Square |
From: 589,568 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
ULTRA FX Micro Grain Carbide End Mills TiAlN coated 4 Flutes Extra Long_FX-MG-EXML
OSG
[Notice] Alterations can now be specified. Please select from "Standard/Alterations Category" of narrowing conditions.[Features]・ General-purpose type 4-flute end mill ultra-long flute type with FX coating that has excellent heat resistance.
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
3 ~ 30 | 20 ~ 112 | - | 6 ~ 32 | 4 | 60 ~ 225 | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | Standard torsion (30-40°) | Plane / Side / Groove / Inclined Cuts | TiAlN | With Lead | Square |
From: 2,164,898 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
ULTRA WX Micro Grain Carbide End Mills TiAlN coated 4 Flutes Stub (Corner Protect Type)_WX-G-EMSS
OSG
Heavy duty type 4-flute end mill with reinforced bottom blade corner. Capable of high-speed and high-feed cutting thanks to its rigid short blade length. Enables reductions in lead time during mass production machining.
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
3 ~ 12 | 4.5 ~ 18 | - | 6 ~ 12 | 4 | 50 ~ 75 | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | Standard torsion (30-40°) | Plane / Side / Groove / Inclined Cuts | TiAlN | With Lead | Square |
From: 765,829 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
CPR 2-Flute Long Neck Square for Resin Machining [Alteration Supported Product]
UNION TOOL
[Features]· Long Neck End Mill for Resin Processing· Ideal for deep grooving thanks to the undercut processing of the neck part
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
0.5 ~ 6 | 1 ~ 12 | 2 ~ 63 | 3 ~ 6 | 2 | 38 ~ 120 | Aluminum[○] / Copper[◎] / Resin[◎] | Standard torsion (30-40°) | Plane / Side / Groove / Inclined Cuts | Non-Coated | Sharp Edge / With Lead | Long-Neck Square |
From: 728,059 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
BrandNhãn hiệu |
---|
Product SeriesDòng sản phẩm |
CADCAD |
From |
Days to ShipSố ngày giao hàng |
SpecificationsĐặc điểm kĩ thuật |
Blade diameter (D)(φ) |
Blade length (ℓ)(mm) |
Underneck length (ℓ1)(mm) |
Shank diameter (d)(mm) |
Number of flutes(sheet) |
Overall Length (L)(mm) |
work material |
Torsion Angle (θ) |
Machining Application |
Coating |
Blade tip shape |
Type |
You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | |
BrandNhãn hiệu | OSG | OSG | MISUMI | MISUMI | MISUMI | YG 1 | MISUMI | MISUMI | OSG | NACHI(FUJIKOSHI) | MISUMI | NACHI(FUJIKOSHI) | OSG | MISUMI | OSG | UNION TOOL | OSG | NS TOOL | YG 1 | OSG | MISUMI | NS TOOL | OSG KOREA CORP | HANSONG M&T | THE CUT | MISUMI | OSG | OSG | KABUSYUUKOUGU | OSG | MISUMI | MISUMI | OSG | UNION TOOL | YG 1 | OSG KOREA CORP | MISUMI | MISUMI | OSG | HANSONG M&T | MISUMI | NACHI(FUJIKOSHI) | OSG | OSG | UNION TOOL |
Product SeriesDòng sản phẩm | Micro Grain Carbide End Mills WXL Coated 2 Flutes (3D Type)_WXL-3D-DE | XAL series carbide square end mill, 4-flute / 3D Flute Length (regular) model | XAL series carbide square end mill, 2-flute / 2D Flute Length (short) model | XAL Coated Carbide Long Neck Square End Mill, 2-Flute / Long Neck Model | XAL series carbide square end mill, 4-flute / 2D Flute Length (short) model | TSC series carbide long neck square end mill, 2-flute / long neck model | Micro Grain Carbide End Mills WXL Coated 4 Flutes Short_WXL-EMS | XAL series carbide multi-functional square end mill, 4-flute, 45° torsion / short model | ULTRA WX Micro Grain Carbide End Mills TiAlN Coated 3 Flutes Stub for Slotting_WX-SHTSS | XAC series carbide roughing end mill, fine pitch / regular model | Micro Grain Carbide End Mills WXL Coated 2 Flutes Long Neck Short_WXL-LN-EDS | C-CES4000, UT Coat, 4-Flute Square [Alteration Supported Product] | ULTRA FX Micro Grain Carbide End Mills TiAlN Corted 2 Flutes for Counterboring_FX-ZDS | Carbide Square End Mill, 2-Flute / 0.01 mm Designation Model | Variable Lead End Mill For Difficult-To-Cut Materials, IC4DMC | Regular Grain Carbide End Mills 3 Flutes Short for Copper and Aluminum Alloys_CA-ETS | 4-Flute Short (Strong Heavy Cutting Type), WX-PHS [Alterations Available] | (Economy series) XAL series carbide square end mill, 2-flute / 3D Flute Length model | Micro Grain Carbide End Mills WXL Coated 2 Flutes (2D Type)_WXL-2D-DE | CPS 2-Flute Square for Resin Machining [Alteration Supported Product] | XAL Coated Carbide Long Neck Square End Mill, 4-Flute / Long Neck Model | Micro Grain Carbide End Mills WXL Coated 4 Flutes Long Neck Short_WXL-LN-EMS | VAC Series Carbide 4-Flute Square End Mill (Extra-Long Model) | ULTRA FX Micro Grain Carbide End Mills TiAlN coated 4 Flutes Extra Long_FX-MG-EXML | ULTRA WX Micro Grain Carbide End Mills TiAlN coated 4 Flutes Stub (Corner Protect Type)_WX-G-EMSS | CPR 2-Flute Long Neck Square for Resin Machining [Alteration Supported Product] | |||||||||||||||||||
CADCAD | |||||||||||||||||||||||||||||||||||||||||||||
From | 558,000 VND | 285,000 VND | 400,120 VND | 428,333 VND Special Price On Sale Till 31/03/2025 | 783,927 VND | 540,666 VND | 1,342,414 VND | 1,478,634 VND Special Price On Sale Till 31/03/2025 | 419,999 VND | 488,848 VND | 1,544,642 VND | 379,275 VND | 491,283 VND | 3,527,303 VND | 820,745 VND | 921,041 VND | 572,324 VND | 843,492 VND | 650,473 VND | 1,167,530 VND | 1,810,000 VND | 201,796 VND | 4,806,328 VND | 1,544,527 VND Special Price On Sale Till 31/03/2025 | 285,000 VND | 563,011 VND | 325,584 VND | 415,957 VND | 671,026 VND Special Price On Sale Till 31/03/2025 | 409,412 VND | 735,245 VND | 890,809 VND | 589,568 VND | 2,164,898 VND | 765,829 VND | 728,059 VND | |||||||||
Days to ShipSố ngày giao hàng | 10 Day(s) or more | Same day or more | Same day or more | Same day or more | Same day or more | Same day or more | Same day or more | 4 Day(s) or more | Same day or more | 6 Day(s) or more | Same day or more | Same day or more | 6 Day(s) or more | Same day or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 4 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | Same day or more | Same day or more | 6 Day(s) or more | 7 Day(s) or more | 4 Day(s) or more | 6 Day(s) or more | 15 Day(s) | 4 Day(s) or more | 6 Day(s) or more | Same day or more | Same day | Same day or more | 6 Day(s) or more | 4 Day(s) or more | 5 Day(s) or more | Same day or more | 4 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 4 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more |
SpecificationsĐặc điểm kĩ thuật |
|
|
|
|
|
|
|
|
|
|
| ||||||||||||||||||||||||||||||||||
Blade diameter (D)(φ) | 3 ~ 12 | 0.1 ~ 20 | 1 ~ 20 | 0.1 ~ 20 | 0.1 ~ 6 | 1 ~ 20 | 1 ~ 20 | 0.1 ~ 6 | 1 ~ 30 | 0.2 ~ 6 | 2 ~ 20 | 1 ~ 18 | 3 ~ 12 | 6 ~ 20 | 0.1 ~ 12 | 1 ~ 20 | 3 ~ 20 | 0.1 ~ 12 | 3 ~ 20 | 12 ~ 20 | 3.15 ~ 19.99 | 1 ~ 12 | 1 ~ 25 | 1 ~ 20 | 2 ~ 20 | 2 ~ 12 | 3 ~ 20 | 4 ~ 6 | 1 ~ 20 | 6 ~ 10 | 0.1 ~ 20 | 3 ~ 10 | 0.1 ~ 30 | 0.3 ~ 12 | 1 ~ 20 | 0.1 ~ 25 | 3 ~ 12 | 1 ~ 6 | 1 ~ 10 | 0.1 ~ 20 | 1.5 ~ 25 | 1 ~ 20 | 3 ~ 30 | 3 ~ 12 | 0.5 ~ 6 |
Blade length (ℓ)(mm) | 8 ~ 26 | 0.3 ~ 60 | 3 ~ 60 | 0.2 ~ 40 | 0.2 ~ 9 | 3 ~ 115 | 2 ~ 40 | 0.2 ~ 10 | 2.5 ~ 45 | 0.3 ~ 9 | 5 ~ 38 | 2.5 ~ 32 | 4.5 ~ 18 | 16 ~ 38 | 0.15 ~ 18 | 2.5 ~ 50 | 8 ~ 38 | 0.15 ~ 30 | - | 50 | 3.5 ~ 48 | 1.5 ~ 18 | 2.5 ~ 45 | 2 ~ 125 | 4 ~ 45 | 5 ~ 30 | 8 ~ 38 | 11 ~ 13 | 3 ~ 45 | 18 ~ 30 | 0.3 ~ 60 | 10 ~ 25 | 0.2 ~ 60 | 0.9 ~ 36 | 3 ~ 55 | 0.2 ~ 45 | 12 ~ 30 | 1.5 ~ 9 | 1.5 ~ 15 | 0.2 ~ 45 | 6 ~ 120 | 1.5 ~ 30 | 20 ~ 112 | 4.5 ~ 18 | 1 ~ 12 |
Underneck length (ℓ1)(mm) | - | - | - | - | 0.3 ~ 60 | - | - | 0.3 ~ 60 | - | 0.5 ~ 60 | - | - | - | - | 0.3 ~ 60 | - | - | - | - | - | - | 3 ~ 36 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 4 ~ 50 | 4 ~ 80 | - | - | - | - | - | 2 ~ 63 |
Shank diameter (d)(mm) | 6 ~ 12 | 4 ~ 20 | 4 ~ 20 | 3 ~ 20 | 4 ~ 6 | 6 ~ 20 | 4 ~ 20 | 4 ~ 6 | 4 ~ 32 | 4 ~ 6 | 4 ~ 20 | 3 ~ 20 | 6 ~ 12 | 6 ~ 20 | 4 ~ 12 | 4 ~ 20 | 6 ~ 20 | 4 ~ 12 | 6 ~ 20 | 12 ~ 20 | 6 ~ 20 | 4 ~ 12 | 6 ~ 25 | 6 ~ 20 | 4 ~ 20 | 3 ~ 12 | 6 ~ 20 | 6 | 4 ~ 20 | 6 ~ 10 | 3 ~ 20 | 6 ~ 10 | 4 ~ 32 | 3 ~ 12 | 6 ~ 20 | 4 ~ 25 | 6 ~ 12 | 4 ~ 6 | 4 ~ 10 | 3 ~ 20 | 4 ~ 25 | 4 ~ 20 | 6 ~ 32 | 6 ~ 12 | 3 ~ 6 |
Number of flutes(sheet) | 4 | 2 | 4 | 2 | 2 | 3 | 4 | 2 | 4 | 2 | 4 | 4 | 3 | 3 ~ 4 | 2 | 4 | 2 | 2 | 3 ~ 5 | - | 2 | 3 | 4 | 3 | 4 | 3 | 3 | 4 | 4 | 4 ~ 6 | 2 | 4 ~ 6 | 2 | 2 | 2 | 2 | 4 | 4 | 4 | 2 | 4 | 3 | 4 | 4 | 2 |
Overall Length (L)(mm) | 60 ~ 90 | 45 ~ 130 | 45 ~ 130 | 40 ~ 110 | 50 ~ 100 | 40 ~ 200 | 40 ~ 110 | 40 ~ 100 | 40 ~ 125 | 45 ~ 120 | 45 ~ 125 | 38 ~ 100 | 50 ~ 75 | 57 ~ 104 | 45 ~ 140 | 45 ~ 110 | 50 ~ 125 | 45 ~ 80 | - | 110 | 40 ~ 105 | 45 ~ 80 | 40 ~ 120 | 40 ~ 220 | 50 ~ 100 | 50 ~ 100 | 50 ~ 105 | 60 | 50 ~ 100 | 68 ~ 80 | 40 ~ 110 | 60 ~ 80 | 45 ~ 140 | 45 ~ 100 | 50 ~ 110 | 40 ~ 120 | 50 ~ 90 | 50 ~ 100 | 45 ~ 150 | 45 ~ 100 | 60 ~ 250 | 40 ~ 100 | 60 ~ 225 | 50 ~ 75 | 38 ~ 120 |
work material | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[◎] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Copper[◎] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Copper[◎] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○] | Aluminum[◎] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Copper[◎] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[◎] | general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○/◎] / Aluminum[◎] / Copper[◎] / Resin[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[◎] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] / Copper[◎] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Titanium[◎] | Aluminum[◎] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | Aluminum[◎] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] | - | general steel[○] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Titanium[○] | general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○] / Cast Iron[◎] | Aluminum[◎] / Copper[◎] / Resin[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[◎] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[◎] | - | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○/◎] / Aluminum[◎] / Copper[◎] / Resin[○] | general steel[○] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○] / Cast Iron[◎] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[◎] | Aluminum[○] / Copper[◎] / Resin[◎] | Aluminum[◎] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[◎] | - | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | Aluminum[○] / Copper[◎] / Resin[◎] |
Torsion Angle (θ) | Variable lead | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Powerful Torsion (45°-60°) | Standard torsion (30-40°) | Standard torsion (30-40°) / Powerful Torsion (45°-60°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Powerful Torsion (45°-60°) | Standard torsion (30-40°) | Powerful Torsion (45°-60°) | Weak torsion (15 to 25˚) | Standard torsion (30-40°) | Standard torsion (30-40°) | Weak torsion (15 to 25˚) | Standard torsion (30-40°) | - | Standard torsion (30-40°) | Standard torsion (30-40°) | Powerful Torsion (45°-60°) | Standard torsion (30-40°) | 45° | Variable lead | Powerful Torsion (45°-60°) | Standard torsion (30-40°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | - | Standard torsion (30-40°) | Powerful Torsion (45°-60°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Powerful Torsion (45°-60°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | 30° | - | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) |
Machining Application | Side / Groove / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Inclined Cuts | Plane / Side / Groove / Inclined Cuts / Countersinking | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Countersinking | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | - | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | - | Side / Groove | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Side / Groove | - | Plane / Side / Groove / Inclined Cuts | Plane / Side / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Inclined Cuts | Plane / Side / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | - | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts |
Coating | - | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | Non-Coated | For General Steels (AlCrN, etc.) | For High Hardness (Silicon Group) | For General Steels (AlCrN, etc.) | TiAlN | For General Steels (AlCrN, etc.) | TiAlN | TiAlN | TiAlN | For General Steels (AlCrN, etc.) | TiCN | TiAlN | TiAlN | TiAlN | DLC | Non-Coated | Non-Coated | FX | Non-Coated | - | For High Hardness (Silicon Group) | Non-Coated | TiAlN | TiAlN | Dia Coat | For General Steels (AlCrN, etc.) | For High Hardness (Silicon Group) | For General Steels (AlCrN, etc.) | Non-Coated | Non-Coated | FX | TiAlN | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | TiSiN | - | For General Steels (AlCrN, etc.) | TiAlN | TiAlN | Non-Coated |
Blade tip shape | - | Sharp Edge / With Lead | Sharp Edge / With Lead | Sharp Edge / With Lead | Sharp Edge / With Lead | - | Sharp Edge / With Lead | Sharp Edge / With Lead | Sharp Edge / With Lead | Sharp Edge | With Lead | Sharp Edge | With Lead | C plane | Sharp Edge / With Lead | With Lead | With Lead | With Lead | - | - | Sharp Edge / With Lead | With Lead | - | - | - | With Lead | With Lead | With Lead | - | - | Sharp Edge / With Lead | Micro R | Sharp Edge | With Lead | - | - | Sharp Edge | Sharp Edge / With Lead | With Lead | - | - | With Lead | With Lead | With Lead | Sharp Edge / With Lead |
Type | Square | Square | Square | Square | Long-Neck Square | Square | Square | Long-Neck Square | Square | Long-Neck Square | Square | Square | Square | Roughing | Long-Neck Square | Square | Square | Square | Roughing | Square | Square | Square | Square | High Helical | Square | Square | Square | Square | Square | Square | Square | High Helical | Square | Square | Square | Square | Square | Long-Neck Square | Long-Neck Square | Square | Square | Square | Square | Square | Long-Neck Square |
Loading...Tải…
[4-75/1mm Unit(s)]
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy