Square Connectors（Connection direction：Straight Page4）

MX10 Series

JAPANAVIATION

Our MX9 series of connectors boasts an impressive track record of use with air bags, and has been miniaturized for improved space saving.

MX19 Series

JAPANAVIATION

[Features]· A connector for small waterproof wire relays applicable to JISD0203S.

MX23A Series, Contact

JAPANAVIATION

[Features]· A small low-profile connector, which can be widely used in vehicles, motor bikes and other types of waterproof equipment.

MX31 Series

JAPANAVIATION

The number of pins in these connectors has increased along with the greater role of electronic control in automobiles. In addition, this non-waterproof, high-density type connector fulfills the need for a small and lightweight product.[Features][High-density implementation achieved with a large number of pins]· These composite-type connectors include both signal (2.2 A) and power (5.7 A) internal circuits in the same connectors. These four-row type connectors are small, highly dense, and include a large number of pins with a 2.2 mm contact pitch (for signals), 3.2 mm contact pitch (for power), and up to a maximum of 135-pin connectors. Multiple socket connectors are combined together on the wire side for each single pin header on the circuit board side.[Mechanical lock structure ensures secure fitting]· The mechanical lock structure protects against vibrations and pulling. A distinct click sound helps confirm that secure fitting has occurred.[Double locking structure reliably prevents loss of contact]· Contact with the socket housing is maintained via a housing lance and an internal retainer contained in the housing. This double locking structure, which locks at two locations, reliably prevents loss of contact due to vibration or pulling.· The retainer's structure ensures that a contact cannot be set into the locking position unless it is completely inserted. This makes it possible to detect partial insertion of contacts.[Low insertion force structure with easy insertion and extraction]· A low insertion force type structure requiring 70 N or less of force per socket housing to achieve insertion makes insertion and extraction easy.[Tin and gold plating are available for the contact finish]· The standard finish for contacts is tin plating. Gold plating is also available for 135-pin pin headers, offering a higher level of contact reliability.[Misconfiguration-prevention ...

MX34 Series

JAPANAVIATION

These are non-waterproof, small-type board-to-cable connectors developed mainly for on-board use.[Features]・A small-type/high density connector with abundant variations.A small-type/high density connector with 2.2 mm (8 turns = 4 mm) contact pitch and 025 tab size.・Single-row / two-row types are available supporting 3–40 pins.・Furthermore, in addition to the through-hole type, circuit board pin connector, the SMT type (straight, 20/32 pins) is also available. This type is compatible with automatic mounting, allowing for a variety of connection formats.・Reliable mating due to mechanical locking structure.・The mechanical locking structure is resistant to vibration and pulling. Simply inserting the plug creates a clicking sound that ensures the lock is secured. This allows users to confirm proper mating even when visibility is restricted.・Double-layered stop construction to prevent contact removal.・Preserving the contact inside the housing involves a double-layer construction consisting of a primary stopping housing lance and a secondary, internal preset, socket housing retainer. This effectively prevents disconnection through vibrations and pulling.・ Furthermore, the retainer is constructed so that its locking position cannot be set if the contact is not fully inserted. This allows for the detection of semi-inserted contacts.・The socket lock is protected by a unique housing structure.・A bridge is installed around the upper portion of the clock lever in the socket housing. This prevents warping and other lock lever damage when an external load is applied when cable harnesses are bundled together.・High-reliability socket contact・The contact is a box-style unit that is resistant to the effect of external power fluctuations, etc.・The contacts have a double layer coil construction and are strongly resistant against prying. This is a highly reliable model that ensures a stabl...

MX36 Series

JAPANAVIATION

This is a small waterproof relay connector that was developed for automotive airbags.[Features]・Small waterproof wire-to-wire (relay) connector· Contact tab size 025・For wire-to-wire (relay) connections ・Small, waterproof crimping type▪ For different types of air bags.

MX44 Series

JAPANAVIATION

[Features]· A small, waterproof connector for board-to-wire connections to support the increasing demand for compact automotive connectors.

QX Series

JAPANAVIATION

[Features]· A small, lightweight, highly reliable, square shape multipole connector.

3M^TM 2.0-mm Pitch I/O Connector, Wire-Mount Receptacle

3M

A rectangular connector with a unique contact shape that takes into consideration soldering workability.[Features]・ 2.0-mm pitch 6-pole connector for connecting cables in industrial equipment・ Both large diameter cable connection and space saving are achieved・ EMI/ESD countermeasure product・ Compatible with various servo encoder connections・ Compatible with a wide range of cable sizes from #16 to #28 AWG・ Achieves improved work efficiency and quality stability by product design that takes cable connection work into consideration

3M^TM SCR Connector Wire Mount Plug

3M

[Features]・ Bellows type contacts with excellent twisting force and vibration resistance・ Achieves both miniaturization and support for large diameter cables with a contact pitch of 2-mm and a special solder tail arrangement・ 0.75 mm2 cable can be connected to all contacts・ Unique contact shape considering soldering workability[Applications]・ 2.0-mm pitch I/O connector for cable connection between devices for combination with a dedicated shell kit

3M^TM Delta Connector for 1.27-mm Pitch Flat Cable

3M

[Features]· Compatible with 1.27-mm pitch flat cables and round cables with processed flat tips.· Also supports connection by bulk pressure welding and daisy chains.· Low-profile design.

3M^TM Mini-Camera Link Standard-Compliant PCB Mount Connector Receptacle

3M

[Features]· A board mounting connector receptacle—compatible with the Mini-Camera Link standard.

3M^TM Miniature Delta Ribbon (MDR) System Non-Shielded Plug

3M

[Features]· Half-pitch I/O connector "Industry Standard Product" MDR system.· Low insertion removal force and torsion countermeasures through use of pre-force style cantilever contact ensures high reliability.· A bulk pressure welding structure—by proprietary 'hill & dale' method—on 0.635-mm pitch flat cable.· Compatible with daisy chain connections using intermediate pressure welding connection.· Low-profile design using strain relief—which also serves as a single-action lock.· Optimally suited for expanding bus signals by MDR within the device.

3M^TM Miniature Delta Ribbon (MDR) System Surface Mount Receptacle

3M

[Features]· Half-pitch I/O connector "Industry Standard Product" MDR system.· A single row surface mounting solder tail is used to easily achieve circuit board wiring with good transfer properties.· The contact lengths of the upper and lower columns are equal, and the skew of the contact portion is essentially zero.· Crosstalk prevention and impedance matching taken into account.

17JE Series Straight DIP Type

DDK

Straight DIP type connector which can be mounted vertically on a PCB.

CAD ：

2D

57GE Series Straight DIP Ribbon Receptacle.

DDK

[Features]・The 57GE series consists of straight DIP-type connectors with fittings covered by a metal shell, which is a countermeasure against electromagnetic radiation that helps to reduce noise.・Type 40 (receptacle for I/F).

CAD ：

2D

Miniature Low-Profile Interface DN Connector

HIROSE ELECTRIC

This small, multi-pin rectangular connector was developed to support the miniaturization of electronic devices, and thinner devices in particular[Features]· The terminal's wire connector is arrayed in a 2.54 mm grid that makes it easy to design circuits on a printed circuit board.· The structure of the terminal is based on the manufacturer's SM series (D-sub connectors). This gives the terminal dependable quality.· The single-action lock mechanism provides excellent operability.· The cover case is designed to be thin and compact and features a low profile in order to meet the needs of high-density mounting. Mounting with 17.78 mm (700 mils) between circuit boards is possible.· The cover case is made of an aluminum die casting offering good electromagnetic shielding characteristics. Combined with the connector's metal shell, the above configuration ensures that noise is reduced.· The dip connector includes a snap (circuit board temporary joint) bracket.· Pressure Connecting type supports connection of two wire types, AWG 26 and 28, via pressure welding, for use with standard 1.27-mm pitch cables.· Crimping type can be used to perform crimping of AWG 26 to 28 wiring.· Depending on the application, cable can be extracted in either the vertical or horizontal direction.

Han A Series Connector (Screw Type Wire Connection)

HARTING

This is a compact type in the Han series. Space saving, and screw-type connection does not require special tools (Models are separated using "-" rather than spaces)..

Han Q Series Connector (Crimp Connection)

HARTING

This series is even smaller than the Han A series. Saves space, as the connector outer diameter is the same size even if the number of wires increases (Models are separated using "-" rather than spaces).

Han D / DD Series Connector (Crimp Connection)

HARTING

Available in a wide range of variations in the number of pins. Ideal power source connector for use in harsh environments. Crimp connection for reliable connection (Models are separated using "-" rather than spaces).

Han E / EE Series Connector (Screw Type / Crimp Connection)

HARTING

Available in a wide range of variations in the number of pins. Ideal power source connector for use in harsh environments. Screw connection does not require special tools (Models are separated using "-" rather than spaces).

2.00-mm Pitch Serial I/O Connector

MOLEX

A Molex 2.0 mm pitch connector for external relay connection.

CRC Compact Robot Connector (51233)

MOLEX

A Molex connector which support currents of 7.0 to 15.0 A. Maximum number of pins: 50. Ideal for industrial robots and FA applications (compatible housings: 51239/54332)

CRC (Compact Robot Connector) (51238)

MOLEX

A Molex connector which support currents of 7.0 to 15.0 A. Maximum number of pins: 50. Optimal for industrial robots and FA applications (compatible housings: 51234/55836)

CRC™ (Compact Robot Connector) (54332)

MOLEX

Molex models work with 7.0 A to 15.0 A currents and have a maximum pole number of 50. Optimal for commercial robots and FA-related applications (mating housing: 51233)

CRC™ (Compact Robot Connector) (54333)

MOLEX

Molex models work with 7.0 A to 15.0 A currents and have a maximum pole number of 50. Optimal for commercial robots and FA-related applications (mating housing: 51238)

CRC™ (Compact Robot Connector) (55836)

MOLEX

Molex models work with 7.0 A to 15.0 A currents and have a maximum pole number of 50. Optimal for commercial robots and FA-related applications (mating housing: 54333/54334)

CRC, Compact Robot Connector (56377)

MOLEX

Molex models work with 7.0 A to 15.0 A currents and have a maximum pole number of 50. Ideal for industrial robots and FA-related applications (compatible housings: 55890 / 51300 / 51233 / 51238)

One-Touch Lock D-Sub Hood

PROVERTHA

One-touch attachment and detachment of the Dsub connector will be possible. Can be installed freely using 3 connection accessories (locking bolts).

CK / CKS Small Screw Type and Spring Type 10A / 250 V Insert

ILME

CK / CKS Small screw type / spring type, 10A / 250 V, Insert[Features]・CK/CKS.・Small screw type / spring type.▪ 10A/250 V insert

CP High Current Screw Type 35A / 690V Insert

ILME

CP, high current screw type, 35A / 690V insert[Features]・CP・High current spring type.▪ 35A / 690V.▪ Insert

CSS Spring Type Dual Terminal Insert 16A / 500V

ILME

CSS spring type dual terminal insert 16A / 500V[Features]· Insert / spring type dual wire (two wires can be connected to a single lead)

MSM Series, Burndy Connector, Cable and Circuit Board Implementation Type

SOURIAU

MSM series, Burndy connector, Cable/circuit board implementation type[Features]▪ High-performance cable connector. ▪ This rectangular connector can be used for wire-to-wire and wire-to-board connections, and more. ▪ 8 types from 14 core to 75 core.▪ Supports a wide variety of needs, with various lock types, jack screws, guiding pins, levers, and numerous cable clamps. ▪ The MSM Burndy connector is compliant with MIL-C-28748, NFC93426, and HE621-622.

D-Sub Connectors XM3-L/XM2-L/XM4K/XM4L

OMRON

[Features]・ This D-sub connector series has been renewed with lead-free compatible products.・ The fastening screw diameter can be identified from its external appearance.・ A solution to problems associated with combining fasteners has been found.・ Shielded connectors for EMI countermeasures.▪ This is a UL standard (File No.E103202) certified product (except for XM4Z type).

Han Waterproof Connector DD Type Connector (Crimp Connection)

HARTING

Han D/DD Series connector (crimp connection).[Features]·High density contact··Supports requirements up to 250V/10A·Save time with quick connection using crimp contacts·Gold-plated and silver-plated contacts available·Compatible with thermo and 1mm FO contacts

HIF3 Series MIL Standard Compliant Housing

HIROSE ELECTRIC

HIF3 Series MIL Standard Compliant Housing

RS Pro D-sub connector (solder terminal) female

RS Pro

RS Pro brand. High-quality solder D-sub connector.

Back Shell for D-sub Connector

RS Pro

RS Pro brand. High-quality D-sub connector shell.

TE Connectivity, Connector Housing, MULTILOCK, 025 Series, 2 Rows

TE Connectivity

[Features]·High density and compact design with 2.2 mm pitch·It supports male or female terminals and is equipped with a contact retainer block to guarantee the terminal position·Polarity prevents mis-mating·Color coded for easy identification·Male/female terminals for TH025 series connector housings are sold separately[Application]·Vehicle safety security system, convenience, driver information, body/chassis system·Mirrors, multimedia applications, display screens, airbag ECU / safety applications, switches, body controller management, dashboard applications, etc.

Connector Housing, AMP Universal Power Series, 3.96 mm

TE Connectivity

[Features]·TE Connectivity Universal Power connector housing·Product made of nylon with 3.96-mm centerline and latching mating connector lock·Receptacle type for tab contacts and a plug type for socket contacts are available·To be used with contacts, representative stock number 683-1336

[Ilme Insert]CDD 10 A/250 V High Density Crimp Type

ILME

[Features]・ This is a standard Series of general-purpose Ilme’s connectors.・ It can be used with higher density and space-saving wiring.・ Normally, it can be used up to 250 V, but it can be used at higher voltage (500 V) by reducing the number of contact pins used and arranging it properly.

[Ilme Insert]CDS 10 A/250 V High Density Spring Type

ILME

[Features]・ It realized multi-pin and miniaturization.・ Achieved higher density than conventional screw-type/spring-type wiring, and more poles can be used in the same connector.

[Ilme Enclosure]T Type IP66 Resin / Insulation Series

ILME

[Features]・ The T type insulation enclosure is a resin enclosure compatible with traditional metal enclosures.・ Complete insulation (equivalent to Class II) unique to resin, weight reduction of up to 75%It achieved a 20% cost reduction while combining chemical resistance and impact resistance.

[Ilme Insert]CX, Supports High Current, Composite Type

ILME

High-current connector solution: A high-precision machined contact with crimping technology that achieves high reliability and low contact resistance has made it possible to convert power lines into connectors.This product offers various advantages by changing the connection of a high current power line such as in a motor or welding from a terminal block to a connector.[Features]・ Low contact resistance due to high-precision machined contact. (0.2 mΩ/200 A type)・ High tensile strength by crimping technology. (For 336 kgf/50 mm 2 copper wire)・ Reduction of total cost by reducing terminal block enclosure and peripheral devices.・ High maintainability due to easy insertion and removal.

[Ilme Insert]CQ 6.5-40 A/50-400 V Crimp Type

ILME

Single-action, ultra-high density connector CQ Series.[Features]・ High reliability and operability are important for information wiring such as teach pendants and operation panels, which are frequently accessed by users.・ The CQ Series, which uses the proven Ilme rectangular connector technology, improves usability and reliability.