Powdered High-Speed Steel Roughing End Mill, Short, Center Cut / Non-Coated Model
:
MISUMI
[Features]
·Uncoated short flute length type of high speed steel powder roughing that expect durability
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.
Specifications
Model Number
PM-RFPS
| Outer Diameter D | Flute Length ℓ | Overall Length L | Under Neck Angle θ | Shank Diameter d | Corner Chamfering C | Number of Flutes Z |
| 5 | 13 | 57 | 15° | 6 | — | 3 |
| 6 | 13 | 57 | — | 6 | — | 3 |
| 7 | 16 | 66 | 15° | 10 | — | 3 |
| 8 | 19 | 69 | 15° | 10 | — | 4 |
| 9 | 19 | 69 | 15° | 10 | — | 4 |
| 10 | 22 | 72 | — | 10 | — | 4 |
| 11 | 22 | 79 | 15° | 12 | 0.2 ~ 0.7 | 4 |
| 12 | 26 | 83 | — | 12 | 0.2 ~ 0.7 | 4 |
| 13 | 26 | 83 | — | 12 | 0.2 ~ 0.7 | 4 |
| 14 | 26 | 83 | — | 12 | 0.2 ~ 0.7 | 4 |
| 15 | 26 | 83 | — | 12 | 0.2 ~ 0.7 | 4 |
| 16 | 32 | 92 | — | 16 | 0.3 ~ 0.9 | 4 |
| 17 | 32 | 92 | — | 16 | 0.3 ~ 0.9 | 4 |
| 18 | 32 | 92 | — | 16 | 0.3 ~ 0.9 | 4 |
| 19 | 32 | 92 | — | 16 | 0.3 ~ 0.9 | 4 |
| 20 | 38 | 104 | — | 20 | 0.3 ~ 0.9 | 4 |
| 22 | 38 | 104 | — | 20 | 0.3 ~ 0.9 | 4 |
| 25 | 45 | 121 | — | 25 | 0.3 ~ 0.9 | 4 |
| 28 | 45 | 121 | — | 25 | 0.3 ~ 0.9 | 5 |
| 30 | 45 | 121 | — | 25 | 0.3 ~ 0.9 | 5 |
| 32 | 53 | 133 | — | 32 | 0.3 ~ 0.9 | 6 |
| Outer Diameter D | Tolerance |
| 5, 6 | ±0.060 |
| 7 ~ 10 | ±0.075 |
| 11 ~ 18 | ±0.090 |
| 19 ~ 30 | ±0.105 |
| 32 | ±0.107 |
For Cutting Conditions, Refer to >>Click here.