Locating Pins Large Head, Spherical, Tapped

The locating pin is used for the spatial positioning in the directions of X and Y axes, mainly using the workpiece hole as the positioning benchmark or used in conjunction with bushings, in which the large head spherical tapped type is easy to assemble and disassemble, and effectively ensures that the workpiece is smoothly guided into the positioning position.

■Material Specification Table

Material No.	Material	Surface Treatment	Hardness	P Dimension Fixed		P Dimension Configurable		P/L/B Dimension Configurable
				Type	Shape Code	Type	Shape Code	Type	Shape Code
①	SKS3 Equivalent	-	Quenching hardness 60～63HRC	E-JPQT	BB(Round)	E-JPQT	A(Round) D(Diamond)	E-FPQT	A(Round) D(Diamond)
②	SKS3 Equivalent	Hard Chrome Plated	Quenching hardness 50～55HRC	-		E-GJPQT		E-GFPQT
③	SUS304 Equivalent	-	-	E-SJPQT		E-SJPQT		E-SFPQT
④	SUS304 Equivalent	Hard Chrome Plated	-	-		-		E-HFPQT
⑤	SUS440C Equivalent	-	Quenching hardness 50～55HRC	E-CJPQT		E-CJPQT		E-CFPQT
⑥	SKS3 Equivalent	Buffed	Quenching hardness 60～63HRC	-		E-MJPQT		E-MFPQT
⑦	SKS3 Equivalent	Hard Chrome Plated + Buffed	Quenching hardness 60～63HRC	-		E-MGJPQT		E-MGFPQT
⑧	SUS440C Equivalent	Buffed	Quenching hardness 50～55HRC	-		E-MCJPQT		E-MCFPQT

Hard chrome plating: Plating hardness 750HV～
If there are requirements on rust prevention, give priority to the hard-chrome plated products, products with surface treatment of electroless nickel plating or products made of austenitic stainless steel.
Please visit MISUMI website for details of the models available for sale.

■P Dimension Fixed

Part Number				P Selection														L	B	M (Coarse Thread)	ℓ
Type	Shape	D	D Dimension Tolerance g7
E-JPQT E-SJPQT E-CJPQT	BB (Round)	6	-0.004 -0.016	7	8	9	10											10	8	M3	5
		8	-0.005 -0.020			9	10	11	12	13								15		M5	8
		10						11	12	13	15								10
		12	-0.006 -0.024								15	16
		16											18	19	20	24	25	22		M8	12

■P Dimension Configurable

Part Number				P 0.01mm increments	L	B	M (Coarse Thread)	ℓ	(W)
Type	Shape	D	D Dimension Tolerance g7
E-JPQT E-GJPQT E-SJPQT E-CJPQT (Buffed) E-MJPQT E-MGJPQT E-MCJPQT	A (Round) D (Diamond)	5	-0.004 -0.016	5.50~8.00	10	6	M2	3	2.2
		6		6.50~10.00		8	M3	5	3.0
		6T					M2.6	4
		8	-0.005 -0.020	9.00~13.00	15		M5	8	3.5
		8T					M4	6
		10		11.00~15.00		10	M5	8	4.0
		12	-0.006 -0.024	13.00~16.00					5.0
		13		14.00~18.00	22		M8	10	5.5
		16		17.00~25.00				12	7.0
		20	-0.007 -0.028	22.00~30.00	30	15			9.0

■P/L/B Dimension Configurable

Part Number				P 0.01mm increments	L 1mm increments	B 0.1mm increments	M (Coarse Thread)	ℓ	(W)
Type	Shape	D	D Dimension Tolerance g7
E-FPQT E-GFPQT E-SFPQT E-HFPQT E-CFPQT (Buffed) E-MFPQT E-MGFPQT E-MCFPQT	A (Round) D (Diamond)	5	-0.004 -0.016	5.50~8.00	5(9)～10	2.0~10.0	M2	3	2.2
		6		6.50~10.00	6(9)～12	1.5～15.0(12.0)	M3	5	3.0
		6T				2.0~12.0	M2.6	4
		8	-0.005 -0.020	8.50~15.00	8(12)～16	1.5～15.0(12.0)	M5	8	3.5
		8T			6(12)～16		M4	6
		10		11.0~17.00	10(12)～20	3.0～30.0(20.0)	M5	8	4.0
		10T			6(12)～16		M4	6
		12	-0.006 -0.024	13.00~18.00	12~24	3.0～30.0(20.0)	M5	8	5.0
		12T			8(12)～18		M4	6
		13		14.00~20.00	13(14)～26	5.0～30.0(20.0)	M8	10	5.5
		13T			8(14)～20		M6	9
		16		17.00~27.00	16~32	5.0～30.0(27.0)	M8	12	7.0
		16T			10(14)～24		M6	9
		20	-0.007 -0.028	22.00~30.00	20~40	5.0~30.0	M8	12	9.0
		20T			12(18)～30		M6	9

Pins of D dimension with T have one size smaller thread diameter and larger wall thickness. (Actual D dimension is the number without "T".)
L dimension in ( ) applies to Diamond Shape.
Note the strength of under-head part.Strength Reference for Under-head Part
Please confirm pilot hole depth.Pilot Hole Depth Reference. Holes may go through.

①Dimensional tolerance and fit parameter table For details, click Dimensional Tolerance Fit Table
②Reference table for common dimensions without indicated tolerance (medium accuracy m) For details, click Table of Dimensions Without Indicated Tolerance
③Reference value for thread installation torque The tightening torque (reference value) is the strength class (8.8) in the technical data Torque Reference Table, and the tightening state lasts for more than 24 hours. Not applicable when using locking agents or spring washers.

①Positioning technology reference information Click Positioning Technology Reference
②Surface treatment related anti-rust ability salt spray test reference Click Anti-rust Treatment Reference for Metal Surface