Bushings for Locating Pins - Shouldered, Standard / Thin Wall

MISUMI

[Applications]Shoulder type bushing for positioning pins. [Features]Round shape inner diameter specifications.

Bushings for Locating Pins - Shouldered:Related Image

■Standard

[ M ]Material	[ S ]Surface Treatment	[ H ]Hardness	Type
[ M ]Material	[ S ]Surface Treatment	[ H ]Hardness	p6	m6
SKS3 Equivalentlent	-	60HRC~	JBH	JBHM
SKS3 Equivalent	Electroless Nickel Plating	60HRC~	JBHN	JBHMN
SUS440C or 13Cr stainless	-	50HRC~	JBHC	JBHMC

[ ! ]Tolerance of d dimension 2 ~ 6 of electroless nickel plated products is H7.
[ ! ]For hole machining, please note that inner diameter shrinkage of p6 Type is more than that of m6 Type.
(See "Variance of I.D. after Press-fitting Bushings for Locating Pins" on P.1566)

■Thin Wall

[ M ]Material	[ S ]Surface Treatment	[ H ]Hardness	Type
[ M ]Material	[ S ]Surface Treatment	[ H ]Hardness	p6	m6
SUJ2 or SKS3 Equivalent	-	58HRC~	JBHUP	JBHU
SUJ2 or SKS3 Equivalent	Electroless Nickel Plating	58HRC~	JBHUNP	JBHUN
SUS440C or 13Cr stainless	-	50HRC~	JBHUCP	JBHUC

[ ! ]Tolerance of d dimension 3 ~ 6 of electroless nickel plated products is H7.
[ ! ]For hole machining, please note that inner diameter shrinkage of p6 Type is more than that of m6 Type.
(See "Variance of I.D. after Press-fitting Bushings for Locating Pins" on P.1566)