4040, Slot Width 8mm Aluminum Frames

MISUMI

Economy Series Profiles, with different cross-sectional shapes and groove width sizes, can only be matched with Economy Series special accessories starting with L.
Length from 50mm up to 6000mm is available with type LCF8-4040/LCFL8-4040/LCFSL8-4040. Please refer to this page.
>> 【Special Page for LCF8-4040 in Vietnam】
For some items with length over 2800mm, please email to "machinery_bd@misumi.com.vn" to check ability to supply.
CAD drawings of LCFW8-4040 is currently not correct. We're correcting and will update as soon as possible. Please donot use it for design

This is an economy item, The price is cheaper than the MISUMI standard product.

Product Overview

Economy series new products, with different cross-sectional shapes, can only be matched with Economy series special accessories starting with L.
Aluminum alloy profiles with a slot width of 8mm, a side length of 40mm, and one row of slot.

Dimensional Drawing

Material Specification:

Specification Table

■Specified Length

Part Number

Overall Length L

Profile Type

Profile Core

Mass
kg/m

Cross Sectional Moment of innertia

Recommend bracket and accessories 1

Recommend bracket and accessories 2

Type

Profile

ℓx(cm⁴)

ℓy(cm⁴)

Standard Bracket

Bolt

Nut

Heavy load bracket

Bolt

Nut

LCF8**

4040

50 ~ 2000 (6000*)

Standard

Standard Core

1.54

9.7

LBSB8-4040

E-GSCB8-15

LNHRN8-40-8
(Ball spring nut)

LBL5050-40

E-GSCB8-18

LNHRN8-40-8
((Ball spring nut)

LCFY8

50 ~ 2000 (2500)

Standard Yellow

Standard Core

LCFW8

Heavy

Standard Core

1.74

10.2

LCFNL8

Light

Standard Core

1.11

5.5

LCFM8

Round Corner

Light Core

1.28

8.28

LNTRNM8-40-8
(Leaf spring nut)

LCFB8

Black

Light Core

LCFS8

Sand Blast

Light Core

LCFL8**

50 ~ 2000 (6000*)

Light

Light Core

1.12

9.25

LCFLY8

50 ~ 2000 (2500)

Light Yellow

Light Core

LCFSL8**

50 ~ 2000 (6000*)

Supper light

Light Core

0.89

5.06

* 6000mm is availalble for sales in MISUMI Vietnam only.
** For Vietnam market, please check and order in this page.

Maximum selectable length can be checked on configure bar on the left.

As it is a low cost and Economy series product, there may be small scars and defects on the surface. If you have higher requirements for the surface and end face, please select well.

Dimension Tolerance:

Alterations

Alteration	Alteration Symbol	Specification	Machining/Corrensponding Accesories
End Tapping (Center Hole)	LTP/RTP/TPW		Tapping holes on the end face of aluminum profiles
45-Degree Cutting	L□T45/R□T45		Cutting with 45-degree angle.
Drilling Wrench Hole	LWP/RWP		Drilling Wrench holes in fixed positions for Blind joint connections.
Counter boring	Z8/XA		Machining Counterbored holes at any specified positions.
S Hole Blind Joint Dedicated Holes	LSH/RSH		Adding S holes for Pre-Assembly Insertion Double Joint connections. Parts used for this additional processing: Blind Joints, Pre-Assembly Insertion Double Joint Kits
M Hole Blind Joint Dedicated Holes	LMH/RMH		Adding M holes for Post- Assembly Insertion Double Joints,Center Joint connections. Parts used for this additional processing: Blind Joints, Pre-Assembly Insertion Center Joint Kits

Product Features

[Features]
Simple specifications, beautiful appearance

[Intended Use]
Groove width 8mm-40 Series European standard aluminum profile is suitable for frame combination of large hoods, racks and shelves.

Example of Use

Product name	Bracket	Heavy load bracket	Blind Joint	Ball spring nut	Leaf spring nut	Frame cap	Groove cover	U-Shape groove cover
Photo					;
Part Number	LBSB	LBL	LBIS	LNHRN	LNTRNM	LCEC	LMCSG	LMUSB