(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.
Tel: 0222-361-1555
Email: cs@misumi.com.vn
8:00 - 17:00 (Mon - Sat)
Search by Category / Brand Tìm theo danh mục, nhãn hiệu
Search by Category Tìm theo danh mục
- MISUMI Việt Nam đẩy mạnh hợp tác với cơ sở đào tạo nhằm nâng cao chất lượng nguồn nhân lực kỹ sư tương lai. Xem chi tiết.
MISUMI Vietnam cooperates with Training Institutions to enhance the quality of future engineering workforce. See more.
Insert（Screw Type：Metric (Coarse) Thread Page2）
In general, coil inserts that have been machined into a coil shape are very common, but we also have a wide lineup that includes "self-tapping inserts", "inserts for resin", "insert nuts", "locking inserts", etc., enabling use to suit various environments or materials.
MISUMI enables spec searches and ordering quantities from just 1 piece. Tools are also sold in addition to the inserts themselves.
[Materials]
Iron, stainless steel, brass, phosphor bronze, Inconel, nitronics
[Size]
M1.4 to M39 are available as well as imperial sizes
[Search Keywords]
Heli-Sert, E-Sert, Sprue, Female Thread
Search by specifying the lower class categoryTìm kiếm bằng cách chỉ định danh mục lớp thấp hơn
Brand |
|
|---|---|
| CAD |
|
| Days to Ship |
|
119 itemsMặt hàng
- Sort By
-
You can add up to 6 items per a category to the compare list.
JAPAN DRIVEIT
[Type] Press Fit [Materials] Brass [Screw type] Metric (coarse) screw, with notch [Shape] Standard, Screw Diameter (following insertion) M (mm), 3 4 6, Length (following insertion)[L](D = screw diameter M) 1.5D 2D
From: 26,733 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more 
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
From: 1,193,271 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
From: 1,336,930 VND Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
Stainless Steel/Insert Nut Threaded Type / IRU
HIROSUGI-KEIKI
[Nominal of Thread (M)] 2/2.5/2.6/3/4/5/6/8[Material] Free-Cutting Stainless Steel (SUS303)[Processing] Degreasing
From: 15,838 VND Days to Ship: Số ngày giao hàng: 11 Day(s) or more
11 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Stainless Steel/Aluminum Insert Nut Threaded Type (Loosening Prevention) / IRU-W
HIROSUGI-KEIKI
[Nominal of Thread (M)] 2.6/3/4/5/6/8[Material] Free-Cutting Stainless Steel (SUS303)[Processing] Degreasing
From: 21,018 VND Days to Ship: Số ngày giao hàng: 11 Day(s) or more
11 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Aluminum Insert Nut (Screw-In Type) IRL-B/IRL-K
HIROSUGI-KEIKI
[Nominal designation of thread (M)] 2/2.5/2.6/3/4/5/6/8[Material] Lead-free free-cutting aluminum (KS26), lead content 300 ppm or less[Treatment] Black anodized (BAL)/Kanigen plating
From: 12,253 VND Days to Ship: Số ngày giao hàng: 11 Day(s) or more
11 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
HIROSUGI-KEIKI
[Nominal of Thread (M)] 2.6/3/4/5/6/8[Material] Brass (C3604BD), Cadmium Content Less than 75 ppm[Processing] Degreasing
From: 7,458 VND Days to Ship: Số ngày giao hàng: 11 Day(s) or more
11 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Lock Sprue【1-100 Pieces Per Package】
NIPPON SPREW
This SPREW has enhanced locking characteristics. The central portion of the SPREW coil is formed from several windings of angular grips. The spring action of the grips keeps male screws firmly tightened, and prevents looseness caused by strong impacts or shocks.
From: 16,878 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
C-Lock (HCL Type)【10-100 Pieces Per Package】
BOHSEI
Flange shape enables screws to be tightened without damaging plastics. Also prevents plastic burrs from forming when inserts are pressed in.
From: 167,496 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
RECOIL
Recoil, threaded insert, recoil-free special size. [Thread Type]Coarse. "Material" SUS304
From: 32,921 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
RECOIL
Recoil lock type insert designed to stop bolts from loosening during severe vibration or temperature changes.
From: 25,748 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Tangless insert metric coarselocking
ACCURATE
A tangless insert with a function that prevents loosening. The center of this material is hexagonal shaped to prevent loosening.
From: 13,613 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Tangless insert metric coarsephosphor bronze
ACCURATE
We recommend using this on anti-magnetic works or locations.
From: 12,840 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Sprue Insertion Tool INP M Thread
SUNCO
[Nominal M] 2.2, 2.5, 2.6, 3, 4, 5, 6, 8, 12, 14, 16, 18, 20, 22
From: 1,498,261 VND Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
SUNCO
[Nominal M] 6, 8, 10, 12, 14, 16, 18, 20, 22, 24, 30, 36[Nominal W] 1/4, 5/16, 3/8, 1/2, 9/16, 5/8, 3/4, 7/8, 1-8
From: 755,220 VND Days to Ship: Số ngày giao hàng: 7 Day(s) or more
7 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Brass Mini Bit Inserts / HMIB-Z
HIROSUGI-KEIKI
[Nominal of Thread (M)] 1.4/1.6/1.7[Usage Method] Press-fitting / Heated Press-fitting[Compatible Resin] Thermoplastic[Material] Brass (C3604BD), Cadmium Content Less than 75 ppm[Processing] Degreasing
From: 7,068 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Thread Insert (Box)【100 Pieces Per Package】
MISUMI
For in-house inventory or for a large number of uses, purchasing by the carton is advantageous.
From: 1,672,769 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
TSUGAMI
A tap that includes a spiral blade groove (approx. 35°) for efficiently performing tapping and creating blind holes.
From: 504,419 VND Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
TSUGAMI
This is a tap that was especially designed for E-sert (helisert) bottom holes.
From: 723,760 VND Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
Ultrasert UD2 / UD4 (Brass Cadmium-Free)【1-5,000 Pieces Per Package】
TOKAI METAL INDUSTRY
These inserts are the best choice for easy and secure fitment into plastic holes.
From: 4,726 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
From: 936,289 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Steel Ensat Small Outer Diameter Expanded Slot Type, Model 303
KKV
Ensat is an insert nut with high workability usable with resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Female screw reinforcement by Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat supports the force applied to the inner screw with a slightly larger outer screw, so it can endure a stronger force than a direct tap.
From: 21,526 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Steel Ensat Small Outer Diameter, 3 Hole Short Type, Model 347
KKV
Ensat is an insert nut with high workability usable with resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Female screw reinforcement by Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat supports the force applied to the inner screw with a slightly larger outer screw, so it can endure a stronger force than a direct tap.
From: 31,885 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
TEC Sonic (TEC Type)【1-500 Pieces Per Package】
JAPAN DRIVEIT
[Type] Press Fit [Materials] Brass [Screw type] Metric (coarse) screw, without notch [Shape] Standard, Screw Diameter (following insertion) M (mm), 2, 2.5, 3, 4, 5, 6, 8, Length (following insertion)[L](D = screw diameter M) 1.5D 2D 2.5D [Length] B (mm) 3.9 5.7 8.2 9.5 12.7
From: 8,211 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Heat-Lok (HL Type)【1-1,000 Pieces Per Package】
JAPAN DRIVEIT
· Type: Press fit use· Application: Resin, general · Material: Brass · Thread ridge type: Metric coarse screw, without notch · Shape: Standard · Diameter (following insertion): M3, M3.5, M4, M5, M6· Length following insertion (D = screw diameter M): 1.5D, 2D · Length (mm): 4.0, 5.8, 7.2, 8.2, 9.5, 12.7
From: 8,253 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Stainless Steel Tangless Insert
SUNCO
[Nominal M] 2, 2.5, 2.6, 3, 4, 5, 6, , 8, 10, 12, 16, 20[Material] Stainless Steel[Surface Processing] Bare
- Volume Discount
From: 50,272 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
SUNCO
[Nominal M]2, 2.5, 3, 4, 5, 6, 8, 10, 12. [Thread Type]metric (coarse) thread
From: 4,999,200 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
E-Sert Insertion Tool INP Type 3
SUNCO
[Nominal M] 2, 2.2, 3, 4, 5, 6, 8, 10, 12[Nominal W] #2-56, #4-40, #6-32, #8-32, #10-24, 1/4, 5/16, 3/8, 7/16, 1/2
From: 1,428,271 VND Days to Ship: Số ngày giao hàng: Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Sprue 2 pcs. Set Tap for M Thread
SUNCO
[Nominal M] 2, 2.2, 2.5, 2.6, 3, 4, 5, 6, 8, 10, 12, 14, 16, 18, 20, 22, 24, 30, 36
From: 683,136 VND Days to Ship: Số ngày giao hàng: 7 Day(s) or more
7 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
SUNCO
It is used to extract the sprue from the base material female thread of the tap slot.
From: 489,990 VND Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
Lock E-Sert【1-100 Pieces Per Package】
SUNCO
[Material] Stainless Steel[Thread Size M] 2.5 2.6 3 4 5 6 8 10 12 14 16 18 20 22 24 27 30 33 36
From: 96,006 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Brass Insert Nut (Screw-In Type) IRB-W/-CW
HIROSUGI-KEIKI
[Nominal designation of thread (M)] 2.6/3/4/5/6/8[Material] Free-cutting brass (C3604BD), cadmium content less than 75 ppm[Treatment] Nickel plating (Ni)/degreasing
From: 25,798 VND Days to Ship: Số ngày giao hàng: 11 Day(s) or more
11 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Brass Insert Nut (Screw-In Type / Slotted) IRB-SW/-SCW
HIROSUGI-KEIKI
[Nominal designation of thread (M)] 2.6/3/4/5/6/8[Material] Free-cutting brass (C3604BD), cadmium content less than 75 ppm[Treatment] Nickel plating (Ni)/degreasing
From: 19,181 VND Days to Ship: Số ngày giao hàng: 11 Day(s) or more
11 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Self Floating Fastener【1-1,000 Pieces Per Package】
SEL JAPAN
Able to obtain high retention force. Reduces work hours and costs drastically, and eliminates pitching shift during assembly.
From: 30,458 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Sel Locking Fastener SLN (Non-Lock)【1-1,000 Pieces Per Package】
SEL JAPAN
Optimal nut for preventing looseness of vibrating parts, etc. For mounting, press in and tighten with a normal screwdriver. No special tools required.
From: 30,695 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Sel Locking Fastener SL (Lock)【1,000 Pieces Per Package】
SEL JAPAN
The optimal nut for preventing vibrating parts working loose, etc. To fix in place, simply press in and tighten with a normal screwdriver. No special tools required.
From: 38,243,880 VND Days to Ship: Số ngày giao hàng: 7 Day(s) or more
7 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Ultrasert 4 FUIV, Flange Type (Brass, Cadmium-Free)【1-1,000 Pieces Per Package】
TOKAI METAL INDUSTRY
Offers the strongest tension and other strengths over other inserts.
From: 6,353 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
TOKAI METAL INDUSTRY
General purpose type. Low cost and well balanced.
From: 4,498 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
C TEC (CT Type)【100 Pieces Per Package】
BOHSEI
Verification work on the embedded direction is not necessary because both ends have the same shape, which allows for faster work. Recommended when considering the use of parts feeders for automation.
From: 422,182 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Recoil Packet (Milli)【5-10 Pieces Per Package】
RECOIL
[Type] Threaded Insert Use[Application] Light Metal [Materials] SUS304 with Notch[Application] Light Metal [Screw type] Coarse/Fine Screw Diameter (after insertion) 2 2.2 2.5 3 3.5 4 5 6 7 8 9 10 11 12 14 16 18 20 Length (after insertion)[L](D = screw diameter M) 1D 1.5D 2D [Sales unit] Minimum Quantity (Available for Purchase from 1 pc) Box and Pkg. [Pitch (mm)] 0.4 0.45 0.5 0.6 0.7 0.8 1.0 1.25 1.5 1.75 2.0 2.5 Usage Environment: Internal Combustion Engines/Manufacturing Equipment Quantity 5 10
From: 117,600 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
RECOIL
The color of the main body will become silver when the method of heat treatment changes.Not plated. (Inconel Black Recoil)An insert (Helisert/Sprue) for use at high temperatures (425–550°C) and with non-magnetic applications.[Features]· Nickel alloy.· For use at high temperatures (425–550°C [800–1,000°F]) and with non-magnetic applications.
From: 413,803 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Recoil Packet (METRIC)【10 Pieces Per Package】
RECOIL
[Features]· The recoil is created by coiling a high quality stainless steel wire with rhomboid cross section into a spring-like shape.· The insert is slightly larger than the tap hole of the other base metal, and can be attached by lightly narrowing down.· Once equipped, its spring effect makes it almost permanently non-extractable.
From: 603,060 VND Days to Ship: Số ngày giao hàng: 7 Day(s) or more
7 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Brass Ensat Thread Plastic Deformation Type, Model 305
KKV
Ensat is an insert nut with high workability usable for resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Reinforcing female screws using Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat is an insert nut with high workability usable for resin, aluminum, etc., which easily causes female screws to be destroyed when directly tapped.
From: 17,143 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Steel Ensat With Pin Short Type, Model 317
KKV
Ensat is an insert nut with high workability usable with resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Female screw reinforcement by Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat supports the force applied to the inner screw with a slightly larger outer screw, so it can endure a stronger force than a direct tap.
From: 116,116 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Steel Ensat Small Outer Diameter, 3 Hole Long Type, Model 348
KKV
Ensat is an insert nut with high workability usable with resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Female screw reinforcement by Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat supports the force applied to the inner screw with a slightly larger outer screw, so it can endure a stronger force than a direct tap.
From: 31,885 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
| BrandNhãn hiệu |
|---|
| Product SeriesDòng sản phẩm |
| CADCAD |
| From |
| Days to ShipSố ngày giao hàng |
| Screw Dia. M (after insertion)(mm) |
| Type |
| Material |
| Screw Type |
| Length L (after insertion) (D = Thread Dia. M) |
| Application |
| Notch |
| Thread Dia. (After inserted), Unified(inch) |
| Shape |
| Sales Unit |
You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | |
| BrandNhãn hiệu | JAPAN DRIVEIT | KOFAS | SUNCO | HIROSUGI-KEIKI | HIROSUGI-KEIKI | HIROSUGI-KEIKI | HIROSUGI-KEIKI | NIPPON SPREW | BOHSEI | RECOIL | RECOIL | ACCURATE | ACCURATE | SUNCO | SUNCO | HIROSUGI-KEIKI | MISUMI | TSUGAMI | TSUGAMI | TOKAI METAL INDUSTRY | RECOIL | KKV | KKV | JAPAN DRIVEIT | JAPAN DRIVEIT | SUNCO | SUNCO | SUNCO | SUNCO | SUNCO | SUNCO | HIROSUGI-KEIKI | HIROSUGI-KEIKI | SEL JAPAN | SEL JAPAN | SEL JAPAN | TOKAI METAL INDUSTRY | TOKAI METAL INDUSTRY | BOHSEI | RECOIL | RECOIL | RECOIL | KKV | KKV | KKV |
| Product SeriesDòng sản phẩm | SUS 18/8 (SUS 304) HENLI COLE INSERT (KN-160)【100 Pieces Per Package】 | Stainless Steel/Aluminum Insert Nut Threaded Type (Loosening Prevention) / IRU-W | Ultrasert UD2 / UD4 (Brass Cadmium-Free)【1-5,000 Pieces Per Package】 | Steel Ensat Small Outer Diameter Expanded Slot Type, Model 303 | Steel Ensat Small Outer Diameter, 3 Hole Short Type, Model 347 | Sel Locking Fastener SLN (Non-Lock)【1-1,000 Pieces Per Package】 | Ultrasert 4 FUIV, Flange Type (Brass, Cadmium-Free)【1-1,000 Pieces Per Package】 | Steel Ensat Small Outer Diameter, 3 Hole Long Type, Model 348 | |||||||||||||||||||||||||||||||||||||
| CADCAD |
| ||||||||||||||||||||||||||||||||||||||||||||
| From | 26,733 VND | 1,193,271 VND | 1,336,930 VND | 15,838 VND | 21,018 VND | 12,253 VND | 7,458 VND | 16,878 VND | 167,496 VND | 32,921 VND | 25,748 VND | 13,613 VND | 12,840 VND | 1,498,261 VND | 755,220 VND | 7,068 VND | 1,672,769 VND | 504,419 VND | 723,760 VND | 4,726 VND | 936,289 VND | 21,526 VND | 31,885 VND | 8,211 VND | 8,253 VND | 50,272 VND | 4,999,200 VND | 1,428,271 VND | 683,136 VND | 489,990 VND | 96,006 VND | 25,798 VND | 19,181 VND | 30,458 VND | 30,695 VND | 38,243,880 VND | 6,353 VND | 4,498 VND | 422,182 VND | 117,600 VND | 413,803 VND | 603,060 VND | 17,143 VND | 116,116 VND | 31,885 VND |
| Days to ShipSố ngày giao hàng | 6 Day(s) or more | 4 Day(s) or more | Same day or more | 11 Day(s) or more | 11 Day(s) or more | 11 Day(s) or more | 11 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | Same day or more | 7 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | Same day or more | Same day or more | 6 Day(s) or more | 4 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | Same day | 7 Day(s) or more | Same day or more | 6 Day(s) or more | 11 Day(s) or more | 11 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 7 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 7 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more |
| Screw Dia. M (after insertion)(mm) | 3 ～ 6 | 2 ～ 20 | 2.5 ～ 10 | 2 ～ 8 | 2.6 ～ 8 | 2 ～ 8 | 2.6 ～ 8 | 4 ～ 10 | 3 ～ 6 | 3 ～ 8 | 3 ～ 20 | 2.5 ～ 12 | 3 ～ 6 | 2.2 ～ 20 | 6 ～ 30 | 1.4 ～ 1.7 | 2.5 ～ 8 | 3 ～ 8 | 3 ～ 12 | 2 ～ 10 | 2 ～ 30 | 3 ～ 10 | 4 ～ 16 | 2 ～ 8 | 3 ～ 6 | 2 ～ 20 | 2 ～ 12 | 2 | 2 ～ 36 | 2 ～ 5 | 2.5 ～ 30 | 2.6 ～ 8 | 2.6 ～ 8 | 3 ～ 4 | 3 ～ 4 | 4 | 3 ～ 8 | 1.4 ～ 6 | 3 | 2 ～ 20 | 3 ～ 12 | 2 | 3 ～ 6 | 4 ～ 14 | 4 ～ 12 |
| Type | Press Fit | Standard | Tool | Self-Tapping | Self-Tapping | Self-Tapping | Press Fit | Standard | Press Fit | Standard | Standard | Tangless | Tangless | Tool | Tool | Press Fit | Tangless | Tool | Tool | Standard | Tool | Self-Tapping | Self-Tapping | Press Fit | Press Fit | Tangless | Tool | Tool | Tool | Tool | Standard | Self-Tapping | Self-Tapping | Swaged | Swaged | Swaged | Standard | Standard | Press Fit | Standard | Standard | Standard | Self-Tapping | Self-Tapping | Self-Tapping |
| Material | Brass | Stainless Steel (SUS303/304) | - | Stainless Steel (SUS303/304) | Stainless Steel (SUS303/304) | Aluminum | Brass | Stainless Steel (SUS303/304) | Brass | Stainless Steel (SUS303/304) | Stainless Steel (SUS303/304) | Stainless Steel (SUS303/304) | Phosphor Bronze | - | - | Brass | Stainless Steel (SUS303/304) | Steel | Steel | Brass | - | Steel | Steel | Brass | Brass | Stainless Steel (SUS303/304) | - | - | - | - | Stainless Steel (SUS303/304) | Brass | Brass | Steel / Stainless Steel (SUS303/304) | Stainless Steel (SUS303/304) | Stainless Steel (SUS303/304) | Brass | Brass | Brass | Stainless Steel (SUS303/304) | Inconel X-750 | Stainless Steel (SUS303/304) | Brass | Steel | Steel |
| Screw Type | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread |
| Length L (after insertion) (D = Thread Dia. M) | 1.5D / 2D | - | - | 1D / 1.5D / 2D / 2.5D / 3D / 0.7D / 0.8D / 3.5D | 1D / 1.5D / 2D / 2.5D / 3D / 0.8D / 3.5D | 1D / 1.5D / 2D / 2.5D / 3D / 0.7D / 0.8D / 3.5D | 1.5D / 2D / 2.5D | 1D / 1.5D / 2D / 3D | - | 0.5D / 0.8D | 1D / 1.5D / 2D | 1D / 1.5D / 2D | 1D / 1.5D / 2D | - | - | 1.5D / 2D | 1D / 1.5D / 2D | - | - | 1D / 1.5D / 2D | - | - | - | 1.5D / 2D | 1.5D / 2D | 1D / 1.5D / 2D | - | - | - | - | 1D / 1.5D / 2D | 1D / 1.5D / 2D / 2.5D / 3D / 0.8D / 3.5D | 1D / 1.5D / 2D / 2.5D / 3D / 0.8D / 3.5D | - | - | - | 1.5D / 2D | 1D / 1.5D / 2D / 2.5D / 3D / 0.7D | - | 1D / 1.5D / 2D | 1D / 1.5D / 2D | 1D | - | - | - |
| Application | - | - | - | Cast Iron | Cast Iron | Light Metal | Light Metal | Light Metal | Resin General | Light Metal | Light Metal | Light Metal / Cast Iron / Resin General | Light Metal / Cast Iron / Resin General | - | - | Light Metal | Light Metal | - | - | Resin General | - | - | - | - | Resin General | - | - | - | - | - | - | Light Metal | Light Metal | Light Metal | Light Metal | Light Metal | Resin General | Resin General | Resin General | Light Metal | Light Metal / Cast Iron | - | - | - | - |
| Notch | Not Provided | - | - | Not Provided | Not Provided | Not Provided | Not Provided | Provided | - | Provided | Provided | - | - | - | - | Not Provided | Not Provided | - | - | Not Provided | - | - | - | Not Provided | Not Provided | Provided | - | - | - | - | Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | - | Provided | Provided | - | - | - | - |
| Thread Dia. (After inserted), Unified(inch) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Shape | Standard | Standard | - | Standard | Standard | Standard | Standard | - | Standard | - | - | - | - | - | - | Standard | - | - | - | Standard | - | Small O.D. Slotted Type | Small O.D. 3-Hole Type | Standard | Standard | Standard | - | - | - | - | - | Standard | Slotted | - | - | - | Standard | Standard | Standard | - | - | - | Standard | With Pin Type | Small O.D. 3-Hole Type |
| Sales Unit | - | - | Low Quantity (Available beginning with 1 pc.) | Box, Pkg. | Box, Pkg. | Box, Pkg. | Box, Pkg. | Low Quantity (Available beginning with 1 pc.) / Box, Pkg. | - | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | - | - | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Box, Pkg. | Box, Pkg. | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) / Box, Pkg. | - | Low Quantity (Available beginning with 1 pc.) | - | - | - | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) / Box, Pkg. | Box, Pkg. | Box, Pkg. | Low Quantity (Available beginning with 1 pc.) / Box, Pkg. | Low Quantity (Available beginning with 1 pc.) / Box, Pkg. | - | - | Low Quantity (Available beginning with 1 pc.) / Box, Pkg. | - | Box, Pkg. | Low Quantity (Available beginning with 1 pc.) | Box, Pkg. | Low Quantity (Available beginning with 1 pc.) | - | - |
Loading...Tải…
ConfigureTạo
Specification/DimensionsĐặc điểm kỹ thuật / Kích thướcĐặc điểm kỹ thuật / Kích thước
-
Screw Dia. M (after insertion)(mm)
-
Type
-
Standard
-
Tangless
-
Self-Tapping
-
Key Lock
-
Tool
-
Swaged
-
Press Fit
-
Standard
-
Material
- Steel
- Stainless Steel (SUS303/304)
- Stainless Steel (SUS316)
- Stainless Steel (SUS430F)
- Brass
- Phosphor Bronze
- Inconel X-750
- Nitrox 60
- Aluminum
- Nylon
-
Screw Type
- Metric (Coarse) Thread
- Metric (Fine) Thread
- Unified (Coarse) Thread
- Unified (Fine) Thread
- BSW (Coarse) Thread
-
Length L (after insertion) (D = Thread Dia. M)
-
Application
- Light Metal
- Cast Iron
- Resin General
- Wood
-
Notch
-
Thread Dia. (After inserted), Unified(inch)
-
Shape
-
Sales Unit
- Low Quantity (Available beginning with 1 pc.)
- Box, Pkg.
Related Categories to InsertDanh mục liên quan đến Insert
MISUMI Contact
TALK ID : Misumi_vn
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy