(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.
Tel: 0222-361-1555
Email: cs@misumi.com.vn
8:00 - 17:00 (Mon - Sat)
Search by Category / Brand Tìm theo danh mục, nhãn hiệu
Search by Category Tìm theo danh mục
Keyless Bushing (Fastening Fittings)
[What is a keyless bushing (fastening fitting)?]
A keyless bushing is a fastener that can fix shafts and hubs (gear, sprocket, pulley, etc.) without key grooving. By tightening the bolt, drag and friction force are generated in the tapered fitting part, causing it to fasten by the resultant force.
Brand |
|
|---|---|
| CAD |
|
| Days to Ship |
|
60 itemsMặt hàng
- Sort By
-
Recommended
You can add up to 6 items per a category to the compare list.
MiSUMi EconomyKeyless Bushings(Mechanical Lock), Straight With Centering Function
MiSUMi EconomyMISUMI
- Volume Discount
From: 146,814 VND Days to Ship: Số ngày giao hàng: Same day or more 
Same day or more
-
Recommended
You can add up to 6 items per a category to the compare list.
MiSUMi Economy
From: 316,447 VND Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
MechaLock - Standard (Centering Function)
MISUMI
It comes in a wide variety of sizes, materials, and surface treatments, and has a centering function.
- Volume Discount
From: 619,900 VND Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
Economy series
You can add up to 6 items per a category to the compare list.
MiSUMi EconomyFrom: 111,680 VND Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
TSUBAKIMOTO CHA
A keyless bushing (fastening joint) that connects the shaft and boss without using a key.[Features]·Strong fastening is possible just by tightening the tightening bolt.·A general-purpose type that is easy to install and remove.·Key processing, spline processing, press fitting, shrink fitting, etc. are not required at all.·A wide variety of sizes are available, and it is also compatible with large diameter shafts.·Selectable depending on the application.·Stainless steel, electroless nickel plating, and inch sizes are also available.[Applications]·Ideal for timing pulleys, cams, etc. where fine angle adjustment is required.·Convenient for places where it is necessary to put on and take off.·Ideal for industrial printers, machine tools, etc.
- CAD ：
- 2D
From: 953,092 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
Economy series
You can add up to 6 items per a category to the compare list.
MiSUMi EconomyFrom: 139,443 VND Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
MechaLock - Straight for High Torque
MISUMI
The axial length has been extended compared to the straight type, allowing it to handle higher loads.
- Volume Discount
From: 2,360,686 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
SANKI
Clamp element for shaft and boss connections that require substantial transmission torque.
- CAD ：
- 2D
From: 1,718,473 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
From: 708,143 VND Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
ISEL
[Features]· 34 models that have shaft diameters standardized from ø5 to ø85.· Centering function suppresses outer circumference and terminal surface run-out.· Loose design of slope angle degrees produces a self-locking effect.· Hub internal diameter can be used with pass-through machining.· Wide range of hub options with thin walls and low surface pressure
From: 736,382 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
Economy series
You can add up to 6 items per a category to the compare list.
MiSUMi EconomyFrom: 116,306 VND Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
TSUBAKIMOTO CHA
A friction type fastener that fastens the shaft and boss without using a key or the like.[Features]·This series has the same inner and outer diameters as the general-purpose AS series and has a centering function.·Since no centering guide is required, the boss hole can be straight, eliminating the need for troublesome centering guide processing.·It has a simple structure consisting of three parts: an inner ring, an outer ring, and a tightening bolt.[Applications]·Machine tool build-in servo motor shafts, tool change arms, etc.
- CAD ：
- 2D
From: 958,493 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Keyless bushing A.P.LOCK SAPL-A Series
SUNGIL
[Features]·Self-centering function: Prevents fine off-centering·Small diameter difference between inner diameter (d) and outer diameter (D), low surface pressure allows installation on small hubs·Inner diameter standardized from ⌀5 to ⌀50·Simple in concept and easy to assemble·Stainless steel material (vacuum environment) or electroless nickel plating (corrosion prevention) product can be selected depending on the usage environment.
From: 518,395 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Power lock keyless bushing A.P.LOCK SAPL-D1 series
SUNGIL
[Features] · Most General Shaft-hub Combining Structure · Recommended Shaft Outer Diameter Tolerance: h8 · Recommended Hub Inner Diameter Tolerance: H8
From: 517,214 VND Days to Ship: Số ngày giao hàng: 8 Day(s)
8 Day(s)
-
You can add up to 6 items per a category to the compare list.
MISUMI
The maximum permissible torque is higher than the standard type, and it securely locks the shaft and hub.
- Volume Discount
From: 784,045 VND Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
MIKI PULLEY
Shaft and mounting parts have a large allowable dimensions clearance, and can be easily aligned and positioned. Medium load and lightweight types.[Features]· Tighten the clamping bolt to move the outer ring in the shaft direction.· At this time, the wedging action between the inner ring and the taper surface produces force that pushes against the shaft and hub internal surface. This force completely connects the axis and shaft.· The PSL-D is designed for use with medium loads, the surface pressure is small, and it can lead to a reduction of the diameter and weight of the installation.· Short in shaft direction, taking up no more space than is necessary.· PSL-D-CThe simple rust proofing specification is a simple rust proofing specification that involves applying electroless nickel plating to the main body
From: 1,677,034 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
KANA lock (cost performance product) KPL200 shape
KATAYAMA CHAIN
KPL200 is a dedicated KanaLock for shafts and bosses that require substantial transmission torque. Easy mounting. Applicable shaft diameter 19 mm to 70 mm.
From: 445,569 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
SANKI
Mounting space has been extremely reduced in a radial direction. Great torque transmission can also be produced by using up to 4 units in arrangement.
- CAD ：
- 2D
From: 269,175 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Taper Shaft Hub (Powerlock) · Including Locking Nut
HARA DOKI
[Product Information] Self-centering and non-floating products with hexagonal nut, locking nut and corrosion resistance. The rotation accuracy is 0.03 mm. All shaft - joint hugs in machine elements such as sprocket wheels, hear wheels, belt pulleys, cams, levers can be easily and efficiently set by using taper shaft hubs. •Related Keywords: HALDER, Mecha lock (fastening joint)
- CAD ：
- 3D
From: 525,797 VND Days to Ship: Số ngày giao hàng: 14 Day(s)
14 Day(s)
-
You can add up to 6 items per a category to the compare list.
Powerlock Keyless Bushing A.P.LOCK SAPL-T Series
SUNGIL
[Features] · Self-centering Capability · Recommended Shaft Outer Diameter Tolerance: h8 · Recommended Hub Inner Diameter Tolerance: H8
From: 453,594 VND Days to Ship: Số ngày giao hàng: 8 Day(s)
8 Day(s)
-
You can add up to 6 items per a category to the compare list.
Mechalock MC Series Aluminum Type
ISEL
· 22 models from φ4 to φ35 shaft diameter available as standard· Supports aluminum timing pulleys (steel is also usable)· Reduced number of bolts shortens attachment/detachment time· With a spigot joint on the back, it can also be used as a bearing retainer· With low surface pressure, it is also ideal for hollow shafts
From: 847,520 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
TSUBAKIMOTO CHA
A keyless bushing that connects the shaft and boss without using a key.[Features]·Since it is compatible with a wide range of tolerance shafts (other than KP specifications), it is possible to use standard products for plus tolerance shafts such as servo motors.·It has a centering function.·With a product lineup starting from small diameter shafts, it is ideal for fastening the output shafts of small stepping motors and servo motors.·Stainless steel specifications (SS) and electroless nickel plating specifications (KP) do not require the application of oil or grease during assembly.·Compared to the AE series, the inner/outer diameter ratio is smaller, allowing for a more compact design.·Low surface pressure specifications that can be used for small diameter bosses are also available.[Applications]·Ideal for timing pulleys, cams, etc. where fine angle adjustment is required.·It is convenient for places where detachment is required, such as when mounting directly on the motor shaft.
- CAD ：
- 2D
From: 754,325 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Keyless bushing A.P.LOCK SAPL-B Series
SUNGIL
[Features] · Self-centering Capability: Minimal Off-centering Prevention. ·The outer diameter of the cover is larger than that of the SAPL-A type, and the bolt size is larger, which makes it relatively durable compared to the same inner diameter.
- CAD ：
- 2D
From: 680,316 VND Days to Ship: Số ngày giao hàng: 9 Day(s) or more
9 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Keyless bushing A.P.LOCK SAPC Series
SUNGIL
[Features] ·Aluminum material At High-Speed Servo Control Positioning, The Moment of Inertia Reduction is an important factor in system performance. The Use of Aluminum A.P.Lock suitable for aluminum pulley enables high-speed use with low inertia. ·Ideal for aluminum pulleys When driving a servo motor with a timing pulley, there is a slip problem because the conventional friction coupling unit has a high surface pressure and does not fit the hub diameter. However, the SAPC series reduces the number of bolts based on the torque specification of the servo motor, to reduce surface pressure, so that tightening with aluminum pulley is done without any difficulty. ·Finishing structure Since it is designed to allow the bearing push plate to work, it is not necessary to use a separate bearing push plate. ·Easy positioning of assembly Conventional power locks require a gap of 1 mm from the counterparts in consideration of disassembly, but the SAPC series has a structure that is easy to disassemble even when there is no hub movement space when disassembled. It is also easy to locate.
From: 578,654 VND Days to Ship: Số ngày giao hàng: 8 Day(s)
8 Day(s)
-
You can add up to 6 items per a category to the compare list.
Mechanical Lock, High Torque Transmission Type
MISUMI
By increasing the bolt size, it has excellent durability and is ideal for mechanisms that require high transmission power.
From: 1,790,893 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
From: 311,098 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
MechaLock - Easy Mounting (Nut)
MISUMI
[Features]It can be easily installed by simply tightening 1 nut.
- Volume Discount
From: 907,699 VND Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
From: 833,977 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Mechanical lock MB standard high-torque type
ISEL
Centering function suppresses outer circumference and terminal surface run-out. High torque specifications.[Features]· 21 models that have shaft diameters standardized from ø25 to ø150.· High torque transmission specifications.· With centering function.· Loose design of slope angle degrees produces a self-locking effect.· Hub internal diameter can be used with pass-through machining, wide range of options available during design
From: 2,175,718 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
From: 674,568 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
From: 842,752 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
KanaLock (Cost-Effective Product) Model KPL300
KATAYAMA CHAIN
[Features]・ The KPL300 type requires very little mounting space in the radial direction, and the number of built-in KanaLocks can be selected up to 4. It is also possible to transmit a large torque.・ The mating of the boss hole and the shaft is up to H8/h8
From: 116,560 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Power lock keyless bushing A.P.LOCK SAPL-D2 series
SUNGIL
[Features] · Self-centering Capability · Recommended Shaft Outer Diameter Tolerance: h8 · Recommended Hub Inner Diameter Tolerance: H8
From: 552,774 VND Days to Ship: Số ngày giao hàng: 8 Day(s)
8 Day(s)
-
You can add up to 6 items per a category to the compare list.
Power lock keyless bushing A.P.LOCK SAPL-D4 series
SUNGIL
[Features] · Self-centering Capability · Recommended Shaft Outer Diameter Tolerance: h8 · Recommended Hub Inner Diameter Tolerance: H8
From: 1,319,848 VND Days to Ship: Số ngày giao hàng: 8 Day(s)
8 Day(s)
-
You can add up to 6 items per a category to the compare list.
From: 847,114 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
TSUBAKIMOTO CHA
A keyless bushing that connects the shaft and boss without using a key.[Features]·A simple fastening type that can be easily fastened with a single nut.·It can also be attached to a boss that is shorter than the overall length of the power lock.·A special lubricating coating eliminates the need to apply oil or grease during assembly.·It has a centering function, eliminating the need for troublesome machining of the guide part of the boss.[Applications]·Ideal for timing pulleys, cams, etc. where fine angle adjustment is required.·Convenient for places where removal is required.
- CAD ：
- 2D
From: 1,733,356 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
From: 818,017 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Keyless Bushing A.P.LOCK SAPL-C Series
SUNGIL
[Features] · Self-centering Capability: Minimal Off-centering Prevention. ・The difference in diameter between the inner diameter (d) and the outer diameter (D) is small, so that it can be mounted on a small hub with low surface pressure. (A.P. Lock of the most compact design) ·Suitable for Short Hubs. ·Since the inner ring is in close contact with the hub section, the hub does not move during tightening. ·Stainless Steel or Electroless Nickel plated products can be selected depending on the environment.
- CAD ：
- 2D
From: 725,330 VND Days to Ship: Số ngày giao hàng: 9 Day(s) or more
9 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Powerlock Keyless Bushing A.P.LOCK SAPL-R Series
SUNGIL
[Features] · Relatively Low Fastening Torque · Recommended shaft outer diameter tolerance: h6 if smaller than inner diameter (d) 40 mm, h8 if larger than 42 mm · Recommended hub diameter tolerance: H7 if smaller than inner diameter (d) 40 mm, H8 if larger than 42 mm
From: 276,938 VND Days to Ship: Số ngày giao hàng: 8 Day(s)
8 Day(s)
-
You can add up to 6 items per a category to the compare list.
MISUMI
Because the bolt is attached directly to the hub, the difference between the inside and outside diameters is small and the walls are thin. Can be attached to small hubs.
- Volume Discount
From: 635,159 VND Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
Mechanical Lock MSA Rust-proof Standard Stainless Steel Specifications
ISEL
Centering function suppresses outer circumference and terminal surface run-out. Stainless steel specifications.
From: 1,871,950 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
From: 773,726 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
MIKI PULLEY
Shaft and mounting parts have a large allowable dimensions clearance, and can be easily aligned and positioned.
From: 980,450 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
From: 808,791 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Keyless Bushing A.P.LOCK SAPL-AK Series
SUNGIL
[Features]·Self-centering function: Prevents minute off-centering.·The diameter difference between the inner diameter (d) and the outer diameter (D) is small, and the low surface pressure makes it possible to install even small hubs.·Standardized inner diameter ⌀4.5 to ⌀40.·Simple in concept and easy to assemble.·Stainless steel (vacuum environment) or electroless nickel plating (corrosion prevention) products can be selected depending on the operating environment.
From: 631,941 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
| BrandNhãn hiệu |
|---|
| Product SeriesDòng sản phẩm |
| CADCAD |
| From |
| Days to ShipSố ngày giao hàng |
| SpecificationsĐặc điểm kĩ thuật |
| Type |
| Shaft Bore Dia. d(Ø) |
| Hub Dia.(Ø) |
| Body Material |
| Allowable Torque Range(N•m) |
| Centering |
| Surface Treatment |
| Tightening Structure |
| Tightening Method |
| Allowable Torque(N•m) |
You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.      | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | |
| BrandNhãn hiệu | MISUMI | MISUMI | MISUMI | MISUMI | TSUBAKIMOTO CHA | MISUMI | MISUMI | SANKI | MISUMI | ISEL | MISUMI | TSUBAKIMOTO CHA | SUNGIL | SUNGIL | MISUMI | MIKI PULLEY | KATAYAMA CHAIN | SANKI | HARA DOKI | SUNGIL | ISEL | TSUBAKIMOTO CHA | SUNGIL | SUNGIL | MISUMI | YHB CO.LTD. | MISUMI | YHB CO.LTD. | ISEL | ISEL | YHB CO.LTD. | KATAYAMA CHAIN | SUNGIL | SUNGIL | ISEL | TSUBAKIMOTO CHA | YHB CO.LTD. | SUNGIL | SUNGIL | MISUMI | ISEL | ISEL | MIKI PULLEY | YHB CO.LTD. | SUNGIL |
| Product SeriesDòng sản phẩm | Keyless Bushings(Mechanical Lock), Straight With Centering Function | Mechanical Lock MSA Rust-proof Standard Stainless Steel Specifications | |||||||||||||||||||||||||||||||||||||||||||
| CADCAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||||
| From | 146,814 VND | 316,447 VND | 619,900 VND | 111,680 VND | 953,092 VND | 139,443 VND | 2,360,686 VND | 1,718,473 VND | 708,143 VND | 736,382 VND | 116,306 VND | 958,493 VND | 518,395 VND | 517,214 VND | 784,045 VND | 1,677,034 VND | 445,569 VND | 269,175 VND | 525,797 VND | 453,594 VND | 847,520 VND | 754,325 VND | 680,316 VND | 578,654 VND | 1,790,893 VND | 311,098 VND | 907,699 VND | 833,977 VND | 2,175,718 VND | 674,568 VND | 842,752 VND | 116,560 VND | 552,774 VND | 1,319,848 VND | 847,114 VND | 1,733,356 VND | 818,017 VND | 725,330 VND | 276,938 VND | 635,159 VND | 1,871,950 VND | 773,726 VND | 980,450 VND | 808,791 VND | 631,941 VND |
| Days to ShipSố ngày giao hàng | Same day or more | Same day or more | Same day or more | Same day or more | 4 Day(s) or more | Same day or more | 4 Day(s) or more | 4 Day(s) or more | Same day or more | 4 Day(s) or more | Same day or more | 4 Day(s) or more | 4 Day(s) or more | 8 Day(s) | Same day or more | 6 Day(s) or more | 6 Day(s) or more | 4 Day(s) or more | 14 Day(s) | 8 Day(s) | 4 Day(s) or more | 4 Day(s) or more | 9 Day(s) or more | 8 Day(s) | 4 Day(s) or more | 4 Day(s) or more | Same day or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 6 Day(s) or more | 8 Day(s) | 8 Day(s) | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 9 Day(s) or more | 8 Day(s) | Same day or more | 4 Day(s) or more | 4 Day(s) or more | 6 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more |
| SpecificationsĐặc điểm kĩ thuật | |||||||||||||||||||||||||||||||||||||||||||||
| Type | Flanged | Straight | Flanged | Thin Wall | Straight | Straight | Straight | Straight | Thin Wall | Flanged | Direct Mounting | Flanged | Flanged | Straight | Straight | Straight | Straight | Sleeve | Nut Tightening | Flanged | Flanged | Flanged | Flanged | Flanged | Flanged | - | Nut Tightening | - | Flanged | Thin Wall | - | Sleeve | Straight | Straight | Nut Tightening | Nut Tightening | - | Thin Wall | Sleeve | Direct Mounting | Flanged | Straight | Flanged | - | Flanged |
| Shaft Bore Dia. d(Ø) | 5 ～ 50 | 30 ～ 50 | 5 ～ 70 | 8 ～ 35 | 19 ～ 200 | 19 ～ 50 | 30 ～ 65 | 19 ～ 100 | 5 ～ 50 | 5 ～ 70 | 14 ～ 40 | 19 ～ 110 | 5 ～ 50 | 18 ～ 200 | 20 ～ 65 | 2 ～ 50 | 19 ～ 70 | 10 ～ 60 | - | 6 ～ 50 | 4 ～ 35 | 10 ～ 19 | 8 ～ 30 | 5 ～ 35 | 28 ～ 60 | - | 8 ～ 35 | - | 35 | 6 ～ 50 | 8 ～ 100 | 10 ～ 80 | 19 ～ 60 | 19 ～ 60 | 8 ～ 35 | 10 ～ 30 | 19 ～ 100 | 5 ～ 30 | 6 ～ 50 | 5 ～ 30 | 8 ～ 50 | 20 ～ 65 | 6 ～ 40 | - | 5 ～ 50 |
| Hub Dia.(Ø) | 16 ～ 72 | 55 ～ 80 | 16 ～ 97 | 15 ～ 47 | 47 ～ 260 | 47 ～ 80 | 55 ～ 95 | 47 ～ 145 | 12 ～ 65 | 16 ～ 97 | 25 ～ 48 | 47 ～ 155 | 16 ～ 72 | 47 ～ 260 | 47 ～ 95 | 16 ～ 80 | 47 ～ 110 | 13 ～ 68 | - | 14 ～ 65 | 15 ～ 56 | 23 ～ 33 | 22 ～ 55 | 16 ～ 56 | 47 ～ 88 | 19 ～ 201 | 14 ～ 48 | 47 ～ 250 | 57 | 12 ～ 65 | 22 ～ 145 | - | 47 ～ 90 | 47 ～ 90 | 14 ～ 48 | 24 ～ 50 | 47 ～ 145 | 12 ～ 41 | 9 ～ 57 | 8 ～ 35 | 21 ～ 72 | 47 ～ 95 | 12 ～ 53 | 18 ～ 125 | 16 ～ 72 |
| Body Material | Steel | Steel | Steel / Stainless Steel | Steel | Steel | Steel | Steel | Steel | Steel / Stainless Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | - | Steel | Aluminum | Steel / Stainless Steel | Steel | Aluminum | Steel | - | Steel | Steel | - | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Stainless Steel | Steel | Steel / Stainless Steel | Steel | Steel |
| Allowable Torque Range(N•m) | 2.0~20.0 ～ 1000.1~3000.0 | 1000.1~3000.0 ～ 3000.1~10000.0 | 2.0~20.0 ～ 3000.1~10000.0 | 20.1~50.0 ～ 700.1~1000.0 | 200.1~300.0 ～ 10000.1~300000.0 | 200.1~300.0 ～ 1000.1~3000.0 | 1000.1~3000.0 ～ 3000.1~10000.0 | 200.1~300.0 ～ 10000.1~300000.0 | 2.0~20.0 ～ 1000.1~3000.0 | 2.0~20.0 ～ 3000.1~10000.0 | 50.1~70.0 ～ 300.1~500.0 | 200.1~300.0 ～ 10000.1~300000.0 | 2.0~20.0 ～ 1000.1~3000.0 | - | 200.1~300.0 ～ 1000.1~3000.0 | 2.0~20.0 ～ 1000.1~3000.0 | 200.1~300.0 ～ 3000.1~10000.0 | 2.0~20.0 ～ 700.1~1000.0 | - | - | 2.0~20.0 ～ 200.1~300.0 | 20.1~50.0 ～ 500.1~700.0 | 2.0~20.0 ～ 500.1~700.0 | 2.0~20.0 ～ 200.1~300.0 | 300.1~500.0 ～ 1000.1~3000.0 | 20.1~50.0 ～ 10000.1~300000.0 | 20.1~50.0 ～ 300.1~500.0 | 200.1~300.0 ～ 10000.1~300000.0 | 700.1~1000.0 | 2.0~20.0 ～ 1000.1~3000.0 | - | 2.0~20.0 ～ 1000.1~3000.0 | - | - | 20.1~50.0 ～ 300.1~500.0 | 20.1~50.0 ～ 300.1~500.0 | - | 2.0~20.0 ～ 500.1~700.0 | - | 2.0~20.0 ～ 100.1~150.0 | 20.1~50.0 ～ 700.1~1000.0 | 200.1~300.0 ～ 1000.1~3000.0 | 2.0~20.0 ～ 700.1~1000.0 | 50.1~70.0 ～ 10000.1~300000.0 | 2.0~20.0 ～ 1000.1~3000.0 |
| Centering | Provided | None | Provided | Provided | None | None | None | None | Provided | Provided | None | Provided | Provided | - | None | - | None | None | Provided | Provided | Provided | Provided | Provided | None | Provided | - | None | - | Provided | Provided | - | None | Provided | Provided | Provided | Provided | - | Provided | - | None | Provided | None | - | - | Provided |
| Surface Treatment | None | None | None / Black Oxide / Electroless Nickel Plating | None | None | - | None | None | None / Electroless Nickel Plating | None | None | None | None | None | None / Electroless Nickel Plating | None / Electroless Nickel Plating | None | None | - | None | Anodize | None | None | Anodize | None | - | None / Black Oxide / Electroless Nickel Plating | - | None | None | - | None | None | None | None | None | - | None | None | None | None | None | None / Electroless Nickel Plating | - | Electroless Nickel Plating |
| Tightening Structure | Single Cone Type | Double Cone Type | Single Cone Type | Single Cone Type | Double Cone Type | Double Cone Type | Double Cone Type | Double Cone Type | Single Cone Type | Single Cone Type | Single Cone Type | Single Cone Type | Single Cone Type | - | Double Cone Type | Single Cone Type | Double Cone Type | Tapered Sleeve Type | - | - | Single Cone Type | Single Cone Type | Single Cone Type | Single Cone Type | Single Cone Type | - | Tapered Sleeve Type | - | Single Cone Type | Tapered Sleeve Type | - | Tapered Sleeve Type | - | - | Tapered Sleeve Type | Tapered Sleeve Type | - | Single Cone Type | - | Single Cone Type | Single Cone Type | Double Cone Type | Single Cone Type | - | Single Cone Type |
| Tightening Method | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | - | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | - | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) |
| Allowable Torque(N•m) | 10 ～ 1768 | 1193 ～ 3820 | 2.8 ～ 3400 | 29 ～ 790 | 294 ～ 60600 | 280 ～ 1870 | 1110 ～ 6400 | 270 ～ 10500 | 3 ～ 2120 | 7 ～ 3400 | 64 ～ 420 | 265 ～ 11400 | 7 ～ 1500 | 240 ～ 63342 | 300 ～ 2990 | 6 ～ 1760 | 270 ～ 5100 | 6.9 ～ 725 | - | 12 ～ 2100 | 2 ～ 230 | 31.4 ～ 667.7 | 18 ～ 510 | 2.5 ～ 230 | 490 ～ 2960 | 23 ～ 18816 | 21 ～ 461 | 265 ～ 49588 | 970 | 11 ～ 2120 | 18 ～ 10591 | 6.9 ～ 1860 | 273 ～ 2553 | 360 ～ 5820 | 29.4 ～ 461 | 42.1 ～ 451 | 294 ～ 11081 | 9 ～ 523 | - | 4.2 ～ 149 | 10.7 ～ 754.3 | 300 ～ 2990 | 4.7 ～ 720 | 58 ～ 15000 | 4.6 ～ 1362 |
Loading...Tải…
ConfigureTạo
Specification/DimensionsĐặc điểm kỹ thuật / Kích thướcĐặc điểm kỹ thuật / Kích thước
-
Type
-
Shaft Bore Dia. d(Ø)
- 2
- 4
- 4.5
- 5
- 6
- 6.35
- 7
- 8
- 9
- 9.525
- 10
- 10.2
- 11
- 11.2
- 12
- 12.2
- 12.7
- 13
- 13.2
- 14
- 14.2
- 15
- 15.2
- 16
- 16.2
- 17
- 17.2
- 18
- 18.2
- 19
- 19.2
- 20
- 20.2
- 22
- 22.2
- 24
- 24.2
- 25
- 25.2
- 28
- 28.2
- 30
- 30.2
- 32
- 32.2
- 35
- 35.2
- 36
- 36.2
- 38
- 38.2
- 40
- 40.2
- 42
- 42.2
- 45
- 45.2
- 48
- 48.2
- 50
- 50.2
- 55
- 55.2
- 56
- 56.2
- 60
- 60.2
- 63
- 65
- 70
- 71
- 75
- 80
- 85
- 90
- 95
- 100
- 110
- 120
- 130
- 140
- 150
- 160
- 170
- 180
- 190
- 200
-
Hub Dia.(Ø)
- 8
- 9
- 10
- 11
- 12
- 12.8
- 13
- 13.8
- 14
- 14.8
- 15
- 15.8
- 16
- 17
- 17.8
- 18
- 18.8
- 19
- 19.8
- 20
- 20.8
- 21
- 21.8
- 22
- 23
- 23.8
- 24
- 24.8
- 25
- 25.8
- 26
- 27
- 27.8
- 28
- 29
- 29.8
- 30
- 31
- 31.8
- 32
- 33
- 34
- 34.8
- 35
- 35.8
- 36
- 37
- 38
- 39
- 39.8
- 40
- 41
- 41.8
- 42
- 43
- 43.8
- 44
- 44.8
- 45
- 46
- 47
- 47.8
- 48
- 50
- 51.8
- 52
- 53
- 54
- 54.8
- 55
- 56
- 56.8
- 57
- 59
- 60
- 61.8
- 62
- 63.8
- 64
- 65
- 67
- 67.8
- 68
- 70
- 71
- 72
- 73
- 75
- 77
- 78
- 79
- 80
- 82
- 83
- 84
- 85
- 87
- 88
- 90
- 91
- 95
- 96
- 97
- 100
- 101
- 106
- 110
- 112
- 114
- 115
- 120
- 124
- 125
- 130
- 134
- 135
- 138
- 145
- 148
- 155
- 158
- 165
- 168
- 170
- 178
- 180
- 190
- 191
- 200
- 201
- 210
- 225
- 235
- 250
- 260
-
Body Material
-
Allowable Torque Range(N•m)
-
Centering
-
Surface Treatment
-
Tightening Structure
-
Tightening Method
-
Allowable Torque(N•m)
Application example related to this categoryVí dụ ứng dụng liên quan đến danh mục này
Related Categories to Keyless Bushing (Fastening Fittings)Danh mục liên quan đến Keyless Bushing (Fastening Fittings)
MISUMI Contact
TALK ID : Misumi_vn
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy