How do lead screws and ball screws differ in their applications and efficiency?

Lead screws and ball screws differ in their applications and efficiency due to design variations. Lead screws, using a threaded shaft and nut, suit low-speed, low-precision tasks like manual adjustments. They typically exhibit lower efficiency due to higher friction. In contrast, ball screws integrate ball bearings between the screw and nut, enhancing efficiency, precision, and speed. Consequently, ball screws find favor in high-precision, high-speed applications such as CNC machining, robotics, and aerospace systems where smooth, precise motion is critical, offering superior performance compared to lead screws.

What should be considered when choosing the size of a lead screw for a specific application?

When choosing a lead screw size for an application, consider factors like load capacity, speed, and precision requirements. Determine the necessary length, pitch, and lead based on travel distance and desired linear speed. Ensure proper end support and mounting arrangements to prevent instability. Also, consider environmental conditions, material choice, coating, and acceptable backlash levels. By carefully weighing these aspects, you can select the appropriate lead screw size to ensure optimal performance and reliability for your specific application.

What are the advantages of using a 30-degree trapezoidal lead screw with a double-end step?

Using a 30-degree trapezoidal lead screw with a double-end step offers numerous benefits. These include enhanced load capacity, improved stability, reduced backlash for precise positioning, increased efficiency due to smoother operation, and versatility allowing for flexible design options utilizing both ends. Overall, this configuration provides strength, stability, precision, and adaptability, making it ideal for a wide range of industrial and mechanical applications requiring reliable and precise linear motion.

What distinguishes MiSUMi C-VALUE Lead Screws from standard MiSUMi products in terms of cost and quality?

MiSUMi's C-VALUE Lead Screws offer a balance between cost-effectiveness and quality. They are priced lower than standard MiSUMi products, making them more affordable for applications where precision requirements are less stringent. While C-VALUE Lead Screws maintain a level of quality suitable for many applications, they may not offer the same level of precision and performance as standard products. This means they might have slightly looser tolerances or undergo less rigorous testing. However, they still provide a cost-effective solution for applications where moderate precision is acceptable.

What factors should be considered when selecting a lead screw for high-load applications?

When selecting a lead screw for high-load applications, factors such as load capacity, material strength, diameter, pitch, nut design, and lubrication must be considered. The lead screw should withstand the anticipated load without deformation, requiring a material with high tensile strength and a robust nut design. A larger diameter and coarser pitch help distribute the load effectively, minimizing deflection. Proper lubrication reduces friction and wear, prolonging the lead screw's lifespan under high-load conditions, ensuring reliable performance in demanding applications.

(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.

Tel: 0222-361-1555 Email: cs@misumi.com.vn 8:00 - 17:00 (Mon - Sat)

ものづくりの、明日を支える。MISUMI-VONA 生産材コマースものづくりの、明日を支える。MISUMI-VONA 生産材コマース

Webcode Seach | Series: #CODE

Keyword suggestionsTừ khóa gợi ý

Part number suggestionsGợi ý mã sản phẩm

Discontinued Products

Search by Category / Brand Tìm theo danh mục, nhãn hiệu

Search by Category Tìm theo danh mục

Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 8:00 24/11/2024 to 6:00 (ICT) 25/11/2024. We apologize for the inconvenience.
[Thông báo] Cập nhật địa chỉ kho tập kết hàng hóa tại khu vực miền Nam của MISUMI Việt Nam. Xem chi tiết.
[Announcement] Update on warehouse address in the Southern region of MISUIMI Vietnam. See more. 
[Cảnh Báo] Thủ Đoạn Lừa Đảo Từ Nhân Viên Giao Hàng – Yêu Cầu Trả Phí Ship. Xem chi tiết.
[Warning] Fraud Calling from Shipper - Asking to Pay Shipping Fee. See more.

How can we improve?

How can we improve?

Comments

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy

Thank you for your cooperation.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.

Customer Privacy Policy

Lead Screws, Nuts

Lead screws and nuts are mechanical components used to convert rotational motion into linear motion. A lead screw resembles a threaded rod with a helical groove, while the nut is a component that engages with the threads of the lead screw. As the lead screw rotates, the nut moves along its length, translating the rotational motion into linear movement. These components find widespread use in various applications such as CNC machines, 3D printers, robotics, and positioning systems. They are available in different materials, thread profiles, and sizes to accommodate specific requirements for load capacity, speed, precision, and environmental conditions. Overall, lead screws and nuts are essential for facilitating precise and controlled linear motion in mechanical systems. To select lead screws and nuts from MISUMI, navigate our website, browse the relevant section, use filters to narrow options by size and material, compare products based on specifications, availability, and place your order.

Show More Detail Show More Detail

Brand	(17) (7) THK (1)
Filter By	All Sale Items
CAD	2D 3D
Days to Ship	All Same day 4 Day(s) or Less 6 Day(s) or Less 8 Day(s) or Less 10 Day(s) or Less Others

18 itemsMặt hàng

Sort By

: 30; 45; 60

You can add up to 6 items per a category to the compare list. Compare

MiSUMi Economy

Lead Screws-Both Ends Stepped

MiSUMi Economy

MISUMI

This is an economy item, The price is cheaper than the MISUMI standard product.

CAD ：: 2D / 3D

Shaft Shape	Nominal of Thread D(Ø)	Thread Position	Thread Pitch(mm)	Shaft Material	Shaft Surface Treatment	Type	Tolerance of Central Part (Incomplete Threaded Portion)	Screw Nut Shape	Screw Nut Material	Screw Nut Outer Dia. D(Ø)	Screw Nut Length L(mm)
Both Ends Stepped	8 ～ 25	Right-Hand Thread / Left-Hand Thread	1.5 ～ 5	Steel / Stainless Steel	Not Provided / Black Oxide	Lead Screw	-	-	-	-	-

Days to Ship: Số ngày giao hàng: 14 Day(s) or more

14 Day(s) or more

You can add up to 6 items per a category to the compare list. Compare

MiSUMi Economy

Lead Screws-Straight

MiSUMi Economy

MISUMI

This is an economy item, The price is cheaper than the MISUMI standard product.

CAD ：: 2D / 3D

Shaft Shape	Nominal of Thread D(Ø)	Thread Position	Thread Pitch(mm)	Shaft Material	Shaft Surface Treatment	Type	Tolerance of Central Part (Incomplete Threaded Portion)	Screw Nut Shape	Screw Nut Material	Screw Nut Outer Dia. D(Ø)	Screw Nut Length L(mm)
Straight	8 ～ 25	Right-Hand Thread / Left-Hand Thread	1.5 ～ 5	Steel / Stainless Steel	Not Provided / Black Oxide	Lead Screw	-	-	-	-	-

Days to Ship: Số ngày giao hàng: 10 Day(s) or more

10 Day(s) or more

Economy series

You can add up to 6 items per a category to the compare list. Compare

Lead Screws-One End Double Stepped/One End Stepped

MiSUMi Economy

Lead Screws-One End Double Stepped/One End Stepped

MiSUMi Economy

MISUMI

This is an economy item, The price is cheaper than the MISUMI standard product.

CAD ：: 2D / 3D

Shaft Shape	Nominal of Thread D(Ø)	Thread Position	Thread Pitch(mm)	Shaft Material	Shaft Surface Treatment	Type	Tolerance of Central Part (Incomplete Threaded Portion)	Screw Nut Shape	Screw Nut Material	Screw Nut Outer Dia. D(Ø)	Screw Nut Length L(mm)
One End Stepped, One End Double Stepped	12 ～ 25	Right-Hand Thread / Left-Hand Thread	2 ～ 5	Steel / Stainless Steel	Not Provided / Black Oxide	Lead Screw	-	-	-	-	-

Days to Ship: Số ngày giao hàng: 14 Day(s) or more

14 Day(s) or more

You can add up to 6 items per a category to the compare list. Compare

Lead Screws-Both Ends Stepped/Multi-Pitch

MISUMI

[Features]·One of the most commonly used 30-degree trapezoidal lead screw with double-end step.

CAD ：: 2D / 3D

Shaft Shape	Nominal of Thread D(Ø)	Thread Position	Thread Pitch(mm)	Shaft Material	Shaft Surface Treatment	Type	Tolerance of Central Part (Incomplete Threaded Portion)	Screw Nut Shape	Screw Nut Material	Screw Nut Outer Dia. D(Ø)	Screw Nut Length L(mm)
Both Ends Stepped	8 ～ 50	Right-Hand Thread / Left-Hand Thread	1.5 ～ 8	Steel / Stainless Steel	Not Provided / Low Temperature Black Chrome Plating / Black Oxide	Lead Screw	-	-	-	-	-

Days to Ship: Số ngày giao hàng: 6 Day(s) or more

6 Day(s) or more

Economy series

You can add up to 6 items per a category to the compare list. Compare

Lead Screws-Both Ends Stepped For Support Units

MiSUMi Economy

Lead Screws-Both Ends Stepped For Support Units

MiSUMi Economy

MISUMI

This is an economy item, The price is cheaper than the MISUMI standard product.

CAD ：: 2D / 3D

Shaft Shape	Nominal of Thread D(Ø)	Thread Position	Thread Pitch(mm)	Shaft Material	Shaft Surface Treatment	Type	Tolerance of Central Part (Incomplete Threaded Portion)	Screw Nut Shape	Screw Nut Material	Screw Nut Outer Dia. D(Ø)	Screw Nut Length L(mm)
One End Stepped, One End Double Stepped	12 ～ 25	Right-Hand Thread / Left-Hand Thread	2 ～ 5	Steel / Stainless Steel	Not Provided / Black Oxide	Lead Screw	-	-	-	-	-

Days to Ship: Số ngày giao hàng: 14 Day(s) or more

14 Day(s) or more

You can add up to 6 items per a category to the compare list. Compare

Screw Nut, Screw Shaft, CS Type

THK

The nut and shaft are sold separately. Use THK nuts and shafts (DCM, DC, CS) as a set. No surface treatment is given to the cut shaft ends.[Features]· This DCM type and DC type screw nuts are 30° trapezoidal lead screws manufactured to comply with the applicable standards.· The nut uses a special alloy and is die-cast molded with a precision male thread as its core.· For this reason, it has less variation in accuracy than machined products, and is a bearing with high-accuracy and excellent abrasion-resistance.· The combination screw shaft has been standardized through a rolling formation method.· Improved abrasion-resistance: Cold rolled tooth shaft with tooth surface hardened to 250 HV or more and finished to a smooth mirror finish for superior abrasion-resistance. The combination of screw nuts provides extremely smooth movement.· Improved mechanical properties: Because of the internal tooth structure of the rolled shaft, the fiber flow occurs along the tooth contours for tight rooted teeth with greater endurance strength.· Alteration of shaft end support: The rolled shaft with altered shaft end support bearing part is easier to use in turning and milling.

CAD ：: 2D / 3D

Shaft Shape	Nominal of Thread D(Ø)	Thread Position	Thread Pitch(mm)	Shaft Material	Shaft Surface Treatment	Type	Tolerance of Central Part (Incomplete Threaded Portion)	Screw Nut Shape	Screw Nut Material	Screw Nut Outer Dia. D(Ø)	Screw Nut Length L(mm)
Straight	12 ～ 50	Right-Hand Thread	-	Steel	Not Provided	Screw Nuts	Not Provided	Straight / Round Flanged	Zinc Alloy	22 ～ 68	22 ～ 80

From: 629,035 VND
Special Price
Days to Ship: Số ngày giao hàng: Same day or more

Same day or more

You can add up to 6 items per a category to the compare list. Compare

Lead Screws-Both Ends Stepped

MISUMI

[Features]·One of the most commonly used 30-degree trapezoidal lead screw with double-end step type.

CAD ：: 2D / 3D

Shaft Shape	Nominal of Thread D(Ø)	Thread Position	Thread Pitch(mm)	Shaft Material	Shaft Surface Treatment	Type	Tolerance of Central Part (Incomplete Threaded Portion)	Screw Nut Shape	Screw Nut Material	Screw Nut Outer Dia. D(Ø)	Screw Nut Length L(mm)
Both Ends Stepped	10 ～ 50	Right and Left-Hand Thread	2 ～ 8	Steel	Not Provided / Low Temperature Black Chrome Plating / Black Oxide	Lead Screw	Not Provided / Provided (h7)	-	-	-	-

Days to Ship: Số ngày giao hàng: 6 Day(s) or more

6 Day(s) or more

You can add up to 6 items per a category to the compare list. Compare

Lead Screws-One End Double Stepped/One End Stepped

MISUMI

[Features]Easy installation type into the trapezoidal lead screw support unit.

CAD ：: 2D / 3D

Shaft Shape	Nominal of Thread D(Ø)	Thread Position	Thread Pitch(mm)	Shaft Material	Shaft Surface Treatment	Type	Tolerance of Central Part (Incomplete Threaded Portion)	Screw Nut Shape	Screw Nut Material	Screw Nut Outer Dia. D(Ø)	Screw Nut Length L(mm)
-	12 ～ 50	Right-Hand Thread / Left-Hand Thread	2 ～ 8	Steel / Stainless Steel	Not Provided / Low Temperature Black Chrome Plating / Black Oxide	Lead Screw	-	-	-	-	-

Days to Ship: Số ngày giao hàng: 6 Day(s) or more

6 Day(s) or more

You can add up to 6 items per a category to the compare list. Compare

Lead Screws For Support Units

MISUMI

A 30 degree trapezoidal screw intended for installation from bearings, rotation stops, position indicators to handles.

CAD ：: 2D / 3D

Shaft Shape	Nominal of Thread D(Ø)	Thread Position	Thread Pitch(mm)	Shaft Material	Shaft Surface Treatment	Type	Tolerance of Central Part (Incomplete Threaded Portion)	Screw Nut Shape	Screw Nut Material	Screw Nut Outer Dia. D(Ø)	Screw Nut Length L(mm)
-	12 ～ 25	Right-Hand Thread / Left-Hand Thread	2 ～ 5	Steel / Stainless Steel	Not Provided / Low Temperature Black Chrome Plating / Black Oxide	Lead Screw	-	-	-	-	-

Days to Ship: Số ngày giao hàng: 6 Day(s) or more

6 Day(s) or more

Economy series

You can add up to 6 items per a category to the compare list. Compare

MiSUMi Economy

Lead Screws-One End Stepped Type

MiSUMi Economy

MISUMI

- Lead Screws-One End Stepped Type- C-MTSRA, C-MTSTRA, C-MTSRB and C-MTSTRB are in MISUMI economy series.- C-MTSRA and C-MTSTRA are Screw Turn Direction: Right-hand thread- C-MTSRB and C-MTSTRB are Screw Turn Direction: Right-Hand Thread with Keyway- Material of C-MTSRA and C-MTSRB: Equivalent to S45C- Material of C-MTSTRA and C-MTSTRB: Equivalent to SUS303- Thread Nominal Dia.: 8, 10, 12, 14, 16, 20, 22 and 25 mm.- Shaft Overall Length L: 50-1200 mm.- Thead pitch: 1.5, 2, 3 ,4 and 5

Shaft Shape	Nominal of Thread D(Ø)	Thread Position	Thread Pitch(mm)	Shaft Material	Shaft Surface Treatment	Type	Tolerance of Central Part (Incomplete Threaded Portion)	Screw Nut Shape	Screw Nut Material	Screw Nut Outer Dia. D(Ø)	Screw Nut Length L(mm)
One End Stepped	8 ～ 25	Right-Hand Thread / Left-Hand Thread	1.5 ～ 5	Steel / Stainless Steel	Not Provided / Black Oxide	Lead Screw	-	-	-	-	-

Days to Ship: Số ngày giao hàng: 14 Day(s) or more

14 Day(s) or more

You can add up to 6 items per a category to the compare list. Compare

Lead Screws-One Ends Double Stpped/Both Hand Thread

MISUMI

[Features]Easy installation type into the trapezoidal lead screw support unit.

CAD ：: 2D / 3D

Shaft Shape	Nominal of Thread D(Ø)	Thread Position	Thread Pitch(mm)	Shaft Material	Shaft Surface Treatment	Type	Tolerance of Central Part (Incomplete Threaded Portion)	Screw Nut Shape	Screw Nut Material	Screw Nut Outer Dia. D(Ø)	Screw Nut Length L(mm)
-	12 ～ 50	Right and Left-Hand Thread / Precision Right and Left-Hand Thread	2 ～ 8	Steel	Not Provided / Low Temperature Black Chrome Plating / Black Oxide	Lead Screw	Not Provided / Provided (h7)	-	-	-	-

Days to Ship: Số ngày giao hàng: 6 Day(s) or more

6 Day(s) or more

You can add up to 6 items per a category to the compare list. Compare

Lead Screws-One End Stepped

MISUMI

[Features]·30-degree trapezoidal lead screw that is used when there is no problem with a cantilever.

CAD ：: 2D / 3D

Shaft Shape	Nominal of Thread D(Ø)	Thread Position	Thread Pitch(mm)	Shaft Material	Shaft Surface Treatment	Type	Tolerance of Central Part (Incomplete Threaded Portion)	Screw Nut Shape	Screw Nut Material	Screw Nut Outer Dia. D(Ø)	Screw Nut Length L(mm)
One End Stepped	8 ～ 50	Right-Hand Thread	1.5 ～ 8	Steel / Stainless Steel	Not Provided / Low Temperature Black Chrome Plating / Black Oxide	Lead Screw	-	-	-	-	-

Days to Ship: Số ngày giao hàng: 6 Day(s) or more

6 Day(s) or more

You can add up to 6 items per a category to the compare list. Compare

Lead Screws-Straight

MISUMI

Since the length is configurable in 1mm increment, the time of machining can be saved after purchasing the product.

CAD ：: 2D / 3D

Shaft Shape	Nominal of Thread D(Ø)	Thread Position	Thread Pitch(mm)	Shaft Material	Shaft Surface Treatment	Type	Tolerance of Central Part (Incomplete Threaded Portion)	Screw Nut Shape	Screw Nut Material	Screw Nut Outer Dia. D(Ø)	Screw Nut Length L(mm)
Straight	8 ～ 50	Right-Hand Thread / Left-Hand Thread	1.5 ～ 8	Steel / Stainless Steel	Not Provided / Black Oxide	Lead Screw	-	-	-	-	-

Days to Ship: Số ngày giao hàng: 6 Day(s) or more

6 Day(s) or more

Economy series

You can add up to 6 items per a category to the compare list. Compare

MiSUMi Economy

Lead Screws-One End Double Stepped Type

MiSUMi Economy

MISUMI

- Lead Screws-One End Double Stepped Type- C-MTSRC, C-MTSTRC, C-MTSRD and C-MTSTRD are in MISUMI economy series.- C-MTSRC and C-MTSTRC are Screw Turn Direction: Right-hand thread- C-MTSRD and C-MTSTRD are Screw Turn Direction: Right-Hand Thread with Keyway- Material of C-MTSRC and C-MTSRD: Equivalent to S45C- Material of C-MTSTRC and C-MTSTRD: Equivalent to SUS303- Thread Nominal Dia.: 12, 14, 16, 20, 22 and 25 mm.- Shaft Overall Length L: 80-1200 mm.- Thead pitch: 2, 3 ,4 and 5

Shaft Shape	Nominal of Thread D(Ø)	Thread Position	Thread Pitch(mm)	Shaft Material	Shaft Surface Treatment	Type	Tolerance of Central Part (Incomplete Threaded Portion)	Screw Nut Shape	Screw Nut Material	Screw Nut Outer Dia. D(Ø)	Screw Nut Length L(mm)
One End Double Stepped	12 ～ 25	Right-Hand Thread / Left-Hand Thread	2 ～ 5	Steel / Stainless Steel	Not Provided / Black Oxide	Lead Screw	-	-	-	-	-

Days to Ship: Số ngày giao hàng: 14 Day(s) or more

14 Day(s) or more

You can add up to 6 items per a category to the compare list. Compare

Lead Screws-Both Ends Double Stepped

MISUMI

"Since the alterations can be added to both ends double-stepped, this product can give support for complicated unit designing."

CAD ：: 2D / 3D

Shaft Shape	Nominal of Thread D(Ø)	Thread Position	Thread Pitch(mm)	Shaft Material	Shaft Surface Treatment	Type	Tolerance of Central Part (Incomplete Threaded Portion)	Screw Nut Shape	Screw Nut Material	Screw Nut Outer Dia. D(Ø)	Screw Nut Length L(mm)
Both Ends Double Stepped	12 ～ 50	Right-Hand Thread / Left-Hand Thread	2 ～ 8	Steel	Not Provided / Black Oxide	Lead Screw	-	-	-	-	-

Days to Ship: Số ngày giao hàng: 6 Day(s) or more

6 Day(s) or more

Economy series

You can add up to 6 items per a category to the compare list. Compare

MiSUMi Economy

Lead Screws-Both End Double Stepped Type

MiSUMi Economy

MISUMI

- Lead Screws-Both End Double Stepped Type- C-MTSRX and C-MTSTRX both are in MISUMI economy series.- Screw Turn Direction : Right-hand thread- Material of C-MTSRX Lead Screws: Equivalent to S45C- Material of C-MTSTRX Lead Screws: Equivalent to SUS303- Thread Nominal Dia.: 12, 14, 16, 20, 22 and 25 mm.- Shaft Overall Length L: 80-1200 mm.- Thead pitch: 2, 3 ,4 and 5- How to select code for order please check on Misumi Economy catalog or Misumi official website.

Shaft Shape	Nominal of Thread D(Ø)	Thread Position	Thread Pitch(mm)	Shaft Material	Shaft Surface Treatment	Type	Tolerance of Central Part (Incomplete Threaded Portion)	Screw Nut Shape	Screw Nut Material	Screw Nut Outer Dia. D(Ø)	Screw Nut Length L(mm)
Both Ends Double Stepped	12 ～ 25	Right-Hand Thread / Left-Hand Thread	2 ～ 5	Steel / Stainless Steel	Not Provided / Black Oxide	Lead Screw	-	-	-	-	-

Days to Ship: Số ngày giao hàng: 14 Day(s) or more

14 Day(s) or more

You can add up to 6 items per a category to the compare list. Compare

Lead Screws-One End Double Stepped

MISUMI

[Features]·30-degree trapezoidal lead screw that is used when there is no problem with a cantilever.

CAD ：: 2D / 3D

Shaft Shape	Nominal of Thread D(Ø)	Thread Position	Thread Pitch(mm)	Shaft Material	Shaft Surface Treatment	Type	Tolerance of Central Part (Incomplete Threaded Portion)	Screw Nut Shape	Screw Nut Material	Screw Nut Outer Dia. D(Ø)	Screw Nut Length L(mm)
One End Double Stepped	12 ～ 50	Right-Hand Thread	2 ～ 8	Steel / Stainless Steel	Not Provided / Low Temperature Black Chrome Plating / Black Oxide	Lead Screw	-	-	-	-	-

Days to Ship: Số ngày giao hàng: 6 Day(s) or more

6 Day(s) or more

You can add up to 6 items per a category to the compare list. Compare

Lead Screws-Straight/Both Hand Thread

MISUMI

"Since the length is configurable in 1mm increment, the time of machining can be saved after purchasing the product."

CAD ：: 2D / 3D

Shaft Shape	Nominal of Thread D(Ø)	Thread Position	Thread Pitch(mm)	Shaft Material	Shaft Surface Treatment	Type	Tolerance of Central Part (Incomplete Threaded Portion)	Screw Nut Shape	Screw Nut Material	Screw Nut Outer Dia. D(Ø)	Screw Nut Length L(mm)
Straight	10 ～ 50	Right and Left-Hand Thread	2 ～ 8	Steel	Not Provided / Black Oxide	Lead Screw	Not Provided	-	-	-	-

Days to Ship: Số ngày giao hàng: 6 Day(s) or more

6 Day(s) or more


BrandNhãn hiệu
Product SeriesDòng sản phẩm
CADCAD
From
Days to ShipSố ngày giao hàng
SpecificationsĐặc điểm kĩ thuật
Shaft Shape
Nominal of Thread D(Ø)
Thread Position
Thread Pitch(mm)
Shaft Material
Shaft Surface Treatment
Type
Tolerance of Central Part (Incomplete Threaded Portion)
Screw Nut Shape
Screw Nut Material
Screw Nut Outer Dia. D(Ø)
Screw Nut Length L(mm)

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
BrandNhãn hiệu	MISUMI MiSUMi Economy	MISUMI MiSUMi Economy	MISUMI MiSUMi Economy	MISUMI	MISUMI MiSUMi Economy	THK	MISUMI	MISUMI	MISUMI	MISUMI MiSUMi Economy	MISUMI	MISUMI	MISUMI	MISUMI MiSUMi Economy	MISUMI	MISUMI MiSUMi Economy	MISUMI	MISUMI
Product SeriesDòng sản phẩm	Lead Screws-Both Ends Stepped	Lead Screws-Straight	Lead Screws-One End Double Stepped/One End Stepped	Lead Screws-Both Ends Stepped/Multi-Pitch	Lead Screws-Both Ends Stepped For Support Units	Screw Nut, Screw Shaft, CS Type	Lead Screws-Both Ends Stepped	Lead Screws-One End Double Stepped/One End Stepped	Lead Screws For Support Units	Lead Screws-One End Stepped Type	Lead Screws-One Ends Double Stpped/Both Hand Thread	Lead Screws-One End Stepped	Lead Screws-Straight	Lead Screws-One End Double Stepped Type	Lead Screws-Both Ends Double Stepped	Lead Screws-Both End Double Stepped Type	Lead Screws-One End Double Stepped	Lead Screws-Straight/Both Hand Thread
CADCAD	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D		2D / 3D	2D / 3D	2D / 3D		2D / 3D		2D / 3D	2D / 3D
From						629,035 VND Special Price On Sale Till 31/03/2025
Days to ShipSố ngày giao hàng	14 Day(s) or more	10 Day(s) or more	14 Day(s) or more	6 Day(s) or more	14 Day(s) or more	Same day or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	14 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	14 Day(s) or more	6 Day(s) or more	14 Day(s) or more	6 Day(s) or more	6 Day(s) or more
SpecificationsĐặc điểm kĩ thuật
Shaft Shape	Both Ends Stepped	Straight	One End Stepped, One End Double Stepped	Both Ends Stepped	One End Stepped, One End Double Stepped	Straight	Both Ends Stepped	-	-	One End Stepped	-	One End Stepped	Straight	One End Double Stepped	Both Ends Double Stepped	Both Ends Double Stepped	One End Double Stepped	Straight
Nominal of Thread D(Ø)	8 ～ 25	8 ～ 25	12 ～ 25	8 ～ 50	12 ～ 25	12 ～ 50	10 ～ 50	12 ～ 50	12 ～ 25	8 ～ 25	12 ～ 50	8 ～ 50	8 ～ 50	12 ～ 25	12 ～ 50	12 ～ 25	12 ～ 50	10 ～ 50
Thread Position	Right-Hand Thread / Left-Hand Thread	Right-Hand Thread / Left-Hand Thread	Right-Hand Thread / Left-Hand Thread	Right-Hand Thread / Left-Hand Thread	Right-Hand Thread / Left-Hand Thread	Right-Hand Thread	Right and Left-Hand Thread	Right-Hand Thread / Left-Hand Thread	Right-Hand Thread / Left-Hand Thread	Right-Hand Thread / Left-Hand Thread	Right and Left-Hand Thread / Precision Right and Left-Hand Thread	Right-Hand Thread	Right-Hand Thread / Left-Hand Thread	Right-Hand Thread / Left-Hand Thread	Right-Hand Thread / Left-Hand Thread	Right-Hand Thread / Left-Hand Thread	Right-Hand Thread	Right and Left-Hand Thread
Thread Pitch(mm)	1.5 ～ 5	1.5 ～ 5	2 ～ 5	1.5 ～ 8	2 ～ 5	-	2 ～ 8	2 ～ 8	2 ～ 5	1.5 ～ 5	2 ～ 8	1.5 ～ 8	1.5 ～ 8	2 ～ 5	2 ～ 8	2 ～ 5	2 ～ 8	2 ～ 8
Shaft Material	Steel / Stainless Steel	Steel / Stainless Steel	Steel / Stainless Steel	Steel / Stainless Steel	Steel / Stainless Steel	Steel	Steel	Steel / Stainless Steel	Steel / Stainless Steel	Steel / Stainless Steel	Steel	Steel / Stainless Steel	Steel / Stainless Steel	Steel / Stainless Steel	Steel	Steel / Stainless Steel	Steel / Stainless Steel	Steel
Shaft Surface Treatment	Not Provided / Black Oxide	Not Provided / Black Oxide	Not Provided / Black Oxide	Not Provided / Low Temperature Black Chrome Plating / Black Oxide	Not Provided / Black Oxide	Not Provided	Not Provided / Low Temperature Black Chrome Plating / Black Oxide	Not Provided / Low Temperature Black Chrome Plating / Black Oxide	Not Provided / Low Temperature Black Chrome Plating / Black Oxide	Not Provided / Black Oxide	Not Provided / Low Temperature Black Chrome Plating / Black Oxide	Not Provided / Low Temperature Black Chrome Plating / Black Oxide	Not Provided / Black Oxide	Not Provided / Black Oxide	Not Provided / Black Oxide	Not Provided / Black Oxide	Not Provided / Low Temperature Black Chrome Plating / Black Oxide	Not Provided / Black Oxide
Type	Lead Screw	Lead Screw	Lead Screw	Lead Screw	Lead Screw	Screw Nuts	Lead Screw	Lead Screw	Lead Screw	Lead Screw	Lead Screw	Lead Screw	Lead Screw	Lead Screw	Lead Screw	Lead Screw	Lead Screw	Lead Screw
Tolerance of Central Part (Incomplete Threaded Portion)	-	-	-	-	-	Not Provided	Not Provided / Provided (h7)	-	-	-	Not Provided / Provided (h7)	-	-	-	-	-	-	Not Provided
Screw Nut Shape	-	-	-	-	-	Straight / Round Flanged	-	-	-	-	-	-	-	-	-	-	-	-
Screw Nut Material	-	-	-	-	-	Zinc Alloy	-	-	-	-	-	-	-	-	-	-	-	-
Screw Nut Outer Dia. D(Ø)	-	-	-	-	-	22 ～ 68	-	-	-	-	-	-	-	-	-	-	-	-
Screw Nut Length L(mm)	-	-	-	-	-	22 ～ 80	-	-	-	-	-	-	-	-	-	-	-	-

Loading...Tải…

ConfigureTạo

Specification/DimensionsĐặc điểm kỹ thuật / Kích thướcĐặc điểm kỹ thuật / Kích thước

Shaft Shape
Larger Image

ClearTrống

Nominal of Thread D(Ø)
8

10

12

14

16

18

20

22

25

28

32

36

40

45

50
Drawing

ClearTrống

Thread Position
ClearTrống

Thread Pitch(mm)
1.5

2

3

4

5

6

8
ClearTrống

Shaft Material
- Steel
- Stainless Steel
ClearTrống

Shaft Surface Treatment
- Not Provided
- Low Temperature Black Chrome Plating
- Black Oxide
ClearTrống

Type
- Lead Screw
- Screw Nuts
ClearTrống

Tolerance of Central Part (Incomplete Threaded Portion)
- Not Provided
- Provided (h7)
ClearTrống

Screw Nut Shape
- Straight
- Round Flanged
Larger Image

ClearTrống

Screw Nut Material
- Zinc Alloy
ClearTrống

Screw Nut Outer Dia. D(Ø)
22

28

32

36

44

52

58

64

68
Drawing

ClearTrống

Screw Nut Length L(mm)
22

26

30

31

35

40

45

49

50

56

60

70

75

80
Drawing

ClearTrống

Application example related to this categoryVí dụ ứng dụng liên quan đến danh mục này

back next

Related Categories to Lead Screws, NutsDanh mục liên quan đến Lead Screws, Nuts

FAQ Lead Screws, Nuts

Question: How do lead screws and ball screws differ in their applications and efficiency?: Answer: Lead screws and ball screws differ in their applications and efficiency due to design variations. Lead screws, using a threaded shaft and nut, suit low-speed, low-precision tasks like manual adjustments. They typically exhibit lower efficiency due to higher friction. In contrast, ball screws integrate ball bearings between the screw and nut, enhancing efficiency, precision, and speed. Consequently, ball screws find favor in high-precision, high-speed applications such as CNC machining, robotics, and aerospace systems where smooth, precise motion is critical, offering superior performance compared to lead screws.
Question: What should be considered when choosing the size of a lead screw for a specific application?: Answer: When choosing a lead screw size for an application, consider factors like load capacity, speed, and precision requirements. Determine the necessary length, pitch, and lead based on travel distance and desired linear speed. Ensure proper end support and mounting arrangements to prevent instability. Also, consider environmental conditions, material choice, coating, and acceptable backlash levels. By carefully weighing these aspects, you can select the appropriate lead screw size to ensure optimal performance and reliability for your specific application.
Question: What are the advantages of using a 30-degree trapezoidal lead screw with a double-end step?: Answer: Using a 30-degree trapezoidal lead screw with a double-end step offers numerous benefits. These include enhanced load capacity, improved stability, reduced backlash for precise positioning, increased efficiency due to smoother operation, and versatility allowing for flexible design options utilizing both ends. Overall, this configuration provides strength, stability, precision, and adaptability, making it ideal for a wide range of industrial and mechanical applications requiring reliable and precise linear motion.
Question: What distinguishes MiSUMi C-VALUE Lead Screws from standard MiSUMi products in terms of cost and quality?: Answer: MiSUMi's C-VALUE Lead Screws offer a balance between cost-effectiveness and quality. They are priced lower than standard MiSUMi products, making them more affordable for applications where precision requirements are less stringent. While C-VALUE Lead Screws maintain a level of quality suitable for many applications, they may not offer the same level of precision and performance as standard products. This means they might have slightly looser tolerances or undergo less rigorous testing. However, they still provide a cost-effective solution for applications where moderate precision is acceptable.
Question: What factors should be considered when selecting a lead screw for high-load applications?: Answer: When selecting a lead screw for high-load applications, factors such as load capacity, material strength, diameter, pitch, nut design, and lubrication must be considered. The lead screw should withstand the anticipated load without deformation, requiring a material with high tensile strength and a robust nut design. A larger diameter and coarser pitch help distribute the load effectively, minimizing deflection. Proper lubrication reduces friction and wear, prolonging the lead screw's lifespan under high-load conditions, ensuring reliable performance in demanding applications.

Top of the page

About MISUMIVề Misumi

About this WebsiteVề trang Web này

Useful ToolsCác công cụ hữu ích

Customer ServiceDịch vụ chăm sóc khách hàng

MISUMI Contact Monday to Saturday: 8:00 am - 5:00 pm Order cut off time is 5:00 pm Thứ 2 đến Thứ 7: 8 giờ sáng đến 5 giờ chiều Hạn chót đặt hàng là 5 giờ chiều

Tel:Số điện thoại:0222-361-1555
Fax:Số Fax:0222-361-2555
InquiryYêu cầu

MISUMI APP

Install MISUMI APP

MISUMI Vietnam Company Limited, Legal Representative: Tomohiro Watanabe,
phone: 0222-361-1555, e-mail: cs@misumi.com.vn, Enterprise Code: 0107514576,
Date of Issuance: 22 July 2016, Place of Issuance: Bac Ninh, Business Certificate No. 6573041568-KD dated 27 September 2016 issued by the People's Committee of Bac Ninh

Công ty TNHH MISUMI Việt Nam, Đại diện theo pháp luật: Tomohiro Watanabe,
Điện thoại: 0222-361-1555, e-mail: cs@misumi.com.vn, Mã số doanh nghiệp: 0107514576,
ngày cấp 22/7/2016, nơi cấp: Bắc Ninh, Giấy phép kinh doanh số: 6573041568-KD ngày cấp 27/9/2016 bởi UBND tỉnh Bắc Ninh

Search by Category / Brand Tìm theo danh mục, nhãn hiệu

Search by Category Tìm theo danh mục

How can we improve?

Lead Screws, Nuts

ConfigureTạo

Specification/DimensionsĐặc điểm kỹ thuật / Kích thướcĐặc điểm kỹ thuật / Kích thước

Shaft Shape

Nominal of Thread D(Ø)

Thread Position

Thread Pitch(mm)

Shaft Material

Shaft Surface Treatment

Type

Tolerance of Central Part (Incomplete Threaded Portion)

Screw Nut Shape

Screw Nut Material

Screw Nut Outer Dia. D(Ø)

Screw Nut Length L(mm)

Application example related to this categoryVí dụ ứng dụng liên quan đến danh mục này

Related Categories to Lead Screws, NutsDanh mục liên quan đến Lead Screws, Nuts

FAQ Lead Screws, Nuts

About MISUMIVề Misumi

About this WebsiteVề trang Web này

Useful ToolsCác công cụ hữu ích

Customer ServiceDịch vụ chăm sóc khách hàng

MISUMI Contact Monday to Saturday: 8:00 am - 5:00 pm Order cut off time is 5:00 pm Thứ 2 đến Thứ 7: 8 giờ sáng đến 5 giờ chiều Hạn chót đặt hàng là 5 giờ chiều