SUMITOMO ELECTRIC HARDMETAL Cutters / Indexable End Mills（Page2）

• You can add up to 6 items per a category to the compare list. Compare

  

  Used for SEC-Sumi Dual Mill, DGC Model DGCF-R

  SUMITOMO ELECTRIC HARDMETAL

  Uses an insert which allows the use of 16 on both surfaces and shows excellent economic efficiency.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Groove / Chamfer	50 (52.9) ～ 250 (252.9)	general steel / Quenched and tempered steel / Stainless Steel / Cast Iron	Rough and medium rough processing	-	5 ～ 18	Arbor	-	-	6 (SNMT/SNET Tip) / 3 (ONMT/ONET Tip)	-

  From: 12,740,346 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Used for SEC-Sumi Dual Mill, DGC Model DGCM-R

  SUMITOMO ELECTRIC HARDMETAL

  Uses an insert which allows the use of 16 on both surfaces and shows excellent economic efficiency.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Groove / Chamfer	50 (52.9) ～ 250 (252.9)	general steel / Quenched and tempered steel / Stainless Steel / Cast Iron	Rough and medium rough processing	-	4 ～ 14	Arbor	-	-	6 (SNMT/SNET Tip) / 3 (ONMT/ONET Tip)	-

  From: 10,619,906 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Used for SEC-Sumi Dual Mill, DGC Model DGC-R

  SUMITOMO ELECTRIC HARDMETAL

  [Features]・ Adopts inserts that can be used in up to 16 corners on both sides, demonstrating excellent cost-effectiveness.・ A general-purpose cutter that achieves high-efficiency machining with high cutting edge strength, and adopts a low-burr chip breaker design, enabling a high level of machined surface quality.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Groove / Chamfer	40(42.9) ～ 250 (252.9)	general steel / Quenched and tempered steel / Stainless Steel / Cast Iron	Rough and medium rough processing	-	3 ～ 10	Arbor	-	-	6 (SNMT/SNET Tip) / 3 (ONMT/ONET Tip)	-

  From: 8,499,466 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Used for SEC-Sumi Power Mill, PWC Model PWCF-R

  SUMITOMO ELECTRIC HARDMETAL

  [Features]·A multi-flute type Sumi power mill with a high efficiency semi-shoulder for slab milling, side milling, grooving, chamfering, etc., of cast iron.Maximum cutting depth (Ad) (mm): 15

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Side / Groove / Chamfer	80 ～ 200	Cast Iron	Rough and medium rough processing	-	9 ～ 24	Arbor	-	-	15	-

  From: 21,980,068 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Used for SEC-Sumi Power Mill, PWC Model PWC-R

  SUMITOMO ELECTRIC HARDMETAL

  [Features]・ Vertically-mounted inserts with excellent cutting edge strength and optimized chip breaker achieve both outstanding cutting edge strength and cutting performance.·This product achieves stable machining with little chattering even with a large tool runout.·It can be used for a variety of work materials.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Side / Groove / Chamfer	80 ～ 200	Cast Iron	Rough and medium rough processing	-	7 ～ 16	Arbor	-	-	15	-

  From: 18,289,019 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Used for SEC-Sumi Power Mill, PWS Model PWSF-R

  SUMITOMO ELECTRIC HARDMETAL

  High reliability corner cutter equipped with a vertical insert that combines high cutting edge strength with a sharp cutting edge.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Side / Groove	80 ～ 250	general steel / Quenched and tempered steel / Stainless Steel / Cast Iron	Rough and medium rough processing	-	6 ～ 14	Arbor	-	-	16	-

  From: 20,374,049 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Used for SEC-Sumi Power Mill, PWS Model PWS-R

  SUMITOMO ELECTRIC HARDMETAL

  A highly reliable corner cutter equipped with vertical inserts that combine high cutting edge strength with sharp cutting edge quality.[Features]・ Vertically-mounted inserts with excellent cutting edge strength and optimized chip breaker achieve both outstanding cutting edge strength and cutting performance.・ High-precision molding technology has made it successful to commercialize vertically-mounted inserts with nick grooves, and achieved stable machining with less chattering even in applications with large tool protrusion.・ Supports various work materials by adopting ACP and ACK series.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Side / Groove	80 ～ 250	general steel / Quenched and tempered steel / Stainless Steel / Cast Iron	Rough and medium rough processing	-	4 ～ 12	Arbor	-	-	16	-

  From: 16,981,424 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Used for SEC-Wave Mill, WEX Model WEX-E

  SUMITOMO ELECTRIC HARDMETAL

  Low resistance insert with reinforced cutting edge, high-precision cutting edge, high durability body, a wide range of insert variations, and all part numbers equipped with air holes.[Features]・ Improved cutting edge strength and reduced cutting force by adopting a uniquely curved cutting edge. Achieves a high-quality machined surface that approaches the finishing area with a high-precision cutting edge. Smooth machining even with deep groove machining and low-rigidity machines.・ Improved cutting chip discharge with air and coolant.・ Special surface treatment improves corrosion and scratch resistance, and the increase in thread size improves clamping force and durability.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Side / Groove	25 ～ 63	general steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum / Titanium	Rough and medium rough processing	120 ～ 220	2 ～ 6	With handle	20 ～ 42	25 ～ 80	14	-

  From: 5,340,149 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Used for SEC-Wave Mill, WFX Model WFX-E

  SUMITOMO ELECTRIC HARDMETAL

  A screw mount type cutter capable of using on 4 corners.Ideal blade shape provides favorable wall accuracy.[Features]・ The insert shape optimized for corner cutting and the high-precision body achieve excellent machining quality.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Side / Groove	40 ～ 80	general steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum	Rough and medium rough processing	120	3 ～ 4	With handle	32	30	10	-

  From: 9,135,657 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Used for SEC-Wave Mill, WFX Model WFXF-E

  SUMITOMO ELECTRIC HARDMETAL

  Screw-fastened cutter enabling 4-corner use. With an ideal cutting edge shape, good wall surface accuracy can be gained.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Side / Groove	50 ～ 80	general steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum	Rough and medium rough processing	120	4 ～ 6	With handle	32	30	10	-

  From: 10,619,906 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Used for SEC-Wave Mill, WFX Model WFXF-R

  SUMITOMO ELECTRIC HARDMETAL

  A screw mount type cutter capable of using on 4 corners.Ideal blade shape provides favorable wall accuracy.[Features]・ The insert shape optimized for corner cutting and the high-precision body achieve excellent machining quality.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Side / Groove	50 ～ 200	general steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum	Rough and medium rough processing	-	4 ～ 16	Arbor	-	-	10	-

  From: 8,605,497 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  WFX-R For SEC-Wave Mill WFX Model

  SUMITOMO ELECTRIC HARDMETAL

  Screw locked cutter, enabling using 4 corners. Ideal blade shape provides favorable wall precision.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Side / Groove	50 ～ 250	general steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum	Rough and medium rough processing	-	3 ～ 12	Arbor	-	-	10	-

  From: 7,439,344 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Used for SEC-Wave Mill, WGC Model WGC-EW

  SUMITOMO ELECTRIC HARDMETAL

  [Features]·This general-purpose cutter with a handle provides high performance and machining accuracy and can be used in a wide range of applications.Maximum cutting depth (Ad) (mm): 4, 6

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Groove / Chamfer	20 ～ 63	general steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum / Titanium	Rough and medium rough processing	100 ～ 125	2 ～ 6	With handle	20 ～ 32	40	4 ～ 6	-

  From: 5,318,903 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Used for SEC-Wave Mill, WGX Model WGX-EW

  SUMITOMO ELECTRIC HARDMETAL

  [Features]·This product provides an excellent finished surface by improving the runout accuracy of the cutting edge and by using a unique wiper edge shape.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Groove / Chamfer	32 ～ 63	general steel / Quenched and tempered steel / Stainless Steel / Cast Iron	Rough and medium rough processing	125	3 ～ 5	With handle	32	40	6	-

  From: 8,075,535 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Used for SEC-Sumi Dual, DGC Model DGC-EW

  SUMITOMO ELECTRIC HARDMETAL

  Uses an insert which allows the use of 16 on both surfaces and shows excellent economic efficiency.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Groove / Chamfer	40 ～ 60	general steel / Quenched and tempered steel / Stainless Steel / Cast Iron	Rough and medium rough processing	125	3 ～ 4	With handle	32	40	3 ～ 6	-

  From: 9,135,657 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Used for SEC-Wave Mill, WEX Model WEX-F

  SUMITOMO ELECTRIC HARDMETAL

  [Features]・ Improved cutting edge strength and reduced cutting force by adopting a uniquely curved cutting edge. Achieves a high-quality machined surface that approaches the finishing area with a high-precision cutting edge. Smooth machining even with deep groove machining and low-rigidity machines.・ Improved cutting chip discharge with air and coolant.・ Special surface treatment improves corrosion and scratch resistance, and the increase in thread size improves clamping force and durability.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Side / Groove	40 ～ 63	general steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum / Titanium	Rough and medium rough processing	-	4 ～ 6	Arbor	-	-	14	-

  From: 8,117,830 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Used for SEC-Wave Mill, WEX Model WEXF-R

  SUMITOMO ELECTRIC HARDMETAL

  Special surface processing improves corrosion resistance and scratch resistance. Clamping strength and durability are improved by the increase in screw size.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Side / Groove	80 ～ 125	general steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum / Titanium	Rough and medium rough processing	-	7 ～ 9	Arbor	-	-	14	-

  From: 12,740,346 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Used for SEC-Wave Mill, WGC Model WGCF-R

  SUMITOMO ELECTRIC HARDMETAL

  Achieves world class performance and machining precision as a general purpose cutter that is usable in a wide range of applications.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Groove / Chamfer	80 ～ 200	general steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum / Titanium	Rough and medium rough processing	-	8 ～ 20	Arbor	-	-	6	-

  From: 15,581,764 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Used for SEC-Wave Mill, WGC Model WGC(F)-RS

  SUMITOMO ELECTRIC HARDMETAL

  [Features]·The high precision of the body and inserts allows for high-quality machining.·This product has high sharpness and strength, and a wide variety of insert items can meet a wide range of needs.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Groove / Chamfer	32 ～ 63	general steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum / Titanium	Rough and medium rough processing	-	3 ～ 6	Arbor	-	-	4 ～ 6	-

  From: 5,870,112 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Used for SEC-Wave Mill, WGC Model WGC-R

  SUMITOMO ELECTRIC HARDMETAL

  [Features]·The high precision body and inserts enable high-quality machining, providing both sharpness and strength at a high level.·The lineup of products with a reinforced small diameter is suitable for machining small accessories.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Groove / Chamfer	80 ～ 200	general steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum / Titanium	Rough and medium rough processing	-	4 ～ 8	Arbor	-	-	4 ～ 6	-

  From: 9,305,229 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-Wave Mill for WGX Type, WGXF-R(S)

  SUMITOMO ELECTRIC HARDMETAL

  Achieves low resistance with a dedicated chip breaker. For general cutting of steel and cast iron.[Features]・ The high rake chip breaker designed for the WGX type achieves low resistance.・ Achieves an excellent finished surface with improved blade runout accuracy and a unique sweeping blade shape.・ Addition of chamfer suppresses burrs and edge chips.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Groove / Chamfer	50 ～ 250	general steel / Quenched and tempered steel / Stainless Steel / Cast Iron	Rough and medium rough processing	-	5 ～ 24	Arbor	-	-	6	-

  From: 9,983,912 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-Wave Mill for WGX Type, WGXM-R(S)

  SUMITOMO ELECTRIC HARDMETAL

  Achieves low resistance with a dedicated chip breaker. For general cutting of steel and cast iron.[Features]・ The high rake chip breaker designed for the WGX type achieves low resistance.・ Achieves an excellent finished surface with improved blade runout accuracy and a unique sweeping blade shape.・ Addition of chamfer suppresses burrs and edge chips.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Groove / Chamfer	50 ～ 250	general steel / Quenched and tempered steel / Stainless Steel / Cast Iron	Rough and medium rough processing	-	4 ～ 14	Arbor	-	-	6	-

  From: 8,817,561 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-Wave Mill for WGX Type, WGX-R(S)

  SUMITOMO ELECTRIC HARDMETAL

  Achieves low resistance with a dedicated chip breaker. For general cutting of steel and cast iron.[Features]・ The high rake chip breaker designed for the WGX type achieves low resistance.・ Achieves an excellent finished surface with improved blade runout accuracy and a unique sweeping blade shape.・ Addition of chamfer suppresses burrs and edge chips.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Groove / Chamfer	40 ～ 250	general steel / Quenched and tempered steel / Stainless Steel / Cast Iron	Rough and medium rough processing	-	3 ～ 10	Arbor	-	-	6	-

  From: 7,227,280 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Used for SEC-Wave Radius Mill, WRCX Model WRCX-E

  SUMITOMO ELECTRIC HARDMETAL

  A multi-functional cutter that efficiently performs a variety of machining, such as mold engraving, ramping, and helical milling.[Features]・ A highly durable body with special surface treatment significantly improves the lifespan and reliability.・ Resistant to chatter with anti-vibration edge design.・ All sizes have air holes to prevent cutting chip clogging and jamming.・ Insert mounting ensures stable machining with a robust screw clamp that uses Torx cross-head screws.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Groove	40 ～ 50	general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron / Aluminum / Titanium	Rough and medium rough processing	170 ～ 250	2 ～ 3	With handle	32	50	8	-

  From: 8,499,466 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Used for SEC-Wave Radius Mill, WRCX Model WRCXF-RS

  SUMITOMO ELECTRIC HARDMETAL

  This multi-functional cutter performs a variety of machining with high efficiency, such as mold engraving, slope milling, and helical tapping.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Groove	50 ～ 100	general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron / Aluminum / Titanium	Rough and medium rough processing	-	4 ～ 6	Arbor	-	-	6 ～ 8	-

  From: 10,619,906 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Used for SEC-Wave Radius Mill, WRCX Model WRCX-M-Z

  SUMITOMO ELECTRIC HARDMETAL

  This multi-functional cutter performs a variety of machining with high efficiency, such as mold engraving, slope milling, and helical tapping.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Groove	40	general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron / Aluminum / Titanium	Rough and medium rough processing	-	4	Arbor	-	-	6	-

  From: 8,541,957 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Used for SEC-Wave Repeater, WRX Model WRX-E

  SUMITOMO ELECTRIC HARDMETAL

  Optimizes cutting edge placement to realize low resistance and low vibration machining. Smooth chip discharge and high body rigidity are made possible by the lead and special pocket shape.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Side / Groove	40 ～ 50	general steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum / Titanium	Rough and medium rough processing	150 ～ 180	6 ～ 12	With handle	32 ～ 42	60 ～ 75	27 ～ 53	-

  From: 13,800,665 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-Wave Repeater for WRX Type, WRX-R (S)

  SUMITOMO ELECTRIC HARDMETAL

  Optimizes cutting edge placement to realize low resistance and low vibration machining. Smooth chip discharge and high body rigidity are made possible by the lead and special pocket shape.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Side / Groove	50 ～ 100	general steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum / Titanium	Rough and medium rough processing	-	8 ～ 24	Arbor	-	-	27 ～ 53	-

  From: 15,921,105 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-Metal Slash Mill MSX Type MSX-R (S)

  SUMITOMO ELECTRIC HARDMETAL

  Multifunctional cutter which dramatically improves efficiency with diverse tooling, enabling roughing with super-high feed.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Groove	50 ～ 100	general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron	Rough and medium rough processing	-	3 ～ 6	Arbor	-	-	1.5 ～ 2.4	-

  From: 10,195,975 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Used for SEC-Wave Mill, WEX Model WEX-M-Z

  SUMITOMO ELECTRIC HARDMETAL

  Supports various combinations of carbide arbors and steel arbors. Screw mount type enables easy replacement.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Side / Groove	25 ～ 40	general steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum / Titanium	Rough and medium rough processing	56 ～ 63	2 ～ 4	Centering Plug	12.5 ～ 17	35 ～ 40	14	-

  From: 5,340,149 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-Metal Slash Mill (modular type), MSX Model MSX-M-Z

  SUMITOMO ELECTRIC HARDMETAL

  Multifunctional cutter which dramatically improves efficiency with diverse tooling, enabling roughing with super-high feed.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Groove	32 ～ 40	general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron	Rough and medium rough processing	63	2 ～ 3	With handle	17	40	1 ～ 2	-

  From: 7,778,488 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-Wave Mill WAX3000E/EL Type, for chip blade tip nose radius greater than 4.0

  SUMITOMO ELECTRIC HARDMETAL

  High-speed, high-efficiency machining cutter capable of rough machining to finish machining of non-ferrous metals, including aluminum alloy.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Side / Groove	20 ～ 40	Aluminum	Rough and medium rough processing	130 ～ 220	1 ～ 3	With handle	20 ～ 32	60 ～ 70	16 ～ 18	-

  From: 9,135,657 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-Wave Mill WAX3000 Type, for chip blade tip nose radius greater than 4.0

  SUMITOMO ELECTRIC HARDMETAL

  High-speed, high-efficiency machining cutter capable of rough machining to finish machining of non-ferrous metals, including aluminum alloy.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Side / Groove	50 ～ 125	Aluminum	Rough and medium rough processing	-	4 ～ 7	Arbor	-	-	16 ～ 18	-

  From: 15,539,469 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-Wave Mill WAX4000E/EL Type, for chip blade tip nose radius less than 3.2

  SUMITOMO ELECTRIC HARDMETAL

  High-speed, high-efficiency machining cutter capable of rough machining to finish machining of non-ferrous metals, including aluminum alloy.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Side / Groove	25 ～ 40	Aluminum	Rough and medium rough processing	140 ～ 220	1 ～ 2	With handle	25 ～ 32	60 ～ 70	22 ～ 24	-

  From: 10,641,152 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-Wave Mill WAX4000 Type, for chip blade tip nose radius less than 3.2

  SUMITOMO ELECTRIC HARDMETAL

  High-speed, high-efficiency machining cutter capable of rough machining to finish machining of non-ferrous metals, including aluminum alloy.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Side / Groove	50 ～ 125	Aluminum	Rough and medium rough processing	-	2 ～ 6	Arbor	-	-	22 ～ 24	-

  From: 14,839,738 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-Wave Mill WAX4000E/EL Type, for chip blade tip nose radius greater than 4.0

  SUMITOMO ELECTRIC HARDMETAL

  High-speed, high-efficiency machining cutter capable of rough machining to finish machining of non-ferrous metals, including aluminum alloy.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Side / Groove	25 ～ 40	Aluminum	Rough and medium rough processing	140 ～ 220	1 ～ 2	With handle	25 ～ 32	60 ～ 70	22 ～ 24	-

  From: 10,641,152 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-Wave Mill WAX4000 Type, for chip blade tip nose radius greater than 4.0

  SUMITOMO ELECTRIC HARDMETAL

  High-speed, high-efficiency machining cutter capable of rough machining to finish machining of non-ferrous metals, including aluminum alloy.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Side / Groove	50 ～ 125	Aluminum	Rough and medium rough processing	-	2 ～ 6	Arbor	-	-	22 ～ 24	-

  From: 14,839,738 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-Wave Multifunctional, Long Type WMM2000EL

  SUMITOMO ELECTRIC HARDMETAL

  Enables shoulder cutting and groove cutting with a single unit, as well as plunging. Ideal for high efficiency slope milling, helical drilling, and pocket machining.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Side / Groove / Vertical	20 ～ 30	general steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum / Titanium	Rough and medium rough processing	185 ～ 230	3 ～ 5	With handle	20 ～ 25	35 ～ 75	17 ～ 35	-

  From: 6,230,699 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-Wave Multifunctional, Long Type / Air Hole Specification WMM2000ELH

  SUMITOMO ELECTRIC HARDMETAL

  Enables shoulder cutting and groove cutting with a single unit, as well as plunging. Ideal for high efficiency slope milling, helical drilling, and pocket machining.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Side / Groove / Vertical	20 ～ 30	general steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum / Titanium	Rough and medium rough processing	185 ～ 230	3 ～ 5	With handle	20 ～ 25	35 ～ 75	17 ～ 35	-

  From: 8,096,584 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-Wave Multifunctional, Standard Type WMM3000E

  SUMITOMO ELECTRIC HARDMETAL

  Enables shoulder cutting and groove cutting with a single unit, as well as plunging. Ideal for high efficiency slope milling, helical drilling, and pocket machining.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Side / Groove / Vertical	32 ～ 40	general steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum / Titanium	Rough and medium rough processing	150 ～ 160	4	With handle	32	50 ～ 55	39	-

  From: 6,485,057 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-Wave Multifunctional, Long Type WMM3000EL

  SUMITOMO ELECTRIC HARDMETAL

  [Features]・ Enables shoulder milling, grooving, and drilling with a single WMM type.・ Ideal for high efficiency ramping, helical drilling, and pocket machining.・ Use of a wave mill insert achieves both cutting performance and cutting edge strength.・ Reduced cutting force realizes the same cutting chip discharge amount as conventional products with a lower required power.・ One type of insert enables easy tool management.・ Ideal for cutting stainless steel, etc.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Side / Groove / Vertical	32 ～ 40	general steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum / Titanium	Rough and medium rough processing	230 ～ 240	4	With handle	32	50 ～ 90	39	-

  From: 7,036,462 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-Wave Multifunctional, Long Type / Air Hole Specification WMM3000ELH

  SUMITOMO ELECTRIC HARDMETAL

  Enables shoulder cutting and groove cutting with a single unit, as well as plunging. Ideal for high efficiency slope milling, helical drilling, and pocket machining.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Side / Groove / Vertical	32 ～ 40	general steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum / Titanium	Rough and medium rough processing	230 ～ 240	4	With handle	32	50 ～ 90	39	-

  From: 9,156,902 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-Metal Slash Mill (Modular Type) MSX08000M Type

  SUMITOMO ELECTRIC HARDMETAL

  Multifunctional cutter which dramatically improves efficiency with diverse tooling, enabling roughing with super-high feed

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Groove	25 ～ 35	general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron	Rough and medium rough processing	56 ～ 63	2 ～ 3	Centering Plug	-	35 ～ 40	1 ～ 2	-

  From: 7,566,621 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-Sumi Dual Mill, DFC09000R (S) Type (Standard Type)

  SUMITOMO ELECTRIC HARDMETAL

  [Features]・ The unique insert shapes enable excellent sharpness and cutting edge strength, covering a wide range of works from high-efficiency machining to finishing.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Side	-	-	-	-	-	Arbor	-	-	-	-

  From: 9,207,030 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-Sumi Dual Mill, DFCM09000R (S) Type (Fine Pitch)

  SUMITOMO ELECTRIC HARDMETAL

  [Features]· Unique insert shape provides both an excellent cut and blade tip strength, covering a wide range from high-efficiency machining to finishing.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Side	-	-	-	-	5 ～ 12	Arbor	-	-	-	-

  From: 11,292,780 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

BrandNhãn hiệu
Product SeriesDòng sản phẩm
From
Days to ShipSố ngày giao hàng
Machining Application
blade diameter D(φ)
work material
Finish category
Overall length (L)(mm)
Number of flutes(sheet)
Mounting Method
Shank diameter (d)(mm)
Underneck length (ℓ1)(mm)
Maximum Cutting Depth (Ad)(mm)
Compatible Tip Material

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
BrandNhãn hiệu	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL
Product SeriesDòng sản phẩm	Used for SEC-Sumi Dual Mill, DGC Model DGCF-R	Used for SEC-Sumi Dual Mill, DGC Model DGCM-R	Used for SEC-Sumi Dual Mill, DGC Model DGC-R	Used for SEC-Sumi Power Mill, PWC Model PWCF-R	Used for SEC-Sumi Power Mill, PWC Model PWC-R	Used for SEC-Sumi Power Mill, PWS Model PWSF-R	Used for SEC-Sumi Power Mill, PWS Model PWS-R	Used for SEC-Wave Mill, WEX Model WEX-E	Used for SEC-Wave Mill, WFX Model WFX-E	Used for SEC-Wave Mill, WFX Model WFXF-E	Used for SEC-Wave Mill, WFX Model WFXF-R	WFX-R For SEC-Wave Mill WFX Model	Used for SEC-Wave Mill, WGC Model WGC-EW	Used for SEC-Wave Mill, WGX Model WGX-EW	Used for SEC-Sumi Dual, DGC Model DGC-EW	Used for SEC-Wave Mill, WEX Model WEX-F	Used for SEC-Wave Mill, WEX Model WEXF-R	Used for SEC-Wave Mill, WGC Model WGCF-R	Used for SEC-Wave Mill, WGC Model WGC(F)-RS	Used for SEC-Wave Mill, WGC Model WGC-R	SEC-Wave Mill for WGX Type, WGXF-R(S)	SEC-Wave Mill for WGX Type, WGXM-R(S)	SEC-Wave Mill for WGX Type, WGX-R(S)	Used for SEC-Wave Radius Mill, WRCX Model WRCX-E	Used for SEC-Wave Radius Mill, WRCX Model WRCXF-RS	Used for SEC-Wave Radius Mill, WRCX Model WRCX-M-Z	Used for SEC-Wave Repeater, WRX Model WRX-E	SEC-Wave Repeater for WRX Type, WRX-R (S)	SEC-Metal Slash Mill MSX Type MSX-R (S)	Used for SEC-Wave Mill, WEX Model WEX-M-Z	SEC-Metal Slash Mill (modular type), MSX Model MSX-M-Z	SEC-Wave Mill WAX3000E/EL Type, for chip blade tip nose radius greater than 4.0	SEC-Wave Mill WAX3000 Type, for chip blade tip nose radius greater than 4.0	SEC-Wave Mill WAX4000E/EL Type, for chip blade tip nose radius less than 3.2	SEC-Wave Mill WAX4000 Type, for chip blade tip nose radius less than 3.2	SEC-Wave Mill WAX4000E/EL Type, for chip blade tip nose radius greater than 4.0	SEC-Wave Mill WAX4000 Type, for chip blade tip nose radius greater than 4.0	SEC-Wave Multifunctional, Long Type WMM2000EL	SEC-Wave Multifunctional, Long Type / Air Hole Specification WMM2000ELH	SEC-Wave Multifunctional, Standard Type WMM3000E	SEC-Wave Multifunctional, Long Type WMM3000EL	SEC-Wave Multifunctional, Long Type / Air Hole Specification WMM3000ELH	SEC-Metal Slash Mill (Modular Type) MSX08000M Type	SEC-Sumi Dual Mill, DFC09000R (S) Type (Standard Type)	SEC-Sumi Dual Mill, DFCM09000R (S) Type (Fine Pitch)
From	12,740,346 VND-	10,619,906 VND-	8,499,466 VND-	21,980,068 VND-	18,289,019 VND-	20,374,049 VND-	16,981,424 VND-	5,340,149 VND-	9,135,657 VND-	10,619,906 VND-	8,605,497 VND-	7,439,344 VND-	5,318,903 VND-	8,075,535 VND-	9,135,657 VND-	8,117,830 VND-	12,740,346 VND-	15,581,764 VND-	5,870,112 VND-	9,305,229 VND-	9,983,912 VND-	8,817,561 VND-	7,227,280 VND-	8,499,466 VND-	10,619,906 VND-	8,541,957 VND	13,800,665 VND-	15,921,105 VND-	10,195,975 VND-	5,340,149 VND-	7,778,488 VND-	9,135,657 VND-	15,539,469 VND-	10,641,152 VND-	14,839,738 VND-	10,641,152 VND-	14,839,738 VND-	6,230,699 VND-	8,096,584 VND-	6,485,057 VND-	7,036,462 VND-	9,156,902 VND-	7,566,621 VND-	9,207,030 VND-	11,292,780 VND-
Days to ShipSố ngày giao hàng	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	9 Day(s)	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	9 Day(s)	6 Day(s) or more	8 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more
Machining Application	Plane / Groove / Chamfer	Plane / Groove / Chamfer	Plane / Groove / Chamfer	Plane / Side / Groove / Chamfer	Plane / Side / Groove / Chamfer	Plane / Side / Groove	Plane / Side / Groove	Plane / Side / Groove	Plane / Side / Groove	Plane / Side / Groove	Plane / Side / Groove	Plane / Side / Groove	Plane / Groove / Chamfer	Plane / Groove / Chamfer	Plane / Groove / Chamfer	Plane / Side / Groove	Plane / Side / Groove	Plane / Groove / Chamfer	Plane / Groove / Chamfer	Plane / Groove / Chamfer	Plane / Groove / Chamfer	Plane / Groove / Chamfer	Plane / Groove / Chamfer	Plane / Groove	Plane / Groove	Plane / Groove	Plane / Side / Groove	Plane / Side / Groove	Plane / Groove	Plane / Side / Groove	Plane / Groove	Plane / Side / Groove	Plane / Side / Groove	Plane / Side / Groove	Plane / Side / Groove	Plane / Side / Groove	Plane / Side / Groove	Plane / Side / Groove / Vertical	Plane / Side / Groove / Vertical	Plane / Side / Groove / Vertical	Plane / Side / Groove / Vertical	Plane / Side / Groove / Vertical	Plane / Groove	Plane / Side	Plane / Side
blade diameter D(φ)	50 (52.9) ～ 250 (252.9)	50 (52.9) ～ 250 (252.9)	40(42.9) ～ 250 (252.9)	80 ～ 200	80 ～ 200	80 ～ 250	80 ～ 250	25 ～ 63	40 ～ 80	50 ～ 80	50 ～ 200	50 ～ 250	20 ～ 63	32 ～ 63	40 ～ 60	40 ～ 63	80 ～ 125	80 ～ 200	32 ～ 63	80 ～ 200	50 ～ 250	50 ～ 250	40 ～ 250	40 ～ 50	50 ～ 100	40	40 ～ 50	50 ～ 100	50 ～ 100	25 ～ 40	32 ～ 40	20 ～ 40	50 ～ 125	25 ～ 40	50 ～ 125	25 ～ 40	50 ～ 125	20 ～ 30	20 ～ 30	32 ～ 40	32 ～ 40	32 ～ 40	25 ～ 35	-	-
work material	general steel / Quenched and tempered steel / Stainless Steel / Cast Iron	general steel / Quenched and tempered steel / Stainless Steel / Cast Iron	general steel / Quenched and tempered steel / Stainless Steel / Cast Iron	Cast Iron	Cast Iron	general steel / Quenched and tempered steel / Stainless Steel / Cast Iron	general steel / Quenched and tempered steel / Stainless Steel / Cast Iron	general steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum / Titanium	general steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum	general steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum	general steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum	general steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum	general steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum / Titanium	general steel / Quenched and tempered steel / Stainless Steel / Cast Iron	general steel / Quenched and tempered steel / Stainless Steel / Cast Iron	general steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum / Titanium	general steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum / Titanium	general steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum / Titanium	general steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum / Titanium	general steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum / Titanium	general steel / Quenched and tempered steel / Stainless Steel / Cast Iron	general steel / Quenched and tempered steel / Stainless Steel / Cast Iron	general steel / Quenched and tempered steel / Stainless Steel / Cast Iron	general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron / Aluminum / Titanium	general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron / Aluminum / Titanium	general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron / Aluminum / Titanium	general steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum / Titanium	general steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum / Titanium	general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron	general steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum / Titanium	general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron	Aluminum	Aluminum	Aluminum	Aluminum	Aluminum	Aluminum	general steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum / Titanium	general steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum / Titanium	general steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum / Titanium	general steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum / Titanium	general steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum / Titanium	general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron	-	-
Finish category	Rough and medium rough processing	Rough and medium rough processing	Rough and medium rough processing	Rough and medium rough processing	Rough and medium rough processing	Rough and medium rough processing	Rough and medium rough processing	Rough and medium rough processing	Rough and medium rough processing	Rough and medium rough processing	Rough and medium rough processing	Rough and medium rough processing	Rough and medium rough processing	Rough and medium rough processing	Rough and medium rough processing	Rough and medium rough processing	Rough and medium rough processing	Rough and medium rough processing	Rough and medium rough processing	Rough and medium rough processing	Rough and medium rough processing	Rough and medium rough processing	Rough and medium rough processing	Rough and medium rough processing	Rough and medium rough processing	Rough and medium rough processing	Rough and medium rough processing	Rough and medium rough processing	Rough and medium rough processing	Rough and medium rough processing	Rough and medium rough processing	Rough and medium rough processing	Rough and medium rough processing	Rough and medium rough processing	Rough and medium rough processing	Rough and medium rough processing	Rough and medium rough processing	Rough and medium rough processing	Rough and medium rough processing	Rough and medium rough processing	Rough and medium rough processing	Rough and medium rough processing	Rough and medium rough processing	-	-
Overall length (L)(mm)	-	-	-	-	-	-	-	120 ～ 220	120	120	-	-	100 ～ 125	125	125	-	-	-	-	-	-	-	-	170 ～ 250	-	-	150 ～ 180	-	-	56 ～ 63	63	130 ～ 220	-	140 ～ 220	-	140 ～ 220	-	185 ～ 230	185 ～ 230	150 ～ 160	230 ～ 240	230 ～ 240	56 ～ 63	-	-
Number of flutes(sheet)	5 ～ 18	4 ～ 14	3 ～ 10	9 ～ 24	7 ～ 16	6 ～ 14	4 ～ 12	2 ～ 6	3 ～ 4	4 ～ 6	4 ～ 16	3 ～ 12	2 ～ 6	3 ～ 5	3 ～ 4	4 ～ 6	7 ～ 9	8 ～ 20	3 ～ 6	4 ～ 8	5 ～ 24	4 ～ 14	3 ～ 10	2 ～ 3	4 ～ 6	4	6 ～ 12	8 ～ 24	3 ～ 6	2 ～ 4	2 ～ 3	1 ～ 3	4 ～ 7	1 ～ 2	2 ～ 6	1 ～ 2	2 ～ 6	3 ～ 5	3 ～ 5	4	4	4	2 ～ 3	-	5 ～ 12
Mounting Method	Arbor	Arbor	Arbor	Arbor	Arbor	Arbor	Arbor	With handle	With handle	With handle	Arbor	Arbor	With handle	With handle	With handle	Arbor	Arbor	Arbor	Arbor	Arbor	Arbor	Arbor	Arbor	With handle	Arbor	Arbor	With handle	Arbor	Arbor	Centering Plug	With handle	With handle	Arbor	With handle	Arbor	With handle	Arbor	With handle	With handle	With handle	With handle	With handle	Centering Plug	Arbor	Arbor
Shank diameter (d)(mm)	-	-	-	-	-	-	-	20 ～ 42	32	32	-	-	20 ～ 32	32	32	-	-	-	-	-	-	-	-	32	-	-	32 ～ 42	-	-	12.5 ～ 17	17	20 ～ 32	-	25 ～ 32	-	25 ～ 32	-	20 ～ 25	20 ～ 25	32	32	32	-	-	-
Underneck length (ℓ1)(mm)	-	-	-	-	-	-	-	25 ～ 80	30	30	-	-	40	40	40	-	-	-	-	-	-	-	-	50	-	-	60 ～ 75	-	-	35 ～ 40	40	60 ～ 70	-	60 ～ 70	-	60 ～ 70	-	35 ～ 75	35 ～ 75	50 ～ 55	50 ～ 90	50 ～ 90	35 ～ 40	-	-
Maximum Cutting Depth (Ad)(mm)	6 (SNMT/SNET Tip) / 3 (ONMT/ONET Tip)	6 (SNMT/SNET Tip) / 3 (ONMT/ONET Tip)	6 (SNMT/SNET Tip) / 3 (ONMT/ONET Tip)	15	15	16	16	14	10	10	10	10	4 ～ 6	6	3 ～ 6	14	14	6	4 ～ 6	4 ～ 6	6	6	6	8	6 ～ 8	6	27 ～ 53	27 ～ 53	1.5 ～ 2.4	14	1 ～ 2	16 ～ 18	16 ～ 18	22 ～ 24	22 ～ 24	22 ～ 24	22 ～ 24	17 ～ 35	17 ～ 35	39	39	39	1 ～ 2	-	-
Compatible Tip Material	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-

Loading...Tải…