NS TOOL Carbide Taper End Mills

• You can add up to 6 items per a category to the compare list. Compare

  

  MTE230 MUGEN-COATING Tapered End Mill

  NS TOOL

  [Features]・ MUGEN coating allows long taper machining lifespan.・ Available in series with sizes of ø0.2 to ø10 and one angle of 30' to 20° (ø6 or less).

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  0.5 ～ 20	0.2 ～ 10	Tapered square	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎]	0.8 ～ 35	-	2	4 ～ 20	45 ～ 100	TiAlN

  From: 1,463,003 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MRBTNH230 MUGEN COATING Premium 2-Flute Long Tapered Neck Ball End Mill

  NS TOOL

  [Features]・ A newly designed tapered neck shape that enhances tool rigidity and an infinite coating premium that is ideal for direct engraving of high hardness materials are adopted. With these synergistic effects, deep cutting of highly accuracy and highly efficient hard materials is realized.・ Tapered neck shape ball end mill that can achieve high accuracy by machining deep parts.・ By adopting the ideal taper neck shape and MUGEN coating premium, it demonstrates its true value when processing high hardness materials.

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  0.5 ～ 2	-	Taper ball	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○] / Aluminum[○] / Titanium[◎] / Copper[○] / Resin[○]	0.15 ～ 3	0.1 ～ 2	2	4 ～ 6	50 ～ 110	TiAlN

  From: 997,254 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MTB230 MUGEN-COATING Tapered Ball End Mill

  NS TOOL

  [Features]・ Taper machining and ball machining are possible at the same time.・ The size ranges from a minimum of R0.1 to a maximum of one angle of 15°.

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  1 ～ 15	-	Taper ball	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Copper[◎] / Resin[◎]	1 ～ 16	0.1 ～ 2	2	4 ～ 10	50 ～ 70	TiAlN

  From: 2,293,946 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Taper Ball End Mill

  NS TOOL

  [Work Material]○: Carbon steel, steel alloy/tool steel, heat-treated steel, stainless steel◎; copper, aluminum alloy, resin

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  0.5 ～ 10	-	Taper ball	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Aluminum[◎] / Copper[◎] / Resin[◎]	10 ～ 35	0.5 ～ 3	2	4 ～ 16	50 ～ 100	Non-Coated

  From: 2,845,548 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  NER-2 Trapezoidal Runner End Mill

  NS TOOL

  [Work Material]○: Carbon steel, steel alloy/tool steel, heat-treated steel, stainless steel, resin◎; copper, aluminum alloy

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  7 ～ 15	2 ～ 6	Tapered square	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[◎] / Copper[◎] / Resin[◎]	5 ～ 12	-	2	4 ～ 12	45 ～ 75	Non-Coated

  From: 2,470,994 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Tapered Long Blade End Mill NTEL-4

  NS TOOL

  [Work Material]○: Carbon steel, steel alloy/tool steel, heat-treated steel, stainless steel, resin◎: Aluminum alloy, copper

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  0.5 ～ 2.5	3 ～ 6	Tapered square	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Aluminum[◎] / Copper[◎] / Resin[○]	20 ～ 35	-	4	6 ～ 10	60 ～ 85	Non-Coated

  From: 2,970,465 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Taper Long End Mill for Copper Electrode / Aluminum / Plastic DTEL

  NS TOOL

  Adopts a dedicated flute shape and dedicated carbide to maintain sharp cutting edge. A higher-grade finishing surface precision can be obtained.

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  0.5 ～ 5	1 ～ 8	Tapered square	Aluminum[◎] / Copper[◎] / Resin[◎]	8 ～ 64	-	2	4 ～ 20	50 ～ 130	Non-Coated

  From: 2,824,696 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide Tapered End Mill NTE-2

  NS TOOL

  [Work Material]○: Carbon steel, steel alloy/tool steel, heat-treated steel, stainless steel, copper◎: aluminum alloy, resin

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  0.5 ～ 20	0.5 ～ 3	Tapered square	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Aluminum[◎] / Copper[◎] / Resin[◎]	2 ～ 10	-	2	3 ～ 10	35 ～ 70	Non-Coated

  From: 2,033,883 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Tapered Long Blade End Mill NTEL-2

  NS TOOL

  [Work Material]○: Carbon steel, steel alloy/tool steel, heat-treated steel, stainless steel, resin◎; copper, aluminum alloy

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  0.5 ～ 20	1 ～ 3	Tapered square	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Aluminum[◎] / Copper[◎] / Resin[◎]	10 ～ 20	-	2	4 ～ 16	45 ～ 100	Non-Coated

  From: 2,637,419 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MRT425 MUGEN-COATING Tapered End Mill for Deep Ribbing

  NS TOOL

  NS's original high stiffness design enables high-precision and high-efficiency machining.[Work Material]○: Heat-treated steel, hardening steel (Up to 55 HRC), stainless steel, titanium alloy, aluminum alloy, resin◎: Carbon steel, steel alloy/tool steel, copper

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  0.25 ～ 3	0.2 ～ 3	Tapered square	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎]	2 ～ 40	-	4	3 ～ 6	40 ～ 80	TiAlN

  From: 1,444,905 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide Tapered End Mill NTE-4

  NS TOOL

  [Work Material]○: Carbon steel, steel alloy/tool steel, heat-treated steel, stainless steel, resin◎: Aluminum alloy, copper

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  0.5 ～ 15	3 ～ 10	Tapered square	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Aluminum[◎] / Copper[◎] / Resin[○]	10 ～ 35	-	4	6 ～ 10	50 ～ 85	Non-Coated

  From: 2,117,096 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  X Coated Taper End Mill NTE-2X

  NS TOOL

  [Work Material]○: Stainless steel, aluminum alloy, copper, resin◎: Carbon steel, steel alloy/tool steel, heat-treated steel

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  0.5 ～ 1.5	0.5 ～ 2.5	Tapered square	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Aluminum[○] / Copper[○]	2 ～ 4	-	2	3 ～ 4	35 ～ 45	TiCN

  From: 2,491,846 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  X Coated Taper End Mill NTE-4X

  NS TOOL

  [Work Material]○: Stainless steel, aluminum alloy, copper, resin◎: Carbon steel, steel alloy/tool steel, heat-treated steel

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  0.5 ～ 5	3 ～ 10	Tapered square	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Aluminum[○] / Copper[○]	10 ～ 35	-	4	6 ～ 10	50 ～ 85	TiCN

  From: 2,533,354 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Tapered Medium Blade End Mill NTEM-2

  NS TOOL

  [Work Material]○: Carbon steel, steel alloy/tool steel, heat-treated steel, stainless steel, resin◎: Aluminum alloy, copper

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  0.5 ～ 20	1 ～ 4	Tapered square	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Aluminum[◎] / Copper[◎] / Resin[◎]	5 ～ 20	-	2	4 ～ 16	50 ～ 90	Non-Coated

  From: 2,221,160 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  X Coated Taper Medium Blade End Mill NTEM-2X

  NS TOOL

  Medium type taper end mill.Tool material, Ultrafine grain cemented carbideHelix angle, 30°Surface treatment, X coatingNo. of Flutes: 2Machining applications: Grooving, side milling

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  0.5 ～ 15	0.5 ～ 6	Tapered square	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Aluminum[○] / Copper[○]	4 ～ 30	-	2	3 ～ 16	35 ～ 90	Non-Coated

  From: 2,845,548 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MUGEN-COATING PREMIUM 3-Flute Long Tapered Neck Ball End Mill MRBTNH345

  NS TOOL

  [Features]・ The lower neck is tapered to improve rigidity over the conventional long neck type.・ MUGEN Coating Premium, which has excellent heat resistance, is adopted, and it has a long lifespan even when machining hard materials.・ High efficiency machining is possible by adopting original 3 flute shape.

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  0.5 ～ 2	-	Taper ball	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○] / Aluminum[○] / Titanium[◎] / Copper[○] / Resin[○]	0.75 ～ 4.5	0.5 ～ 2	3	6	60 ～ 110	For High Hardness (Silicon Group)

  From: 1,372,709 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MUGEN-COATING Extra Long Tapered Neck Ball End Mill MRBTN230L

  NS TOOL

  The lower neck is tapered to improve tool rigidity. The depth of cut can be increased compared to conventional products.

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  0.5 ～ 5	-	Taper ball	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎]	0.2 ～ 10	0.1 ～ 5	2	4 ～ 12	50 ～ 140	TiAlN

  From: 2,325,225 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Taper End Mill for Copper Electrode / Aluminum / Plastic DTE

  NS TOOL

  Special blade shape and carbide maintain high sharpness for a long period of time. Produces a higher grade finished surface accuracy

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  0.5 ～ 1.5	1 ～ 10	Tapered square	Aluminum[◎] / Copper[◎] / Resin[◎]	4 ～ 35	-	2	4 ～ 10	45 ～ 85	Non-Coated

  From: 1,971,523 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SSPBTN220 CBN Super Spiral Long Taper Neck Ball End Mill

  NS TOOL

  [Features]· CBN long neck ball end mill with a taper neck shape for increased rigidity. · Both efficiency and accuracy are improved by a deep milled finish due to the spiral ball shape with improved sharpness.

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  0.5 ～ 2	0.2 ～ 2	Taper ball	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎]	0.15 ～ 1.2	0.1 ～ 1	2	4	50 ～ 53	Non-Coated

  From: 5,723,409 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  NERB-2 2-Flute Taper Ball End Mill For Runner

  NS TOOL

  Tapered ball end mill suitable for carbon steel to heat-treated steel.Tool material, Ultrafine grain cemented carbideHelix angle, 30°No. of Flutes: 2Machining Applications: Side Machining, Grooving, Curved Surface Machining

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  10 ～ 20	-	Taper ball	general steel[○] / Quenched and tempered steel[◎] / Stainless Steel[○] / Aluminum[◎] / Copper[◎] / Resin[◎]	4 ～ 12	1 ～ 3	2	4 ～ 12	50 ～ 90	Non-Coated

  From: 3,291,226 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  NTER-2X X-Coating Taper Radius End Mill

  NS TOOL

  Tapered radius end mill suitable for 56 HRC or less.Tool material, Ultrafine grain cemented carbideHelix angle, 30°Surface treatment, X coatingNo. of Flutes: 2Machining applications: Flat surface machining, side machining, groovingcorner shape: radius

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  0.5 ～ 10	1 ～ 6	Tapered radius	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Aluminum[○] / Copper[○]	4 ～ 20	0.2 ～ 2	2	4 ～ 12	45 ～ 80	TiCN

  From: 2,916,144 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

BrandNhãn hiệu
Product SeriesDòng sản phẩm
From
Days to ShipSố ngày giao hàng
Single corner (θ)(Degree)
Tip diameter (D)(φ)
Type
work material
Blade length (l)(mm)
R Size(mm)
Number of flutes(sheet)
Shank diameter (d)(mm)
Overall Length (L)(mm)
Coating

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
BrandNhãn hiệu	NS TOOL	NS TOOL	NS TOOL	NS TOOL	NS TOOL	NS TOOL	NS TOOL	NS TOOL	NS TOOL	NS TOOL	NS TOOL	NS TOOL	NS TOOL	NS TOOL	NS TOOL	NS TOOL	NS TOOL	NS TOOL	NS TOOL	NS TOOL	NS TOOL
Product SeriesDòng sản phẩm	MTE230 MUGEN-COATING Tapered End Mill	MRBTNH230 MUGEN COATING Premium 2-Flute Long Tapered Neck Ball End Mill	MTB230 MUGEN-COATING Tapered Ball End Mill	Taper Ball End Mill	NER-2 Trapezoidal Runner End Mill	Tapered Long Blade End Mill NTEL-4	Taper Long End Mill for Copper Electrode / Aluminum / Plastic DTEL	Carbide Tapered End Mill NTE-2	Tapered Long Blade End Mill NTEL-2	MRT425 MUGEN-COATING Tapered End Mill for Deep Ribbing	Carbide Tapered End Mill NTE-4	X Coated Taper End Mill NTE-2X	X Coated Taper End Mill NTE-4X	Tapered Medium Blade End Mill NTEM-2	X Coated Taper Medium Blade End Mill NTEM-2X	MUGEN-COATING PREMIUM 3-Flute Long Tapered Neck Ball End Mill MRBTNH345	MUGEN-COATING Extra Long Tapered Neck Ball End Mill MRBTN230L	Taper End Mill for Copper Electrode / Aluminum / Plastic DTE	SSPBTN220 CBN Super Spiral Long Taper Neck Ball End Mill	NERB-2 2-Flute Taper Ball End Mill For Runner	NTER-2X X-Coating Taper Radius End Mill
From	1,463,003 VND-	997,254 VND-	2,293,946 VND-	2,845,548 VND-	2,470,994 VND-	2,970,465 VND-	2,824,696 VND-	2,033,883 VND-	2,637,419 VND-	1,444,905 VND-	2,117,096 VND-	2,491,846 VND-	2,533,354 VND-	2,221,160 VND-	2,845,548 VND-	1,372,709 VND-	2,325,225 VND-	1,971,523 VND-	5,723,409 VND-	3,291,226 VND-	2,916,144 VND-
Days to ShipSố ngày giao hàng	6 Day(s) or more	6 Day(s) or more	8 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more
Single corner (θ)(Degree)	0.5 ～ 20	0.5 ～ 2	1 ～ 15	0.5 ～ 10	7 ～ 15	0.5 ～ 2.5	0.5 ～ 5	0.5 ～ 20	0.5 ～ 20	0.25 ～ 3	0.5 ～ 15	0.5 ～ 1.5	0.5 ～ 5	0.5 ～ 20	0.5 ～ 15	0.5 ～ 2	0.5 ～ 5	0.5 ～ 1.5	0.5 ～ 2	10 ～ 20	0.5 ～ 10
Tip diameter (D)(φ)	0.2 ～ 10	-	-	-	2 ～ 6	3 ～ 6	1 ～ 8	0.5 ～ 3	1 ～ 3	0.2 ～ 3	3 ～ 10	0.5 ～ 2.5	3 ～ 10	1 ～ 4	0.5 ～ 6	-	-	1 ～ 10	0.2 ～ 2	-	1 ～ 6
Type	Tapered square	Taper ball	Taper ball	Taper ball	Tapered square	Tapered square	Tapered square	Tapered square	Tapered square	Tapered square	Tapered square	Tapered square	Tapered square	Tapered square	Tapered square	Taper ball	Taper ball	Tapered square	Taper ball	Taper ball	Tapered radius
work material	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎]	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○] / Aluminum[○] / Titanium[◎] / Copper[○] / Resin[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Copper[◎] / Resin[◎]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Aluminum[◎] / Copper[◎] / Resin[◎]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[◎] / Copper[◎] / Resin[◎]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Aluminum[◎] / Copper[◎] / Resin[○]	Aluminum[◎] / Copper[◎] / Resin[◎]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Aluminum[◎] / Copper[◎] / Resin[◎]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Aluminum[◎] / Copper[◎] / Resin[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Aluminum[◎] / Copper[◎] / Resin[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Aluminum[◎] / Copper[◎] / Resin[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○] / Aluminum[○] / Titanium[◎] / Copper[○] / Resin[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎]	Aluminum[◎] / Copper[◎] / Resin[◎]	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎]	general steel[○] / Quenched and tempered steel[◎] / Stainless Steel[○] / Aluminum[◎] / Copper[◎] / Resin[◎]	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Aluminum[○] / Copper[○]
Blade length (l)(mm)	0.8 ～ 35	0.15 ～ 3	1 ～ 16	10 ～ 35	5 ～ 12	20 ～ 35	8 ～ 64	2 ～ 10	10 ～ 20	2 ～ 40	10 ～ 35	2 ～ 4	10 ～ 35	5 ～ 20	4 ～ 30	0.75 ～ 4.5	0.2 ～ 10	4 ～ 35	0.15 ～ 1.2	4 ～ 12	4 ～ 20
R Size(mm)	-	0.1 ～ 2	0.1 ～ 2	0.5 ～ 3	-	-	-	-	-	-	-	-	-	-	-	0.5 ～ 2	0.1 ～ 5	-	0.1 ～ 1	1 ～ 3	0.2 ～ 2
Number of flutes(sheet)	2	2	2	2	2	4	2	2	2	4	4	2	4	2	2	3	2	2	2	2	2
Shank diameter (d)(mm)	4 ～ 20	4 ～ 6	4 ～ 10	4 ～ 16	4 ～ 12	6 ～ 10	4 ～ 20	3 ～ 10	4 ～ 16	3 ～ 6	6 ～ 10	3 ～ 4	6 ～ 10	4 ～ 16	3 ～ 16	6	4 ～ 12	4 ～ 10	4	4 ～ 12	4 ～ 12
Overall Length (L)(mm)	45 ～ 100	50 ～ 110	50 ～ 70	50 ～ 100	45 ～ 75	60 ～ 85	50 ～ 130	35 ～ 70	45 ～ 100	40 ～ 80	50 ～ 85	35 ～ 45	50 ～ 85	50 ～ 90	35 ～ 90	60 ～ 110	50 ～ 140	45 ～ 85	50 ～ 53	50 ～ 90	45 ～ 80
Coating	TiAlN	TiAlN	TiAlN	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	TiAlN	Non-Coated	TiCN	TiCN	Non-Coated	Non-Coated	For High Hardness (Silicon Group)	TiAlN	Non-Coated	Non-Coated	Non-Coated	TiCN

Loading...Tải…