Electric Screwdrivers（Start Method：Lever Start Type）

• You can add up to 6 items per a category to the compare list. Compare

  

  Vessel USB Rechargeable Screwdriver

  VESSEL

  [Features]· Electric power for quick tightening and Manual for final tightening. · With High Brightness LED light. · Built in USB Recharge Li-ion Battery (3.6V-800mAh). · 6.35mm HEX shank. · [Use] · For electrical / equipment work, panel assembly, equipment / equipment maintenance, automobile / motorcycle maintenance, DIY, etc.

  Output torque(N▪m)	Product Type	Power Supply(V)	Compatible Screw: Small Screw(mm)	Cord Length(m)	Start Method	Compatible Screw: Tapping Screw(mm)	Rotation Speed(min⁻¹)	Power Consumption(W)	Overall Length(mm)
  2	-	5	-	-	Lever Start Type	-	280	-	140

  From: 1,065,667 VND
  Days to Ship: Số ngày giao hàng: Same day

  Same day

• You can add up to 6 items per a category to the compare list. Compare

  

  Vessel Electric Driver 220USBP1

  VESSEL

  [Features]· The rotation speed and torque can be switched in 3 steps according to the application. · Reinforced gear and housing increase strength by 20%. · Uses USB Type-C, which allows you to connect to the charging port without hesitation because there is no directionality of the terminal. · [Use] · For electronic terminal block work, distribution board terminal work, tightening light ceiling screws and long screws, etc.

  Output torque(N▪m)	Product Type	Power Supply(V)	Compatible Screw: Small Screw(mm)	Cord Length(m)	Start Method	Compatible Screw: Tapping Screw(mm)	Rotation Speed(min⁻¹)	Power Consumption(W)	Overall Length(mm)
  1.2, 1.6, 2.0	-	-	-	-	Lever Start Type	-	280, 340, 400	-	147

  From: 1,394,000 VND
  Days to Ship: Số ngày giao hàng: Same day

  Same day

• You can add up to 6 items per a category to the compare list. Compare

  

  Vessel Rechargeable Ballgrip S / D Hi-Seed 220USB-S1

  VESSEL

  [Features]·No-load rotation speed 1200 rpm. · Easy charging with USB. · High-brightness LED light (lights up for 5 seconds after use). · [Use] · For switchboard assembly and mounting of fittings and exterior parts.

  Output torque(N▪m)	Product Type	Power Supply(V)	Compatible Screw: Small Screw(mm)	Cord Length(m)	Start Method	Compatible Screw: Tapping Screw(mm)	Rotation Speed(min⁻¹)	Power Consumption(W)	Overall Length(mm)
  0.4	-	-	-	-	Lever Start Type	-	1200	-	140

  From: 1,225,334 VND
  Days to Ship: Số ngày giao hàng: Same day

  Same day

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  AC Transformer-less Type Electric Screwdriver HFA-6000 series

  KILEWS

  [Features]· Very easy to move and install with no controller required.· Equipped with a soft grip, which reduces fatigue during continuous work for long hours.

  Output torque(N▪m)	Product Type	Power Supply(V)	Compatible Screw: Small Screw(mm)	Cord Length(m)	Start Method	Compatible Screw: Tapping Screw(mm)	Rotation Speed(min⁻¹)	Power Consumption(W)	Overall Length(mm)
  0.20～1.18 ～ 0.30～1.86	-	-	1.6~3.0 ～ 2.6～4.0	-	Lever Start Type	1.6 to 2.6 ～ 2.6~3.0	-	38	242

  From: 7,673,990 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Cushion Latch Type Electric Screwdriver HS-200 Series

  KILEWS

  [Features]· Clutch starts idling when reaching set torque value.· Motor stops when the lever is released.· Electric powered so it does not suffer the same torque variation that occur due to changes in air pressure, and the torque accuracy is far better than that of general air screwdrivers.

  Output torque(N▪m)	Product Type	Power Supply(V)	Compatible Screw: Small Screw(mm)	Cord Length(m)	Start Method	Compatible Screw: Tapping Screw(mm)	Rotation Speed(min⁻¹)	Power Consumption(W)	Overall Length(mm)
  0.20～1.47 ～ 0.98～3.43	-	-	2.0–4.0 ～ 3.0~5.0	-	Lever Start Type	2.0~3.0 ～ 3.0–4.0	-	30 ～ 45	230 ～ 264

  From: 4,384,453 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Low Voltage DC Type Brushless Electric Screwdriver BN-200 Series

  KILEWS

  [Features]· Realizes significantly improved durability over conventional models. Economical, long lifespan.· Soft grip reduces the feeling of fatigue.· There is no need to replace the carbon brush.

  Output torque(N▪m)	Product Type	Power Supply(V)	Compatible Screw: Small Screw(mm)	Cord Length(m)	Start Method	Compatible Screw: Tapping Screw(mm)	Rotation Speed(min⁻¹)	Power Consumption(W)	Overall Length(mm)
  0.05~0.69	-	-	1.4～2.6	-	Lever Start Type	1.4–2.3	-	25	182

  From: 9,051,361 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  [Kanon] 9K-131 Series Electric Screwdriver

  NAKAMURASEISAKU

  [Features]· Medium torque type featuring a balance between compactness and high power.

  Output torque(N▪m)	Product Type	Power Supply(V)	Compatible Screw: Small Screw(mm)	Cord Length(m)	Start Method	Compatible Screw: Tapping Screw(mm)	Rotation Speed(min⁻¹)	Power Consumption(W)	Overall Length(mm)
  0.4 to 1.5 ～ 0.5 to 2	-	AC100V 50/60Hz	2.0 to 3.5 ～ 2.6 to 4.0	3	Lever Start Type	2.0 to 3.0 ～ 2.0 to 3.5	1000 ～ 2000	35	-

  From: 16,145,972 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  AC Transformer-less Type Electric Screwdriver HFA-9000 Series

  KILEWS

  Electric screwdriver with superior torque precision and easy setting and moving. [Features]· Movement and setting can be easily done without the need for a controller. Combined with a soft grip for reducing fatigue during long hours of work.· A high-powered type with a high-output motor. Push-start and lever-start types available.· Torque fixing ring included as standard. [Applications]· Can be used for work with tapping screws.· Ideal for tightening small screws from M3 to M5.

  Output torque(N▪m)	Product Type	Power Supply(V)	Compatible Screw: Small Screw(mm)	Cord Length(m)	Start Method	Compatible Screw: Tapping Screw(mm)	Rotation Speed(min⁻¹)	Power Consumption(W)	Overall Length(mm)
  0.98～2.94 ～ 1.47～4.41	-	-	3.0~5.0 ～ 4.0–6.0	-	Lever Start Type	3.0–4.0 ～ 4.0–5.0	-	48	269

  From: 8,443,420 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Brushless Electric Screwdriver BLG Series (DC Type ) Lever-Start Type

  HIOS

  [Features]· Performance, quality and durability that are in line with a conventional brushless (BL type), with improved maintainability.· A smooth, cost effective transition can be made from a screwdriver with a brush (CL, α type) to brushless (BLG type).

  Output torque(N▪m)	Product Type	Power Supply(V)	Compatible Screw: Small Screw(mm)	Cord Length(m)	Start Method	Compatible Screw: Tapping Screw(mm)	Rotation Speed(min⁻¹)	Power Consumption(W)	Overall Length(mm)
  0.1 to 0.55	-	-	1.4 to 2.6	1.5	Lever Start Type	1.4 to 2.3	High: 1,000, Low: 690	-	206

  From: 9,519,807 VND
  Days to Ship: Số ngày giao hàng: 14 Day(s) or more

  14 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Electric Screwdriver, Ultra-High Torque RBK Series

  KILEWS

  [Features] · Single-action fastening for improved workability. · Powerful brushless motor and clutch-type torque control for improved work efficiency. · Stable and accurate torque repeatability. · Unique clutch mechanism provides stable torque precision that far surpasses pneumatic screwdrivers to contribute to your torque management. · Easy to set up. · Facilities such as piping are not required, simply use as is as long as you have a power source. · Does not generate oil mist because it is electric. · Since no carbon brush replacement is required and also the non-contact switch is free from contact deterioration, maintenance labor is minimized. · Reduced environmental impact · Low power consumption. Quiet design. Contributes to reducing CO2 emissions. · Can be used safely due to the low-voltage specification.

  Output torque(N▪m)	Product Type	Power Supply(V)	Compatible Screw: Small Screw(mm)	Cord Length(m)	Start Method	Compatible Screw: Tapping Screw(mm)	Rotation Speed(min⁻¹)	Power Consumption(W)	Overall Length(mm)
  6 to 18	-	-	≤ 10.0	-	Lever Start Type	≦ 8.0	370	200	298

  From: 22,543,085 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  [Kanon] KD Series Electric Screwdriver

  NAKAMURASEISAKU

  [Features]· Small size and easy-grip specification due to the 29.5 mm grip diameter. (2KD series)· It does not generate heat even if continuously used, thanks to the adoption of a high-performance motor and air conditioning inside the uniquely developed driver.

  Output torque(N▪m)	Product Type	Power Supply(V)	Compatible Screw: Small Screw(mm)	Cord Length(m)	Start Method	Compatible Screw: Tapping Screw(mm)	Rotation Speed(min⁻¹)	Power Consumption(W)	Overall Length(mm)
  0.02 to 0.35 ～ 0.3 to 1.6	-	AC100V 50/60Hz	1.0 to 2.3 ～ 2.3 to 3.5	3	Lever Start Type	1.0 to 2.0 ～ 2.3 to 3.0	Hi：670、Lo：470 ～ Hi：1000、Lo：700	-	-

  From: 17,312,894 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  

  

  

  

  

  

  

  

  

  

  

  

  

  

  Electric Screwdriver (Lever Start Type Push Start Type)

  VESSEL

  Includes an impact-absorbing gel pad: an electric screwdriver for commercial factories that can be gripped firmly.[Features]· A slotless brushless motor adopted.· There is little recoil when the motor is started.· Improves usability, tightening accuracy, and maintainability.· Ergonomic design for easy holding and reduced fatigue.· Includes a tamper-proof sleeve that prevents accidental operation after adjustments.· Uses non-contact type magnet switch to reduce wear and damage of parts.[Applications]· For production plants.

  Output torque(N▪m)	Product Type	Power Supply(V)	Compatible Screw: Small Screw(mm)	Cord Length(m)	Start Method	Compatible Screw: Tapping Screw(mm)	Rotation Speed(min⁻¹)	Power Consumption(W)	Overall Length(mm)
  0.15~1.0 ～ 0.4～1.8	-	DC32	M1.6-3.0 ～ M2.3-3.0	2	Lever Start Type	1.6-2.6 ～ 2.3-3.0	HI:1000/LO:700 ～ HI: 2000 (LO has no setting)	25 ～ 55	222 ～ 250

  From: 13,291,280 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Ultra-high Torque Electric Screwdriver TBN Series

  KILEWS

  [Features]· Improves workability with one shot tightening. The powerful brushless motor and clutch type torque control improve work efficiency.· Unique clutch structure makes the torque accuracy vastly more stable than that of an air driver.

  Output torque(N▪m)	Product Type	Power Supply(V)	Compatible Screw: Small Screw(mm)	Cord Length(m)	Start Method	Compatible Screw: Tapping Screw(mm)	Rotation Speed(min⁻¹)	Power Consumption(W)	Overall Length(mm)
  3–9 ～ 6 to 18	-	-	5.0～6.0 ～ ≦10.0	-	Lever Start Type	≦4.5 ～ ≦8.0	-	120 ～ 200	274×160

  From: 17,844,950 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

BrandNhãn hiệu
Product SeriesDòng sản phẩm
From
Days to ShipSố ngày giao hàng
Output torque(N▪m)
Product Type
Power Supply(V)
Compatible Screw: Small Screw(mm)
Cord Length(m)
Start Method
Compatible Screw: Tapping Screw(mm)
Rotation Speed(min⁻¹)
Power Consumption(W)
Overall Length(mm)

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
BrandNhãn hiệu	VESSEL	VESSEL	VESSEL	KILEWS	KILEWS	KILEWS	NAKAMURASEISAKU	KILEWS	HIOS	KILEWS	NAKAMURASEISAKU	VESSEL	KILEWS
Product SeriesDòng sản phẩm	Vessel USB Rechargeable Screwdriver	Vessel Electric Driver 220USBP1	Vessel Rechargeable Ballgrip S / D Hi-Seed 220USB-S1	AC Transformer-less Type Electric Screwdriver HFA-6000 series	Cushion Latch Type Electric Screwdriver HS-200 Series	Low Voltage DC Type Brushless Electric Screwdriver BN-200 Series	[Kanon] 9K-131 Series Electric Screwdriver	AC Transformer-less Type Electric Screwdriver HFA-9000 Series	Brushless Electric Screwdriver BLG Series (DC Type ) Lever-Start Type	Electric Screwdriver, Ultra-High Torque RBK Series	[Kanon] KD Series Electric Screwdriver	Electric Screwdriver (Lever Start Type Push Start Type)	Ultra-high Torque Electric Screwdriver TBN Series
From	1,065,667 VND	1,394,000 VND	1,225,334 VND	7,673,990 VND	4,384,453 VND	9,051,361 VND	16,145,972 VND	8,443,420 VND	9,519,807 VND	22,543,085 VND	17,312,894 VND	13,291,280 VND	17,844,950 VND
Days to ShipSố ngày giao hàng	Same day	Same day	Same day	8 Day(s) or more	4 Day(s) or more	9 Day(s) or more	9 Day(s) or more	8 Day(s) or more	14 Day(s) or more	9 Day(s) or more	9 Day(s)	9 Day(s)	7 Day(s) or more
Output torque(N▪m)	2	1.2, 1.6, 2.0	0.4	0.20～1.18 ～ 0.30～1.86	0.20～1.47 ～ 0.98～3.43	0.05~0.69	0.4 to 1.5 ～ 0.5 to 2	0.98～2.94 ～ 1.47～4.41	0.1 to 0.55	6 to 18	0.02 to 0.35 ～ 0.3 to 1.6	0.15~1.0 ～ 0.4～1.8	3–9 ～ 6 to 18
Product Type	-	-	-	-	-	-	-	-	-	-	-	-	-
Power Supply(V)	5	-	-	-	-	-	AC100V 50/60Hz	-	-	-	AC100V 50/60Hz	DC32	-
Compatible Screw: Small Screw(mm)	-	-	-	1.6~3.0 ～ 2.6～4.0	2.0–4.0 ～ 3.0~5.0	1.4～2.6	2.0 to 3.5 ～ 2.6 to 4.0	3.0~5.0 ～ 4.0–6.0	1.4 to 2.6	≤ 10.0	1.0 to 2.3 ～ 2.3 to 3.5	M1.6-3.0 ～ M2.3-3.0	5.0～6.0 ～ ≦10.0
Cord Length(m)	-	-	-	-	-	-	3	-	1.5	-	3	2	-
Start Method	Lever Start Type	Lever Start Type	Lever Start Type	Lever Start Type	Lever Start Type	Lever Start Type	Lever Start Type	Lever Start Type	Lever Start Type	Lever Start Type	Lever Start Type	Lever Start Type	Lever Start Type
Compatible Screw: Tapping Screw(mm)	-	-	-	1.6 to 2.6 ～ 2.6~3.0	2.0~3.0 ～ 3.0–4.0	1.4–2.3	2.0 to 3.0 ～ 2.0 to 3.5	3.0–4.0 ～ 4.0–5.0	1.4 to 2.3	≦ 8.0	1.0 to 2.0 ～ 2.3 to 3.0	1.6-2.6 ～ 2.3-3.0	≦4.5 ～ ≦8.0
Rotation Speed(min⁻¹)	280	280, 340, 400	1200	-	-	-	1000 ～ 2000	-	High: 1,000, Low: 690	370	Hi：670、Lo：470 ～ Hi：1000、Lo：700	HI:1000/LO:700 ～ HI: 2000 (LO has no setting)	-
Power Consumption(W)	-	-	-	38	30 ～ 45	25	35	48	-	200	-	25 ～ 55	120 ～ 200
Overall Length(mm)	140	147	140	242	230 ～ 264	182	-	269	206	298	-	222 ～ 250	274×160

Loading...Tải…