Vehicle Maintenance Tools（Product Type：Generic Tool Page2）

• You can add up to 6 items per a category to the compare list. Compare

  

  Snap Ring Pliers AS403A

  KTC(KYOTO TOOL)

  [Applications]· Use these pliers to remove (attach) snap rings that do not have a hooking hole. [Scope]· Normal type of snap ring with no hooking holes.· Thin claw tip is compatible even with rings having a narrow opening. · This tool is dedicated for snap rings that have a narrow opening and angled notches and are used in Honda vehicles· Claws are replaceable in the event of wear or damage. [Features]· Stepped tip shape increases stability when removing or attaching snap rings that were difficult to handle before.· Work from either above or from the side of the shaft. · Remove or attach Honda vehicle snap rings, which were difficult to handle before.

  Product Type	Overall Length(mm)
  Generic Tool	168

  From: 947,244 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Rear Hub Puller For Large Vehicle

  KTC(KYOTO TOOL)

  [Applications]· Removing rear wheel hubs on large vehicles. [Scope]· Rear wheel hubs on large vehicles (4 t or larger) that meet the following conditions.　· 8 or 10 holes (number of axle shaft mounting bolts)· P.C.D 140 mm to 188 mm· Axle shaft mounting bolt size M12 to M16[Features]· Vehicle's axle shaft mounting bolts are used so that aluminum wheels, etc., will not be damaged.· Just tighten with an offset wrench or socket (27 mm width across flats) and a drive tool.

  Product Type	Overall Length(mm)
  Generic Tool	-

  From: 10,520,496 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Rear Hub Puller For Large Vehicle Center Bolt

  KTC(KYOTO TOOL)

  [Features]· Service part for Rear Hub Puller for Large Vehicle AS353.

  Product Type	Overall Length(mm)
  Generic Tool	160

  From: 1,598,184 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Front Hub Puller For Large Vehicle

  KTC(KYOTO TOOL)

  [Applications]· Removing front wheel hubs on large vehicles. [Scope]· Front wheel hubs on large vehicles (4 t or larger) that meet the following conditions.　· 6, 8 or 10-hole (6 or 8 holes: JIS method, 10 holes: ISO method) wheel· P.C.D 222.25 mm to 335 mm· Hub bolt size M20 × 1.5, M22 × 1.5, M24 × 1.5[Features]· Puller is attached to hub bolt for removal so that aluminum wheels, etc., will not be damaged.· L and R stamped on arm body for quick identification of left and right.· Hub bolt sizes are M20, M22 and M24. Can identify bolt sizes by the number of lines. (M20: 1 line, M22: 2 lines, M24: 3 lines)

  Product Type	Overall Length(mm)
  Generic Tool	-

  From: 17,802,288 VND
  Days to Ship: Số ngày giao hàng: 12 Day(s)

  12 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Front Hub Puller For Large Vehicle Center Bolt

  KTC(KYOTO TOOL)

  It is a spare part for the front hub puller AS354 for large vehicles.

  Product Type	Overall Length(mm)
  Generic Tool	260

  From: 1,886,069 VND
  Days to Ship: Số ngày giao hàng: 12 Day(s)

  12 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Front Hub Puller Arm For Large Vehicle

  KTC(KYOTO TOOL)

  [Features]· Service part for Front Hub Puller for Large Vehicle AS354. (Includes 2 pcs)

  Product Type	Overall Length(mm)
  Generic Tool	180

  From: 3,471,552 VND
  Days to Ship: Số ngày giao hàng: 12 Day(s)

  12 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  19.0 Sq. Inner Socket For Impact Wrench

  KTC(KYOTO TOOL)

  Product Type	Overall Length(mm)
  Generic Tool	56.5 ～ 60.5

  From: 972,567 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  25.4 Sq. Inner Socket For Impact Wrench

  KTC(KYOTO TOOL)

  Product Type	Overall Length(mm)
  Generic Tool	61.5 ～ 63.5

  From: 1,094,235 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Plug Wrench

  KTC(KYOTO TOOL)

  [Features]· Applicable to 2 types of spark plugs with just 1 wrench.

  Product Type	Overall Length(mm)
  Generic Tool	115

  From: 346,625 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Extension Socket

  KTC(KYOTO TOOL)

  [Features]· Service part for Headlight Optical Axis Adjustment Wrench (AMLB0810).

  Product Type	Overall Length(mm)
  Generic Tool	-

  From: 406,710 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  O2 Sensor Socket Attachment

  KTC(KYOTO TOOL)

  [Features]· Designed with an optimal length and shape for use with O2 sensors.· Two types of drives (square drive: 9.5 sq., width across flats: 19 mm) are available, allowing use with many drive tools.· Use the attachments to avoid hindrances.

  Product Type	Overall Length(mm)
  Generic Tool	58

  From: 422,500 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  9.5 Sq. O₂ Sensor Socket Set

  KTC(KYOTO TOOL)

  [Features]· Designed with an optimal length and shape for use with O2 sensors.· Two types of drives (square drive: 9.5 sq., width across flats: 19 mm) are available, allowing use with many drive tools.· Use the attachments to avoid hindrances.

  Product Type	Overall Length(mm)
  Generic Tool	-

  From: 1,146,379 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Slide Hammer Puller AUD5

  KTC(KYOTO TOOL)

  [Features]· Shocker (hammer) weight is 5.3 kg.· AUD3 and AUD4 with 1.2 kg and 3.5 kg respective shocker weights are also available.· Hex nut (AUD5-6) is available as a service part.

  Product Type	Overall Length(mm)
  Generic Tool	825

  From: 14,725,872 VND
  Days to Ship: Số ngày giao hàng: 12 Day(s)

  12 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Slide Hammer Puller Sheet Metal Hook

  KTC(KYOTO TOOL)

  [Features]· Attachments for slide hammer pullers (AUD3, AUD4 and AUD5) to be used with sheet metal.

  Product Type	Overall Length(mm)
  Generic Tool	80 ～ 220

  From: 887,375 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Slide Hammer Puller Sheet Metal Hook Set [3 Pc Set]

  KTC(KYOTO TOOL)

  [Features]· Set containing sheet metal attachments AUD3-B2, B3 and C1 for Slide Hammer Puller AUD3.

  Product Type	Overall Length(mm)
  Generic Tool	-

  From: 6,787,872 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Slide Hammer Puller Sheet Metal Hook Set [4 Pc Set]

  KTC(KYOTO TOOL)

  [Features]· Set containing sheet metal attachments AUD3-B4, C2, D1 and E1-8 for Slide Hammer Puller AUD3.

  Product Type	Overall Length(mm)
  Generic Tool	-

  From: 8,777,664 VND
  Days to Ship: Số ngày giao hàng: 12 Day(s)

  12 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Screw Size Conversion Adapter Set For Slide Hammer Puller AUD Series

  KTC(KYOTO TOOL)

  [Features]· Freely set attachments onto slide hammer pullers (KTC and other brands) by using a screw size conversion adapter.

  Product Type	Overall Length(mm)
  Generic Tool	70 ～ 75

  From: 802,617 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Door Stopper

  KTC(KYOTO TOOL)

  [Applications]· Dedicated tool for stopping doors and rear gates so that they can be kept slightly open when performing sheet metal work or replacing parts.· Compatible with the following door striker shapes.* Striker ø10 mm or less (excluding vehicles with automatic locking mechanisms).[Features]· Can be secured by using it on the lock section of doors.· Compatible with most models.· Can be mounted and removed easily.

  Product Type	Overall Length(mm)
  Generic Tool	190

  From: 771,368 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Extendable Adjustment Tweezers For Gate Stopper

  KTC(KYOTO TOOL)

  [Features]・ Replacement parts for Gate Stopper AP902B

  Product Type	Overall Length(mm)
  Generic Tool	-

  From: 522,585 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Clip Clamp Tool With Hanger Set [11 Pc Set]

  KTC(KYOTO TOOL)

  [Applications]· For automobile lining and clip removal. [Scope]· Optimal for lining doors, back doors, quarter panels and floors, etc. in vehicles made in Japan. [Features]· Come with a handy hanger.

  Product Type	Overall Length(mm)
  Generic Tool	-

  From: 13,074,768 VND
  Days to Ship: Số ngày giao hàng: 12 Day(s)

  12 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Screw Size Conversion Adapter For Slide Hammer Puller

  KTC(KYOTO TOOL)

  [Features]· Freely set attachments onto slide hammer pullers (KTC and other brands) by using a screw size conversion adapter.

  Product Type	Overall Length(mm)
  Generic Tool	70

  From: 779,442 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Angled Clip Clamp Tool Set [3 Pc Set]

  KTC(KYOTO TOOL)

  [Applications]· For automobile lining and clip removal. [Scope]· Optimal for lining doors, back doors, quarter panels and floors, etc. in vehicles made in Japan.

  Product Type	Overall Length(mm)
  Generic Tool	-

  From: 2,248,774 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Angled Clip Clamp Tool

  KTC(KYOTO TOOL)

  [Applications]· For automobile lining and clip removal. [Scope]· Optimal for lining doors, back doors, quarter panels and floors, etc. in vehicles made in Japan.

  Product Type	Overall Length(mm)
  Generic Tool	235

  From: 864,200 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Straight Clip Clamp Tool

  KTC(KYOTO TOOL)

  [Applications]· For automobile lining and clip removal. [Scope]· Optimal for lining doors, back doors, quarter panels and floors, etc. in vehicles made in Japan.

  Product Type	Overall Length(mm)
  Generic Tool	270

  From: 864,200 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Angled Short Clip Clamp Tool

  KTC(KYOTO TOOL)

  [Applications]· For automobile lining and clip removal. [Scope]· Optimal for lining doors, back doors, quarter panels and floors, etc. in vehicles made in Japan.

  Product Type	Overall Length(mm)
  Generic Tool	175 ～ 195

  From: 788,881 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Long Clip Clamp Tool

  KTC(KYOTO TOOL)

  [Applications]· For automobile lining and clip removal. [Scope]· Optimal for lining doors, back doors, quarter panels and floors, etc. in vehicles made in Japan.

  Product Type	Overall Length(mm)
  Generic Tool	505

  From: 916,344 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Flat Type Remover

  KTC(KYOTO TOOL)

  [Features]· The section up to the grip employs a flat design, making it optimal for removing clips in deep places.

  Product Type	Overall Length(mm)
  Generic Tool	200

  From: 394,906 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Clip Clamp Pliers 35° (With Removable Lock Pin)

  KTC(KYOTO TOOL)

  [Applications]· Removing resin clips used in front or rear bumpers and front fender liners, etc., of vehicles and compressing / inserting shafts for easy mounting. [Scope]· Resin clips with removable lock pin (when mounting clips: shaft diameter ø5 to ø10)[Features]· Easily remove (unlock) the lock pin on the clip.· Can also be used to extract the clip body after removing the lock pin.· Easily compress / insert the clip shaft section when attaching the clip to the body.· The tip shape is designed to help avoid scratching the clip.· The tip has an angled shape, making it easier to avoid scratching the body and lining.· The tip has arrow marks for easy alignment with clip.

  Product Type	Overall Length(mm)
  Generic Tool	196

  From: 1,428,125 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Clip Clamp Pliers 80° (With Removable Lock Pin)

  KTC(KYOTO TOOL)

  [Applications]· Removing resin clips used in front or rear bumpers and front fender liners, etc., of vehicles and compressing / inserting shafts for easy mounting. [Scope]· Resin clips with removable lock pin (when mounting clips: shaft diameter ø5 to ø10)[Features]· Easily remove (unlock) the lock pin on the clip.· Can also be used to extract the clip body after removing the lock pin.· Easily compress / insert the clip shaft section when attaching the clip to the body.· The tip shape is designed to help avoid scratching the clip.· The tip has an angled shape, making it easier to avoid scratching the body and lining.· The tip has arrow marks for easy alignment with clip.

  Product Type	Overall Length(mm)
  Generic Tool	196

  From: 1,526,213 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Clip Clamp Pliers 35° / 80° Set (Removable Lock Pin Type)

  KTC(KYOTO TOOL)

  [Applications]· Removing resin clips used in front or rear bumpers and front fender liners, etc., of vehicles and compressing / inserting shafts for easy mounting. [Scope]· Resin clips with removable lock pin (when mounting clips: shaft diameter ø5 to ø10)[Features]· Easily remove (unlock) the lock pin on the clip.· Can also be used to extract the clip body after removing the lock pin.· Easily compress / insert the clip shaft section when attaching the clip to the body.· The tip shape is designed to help avoid scratching the clip.· The tip has an angled shape, making it easier to avoid scratching the body and lining.· The tip has arrow marks for easy alignment with clip.

  Product Type	Overall Length(mm)
  Generic Tool	-

  From: 6,576,192 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Extending Screwdriver

  KTC(KYOTO TOOL)

  [Features]· This dual-purpose tool has a shaft length that extends to 100 mm / 160 mm.· Has a magnetic tip that holds bolts securely.· The tip magnet moves to adjust magnet height and securely holds both countersunk bolts and non-countersunk bolts. (AD601-08 and AD601-10)

  Product Type	Overall Length(mm)
  Generic Tool	210 to 270

  From: 570,867 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  20.8 mm Dedicated Plug Wrench Short Type

  KTC(KYOTO TOOL)

  [Applications]·Water-cooled 2-cycle spark plug (20.8 mm) replacement work (It can also be used for 20.6 mm)·The overall length is as short as 170 mm, which is easy to use·The upper part of the spark plug is narrow, which is convenient for vehicle models for which a socket type plug wrench cannot be usedWrench: The opening diameter has an angle of 15°, and the front and back can be used and can be turned at an angle of 30°Box wrench: You can use it by wrenching the hexagonal part, avoiding the plug insulator part such as the bottom side of the tank

  Product Type	Overall Length(mm)
  Generic Tool	170

  From: 831,903 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  

  Pick Tool

  PB SWISS TOOLS

  [Features]·A special alloy based on spring steel that has excellent elasticity and maintains high hardness.[Applications]·Installation and removal of seals and O-rings on engines, transmissions, brakes and air conditioners

  Product Type	Overall Length(mm)
  Generic Tool	150

  From: 1,860,809 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  9.5 sq. Spark Plug Wrench (12 pt.)

  KTC(KYOTO TOOL)

  Product Type	Overall Length(mm)
  Generic Tool	62

  From: 696,398 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

BrandNhãn hiệu
Product SeriesDòng sản phẩm
From
Days to ShipSố ngày giao hàng
Product Type
Overall Length(mm)

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
BrandNhãn hiệu	KTC(KYOTO TOOL)	KTC(KYOTO TOOL)	KTC(KYOTO TOOL)	KTC(KYOTO TOOL)	KTC(KYOTO TOOL)	KTC(KYOTO TOOL)	KTC(KYOTO TOOL)	KTC(KYOTO TOOL)	KTC(KYOTO TOOL)	KTC(KYOTO TOOL)	KTC(KYOTO TOOL)	KTC(KYOTO TOOL)	KTC(KYOTO TOOL)	KTC(KYOTO TOOL)	KTC(KYOTO TOOL)	KTC(KYOTO TOOL)	KTC(KYOTO TOOL)	KTC(KYOTO TOOL)	KTC(KYOTO TOOL)	KTC(KYOTO TOOL)	KTC(KYOTO TOOL)	KTC(KYOTO TOOL)	KTC(KYOTO TOOL)	KTC(KYOTO TOOL)	KTC(KYOTO TOOL)	KTC(KYOTO TOOL)	KTC(KYOTO TOOL)	KTC(KYOTO TOOL)	KTC(KYOTO TOOL)	KTC(KYOTO TOOL)	KTC(KYOTO TOOL)	KTC(KYOTO TOOL)	PB SWISS TOOLS	KTC(KYOTO TOOL)
Product SeriesDòng sản phẩm	Snap Ring Pliers AS403A	Rear Hub Puller For Large Vehicle	Rear Hub Puller For Large Vehicle Center Bolt	Front Hub Puller For Large Vehicle	Front Hub Puller For Large Vehicle Center Bolt	Front Hub Puller Arm For Large Vehicle	19.0 Sq. Inner Socket For Impact Wrench	25.4 Sq. Inner Socket For Impact Wrench	Plug Wrench	Extension Socket	O2 Sensor Socket Attachment	9.5 Sq. O₂ Sensor Socket Set	Slide Hammer Puller AUD5	Slide Hammer Puller Sheet Metal Hook	Slide Hammer Puller Sheet Metal Hook Set [3 Pc Set]	Slide Hammer Puller Sheet Metal Hook Set [4 Pc Set]	Screw Size Conversion Adapter Set For Slide Hammer Puller AUD Series	Door Stopper	Extendable Adjustment Tweezers For Gate Stopper	Clip Clamp Tool With Hanger Set [11 Pc Set]	Screw Size Conversion Adapter For Slide Hammer Puller	Angled Clip Clamp Tool Set [3 Pc Set]	Angled Clip Clamp Tool	Straight Clip Clamp Tool	Angled Short Clip Clamp Tool	Long Clip Clamp Tool	Flat Type Remover	Clip Clamp Pliers 35° (With Removable Lock Pin)	Clip Clamp Pliers 80° (With Removable Lock Pin)	Clip Clamp Pliers 35° / 80° Set (Removable Lock Pin Type)	Extending Screwdriver	20.8 mm Dedicated Plug Wrench Short Type	Pick Tool	9.5 sq. Spark Plug Wrench (12 pt.)
From	947,244 VND	10,520,496 VND	1,598,184 VND	17,802,288 VND	1,886,069 VND	3,471,552 VND	972,567 VND	1,094,235 VND	346,625 VND	406,710 VND	422,500 VND	1,146,379 VND	14,725,872 VND	887,375 VND	6,787,872 VND	8,777,664 VND	802,617 VND	771,368 VND	522,585 VND	13,074,768 VND	779,442 VND	2,248,774 VND	864,200 VND	864,200 VND	788,881 VND	916,344 VND	394,906 VND	1,428,125 VND	1,526,213 VND	6,576,192 VND	570,867 VND	831,903 VND	1,860,809 VND	696,398 VND
Days to ShipSố ngày giao hàng	9 Day(s)	9 Day(s)	9 Day(s)	12 Day(s)	12 Day(s)	12 Day(s)	9 Day(s)	9 Day(s)	9 Day(s)	9 Day(s)	9 Day(s)	9 Day(s)	12 Day(s)	9 Day(s) or more	9 Day(s)	12 Day(s)	9 Day(s) or more	9 Day(s)	9 Day(s)	12 Day(s)	9 Day(s)	9 Day(s)	9 Day(s)	9 Day(s)	9 Day(s)	9 Day(s)	9 Day(s)	9 Day(s)	9 Day(s)	9 Day(s)	9 Day(s)	9 Day(s)	9 Day(s)	9 Day(s)
Product Type	Generic Tool	Generic Tool	Generic Tool	Generic Tool	Generic Tool	Generic Tool	Generic Tool	Generic Tool	Generic Tool	Generic Tool	Generic Tool	Generic Tool	Generic Tool	Generic Tool	Generic Tool	Generic Tool	Generic Tool	Generic Tool	Generic Tool	Generic Tool	Generic Tool	Generic Tool	Generic Tool	Generic Tool	Generic Tool	Generic Tool	Generic Tool	Generic Tool	Generic Tool	Generic Tool	Generic Tool	Generic Tool	Generic Tool	Generic Tool
Overall Length(mm)	168	-	160	-	260	180	56.5 ～ 60.5	61.5 ～ 63.5	115	-	58	-	825	80 ～ 220	-	-	70 ～ 75	190	-	-	70	-	235	270	175 ～ 195	505	200	196	196	-	210 to 270	170	150	62

Loading...Tải…