Dial Gauges

• You can add up to 6 items per a category to the compare list. Compare

  

  Dial Gauge Stylus

  MITUTOYO

  [Features]·This is a dial gauge accessory (probe).·Thread section of replacement probe: M2.5 (P=0.45) ×5 mm

  Application	Scale interval minimal display(mm)	Display Method	Maximum Measurement Length (Range Selection)(mm)	Waterproof Function	Output terminal for measuring data: with or without	Scale type	Calibration Certificate
  Probe / Parts	-	-	-	-	-	-	-

  Days to Ship: Số ngày giao hàng: 2 Day(s) or more

  2 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Small Dial Gauge 1 Series, Outer Frame Diameter φ31 mm, φ36 mm, φ40 mm Type

  MITUTOYO

  Dial gauge with a compact design. Does not take up space when attached to jigs.

  Application	Scale interval minimal display(mm)	Display Method	Maximum Measurement Length (Range Selection)(mm)	Waterproof Function	Output terminal for measuring data: with or without	Scale type	Calibration Certificate
  Standard Type	0.002 ～ 0.01	Dial	0–1 ～ 1.1 to 5	NA	NA	Continuous Scale / Balance Scale	-

  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Dial Gauge, ABSOLUTE Digimatic Indicator ID-CX SERIES 543 - Standard Type

  MITUTOYO

  • The ABS (absolute) sensor restores the last origin position automaticallywhen the indicator is turned on.• Thanks to Mitutoyo's ABSOLUTE Linear Encoder, reliability has been increaseddue to elimination of over-speed errors.• Tolerance-judging measurement is available by setting upper and lower limit values.• Battery life of approx. 7,000 hours in continuous use has been achieved with onlyone battery.• Equipped with a data output por...Readmore

  Application	Scale interval minimal display(mm)	Display Method	Maximum Measurement Length (Range Selection)(mm)	Waterproof Function	Output terminal for measuring data: with or without	Scale type	Calibration Certificate
  Standard Type / Lever Type (Indicator)	0.01	Digital	-	NA	-	-	-

  From: 9,377,000 VND
  Days to Ship: Số ngày giao hàng: Quote

  Quote

• You can add up to 6 items per a category to the compare list. Compare

  

  Regular Dial Gauge 2 Series, Long Stroke Type

  MITUTOYO

  2 Series Regular Dial Gauge, Long Stroke Type

  Application	Scale interval minimal display(mm)	Display Method	Maximum Measurement Length (Range Selection)(mm)	Waterproof Function	Output terminal for measuring data: with or without	Scale type	Calibration Certificate
  Standard Type	0.01	Dial	6~20 ～ 21 to 50	Available / NA	NA	Continuous Scale / Reverse Scale	-

  Days to Ship: Số ngày giao hàng: Quote

  Quote

• You can add up to 6 items per a category to the compare list. Compare

  

  Dial Gauge, Needle Gauge Head

  OZAKI MFG (PEACOCK)

  Replacement probe. (Entire threaded portion is M2.5 (P = 0.45) mm.)

  Application	Scale interval minimal display(mm)	Display Method	Maximum Measurement Length (Range Selection)(mm)	Waterproof Function	Output terminal for measuring data: with or without	Scale type	Calibration Certificate
  Probe	-	-	-	-	-	-	-

  From: 1,104,186 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Dial Gauge, Digital Gauge

  OZAKI MFG (PEACOCK)

  Comfortable measurement is possible by selecting the model according to the measurement. Orange coloring makes it easy to see even in dark places.

  Application	Scale interval minimal display(mm)	Display Method	Maximum Measurement Length (Range Selection)(mm)	Waterproof Function	Output terminal for measuring data: with or without	Scale type	Calibration Certificate
  linear gauge	0.001/0.01 switching	Digital	6~20	-	-	-	-

  From: 9,781,290 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Standard Shaped Dial Gauge (Scale Interval: 0.01 mm)

  OZAKI MFG (PEACOCK)

  [Features]· The most widely used dial gauge with scale intervals of 0.01 mm. Select from a wide range of devices to suit the application.· With an O-ring used to prevent ingress of water or oil from the gap between the external and internal frames, it features excellent waterproofing.· By using SK hardened steel, the stem possesses a high strength that is resilient even for severe use.· Gears are protected from sudden upward pressure...Readmore

  Application	Scale interval minimal display(mm)	Display Method	Maximum Measurement Length (Range Selection)(mm)	Waterproof Function	Output terminal for measuring data: with or without	Scale type	Calibration Certificate
  Standard Type	0.01	Dial	0–1 ～ 6~20	Available	-	Continuous Scale / Reverse Scale	-

  From: 961,958 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Dial Gauge SERIES 2 - Standard Type, 0.01mm And 0.001 Graduation

  MITUTOYO

  • Standard 0.01mm graduation dial gauges having a bezel with an outside diameter of 57 mm.All types come with limit markers and a bezel clamp as standard.• The bezel clamp and lifting lever (optional) can be attached to either the right or leftside.These parts can be easily installed and removed without tools.• Secure adhesion between the bezel and crystal as well as the use of an O-ringprevents water or oil penetration.• The spindle ...Readmore

  Application	Scale interval minimal display(mm)	Display Method	Maximum Measurement Length (Range Selection)(mm)	Waterproof Function	Output terminal for measuring data: with or without	Scale type	Calibration Certificate
  Standard Type	0.001 ～ 0.01	Dial	1.1 to 5 ～ 6~20	NA	NA	Continuous Scale / Balance Scale	-

  Days to Ship: Số ngày giao hàng: 46 Day(s) or more

  46 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Dial Gauge, New Pic-test (No Clutch Type, PCN Type)

  OZAKI MFG (PEACOCK)

  [Features]· No-latch type with a lever-type dial gauge lacking the most general switching lever.· The pointer continually rotates clockwise in accordance with the upward and downward movement of the gauge head, improving measurement efficiency for a wide range of applications.· Select from 0.01 mm, 0.002 mm, or 0.001 mm types.· Miniature bearings are used for the bearings of the fulcrum portion of the gauge heads to reduce the ...Readmore

  Application	Scale interval minimal display(mm)	Display Method	Maximum Measurement Length (Range Selection)(mm)	Waterproof Function	Output terminal for measuring data: with or without	Scale type	Calibration Certificate
  Lever Type (Indicator)	0.001 ～ 0.01	Dial	0–1 ～ 1.1 to 5	Available	-	Balance Scale	-

  From: 2,901,810 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Dial Gauge, Dial Thickness Gauge (0.01 mm Type)

  OZAKI MFG (PEACOCK)

  [Features]· This dial thickness gauge is a handy type measuring instrument operated by a lever that can quickly measure the thickness of small components, rubber, felt, paper, and so on.· Select from a wide range of device models to suit the application.· The G and H types have Peacock's greatest feature, an integrated structure of the frame and gauge parts, with superior workability and durability

  Application	Scale interval minimal display(mm)	Display Method	Maximum Measurement Length (Range Selection)(mm)	Waterproof Function	Output terminal for measuring data: with or without	Scale type	Calibration Certificate
  Thickness type	0.01	Dial	6~20	-	-	Continuous Scale	-

  From: 1,913,884 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Dial Gauge, Magnetic Stands Series 7

  MITUTOYO

  Mitutoyo’s Magnetic Stands accept all dial indicators and dial test indicators (with stem ø6 or ø8) and clamp to iron or steel surfaces with a strong magnetic force.

  Application	Scale interval minimal display(mm)	Display Method	Maximum Measurement Length (Range Selection)(mm)	Waterproof Function	Output terminal for measuring data: with or without	Scale type	Calibration Certificate
  Parts	-	-	-	-	-	-	-

  Days to Ship: Số ngày giao hàng: Quote

  Quote

• You can add up to 6 items per a category to the compare list. Compare

  

  Dial Test Indicator SERIES 513 — Universal Type(Measuring Range: 0.8mm)

  MITUTOYO

  Universal application to all directions. (Not only the direction of the measuring point, but also the direction of measurement itself can be adjusted 360 degrees without moving the indicator.)

  Application	Scale interval minimal display(mm)	Display Method	Maximum Measurement Length (Range Selection)(mm)	Waterproof Function	Output terminal for measuring data: with or without	Scale type	Calibration Certificate
  Standard Type	-	Dial	-	-	-	-	-

  Days to Ship: Số ngày giao hàng: Quote

  Quote

• You can add up to 6 items per a category to the compare list. Compare

  

  Caliper Gauge

  KROEPLIN

  Application	Scale interval minimal display(mm)	Display Method	Maximum Measurement Length (Range Selection)(mm)	Waterproof Function	Output terminal for measuring data: with or without	Scale type	Calibration Certificate
  Caliper Type	0.01	Digital	-	Available	-	-	-

  From: 23,438,629 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s)

  6 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Dial Gauge, ABSOLUTE Digimatic Indicator ID-SX Series 543(Measuring force(N): 1.5 or less)

  MITUTOYO

  • Cost-effective oriented design ID-SX indicators use a button-type battery (SR44)and come with the minimum of functionality for ease of use.There is a choice of models in the lineup allowing selection of 0.01 mm, 0.001 mmor inch-based measurement resolutions.• ABS (absolute) sensor• Long battery life One button battery (SR44) provides approximately 20,000 hours of continuous use for .0005”/0.01mm resolution models.

  Application	Scale interval minimal display(mm)	Display Method	Maximum Measurement Length (Range Selection)(mm)	Waterproof Function	Output terminal for measuring data: with or without	Scale type	Calibration Certificate
  -	-	-	0~12.7	Available	-	-	-

  Days to Ship: Số ngày giao hàng: Quote

  Quote

• You can add up to 6 items per a category to the compare list. Compare

  

  XT-5 Needle Measurement Probe

  OZAKI MFG (PEACOCK)

  Replacement probe. (Entire threaded portion is M2.5 (P = 0.45) mm.)

  Application	Scale interval minimal display(mm)	Display Method	Maximum Measurement Length (Range Selection)(mm)	Waterproof Function	Output terminal for measuring data: with or without	Scale type	Calibration Certificate
  Probe	-	-	-	-	-	-	-

  From: 986,351 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  ABSOLUTE Digimatic Indicator ID-C SERIES 543 — Bore Gage Type

  MITUTOYO

  • Dedicated to inside measurement with minimum-value Hold and tolerance judgement functions. • Measurement data memory function (9 measurement results can be stored) • Simple operation of many functions with five buttons and status icons. • Wide LCD and new analog bar graph are now standard on all models. • Sampling is performed fifty times per second for accurate detection of maximum and minimum values.

  Application	Scale interval minimal display(mm)	Display Method	Maximum Measurement Length (Range Selection)(mm)	Waterproof Function	Output terminal for measuring data: with or without	Scale type	Calibration Certificate
  Lever Type (Indicator)	-	Digital	-	-	-	-	-

  Days to Ship: Số ngày giao hàng: Quote

  Quote

• You can add up to 6 items per a category to the compare list. Compare

  

  Dial Gauge Flat Back Cover with Handles

  MITUTOYO

  A flat rear cover designed for the dial gauge.

  Application	Scale interval minimal display(mm)	Display Method	Maximum Measurement Length (Range Selection)(mm)	Waterproof Function	Output terminal for measuring data: with or without	Scale type	Calibration Certificate
  Standard Type	0.01	Dial	1.1 to 5	-	-	Balance Scale	-

  Days to Ship: Số ngày giao hàng: Quote

  Quote

• You can add up to 6 items per a category to the compare list. Compare

  

  Dial Gauge Extension Rod

  MITUTOYO

  [Features]· An option for dial gauges.

  Application	Scale interval minimal display(mm)	Display Method	Maximum Measurement Length (Range Selection)(mm)	Waterproof Function	Output terminal for measuring data: with or without	Scale type	Calibration Certificate
  Parts	-	-	-	-	-	-	-

  Days to Ship: Số ngày giao hàng: 10 Day(s) or more

  10 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Dial Gauge, ABSOLUTE Digimatic Indicator ID-SX Series 543(Measuring force(N): 2.5 or less)

  MITUTOYO

  • Cost-effective oriented design ID-SX indicators use a button-type battery (SR44) and come with the minimum of functionality for ease of use. There is a choice of models in the lineup allowing selection of 0.01 mm, 0.001 mm or inch-based measurement resolutions. • IP53 dust/water protection level The models listed below also provide IP53 dust/ water protection level specifications: 543-794/94B/95/95B/96/96B • ABS (absolute) sensor Th...Readmore

  Application	Scale interval minimal display(mm)	Display Method	Maximum Measurement Length (Range Selection)(mm)	Waterproof Function	Output terminal for measuring data: with or without	Scale type	Calibration Certificate
  Standard Type	-	Digital	-	-	-	-	-

  From: 3,716,667 VND
  Days to Ship: Số ngày giao hàng: Quote

  Quote

• You can add up to 6 items per a category to the compare list. Compare

  

  SERIES 1 — Compact Type, Small Diameter(Measuring Range: 0.025-0.1inch)

  MITUTOYO

  • Compact dial indicators with bezel diameters of ø31 or ø36mmfor restricted-space applications in gaging jigs.

  Application	Scale interval minimal display(mm)	Display Method	Maximum Measurement Length (Range Selection)(mm)	Waterproof Function	Output terminal for measuring data: with or without	Scale type	Calibration Certificate
  Standard Type	-	Dial	-	-	-	-	-

  Days to Ship: Số ngày giao hàng: 46 Day(s) or more

  46 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Dial Gauge, ABSOLUTE Digimatic Indicator ID-CX Series 543 — Standard Type(Measuring Range: 0.5-2inch)

  MITUTOYO

  • The ABS (absolute) sensor restores the last origin position automatically when the indicator is turned on. • Thanks to Mitutoyo's ABSOLUTE Linear Encoder, reliability has been increased due to elimination ofover speed errors. • Tolerance-judging measurement is available by setting upper and lower limit values. • Battery life of approx. 7,000 hours in continuous use has been achieved with only one battery. • Equipped with a data output p...Readmore

  Application	Scale interval minimal display(mm)	Display Method	Maximum Measurement Length (Range Selection)(mm)	Waterproof Function	Output terminal for measuring data: with or without	Scale type	Calibration Certificate
  Lever Type (Indicator)	-	Digital	-	-	-	-	-

  Days to Ship: Số ngày giao hàng: 46 Day(s) or more

  46 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  ABSOLUTE Digimatic Indicator ID-SX SERIES 543

  MITUTOYO

  • Cost-effective oriented design ID-SX indicators use a button-type battery (SR44) and come with the minimum of functionality for ease of use. There is a choice of models in the lineup allowing selection of 0.01 mm, 0.001 mmor inch-based measurement resolutions. • IP53 dust/water protection level The models listed below also provide IP53 dust/water protection level specifications:543 794/94B/95/95B/96/96B • ABS (absolute) sensor These D...Readmore

  Application	Scale interval minimal display(mm)	Display Method	Maximum Measurement Length (Range Selection)(mm)	Waterproof Function	Output terminal for measuring data: with or without	Scale type	Calibration Certificate
  Lever Type (Indicator)	-	Digital	-	-	-	-	-

  Days to Ship: Số ngày giao hàng: Quote

  Quote

• You can add up to 6 items per a category to the compare list. Compare

  

  Dial Gauge, Digital Indicator

  NIIGATA SEIKI (SK)

  Dial gauge that is ideal for displacement measurements such as plane contour, workpiece mounting quality evaluation, shaft runout and perpendicularity, etc.[Features]· It is a high cost performance model with an easy-to-see digital display.· With hold function.· With auto off function. (Approximately 5 minutes)· Scale interval 0.01 mm, measurement range 12.7 mm.· Comes with two back covers, a flat type and a type with ...Readmore

  Application	Scale interval minimal display(mm)	Display Method	Maximum Measurement Length (Range Selection)(mm)	Waterproof Function	Output terminal for measuring data: with or without	Scale type	Calibration Certificate
  Standard Type	0.01	Digital	6~20	NA	NA	-	-

  From: 1,964,441 VND
  Days to Ship: Số ngày giao hàng: Same day

  Same day

• You can add up to 6 items per a category to the compare list. Compare

  

  Dial Gauge, ABSOLUTE Digimatic Indicator ID-CX Series 543

  MITUTOYO

  • The ABS (absolute) sensor restores the last origin position automaticallywhen the indicator is turned on.• Thanks to Mitutoyo's ABSOLUTE Linear Encoder, reliability has been increaseddue to elimination of over-speed errors.• Tolerance-judging measurement is available by setting upper and lower limit values.• Battery life of approx. 7,000 hours in continuous use has been achieved with only one battery.• Equipped with a data output po...Readmore

  Application	Scale interval minimal display(mm)	Display Method	Maximum Measurement Length (Range Selection)(mm)	Waterproof Function	Output terminal for measuring data: with or without	Scale type	Calibration Certificate
  Standard Type	-	Digital	-	-	-	-	-

  Days to Ship: Số ngày giao hàng: 46 Day(s) or more

  46 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  ABSOLUTE Digimatic Indicator ID-C SERIES 543 — Calculation Type

  MITUTOYO

  • Calculation function operates on spindle displacement. • Entering the appropriate formula factors for a fixture dedicated to the application enables direct measurement readout, thereby eliminating any need for the conversion tables previously needed for those applications where fixtures are typically used. • Peak-Value Run-out/MAX/MIN Hold enables GO/±NG judgement for peak value. • Simple operation of many functions with fiv...Readmore

  Application	Scale interval minimal display(mm)	Display Method	Maximum Measurement Length (Range Selection)(mm)	Waterproof Function	Output terminal for measuring data: with or without	Scale type	Calibration Certificate
  Lever Type (Indicator)	-	Digital	-	-	-	-	-

  Days to Ship: Số ngày giao hàng: 46 Day(s) or more

  46 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  Dial Gauge, Pictest (Switch Lever Type, PC Series)

  OZAKI MFG (PEACOCK)

  [Features]· Lever-type dial gauge with switch lever.· Miniature bearings are used for the bearings of the fulcrum portion of the gauge heads to reduce the effects of rod play and achieve excellent indicating stability.· With an O-ring used to prevent ingress of water or oil from the gap between the external and internal frames, it features excellent waterproofing.· The gauge damage prevention probe is provided on all models.· By adopti...Readmore

  Application	Scale interval minimal display(mm)	Display Method	Maximum Measurement Length (Range Selection)(mm)	Waterproof Function	Output terminal for measuring data: with or without	Scale type	Calibration Certificate
  Lever Type (Indicator)	0.002 ～ 0.01	Dial	0–1	Available	-	Balance Scale	-

  From: 2,477,289 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Dial Pipe Gauge

  OZAKI MFG (PEACOCK)

  Suitable for measuring the inner thickness of pipe shapes and the thickness of curved workpieces. Special shapes can also be manufactured for the gauge heads and anvil part.

  Application	Scale interval minimal display(mm)	Display Method	Maximum Measurement Length (Range Selection)(mm)	Waterproof Function	Output terminal for measuring data: with or without	Scale type	Calibration Certificate
  Thickness type	0.01	Dial	6~20	-	-	Continuous Scale	-

  From: 2,482,797 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Caliper Gauge

  KROEPLIN

  Application	Scale interval minimal display(mm)	Display Method	Maximum Measurement Length (Range Selection)(mm)	Waterproof Function	Output terminal for measuring data: with or without	Scale type	Calibration Certificate
  Caliper Type	0.005 ～ 0.05	Dial	-	Available	-	-	-

  From: 19,306,996 VND
  Days to Ship: Số ngày giao hàng: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Dial Gauge, Digimatic Indicator ID-H Series 543

  MITUTOYO

  • This new-generation digital indicator offers the excellent accuracy and functionalityexpected from the top class of indicator.• Take advantage of its high accuracy backed up by 0.5μm/.00002” resolution,remote control functionality via a handheld controller (or an RS-232C interface) and easy run out measurements with the well-established analog bar display.• Functionality meets the needs of diverse measurement applications.

  Application	Scale interval minimal display(mm)	Display Method	Maximum Measurement Length (Range Selection)(mm)	Waterproof Function	Output terminal for measuring data: with or without	Scale type	Calibration Certificate
  Lever Type (Indicator)	-	Digital	-	-	-	-	-

  From: 13,252,500 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Inner Dial Caliper Gauge

  TECLOCK

  An inner caliper gauge that measures the inner diameter of cylindrical workpieces and the groove diameter at the back.[Features]·The groove diameter of the O-ring can also be measured by improving the replacement stylus.·By exchanging the attached replacement stylus, it is possible to perform comparative measurements within ±1 mm of the set dimension (indication range of 2 mm).·Standard dimensions are set using a micromete...Readmore

  Application	Scale interval minimal display(mm)	Display Method	Maximum Measurement Length (Range Selection)(mm)	Waterproof Function	Output terminal for measuring data: with or without	Scale type	Calibration Certificate
  Caliper Type	0.01	Dial	21 to 50 ～ 101 or More	-	-	Continuous Scale	-

  From: 7,750,554 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Dial Gauge, Dial Lens Gauge

  OZAKI MFG (PEACOCK)

  Easy measurement of the thickness of rough surfaces, crescent-shaped lenses, or flat surfaces. Replace the gauge head and anvil to measure plane thickness. Flat probe included.

  Application	Scale interval minimal display(mm)	Display Method	Maximum Measurement Length (Range Selection)(mm)	Waterproof Function	Output terminal for measuring data: with or without	Scale type	Calibration Certificate
  Thickness type	0.01	Dial	6~20	-	-	Continuous Scale	-

  From: 2,566,600 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Contact Points - Flat point

  MITUTOYO

  Optional Accessory for Digimatic and Dial Indicators and Linear Gages

  Application	Scale interval minimal display(mm)	Display Method	Maximum Measurement Length (Range Selection)(mm)	Waterproof Function	Output terminal for measuring data: with or without	Scale type	Calibration Certificate
  Parts	-	-	-	-	-	-	-

  Days to Ship: Số ngày giao hàng: Quote

  Quote

• You can add up to 6 items per a category to the compare list. Compare

  

  Large Dial Gauge, 3/4 Series Long Stroke

  MITUTOYO

  The scale of this dial gauge has a large surface diameter for easy reading. Models with long measurement ranges are also available. Limit needle and outer frame clamp are included as standard with all models.

  Application	Scale interval minimal display(mm)	Display Method	Maximum Measurement Length (Range Selection)(mm)	Waterproof Function	Output terminal for measuring data: with or without	Scale type	Calibration Certificate
  Standard Type	0.001 ～ 0.01	Dial	0–1 ～ 51 to 100	NA	NA	Continuous Scale / Balance Scale	-

  Days to Ship: Số ngày giao hàng: Quote

  Quote

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  

  

  Lever Test (Lever Swap Type)

  TECLOCK

  Lever Test Features]Since the probe and pointer are nonmagnetic, they are not affected by magnetism.The probe can be set at an angle of 200° arc.[Specifications]Maximum Measurement Length (Range Selection):0-1mmScale type:Balanced ScaleMounting shaft diameter:6mmMeasured force:0.4N or less[Application]For various measurements such as outside, inside, inside the groove, centering.

  Application	Scale interval minimal display(mm)	Display Method	Maximum Measurement Length (Range Selection)(mm)	Waterproof Function	Output terminal for measuring data: with or without	Scale type	Calibration Certificate
  Lever Type (Indicator)	0.002 ～ 0.01	Dial	0–1	-	-	Balance Scale	-

  From: 2,885,679 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Measuring Joint

  OZAKI MFG (PEACOCK)

  Very useful to add probe joints when probes do not reach the object using a standard dial gauge.

  Application	Scale interval minimal display(mm)	Display Method	Maximum Measurement Length (Range Selection)(mm)	Waterproof Function	Output terminal for measuring data: with or without	Scale type	Calibration Certificate
  Probe	-	-	-	-	-	-	-

  From: 235,695 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Dial Gauge, Dial Thickness Gauge (0.001 mm Type)

  OZAKI MFG (PEACOCK)

  [Features]· Thickness gauge with scale intervals of 0.001 mm.· Ideal for measuring the thickness of precise small objects, films, special fabrics, etc.· Available with two measurement ranges, 0 to 1 mm or 0 to 5 mm

  Application	Scale interval minimal display(mm)	Display Method	Maximum Measurement Length (Range Selection)(mm)	Waterproof Function	Output terminal for measuring data: with or without	Scale type	Calibration Certificate
  Thickness type	0.001	Dial	0–1 ～ 1.1 to 5	-	-	Continuous Scale	-

  From: 4,550,517 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Dial Gauge, Contact Points - Needle point

  MITUTOYO

  Optional Accessory for Digimatic and Dial Indicators and Linear Gages

  Application	Scale interval minimal display(mm)	Display Method	Maximum Measurement Length (Range Selection)(mm)	Waterproof Function	Output terminal for measuring data: with or without	Scale type	Calibration Certificate
  Parts	-	-	-	-	-	-	-

  Days to Ship: Số ngày giao hàng: Quote

  Quote

• You can add up to 6 items per a category to the compare list. Compare

  

  Regular Dial Gauge 2 Series, Waterproof Type, Scale Interval 0.01 / 0.001 mm Type

  MITUTOYO

  Dial Indicators Series 2- Metric Standard Type [FEATURES]Series 2 dial indicators are Mitutoyo’s most popular, and have the widest application.Standard 0.01 mm graduation dial gauges having an outer frame with an outside diameter of 57 mm. All types come with limit pins and an outer frame clamp as standard.The outer clamp and lifting lever (optional) can be attached to either the right or left side. These parts can be easily installed and r...Readmore

  Application	Scale interval minimal display(mm)	Display Method	Maximum Measurement Length (Range Selection)(mm)	Waterproof Function	Output terminal for measuring data: with or without	Scale type	Calibration Certificate
  Standard Type	0.001 ～ 0.01	Dial	0–1 ～ 1.1 to 5	Available	NA	Continuous Scale / Balance Scale	-

  Days to Ship: Số ngày giao hàng: Quote

  Quote

• You can add up to 6 items per a category to the compare list. Compare

  

  Dial Gauge 543 Series, Digimatic Indicator ID-H

  MITUTOYO

  World top level digital indicator that supports high accuracy and multi-functional measurement. Equipped with a wide range of functions that support diversified measurement requirements.

  Application	Scale interval minimal display(mm)	Display Method	Maximum Measurement Length (Range Selection)(mm)	Waterproof Function	Output terminal for measuring data: with or without	Scale type	Calibration Certificate
  Standard Type	0.0005/0.001 switching	Digital	21 to 50	NA	Available	-	-

  From: 13,252,500 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  Lever Type Dial Gauge

  MAHR

  [Features]· Fixing bracket (shank) removable structure allows the position to be freely changed.· Wear-resistant artificial gems are used for the entire internal shaft.· There are 2 mounting shafts, 6 mm and 8 mm, which can be removed.· Vibration-proof structure.· A structure in which the pointer's cover glass can be removed, eliminating time spent repairing any damage to the glass.· Fixing bracket (shank) removable structure enables ...Readmore

  Application	Scale interval minimal display(mm)	Display Method	Maximum Measurement Length (Range Selection)(mm)	Waterproof Function	Output terminal for measuring data: with or without	Scale type	Calibration Certificate
  Lever Type (Indicator)	0.002 ～ 0.01	Dial	0–1	-	-	Balance Scale	-

  From: 3,242,725 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Standard Dial Gauge

  TECLOCK

  [Features]· High-precision dial gauge that can be read in units of 0.01 mm.[Applications]· For use in areas with limited space, such as sizing of machinery and assembly into dedicated machines.

  Application	Scale interval minimal display(mm)	Display Method	Maximum Measurement Length (Range Selection)(mm)	Waterproof Function	Output terminal for measuring data: with or without	Scale type	Calibration Certificate
  Standard Type	0.01	Dial	1.1 to 5 ～ 6~20	-	-	Continuous Scale	-

  From: 1,277,496 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Standard Shaped Dial Gauge (Scale Interval: 0.001 mm)

  OZAKI MFG (PEACOCK)

  The most widely used dial gauge with scale intervals of 0.001/0.005 mm. Select from a wide range of devices to suit the application.[Features]· With an O-ring used to prevent ingress of water or oil from the gap between the external and internal frames, it features excellent waterproofing.· By using SK hardened steel, the stem possesses a high strength that is resilient even for severe use.· Gears are protected from sudden upward pressure...Readmore

  Application	Scale interval minimal display(mm)	Display Method	Maximum Measurement Length (Range Selection)(mm)	Waterproof Function	Output terminal for measuring data: with or without	Scale type	Calibration Certificate
  Standard Type	0.001	Dial	0–1 ～ 1.1 to 5	Available	-	Continuous Scale / Balance Scale	-

  From: 2,704,500 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  

  

  Spherical Surface Probe

  OZAKI MFG (PEACOCK)

  Replacement probe. (Entire threaded portion is M2.5 (P = 0.45) mm.)

  Application	Scale interval minimal display(mm)	Display Method	Maximum Measurement Length (Range Selection)(mm)	Waterproof Function	Output terminal for measuring data: with or without	Scale type	Calibration Certificate
  Probe	-	-	-	-	-	-	-

  From: 175,976 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  Slope Shaped Probe

  OZAKI MFG (PEACOCK)

  Replacement probe. (Entire threaded portion is M2.5 (P = 0.45) mm.)

  Application	Scale interval minimal display(mm)	Display Method	Maximum Measurement Length (Range Selection)(mm)	Waterproof Function	Output terminal for measuring data: with or without	Scale type	Calibration Certificate
  Probe	-	-	-	-	-	-	-

  From: 196,006 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  

  

  Plain Type Probe

  OZAKI MFG (PEACOCK)

  Replacement probe. (Entire threaded portion is M2.5 (P = 0.45) mm.)

  Application	Scale interval minimal display(mm)	Display Method	Maximum Measurement Length (Range Selection)(mm)	Waterproof Function	Output terminal for measuring data: with or without	Scale type	Calibration Certificate
  Probe	-	-	-	-	-	-	-

  From: 275,798 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

BrandNhãn hiệu
Product SeriesDòng sản phẩm
From
Days to ShipSố ngày giao hàng
Application
Scale interval minimal display(mm)
Display Method
Maximum Measurement Length (Range Selection)(mm)
Waterproof Function
Output terminal for measuring data: with or without
Scale type
Calibration Certificate

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
BrandNhãn hiệu	MITUTOYO	MITUTOYO	MITUTOYO	MITUTOYO	OZAKI MFG (PEACOCK)	OZAKI MFG (PEACOCK)	OZAKI MFG (PEACOCK)	MITUTOYO	OZAKI MFG (PEACOCK)	OZAKI MFG (PEACOCK)	MITUTOYO	MITUTOYO	KROEPLIN	MITUTOYO	OZAKI MFG (PEACOCK)	MITUTOYO	MITUTOYO	MITUTOYO	MITUTOYO	MITUTOYO	MITUTOYO	MITUTOYO	NIIGATA SEIKI (SK)	MITUTOYO	MITUTOYO	OZAKI MFG (PEACOCK)	OZAKI MFG (PEACOCK)	KROEPLIN	MITUTOYO	TECLOCK	OZAKI MFG (PEACOCK)	MITUTOYO	MITUTOYO	TECLOCK	OZAKI MFG (PEACOCK)	OZAKI MFG (PEACOCK)	MITUTOYO	MITUTOYO	MITUTOYO	MAHR	TECLOCK	OZAKI MFG (PEACOCK)	OZAKI MFG (PEACOCK)	OZAKI MFG (PEACOCK)	OZAKI MFG (PEACOCK)
Product SeriesDòng sản phẩm	Dial Gauge Stylus	Small Dial Gauge 1 Series, Outer Frame Diameter φ31 mm, φ36 mm, φ40 mm Type	Dial Gauge, ABSOLUTE Digimatic Indicator ID-CX SERIES 543 - Standard Type	Regular Dial Gauge 2 Series, Long Stroke Type	Dial Gauge, Needle Gauge Head	Dial Gauge, Digital Gauge	Standard Shaped Dial Gauge (Scale Interval: 0.01 mm)	Dial Gauge SERIES 2 - Standard Type, 0.01mm And 0.001 Graduation	Dial Gauge, New Pic-test (No Clutch Type, PCN Type)	Dial Gauge, Dial Thickness Gauge (0.01 mm Type)	Dial Gauge, Magnetic Stands Series 7	Dial Test Indicator SERIES 513 — Universal Type(Measuring Range: 0.8mm)	Caliper Gauge	Dial Gauge, ABSOLUTE Digimatic Indicator ID-SX Series 543(Measuring force(N): 1.5 or less)	XT-5 Needle Measurement Probe	ABSOLUTE Digimatic Indicator ID-C SERIES 543 — Bore Gage Type	Dial Gauge Flat Back Cover with Handles	Dial Gauge Extension Rod	Dial Gauge, ABSOLUTE Digimatic Indicator ID-SX Series 543(Measuring force(N): 2.5 or less)	SERIES 1 — Compact Type, Small Diameter(Measuring Range: 0.025-0.1inch)	Dial Gauge, ABSOLUTE Digimatic Indicator ID-CX Series 543 — Standard Type(Measuring Range: 0.5-2inch)	ABSOLUTE Digimatic Indicator ID-SX SERIES 543	Dial Gauge, Digital Indicator	Dial Gauge, ABSOLUTE Digimatic Indicator ID-CX Series 543	ABSOLUTE Digimatic Indicator ID-C SERIES 543 — Calculation Type	Dial Gauge, Pictest (Switch Lever Type, PC Series)	Dial Pipe Gauge	Caliper Gauge	Dial Gauge, Digimatic Indicator ID-H Series 543	Inner Dial Caliper Gauge	Dial Gauge, Dial Lens Gauge	Contact Points - Flat point	Large Dial Gauge, 3/4 Series Long Stroke	Lever Test (Lever Swap Type)	Measuring Joint	Dial Gauge, Dial Thickness Gauge (0.001 mm Type)	Dial Gauge, Contact Points - Needle point	Regular Dial Gauge 2 Series, Waterproof Type, Scale Interval 0.01 / 0.001 mm Type	Dial Gauge 543 Series, Digimatic Indicator ID-H	Lever Type Dial Gauge	Standard Dial Gauge	Standard Shaped Dial Gauge (Scale Interval: 0.001 mm)	Spherical Surface Probe	Slope Shaped Probe	Plain Type Probe
From			9,377,000 VND		1,104,186 VND	9,781,290 VND	961,958 VND		2,901,810 VND	1,913,884 VND			23,438,629 VND		986,351 VND				3,716,667 VND				1,964,441 VND			2,477,289 VND	2,482,797 VND	19,306,996 VND	13,252,500 VND	7,750,554 VND	2,566,600 VND			2,885,679 VND	235,695 VND	4,550,517 VND			13,252,500 VND	3,242,725 VND	1,277,496 VND	2,704,500 VND	175,976 VND	196,006 VND	275,798 VND
Days to ShipSố ngày giao hàng	2 Day(s) or more	8 Day(s) or more	Quote	Quote	4 Day(s) or more	6 Day(s) or more	4 Day(s) or more	46 Day(s) or more	4 Day(s) or more	4 Day(s) or more	Quote	Quote	6 Day(s)	Quote	6 Day(s) or more	Quote	Quote	10 Day(s) or more	Quote	46 Day(s) or more	46 Day(s) or more	Quote	Same day	46 Day(s) or more	46 Day(s) or more	4 Day(s) or more	6 Day(s) or more	5 Day(s) or more	9 Day(s)	6 Day(s) or more	6 Day(s) or more	Quote	Quote	4 Day(s) or more	4 Day(s) or more	6 Day(s) or more	Quote	Quote	9 Day(s)	6 Day(s) or more	4 Day(s) or more	4 Day(s) or more	6 Day(s) or more	4 Day(s) or more	6 Day(s) or more
Application	Probe / Parts	Standard Type	Standard Type / Lever Type (Indicator)	Standard Type	Probe	linear gauge	Standard Type	Standard Type	Lever Type (Indicator)	Thickness type	Parts	Standard Type	Caliper Type	-	Probe	Lever Type (Indicator)	Standard Type	Parts	Standard Type	Standard Type	Lever Type (Indicator)	Lever Type (Indicator)	Standard Type	Standard Type	Lever Type (Indicator)	Lever Type (Indicator)	Thickness type	Caliper Type	Lever Type (Indicator)	Caliper Type	Thickness type	Parts	Standard Type	Lever Type (Indicator)	Probe	Thickness type	Parts	Standard Type	Standard Type	Lever Type (Indicator)	Standard Type	Standard Type	Probe	Probe	Probe
Scale interval minimal display(mm)	-	0.002 ～ 0.01	0.01	0.01	-	0.001/0.01 switching	0.01	0.001 ～ 0.01	0.001 ～ 0.01	0.01	-	-	0.01	-	-	-	0.01	-	-	-	-	-	0.01	-	-	0.002 ～ 0.01	0.01	0.005 ～ 0.05	-	0.01	0.01	-	0.001 ～ 0.01	0.002 ～ 0.01	-	0.001	-	0.001 ～ 0.01	0.0005/0.001 switching	0.002 ～ 0.01	0.01	0.001	-	-	-
Display Method	-	Dial	Digital	Dial	-	Digital	Dial	Dial	Dial	Dial	-	Dial	Digital	-	-	Digital	Dial	-	Digital	Dial	Digital	Digital	Digital	Digital	Digital	Dial	Dial	Dial	Digital	Dial	Dial	-	Dial	Dial	-	Dial	-	Dial	Digital	Dial	Dial	Dial	-	-	-
Maximum Measurement Length (Range Selection)(mm)	-	0–1 ～ 1.1 to 5	-	6~20 ～ 21 to 50	-	6~20	0–1 ～ 6~20	1.1 to 5 ～ 6~20	0–1 ～ 1.1 to 5	6~20	-	-	-	0~12.7	-	-	1.1 to 5	-	-	-	-	-	6~20	-	-	0–1	6~20	-	-	21 to 50 ～ 101 or More	6~20	-	0–1 ～ 51 to 100	0–1	-	0–1 ～ 1.1 to 5	-	0–1 ～ 1.1 to 5	21 to 50	0–1	1.1 to 5 ～ 6~20	0–1 ～ 1.1 to 5	-	-	-
Waterproof Function	-	NA	NA	Available / NA	-	-	Available	NA	Available	-	-	-	Available	Available	-	-	-	-	-	-	-	-	NA	-	-	Available	-	Available	-	-	-	-	NA	-	-	-	-	Available	NA	-	-	Available	-	-	-
Output terminal for measuring data: with or without	-	NA	-	NA	-	-	-	NA	-	-	-	-	-	-	-	-	-	-	-	-	-	-	NA	-	-	-	-	-	-	-	-	-	NA	-	-	-	-	NA	Available	-	-	-	-	-	-
Scale type	-	Continuous Scale / Balance Scale	-	Continuous Scale / Reverse Scale	-	-	Continuous Scale / Reverse Scale	Continuous Scale / Balance Scale	Balance Scale	Continuous Scale	-	-	-	-	-	-	Balance Scale	-	-	-	-	-	-	-	-	Balance Scale	Continuous Scale	-	-	Continuous Scale	Continuous Scale	-	Continuous Scale / Balance Scale	Balance Scale	-	Continuous Scale	-	Continuous Scale / Balance Scale	-	Balance Scale	Continuous Scale	Continuous Scale / Balance Scale	-	-	-
Calibration Certificate	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-

BrandNhãn hiệu
Product SeriesDòng sản phẩm

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
BrandNhãn hiệu	MITUTOYO	MITUTOYO	MITUTOYO	MITUTOYO	OZAKI MFG (PEACOCK)	OZAKI MFG (PEACOCK)	OZAKI MFG (PEACOCK)	MITUTOYO	OZAKI MFG (PEACOCK)	OZAKI MFG (PEACOCK)	MITUTOYO	MITUTOYO	KROEPLIN	MITUTOYO	OZAKI MFG (PEACOCK)	MITUTOYO	MITUTOYO	MITUTOYO	MITUTOYO	MITUTOYO	MITUTOYO	MITUTOYO	NIIGATA SEIKI (SK)	MITUTOYO	MITUTOYO	OZAKI MFG (PEACOCK)	OZAKI MFG (PEACOCK)	KROEPLIN	MITUTOYO	TECLOCK	OZAKI MFG (PEACOCK)	MITUTOYO	MITUTOYO	TECLOCK	OZAKI MFG (PEACOCK)	OZAKI MFG (PEACOCK)	MITUTOYO	MITUTOYO	MITUTOYO	MAHR	TECLOCK	OZAKI MFG (PEACOCK)	OZAKI MFG (PEACOCK)	OZAKI MFG (PEACOCK)	OZAKI MFG (PEACOCK)
Product SeriesDòng sản phẩm	Dial Gauge Stylus	Small Dial Gauge 1 Series, Outer Frame Diameter φ31 mm, φ36 mm, φ40 mm Type	Dial Gauge, ABSOLUTE Digimatic Indicator ID-CX SERIES 543 - Standard Type	Regular Dial Gauge 2 Series, Long Stroke Type	Dial Gauge, Needle Gauge Head	Dial Gauge, Digital Gauge	Standard Shaped Dial Gauge (Scale Interval: 0.01 mm)	Dial Gauge SERIES 2 - Standard Type, 0.01mm And 0.001 Graduation	Dial Gauge, New Pic-test (No Clutch Type, PCN Type)	Dial Gauge, Dial Thickness Gauge (0.01 mm Type)	Dial Gauge, Magnetic Stands Series 7	Dial Test Indicator SERIES 513 — Universal Type(Measuring Range: 0.8mm)	Caliper Gauge	Dial Gauge, ABSOLUTE Digimatic Indicator ID-SX Series 543(Measuring force(N): 1.5 or less)	XT-5 Needle Measurement Probe	ABSOLUTE Digimatic Indicator ID-C SERIES 543 — Bore Gage Type	Dial Gauge Flat Back Cover with Handles	Dial Gauge Extension Rod	Dial Gauge, ABSOLUTE Digimatic Indicator ID-SX Series 543(Measuring force(N): 2.5 or less)	SERIES 1 — Compact Type, Small Diameter(Measuring Range: 0.025-0.1inch)	Dial Gauge, ABSOLUTE Digimatic Indicator ID-CX Series 543 — Standard Type(Measuring Range: 0.5-2inch)	ABSOLUTE Digimatic Indicator ID-SX SERIES 543	Dial Gauge, Digital Indicator	Dial Gauge, ABSOLUTE Digimatic Indicator ID-CX Series 543	ABSOLUTE Digimatic Indicator ID-C SERIES 543 — Calculation Type	Dial Gauge, Pictest (Switch Lever Type, PC Series)	Dial Pipe Gauge	Caliper Gauge	Dial Gauge, Digimatic Indicator ID-H Series 543	Inner Dial Caliper Gauge	Dial Gauge, Dial Lens Gauge	Contact Points - Flat point	Large Dial Gauge, 3/4 Series Long Stroke	Lever Test (Lever Swap Type)	Measuring Joint	Dial Gauge, Dial Thickness Gauge (0.001 mm Type)	Dial Gauge, Contact Points - Needle point	Regular Dial Gauge 2 Series, Waterproof Type, Scale Interval 0.01 / 0.001 mm Type	Dial Gauge 543 Series, Digimatic Indicator ID-H	Lever Type Dial Gauge	Standard Dial Gauge	Standard Shaped Dial Gauge (Scale Interval: 0.001 mm)	Spherical Surface Probe	Slope Shaped Probe	Plain Type Probe

Loading...Tải…