(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.
Tel: 0222-361-1555
Email: cs@misumi.com.vn
8:00 - 17:00 (Mon - Sat)
Search by Category / Brand Tìm theo danh mục, nhãn hiệu
Search by Category Tìm theo danh mục
- Thể lệ và Giải thưởng cuộc thi "Thiết kế máy Tự động hóa 2025" do MISUMI Việt Nam tổ chức. Xem chi tiết.
- [Thông báo] Cập nhật địa chỉ kho tập kết hàng hóa tại khu vực miền Nam của MISUMI Việt Nam. Xem chi tiết.
[Announcement] Update on warehouse address in the Southern region of MISUIMI Vietnam. See more.
Straight Shank / End Mill Shank Drills (Carbide)（work material：high hardness steel）
Brand |
|
|---|---|
| CAD |
|
| Days to Ship |
|
81 itemsMặt hàng
- Sort By
-
You can add up to 6 items per a category to the compare list.
NACHI(FUJIKOSHI)
180° flat multifunctional carbide drill.[Features]· Reduces hole expansion thanks to its double margins and 2-step cutting edge tip shape.· Capable of producing an accurate counter-bore surface with one shot.· Aqua EX coating improves heat and wear resistance, providing long life.[Applications]· Can support a wide range of applications such as countersinking on inclined surfaces, correction of eccentric bores, burr-free machining of thin plates, etc.
Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 0.5 ～ 20 47 ～ 145 1.65 ～ 90 high hardness steel[○] End Mill Shank / straight shank Carbide NA Available Other From: 1,210,000 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more 
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Standard Solid Drill with Coating
ATOM
ADS standard type with a TiAlN coating achieves a long life and consistent machining. It is also possible to drill hardened steel of up to 50 HRC, for which machining was difficult with standard non-coated products.
Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 0.3 ～ 6 30 ～ 80 4 ～ 40 high hardness steel[◎] straight shank Carbide NA Available TiAlN From: 468,586 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Aqua Drill EX Starting AQDEXST
NACHI(FUJIKOSHI)
[Features]· Highly accurate positioning is possible with good bite.· A multi-function type capable of centering, chamfering and V-grooving.
Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 3 ～ 20 48 ～ 131 9 ～ 40 high hardness steel[○] straight shank Carbide NA Available For General Steels (AlCrN, etc.) From: 1,418,252 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Micro Drill "NEO PRO" Long Blades
ATOM
A new series that achieves stable long life machining developed for thin hole machining on steel. A coated drill supporting a wide range of materials from mild steel to high hardness steel (HRC 50).
Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 0.03 ～ 3 38 ～ 65 0.6 ～ 40 high hardness steel[○] End Mill Shank Carbide NA Available For General Steels (AlCrN, etc.) From: 944,057 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
NACHI(FUJIKOSHI)
A drill that is difficult to break and stable for machining.[Features]· Employs cemented carbide ideal for small diameter hole drilling.· A drill with high rigidity is used.· The cutting load has been reduced by circumferential clearance and thinning.[Applications]· Hard to break and capable of stable processing thanks to the high-rigidity shape and the use of carbide alloy ideal for small diameter drilling work.
Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 0.2 ～ 1.99 38 ～ 47 2.5 ～ 15 high hardness steel[◎] End Mill Shank Carbide NA Available Other From: 544,333 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Aqua Drill EX Oil Hole 3D AQDEXOH3D
NACHI(FUJIKOSHI)
Aqua Drill EX series solid carbide drills with internal coolant.[Features]· Aqua Drill EX based new flute shape adopted to achieve excellent chipping breakup.· Aqua EX coating achieves stable long life.[Applications]· Stable processing of mild steel to high hardness materials.
Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 3 ～ 16 68 ～ 146 17 ～ 80 high hardness steel[◎] End Mill Shank / straight shank Carbide Available Available Other From: 2,391,126 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Micro Drill "NEO PRO" Short Blades
ATOM
A new series that achieves stable long life machining developed for thin hole machining on steel. A coated drill supporting a wide range of materials from mild steel to high hardness steel (HRC 50).
Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 0.1 ～ 3 38 0.6 ～ 12 high hardness steel[○] End Mill Shank Carbide NA Available For General Steels (AlCrN, etc.) From: 719,796 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Micro Drill "NEO PRO" Standard Blade Length
ATOM
A new series that achieves stable long life machining developed for thin hole machining on steel. A coated drill supporting a wide range of materials from mild steel to high hardness steel (HRC 50).
Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 0.03 ～ 3 38 ～ 50 0.3 ～ 25 high hardness steel[○] End Mill Shank Carbide NA Available For General Steels (AlCrN, etc.) From: 719,796 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
NACHI(FUJIKOSHI)
Carbide universal drill capable of stable high efficiency machining across a wide range of speeds from medium-low to high speed.[Features]· Shape of the new cutting edge greatly improves chip discharge performance.· The cutting resistance is reduced to provide stable machining even on small machines.· A special lubrication function film is provided on the surface layer of the AlCrSi coating to improve the lubricity, heat resistance and abrasion resistance, thereby prolonging the service life.[Applications]· The unique thinning shape increases biting and reduces cutting resistance.· Stable cutting performance even with thin work materials and small low-rigidity processing machines.
Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 2 ～ 16 45 ～ 112 8 ～ 55 high hardness steel[◎] End Mill Shank / straight shank Carbide - Available Other From: 1,025,000 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
AQDEXZOH3D Aqua Drill EX Flat Oil Hole 3D
NACHI(FUJIKOSHI)
A 180° flat, internally-lubricated type multi-functional carbide drill.[Features]· Allows high efficiency flat drilling up to hole depth 3D.· A drill with oil hole that supports stainless steel.· Reduces hole expansion thanks to its double margins and 2-step cutting edge tip shape.· Capable of producing an accurate counter-bore surface with one shot.· Aqua EX coating improves heat and wear resistance, providing long life.[Applications]· A multi-functional drill that is capable of supporting a wide range of applications such as countersinking on inclined surfaces, correction of eccentric bores, burr-free machining of thin plates, etc.
Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 3 ～ 16 68 ～ 146 2 ～ 72 high hardness steel[○] End Mill Shank / straight shank Carbide Available Available Other From: 2,656,894 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Aqua Drill EX Oil Hole 3-Flute 5D AQDEXOH3F5D
NACHI(FUJIKOSHI)
[Features]· 3-flute cutting edge with excellent cutting balance ideal for high-precision machining.· Capable of highly-efficient hole drilling up to 5 times the drill diameter.
Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 3 ～ 16 78 ～ 194 28 ～ 128 high hardness steel[○] straight shank Carbide Available Available For General Steels (AlCrN, etc.) From: 3,460,740 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Aqua Drill EX Oil Hole 5D AQDEXOH5D
NACHI(FUJIKOSHI)
Aqua Drill EX series solid carbide drills with internal coolant.[Features]· Product lineup is for 3D, 5D and 8D boring depths.· Aqua Drill EX based new flute shape adopted to achieve excellent chipping breakup.· Aqua EX coating achieves stable long life.· Capable of stable wet processing and MQL processing.· For highly-efficient hole drilling up to 5 times the drill diameter.[Applications]· Ideal for stable processing of mild steel to high hardness materials, as well as work materials with difficult chip processing.
Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 1 ～ 16 56 ～ 194 8 ～ 128 high hardness steel[◎] End Mill Shank / straight shank Carbide Available Available Other From: 2,785,966 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Aqua Drill EX Oil Hole 8D AQDEXOH8D
NACHI(FUJIKOSHI)
Aqua Drill EX series solid carbide drills with internal coolant.[Features]· Product lineup is for 3D, 5D and 8D boring depths.· Aqua Drill EX based new flute shape adopted to achieve excellent chipping breakup.· Aqua EX coating achieves stable long life.[Applications]· Stable processing of mild steel to high hardness materials.
Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 3 ～ 16 81 ～ 242 33 ～ 176 high hardness steel[◎] End Mill Shank / straight shank Carbide Available Available Other From: 3,347,773 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
GP Drill Bit, Regular 10D, ALT Coating
IWATA TOOL
Allows non-step boring up to 3D hole depth (up to 7D in some situations). High precision and super long life.
Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 0.3 ～ 3 40 ～ 60 3.7 ～ 36.5 high hardness steel[○] End Mill Shank Carbide NA Available TiAlN From: 786,878 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Micro Drill "NEO PRO" Semi-Long Blades
ATOM
A series that achieves stable long life developed for thin hole machining on steel. A coated drill supporting a wide range of materials from mild steel to high hardness steel (HRC 50).
Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 0.04 ～ 0.99 38 0.6 ～ 11 high hardness steel[○] End Mill Shank Carbide NA Available For General Steels (AlCrN, etc.) From: 854,549 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Solid Carbide Ultra Small Size UVM Drills (5D Type)_UVM-DRL-5D
OSG
Ultra-small diameter UVM drill 5D type to achieve drilling with a minimum diameter of ø0.02.
Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 0.02 ～ 0.08 38 0.12 ～ 0.48 high hardness steel[◎] End Mill Shank Carbide NA Available Other From: 2,781,953 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
End Mill Shank Drill 3 × D, with Oil Hole RT100U 5510
GUHRING
[Features]· Internal lubrication enables high performance drilling without steps.
Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 3 ～ 20 62 ～ 131 20 ～ 79 high hardness steel[○] End Mill Shank Carbide Available Available Other From: 2,128,309 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
End Mill Shank Type 5xD RT100U 5515
GUHRING
[Features]· Supports a wide range of machining and enables high-efficiency, high-speed machining.
Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 3 ～ 20 66 ～ 153 28 ～ 101 high hardness steel[○] End Mill Shank Carbide NA Available Other From: 1,907,196 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
YG 1
Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type - - - high hardness steel[○] End Mill Shank Carbide NA Available TiAlN From: 719,192 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
WIDIN
[Features]· Supports highly rigid work materials and long life by dedicated drilling super fine 0.5μ material and TiALN-HH (titanium aluminum and silicone type) coating that provides high surface rigidity, high heat resistant oxidation temperature and lubricant performance.
Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 3.2 ～ 8 60 ～ 79 20 ～ 40 high hardness steel[○] - Carbide - - Other From: 800,975 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
NACHI(FUJIKOSHI)
Carbide universal drill capable of stable high efficiency machining across a wide range of speeds from medium-low to high speed.[Features]· Shape of the new cutting edge greatly improves chip discharge performance.· The cutting resistance is reduced to provide stable machining even on small machines.· A special lubrication function film is provided on the surface layer of the AlCrSi coating.· Longer life by improving lubricity and heat/abrasion resistance.· The unique thinning shape increases biting and reduces cutting resistance.[Applications]· Ideal for thin work materials and small low-rigidity processing machines.
Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 2.1 ～ 16 49 ～ 160 17 ～ 96 high hardness steel[◎] End Mill Shank / straight shank Carbide NA Available Other From: 1,880,639 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
NACHI(FUJIKOSHI)
Carbide drill capable of high efficiency machining of high-hardness steel of 50 to 70 HRC.[Features]· It uses carbide alloy ideal for high-hardness steel machining and AquaCoat, which has excellent heat resistance and abrasion resistance.· Wear resistance and chipping resistance are greatly improved.· Uses a thick core and weak torsion.· The high rigidity makes it resistant against vibration as well, preventing damage from microchipping, etc.[Applications]· High performance machining of 50 to 70 HRC high hardness steel is possible.
Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 2 ～ 12 44 ～ 108 12 ～ 51 high hardness steel[◎] End Mill Shank / straight shank Carbide NA Available Other From: 629,109 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Micro Drill, for Stainless Steel
ATOM
Realizes a long life with mild steel, hard-to-cut materials, SUS304, Kovar, inconel, Hastelloy, pure nickel, etc. High-rigidity design which prevents breakage of the drill when machining difficult-to-cut materials.
Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 0.1 ～ 3 38 ～ 45 1 ～ 15 high hardness steel[○] End Mill Shank Carbide NA Available For General Steels (AlCrN, etc.) From: 770,550 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
End Mill Shank Drill 5 × D with Oil Hole RT100U 5511
GUHRING
[Features]· Internal lubrication enables high performance drilling without steps.
Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 3 ～ 20 66 ～ 153 28 ～ 101 high hardness steel[○] End Mill Shank Carbide Available Available Other From: 2,714,500 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Aqua Drill EX Flat Regular AQDEXZR
NACHI(FUJIKOSHI)
180° flat multifunctional carbide drill.[Features]· Reduces hole expansion thanks to its double margins and 2-step cutting edge tip shape.· Capable of producing an accurate counter-bore surface with one shot.· Aqua EX coating improves heat and wear resistance, providing long life.· Flat drill for 4D boring depth with excellent drilling performance.· A centering hole or guide hole is required.[Applications]· Countersinking on inclined surfaces and correction of eccentric bores.· Multifunctional drill that can be used for a wide range of applications, such as thin plate burrless processing, etc.
Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 3 ～ 20 60 ～ 195 19 ～ 126 high hardness steel[○] - Carbide - Available Other From: 1,686,673 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
ATOM
Drill for precision and multiporous fine hole drilling with a minimum diameter of ø0.04 (diameter 0.04 mm). [Features] · Blade diameter tolerance +0 to -0.005. [Applications] · A wide range of materials are applicable, from general steel through to non-ferrous metals and resin.
Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 0.04 ～ 0.99 38 0.6 ～ 11 high hardness steel[○] End Mill Shank Carbide NA NA Non-Coated From: 698,944 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
NACHI(FUJIKOSHI)
3-flute carbide drill capable of high-precision drilling and reamer-less processing.[Features]· High-precision drilling is possible due to the 3-flute cutting edge excellent in cutting balance. It also supports reamer-less processing.· Aqua Drill 3-Flute has a proprietary thinning shape and good sharpness for minimal cutting resistance.· Highly lubricating aqua coating and groove shape for excellent chipping discharge without clogging, enabling consistent hole drilling.[Applications]· High-precision drilling is made possible by the 3-flute cutting edge with excellent cutting balance and negative corner with high centrality.
Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 3 ～ 16 48 ～ 144 16 ～ 80 high hardness steel[◎] End Mill Shank / straight shank Carbide NA Available Other From: 686,931 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
WXS Coated Carbide Drill for High Hardened Steel (70HRC)_WH70-DRL
OSG
Optimal for machining 55 to 70 HRC. This is a drill for ultra-high hardness steel that combines stable machining with cutting edge shape and coating for high hardness steel in a high dimension.
Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 2 ～ 12 42 ～ 120 12 ～ 76 high hardness steel[◎] End Mill Shank / straight shank Carbide NA Available Other From: 1,709,493 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Hole Drilling, Sigma Drill-Hard, DZ-DHS-02
DIJET
tool with excellent wear resistance. [Features]・High body rigidity・High breakage and chipping resistance・High heat and abrasion resistance・Significantly improved chipping resistance
Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 2 ～ 2.5 55 12 ～ 16 high hardness steel[◎] End Mill Shank Carbide NA Available TiAlN From: 1,374,888 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
CoroDrill Delta-C, Carbide Solid Drill
SANDVIK
Solid drill providing high accuracy surface roughness ideal for drilling any kind of workpiece.
Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 13 ～ 14.5 124 ～ 133 56 ～ 59 high hardness steel[○] End Mill Shank Carbide Available Available TiAlN From: 11,556,586 VND Days to Ship: Số ngày giao hàng: 9 Day(s)
9 Day(s)
-
You can add up to 6 items per a category to the compare list.
AQDEXZOH5D Aqua Drill EX Flat Oil Hole 5D
NACHI(FUJIKOSHI)
A 180° flat, internally-lubricated type multi-functional carbide drill.[Features]· Allows high efficiency flat drilling up to hole depth 5D.· A centering hole or guide hole is required.· Reduces hole expansion thanks to its double margins and 2-step cutting edge tip shape.· Capable of producing an accurate counter-bore surface with one shot.· Aqua EX coating improves heat and wear resistance, providing long life.[Applications]· A multi-functional drill that is capable of supporting a wide range of applications such as countersinking on inclined surfaces, correction of eccentric bores, burr-free machining of thin plates, etc.
Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 3 ～ 16 74 ～ 178 20 ～ 104 high hardness steel[○] End Mill Shank / straight shank Carbide Available Available Other From: 3,123,316 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Aqua Drill EX Flat Long Shank AQDEXZLS
NACHI(FUJIKOSHI)
180° flat multifunctional carbide drill.[Features]· Flat drill 10D type with excellent drilling performance.· Reduces hole expansion thanks to its double margins and 2-step cutting edge tip shape.· Capable of producing an accurate counter-bore surface with one shot.· Aqua EX coating improves heat and wear resistance, providing long life.[Applications]· A multi-functional drill that is capable of supporting a wide range of applications such as countersinking on inclined surfaces, correction of eccentric bores, burr-free machining of thin plates, etc.
Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 3 ～ 20 100 ～ 250 14 ～ 90 high hardness steel[○] End Mill Shank Carbide Available / NA Available Other From: 1,964,244 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Aqua Drill EX Oil Hole 3-Flute 3D AQDEXOH3F3D
NACHI(FUJIKOSHI)
[Features]· 3-flute cutting edge with excellent cutting balance ideal for high-precision machining.· Capable of highly-efficient hole drilling up to 3 times the drill diameter.
Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 3 ～ 16 68 ～ 146 17 ～ 80 high hardness steel[○] straight shank Carbide Available Available For General Steels (AlCrN, etc.) From: 2,916,110 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
TS Coated Carbide Drill for High-Hardness Steel Machining, With Corner Radius / Stub
MISUMI
[Features]·Weak helix and large core diameter improve tool rigidity·Achieves outstanding strength by adopting straight cutting edge·Cutting edge chipping is suppressed by corner radius processing, and cracks at the bottom of blind holes in workpieces are also suppressed·Ideal for machining high hardness steel of HRC40 to 60·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
- Volume Discount
Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 3 ～ 13 62 ～ 107 20 ～ 60 high hardness steel[◎] End Mill Shank Carbide NA Available - From: 1,368,534 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
TS Coated Carbide Drill for High-Hardness Steel Machining, Stub Model, Regular
MISUMI
[Features]·Weak helix angle and high core diameter improve tool rigidity·Achieves outstanding strength by adopting straight cutting edge·Ideal for machining high hardness steel of HRC40 to 60·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.
- Volume Discount
Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 3 ～ 13 62 ～ 124 20 ～ 77 high hardness steel[◎] End Mill Shank Carbide NA Available - From: 1,213,185 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
TS Coated Carbide Drill for High-Hardness Steel Machining, Straight Shank / Stub, Regular
MISUMI
[Features]·Weak helix angle and high core diameter improve tool rigidity·Achieves outstanding strength by adopting straight cutting edge·Ideal for machining high hardness steel of HRC40 to 60·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.
- Volume Discount
Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 3 ～ 13 46 ～ 137 16 ～ 78 high hardness steel[◎] straight shank Carbide NA Available - From: 1,213,185 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
TS Coated Carbide Drill for High-Hardness Steel Machining, Small Diameter / Stub / Regular
MISUMI
A small radius type of the high-hardness steel series
- Volume Discount
Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 0.8 ～ 3 47 ～ 67 6 ～ 27 high hardness steel[○] End Mill Shank Carbide NA Available - From: 970,256 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
NACHI(FUJIKOSHI)
A carbide drill that demonstrates outstanding performance in dry processing and high speed wet processing.[Features]· Adopts Aquacoat with excellent heat resistance and rich lubrication with the work material.· Aqua coating and groove shape for excellent chipping discharge, enabling consistent hole drilling.· Chipping resistance and corner abrasion resistance are improved due to the special cutting edge shape.· High-speed wet machining is 2 to 3 times that of other companies' products, with dry machining efficiency equal to or greater than that of wet machining.[Applications]· Ideal for high-speed and long-life machining for anything from raw materials to high-hardness steel.
Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 3.7 ～ 10 56 ～ 110 24 ～ 60 high hardness steel[◎] End Mill Shank / straight shank Carbide NA Available Other From: 2,111,587 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Aqua Drill, Stub, Carbide Drill, AQDS
NACHI(FUJIKOSHI)
A carbide drill that demonstrates outstanding performance in dry processing and high speed wet processing.[Features]· Adopts Aquacoat with excellent heat resistance and rich lubrication with the work material.· Aqua coating and groove shape for excellent chipping discharge, enabling consistent hole drilling.· Chipping resistance and corner abrasion resistance are improved due to the special cutting edge shape.· High-speed wet machining is 2 to 3 times that of other companies' products, with dry machining efficiency equal to or greater than that of wet machining.[Applications]· Ideal for high-speed and long-life machining for anything from raw materials to high-hardness steel.· Drill for dry machining.
Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 4 ～ 12.5 54 ～ 110 22 ～ 51 high hardness steel[◎] End Mill Shank / straight shank Carbide NA Available Other From: 1,801,361 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
OSG
Achieves 20D deep drilling of high hardness mold materials (45 to 55 HRC) with high stability, long life, and high efficiency
Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 6 ～ 10 190 ～ 280 140 ～ 230 high hardness steel[◎] straight shank Carbide Available Available Other From: 9,276,080 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Solid Carbide Drills TiAlN coated 3 Flutes Stub with Long Neck for Hardened Steels_FHL-GDTS
OSG
Enables highly accurate machining of ultra-deep holes of 10 to 20 D in hardened steel which conventionally was only possible via electric discharge machining, realizing a great reduction in total drilling time.
Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 1 ～ 3 57 ～ 65 5 ～ 15 high hardness steel[◎] End Mill Shank / straight shank Carbide NA Available Other From: 1,850,934 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Solid Carbide Drills TiAlN coated Stub for Hardened Steels_FH-GDS
OSG
Developed for machining small diameter holes in hardened steel, it is suitable for high-precision and long-life machining of shallow holes (up to 3D or so)
Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 0.3 ～ 2 38 ～ 46 1.6 ～ 12 high hardness steel[◎] End Mill Shank Carbide Available Available Other From: 1,432,708 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Solid Carbide Drills TiAlN coated Medium for Hardened Steels_FH-GDN
OSG
Developed for machining small diameter holes in hardened steel, it is capable of machining deep holes (up to 7D or so)
Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 0.3 ～ 2 38 ～ 50 2.5 ～ 18 high hardness steel[◎] End Mill Shank Carbide NA Available Other From: 1,571,986 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Solid Carbide Ultra Small Size UVM Drills (10D Type)_UVM-DRL-10D
OSG
Because it uses carbide materials, it has both high hardness and elastic modulus, making it possible to drill extremely small holes in general steel, heat-treated steel, and high hardness steel.
Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 0.02 ～ 0.08 38 0.22 ～ 0.88 high hardness steel[◎] End Mill Shank Carbide NA Available Other From: 3,279,970 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Solid Carbide Ultra Small Size UVM Drills (Starting Drills)_UVM-LDS
OSG
Supports high-precision drilling in collaboration with UVM-DRL.
Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 0.05 38 0.075 high hardness steel[◎] End Mill Shank Carbide NA Available Other From: 6,248,145 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
| BrandNhãn hiệu |
|---|
| Product SeriesDòng sản phẩm |
| From |
| Days to ShipSố ngày giao hàng |
| Hole diameter (drill diameter) D(mm) |
| Overall Length L(mm) |
| Groove Length L(mm) |
| work material |
| Shank Type |
| Tool Material Type |
| With/without Oil Hole |
| Coating Y/N |
| Coating Type |
You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list.  | |
| BrandNhãn hiệu | NACHI(FUJIKOSHI) | ATOM | NACHI(FUJIKOSHI) | ATOM | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | ATOM | ATOM | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | IWATA TOOL | ATOM | OSG | GUHRING | GUHRING | YG 1 | WIDIN | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | ATOM | GUHRING | NACHI(FUJIKOSHI) | ATOM | NACHI(FUJIKOSHI) | OSG | DIJET | SANDVIK | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | MISUMI | MISUMI | MISUMI | MISUMI | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | OSG | OSG | OSG | OSG | OSG | OSG |
| Product SeriesDòng sản phẩm | Solid Carbide Ultra Small Size UVM Drills (5D Type)_UVM-DRL-5D | WXS Coated Carbide Drill for High Hardened Steel (70HRC)_WH70-DRL | TS Coated Carbide Drill for High-Hardness Steel Machining, With Corner Radius / Stub | TS Coated Carbide Drill for High-Hardness Steel Machining, Stub Model, Regular | TS Coated Carbide Drill for High-Hardness Steel Machining, Straight Shank / Stub, Regular | TS Coated Carbide Drill for High-Hardness Steel Machining, Small Diameter / Stub / Regular | Solid Carbide Drills TiAlN coated 3 Flutes Stub with Long Neck for Hardened Steels_FHL-GDTS | Solid Carbide Drills TiAlN coated Stub for Hardened Steels_FH-GDS | Solid Carbide Drills TiAlN coated Medium for Hardened Steels_FH-GDN | Solid Carbide Ultra Small Size UVM Drills (10D Type)_UVM-DRL-10D | Solid Carbide Ultra Small Size UVM Drills (Starting Drills)_UVM-LDS | ||||||||||||||||||||||||||||||||||
| From | 1,210,000 VND | 468,586 VND | 1,418,252 VND | 944,057 VND | 544,333 VND | 2,391,126 VND | 719,796 VND | 719,796 VND | 1,025,000 VND | 2,656,894 VND | 3,460,740 VND | 2,785,966 VND | 3,347,773 VND | 786,878 VND | 854,549 VND | 2,781,953 VND | 2,128,309 VND | 1,907,196 VND | 719,192 VND | 800,975 VND | 1,880,639 VND | 629,109 VND | 770,550 VND | 2,714,500 VND | 1,686,673 VND | 698,944 VND | 686,931 VND | 1,709,493 VND | 1,374,888 VND | 11,556,586 VND | 3,123,316 VND | 1,964,244 VND | 2,916,110 VND | 1,368,534 VND | 1,213,185 VND | 1,213,185 VND | 970,256 VND | 2,111,587 VND | 1,801,361 VND | 9,276,080 VND | 1,850,934 VND | 1,432,708 VND | 1,571,986 VND | 3,279,970 VND | 6,248,145 VND |
| Days to ShipSố ngày giao hàng | 4 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 4 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 4 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 9 Day(s) | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more |
| Hole diameter (drill diameter) D(mm) | 0.5 ～ 20 | 0.3 ～ 6 | 3 ～ 20 | 0.03 ～ 3 | 0.2 ～ 1.99 | 3 ～ 16 | 0.1 ～ 3 | 0.03 ～ 3 | 2 ～ 16 | 3 ～ 16 | 3 ～ 16 | 1 ～ 16 | 3 ～ 16 | 0.3 ～ 3 | 0.04 ～ 0.99 | 0.02 ～ 0.08 | 3 ～ 20 | 3 ～ 20 | - | 3.2 ～ 8 | 2.1 ～ 16 | 2 ～ 12 | 0.1 ～ 3 | 3 ～ 20 | 3 ～ 20 | 0.04 ～ 0.99 | 3 ～ 16 | 2 ～ 12 | 2 ～ 2.5 | 13 ～ 14.5 | 3 ～ 16 | 3 ～ 20 | 3 ～ 16 | 3 ～ 13 | 3 ～ 13 | 3 ～ 13 | 0.8 ～ 3 | 3.7 ～ 10 | 4 ～ 12.5 | 6 ～ 10 | 1 ～ 3 | 0.3 ～ 2 | 0.3 ～ 2 | 0.02 ～ 0.08 | 0.05 |
| Overall Length L(mm) | 47 ～ 145 | 30 ～ 80 | 48 ～ 131 | 38 ～ 65 | 38 ～ 47 | 68 ～ 146 | 38 | 38 ～ 50 | 45 ～ 112 | 68 ～ 146 | 78 ～ 194 | 56 ～ 194 | 81 ～ 242 | 40 ～ 60 | 38 | 38 | 62 ～ 131 | 66 ～ 153 | - | 60 ～ 79 | 49 ～ 160 | 44 ～ 108 | 38 ～ 45 | 66 ～ 153 | 60 ～ 195 | 38 | 48 ～ 144 | 42 ～ 120 | 55 | 124 ～ 133 | 74 ～ 178 | 100 ～ 250 | 68 ～ 146 | 62 ～ 107 | 62 ～ 124 | 46 ～ 137 | 47 ～ 67 | 56 ～ 110 | 54 ～ 110 | 190 ～ 280 | 57 ～ 65 | 38 ～ 46 | 38 ～ 50 | 38 | 38 |
| Groove Length L(mm) | 1.65 ～ 90 | 4 ～ 40 | 9 ～ 40 | 0.6 ～ 40 | 2.5 ～ 15 | 17 ～ 80 | 0.6 ～ 12 | 0.3 ～ 25 | 8 ～ 55 | 2 ～ 72 | 28 ～ 128 | 8 ～ 128 | 33 ～ 176 | 3.7 ～ 36.5 | 0.6 ～ 11 | 0.12 ～ 0.48 | 20 ～ 79 | 28 ～ 101 | - | 20 ～ 40 | 17 ～ 96 | 12 ～ 51 | 1 ～ 15 | 28 ～ 101 | 19 ～ 126 | 0.6 ～ 11 | 16 ～ 80 | 12 ～ 76 | 12 ～ 16 | 56 ～ 59 | 20 ～ 104 | 14 ～ 90 | 17 ～ 80 | 20 ～ 60 | 20 ～ 77 | 16 ～ 78 | 6 ～ 27 | 24 ～ 60 | 22 ～ 51 | 140 ～ 230 | 5 ～ 15 | 1.6 ～ 12 | 2.5 ～ 18 | 0.22 ～ 0.88 | 0.075 |
| work material | high hardness steel[○] | high hardness steel[◎] | high hardness steel[○] | high hardness steel[○] | high hardness steel[◎] | high hardness steel[◎] | high hardness steel[○] | high hardness steel[○] | high hardness steel[◎] | high hardness steel[○] | high hardness steel[○] | high hardness steel[◎] | high hardness steel[◎] | high hardness steel[○] | high hardness steel[○] | high hardness steel[◎] | high hardness steel[○] | high hardness steel[○] | high hardness steel[○] | high hardness steel[○] | high hardness steel[◎] | high hardness steel[◎] | high hardness steel[○] | high hardness steel[○] | high hardness steel[○] | high hardness steel[○] | high hardness steel[◎] | high hardness steel[◎] | high hardness steel[◎] | high hardness steel[○] | high hardness steel[○] | high hardness steel[○] | high hardness steel[○] | high hardness steel[◎] | high hardness steel[◎] | high hardness steel[◎] | high hardness steel[○] | high hardness steel[◎] | high hardness steel[◎] | high hardness steel[◎] | high hardness steel[◎] | high hardness steel[◎] | high hardness steel[◎] | high hardness steel[◎] | high hardness steel[◎] |
| Shank Type | End Mill Shank / straight shank | straight shank | straight shank | End Mill Shank | End Mill Shank | End Mill Shank / straight shank | End Mill Shank | End Mill Shank | End Mill Shank / straight shank | End Mill Shank / straight shank | straight shank | End Mill Shank / straight shank | End Mill Shank / straight shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | - | End Mill Shank / straight shank | End Mill Shank / straight shank | End Mill Shank | End Mill Shank | - | End Mill Shank | End Mill Shank / straight shank | End Mill Shank / straight shank | End Mill Shank | End Mill Shank | End Mill Shank / straight shank | End Mill Shank | straight shank | End Mill Shank | End Mill Shank | straight shank | End Mill Shank | End Mill Shank / straight shank | End Mill Shank / straight shank | straight shank | End Mill Shank / straight shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank |
| Tool Material Type | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide |
| With/without Oil Hole | NA | NA | NA | NA | NA | Available | NA | NA | - | Available | Available | Available | Available | NA | NA | NA | Available | NA | NA | - | NA | NA | NA | Available | - | NA | NA | NA | NA | Available | Available | Available / NA | Available | NA | NA | NA | NA | NA | NA | Available | NA | Available | NA | NA | NA |
| Coating Y/N | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | - | Available | Available | Available | Available | Available | NA | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available |
| Coating Type | Other | TiAlN | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | Other | Other | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | Other | Other | For General Steels (AlCrN, etc.) | Other | Other | TiAlN | For General Steels (AlCrN, etc.) | Other | Other | Other | TiAlN | Other | Other | Other | For General Steels (AlCrN, etc.) | Other | Other | Non-Coated | Other | Other | TiAlN | TiAlN | Other | Other | For General Steels (AlCrN, etc.) | - | - | - | - | Other | Other | Other | Other | Other | Other | Other | Other |
Loading...Tải…
ConfigureTạo
Specification/DimensionsĐặc điểm kỹ thuật / Kích thướcĐặc điểm kỹ thuật / Kích thước
-
Hole diameter (drill diameter) D(mm)
-
0～0.995
- 0
- 0.01
- 0.015
- 0.02
- 0.025
- 0.03
- 0.035
- 0.04
- 0.045
- 0.05
- 0.055
- 0.06
- 0.065
- 0.07
- 0.075
- 0.08
- 0.085
- 0.09
- 0.095
- 0.1
- 0.105
- 0.11
- 0.115
- 0.12
- 0.125
- 0.13
- 0.135
- 0.14
- 0.145
- 0.15
- 0.155
- 0.16
- 0.165
- 0.17
- 0.175
- 0.18
- 0.185
- 0.19
- 0.195
- 0.2
- 0.205
- 0.21
- 0.215
- 0.22
- 0.225
- 0.23
- 0.235
- 0.24
- 0.245
- 0.25
- 0.255
- 0.26
- 0.265
- 0.27
- 0.275
- 0.28
- 0.285
- 0.29
- 0.295
- 0.3
- 0.305
- 0.31
- 0.315
- 0.32
- 0.325
- 0.33
- 0.335
- 0.34
- 0.345
- 0.35
- 0.355
- 0.36
- 0.365
- 0.37
- 0.375
- 0.38
- 0.385
- 0.39
- 0.395
- 0.397
- 0.4
- 0.405
- 0.41
- 0.415
- 0.42
- 0.425
- 0.43
- 0.435
- 0.44
- 0.445
- 0.45
- 0.455
- 0.46
- 0.465
- 0.47
- 0.475
- 0.48
- 0.485
- 0.49
- 0.495
- 0.5
- 0.505
- 0.51
- 0.515
- 0.52
- 0.525
- 0.53
- 0.535
- 0.54
- 0.545
- 0.55
- 0.555
- 0.56
- 0.565
- 0.57
- 0.575
- 0.58
- 0.585
- 0.59
- 0.595
- 0.6
- 0.605
- 0.61
- 0.615
- 0.62
- 0.625
- 0.63
- 0.635
- 0.64
- 0.645
- 0.65
- 0.655
- 0.66
- 0.665
- 0.67
- 0.675
- 0.68
- 0.685
- 0.69
- 0.695
- 0.7
- 0.705
- 0.71
- 0.715
- 0.72
- 0.725
- 0.73
- 0.735
- 0.74
- 0.745
- 0.75
- 0.755
- 0.76
- 0.765
- 0.77
- 0.775
- 0.78
- 0.785
- 0.79
- 0.794
- 0.795
- 0.8
- 0.805
- 0.81
- 0.815
- 0.82
- 0.825
- 0.83
- 0.835
- 0.84
- 0.845
- 0.85
- 0.855
- 0.86
- 0.865
- 0.87
- 0.875
- 0.88
- 0.885
- 0.89
- 0.895
- 0.9
- 0.905
- 0.91
- 0.915
- 0.92
- 0.925
- 0.93
- 0.935
- 0.94
- 0.945
- 0.95
- 0.955
- 0.96
- 0.965
- 0.97
- 0.975
- 0.98
- 0.985
- 0.99
- 0.995
-
1～1.995
- 1
- 1/2(inch)
- 1/4(inch)
- 1/8(inch)
- 1/16(inch)
- 1/32(inch)
- 1/64(inch)
- 1.005
- 1.01
- 1.015
- 1.02
- 1.025
- 1.03
- 1.035
- 1.04
- 1.045
- 1.05
- 1.055
- 1.06
- 1.065
- 1.07
- 1.075
- 1.08
- 1.085
- 1.09
- 1.095
- 1.1
- 1.105
- 1.11
- 1.115
- 1.12
- 1.125
- 1.13
- 1.135
- 1.14
- 1.145
- 1.15
- 1.155
- 1.16
- 1.165
- 1.17
- 1.175
- 1.18
- 1.185
- 1.19
- 1.191
- 1.195
- 1.2
- 1.205
- 1.21
- 1.215
- 1.22
- 1.225
- 1.23
- 1.235
- 1.24
- 1.245
- 1.25
- 1.255
- 1.26
- 1.265
- 1.27
- 1.275
- 1.28
- 1.285
- 1.29
- 1.295
- 1.3
- 1.305
- 1.31
- 1.315
- 1.32
- 1.325
- 1.33
- 1.335
- 1.34
- 1.345
- 1.35
- 1.355
- 1.36
- 1.365
- 1.37
- 1.375
- 1.38
- 1.385
- 1.39
- 1.395
- 1.4
- 1.405
- 1.41
- 1.415
- 1.42
- 1.425
- 1.43
- 1.435
- 1.44
- 1.445
- 1.45
- 1.455
- 1.46
- 1.465
- 1.47
- 1.475
- 1.48
- 1.485
- 1.49
- 1.495
- 1.5
- 1.505
- 1.51
- 1.515
- 1.52
- 1.525
- 1.53
- 1.535
- 1.54
- 1.545
- 1.55
- 1.555
- 1.56
- 1.565
- 1.57
- 1.575
- 1.58
- 1.585
- 1.587
- 1.59
- 1.595
- 1.6
- 1.605
- 1.61
- 1.615
- 1.62
- 1.625
- 1.63
- 1.635
- 1.64
- 1.645
- 1.65
- 1.655
- 1.66
- 1.665
- 1.67
- 1.675
- 1.68
- 1.685
- 1.69
- 1.695
- 1.7
- 1.705
- 1.71
- 1.715
- 1.72
- 1.725
- 1.73
- 1.735
- 1.74
- 1.745
- 1.75
- 1.755
- 1.76
- 1.765
- 1.77
- 1.775
- 1.78
- 1.785
- 1.79
- 1.795
- 1.8
- 1.805
- 1.81
- 1.815
- 1.82
- 1.825
- 1.83
- 1.835
- 1.84
- 1.845
- 1.85
- 1.855
- 1.86
- 1.865
- 1.87
- 1.875
- 1.88
- 1.885
- 1.89
- 1.895
- 1.9
- 1.905
- 1.91
- 1.915
- 1.92
- 1.925
- 1.93
- 1.935
- 1.94
- 1.945
- 1.95
- 1.955
- 1.96
- 1.965
- 1.97
- 1.975
- 1.98
- 1.984
- 1.985
- 1.99
- 1.995
-
2～2.99
- 2
- 2.01
- 2.015
- 2.02
- 2.03
- 2.04
- 2.05
- 2.06
- 2.07
- 2.08
- 2.09
- 2.1
- 2.11
- 2.115
- 2.12
- 2.13
- 2.14
- 2.15
- 2.16
- 2.17
- 2.18
- 2.19
- 2.2
- 2.21
- 2.215
- 2.22
- 2.23
- 2.24
- 2.25
- 2.26
- 2.27
- 2.28
- 2.29
- 2.3
- 2.31
- 2.315
- 2.32
- 2.33
- 2.34
- 2.35
- 2.36
- 2.37
- 2.38
- 2.381
- 2.383
- 2.39
- 2.4
- 2.41
- 2.415
- 2.42
- 2.43
- 2.439
- 2.44
- 2.45
- 2.46
- 2.47
- 2.48
- 2.489
- 2.49
- 2.5
- 2.51
- 2.515
- 2.52
- 2.53
- 2.54
- 2.55
- 2.56
- 2.57
- 2.578
- 2.58
- 2.59
- 2.6
- 2.61
- 2.615
- 2.62
- 2.63
- 2.64
- 2.642
- 2.65
- 2.66
- 2.67
- 2.68
- 2.69
- 2.7
- 2.705
- 2.71
- 2.715
- 2.72
- 2.73
- 2.74
- 2.75
- 2.76
- 2.77
- 2.778
- 2.779
- 2.78
- 2.79
- 2.8
- 2.81
- 2.815
- 2.82
- 2.83
- 2.84
- 2.85
- 2.86
- 2.87
- 2.88
- 2.89
- 2.9
- 2.91
- 2.915
- 2.92
- 2.93
- 2.94
- 2.947
- 2.95
- 2.96
- 2.97
- 2.98
- 2.99
-
3～3.99
- 3
- 3/8(inch)
- 3/16(inch)
- 3/32(inch)
- 3/64(inch)
- 3.01
- 3.02
- 3.03
- 3.04
- 3.048
- 3.05
- 3.06
- 3.07
- 3.08
- 3.09
- 3.1
- 3.11
- 3.12
- 3.13
- 3.14
- 3.15
- 3.16
- 3.17
- 3.175
- 3.175
- 3.18
- 3.19
- 3.2
- 3.21
- 3.22
- 3.23
- 3.24
- 3.25
- 3.26
- 3.264
- 3.27
- 3.28
- 3.29
- 3.3
- 3.31
- 3.32
- 3.33
- 3.34
- 3.35
- 3.36
- 3.37
- 3.38
- 3.39
- 3.4
- 3.41
- 3.42
- 3.43
- 3.44
- 3.45
- 3.455
- 3.46
- 3.47
- 3.48
- 3.49
- 3.5
- 3.51
- 3.52
- 3.53
- 3.54
- 3.55
- 3.56
- 3.57
- 3.571
- 3.572
- 3.58
- 3.59
- 3.6
- 3.61
- 3.62
- 3.63
- 3.64
- 3.65
- 3.658
- 3.66
- 3.67
- 3.68
- 3.69
- 3.7
- 3.71
- 3.72
- 3.73
- 3.734
- 3.74
- 3.75
- 3.76
- 3.77
- 3.78
- 3.79
- 3.8
- 3.81
- 3.82
- 3.83
- 3.84
- 3.85
- 3.86
- 3.87
- 3.88
- 3.89
- 3.9
- 3.91
- 3.92
- 3.93
- 3.94
- 3.95
- 3.96
- 3.969
- 3.97
- 3.98
- 3.99
-
4～4.99
- 4
- 4.01
- 4.02
- 4.03
- 4.039
- 4.04
- 4.05
- 4.06
- 4.07
- 4.08
- 4.09
- 4.1
- 4.11
- 4.12
- 4.13
- 4.14
- 4.15
- 4.16
- 4.17
- 4.176
- 4.18
- 4.19
- 4.2
- 4.21
- 4.217
- 4.22
- 4.23
- 4.24
- 4.25
- 4.26
- 4.27
- 4.28
- 4.29
- 4.3
- 4.31
- 4.32
- 4.33
- 4.34
- 4.35
- 4.36
- 4.366
- 4.366
- 4.37
- 4.38
- 4.39
- 4.4
- 4.41
- 4.42
- 4.43
- 4.44
- 4.45
- 4.46
- 4.47
- 4.48
- 4.49
- 4.5
- 4.51
- 4.52
- 4.53
- 4.54
- 4.55
- 4.56
- 4.57
- 4.58
- 4.59
- 4.6
- 4.61
- 4.62
- 4.623
- 4.63
- 4.64
- 4.65
- 4.66
- 4.67
- 4.68
- 4.69
- 4.7
- 4.71
- 4.72
- 4.73
- 4.74
- 4.75
- 4.76
- 4.762
- 4.763
- 4.77
- 4.78
- 4.79
- 4.8
- 4.81
- 4.82
- 4.83
- 4.837
- 4.84
- 4.85
- 4.852
- 4.86
- 4.864
- 4.87
- 4.88
- 4.89
- 4.9
- 4.91
- 4.92
- 4.93
- 4.94
- 4.95
- 4.96
- 4.97
- 4.98
- 4.99
-
5～5.99
- 5
- 5/8(inch)
- 5/16(inch)
- 5/32(inch)
- 5/64(inch)
- 5.01
- 5.02
- 5.03
- 5.04
- 5.05
- 5.06
- 5.07
- 5.08
- 5.09
- 5.1
- 5.106
- 5.11
- 5.12
- 5.13
- 5.14
- 5.15
- 5.159
- 5.159
- 5.16
- 5.17
- 5.18
- 5.19
- 5.2
- 5.21
- 5.22
- 5.23
- 5.24
- 5.25
- 5.26
- 5.27
- 5.28
- 5.29
- 5.3
- 5.31
- 5.32
- 5.33
- 5.34
- 5.35
- 5.36
- 5.37
- 5.38
- 5.39
- 5.4
- 5.41
- 5.42
- 5.43
- 5.44
- 5.45
- 5.46
- 5.47
- 5.48
- 5.49
- 5.49999999999999
- 5.5
- 5.51
- 5.52
- 5.53
- 5.54
- 5.55
- 5.556
- 5.558
- 5.56
- 5.565
- 5.57
- 5.58
- 5.59
- 5.59999999999999
- 5.6
- 5.61
- 5.616
- 5.62
- 5.63
- 5.64
- 5.65
- 5.66
- 5.67
- 5.68
- 5.69
- 5.69999999999999
- 5.7
- 5.71
- 5.72
- 5.73
- 5.74
- 5.75
- 5.76
- 5.77
- 5.78
- 5.79
- 5.79999999999999
- 5.8
- 5.81
- 5.82
- 5.83
- 5.84
- 5.85
- 5.86
- 5.87
- 5.88
- 5.89
- 5.89999999999999
- 5.9
- 5.91
- 5.92
- 5.93
- 5.94
- 5.95
- 5.953
- 5.954
- 5.96
- 5.97
- 5.98
- 5.99
-
6～6.99
- 6
- 6.01
- 6.02
- 6.03
- 6.04
- 6.05
- 6.06
- 6.07
- 6.08
- 6.09
- 6.09999999999999
- 6.1
- 6.13
- 6.15
- 6.19999999999999
- 6.2
- 6.23
- 6.25
- 6.29999999999999
- 6.3
- 6.33
- 6.35
- 6.35
- 6.35 (¼")
- 6.365
- 6.375
- 6.39999999999999
- 6.4
- 6.43
- 6.45
- 6.48
- 6.49
- 6.49999999999999
- 6.5
- 6.51
- 6.52
- 6.528
- 6.53
- 6.55
- 6.59999999999999
- 6.6
- 6.63
- 6.65
- 6.69999999999999
- 6.7
- 6.73
- 6.746
- 6.747
- 6.75
- 6.8
- 6.83
- 6.85
- 6.89999999999999
- 6.9
- 6.93
- 6.95
- 6.98
- 6.99
-
7～7.99
- 7
- 7/16(inch)
- 7/32(inch)
- 7/64(inch)
- 7.01
- 7.02
- 7.03
- 7.04
- 7.05
- 7.06
- 7.07
- 7.08
- 7.09
- 7.09999999999999
- 7.1
- 7.13
- 7.14
- 7.144
- 7.145
- 7.15
- 7.19999999999999
- 7.2
- 7.23
- 7.25
- 7.29999999999999
- 7.3
- 7.33
- 7.35
- 7.36
- 7.38
- 7.39999999999999
- 7.4
- 7.43
- 7.45
- 7.48
- 7.49
- 7.49999999999999
- 7.5
- 7.51
- 7.52
- 7.53
- 7.54
- 7.541
- 7.541
- 7.55
- 7.59999999999999
- 7.6
- 7.63
- 7.65
- 7.69999999999999
- 7.7
- 7.73
- 7.75
- 7.79999999999999
- 7.8
- 7.83
- 7.85
- 7.89999999999999
- 7.9
- 7.93
- 7.937
- 7.938
- 7.94
- 7.95
- 7.953
- 7.98
- 7.99
-
8～8.99
- 8
- 8.01
- 8.02
- 8.03
- 8.04
- 8.05
- 8.06
- 8.07
- 8.08
- 8.09
- 8.09999999999999
- 8.1
- 8.13
- 8.15
- 8.19999999999999
- 8.2
- 8.23
- 8.25
- 8.29999999999998
- 8.3
- 8.33
- 8.334
- 8.35
- 8.39999999999998
- 8.4
- 8.43
- 8.433
- 8.45
- 8.48
- 8.49
- 8.5
- 8.50000000000001
- 8.51
- 8.52
- 8.53
- 8.55
- 8.58
- 8.59999999999998
- 8.6
- 8.63
- 8.65
- 8.69999999999998
- 8.7
- 8.73
- 8.731
- 8.733
- 8.75
- 8.79999999999998
- 8.8
- 8.80000000000001
- 8.83
- 8.85
- 8.89999999999998
- 8.9
- 8.90000000000001
- 8.93
- 8.95
- 8.98
- 8.99
-
9～9.99
- 9
- 9/16(inch)
- 9/32(inch)
- 9/64(inch)
- 9.01
- 9.02
- 9.03
- 9.04
- 9.05
- 9.06
- 9.07
- 9.08
- 9.09
- 9.09999999999998
- 9.1
- 9.128
- 9.129
- 9.13
- 9.15
- 9.19999999999998
- 9.2
- 9.20000000000001
- 9.21
- 9.23
- 9.24
- 9.25
- 9.26
- 9.29999999999998
- 9.3
- 9.30000000000001
- 9.33
- 9.347
- 9.35
- 9.36
- 9.38
- 9.39999999999998
- 9.4
- 9.40000000000001
- 9.43
- 9.45
- 9.48
- 9.49
- 9.49999999999998
- 9.5
- 9.50000000000001
- 9.51
- 9.52
- 9.525
- 9.53
- 9.54
- 9.55
- 9.59999999999998
- 9.6
- 9.60000000000001
- 9.63
- 9.65
- 9.69999999999998
- 9.7
- 9.70000000000001
- 9.73
- 9.75
- 9.79999999999998
- 9.8
- 9.80000000000001
- 9.83
- 9.85
- 9.89999999999998
- 9.9
- 9.90000000000001
- 9.92
- 9.921
- 9.922
- 9.93
- 9.95
- 9.97
- 9.98
- 9.99
-
10～10.99
- 10
- 10.01
- 10.02
- 10.03
- 10.04
- 10.05
- 10.06
- 10.07
- 10.08
- 10.09
- 10.1
- 10.13
- 10.15
- 10.2
- 10.23
- 10.25
- 10.3
- 10.319
- 10.32
- 10.33
- 10.35
- 10.4
- 10.43
- 10.45
- 10.48
- 10.49
- 10.5
- 10.51
- 10.52
- 10.53
- 10.55
- 10.6
- 10.63
- 10.65
- 10.7
- 10.716
- 10.716
- 10.72
- 10.73
- 10.75
- 10.8
- 10.83
- 10.85
- 10.9
- 10.93
- 10.95
- 10.98
- 10.99
-
11～11.99
- 11
- 11/32(inch)
- 11/64(inch)
- 11.01
- 11.02
- 11.03
- 11.04
- 11.05
- 11.06
- 11.07
- 11.08
- 11.09
- 11.1
- 11.11
- 11.112
- 11.113
- 11.13
- 11.133
- 11.15
- 11.2
- 11.22
- 11.23
- 11.24
- 11.25
- 11.3
- 11.33
- 11.35
- 11.36
- 11.38
- 11.4
- 11.43
- 11.45
- 11.48
- 11.49
- 11.5
- 11.509
- 11.509
- 11.51
- 11.52
- 11.53
- 11.55
- 11.56
- 11.6
- 11.63
- 11.65
- 11.7
- 11.73
- 11.75
- 11.8
- 11.83
- 11.85
- 11.9
- 11.906
- 11.908
- 11.91
- 11.93
- 11.95
- 11.98
- 11.99
-
12～12.99
- 12
- 12.01
- 12.02
- 12.03
- 12.04
- 12.05
- 12.06
- 12.07
- 12.08
- 12.09
- 12.1
- 12.15
- 12.2
- 12.25
- 12.3
- 12.303
- 12.304
- 12.35
- 12.4
- 12.45
- 12.48
- 12.49
- 12.5
- 12.51
- 12.52
- 12.55
- 12.6
- 12.65
- 12.7
- 12.7
- 12.75
- 12.8
- 12.85
- 12.9
- 12.95
- 12.96
- 12.98
- 12.99
-
13～13.9
- 13
- 13/32(inch)
- 13/64(inch)
- 13.096
- 13.097
- 13.1
- 13.2
- 13.25
- 13.3
- 13.4
- 13.43
- 13.49
- 13.494
- 13.5
- 13.5~25
- 13.55
- 13.6
- 13.7
- 13.8
- 13.89
- 13.891
- 13.891
- 13.9
-
14～14.96
- 14
- 14.1
- 14.2
- 14.25
- 14.287
- 14.288
- 14.29
- 14.3
- 14.4
- 14.5
- 14.6
- 14.684
- 14.684
- 14.7
- 14.75
- 14.8
- 14.9
- 14.96
-
15～15.9
- 15
- 15/32(inch)
- 15/64(inch)
- 15.083
- 15.1
- 15.2
- 15.25
- 15.3
- 15.4
- 15.479
- 15.5
- 15.55
- 15.6
- 15.7
- 15.75
- 15.8
- 15.875
- 15.875
- 15.9
-
16～16.9
- 16
- 16.1
- 16.2
- 16.271
- 16.3
- 16.4
- 16.5
- 16.6
- 16.67
- 16.7
- 16.8
- 16.9
-
17～17.9
- 17
- 17/32(inch)
- 17/64(inch)
- 17.1
- 17.2
- 17.3
- 17.4
- 17.463
- 17.5
- 17.55
- 17.6
- 17.7
- 17.8
- 17.9
-
18～18.9
- 18
- 18.1
- 18.2
- 18.258
- 18.3
- 18.4
- 18.5
- 18.6
- 18.654
- 18.7
- 18.8
- 18.9
-
19～19.9
- 19
- 19/64(inch)
- 19.05
- 19.1
- 19.2
- 19.3
- 19.4
- 19.5
- 19.55
- 19.6
- 19.7
- 19.8
- 19.9
-
20～20.5
- 20
- 20.5
-
21～21.5
- 21
- 21/64(inch)
- 21.5
-
22～22.5
- 22
- 22.5
-
23～23.5
- 23
- 23/64(inch)
- 23.5
-
24～24.5/24.7
- 24
- 24.5
- 24.5/24.7
-
25～25.5
- 25
- 25/64(inch)
- 25.5
-
26～26.5/26.7
- 26
- 26.5
- 26.5/26.7
-
27～27.5
- 27
- 27/64(inch)
- 27.5
-
28～28.5
- 28
- 28.5
-
29～29.5
- 29
- 29/64(inch)
- 29.5
-
30～30.5
- 30
- 30.5
-
31～31.5
- 31
- 31/64(inch)
- 31.5
-
32～32.5
- 32
- 32.5
-
33～33.5
- 33
- 33/64(inch)
- 33.5
-
34～34.5
- 34
- 34.5
-
35～35.5
- 35
- 35/64(inch)
- 35.5
-
36～36.5
- 36
- 36.5
-
37～37.5
- 37
- 37/64(inch)
- 37.5
-
38～38.5
- 38
- 38.5
-
39～39.5
- 39
- 39.5
-
40～40.5
- 40
- 40.5
-
41～41.5
- 41
- 41.5
-
42～42.5
- 42
- 42.5
-
43～43.5
- 43
- 43.5
-
44～44.5
- 44
- 44.5
-
45～45.5
- 45
- 45.5
-
46～46.5
- 46
- 46.5
-
47～47.5
- 47
- 47.5
-
48～48.5
- 48
- 48.5
-
49～49.5
- 49
- 49.5
-
50
-
-
Overall Length L(mm)
-
Groove Length L(mm)
-
0～0.9
- 0
- 0.015
- 0.025
- 0.04
- 0.05
- 0.06
- 0.075
- 0.08
- 0.09
- 0.1
- 0.12
- 0.14
- 0.15
- 0.16
- 0.18
- 0.2
- 0.22
- 0.24
- 0.25
- 0.3
- 0.33
- 0.4
- 0.44
- 0.48
- 0.5
- 0.55
- 0.6
- 0.7
- 0.8
- 0.88
- 0.9
-
1～1.98
- 1
- 1.1
- 1.2
- 1.3
- 1.4
- 1.5
- 1.6
- 1.65
- 1.7
- 1.8
- 1.9
- 1.98
-
2～2.97
- 2
- 2.1
- 2.2
- 2.3
- 2.31
- 2.4
- 2.5
- 2.6
- 2.64
- 2.7
- 2.8
- 2.9
- 2.97
-
3～3.9
- 3
- 3.1
- 3.2
- 3.3
- 3.4
- 3.5
- 3.6
- 3.7
- 3.8
- 3.9
-
4～4.9
- 4
- 4.1
- 4.2
- 4.3
- 4.4
- 4.5
- 4.6
- 4.7
- 4.8
- 4.9
-
5～5.8
- 5
- 5.1
- 5.2
- 5.3
- 5.4
- 5.5
- 5.6
- 5.7
- 5.8
-
6～6.8
- 6
- 6.2
- 6.3
- 6.4
- 6.5
- 6.6
- 6.8
-
7～7.8
- 7
- 7.2
- 7.3
- 7.4
- 7.5
- 7.6
- 7.8
-
8～8.8
- 8
- 8.2
- 8.3
- 8.4
- 8.5
- 8.6
- 8.8
-
9～9.8
- 9
- 9.2
- 9.3
- 9.4
- 9.5
- 9.6
- 9.8
-
10～10.8
- 10
- 10..1
- 10.1
- 10.2
- 10.4
- 10.5
- 10.6
- 10.8
-
11～11.8
- 11
- 11.1
- 11.2
- 11.3
- 11.4
- 11.6
- 11.7
- 11.8
-
12～12.8
- 12
- 12.2
- 12.3
- 12.5
- 12.6
- 12.8
-
13～13.8
- 13
- 13.1
- 13.2
- 13.5
- 13.8
-
14～14.9
- 14
- 14.3
- 14.4
- 14.5
- 14.8
- 14.9
-
15～15.8
- 15
- 15.3
- 15.6
- 15.8
-
16～16.8
- 16
- 16.1
- 16.2
- 16.5
- 16.7
- 16.8
-
17～17.8
- 17
- 17.1
- 17.2
- 17.3
- 17.4
- 17.6
- 17.8
-
18～18.9
- 18
- 18.5
- 18.6
- 18.8
- 18.9
-
19～19.8
- 19
- 19.2
- 19.4
- 19.5
- 19.7
- 19.8
-
20～20.7
- 20
- 20.3
- 20.4
- 20.7
-
21～21.8
- 21
- 21.2
- 21.4
- 21.6
- 21.8
-
22～22.8
- 22
- 22.1
- 22.2
- 22.5
- 22.8
-
23～23.9
- 23
- 23.3
- 23.4
- 23.9
-
24～24.8
- 24
- 24.3
- 24.5
- 24.6
- 24.8
-
25～25.8
- 25
- 25.2
- 25.5
- 25.7
- 25.8
-
26～26.6
- 26
- 26.1
- 26.3
- 26.4
- 26.6
-
27～27.8
- 27
- 27.6
- 27.8
-
28～28.8
- 28
- 28.1
- 28.2
- 28.5
- 28.8
-
29～29.4
- 29
- 29.3
- 29.4
-
30～30.8
- 30
- 30.6
- 30.8
-
31～31.7
- 31
- 31.2
- 31.5
- 31.7
-
32～32.8
- 32
- 32.3
- 32.4
- 32.8
-
33～33.8
- 33
- 33.6
- 33.8
-
34～34.8
- 34
- 34.1
- 34.4
- 34.5
- 34.8
-
35～35.5
- 35
- 35.3
- 35.5
-
36～36.8
- 36
- 36.5
- 36.8
-
37～37.5
- 37
- 37.5
-
38～38.3
- 38
- 38.3
-
39～39.8
- 39
- 39.8
-
40～40.5
- 40
- 40.5
-
41～41.3
- 41
- 41.3
-
42～42.8
- 42
- 42.8
-
43～43.5
- 43
- 43.2
- 43.5
-
44～44.3
- 44
- 44.3
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
-
80
-
81
-
82
-
83
-
84
-
85
-
86
-
87
-
88
-
89
-
90
-
91
-
92
-
93
-
94
-
95
-
96
-
97
-
98
-
99
-
100
-
101
-
102
-
103
-
104
-
105
-
106
-
107
-
108
-
109
-
110
-
111
-
112
-
113
-
114
-
115
-
116
-
117
-
118
-
119
-
120
-
121
-
122
-
123
-
124
-
125
-
126
-
127
-
128
-
130
-
131
-
132
-
133
-
134
-
135
-
136
-
137
-
138
-
140
-
143
-
144
-
145
-
146
-
148
-
149
-
150
-
152
-
153
-
154
-
155
-
156
-
159
-
160
-
161
-
162
-
163
-
165
-
167
-
168
-
169
-
170
-
171
-
173
-
175
-
176
-
177
-
180
-
182
-
183
-
184
-
185
-
188
-
189
-
190
-
195
-
196
-
197
-
198
-
200
-
205
-
207
-
208
-
210
-
212
-
214
-
215
-
216
-
218
-
219
-
220
-
223
-
224
-
225
-
227
-
230
-
231
-
232
-
234
-
240
-
242
-
248
-
250
-
252
-
253
-
258
-
260
-
263
-
264
-
265
-
270
-
272
-
274
-
277
-
280
-
282
-
290
-
292
-
295
-
300
-
302
-
310
-
315
-
318
-
322
-
323
-
327
-
330
-
337
-
340
-
343
-
350
-
360
-
372
-
385
-
400
-
402
-
432
-
440
-
460
-
512
-
550
-
692
-
860
-
1030
-
-
work material
- general steel
- Quenched and tempered steel
- high hardness steel
- Stainless Steel
- Cast Iron
- Aluminum
- Titanium
- Copper
- Graphite
- Resin
- Machinable Ceramics
-
Shank Type
-
End Mill Shank
-
straight shank
-
Taper shank
-
End Mill Shank
-
Tool Material Type
- High-speed steel
- Carbide
- PCD
-
With/without Oil Hole
-
Coating Y/N
- Available
- NA
-
Coating Type
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy