Holding Tools for O.D. Tuning（Applicable Tip Shape：D (55° Diamond-Shape) Page2）

• You can add up to 6 items per a category to the compare list. Compare

  

  Coromant Capto, Cutting Head, CoroTurn RC Double Clamp, DDMNL

  SANDVIK

  Coromant Capto is a unique coupling with a unique polygonal shapeThe quick change of the lathe greatly contributes to the improvement of the user's productivity.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	-	Left-hand	Outer Diameter / End Face / Profiling / Chamfer / Post-Grinding	Cable clamp	-	-

  From: 13,931,828 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Coromant Capto, Cutting Head, CoroTurn, Ceramic Inserts, CDJNR/L-15-4

  SANDVIK

  Coromant Capto is a unique coupling with a unique polygonal shapeThe quick change of the lathe greatly contributes to the improvement of the user's productivity.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	-	Right-hand / Left-hand	Outer Diameter / Profiling / Chamfer	-	-	-

  From: 10,902,832 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Coromant Capto, Cutting Head, CoroTurn, Ceramic Inserts, DDJNR/L-15-2

  SANDVIK

  Coromant Capto is a unique coupling with a unique polygonal shapeThe quick change of the lathe greatly contributes to the improvement of the user's productivity.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	-	Right-hand / Left-hand	Outer Diameter / Profiling / Chamfer	Cable clamp	-	-

  From: 10,902,832 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Sandvik CoroTurn 107, Lever Clamp, High Pressure Coolant Specification, C-PDJNR/L-HP

  SANDVIK

  Coromant Capto is a unique coupling with a unique polygonal shapeThe quick change of the lathe greatly contributes to the improvement of the user's productivity.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	-	Right-hand / Left-hand	Outer Diameter / End Face / Chamfer	Lever lock	-	-

  From: 22,638,820 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Sandvik CoroTurn 107, Lever Clamp, High Pressure Coolant Specification, C-PDMNR/L-15HP

  SANDVIK

  Coromant Capto is a unique coupling with a unique polygonal shapeThe quick change of the lathe greatly contributes to the improvement of the user's productivity.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	-	Right-hand / Left-hand	Outer Diameter / Profiling / Chamfer	Lever lock	-	-

  From: 22,638,820 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Outer Diameter Turning, Shank Tool Bit, CoroTurn 107 Screw Clamp, SDACR/L-S

  SANDVIK

  For internal and external turning of slender partsHighly repeatable insert exchange improves productivity and achieves high quality

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	Pozidriv	Right-hand / Left-hand	Outer Diameter / Profiling	Clamp-on	8	8

  From: 3,339,521 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Outer Diameter Turning, Shank Tool Bit, CoroTurn 107 Screw Clamp, SDJCR/L

  SANDVIK

  For internal and external turning of slender partsHighly repeatable insert exchange improves productivity and achieves high quality

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	Pozidriv	Right-hand	Outer Diameter / Profiling	Clamp-on	12 ～ 16	12 ～ 16

  From: 4,179,211 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Outer Diameter Turning, Shank Tool Bit, CoroTurn 107 Screw Clamp, SDJCR/L-S

  SANDVIK

  For internal and external turning of slender partsHighly repeatable insert exchange improves productivity and achieves high quality

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	Pozidriv	Left-hand	Outer Diameter / Profiling	Clamp-on	8	8

  From: 3,339,521 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Outer Diameter Turning, Shank Tool Bit, CoroTurn 107 Screw Clamp, SDNCN-S

  SANDVIK

  For internal and external turning of slender partsHighly repeatable insert exchange improves productivity and achieves high quality

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	Pozidriv	No-hand	Outer Diameter / Profiling / Post-Grinding	Clamp-on	-	-

  From: 3,339,521 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Outer Diameter Turning - Tool Bit For Ceramic Inserts, Shank Tool Bit, CDJNR/L -4

  SANDVIK

  Stable clamping for both non-hole inserts and inserts with dimple holes

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	-	Right-hand / Left-hand	Outer Diameter / Profiling / Chamfer	Clamp-on	32	25 ～ 32

  From: 5,451,962 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Outer Diameter Turning - Tool Bit For Negative Inserts, CoroTurn HP Cutting Head, C-PDUNR/L-HP

  SANDVIK

  Excellent chip control and process stability for best part qualityAccurate high-precision coolant supply controls chip control and provides stable machining

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	Negative	Right-hand / Left-hand	Outer Diameter	Pin Lock	-	-

  From: 17,567,820 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Outer Diameter Turning - Tool Bit For Negative Inserts, CoroTurn HP Cutting Head, T-Max P Lever Clamp, High Pressure Coolant Specification, C-PDJNR/L-15HP

  SANDVIK

  Sandvik Outer Diameter Holder Outer Diameter/Negative/Chip Bite CoroTurn HP Cutting Head C-PDJNR/L-15HP

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	Negative	Right-hand / Left-hand	Outer Diameter / Profiling / Chamfer	Pin Lock	-	-

  From: 12,668,141 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Sandvik, T-Max P, Cutting Unit, Turning, DDHNR/L

  SANDVIK

  Coromant Capto is a unique coupling with a unique polygonal shapeThe quick change of the lathe greatly contributes to the improvement of the user's productivity.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	Negative	Right-hand / Left-hand	Outer Diameter / Profiling	Cable clamp	-	-

  From: 8,453,730 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Outer Diameter Turning - Tool Bit For Negative Inserts, Coromant Capto Cutting Head, CoroTurn RC Double Clamp, DDUNR/L

  SANDVIK

  Sandvik Outer Diameter Holder Outer Diameter/Negative/Chip Bite Coromant Capto Cutting Head C-DDUNR/L

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	Negative	Right-hand / Left-hand	End Face	Cable clamp	-	-

  From: 6,975,588 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Sandvik, T-Max P, Cutting Unit, Turning, PDJNR/L

  SANDVIK

  Coromant Capto is a unique coupling with a unique polygonal shapeThe quick change of the lathe greatly contributes to the improvement of the user's productivity.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	Negative	Right-hand / Left-hand	Outer Diameter / Profiling / Chamfer	Pin Lock	-	-

  From: 9,698,651 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Outer-Diameter Turning - Shank Tool Bit For Negative Inserts, CoroTurn RC Double Clamp, DDNNN

  SANDVIK

  [Features]A high-rigidity double clamp holder for turning. Extremely easy to handle. Swap out inserts and shims using just the one wrench. Inserts are easy to swap out, even from the backside of the holder. A wide variety of insert types can be mounted by swapping out the clamp set and shims. Supports outer-diameter turning (bore-cutting) and the use of negative inserts. Supports everything from roughing through to finishing.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	Negative	No-hand	Outer Diameter / Chamfer / Post-Grinding	Cable clamp	32	25

  From: 4,756,063 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Outer-Diameter Turning - Tool Bit For Positive Inserts, CoroTurn TR Shank Tool Bit, TR-D13NCN

  SANDVIK

  [Features]Extremely high clamp rigidityThe T-rail interface ensures minimal undercutting on the restraint surface, maintaining long-term machining precisionHigh-precision machiningFor profile turning.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	Pozidriv	No-hand	Outer Diameter / Profiling / Post-Grinding	Clamp-on	32	25

  From: 4,252,526 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Outer Diameter Turning - Tool Bit For Positive Inserts, CoroTurn TR Shank Tool Bit, TR-D13NCN-S

  SANDVIK

  Excellent chip control and process stability for best part quality

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	Pozidriv	No-hand	Outer Diameter / Profiling / Post-Grinding	Clamp-on	-	-

  From: 3,339,521 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Sandvik CoroTurn 107, Screw Clamp, SDJCR/L

  SANDVIK

  For internal and external turning of slender partsHighly repeatable insert exchange improves productivity and achieves high quality

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	Pozidriv	Right-hand / Left-hand	Outer Diameter / End Face / Chamfer	Clamp-on	-	-

  From: 7,817,848 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Sandvik CoroTurn 107, Screw Clamp, SDNCN

  SANDVIK

  For internal and external turning of slender partsHighly repeatable insert exchange improves productivity and achieves high quality

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	Pozidriv	No-hand	Outer Diameter / Chamfer / Post-Grinding	Clamp-on	-	-

  From: 8,453,730 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Outer Diameter Turning - Tools For Compact Lathe, Shank Tool Bit, Short Tool Bit For QS Holding System, QS- SDJCR

  SANDVIK

  Sandvik Outer Holder Tool for Small Lathe Shank Bit Short Bit for QS Holding System QS- SDJCR

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	-	Right-hand	Outer Diameter / Profiling	Clamp-on	-	-

  From: 4,179,211 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Shank Tool Bit, Outer Diameter Turning Compact Lathes, QS Series, Short Tool Bit, QS-SDJCR1012E

  SANDVIK

  Quick change system specially developed for small automatic lathesA single screw removes the holder and pulls out the wedge at the same time for quick tool changes and setup

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	-	Right-hand	Outer Diameter / Profiling	Clamp-on	10 ～ 16	12 ～ 16

  From: 9,128,618 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Shank Tool Bit, Outer Diameter Turning Compact Lathes, QS Series, Short Tool Bit, QS-SDNCN-E11

  SANDVIK

  Quick change system specially developed for small automatic lathesA single screw removes the holder and pulls out the wedge at the same time for quick tool changes and setup

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	-	No-hand	Outer Diameter / Profiling / Post-Grinding	Clamp-on	12 ～ 16	12 ～ 16

  From: 4,307,846 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Outer Diameter Turning - Tool Bit For Positive Inserts, Coromant Capto Cutting Head, TR-C-D13JCR/L

  SANDVIK

  Coromant Capto is a unique coupling with a unique polygonal shapeThe quick change of the lathe greatly contributes to the improvement of the user's productivity.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	Pozidriv	Right-hand / Left-hand	Outer Diameter / End Face / Profiling	Clamp-on	-	-

  From: 7,915,072 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Outer Diameter Turning - Tool Bit For Positive Inserts, Coromant Capto Cutting Head, TR-C-D13MCL

  SANDVIK

  Coromant Capto is a unique coupling with a unique polygonal shapeThe quick change of the lathe greatly contributes to the improvement of the user's productivity.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	Pozidriv	Left-hand	Outer Diameter / End Face / Profiling	Clamp-on	-	-

  From: 10,095,240 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Outer Diameter Turning - Tool Bit For Positive Inserts, Coromant Capto Cutting Head, TR-C-D13NCN

  SANDVIK

  Coromant Capto is a unique coupling with a unique polygonal shapeThe quick change of the lathe greatly contributes to the improvement of the user's productivity.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	Pozidriv	No-hand	Outer Diameter / Profiling / Post-Grinding	Clamp-on	-	-

  From: 7,915,072 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Holder For Front-Turning, DS-SDU-ACH

  NGK SPARK PLUG

  [Features]· DS holder with a center-height adjustment feature: The height of the blade tip can be easily adjusted with a single wrench by employing an original center-height adjustment feature (center-height adjustment range: 0 to 0.2 mm)· Reduces the time spent on achieving precision.· Improved damping performance with an optimal design

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	-	Left-hand	-	-	-	-

  From: 10,696,450 VND
  Days to Ship: Số ngày giao hàng: 15 Day(s) or more

  15 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Holder For Front-Turning, DS-SDX

  NGK SPARK PLUG

  [Features]·By adopting a unique center height adjustment mechanism, you can easily adjust the height of the cutting edge with a single wrench! Reduces the time spent for accuracy!·DS Holder

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	-	Left-hand	-	-	-	-

  From: 6,413,513 VND
  Days to Ship: Số ngày giao hàng: 15 Day(s) or more

  15 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Holder For Front-Turning, SDJC-N/SDJC

  NGK SPARK PLUG

  [Features]·By adopting a unique center height adjustment mechanism, you can easily adjust the height of the cutting edge with a single wrench! Reduces the time spent for accuracy!

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	-	Right-hand / Left-hand	-	-	-	-

  From: 3,285,973 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Holder For Front-Turning, SDJC-N-F

  NGK SPARK PLUG

  [Features]·By adopting a unique center height adjustment mechanism, you can easily adjust the cutting edge height with a single wrench!·Reduce time spent on accuracy!·Shaft Supports

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	-	Right-hand	-	-	-	-

  From: 4,122,640 VND
  Days to Ship: Số ngày giao hàng: 15 Day(s) or more

  15 Day(s) or more

BrandNhãn hiệu
Product SeriesDòng sản phẩm
From
Days to ShipSố ngày giao hàng
Applicable Tip Shape
Applicable Chip Clearance Angle
Selfishly
Application
Clamp Shape
Shank height(mm)
Shank width(mm)

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
BrandNhãn hiệu	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	NGK SPARK PLUG	NGK SPARK PLUG	NGK SPARK PLUG	NGK SPARK PLUG
Product SeriesDòng sản phẩm	Coromant Capto, Cutting Head, CoroTurn RC Double Clamp, DDMNL	Coromant Capto, Cutting Head, CoroTurn, Ceramic Inserts, CDJNR/L-15-4	Coromant Capto, Cutting Head, CoroTurn, Ceramic Inserts, DDJNR/L-15-2	Sandvik CoroTurn 107, Lever Clamp, High Pressure Coolant Specification, C-PDJNR/L-HP	Sandvik CoroTurn 107, Lever Clamp, High Pressure Coolant Specification, C-PDMNR/L-15HP	Outer Diameter Turning, Shank Tool Bit, CoroTurn 107 Screw Clamp, SDACR/L-S	Outer Diameter Turning, Shank Tool Bit, CoroTurn 107 Screw Clamp, SDJCR/L	Outer Diameter Turning, Shank Tool Bit, CoroTurn 107 Screw Clamp, SDJCR/L-S	Outer Diameter Turning, Shank Tool Bit, CoroTurn 107 Screw Clamp, SDNCN-S	Outer Diameter Turning - Tool Bit For Ceramic Inserts, Shank Tool Bit, CDJNR/L -4	Outer Diameter Turning - Tool Bit For Negative Inserts, CoroTurn HP Cutting Head, C-PDUNR/L-HP	Outer Diameter Turning - Tool Bit For Negative Inserts, CoroTurn HP Cutting Head, T-Max P Lever Clamp, High Pressure Coolant Specification, C-PDJNR/L-15HP	Sandvik, T-Max P, Cutting Unit, Turning, DDHNR/L	Outer Diameter Turning - Tool Bit For Negative Inserts, Coromant Capto Cutting Head, CoroTurn RC Double Clamp, DDUNR/L	Sandvik, T-Max P, Cutting Unit, Turning, PDJNR/L	Outer-Diameter Turning - Shank Tool Bit For Negative Inserts, CoroTurn RC Double Clamp, DDNNN	Outer-Diameter Turning - Tool Bit For Positive Inserts, CoroTurn TR Shank Tool Bit, TR-D13NCN	Outer Diameter Turning - Tool Bit For Positive Inserts, CoroTurn TR Shank Tool Bit, TR-D13NCN-S	Sandvik CoroTurn 107, Screw Clamp, SDJCR/L	Sandvik CoroTurn 107, Screw Clamp, SDNCN	Outer Diameter Turning - Tools For Compact Lathe, Shank Tool Bit, Short Tool Bit For QS Holding System, QS- SDJCR	Shank Tool Bit, Outer Diameter Turning Compact Lathes, QS Series, Short Tool Bit, QS-SDJCR1012E	Shank Tool Bit, Outer Diameter Turning Compact Lathes, QS Series, Short Tool Bit, QS-SDNCN-E11	Outer Diameter Turning - Tool Bit For Positive Inserts, Coromant Capto Cutting Head, TR-C-D13JCR/L	Outer Diameter Turning - Tool Bit For Positive Inserts, Coromant Capto Cutting Head, TR-C-D13MCL	Outer Diameter Turning - Tool Bit For Positive Inserts, Coromant Capto Cutting Head, TR-C-D13NCN	Holder For Front-Turning, DS-SDU-ACH	Holder For Front-Turning, DS-SDX	Holder For Front-Turning, SDJC-N/SDJC	Holder For Front-Turning, SDJC-N-F
From	13,931,828 VND	10,902,832 VND	10,902,832 VND	22,638,820 VND	22,638,820 VND	3,339,521 VND	4,179,211 VND	3,339,521 VND	3,339,521 VND	5,451,962 VND	17,567,820 VND	12,668,141 VND	8,453,730 VND	6,975,588 VND	9,698,651 VND	4,756,063 VND	4,252,526 VND	3,339,521 VND	7,817,848 VND	8,453,730 VND	4,179,211 VND	9,128,618 VND	4,307,846 VND	7,915,072 VND	10,095,240 VND	7,915,072 VND	10,696,450 VND	6,413,513 VND	3,285,973 VND	4,122,640 VND
Days to ShipSố ngày giao hàng	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more	9 Day(s) or more	7 Day(s) or more	9 Day(s) or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more	9 Day(s)	9 Day(s)	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more	8 Day(s) or more	9 Day(s) or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more	15 Day(s) or more	15 Day(s) or more	7 Day(s) or more	15 Day(s) or more
Applicable Tip Shape	D (55° Diamond-Shape)	D (55° Diamond-Shape)	D (55° Diamond-Shape)	D (55° Diamond-Shape)	D (55° Diamond-Shape)	D (55° Diamond-Shape)	D (55° Diamond-Shape)	D (55° Diamond-Shape)	D (55° Diamond-Shape)	D (55° Diamond-Shape)	D (55° Diamond-Shape)	D (55° Diamond-Shape)	D (55° Diamond-Shape)	D (55° Diamond-Shape)	D (55° Diamond-Shape)	D (55° Diamond-Shape)	D (55° Diamond-Shape)	D (55° Diamond-Shape)	D (55° Diamond-Shape)	D (55° Diamond-Shape)	D (55° Diamond-Shape)	D (55° Diamond-Shape)	D (55° Diamond-Shape)	D (55° Diamond-Shape)	D (55° Diamond-Shape)	D (55° Diamond-Shape)	D (55° Diamond-Shape)	D (55° Diamond-Shape)	D (55° Diamond-Shape)	D (55° Diamond-Shape)
Applicable Chip Clearance Angle	-	-	-	-	-	Pozidriv	Pozidriv	Pozidriv	Pozidriv	-	Negative	Negative	Negative	Negative	Negative	Negative	Pozidriv	Pozidriv	Pozidriv	Pozidriv	-	-	-	Pozidriv	Pozidriv	Pozidriv	-	-	-	-
Selfishly	Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand	Left-hand	No-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	No-hand	No-hand	No-hand	Right-hand / Left-hand	No-hand	Right-hand	Right-hand	No-hand	Right-hand / Left-hand	Left-hand	No-hand	Left-hand	Left-hand	Right-hand / Left-hand	Right-hand
Application	Outer Diameter / End Face / Profiling / Chamfer / Post-Grinding	Outer Diameter / Profiling / Chamfer	Outer Diameter / Profiling / Chamfer	Outer Diameter / End Face / Chamfer	Outer Diameter / Profiling / Chamfer	Outer Diameter / Profiling	Outer Diameter / Profiling	Outer Diameter / Profiling	Outer Diameter / Profiling / Post-Grinding	Outer Diameter / Profiling / Chamfer	Outer Diameter	Outer Diameter / Profiling / Chamfer	Outer Diameter / Profiling	End Face	Outer Diameter / Profiling / Chamfer	Outer Diameter / Chamfer / Post-Grinding	Outer Diameter / Profiling / Post-Grinding	Outer Diameter / Profiling / Post-Grinding	Outer Diameter / End Face / Chamfer	Outer Diameter / Chamfer / Post-Grinding	Outer Diameter / Profiling	Outer Diameter / Profiling	Outer Diameter / Profiling / Post-Grinding	Outer Diameter / End Face / Profiling	Outer Diameter / End Face / Profiling	Outer Diameter / Profiling / Post-Grinding	-	-	-	-
Clamp Shape	Cable clamp	-	Cable clamp	Lever lock	Lever lock	Clamp-on	Clamp-on	Clamp-on	Clamp-on	Clamp-on	Pin Lock	Pin Lock	Cable clamp	Cable clamp	Pin Lock	Cable clamp	Clamp-on	Clamp-on	Clamp-on	Clamp-on	Clamp-on	Clamp-on	Clamp-on	Clamp-on	Clamp-on	Clamp-on	-	-	-	-
Shank height(mm)	-	-	-	-	-	8	12 ～ 16	8	-	32	-	-	-	-	-	32	32	-	-	-	-	10 ～ 16	12 ～ 16	-	-	-	-	-	-	-
Shank width(mm)	-	-	-	-	-	8	12 ～ 16	8	-	25 ～ 32	-	-	-	-	-	25	25	-	-	-	-	12 ～ 16	12 ～ 16	-	-	-	-	-	-	-

Loading...Tải…